Machinery & Equipment Co
Contact
About
Machinery & Equipment Co. - Since 1938, the largest dealer in the western United States for used food, mining, chemical and pharmaceutical machinery.Liquidators of plants and process equipment worldwide.
Products & Services
- Appraisers, Machinery & Equipment
- Chemical, Petroleum & Gas Processing Equipment
- Filters
- Food Processing Equipment
- Laboratory Equipment
- Milling Machinery
- Mining Equipment
- Packaging Equipment
- Pharmaceutical Equipment
- Plant Liquidations
- Tanks
Associations & Affiliations
3800 listings in 367 categories
60 Hz Three Phase Transformers
4 Results
9 KVA 480 Primary, 208Y/120 Secondary, Acme #T-2A-53310-1S, General Purpose Transformer
Category: 60 Hz Three Phase Transformers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Acme
ACME Purpose Transformer, catalog number T-2A-53310-1S. Unit is rated for 9.0 KVA, 3-phase, 60 Hz. Primary voltage of 480, secondary voltage of 208Y/120. Unit is in good condition., Basis: FOB.
Machinery & Equipment Co has 3 more
listings in 60 Hz Three Phase Transformers.
3 HP 1760 RPM Stainless Motor Inc. Motor Inc, inline planetary gear motor, 208/230/460 Volts, unused
Category: AC Gear Motors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Stainless Motor Inc.
Unused Inline Planetary Gearmotor stainless steel manufactured by Stainless Motor Inc., cast T304 housing with sanitary foot mounts, 3 HP, 208/230/460 Volt, 1760 RPM, 3-phase with gear ratio of 3.67:1., HP: 3, Materials of Construction: 304 Stainless Steel, Basis: FOB.
Machinery & Equipment Co has 1 more
listing in AC Gear Motors.
22 KW Gentec #40E232X157G1, Induction Generator, 230/460 V, 73/38 Amps, 1800 RPM, 3 phase Hydraulics
Category: AC Generator Ends
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Gentec
Gentec mdl 40E232X157G1 induction generator, 230/460 volt, 73/38 Amp, 1800 RPM, 3 phase., KW: 22, Basis: FOB.
Allen-Bradley #MPL-8430P-MK24AA, AC Servo motor, 5000 RPM, 460 Volts
Category: AC Servo Motors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Allen-Bradley
Frame: MPL-8430P-MK24AA
(9) Allen Bradley AC servo motor model MPL-8430P-MK24AA, series A, maximum speed 5000 RPM, continuous stall torque 6.55/58Nm/lb.in, 460 volt, 3 phase, with Alpha gear reducer Type LP 090-M01-110-000, ratio of 10:1., Basis: Each, FOB.
Machinery & Equipment Co has 1 more
listing in AC Servo Motors.
1/2 HP Allen-Bradley, Powerflex 70, AC drive, 240 Volts (2 available)
Category: AC Variable Frequency Drives
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Allen-Bradley
Model: POWERFLEX 70
(2) Allen Bradley PowerFlex70 AC Drive, 240 (208) VAC, 3-phase, 2.50 AMPS, 0.50 HP Normal Duty, 0.33 HP Heavy Duty, cateloge number 20A B 2P2F 0 AYNNNCO., HP: 1/2, Basis: Each, FOB.
Machinery & Equipment Co has 6 more
listings in AC Variable Frequency Drives.
5" width x 84" L Accumulation Table, Stainless Steel, Inline, Multi-directional, 5" width x 84" L infeed section, 1/2 HP, 1750 RPM, 90 V
Category: Accumulation Tables
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel inline multi-directional accumulation table. approximately 5" wide x 84" long infeed section, has three (3) additional lanes each measuring approximately 1" wide x 32" guides for 5 and 10Mmm bottles. Unit has food grade chain belt, four (3) independently driven motors each 1/2 hp 1750 rpm, 90 volt. ...more
Machinery & Equipment Co has 23 more
listings in Accumulation Tables.
BAR #GTE-110, Pneumatic Quarter-Turn Actuator, Single-acting, 10 bar, 7 springs, V22 pinion
Category: Actuators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bar
Model: GTE 110
BAR GTE 110 pneumatic quarter-turn actuator, Type GTE - single-acting (spring return) max PSI 10bar, pivoting angle 90-degree, number of springs 7, pinion model V22, mounting version F, double limit stops B., Basis: FOB.
Machinery & Equipment Co has 2 more
listings in Actuators.
Agitator Mixers and Blenders
34 Results
.25 HP Brawn, Agitator Mixer, Stainless Steel, 5/8" diameter x 4' L shaft, 1725 RPM, 230/460 V, (1) propeller, square flange
Category: Agitator Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Brawn
Brawn agitator mixer stainless steel with 5/8" diameter x 4' long shaft, (1) propeller. Unit is 0.25 HP, 230/460 Volt, 1725 RPM. Mixer is flange mounted with approximately "square flange"., HP: 0.25, Basis: FOB, Shaft Size: 5/8" Diameter X 48" Long, Mounting: Square Flange, Blade Type: Propeller.
Machinery & Equipment Co has 33 more
listings in Agitator Mixers and Blenders.
Air and Gas Scrubbers
3 Results
American Air Scrubbers, air scrubbing tower, 24" x 24" x 10' H Stainless Steel housing
Category: Air and Gas Scrubbers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: American
American Air Scrubbers model Aria 2000 air scrubbing tower with approximately 24" x 24" x 10' high stainless steel housing. Internally includes Cincinnati Model number 15643T31/2 fan, serial number 2110945-04. Fan used to pull air through bottom mounted HEPA filter and (36) Philips TUV PL-L 60W/4P HO 60w UVC ...more
Machinery & Equipment Co has 2 more
listings in Air and Gas Scrubbers.
Fumex, Air Cleaner, 115 V, 2 Amps, 1 Ph., 60 Hz
Category: Air Cleaners
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fumex
Fumex air cleaner, Basis: FOB.
Air Cooled Condensers
4 Results
Copelmatic #CBAM-0303-CAB-001, Refrigeration Condenser, R12, 5 Ton capacity, (1) fan, 3 HP, 230 VAC
Category: Air Cooled Condensers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Copelmatic
Model: CBAM-0303-CAB-001
Copelametic refrigeration condenser, unit is Model CBAM-0303-CAB-001, takes R12 refrigerant. Unit has nominal HP of 3 HP, 230Vac single phase, estimated 5 ton capacity., Basis: FOB, Refrigerant: R12.
Machinery & Equipment Co has 3 more
listings in Air Cooled Condensers.
Air Cooler Type Heat Exchangers
3 Results
469 sq.ft., 150 psi, Fabsco Fin Air LLC, fin fan cooler, air-fin heat exchanger, (2) 7.5 HP, 2013
Category: Air Cooler Type Heat Exchangers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fabsco
Year: 2013
Fabsco Air-Fin Heat Exchanger, approximately 469 square feet, carbon steel tubes in galvanized housing. (3) tube sections with a total of (112) 1" diameter x 192" long carbon steel tubes rated 150 psi at -20 to 450 degrees F. (2) approximately 6' diameter fans, each driven by a 7.5 HP motor. (6) 2" inlets, (6) 2" ...more
Machinery & Equipment Co has 2 more
listings in Air Cooler Type Heat Exchangers.
Magna, Carbon Steel Air Receiver Tank, 35 gallon, 16" diameter x 4' straight side, 0.187" shell & head thickness, 125 psi @ 450 F, 1983
Category: Air Receivers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Magna
Year: 1983
Magna 35 gallon carbon steel air receiver tank. Unit measures 16" diameter x 4' straight side, rated for 125 PSI at 450 degrees Fahrenheit, shell and head thickness of 0.187, Manufactured in 1983; Serial number 5949., Materials of Construction: Carbon Steel, Internal Pressure: 125 PSI, Basis: FOB, Gallons: 35.
Machinery & Equipment Co has 2 more
listings in Air Receivers.
20 gallon #FA56C, Aluminum Tank, 2' diameter x 1' deep, tilt type, 1/2 HP, 1725 RPM, 115/230 V
Category: Aluminum Tanks (Vessels)
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Tank, 20 gallon, aluminum. Unit measures 24" diameter x 20" deep and is tilt type. Unit has spiral scrape surface blade, with cover. Unit is 1/2 HP, 1725 RPM, 115/230Volt. Unit is Model FA56C., Materials of Construction: Aluminum, Basis: FOB, Gallons: 20.
Machinery & Equipment Co has 1 more
listing in Aluminum Tanks (Vessels).
hravy duty apron feeder w/
Category: Apron Feeders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Heavy Duty Apron Feeder with Hopper.
1 Ton, Dayton #4Z328A, Arbor Press, Hand Bench, Heavy Duty, 1" ram, 7" diameter, 5" over table
Category: Arbor Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Dayton
Model: 4Z328A
Dayton Model number 4Z328A Arbor Hand Bench Heavy Duty Press, rated for a capacity of 1 ton, Ram Width 1", maximum work diameter 7". Capacity over Table 5"., Basis: FOB.
Machinery & Equipment Co has 4 more
listings in Arbor Presses.
Attrition Mills
10 Results
IPEC #7000, Attrition Mill/Air Swept Mill, Carbon Steel, 72" diameter x 76" H milling chamber, 4" diameter Screw feed, 40" x 16" side top discharge, 6-rows rotating disc w/3" width x 4" H x 3/8" thick hammers, 500 HP
Category: Attrition Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ipec
Model: 7000
IPEC 500 HP Attrition Mill / Air Swept Mill, with 72" diameter X 76" high milling chamber, Model 7000. Milling chamber is fed by 4" diameter screw feed, chamber includes 6-rows of high-speed rotating disc with 3" wide x 4" high x 3/8" thick hammers. Hammers are driven by vertically mounted 500 HP motor thru v-belt ...more
Machinery & Equipment Co has 9 more
listings in Attrition Mills.
Autoclaves
17 Results
6" x 14" Pelton & Crane #S Autoclave Sterilizer, Autoclave Sterilizer, (2) trays, 270 F, 110 V, 1250 width
Category: Autoclaves
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Pelton & Crane
Pelton & Crane Sentry Model S Autoclave Sterilizer, constructed of stainless steel contact parts. Chamber measures approximately 6" diameter X 14" deep. Include (2) trays, 1 hour timer and automatic shut off. Maximum temperature rated for 270 degrees Fahrenheit, Indicator lights show "Power On", "Heat On." Rated ...more
Machinery & Equipment Co has 16 more
listings in Autoclaves.
All Packaging Machinery #S5P-14, Semi-Automatic Bagger for wicketed bags, 6" - 12-1/2" width bags, 30 bags/min., 300 bags capacity, w/Blower, 110 V
Category: Bagging Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: All Packaging
Model: S5P-14
All Packaging Machinery semi-automatic bagger for wicketed bags. Unit is model S5P-14, designed for 6" to 12-1/2" wide bags, complete with blower to open bags. Unit operated on 110 volt, rated to hold up to 300 bags and capable of up to 30 BPM. Suitable for wicketed and saddle pack bags. Good condition., Basis: FOB.
Machinery & Equipment Co has 14 more
listings in Bagging Equipment.
Action Pac #B300/MC, Linear Bulk Filler/Scale, Blending/Mixing System, 3-Heads, 2000 lbs/hr., includes cleated belt conveyor, drum tumbler, discharge conveyor, 2014
Category: Bakery Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Action Pac
Model: B300/MC
Year: 2014
ActionPac Linear Bulk Filler / Scale, Blending / Mixing System, Model B300/MC. Approximate speed 2,000 pounds per hour; 3-heads. Has IDEC Microsmart Pentra PLC, touchscreen HMI. Includes cleated belt conveyor, drum tumbler and discharge conveyor. Serial number 4255; built in 2014. Last mixing/weighing packaged small ...more
Machinery & Equipment Co has 18 more
listings in Bakery Equipment.
1.5" Ladish, Ball Valve, Stainless Steel, 250 psi, Tri-clamp, Lot of (4 available) Valves
Category: Ball Valves
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ladish
Lot of (4) Ladish 1-1/2" diameter stainless-steel manual Ball Valves, Direct Mount, Tri-Clamp, 2-Way 3 Piece Non-Encapsulated, 250 PSI Maximum Pressure., Diameter: 1.5", Basis: Lot.
Machinery & Equipment Co has 1 more
listing in Ball Valves.
Ball, Pebble, Sag Mills, Chemical Processing
11 Results
30" x 54" Denver, ball mill, 10 HP, steel liners
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Denver
Denver 30" Diameter x 54" long Ball Mill with steel liners and ball charge. Incudes 16" x 12" infeed hopper at 57" feed height and 17" diameter overflow discharge. Mill is driven by 10 HP, 1175 RPM, 460 V, 3-phase, 60 Hz motor thryu v-belt assembly, including guard. Previously used in gold mining application., HP: 10 ...more
Machinery & Equipment Co has 10 more
listings in Ball, Pebble, Sag Mills, Chemical Processing.
Basket Filters
1 Result
4" Rosedale #4-12-3/4P, Stainless Steel Basket Filter, 4" diameter x 12" straight side, 3/4" NPT, 200 psi
Category: Basket Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Rosedale
Model: 4-12-3/4P
Rosedale mdl 4-12-3/4P 304 stainless steel basket filter with 3/4" NPT, measuring 4" diameter x 12" straight side rated for 200 PSI., Dimensions: 4" Diameter X 12" High, Materials of Construction: 304 Stainless Steel, Internal Pressure: 200 PSI, Basis: FOB, Inlet and Outlet: 3/4".
15.75" Siebtechnik, Pusher-Type Centrifuge, 2850 RPM bowl
Category: Basket Pusher Centrifuges
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Siebtechnik
Centrifuge, pusher-type, type 316 stainless steel contact parts, manufactured by Siebtechnik, type H-400, 400 mm (15.75") diameter bowl, rated for up to 2850 RPM, machine number 3854, complete with main drive. Previously used at chemical processing facility., Basis: FOB.
27" width x 24" D x 20" H Blue M POM-371A-2, Stainless Steel interior, electrically heated, 212°F
Category: Batch Type Furnaces
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Blue M
Blue M Oven Model POM-371A-2, Stainless steel interior, inside dimensions measure 27" wide X 20" high X 24" deep. Electrically heated, rated for 208/240 Volts, Single phase, 60 Hz. B.O.M. NO. E3-00041. Serial number P20-312., Manufacturer :, Capacity: 8.25 Cubic feet, Maximum Temperature: 212 degrees Fahrenheit (100 ...more
Depth #03E2-18-850, Battery Charger, 18 cell batteries, 208/240/460 VAC input, 36 VDC output
Category: Battery Chargers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Model: 03E2-18-850
Depth battery charger for 18 cell batteries. Unit has digital display, is Model 03E2-18-850, serial number AE65102., Basis: FOB.
Machinery & Equipment Co has 1 more
listing in Battery Chargers.
.38" wide x 8.2' long, Stainless Steel Belt Conveyor, 1/2 HP, 1600 RPM, 230 V.
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
(2) Stainless steel belt conveyor measuring 0.375" wide x 8'3" long incline. Unit last used for syringes, driven by 1/2 hp gearhead drive, 230 volt, 1600 RPM. On stainless steel frame., HP: 0.5, Type: Syringe Conveyor, Measurements: 0.375" Wide X 8'3" Long, Materials of Construction: Stainless Steel, Previous ...more
Machinery & Equipment Co has 98 more
listings in Belt Conveyors.
24" wide x 18' long, Belt Feeder, Carbon Steel, heavy duty rubber belt, 18" belt off ground, 3 HP, 1775 RPM, 208-230/460 V
Category: Belt Feeder Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Belt feeder, measures 24" wide X 18' long, frame is constructed of carbon steel and includes heavy duty rubber belt, riding on idlers. Belt is driven by 3 HP, 1775 RPM, 208-230/460 V motor thru V-belt drive assembly. Belt is 18" off ground. Previously used to convey compost discharged from ribbon mixer (Item# ...more
Belt Filters
4 Results
5.5' x 18' Komline Sanderson #0.5m X 2.25m, Horizontal Vacuum Belt Filter, Stainless Steel, 8' high, 12 HP, 480 V
Category: Belt Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Komline Sanderson
Komline Sanderson Horizontal Vacuum Belt Filter, ADPEC K-S type, model.5m X 2.25m, effective filtration area of 12.1 SF, ADPEC deck measures 5.5' wide X 18' long X 8' high. 3 phase, 480 V, 60 Hz, 12 HP. Complete with controls. Manuals and drawings are available. Last used in R&D project and in very ...more
Machinery & Equipment Co has 3 more
listings in Belt Filters.
18" width x 55" L Lincoln Impinger #1133, belt oven, Stainless Steel
Category: Belt Ovens
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Lincoln
Year: 1996
Lincoln Impinger belt oven, 18" wide x 55" long wire mesh belt conveyor, 28" long hot zone Model 1133-000-A, serial number 2022109, new in 1996, 3-phase, 60 cycle, 25 AMPS, stainless steel construction, mounted on stainless steel base with castors., Measurements: 18" wide x 55" long wire mesh belt conveyor with 28" ...more
Machinery & Equipment Co has 6 more
listings in Belt Ovens.
12 cu.ft., Bin, Stainless Steel, 24" x 20" opening, 40" straight side, 4-12" center bottom outlet
Category: Bins
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel bin, opening measures 24" X 20" with 40" straight side leading to pyramid bottom with 4-12" center bottom outlet. Fair condition., Cubic Feet: 12 CF, Basis: FOB.
Machinery & Equipment Co has 30 more
listings in Bins.
Bladder Presses (Wine & Cider)
5 Results
Bucher #140, Bladder Press, Stainless Steel, Control panel, 380V
Category: Bladder Presses (Wine & Cider)
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bucher
Model: 140
Bucher RPX bladder press, model # 140, all stainless steel contacts. Unit complete with control panel. Driven by 380V, 3/60Hz motor. Very good condition., Basis: FOB.
Machinery & Equipment Co has 4 more
listings in Bladder Presses (Wine & Cider).
Lyco, Blancher, Stainless Steel rotary screw blancher, 60" x 20', perforated cage, 5 HP, includes covers
Category: Blanchers
Seller: Machinery & Equipment Co
Location: Chowchilla, CA
Mfr: Lyco
Stainless Steel Rotary Screw Blancher, approximately 60" diameter x 20' long screw with perforated reel around screw. Includes covers and main drive. Stainless steel hopper feed to auger. Last used processing vegetables. Driven by 5 HP, 208-230/460 Volt, 1745 RPM, 3-phase, 60 Hz motor thru gearbox., Stock Number ...more
Machinery & Equipment Co has 5 more
listings in Blanchers.
CPC Pumps #HDR, heavy oil feed pump, Carbon Steel Alloy, 700 HP, unused, never installed
Category: Boiler Feedwater Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cpc Pumps
Model: HDR
Heavy Oil Feed Pump, manufactured by CPC Pumps, Model HDR, Size D14x18x27. Carbon steel alloy construction with A216 Gr WCB 12% CR casing material and A487 Gr CA6NM 12% CR impeller material. Rated for flow of 1086 m3/h (4780 gallon per minute), 103.6m (340 feet) head, 3755 MAWP Kpa, 85 degrees Celsius, 0.971 specific ...more
Boom Lifts
1 Result
500 lb. Genie #Z30/20N, Boom Lift, 36' work height, 21' 5" horizontal reach, 12' 8" up & over clearance, 618 hours
Category: Boom Lifts
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Genie
Model: Z-30/20N
Genie model Z-30/20-N boom lift. Unit has 618 hours of use, 500-pound capacity, 36' of working height, 21' 5" horizontal reach, 12' 8" up and over clearance. Needs new charger and batteries., Basis: FOB.
Altman Browning #URS 5000S, Bottle Decapitator, 36" rotary turntable, 8" x 21" vibratory outfeed conveyor w/2.5" perforated section, 120 V, 2003
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Altman Browning
Model: URS 5000S
Year: 2003
Altman Browning Bottle Decapitator, model URS 5000S, serial # 0346-003. Includes 36" rotary turntable with feed guides leading to bottle crusher with stainless steel jaws. Jaws lead to vibratory outfeed conveyor measuring 8" x 21" with 2-1/2" perforated section. Includes controls for feed table and outfeed conveyor. ...more
Machinery & Equipment Co has 46 more
listings in Bottling Equipment.
18" width x 14.5" H x 38" D The Furnace Source, Box Kiln/Furnace, 2100°C, 2006
Category: Box Type Furnaces
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: The Furnace Source
Year: 2006
The Furnace Source box kiln/furnace with 18" x 14-1/2" x 38" deep hot zone, rated for up to 2,100 degrees Celsius (3,812 degrees Fahrenheit). Set up for graphite heating elements. Fully operational and all accessories are included. Regularly maintained. Offered with manual and schematics. Furnace was new in 2006 and ...more
Machinery & Equipment Co has 2 more
listings in Box Type Furnaces.
Briquetters
8 Results
No. MS150 Komarek-Greaves (Bepex), briquetting press, 55 kW, 20" roll diameter 16 segments per roll
Category: Briquetters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Komarek-Greaves
Model: MS150
Komarek Greaves (Bepex) Model MS150 Briquetting Press, s a 20 roll diameter with 16 segments per roll. The rolls are currently set at 60cc, and includes a spare set of segments for larger briquettes, ideal for DRI (direct reduced iron) supply to EAF (electric arc furnace). Driven by 55Kw motor. Machine is reported to ...more
Machinery & Equipment Co has 7 more
listings in Briquetters.
Briquetting Machines For Powdered Material
1 Result
KR Komarek #B, briquetting press, 30 HP
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kr Komarek
Model: B
Briquetter compactor, manufactured by KR Komarek, model B300, 15" diameter x 2-7/8" wide rolls, pockets are 1/2" diameter, half sphere on one roll and smooth roll on second roll. currently less the 30 HP motor, equipped 7.5 HP horizontal feed auger, and 2.5 HP vertical feed auger. Serial number B-357., Basis: FOB.
All-Fill #Bucket-El, Z-frame Bucket Elevator, Stainless Steel, 4' horizontal infeed & 11' H vertical & 6' L horizontal discharge sections, 10' H discharge, 14" width buckets, 1/2 HP
Category: Bucket Elevator Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: All-Fill
Model: BUCKET EL
All Fill Z-Frame Bucket Elevator, Model BUCKET EL, stainless steel construction. Includes 4' horizontal infeed section, leading to 11' high vertical section, to 6' long horizontal discharge, 10' discharge height. Buckets are conveyed on chain assembly (less buckets), set up for 14" wide buckets. Driven ...more
Machinery & Equipment Co has 2 more
listings in Bucket Elevator Conveyors.
Bundler Machines - Shrink Bundlers
2 Results
Arpac #105-28, Shrink Bundler/Tunnel system, 25" wide x 11" tall seal bar, 27" width film, 14" tall x 28" width tunnel, 21" width belt
Category: Bundler Machines - Shrink Bundlers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Arpac
Model: 105-28
ARPAC LLC Shrink Bundler/Tunnel system, model number 105-28. Unit is rated for up to 30 TPM depending on application. Includes 25" wide X 11" tall seal bar opening capable of accommodating a 27" maximum film width. Wrapped product enters a 14" tall X 28" wide tunnel with 21" wide belt. Driven by 460V, 3/60Hz motor. ...more
Machinery & Equipment Co has 1 more
listing in Bundler Machines - Shrink Bundlers.
1.29 MM BTU Eclipse #RM100, Burner, 1500 F alloy & 1800 F SiC tubes, natural gas fired
Category: Burners & Combustion Systems
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Eclipse
Model: RM100
Eclipse Model RM100 RatioMatic Burner, rated for 1.295MM BTU's per hour, rated for up to 1,500 degrees Fahrenheit (alloy tube) and 1,800 degrees Fahrenheit (SiC tube), fired by natural gas, propane or butane. Previously used as part of pasteurization skid., Basis: FOB, Rated: 1.295MM BTU's per hour.
Machinery & Equipment Co has 3 more
listings in Burners & Combustion Systems.
6" Quatrol #Type 6, Butterfly Valve, w/handwheel, 200 lb. WOG
Category: Butterfly Valves
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Quatrol
(3) Valve, butterfly, Quatrol "Ribless Wafer" Type, 6" diameter bronze disc, with iron body. Includes gearbox with handwheel, 200 pounds wog. Units are still in boxes, never used., Diameter: 6", Basis: Each, FOB.
Machinery & Equipment Co has 4 more
listings in Butterfly Valves.
12" width x 12" H x 10" D Quincy #10GC, lab oven, 600 watt, 5.2 amp, 115 V.
Category: Cabinet Type Ovens
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Quincy
Model: 10GC
Quincy lab oven, model 10 GC, serial number 008885, 600 watt, 5.2 amp, 115 V, 60 Hz, 12" wide X 12" high X 10" deep., Basis: FOB.
Machinery & Equipment Co has 8 more
listings in Cabinet Type Ovens.
Cannabis Processing Machinery
2 Results
Guoxin #GX-12-4, hemp dryer, 69 square meters drying area, 0-120°C
Category: Cannabis Processing Machinery
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Guoxin
Model: GX-12-4
Guoxin Hemp Dryer; Model GX-12-4; Drying Area 69 square meters; Spread thickness of material 50-200 mm; Working temperature 0-120 degrees C; Drying Time 0.5-5 hours; 22 kW Induced Draft fan; 2.2 kW Exhaust fan; 3 kW Feeding Conveyor; 0.55 kW Discharge Conveyor; 27.75 kW total power; Dimensions: 23m x 5.5m x 2.8m. ...more
Machinery & Equipment Co has 1 more
listing in Cannabis Processing Machinery.
American Beer Equipment #LinCan-30, can filling line, 304 Stainless Steel, 30 cans/minute, lid seaming
Category: Canning Fillers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: American
Model: LINCAN-30
Canning Line, manufactured by American Beer Equipment, Model LinCan 30, rated for 30 cans per minute. 304 stainless steel construction, inline design with (7) filling nozzles, lid seaming, PLC touchscreen controls. Unit can be modified to run higher CPM capacity. Last used running 12-ounce and 16-ounce cans of beer. ...more
Machinery & Equipment Co has 7 more
listings in Canning Fillers.
California, Bowl Feeding Capacity Sorter, 42" diameter x 24" deep, 120V, 45 RPM
Category: Cap Sorters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: California
California Vibratory Feeders Inc bowl feeding cap sorter. Unit is 42" diameter x 24" deep, is epoxy lined with carbon steel frame. Rated for 120 Volts, 60 cycle, 45 rpm., Basis: FOB, Bowl Diameter: 42" Diameter x 24" Deep.
Machinery & Equipment Co has 3 more
listings in Cap Sorters.
Carton Packaging Machines
5 Results
Adco #12WA-175-SS, cartoner/automatic wraparound carton sleever, all Stainless Steel construction, 2010
Category: Carton Packaging Machines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Adco
Model: 12WA-175-SS
Year: 2010
Adco Cartoner/Automatic wraparound carton sleever, Cartoner model# 12WA-175-SS, serial# 5162, new in 2010. All stainless steel construction. Includes corrugated feed conveyor measuring 24" wide with (3) plastic chain belt conveyors on 4" spacing, rotary picker with (3) rotary arms including (3) suction cups on each ...more
Machinery & Equipment Co has 4 more
listings in Carton Packaging Machines.
Best Packs #1AS-50, case taper, bottom only, 1998
Category: Carton Sealer
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Best
Model: 1AS-50
Year: 1998
Box taper, Best Pack, Model 1AS-50, 110Volt, bottom only case taper, new 1998, serial number 981376., Basis: FOB.
Machinery & Equipment Co has 7 more
listings in Carton Sealer.
Cartridge and Bag Filters
37 Results
Alsop Engineering, Stainless Steel Filter Housing, 4" diameter x 10" straight side, 1/4" pipe fittings
Category: Cartridge and Bag Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Alsop Engineering
Alsop Engineering 316 stainless steel filter housing measuring 4" diameter x 10" straight side with 1/4" pipe fittings., Dimensions: 4" Diameter X 10" High, Materials of Construction: 316 Stainless Steel, Basis: FOB, Inlet and Outlet: 1/4" Diameter.
Machinery & Equipment Co has 36 more
listings in Cartridge and Bag Filters.
Automation Robotics #Robopack-2000, Case Packer/Erector, 3 lanes, 15 CPM, 80 psi air, 120 V, 2002
Category: Case Erectors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Automation Robotics
Model: ROBOPACK-2000
Year: 2002
Automation Robotics case packer/erector, fully integrated, Model Robopack-2000. Yogurt cups conveyed single lane to the machine. An automatic lane collator divides them into 3 lanes. One of the four robotic arms with suction cups pick up the 12 cups and rotate them. An automatic case erector erects a case. Robotic arm ...more
Machinery & Equipment Co has 4 more
listings in Case Erectors.
Delkor #SP-LH-FL, Case Packer/Tray Loader, (12) containers in 4 x 3 pattern corrugated pad, 16" x 13" pads spacing, 1 HP
Category: Case Packer Machines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Delkor
Model: SP-LH-FL
Case packer/tray loader, manufactured by Delkor, "Spot-Pak," model number SP-LH-FL, set up to place (12) containers onto corrugated pad in 4x3 pattern, loading arm includes suction cups and is pneumatically operated. Includes corrugated pad feed chute, leading to chain belt conveyor, with 16" x 13" spacing for pads. ...more
Machinery & Equipment Co has 11 more
listings in Case Packer Machines.
Cassette Filters
2 Results
Millipore, Cassette Filter, (2) 8-3/8" & 7" Ports Cassettes, 3/8" inlet/outlets
Category: Cassette Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Millipore
Millipore Cassette Filter Stainless Steel frame (2) cassette size 8-3/8" & 7" ports, 3/8" inlets & outlets., Basis: FOB, Inlet and Outlet: 3/8" inlets & outlets.
Machinery & Equipment Co has 1 more
listing in Cassette Filters.
Centrifugal Air Compressors
1 Result
1727 cfm, 14 psi, FS Elliott #150DA3, Air Compressor, 3-Stage, 417 cfm @ 60 psi outlet, 350 HP, 3600 RPM, 2300 V, qty. 2, 1983
Category: Centrifugal Air Compressors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fs Elliott
Model: 150DA3
Year: 1983
(2) Elliott air compressor, Pap-plus, model 150DA3, 3 stage centrifugal, driven by 350 HP, 3600 RPM, 2300 volt. Compressor is complete unitized on skid with electrical control panel, main motor direct coupled, twin inter-coolers, vibration monitors and controls. Inlet @ 1727 CFM @ 14.5 PSI @ 83 deg. F., outlet @ 417 ...more
15 GPM, Goulds, 304 Stainless Steel vertical centrifugal pump, 1/2 HP, 1" in/out, 230 psi
Category: Centrifugal Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Goulds
Goulds 304 stainless steel vertical centrifugal pump, G&L series SSV multistage unit, max 230 psi, 15 gpm. Unit has 1" NPT inlet/outlet, 1/2 Hp, 230/460V, 3450 RPM., HP: 0.5, Basis: FOB, Inlet and Outlet: 1" Inlet x 1" Outlet, Contact Parts: 304 Stainless Steel.
Machinery & Equipment Co has 153 more
listings in Centrifugal Pumps.
4" x 18" Sharples #AS-14, Clarifier Centrifuge, 1700 RPM bowl, 2 HP, 3400 RPM, 440 V
Category: Centrifuges
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: AS-14
Sharples centrifuge, clarifier, Model AS-14, M340A-52A-81F, bronze/steel contact, 4" x 18" bowl, 1700 RPM, 2 HP, 440Volt, 3400 RPM drive. Serial number 455A2240, last used on diesel oil., Basis: FOB.
Machinery & Equipment Co has 57 more
listings in Centrifuges.
2" wide x 6.42' long, Stainless Steel Chain Belt Bag Carrier Type Conveyor (3 available)
Category: Chain Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
(3) Stainless Steel Chainbelt Bag Carrier-type conveyor, 2" X 77 long belt. Mounted on legs with footpads. Previously used in food operation. Good condition., Type: Incline Conveyor, Measurements: 2" Wide X 77" Long, Materials of Construction: Stainless Steel, Previous Use: Food Processing, Basis: Each, FOB.
Machinery & Equipment Co has 3 more
listings in Chain Conveyors.
Chain Hoists, Monorail and Trolley Cranes
2 Results
.5 Ton, Dayton Crane & Dayton #4Z811B, All-steel Telescoping Hoist & Chain Hoist, .5 ton & 500 lbs. capacity, 8 FPM, 10' Lift, 1/6 HP, 115 V.
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Dayton
Model: 4Z811B
Yale Crane all-steel telescoping hoist, rated for 1/2 ton FWA capacity. Complete with Dayton Electric Chain Hoist, Model 4Z811B, 500-pound capacity, FPM:8, Lift: 10 feet, Electricals: 1/6 HP, 115 volts, single phase, 60 Hz, 3 AMPS, Maximum Duty: 10 Min. per hour., Basis: FOB.
Machinery & Equipment Co has 1 more
listing in Chain Hoists, Monorail and Trolley Cranes.
Honeywell #TVEZ-6-0-G-B00-CU0000-0, Paperless Chart Recorder, 5" diagonal Screen, 3 of 6 pens, 3.5" media/144 mb storage, qty. 2
Category: Chart Recorders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Honeywell
Model: TVEZ-6-0-G-B00-CU0000-0
(2) Honeywell eZTrend QXE paperless chart recorder, model TVEZ-6-0-G-B00-CU0000-00, 5" diagonal screen size, 3 of 6 pens, media 3.5" or 144 mb storage, serial number 054Y5670925000002 and 054y5670925000001., Basis: Each, FOB.
Machinery & Equipment Co has 1 more
listing in Chart Recorders.
Chemical and Processing Equipment - Miscellaneous
16 Results
A & B Process Systems, 2-Tank CIP Skid, 57" width x 116" L, (2) 250 gallon Stainless Steel Tank, 15 psi/FV @ 350°F, 20 HP pump, 230/460 V., 2003
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: A & B Process Systems
Year: 2003
A&B Process Systems 2-Tank CIP Skid with (2) 250-Gallon 316L Stainless Steel Tanks with insulated vessels rated for 15 PSI / Full Vacuum at 350 degrees Fahrenheit to minus 20 degrees Fahrenheit Minimum Design Metal Temperature (MDMT). Skid mounted system with 57" wide x 116" long. Includes 20 HP centrifugal pump ...more
Machinery & Equipment Co has 15 more
listings in Chemical and Processing Equipment - Miscellaneous.
2.5 Ton, Edwards #CC-3, Water Chiller, R-22, 400/250 psi, 24 gallon tank, 220 V., 1976 (2 available)
Category: Chillers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Edwards
Model: CC-3
Year: 1976
(2) Edwards Eingineering water chiller, water cooled, 2-1/2 ton cap, refrigerant R-22, 8-1/2#, model CC-3, 220V, 3-phase, 60Hz high side 400 PSI, low side 250 PSI, 24 gal cap tank, new 1976, portable on wheels., Tonnage: 2.5, Basis: Each, FOB, Refrigerant: R-22, Pressure: 400 PSI (high side) and 250 PSI (low side).
Machinery & Equipment Co has 20 more
listings in Chillers.
Chocolate Candy Enrober
2 Results
Perfect Choco #ENRO-6, Chocolate Enrober, 6" width x 79" L Stainless Steel wire mesh belt conveyor, 120 V, 15 Amps, full chocolate bottom enrobing/bottom & sides up to 0.5"
Category: Chocolate Candy Enrober
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Perfect Choco
Model: ENRO-6
Perfect Choco 6" chocolate enrober, Model ENRO-6. Full chocolate coating bottom enrobing or bottom and sides up to 0.5". Unit has a 6" W x 79" L stainless steel wire mesh belt conveyor. Electrical: 120V / 15 AMPS. Unit missing the mini wheel, heating cabinet and (1) motor circuit board does not work. Made in Canada. ...more
Machinery & Equipment Co has 1 more
listing in Chocolate Candy Enrober.
Chocolate Candy Melter
1 Result
Scott Turbon, Chocolate Melter w/ Stainless Steel jacketed Tank, 50 gallon tank, 24" diameter x 31" straight side, 1.5" center bottom outlet, 3/4 HP, 3450 RPM, 208-230/460 V
Category: Chocolate Candy Melter
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Scott Turbon
Chocolate melter including Stainless steel jacketed 50 gallon tank, manufactured by Scott Turbon Mixer, tank measures 24" diameter X 31" straight side plus dish bottom, 1-1/2" center bottom outlet, open top. Mounted on stainless steel stand with grate standing area. Complete with electrically heated heat exchanger for ...more
Vaughan #HF4R8CS, Chopper Pump, 450 gpm @ 27' tdh, 4" outlet, 1170 RPM, 25 HP, 2011
Category: Chopper Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Vaughan
Model: HF4R8CS
Year: 2011
Vaughan model number HF4R8CS chopper pump, originally supplied with 15 HP motor and increased to 25 HP (both motors included), 4" diameter outlet, rated for up to 450 GPM, 27' TDH, 1170 RPM, serial number 108770. Motors - 230/460V, 1180 RPM, 3/60Hz. Good condition. New in 2011., HP: 25, Basis: FOB.
Machinery & Equipment Co has 1 more
listing in Chopper Pumps.
Chromatography Columns
1 Result
Amicon #P1000x500mm, Cast Acrylic Chromatography Column, 1000 mm diameter x 500 mm H
Category: Chromatography Columns
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Amicon
Model: P1000X500MM
Amicon Moduline Cast Acrylic Chromatography Column, P1000x500mm, chromatography column designed for precise and efficient separation of biomolecules and other compounds. Measures 1000mm diameter X 500mm high, Constructed of cast acrylic material. Mounted on stainless steel frame with casters., Measurements: 1000mm X ...more
Classifiers for Processing & Mining Equipment
5 Results
Donaldson separator, air classifier, 12", sub-micron
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Donaldson
Laboratory size mechanical air separator, Majac-Donaldson model A12 Acucut, 12" diameter with 1 HP vari-speed rotor drive (500 to 5500 rpm). Designed for very fine particle separation cuts involving material in the 1/2 to 35 micron range. Includes feeder, powder recovery system, 7.5 HP (90 CFM @ 10" hg) primary air ...more
Machinery & Equipment Co has 4 more
listings in Classifiers for Processing & Mining Equipment.
Clean In/Out Place Systems (CIP/COP) for Food
4 Results
Akimoto, Rice Washer, Stainless Steel, for 50 lb. bags of rice, 17-1/2" diameter x 12" straight side wash tank, 45 deg. Cone bottom, 1-1/2" diameter Side Discharge, 2" dia overflow
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Akimoto
Rice washer for 50-pound bags of rice, includes stainless steel wash tank, measuring 17-1/2" diameter X 12" straight side plus 45 degree cone bottom. Rice is manually dumped into wash tank and water is added from bottom of tank through piping to nozzle spray assembly to wash rice. Once rice is washed, there is a ...more
Machinery & Equipment Co has 3 more
listings in Clean In/Out Place Systems (CIP/COP) for Food.
24" Freund-Vector #Hi-Coater, Coating Pan, 24" diameter x 16" deep, 3.5" diameter Inlet, 3" outlet, 5 HP, 3470 RPM, 230/460 V.
Category: Coating Pans
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Freund-Vector
Model: HI-COATER
Coating pan, manufactured by Freund-Vector, Model Hi-Coater. Unit includes blower and control panel. Includes 316 stainless steel coating pane, measures 24" diameter X 16" deep; chamber has internal baffles. Complete with New York Blower shop number C-5206-110 size 210 4A05. Blower driven by 5 HP, 230/460, 3-phase, 60 ...more
Machinery & Equipment Co has 9 more
listings in Coating Pans.
Colloid Mills
6 Results
Gifford Wood #Micro-81, colloid mill, Stainless Steel, jacketed, 15 psi, 8" diameter X 7" deep tapering to 1" milling hole
Category: Colloid Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Gifford
Model: MICRO-81
Stainless steel jacketed colloid mill, manufactured by Gifford-Wood, model Micro Mill 81, 316 stainless steel contacts. Milling chamber measures 8" diameter X 7" deep tapering to 1" milling hole. Chamber is jacketed and rated for 15 PSI internal. Includes variable speed control. Mounted on stainless steel frame with ...more
Machinery & Equipment Co has 5 more
listings in Colloid Mills.
Satake #810IE, Color Sorter, 8-lane
Category: Color Sorters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Satake
Model: 810IE
Satake Scan Master II 810IE color sorter, previously used sorting seeds, includes 8 sorting lanes. Capable of an 8 lane sort which is increased volume and the RGB lights can be tuned to various reject samples. Good condition., Basis: FOB.
Machinery & Equipment Co has 1 more
listing in Color Sorters.
Columns
12 Results
3" x 3' Chemineer, Sieve Tray Column, (5) trays on 6" spacing, 1/2 HP, Stainless Steel plates
Category: Columns
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Chemineer
Chemineer Sieve tray column, 3" x 3', 5 trays on 6" spacing, stainless steel agitator, 1/2 Hp Reeves vari-speed motor drive, glass-lined construction, stainless steel plates, last used on vegetable oil. Serial number 3-495., Diameter: 3" X 3', Basis: FOB.
Machinery & Equipment Co has 11 more
listings in Columns.
Commercial Printing Presses and Equipment
17 Results
Foxjet, Box Printer
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Foxjet
Year: 2009
Foxjet box printer, Basis: FOB.
Machinery & Equipment Co has 16 more
listings in Commercial Printing Presses and Equipment.
Complete Manufacturing & Power Plants
5 Results
Azfab, complete sand wash plant, screens, attrition scrubbers, hydrocyclones, 60-100 TPH, 2020
Category: Complete Manufacturing & Power Plants
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: AZFAB
Year: 2020
Sand wash plant, AZFAB and Metso components, begins with the AZFAB High-Speed Dual Shaft Durability Attrition Cell (twin 75 Hp motors, 225 TPH), which scrubs the raw sand. The sand is then dewatered using the AZFAB 4'x10' Dewatering Screen (100 TPH) and the AZFAB 3'x8' Dewatering Screen (60-70 TPH) ...more
Machinery & Equipment Co has 4 more
listings in Complete Manufacturing & Power Plants.
ATS #1105C, Compression Tester, 5000 lbs. capacity, 42" crosshead travel, 20" nominal horizontal clearance, 115 V
Category: Compression Testers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ats
Model: 1105C
ATS model 1105C Universal Testing Machines compression tester, capacity rated for up to 5,000 pounds. Twin-screw drive, performing tension, compression, shear, and flexure tests. Serial number 9024397-10-90, crosshead travel 42", nominal horizontal clearance 20", Digital Display, 115 Volts, single phase, 60 Hz. ...more
84" Symons #Shorthead, Shorthead Heav Duty Cone Crusher, Carbon Steel, 400 HP, 460 V
Category: Cone Crushers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Symons
Model: SHORTHEAD
Cone crusher, Symons Nordberg, 7' shorthead, heavy duty, driven by 400 HP, 460 volt, 3-phase, 60 Hz motor. Includes lube sets, hydraulic couplings, unused housings, unused oil tank heater, unused filters. Spare parts available., HP: 400, Diameter: 7', Materials of Construction: Carbon Steel, Basis: As Is ...more
Machinery & Equipment Co has 2 more
listings in Cone Crushers.
Cone Mixers and Blenders
12 Results
1 cu.ft. Patterson, Conical Mixer, Stainless Steel, 1HP, 3/60/230/460V, 1725 RPM
Category: Cone Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Patterson
Mixer, conical, 1 cubic foot, stainless steel, Patterson-Kelley. Comes a 1 HP, 3/60/230/460V, 1725 RPM motor. Less cover., HP: 1, Cubic Feet: 1, Materials of Construction: Stainless Steel, Basis: FOB.
Machinery & Equipment Co has 11 more
listings in Cone Mixers and Blenders.
2" W.A. Kates Co. #KB11B-A, Flow Rate Control Valve, Stainless Steel, 275 psig @ 100°F, 2" Inlet/outlet
Category: Control Valves
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: W.A. Kates Co.
Model: KB11B-A
W.A. Kates Co. Flow Rate Control Valve, Model KB11B-A, Serial number 51307. Body: stainless steel. Trim: stainless steel. Maximum internal W. P: 275 PSIG at 100 degrees Fahrenheit. Different pressure regulating band 150 PSI, 2" Inlet/outlet., Basis: FOB.
Machinery & Equipment Co has 2 more
listings in Control Valves.
Conveyor and Pass Through Parts Washer
6 Results
Inline Packaging Systems #RSC-Rinser, inline rinser & indexing conveyor, 10 nozzles
Category: Conveyor and Pass Through Parts Washer
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Inline Packaging Systems
Model: RSC RINSER
RSC Inline Rinser and Indexing Conveyor, using ionized air to clean bottles. Includes Air Cleaner for bottles with 10-Nozzles, and 4.5" wide X 108" long stainless steel belt conveyor, with guard rails. Previously run at 40 bottles/minute. As bottles are fed into the system, they are counted and securely held in place ...more
Machinery & Equipment Co has 5 more
listings in Conveyor and Pass Through Parts Washer.
36" width x 120" L Maxon #400, belt furnace, natural gas burner, Stainless Steel, 1/2 HP, 140°F, 2002
Category: Conveyor Belt Furnaces
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Maxon
Year: 2002
Belt furnace, measuring 36" wide x 10' long with Maxon model 400 oven-pack natural gas burner size 405. Unit includes EASI stainless steel heat-resistance flat mesh conveyor belt 36" wide x 12' long, gear motor 1/2 HP, 90 volts, 1750 rpm, blower is 10 HP 208/230/460 V, 1765 RPM 60 hz/3ph, opening size 40" x ...more
Conveyors Vibratory Feeders
18 Results
6" wide x 2' long, Syntron #BF-01C, Vibratory Pan Feeder, 2" deep pan, 115 V
Category: Conveyors Vibratory Feeders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Syntron
Model: BF-01C
Syntron vibratory pan feeder, 6" wide X 24" long X approximately 2" deep. Unit has stainless steel contact parts on vibratory pan and is complete with carbon steel lower frame. Unit is model number BF-01C, driven by 115 volt DC 60Hz 23 amp drive, offered less electrical controller. Manufactured new 10/94, Serial ...more
Machinery & Equipment Co has 17 more
listings in Conveyors Vibratory Feeders.
Cooker #TS-236-T6, Braising Pan, Stainless Steel, 24" width x 30" x 6.5" deep, 208 V, tilt controlled by hand wheel
Category: Cooking Systems
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cooker
Model: TS-236-T6
Cooker, braising pan, stainless steel, measuring 24" wide x 30" x 6-1/2" deep. Unit is a Model TS-236-T6. Complete with hinged lid and (2) slightly raised portions on lid, control for temperature, 3-phase, 208 Volt motor. Tilt controlled by hand wheel and has a pouring lip. Serial number 721282., Measurements: 24" ...more
Machinery & Equipment Co has 11 more
listings in Cooking Systems.
40 Ton, Evapco #LST 363, Cooling Tower, galvanized steel, 4" diameter Inlet/outlet, 2" drain, 2" overflow, 5 HP, 1750 RPM, 208-230/460 V, 1 Cell
Category: Cooling Towers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Evapco
Model: LST 363
Evapco cooling tower, Model LST 363, 4" diameter water inlet/outlet, 2" drain, 2" overflow. Includes twin fans, driven by 5 HP, 1750 RPM, 208-230/460V, 3/60Hz motor. Cooling tower is galvanized steel. Serial number 851819., Tonnage: 40 (Estimate), Materials of Construction: Galvanized Steel, Basis: FOB, Number of ...more
Machinery & Equipment Co has 7 more
listings in Cooling Towers.
Coupon Inserting Feeders for Food
2 Results
Kalish #8311, Desiccant Inserter, Stainless Steel, 17" diameter Bowl feeder, set for 3/8" diameter x 11/16" L dessicants, 1998
Category: Coupon Inserting Feeders for Food
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kalish
Model: 8311
Year: 1998
Desiccant Inserter, manufactured by Kalish, Model 8311. Unit includes top-mounted 17" diameter Bowl Feeder leading to stainless Pipe Feed. Currently set for 3/8" diameter X 11/16" long desiccants. Driven by 120V, 1/60 Hz motor, Serial number 0006. All stainless steel, pharmaceutical grade construction. New in 1998 and ...more
Machinery & Equipment Co has 1 more
listing in Coupon Inserting Feeders for Food.
10" x 14.5" Two-Roll Crusher, 24" x 16" top infeed hopper @ 57" H feed, 6" x 16" discharge @ 14" H clearance, 3 HP, 1760 RPM, 440 V, manual tension adjustment,
Category: Crushers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Two-Roll Crusher, includes 14.5" diameter X 10" face mild steel rolls with manual tension adjustment on rolls. Complete with top infeed hopper measuring 24" x 16" at 57" feed height. Product discharges through 6" x 16" opening at 14" high clearance. Rolls are driven by 3 HP, 1760 RPM, 440V, 3/60 Hz motor through gear ...more
Machinery & Equipment Co has 5 more
listings in Crushers.
Crushing Plants and Impact Crushers
1 Result
Williams #K, Type 680, 80" x 60" Reversible Impact Crusher, 27" x 80" feed opening, 1000 tons/hr., swing type sledge hammers, 1000 HP, 712 RPM, 4000 V
Category: Crushing Plants and Impact Crushers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Williams
Model: K, TYPE 680
Williams reversible impact crusher, 60" diameter x 80" long rotor, swing type sledge hammers. Williams Model K, Type 680. Previously had 1,000 HP, 4000 volt, 712 RPM, 3-phase, 60 Hz AC motor. Feed opening 27" x 80", rated at 1000 tons per hour on limestone, last used as secondary crusher. Unit is hydraulic opening ...more
Crystallizers
3 Results
Alloy Crystallizer, 2000 gallon, 6' x 8', agit, coil (4 available)
Category: Crystallizers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Alloy
(2) Crystallizer systems, designed for crystallization of tartaric acid, batch-type, 2,000 gallons per 4-6 hours. Complete with crystallizer body constructed of sanicro 28 alloy, rated for full vacuum internal, measures 6' diameter X 8' straight side, dished top & bottom, (2) sets of internal coils, center ...more
Machinery & Equipment Co has 2 more
listings in Crystallizers.
Larson, Vertical Spin Trimmer, 60 containers/min. depending on size, 24" heated blade technology for any type of resin bottles, 3/4 HP, 208/330/460 V
Category: Cutters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Larson vertical spin trimmer 24" heated blade technology to trim virtually any type of resin bottles and container. PVC; PP; PE with 3/4 Hp, 208/330/460 volt motor, can do 60 containers per minute depending on size., Basis: FOB.
Deaerators
1 Result
Fryma #LVE/B, Deaerator, Stainless Steel, 8" diameter Rotary disc w/screen, 1" feed, 1/2" vacuum port, 1/2 HP, 3400 RPM, 220/380 V
Category: Deaerators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fryma
Model: LVE/B
Fryma deaerator model LVE/B stainless steel construction, 8" dia rotary disc with screen, 1" feed and 1/2" vacuum port. Unit has 1/2 hp, 220/380 volt, 3400 rpm drive, serial number 412., Basis: FOB.
3" x 12" Sharples #T-1-P, Decanter Centrifuge, 50000 RPM bowl, 1 liter/min. feed w/300 gram bowl capacity, 15 psi
Category: Decanter Centrifuges
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Sharples
Model: T-1-P
Sharples decanter centrifuge, model T-1-P, serial number 63-T1P-478, with 3" diameter x 12" stainless vertical bowl with rated bowl speed of 50,000 RPM for 60,000 G's force rating. Centrifuge is vapor tight design with stainless steel contacts, set up in separator mode, rated at up to 1 liter per minute feed with ...more
Machinery & Equipment Co has 25 more
listings in Decanter Centrifuges.
Desiccant Compressed Air Dryers
3 Results
60 cfm, Oriad #25EA-4, Compressed Air Dryer, desiccant style, 90 psi, 16 hr. drying cycle controls
Category: Desiccant Compressed Air Dryers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Model: 25EA-4
Oriad compressed air dryer, dessicant style. unit is model 25EA-4 rated for up to 60 CFM @ 90 PSI Unit has controls for 16 hour drying cycle. National board# 5593, serial number 14755-8, complete with electric controls., Basis: FOB.
Machinery & Equipment Co has 2 more
listings in Desiccant Compressed Air Dryers.
Dewatering Press
4 Results
Komline Sanderson #GMD-2/0, belt filter pres, 2 meter, 2 HP, DC main, 1 HP, DC feeder
Category: Dewatering Press
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Komline Sanderson
Model: GMD-2/0
Komline Sanderson Unimat belt filter press, model GMD-2/0. This unit is a complete, 2 meter wide, stainless steel product contact part belt press. Unit s pneumatically controlled belt tracking device. Press s 1 HP, DC feeder belt drive and 2 HP, DC main press belt drive for vari-speed control. Unit is complete with ...more
Machinery & Equipment Co has 3 more
listings in Dewatering Press.
Dewatering Screw Presses
10 Results
Beloit Jones #P-100, Press Master Screw Press, w/Vibratory Shaker Discharge
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Beloit Jones
Model: P-100
(3) Beloit Jones Model P-100 Pressmaster screw press, Type 2510. Press complete with vibratory shaker discharge. Unit is type 316 stainless steel contact parts. Press is complete with drive, cone, screw, screen, etc. Serial numbers P320R, P510R & P321R. Previously used with Kelp., Materials of Construction: 316 ...more
Machinery & Equipment Co has 9 more
listings in Dewatering Screw Presses.
.5" ITT #1/2-A0D-PTTP, Double Diaphragm Pump, PPL, 10 GPM, 1/4" air inlet, 3 manifold, 3/32" solids
Category: Diaphragm Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Itt
Model: 1/2 A0D PTTP
Itt polypropylene double diaphragm pump with 1/2" inlet and 1/2" outlet, unit is model 1/2 A0D PTTP with flow rate of 10 gpm, max flow of 13 gpm with max operating press of 100 PSI. Unit has 1/4" air inlet and 3 manifold conncetions, max dia of solids is 3/32"., Basis: FOB.
Machinery & Equipment Co has 26 more
listings in Diaphragm Pumps.
26 KW Kohler #20R0ZJB, Generator, diesel fired, 1800 RPM, 33 kVA, 120/240 V, 3 phase, 2003
Category: Diesel Generators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kohler
Model: 20R0ZJB
Year: 2003
Kohler Power Systems generator, Model 20R0ZJB, 26 kW, 33 KVA, 240 Volt, diesel fired, 60 Hz, 1800 RPM, 3-phase, 120/240V. Unit is self contained. Has auto battery charger, mounted on skid, manufactured in January 2003, serial number 0751613. Unit has transfer switch, Model KCT-HCVA-01045., KW: 26, Basis: FOB.
Machinery & Equipment Co has 2 more
listings in Diesel Generators.
30 KW Chromalox, Circulation Heater, 7" diameter x 42" L Vessel, 2" inlet/outlet, 240 V
Category: Direct Fired Heaters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Chromalox
Chromalox Circulation Heater, includes electrically heated elements installed inside vessel. Vessel measures 7" diameter X 42" long with 2" inlet/outlet. Unit run on 240 volts, 2-3-phase, 3/60 Hz power. Rated for 30 kW heating capacity. Heating element catalog #TMTS-6301512. Previously used in food operation. Catalog ...more
Machinery & Equipment Co has 2 more
listings in Direct Fired Heaters.
Alfa-Laval #MAB206-7.5, centrifuge, disc, batch, solid wall
Category: Disc Batch Centrifuges
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Alfa-Laval
Model: MAB206-7.5
Alfa Laval separator, centrifuge, solid wall disc machine, model MAB 206S-24, stainless steel. The unit is a 7.5 HP motor drive, is set up as a three-way separator. Previously used for glycerine separation of soy bean oil at 14 GPM. It is unitized on base. Cleaned and painted., Basis: FOB.
Disc Filters
2 Results
Beloit Disc Filter, 48" Disc outside dimension x 4' L, Var. Speed Drive
Category: Disc Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Beloit stainless steel disc filter, measures 4' diameter X 4' long, last used as water treatment disc filter. Filter includes a variable speed drive and Nash vacuum pump., Materials of Construction: Stainless Steel, Basis: As-Is, Where-Is.
Machinery & Equipment Co has 1 more
listing in Disc Filters.
Delaval #SFDX-209-34S-60, Nozzle Ejecting Centrifuge, 1700-1800 RPM shaft, 850-900 RPM tachometer, 85-90 RPM speed counter, 25 HP, 440 V
Category: Disc-Nozzle-Centrifuges
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Delaval
Model: SFDX-209-34S-60
DeLaval nozzle ejecting centrifuge, model SFDX-209-34S-60, centrifugal separator, stainless steel contact parts, serial# 2857215 the unit is 25 HP (18. 5 kW), 440 volt, 60Hz directly connected clutch motor drive. 1700-1800 RPM on worm wheel shaft, 850-900 RPM on tachometer, 85-90 RPM on speed counter., Basis: FOB.
Machinery & Equipment Co has 3 more
listings in Disc-Nozzle-Centrifuges.
Disintegrators (Including Tap Disintegrators)
2 Results
Rietz #RD-9, Disintegrator Mill, 10" x 7" feed chute, 8" diameter x 8" tall milling section, 10 HP, 220 V.
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Rietz
Model: RD-9
Rietz disintegrator mill, model # RD-9. Unit includes 10" X 7" feed chute leading to 8" diameter X 8" tall milling section. Unit driven by 10 HP, 220V, 3/60Hz Sterling electric motor. Mounted on mild steel frame. Previously used in food operation., HP: 10, Diameter: 9", Type: Vertical Disintegrator Mill, Materials of ...more
Machinery & Equipment Co has 1 more
listing in Disintegrators (Including Tap Disintegrators).
Dispersion Mixers and Blenders for Food
7 Results
Big H, twin dispersion mixer, 75 HP, complete with floor pedestal mount, manual speed Control
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Big H
Twin dispersion mixer, manufactured by Big H, 75 HP motor, 440 Volt, 3-phase, 60 Hz, 900/1800 RPM. Unit is complete with floor pedestal mount with air over hydraulic lift, includes two 3" diameter x 47" and 52" stainless steel shaft, 48" stroke and two 12" & one 10" dispersion blades, heavy duty industrial ...more
Machinery & Equipment Co has 6 more
listings in Dispersion Mixers and Blenders for Food.
Dispersion Mixers-Blenders for Chemicals
18 Results
4.4 gallon Air Driven Dispersion Mixer, 24" L Stainless Steel shaft, 10" diameter x 5" straight top section Tank, 3" diameter Propeller, 8" L taper section, qty. 2
Seller: Machinery & Equipment Co
Location: Brisbane, CA
(2) Air driven dispersion mixer, with 4.4 gallon stainless steel covered mix tank, agitated by pneumatic motor, with 3" diameter propeller on a 24" long stainless steel shaft. (3) legs. Flat clamped top, dished bottom. Tank has 10" diameter x 5" straight top section, 8" long taper section, to 6" diameter x 8" straight ...more
Machinery & Equipment Co has 17 more
listings in Dispersion Mixers-Blenders for Chemicals.
6" Diverter Valve, Sanitary 3-way valves, Stainless Steel, One unit has actuator
Category: Diverter Valves
Seller: Machinery & Equipment Co
Location: Brisbane, CA
(3) Stainless steel 6" sanitary 3-way valves. One unit has actuator., Basis: Each, FOB.
Bakery Equipment Service #BES-160-DB, Spiral Dough Mixer, 200 kg, 1 HP, 220V, 2005
Category: Dough Mixers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bakery Equipment Service
Model: BES-160-DB
Year: 2005
Bakery Equipment Service, model BES-160-DB, spiral mixer, 200 kg dough capacity, digital control, 220v, 3ph/60hz, 1 HP. New in 2005. Serial number 2310067..
Machinery & Equipment Co has 9 more
listings in Dough Mixers.
16" width x 36" D x 24" H Custom Compactors Corp, Baler, Hydraulic
Category: Downstroke (Vertical) Balers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Custom Compactors Corp
Convenience-Pac baler/compactor, manufactured by Custom Compactors Corp., 24" x 16" x 36" deep. Hydraulic, on stand., Basis: FOB.
Aro #650305, Drum Pump, Air Driven, 150 PSI
Category: Drum Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Aro
Model: 650305
Drum pump, pneumatically actuated, air driven, rated for 150 PSI. Manufactured by Aro, Model 650305, serial# 89116-6. Good condition., Basis: FOB.
Machinery & Equipment Co has 5 more
listings in Drum Pumps.
Dryers and Coolers
11 Results
16" x 120" Hosokawa #SL-16-10, Paddle Dryer, Carbon Steel, 15 HP
Category: Dryers and Coolers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hosokawa
Model: SL-16-10
Hosokawa Bepex Solidaire Paddle Dryer Cooler, Model SJ-16-10, continuous thin-layer paddle dryer. Constructed of carbon steel contact parts. With ultra-high thermal efficiency, its high-speed paddles effectively disintegrate loose agglomerates while preserving particle size. The adjustable paddles grant control over ...more
Machinery & Equipment Co has 10 more
listings in Dryers and Coolers.
A-One #CBD-48, Tote Dumper, Stainless Steel, 38" x 36" tote receiving area, 48" dump height, 110 V.
Category: Dumpers and Drum Dumpers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: A-One
Model: CBD-48
A-One Manufacturing Stainless Steel Tote Dumper, model CBD-48, pneumatically operated. Tote receiving area measures 38" X 36". Unit has a dump height of approximately 48". Includes controls for up/down along with emergency stop/start switch, rated for 110 volt. Serial # 21375. Previously used in food operation and in ...more
Machinery & Equipment Co has 22 more
listings in Dumpers and Drum Dumpers.
Dust Collectors
71 Results
3 scfm MAC #54AVS9, Bin Vent, (3) Pulse Jet Dust Collector, Carbon Steel, 67 sq.ft., 26" width x 26" L x 58" tall housing, (9) 6" dia.x 54" bags, 18" x 30" side access door, 1 HP, 3450 RPM, 208/230/460 V.
Category: Dust Collectors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Mac
Model: 54AVS9
MAC Bin Vent (3) Pulse Jet Dust Collector, Model 54AVS9, carbon steel, approximately 67 square feet filter area, 3.6 SCFM. Housing measures 26" wide X 26" long X 58" tall, (9) 6" diameter X 54" bags,(less bags & cages). 18" X 30" side access door. Includes a side mounted blower, model 12SB, 1 Hp, 3/60/208/230/460 ...more
Machinery & Equipment Co has 70 more
listings in Dust Collectors.
6 HP Reimers #RH60, electric boiler, 60 KW, 100 psi, 460 Volts, 1985, #S736803
Category: Electric Boilers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Reimers
Model: RH60
Year: 1985
Riemers electric boiler model RH60, 6.6 HP, rated at 100 PSI steam service and 460 volt electrical. Electrical capacity is 60 kW. Unit has 1" in/out and is mounted on 3" channel frame. Age approximately 1985. Serial number 3549 and list number 145978. Unit appears to be in good condition., Stock Number S736803 Model ...more
Machinery & Equipment Co has 2 more
listings in Electric Boilers.
Electrical Phase Converters
1 Result
1 HP Allen-Bradley #1332-YAA, Variable frequency converter
Category: Electrical Phase Converters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: ALLEN-BRADLEY
Allen-Bradley variable frequency converter, for 1 HP motor drive. Unit is model 1332-YAA, serial number 03320. Converter is installed in stainless steel water proof cabinet complete with power disconnect. Last used as speed controller on Waukesha 1 HP pump. Excellent condition., Basis: FOB.
Elevator Hearth Furnaces
1 Result
25' 9-3/4" x 72" Ram Engineering, pinions thru hydraulic drive, 20 HP, bucket elevator, 1987
Category: Elevator Hearth Furnaces
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ram Engineering
Year: 1987
Multiple hearth furnace, 25'9-3/4" diameter x 6 hearth manufactured by Ram Engineering Environmental Services (New Canaan, CT). 20 HP motor drives (2) pinions through a hydraulic drive. Pinions drive main gear and center shaft. Last operated at approx 2000 deg. F. Includes combustion fans, cooling fans, feed ...more
Alloy Products #T-316L, 316L Stainless Steel pressure tank, 6 gallon, 9" dia x 25" straight side, 15 psi, 1995
Category: Epoxy Lined Tanks
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Alloy Products
Model: T-316L
Year: 1995
Alloy Products T-316L stainless steel pressure tank, 6 gallons, rated for 15 PSI maximum, measures 9" diameter x 25" straight side, new in 1995, Serial number 108019-002. Unit is portable on casters., Materials of Construction: 316L Stainless Steel, Internal Pressure: 15 PSI, Basis: FOB, Gallons: 6.
Machinery & Equipment Co has 4 more
listings in Epoxy Lined Tanks.
Evaporators
5 Results
11.65 sq.ft. Buflovak/Blaw Knox, Anhydrous Caustic Plant Evaporator/Drum Flaker, 126 lbs/hr. water evaporation, 54 lbs/hr. finished caustic flakes, 6.5" diameter x 8" L drum, 185 psi @ 750 F shell, 14.7**
Category: Evaporators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Blaw-Knox
Year: 1987
Buflovak anhydrous caustic plant evaporator / drum flaker. Complete system rated at 126 pounds per hour water evaporation, 54 pounds per hour finished caustic flakes. System includes 11.65 sq. ft. Buflovak evaporator / vapor liquid separator, type 316 stainless steel, Equipment number EV-501, serial number 18123. ...more
Machinery & Equipment Co has 4 more
listings in Evaporators.
Sandvik #MT520, Roadheader Excavator, 70 sq.m max profile, 100 MPa compressive strength, 0-20 m/min tramming, 2.38 m/sec cutter head, 7.1 m cut H, 10.3 m cut width, 1000/1140 V, 537 kW
Category: Excavators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Sandvik
Model: MT520
Sandvik Roadheader Excavator, Model MT520 for use in tunneling, as well as salt, potash and chalk mining with a maximum profile up to 70m. It has a modular design that offers more flexibility than standard Roadheaders and works in most rock conditions up to 100 MPa compressive strength. Rated for 537 kW total ...more
Extruders
5 Results
3" Starkey Machinery #851, Pugmill/Extruder & Automatic Wire Cutter, 10-1/8" x 9.5" hopper, 4" pugmill auger, 4" diameter Vacuum chamber, 1.5 HP, 240 V
Category: Extruders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Starkey Machinery
Model: 851
Starkey Machinery Pugmill/Extruder and Automatic Wire Cutter, Model 851. Includes 10 1/8" x 9 1/2" hopper which self feeds 1 cubic foot batches using twin hopper shafts. s 4" (100mm) pugmill auger which tapers to 3" (75mm), powered by 1.5 HP pugmill motor. Material is extruded by 2 HP extruder motor. Vacuum chamber ...more
Machinery & Equipment Co has 4 more
listings in Extruders.
Extruders and Extrusion Lines
4 Results
2.5" NRM #2-5-24, Extruder, single head, electrically heated, 2.5" diameter x 24" L plastic extruder, 40 HP, 1725/2100 RPM, 500 V
Category: Extruders and Extrusion Lines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Nrm
Model: 2-5-24
NRM extruder, 2.5" diameter x 24" long plastics extruder, model 2-5-24.1 PM IV RH-1CANVTD, single head carbon steel extruder. Unit is electrically heated, air cooled 4 zone non-vented barrel, water reed throat with hopper. Unit is driven by 40 hp, 500 volt, 1725/2100 rpm motor. Unit includes electrical panel, serial ...more
Machinery & Equipment Co has 3 more
listings in Extruders and Extrusion Lines.
Alstom, Industrial Fan, 200 HP, 300 hours run-time
Category: Fans
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Alstom
Alstom 200 HP Industrial Fan, includes motor, stand, coupling and spare bearings. Includes 200 HP motor has less than 300 hours run-time. Originally installed as part of 60" Roller Mill System. Very good condition., HP: 200, Basis: FOB.
Machinery & Equipment Co has 2 more
listings in Fans.
Fermentation Units
11 Results
B Braun #ES10, Fermenter, 15 liter/4 gallon capacity, 2.5 liter jacket capacity, -1/+3 bar @ 150 deg. C internal, -1/+4 bar @ 150 deg. C jacket, 0.75 kW, 1988
Category: Fermentation Units
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: B Braun
Model: ES10
Year: 1988
Fermenter, 15 liter capacity, manufactured by B Braun, Model ES10 Biostat fermenter. Capacity 15 liters. Internal pressure rating -1 / +3 bar @ 150 degrees c. Jacket pressure rating -1 / +4 bar @ 150 degrees c. Jacket capacity 2.5 liters, 0.75 kW motor, under-drive agitator. Built new 1988. Serial number 315. Includes ...more
Machinery & Equipment Co has 10 more
listings in Fermentation Units.
50 gallon Tank, fiberglass reinforced plastic, 16" diameter x 52" H, 1 bar @ 100°F, 1997
Category: Fiberglass Tanks
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tank
Year: 1997
Tank, 50 gallon, constructed of fiberglass reinforced plastic, 16" diameter x 52" high with flat top and bottom. Used on 15% HCL. Pressure rating is 1 bar at 100 deg. C. Complete with numerous flanged nozzles. New 1997., Materials of Construction: Fiberglass, Internal Pressure: 15 PSI, Basis: FOB, Gallons: 50.
Machinery & Equipment Co has 10 more
listings in Fiberglass Tanks.
Filling Equipment (Fillers)
106 Results
Accutek #Mini-Pinch, 8-Head Filler, Stainless Steel, 100 CPM max, 0.33-16 oz/10-475 ml fill size, 1/8" diameter Nozzles, 70 psi @ 1 scfm, 110 V, 1997
Category: Filling Equipment (Fillers)
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Accutek
Model: MINI PINCH
Year: 1997
Accutek 8-head Filler, Model Mini Pinch, Sanitary Stainless Steel, Manifold 1/8" diameter filling nozzles, includes pneumatic dosing pump, Product Speed: Up to 100 CPM, Fill Size: 0.33 to 16 ounces (10 mL - 475 mL). Electrical: 110 Volt, 60 Hz, single phase, 8 Amps. Air requirements: 70 PSI at 1 SCFM, Serial number ...more
Machinery & Equipment Co has 105 more
listings in Filling Equipment (Fillers).
Atmos-Tech Industries #PTC2626-26SS, Air Filter, Stainless Steel HEPA cart, 2' x 26" x 26" tall interior, 93 FPM, 120 V, 2008
Category: Filtration Systems
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Atmos-Tech Industries
Model: PTC2626-26SS
Year: 2008
Atmos-Tech Industries, Model PTC2626-26SS, stainless steel HEPA cart. Unit manufactured new in 2008, with average velocity of 93 FPM, 120 Volts, single phase, 60-cycle, 7.0 AMPS. Unit measures 2' x 26" x 26" tall interior. Serial number 111072., Materials of Construction: Stainless Steel, Basis: FOB, Air Flow: 93 ...more
Machinery & Equipment Co has 4 more
listings in Filtration Systems.
Finisher Pulper Parts & Screens
1 Result
Brown #202, Pulper/Finisher Blades, Stainless Steel, Various Sizes
Category: Finisher Pulper Parts & Screens
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Brown
(9) Brown Model 202 Pulper/Finisher, stainless steel blades only., Sizes:, (1) 30873, 13 pounds 4 ounces, 1/2 R.H., (1) 30873, 13 pounds 5 ounces, 1/2 R.H., (1) 30873, 13 pounds 7 ounces, 1/2 R.H., (1) 30876,13 pounds 4 ounces, 2-1/2 R.H., (1) 30876, 13 pounds 5 ounces, 2-1/2 R.H., (1) 30876, 13 pounds 14 ounces ...more
9.5 HP Fulton Boiler #ICS 9.5-LE, 100 PSI, 2005
Category: Firetube Boilers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fulton
Model: ICS
Year: 2005
(7) Fulton boilers, 9.5 HP, Model number ICS 9.5-le rated for 100 PSI, natural gas, 328 lbs/hr steam, fuel-fired steam boiler, 399,000 max. BTU/hr input, 13" max wc, 2.4" min wc. burner motor rating - 120 volt, 1-phase, 60Hz, 13.8 amps. controls rating - 120 volt, 1-phase, 6.0 amps. 3/8" head & shell thickness. ...more
Machinery & Equipment Co has 5 more
listings in Firetube Boilers.
Fitzpatrick #F-9, Fitz Mill, Pipe Feed, Stainless Steel, 9" width, 16 stair-step fixed hammers, 30 HP, 220/440V
Category: Fitz Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fitzpatrick
Model: F-9
FitzMill, Fitzpatrick model F-9, stainless steel, 16 stair-step fixed hammers, direct connected to 30 HP 220/440 volt, 3/60Hz cycle motor, on frame, water cooled bearings. Serial number F-9/2724., HP: 30, Type: Pipe Feed, Materials of Construction: Stainless Steel, Basis: FOB, Width: 9".
Machinery & Equipment Co has 7 more
listings in Fitz Mills.
Flakers
2 Results
18" x 36" Drum Flaker, 4.5" Blades
Category: Flakers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Frozen Block Hydraflaker offers efficient flaking capabilities with an approximate 18" diameter X 36" face drum with segmented rows of 4 1/2" wide cutting blades. Constructed of stainless steel. Previously used in fish food processing facility., Materials of Construction: Stainless Steel, Previous Use: Frozen Blocks ...more
Machinery & Equipment Co has 1 more
listing in Flakers.
Gansow IBC #CLT40B50, floor scrubber/dryer with charger, serial #N8000155778, 2007
Category: Floor Scrubbers and Sweepers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Gansow
Model: CLT40B50
Year: 2007
Gansow IBC Model CLT 40 B 50 floor scrubber / dryer. Scrubbing machine, floor cleaning machine, mopping machine -Device: width: 22-Pract. Area performance: 1323 square meters per hour, with Charger. Year of manufacture: 2007, Serial number N8000155778., Basis: FOB.
Machinery & Equipment Co has 1 more
listing in Floor Scrubbers and Sweepers.
Flotation Cells
2 Results
Metso #32X32-2-Cell, Attrition Scrubber, 2-cell, 32" x 32" x 36" deep Tank, 15 HP, 875 RPM, 230/460 V
Category: Flotation Cells
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Metso
Attrition scrubber, 2-cell, Svedala/Metso, model 32X32-2 cell, serial number 199276001, 0603-07, chamber measures 32" X 32" X 36" deep, steel tank. Includes 15 HP, 3 phase, 230/460 V, Frame 286T, 875 RPM motor. Last used on tailings re-processing., Basis: FOB.
Machinery & Equipment Co has 1 more
listing in Flotation Cells.
Flow Meters
13 Results
Endress & Hauser #83F08-AFUAAAACBAAA, Flowmeter, Stainless Steel, 3/8" Tri Clamp, -58 to 392°F
Category: Flow Meters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Endress&hauser
Model: 83F08-AFUAAAACBAAA
Endress+Hauser Promass F Flowmeter 83F08-AFUAAAACBAAA, 316 Stainless Steel, Size: DN08/3/8" Tri Clamp, Temperature: minus 50 degrees Celsius to positive 200 degrees Celsius (minus 58 degrees Fahrenheit to positive 392 degrees Fahrenheit)., Basis: FOB.
Machinery & Equipment Co has 12 more
listings in Flow Meters.
Fluid Bed Dryers
10 Results
Aeromatic #S8 2111, Fluid Bed Dryer, Stainless Steel, 750 liter container, 28 cu.ft., 48223200 kcal/hr., 50 HP, 460 V
Category: Fluid Bed Dryers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Aeromatic
Model: S8 2111
750 liter, 316 Stainless Steel Sanitary Aromatic Fluid Bed Dryer, Model S8 2111, 316 & 304 Stainless Steel Construction, approximately 750 liter container. 50 HP, Fully-Integrated Color Graphical Control, (2) Roll-Out Bowl, Power Bowl Lift, Explosion Relief Flap, Pneumatic Air Damper Flap, Pneumatic Safety Clamps ...more
Machinery & Equipment Co has 9 more
listings in Fluid Bed Dryers.
Food and Meat Grinders, Saws, Chubs and Stuffers
17 Results
Biro Manufacturing #EMG-32, Meat Grinder/Chopper, Stainless Steel, 7.5 HP, 60 Hz, 3 Ph.
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Biro Manufacturing
Model: EMG-32
Biro Meat Grinder/Chopper, Model EMG-32. Stainless steel construction. Unit includes controls for mix and grind speed along with start/stop. Driven by 7.5 HP, 3/60 Hz motor. s new auger drive shaft. Unit was in operation until March 2021 and is reported to be in good condition., Basis: FOB.
Machinery & Equipment Co has 16 more
listings in Food and Meat Grinders, Saws, Chubs and Stuffers.
GEA, Westfalia #GSC45-06-177, clarifier, 25 HP, belt driven, VFD controls, serial #1727-409
Category: Food Centrifuges
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Gea
Model: GSC45-06-177
Used GEA Westfalia GSC 45-06-177 clarifier. Previously used in a brewery. Belt driven approximately 25 hp vertical motor. 7230 RPM bowl speed. On a stainless steel brewery skid with piping, pumps, turbidity sensors and Allen Bradley Panel view 1000 touch screen controller. Optek 4000 product feed and discharge ...more
Food Cooling Tunnels
1 Result
Cooler, ambient air cooled, 26" x 4" opening clearance, 28" width x 14' L wire mesh conveyor, 3/4 HP, 1140 RPM, 230/460 V.
Category: Food Cooling Tunnels
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Cooler, ambient air cooled, with 3/4 HP, 208-230/460V, 1725 RPM blower, Unit has clearance of 26" x 4" opening, stainless steel wire mesh conveyor, 28" wide x 14' long, on carbon steel frame - not adjustable, run by 3/4 HP, 230/460V, 1140 RPM motor., Basis: FOB.
McKenzie, commercial dehydra, tray-and-cart tunnel dryer, 1.3 million BTU burner (natural gas, propane or butane/propane mix)
Category: Food Dryers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Mckenzie
McKenzie Tray-and-Cart Tunnel Dryer, manufactured by Commercial Dehydrator Systems, s 1.3 million BTU burner (natural gas, propane or butane/propane mix), 15 HP circulating fan, digital controls, automated humidity control system. Stainless steel construction with double-wall insulation to prevent heat loss. 3-phase ...more
Baker #MP, Mixer, continuous, twin screw, 5" diameter x 36" L screws, 150 psi @ 338 F jacket, 15 HP, 63.3-190 RPM output
Category: Food Extruders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Baker
Model: MP
Mixer, Baker Perkins, model MP, multi purpose, twin screw, 5" diameter screws x 36" long, with all edges of wetted parts being type 316 stainless steel, the remainder is carbon steel. The units are jacketed for 150 PSI @ 338 degrees, 15 HP motor to Reeves vari-speed drive with a final output of 63.3 RPM up to 190 RPM. ...more
Machinery & Equipment Co has 13 more
listings in Food Extruders.
Schenk Niro #1200/175, sheet/pad filter, Stainless Steel, 48" x48", 295 plates, jacketed tank, 1998
Category: Food Filters
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Schenk Niro
Model: 1200/175
Year: 1998
SCHENK Niro Model 1200/175 Sheet/Pad Filter, 1200 mm x 1200 mm plates (48 x 48), plates are 316 stainless steel construction and frame is 304 stainless steel. Rated for a Capacity 400 hl per hour, for Beer, Wine, Juice. Includes hydraulic contact pressure with (295) high performance chambers HFK, (2) end chambers HFK ...more
Anko #AFD-888, Potsticker/Gyoza Former, 9000 gyozas/hr., 18-20 g/24-26 g/28-30 g Sizes, (16) pockets for potsticker dough, 3" width folding jaws, 9" width compression, rollers, 3300 width, 220 V, 2013
Category: Food Formers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Anko
Model: AFD-888
Year: 2013
Anko Potsticker/Gyoza former, Model AFD-888. Includes a total of 16 pockets for potsticker dough, 3" wide folding jaws. Dough is fed through 9" wide compression rollers leading to second set of rollers, feeding stainless steel belt conveyor with the feed to molding jaws. Complete with stainless steel hopper and ...more
Machinery & Equipment Co has 10 more
listings in Food Formers.
Carpigiani #NK400, blast freezer, Stainless Steel, blast chilling, manual defrosting; blast freezing, probe heating, fast blast freezing & chilling & pre-freeze buttons, 2017
Category: Food Freezers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Caepigiani
Model: NK400
Year: 2017
Used Carpigiani blast freezer, Model NK 400 GF 161 ARI BF P. Unit is stainless steel and includes an evaporator with hinged stainless-steel deflector for easy cleaning and inspection. Doors are reversible and the digital control includes the following: screen showing temperature, times and processes; time setting; ...more
Machinery & Equipment Co has 11 more
listings in Food Freezers.
4 cu.ft. Hopper, Stainless Steel, 26" x 26" x 34", 8" diameter Discharge
Category: Food Hoppers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Hopper, 4 cubic feet, 26" x 26" x 34", stainless steel with pyramid bottom to 8" diameter discharge. Unit is open top, last used as feed funnel for a meat grinder., Discharge Type: Bottom Discharge, Cubic Feet: 4, Materials of Construction: Stainless Steel, Basis: FOB.
Machinery & Equipment Co has 12 more
listings in Food Hoppers.
Cozzini #CVM5-Versamill, continuous emulsion mill, Stainless Steel, 400 lb. capacity hopper
Category: Food Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cozzini
Model: CVM5-VERSAMILL
Year: 2018
Cozzini CVM5 Versamill Continuous Emulsion Mill, stainless steel construction, 400 pounds capacity hopper. The Cozzini Emulsion Mill utilizes a series of 5" plate and knife cutting configurations. Driven by 50 HP motor, 460 Volt, 3-phase, 60 Hz, 66 AMPS. Includes Allen Bradley PanelView programmable digital system. ...more
Machinery & Equipment Co has 5 more
listings in Food Mills.
Amana #QMP-2300, Batch Microwave, 36" diameter x 32" deep, 31" diameter turntable, 480V, 2000
Category: Food Ovens
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Year: 2000
Amana RadarLine, Model QMP 2300 batch microwave. Stainless steel construction. Chamber measures: 36" diameter x 32" deep with 31" diameter turntable. Unit complete with digital controls and is divided into 2 parts: control parts (pictured) and the power generator box (not pictured). Previously used to thaw frozen meat ...more
Machinery & Equipment Co has 9 more
listings in Food Ovens.
Insta-Pro #2000, continuous expeller press, oil, vertical screw feed, belt driven drive
Category: Food Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Insta-Pro #2000
Used Insta-Pro Model 2000 continuous expeller press featuring a 7.2-to-1 cage-length-to-cage-diameter ratio, a vertical screw feed. Designed for mechanical oil extraction from oilseeds such as soybeans, canola, and sunflower seeds. This unit includes a belt-driven drive. Serial Number 70., Basis: FOB.
Food Processing Tanks
10 Results
60 gallon Tamco Industries, polyethylene mixing tank, 22" dia. x 36" straight side height
Category: Food Processing Tanks
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Tamco
Tamco Industries Polyethylene 60-Gallon Mixing Tank, diameter is 22" and straight side height of 36" with a 3/4" bottom side outlet. a 1/4 hp 115/230 volts 1ph/60 ,1750 rpm motor. The mixer s a 36"long x 5/8 diameter shaft with 2 propellers 6" diameter. Mounted on a sturdy mild steel frame., Tank Dimensions: Diameter ...more
Machinery & Equipment Co has 9 more
listings in Food Processing Tanks.
Food Tanks - Miscellaneous
3 Results
235 gallon Mueller, Stainless Steel jacketed & agitated tank, 48" dia. x 30" straight side, 90 psi
Category: Food Tanks - Miscellaneous
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Mueller
Year: 1986
Mueller 235 gallon stainless steel jacketed and agitated tank. Unit measures 48" diameter X 30" straight side with cone bottom leading to 3" diameter discharge. Tank is jacketed for 90 PSI at 400 degrees Fahrenheit. Includes agitation with scrape attachment on bottom and side of shaft along with paddle attachment on ...more
Machinery & Equipment Co has 2 more
listings in Food Tanks - Miscellaneous.
Forklift Truck Attachments - Miscellaneous
1 Result
Valley Craft #7398-C-0214, Mechanical Fork-Lift Attachment, 800 lbs., for 55 gallon w/24" & 23" diameter drums
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Valley Craft
Model: 7398 C 0214
Valley Craft Drum Snatcher Mechanical Fork-Lift Attachment, Model number 7398 C 0214. Capacity 800 pounds. For 55-gallon steel ringed (23"and 24" diameter) drums., Basis: FOB.
Forklifts
8 Results
2000 lb. #20-S30TN, Forklift, electric w/charger, ride-on pallet lift, 220 V charger
Category: Forklifts
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: 20-S30TN
Forklift, 2000#, model 20-S30TN, electric with charger, ride-on pallet lift. Complete with 220 volt charger for 24 DC. Fair condition., Maximum Capacity: 2,000 lbs., Basis: FOB.
Machinery & Equipment Co has 7 more
listings in Forklifts.
Form Fill Sealing Machines
24 Results
Autowrappers Ltd. #RC100, Form, Fill & Seal Machine, 1-3/4" diameter x 3/4" deep Pockets, 6" x 6' take-away conveyor, 220/240 V, produce round filter paper bags
Category: Form Fill Sealing Machines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Autowrappers Ltd.
Model: RC100
Autowrappers Ltd. Model RC100 Form, Fill & Seal machine for producing round filter paper bags with tea leaves, coffee grounds or similar. Machinery number: 6164 794. Pockets on machine measure 1-3/4" diameter X 3/4" deep. 220/240V motor. Previously used to fill 68 mm bags with herbal tea leaves into heat seal-able ...more
Machinery & Equipment Co has 23 more
listings in Form Fill Sealing Machines.
10.5" x 21" VirTis #Genesis 25 XL, Freeze Dryer/Lyophilizer, 10.5" width x 21" L chamber, (6) 10" width x 20" deep trays w/1.5" sidewalls, 165 psi, 208/230 V, 1996
Category: Freeze Dryers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Virtis
Model: GENESIS 25 XL
Year: 1996
VirTis Freeze Dryer/Lypholizer, Model Genesis 25 XL, Item number 342626, serial number 209207, 316 Stainless Steel contacts. Drying chamber measures 10-1/2" wide X 21" long. Complete with (6) trays measuring 10" wide x 20" deep with 1-1/2" sidewalls. Unit has a temperature range from minus 58 degrees Celsius to minus ...more
Machinery & Equipment Co has 1 more
listing in Freeze Dryers.
Freezers & Plate Chillers
2 Results
30" x 60" Plate Chiller, 2 plates, Stainless Steel
Category: Freezers & Plate Chillers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Plate chiller, stainless steel construction, includes (2) plates where refrigerant will be pump through and water sprayed/cascade over the plates to cool product. Plates measure 30" wide x 60" long, includes stainless steel catch tank. previously used at food plant and appears to be in good condition., Basis: FOB ...more
Machinery & Equipment Co has 1 more
listing in Freezers & Plate Chillers.
Belshaw #TG-50, Glazing System, Stainless Steel, 50 donuts/hr., 8.98 HP, 208 V, 2010
Category: Fryers for Cooking
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Belshaw
Model: TG-50
Year: 2010
Belshaw glazing system, all stainless steel construction, rated for 50 donuts per hour. Includes Belshaw Model TG-50 donut Thermoglaze glazing machine. Rated for 32.2 AMS, 6.7 kW (8.98 HP), 208V, single phase, 60 Hz. Includes manual and some spare parts. New in 2010. Only used for testing purposes., HP: 8.98, Basis: ...more
Machinery & Equipment Co has 4 more
listings in Fryers for Cooking.
Fume Hoods
8 Results
Captair, Fume Hood, 29" width x 19" L x 24" H chamber, (2) access holes, 115 V.
Category: Fume Hoods
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Captair
Captair Fume Hood, Type Powdercap 811, serial number 120 2004. Chamber measures 29" wide X 19" long x 24" high with hinged door and two (2) access holes. Power requirements are 115 V, single phase, 60 Hz, 50 Watts. Good condition., Measurements: 19" Long x 29" wide x 24" high, Basis: FOB.
Machinery & Equipment Co has 7 more
listings in Fume Hoods.
Aerzen #Series VM30, Biogas Oil-Injected Screw Compressor, 640 cfm, 8 GPM pump, 200 psi shell, 150 psi tube, 300°F, 6" inlet, 4" outlet, 75 HP, 3565 RPM, 460 V., 2011
Category: Gas Compressors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Aerzen
Model: SERIES VM30
Year: 2011
Aerzen biogas oil-injected screw compressor, series VM30, 6" inlet, 4" outlet. Rated for volume flow up to 18, 23 m/min (approximately 640 CFM). Driven by 75 HP, 460 V, 3565 RPM, 3/60 Hz motor (Class 1, Group D: electric motor for hazardous locations). New in 2011. Serial number 1033324, Order number 61-328247/00. ...more
Machinery & Equipment Co has 4 more
listings in Gas Compressors.
York #SAB128HF, Rotary Compressor, R717, 25 bar, 2950/3550 max speed, 455/548 max swept volume, 2000
Category: Gas Screw Compressors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: York
Model: SAB128HF
Year: 2000
York model SAB128HF rotary compressor untilizing R717 refrigerant, maximum working pressure 25 bar, maximum speed is 2950/3550, maximum swept volume 455/548, shop number 118562, manufactured in 2000., Basis: FOB, Refrigerant: R717, Pressure: 25 bar (362 PSI).
Gasoline or Propane Generators
1 Result
100 KW Roilien #H884U, Propane Generator, 240 V, 300 Amps, 625 hours
Category: Gasoline or Propane Generators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Generator, propane, 100 kW at 240 volt, 300 amp service. Unit is skid mounted complete with Roilien model H884U engine, propane service. Generator has 625 hours use, stand-by only, with weather proof enclosure is complete with switch gear controls and electricals., KW: 100, Basis: FOB.
2.5" Stem & Yoke #Class-300, Gate Valve, Carbon Steel, 740 psi @ 100 deg. F, 410 psi @ 800 deg. F, 2019
Category: Gate Valves
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Stem & Yoke
Model: CLASS 300
Year: 2019
WA Outside Stem and Yoke Gate Valve, Class 300, carbon steel construction, Size: 2.5", 2-1/2" diameter inlet/outlet, Body: WCB, Stem: F6A CL3, Temperature: 740 PSI at 100 degrees Fahrenheit / 410 PSI at 800 degrees Fahrenheit. New in 2019. Serial number 19144018108. Unused., Diameter: 2.5", Materials of Construction: ...more
Machinery & Equipment Co has 4 more
listings in Gate Valves.
.25" Micro Gear Pump #O/C-GA-T23, Stainless Steel, 2 HP, 208/230/460V, 3450 RPM
Category: Gear Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Model: O/C GA-T23
Stainless steel Micro gear pump. Unit is model O/C GA-T23, has 1/4" inlet and outlet. J12KSE, with 2 hp, 208/230/460 volt, 3 phase, 3450 rpm motor. Unit was mfg new 03/08, serial number 1397958., HP: 2, Basis: FOB, Inlet and Outlet:.25" Inlet and.25" Outlet, Contact Parts: Stainless Steel.
Machinery & Equipment Co has 12 more
listings in Gear Pumps.
Gearboxes (Gear Reducers - No Driving Unit)
4 Results
40.2 HP @ 1750 RPM, Horsburgh and Scott, Reducer, Gear Box, 1.25 S.F., 56.30 :1 ratio, 50 HP - 220/440 V AC drive
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Reducer, gear box, 40.2 HP, manufactured by Horsburgh and Scott. Unit is a size LD3200H parallel feed and discharge with a ratio of 56.3:1. Unit rated at 1750 RPM input. Gear box has service factor of 1.25. Serial number G9057. Parallel in/out, unit directly connected to 50 HP 220/440 volt AC drive. Unit last run as ...more
Machinery & Equipment Co has 3 more
listings in Gearboxes (Gear Reducers - No Driving Unit).
14 sq.ft. Pyrex #135GRB, glass shell & tube heat exchanger, 7 tubes, 3/4" OD x 98" long
Category: Glass Heat Exchangers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Pyrex
(50) Heat exchanger, Pyrex glass shell, shell & tube construction, Model 135GRB, unit s 13.50 square feet heat transfer surface area with 7 tubes, 3/4" od x 98" long. Unit is all glass construction and contact parts. Exchanger is rated for 50 PSI at 375 degrees Fahrenheit. Both sides with a maximum of 162-degree ...more
Machinery & Equipment Co has 1 more
listing in Glass Heat Exchangers.
Glass Lined Tanks & Vessels
11 Results
30 gallon Pfaudler, Glass-Line Pressure Tank, 20" diameter x 22" straight side, (2) 2" & 1.5" top inlet, 2" center bottom discharge, 4" patch, 30 psi @ 300 F internal
Category: Glass Lined Tanks & Vessels
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Pfaudler
Pfaudler glass-lined 30 gallon pressure tank rated at 30 PSI at 300 degrees Fahrenheit internal. Tank measures 20" diameter x 22" straight side with dish bottom, (2) 2" and 1-1/2" top inlet and 2" center bottom discharge. Unit has plunger valve. Has (1) 4" patch., Materials of Construction: Glass-Lined, Internal ...more
Machinery & Equipment Co has 10 more
listings in Glass Lined Tanks & Vessels.
1" Aquasyn, Diaphragm Valve, Stainless Steel, Tri Clamp
Category: Globe Valves
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Aquasyn
(43) Aquasyn 1" 316L Stainless steel Diaphragm valve, includes sanitary tri-clamp connections., Diameter: 1", Materials of Construction: 316L Stainless Steel, Basis: Each, FOB.
Glove Boxes
3 Results
Flanders Absolute Isolation, Stainless Steel, Isolator Glove Box, 59" L x 24" width x 28" tall Cabinet, 120 V, 3 ports w/gloves, on wheels
Category: Glove Boxes
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Flanders
Flanders Absolute Isolation isolator Glove Box. Cabinet measures 59" long x 24" wide x 28" tall. Unit has 3 ports with gloves. All stainless steel construction, mounted on wheels. Unit is 120V, single phase, 60 Hz., Basis: FOB.
Machinery & Equipment Co has 2 more
listings in Glove Boxes.
600 gallon Glycol Chiller, 63" x 44.5" x 49" H plastic tank, (1)1.5 kW pump w/fan, (1) Busch pump
Category: Glycol Systems
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Glycol chiller with 600 gallon plastic tank. Tank measures 63" x 44.5" x 49" high. s (2) pumps for inlet/outlet, (1) 1.5 kW pump with fan, and (1) Busch pump, 1" connections., Previous Use: Brewery operation, Basis: FOB.
Granulators
2 Results
5" x 18" Colton, Granulator, Stainless Steel, 14" x 16" hopper inlet, 6" diameter Discharge, 1/2 HP
Category: Granulators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Colton
Colton granulator, includes hopper 14" x 16" inlet, 6" diameter discharge. Unit is stainless steel, 1/2 HP V-belt drive. granulator measures 5" x 18", carbon steel frame, on stand., HP:.5, Materials of Construction: Stainless Steel, Basis: FOB.
Machinery & Equipment Co has 1 more
listing in Granulators.
Gravametric Feeder and Loaders
4 Results
Tecweigh, Bulk Weigh Feeder, Stainless Steel, 36" diameter x 5' H hopper, 2" diameter Auger, 1 HP
Category: Gravametric Feeder and Loaders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tecweigh
Tecweigh bulk weigh feeder, includes 36" diameter x 5' high stainless steel hopper. Hopper is agitated and feeds to 2" diameter stainless steel auger driven by 1 HP motor. Hopper and auger are mounted on load cells and frame. Includes mild steel wheels to ride on rail. Includes top mounted Fike pressure relief ...more
Machinery & Equipment Co has 3 more
listings in Gravametric Feeder and Loaders.
Grinding Mills - Ball, Pebble, Sag, Mining
27 Results
8" x 4' Humbolt-Wedag #20U, Palla Vibratory Ball Mill
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Palla
Palla Vibratory Ball Mill, 8" diameter X 50" long (200 mm X 1249 mm). Manufactured by Humbolt - Wedag, model 20U, serial number 20181; was demo unit for trade shows. Mounted on stand, no motor., Diameter: 0.67', Type: Vibratory Ball Mill, Measurements: 8" Diameter X 50" Long, Basis: FOB.
Machinery & Equipment Co has 26 more
listings in Grinding Mills - Ball, Pebble, Sag, Mining.
Grinding Mills - Rod
6 Results
2.8' x 2.6' Rod Mill, 32" L x 30" width x 28" ID, (2) 6" Roller, 25 HP
Category: Grinding Mills - Rod
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Rod mill measuring 32" long x 30" wide x 28" id. Unit has mxing door and discharge door. 25 HP, TEFC motor. Bowl sits on roller (2) @ 6", no guard on drive. Hinge cover on cabinet, no nameplate data available., HP: 25, Diameter: 2.66', Measurements: 32" Diameter X 30" Long, Basis: FOB.
Machinery & Equipment Co has 5 more
listings in Grinding Mills - Rod.
Heat Exchangers - Carbon Steel Shell - Copper/Nickel Tubes
1 Result
475 sq.ft., 150 psi shell, 75 psi tube, Philadelphia Pipe Bending Co, Carbon Steel shell heat exchanger
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Year: 1995
Philadelphia Pipe Bending Company carbon steel shell heat exchanger, 475 sq. ft. Unit has 582 copper tubes, 5/16" diameter x 10' long. Shell side rated at 150 PSI @ 300 deg. F., tube side rated at 75 PSI @ 300 deg. F. Unit has bolt on heads on both ends, (2) 8" and (2) 6" flange type ports. Unit manufactured new ...more
Heat Exchangers - Carbon Steel Shell - Stainless Steel Tubes
3 Results
300 sq.ft., 50 psi, Davis Fabrication #1000A, horizontal design, 2 pass design, 50 tubes
Seller: Machinery & Equipment Co
Location: Chowchilla, CA
Mfr: Davis
Davis Fabrication shell & tube heat exchanger with Inconel tubes, Model 1000A, approximately 300 square feet surface area, 2-pass design. Includes (50) 2" diameter X approximately 11-1/2' long Inconel tubes with mild steel shell. Shell measures 20" diameter X 12' long with 8" diameter tube inlet & ...more
Machinery & Equipment Co has 2 more
listings in Heat Exchangers - Carbon Steel Shell - Stainless Steel Tubes.
Heat Exchangers - Karbate/Graphite Shell & Tubes, Glass Lined
6 Results
50 sq.ft. Kearney & Trecker Industries #100/50/1530, block type graphite heat exchanger, 75 psi
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kearney Industries
Kearney Industries block type graphite heat exchanger, approximately 50 square feet surface area, Model 100/50/1530, block graphite. Unit designed for 75 PSI, both sides. Cast iron housing. Includes 3/8" diameter X 15" long graphite tubes. Shell has 2" inlet/outlet, tube is 4" inlet/outlet., Square Ft.: 50, Materials ...more
Machinery & Equipment Co has 5 more
listings in Heat Exchangers - Karbate/Graphite Shell & Tubes, Glass Lined.
Heat Exchangers - Miscellaneous
1 Result
RAE #58SD15X72-6-1-W-F-R, Direct Steam Heat Exchanger, 400 psi, 39 coil weight, 72" L Copper tubes, 020 tube wall thickness, 5/8" O.D.
Category: Heat Exchangers - Miscellaneous
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Rae
Unused RAE Booster Coils direct steam heat exchanger, Model 58SD15X72-6-1-W-F-R, single row header less, coil weight: 39. Includes 5/8" O.D. Smooth wall copper tubes X 72"long, 020 Tube Wall Thickness, 0.008 Corrugated aluminum plate fin, 18-gauge, galvanized steel case, 2" NPT inlet and outlet, 400 PSI. Serial number ...more
Heat Exchangers, C/S Shell-Alloy, Hastelloy, Karbate, Monel, Graphite, Titanium Tubes
3 Results
45 sq.ft. American Standard, brass shell & tube heat exchanger, 3-pass, (116) 5/16" dia x 60" long tubes
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: American
American Standard shell and tube heat exchanger, approximately 45 SF surface area, 3-pass unit, constructed of brass. Shell measures 6-1/8" diameter x 60" long with 2" inlet/outlet, (116) tubes measure 5/16" diameter x 60" long with 1-1/2" inlet/outlet. End covers are carbon steel., Square Ft.: 45, Basis: FOB, Tube ...more
Machinery & Equipment Co has 2 more
listings in Heat Exchangers, C/S Shell-Alloy, Hastelloy, Karbate, Monel, Graphite, Titanium Tubes.
Heat Exchangers, Carbon Steel Shell - Carbon Steel Tubes
1 Result
975 sq.ft., 368 psi shell, 366 psi tube, Llsung, shell & tube heat exchanger, 8 pass, unused, 2021
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Llsung
Year: 2021
Unused Ilsung Corporation 8 Pass Shell & Tube Heat Exchanger, Approximate 975 Square Feet, Tema Type AET, Carbon Steel, Horizontal. Shell rated 368psi/Full Vacuum at 392 degrees F., (304) 1" diameter x 158" long tubes rated 366psi/Full Vacuum at 392 degrees F. Openings shell (2) 4", (2) 8", openings for tubes (2) ...more
Heat Exchangers, Stainless Steel Shell & Tubes
18 Results
13.5 sq.ft. Stainless Steel single pass shell & tube heat exchanger, 31 1" dia. x 20" long tubes
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel single pass shell & tube heat exchanger, approximately 13.50 square feet surface area, with (31) 1" diameter X 20" long tubes. Includes 2-1/2" diameter inlet and 1-1/2" diameter outlet. Last used at vitamin processing and packaging facility., Square Ft.: 13.5, Basis: FOB, Tube Measurements: 1" ...more
Machinery & Equipment Co has 17 more
listings in Heat Exchangers, Stainless Steel Shell & Tubes.
High Intensity Mixers and Blenders
15 Results
1 liter Key Technology #KG5, Bench Top High Shear Granulator/Mixer, 5.5" diameter x 3.5" deep Stainless Steel bowl, 1/1.5 HP, 1750/10000 RPM, 120 VAC
Category: High Intensity Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Key Technology
Key bench top high shear granulator/mixer Model KG5, 316 stainless steel bowl and base, with (1) 1 liter bowl, approximately 5.5" diameter x 3.5" deep, non jacketed bowl. Main impeller motor, 1 HP, D/C, 1750 RPM, 120 V, A/C = 11.5 FLA, Chopper motor, 1/5 HP, D/C, 10,000 RPM 120V A/C = 1.7 FLA, serial number JI-3405. ...more
Machinery & Equipment Co has 14 more
listings in High Intensity Mixers and Blenders.
High Pressure Air Compressors
2 Results
127 CFM, 435 PSI, Blow Molder #KM4A-2L, High Pressure Compressor System, 5500 BPH
Category: High Pressure Air Compressors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Blow
Model: KM4A-2L
Automatic 4-Cavity Blow Molding Machine, Model KM4A-2L, rated for 5500 bottles per hour output, powered by PLC and HMI system. Includes Parker high-pressure blowing valve, SMC Pneumatic cylinder, Omron sensors, and Schneider low-voltage electric components. Offered with Preform Unscrambler and 120 ML Blowing Mold ...more
Machinery & Equipment Co has 1 more
listing in High Pressure Air Compressors.
Mitts & Merrill #13CD, Hog Mill, Carbon Steel, 30" diameter x 13" width, 75 HP
Category: Hog Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Mitts & Merrill
Model: 13CD
Mill, Mitts & Merrill, Model 13CD, wood hog. Mill has 30" diameter x 13" wide solid rotor with adjustable knives. Requires up to 75 HP., HP: 75, Chamber Dimensions: 30" Diameter X 13" Wide, Materials of Construction: Carbon Steel, Basis: FOB.
Machinery & Equipment Co has 2 more
listings in Hog Mills.
Holoflite Dryers
9 Results
7" x 12' Metso #S0712-4, Holoflite Dryer, single screw, w/ 4" pitch on screw, 680 lbs./hr. flow capacity, 3.2 cu.ft. Trough, 26 S.F., 400 F,
Category: Holoflite Dryers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Metso
Model: S0712-4
Holoflite dryer, manufactured by Metso Minerals. Model S0712-4, single screw, 7" dia X 12' long with 4" pitch on the screws. Material flow capacity of 680 pounds per hour, material input rated for 400 degrees F, screw area of 26 SF, trough volume of 3.2 cubic feet., Diameter: 7" x 12', Basis: AIWI.
Machinery & Equipment Co has 8 more
listings in Holoflite Dryers.
Homogenizers
13 Results
BEE International #DeBee-2000, High Pressure Homogenizer, two-stage, 1 liter/min., 80 deg. C, 4000-45000 psi, 10 HP, 380/220 V
Category: Homogenizers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bee International
Model: DEBEE 2000
BEE International Micro Fluidizer Hi pressure homogenizer, Model DEBEE 2000, 316 stainless steel product contact surfaces, two-stage, rated 1 liter per minute, maximum flow rate with 80 degrees Celsius, maximum product inlet temperature, from 4,000 PSI to maximum 45,000 PSI with on board 10 Hp, 380/220 volt, 3-phase ...more
Machinery & Equipment Co has 12 more
listings in Homogenizers.
1' cu.ft. Hopper, Stainless Steel, 21" x 21" x 12" deep Hopper, 14" H cone bottom, 8" diameter Pipe inlet, 6" diameter Discharge
Category: Hoppers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel hopper, approximately 1.5 cubic feet, measuring 21" x 21" x 12" deep to cone bottom 14" high. Unit has 8" diameter pipe inlet and 6" diameter discharge, unitized on carbon steel frame., Discharge Type: Bottom Discharge, Cubic Feet: 1.5, Materials of Construction: Stainless Steel, Basis: FOB.
Machinery & Equipment Co has 40 more
listings in Hoppers.
Horizontal Separators
4 Results
12" x 6' TELE Machine, turbo separator / vacuum extruder, Carbon Steel, 15 kW gearmotor, 2014
Category: Horizontal Separators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tele Machine
Year: 2014
Vacuum Extruder / Turbo Separator, includes 12" diameter X 6' long paddle/auger section, 4-1/2' long paddle section, 16" long auger section, stainless steel paddles, 3" diameter carbon steel shaft and trough, Driven by 15 kW motor through gear reducer with 44.39:1 ratio. Rated for 0.8 to 1.5 tons/hr, 3.0 mpa ...more
Machinery & Equipment Co has 3 more
listings in Horizontal Separators.
Hydraulic Platen Press Machine
8 Results
300 Ton, TMP, Hydraulic platen press, 36" stroke, 36" x26" surface, 3000 psi, 1.5 HP
Category: Hydraulic Platen Press Machine
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Tmp
Technical Machine Products MPT 300 Ton Hydraulic Press, sideplate construction press designed for compression molding processes. Rated for a capacity of 300 tons, it has a pressing surface measuring 36" x 26" for molding operations. The press has a single opening and a stroke length of 36". Powered by a 20-1-5--1.5 HP ...more
Machinery & Equipment Co has 7 more
listings in Hydraulic Platen Press Machine.
1 GPM Parker #H-Pack, Hydraulic Pump, 5000 PSI, 20 gallon, 3 HP, 230/460V, 1170 RPM
Category: Hydraulic Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Parker
Parker hydraulic power unit pump, Model H-Pak, Tank, HP 3, 230/460 Volts, 1170 RPM, 3-phase, 60 Hz, 20 gallons, pump flow 1.6 gallons per minute, maximum pressure 5000 PSI; minimum pressure 1420 PSI. Serial number 71460 01 FN., HP: 3, Basis: FOB.
Machinery & Equipment Co has 5 more
listings in Hydraulic Pumps.
Cemline #V60SSH1442, Clean Steam Boiler, Stainless Steel, 24" W x 8' L, 15-20 psi, qty. 2, 2011
Category: Hydronic Boilers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Chemline
Model: V60SSH1442
Year: 2011
(2) Cemline steam heated semi-instantaneous packaged hot water heater with 316L stainless steel contact parts. Unit designed to utilize 15-20 PSI steam to flash heat clean sanitary water. Unit s 60 gallon reservoir tank and automated controls for steam inlet control. System is rated for heating water at 24" wide x ...more
.25 Ton Manitowoc #C6105-BIN, Ice Maker, 500 lb., R-22, Water Cooled, 45" x 26" x 28" bin, 230V
Category: Ice Making Machines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Manitowoc
Model: C6105-BIN
Manitowoc ice making machine with 500-pound capacity per day, unit has water cooled condensor model C6105-BIN, serial number 82074028. Storage bin measures 45" x 26" x 28", is 230 volt single phase and runs on R22 refrigerant., Capacity: 500 lbs., Type: Ice Maker, Dimensions: 45" x 26" x 28", Basis: FOB.
Industrial Food Auger Feeder Systems
3 Results
Stainless Steel Fabrication Company Steel Fabrication Company #700, Dual-Auger Feeder w/Hopper, 30" x 30" x 20" deep hopper, (2) 7" diameter x 32" L screws, 5" diameter x 30" L discharge hopper
Category: Industrial Food Auger Feeder Systems
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Stainless Steel Fabrication Company
Model: 700
Stainless Fabrication Company Model 700 Dual-Auger Feeder with Hopper, serial number 771. Includes 30" x 30" x 20" deep hopper with sloped sides, to dual screw section including 7" diameter X 32" long overlapping screws. Screws feed product to 5" diameter x 30" long discharge hopper with (2) 5-1/4" diameter tri-clamp ...more
Machinery & Equipment Co has 2 more
listings in Industrial Food Auger Feeder Systems.
Industrial Food Cutters and Slicers
49 Results
Bakers Aid #GMB-1/2, Bread Slicer, 16" width, 33" feed section, 30 Blades, 1/2" Slice, 115 V, 7.5 Amp, 1/2 HP
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bakers Aid
Model: GMB 1/2
Bread slicer, manufactured by Bakers Aid, Model GMB 1/2, with 16" wide slicing area, with 33" long feed section, 30 serrated blades with 1/2" spacing. Unit is mobile is casters. Mild steel frame with all stainless steel contact parts. Single phase, 115 V, 60 Hz, 7.5 amp, 1/2 HP motor. Serial number 9214-1326-01292. ...more
Machinery & Equipment Co has 48 more
listings in Industrial Food Cutters and Slicers.
Industrial Food Separators and Sifters
13 Results
CMP, declumping rotary tumbler separator, Stainless Steel, 2 HP, 50" x 24" x 26" H hopper
Category: Industrial Food Separators and Sifters
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Cmp
CMP Declumping Rotary Tumbler Separator, s a hopper inlet measuring 50" x 24" x 26" high, feeding into a 12" diameter x 72" long paddle infeed. After paddle section, the separator includes a screening section, measuring 16" diameter x 63" long, with a discharge height of 40". It is driven by a 2 HP motor, operating at ...more
Machinery & Equipment Co has 12 more
listings in Industrial Food Separators and Sifters.
Kuka, KR-150, Industrial Robot, 6-Axes, 150 kg Payload, 1245 kg Robot, 106.3" H-Reach, qty. 2, 2002
Category: Industrial Robots
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kuka
Model: KR-150
Year: 2002
(2) Kuka Model KR150 Industrial Robot, Model number KR150L150SP/2, Heavy Duty High Payload Industrial Robot Arm. 6-axes, Payload 150kg (330.69 pounds), H-Reach 2700mm (106.3 inches), Repeatability 0.12mm (0 inches), Robot Mass 1245kg (2744.73 pounds). Serial Number 7838067. New in 2002. Drawing number 394006. Includes ...more
Inline Mixers and Blenders
2 Results
Bematek #LZ-250, sanitary dynamic inline high-shear mixer is a compact & versatile mixing solution, 2021
Category: Inline Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bematek
Model: LZ-250
Year: 2021
Bematek LZ-250/Sanitary Dynamic In-Line High-Shear Mixer is a compact and versatile mixing solution designed for sanitary applications. Made from high-quality stainless steel, it ensures product purity and easy cleaning. With its powerful motor and rotor-stator technology, it delivers intense hydraulic shear forces ...more
Machinery & Equipment Co has 1 more
listing in Inline Mixers and Blenders.
Ceia #EMS 130x200, Nonmetal X-Ray Cargo Inspection, used at local airport, 51" x 79" detection box, automatic belt conveyor
Category: Inspection Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ceia
Model: EMS 130X200
Ceia Model EMIS 130x200 nonmetal X-Ray cargo inspection system previously used at local airport. Cargo is passed through 130 cm X 200 cm (51" x 79") detection box on automatic belt conveyor. EMIS 130x200 Large Bore Electro Magnetic inspection scanner. In good working condition when removed from service., Basis: FOB ...more
Machinery & Equipment Co has 5 more
listings in Inspection Equipment.
Airco #KF20-350S, Spiral Freezer, 10-Tier, 4000 lbs./hr., 4.5" clearance
Category: IQF Spiral Freezers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Airco
Model: KF20-350S
Airco KF20-350S Spiral Freezer, 1,500 - 4,000 pounds per hour, 4.50" clearance, 10-Tier., Capacity: 1,500 - 4,000 pounds per hour, Basis: As Is, Where Is, Number of Tiers: 10.
Machinery & Equipment Co has 1 more
listing in IQF Spiral Freezers.
Praxair Inc, Freeze Tunnel, Stainless Steel, 34" width x 130" L tunnel, 39" H feed, 33" H discharge, 1997
Category: IQF Tunnel Freezers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Praxair
Year: 1997
Praxair Freeze Tunnel. Tunnel measures 34" wide X 130" long with 7" clearance between belt and roof, 316 stainless steel wire mesh belt. Unit has 39" feed height and 33" discharge height. Includes controls for Conveyor, Cryogenic System, and Exhaust. New in 1997. Previously used in food operation. Serial number ...more
U.S. Stoneware #755 RMV, Jar Mill, bench type, one-tier, 13" roller, 2.5"-4"/4"-7"/7"-10" diameter Adjustment positions, 1/4 HP, 1140 RPM, 115 V
Category: Jar Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: U.S. Stoneware
Model: 755 RMV
US Stoneware Jar Mill, Model 755 RMV, One-tier high-capacity, bench type. Includes 13" roller, 1/4 HP, 115V, single phase, 60Hz, 1140 RPM motor. Loading Max Weight Per Tier 60 pounds. With 3 adjustment positions for jar sizes diameter 2-1/2" to 4", 4" to 7", and 7" to 10". Serial number CV-87308., HP: 0.25, Diameter: ...more
Machinery & Equipment Co has 3 more
listings in Jar Mills.
42" x 36" Traylor #Type HB, Jaw Crusher, double toggle, 5" closed side, 1" swing jaw, 125 HP
Category: Jaw Crushers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Traylor
Model: TYPE HB
Jaw crusher, 36" x 42" jaws, manufactured by Traylor, Type HB, double toggle, driven by 125 HP motor, 5" closed side, crusher stroke, swing jaw 1". Includes automatic lube system., HP: 125, Measurements: 36" x 42", Materials of Construction: Carbon Steel, Basis: As Is, Where Is, Width: 36.
Machinery & Equipment Co has 5 more
listings in Jaw Crushers.
Buon Olio Top by Campagnola Oil Press, designed for small-scale olive oil production, 2009
Category: Juice Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Buon Olio Top
Year: 2009
Used Buon Olio Top by Campagnola Oil Press, designed for small-scale olive oil production, capable of processing up to 175 lbs. (80 kg) of olives per hour, constructed of stainless steel. Manufactured in 2009, only 188 hours of use. It s an auger feeder that directs olives into the press, where the grinding, kneading ...more
Machinery & Equipment Co has 1 more
listing in Juice Presses.
Kettles (Food Based)
72 Results
5 gallon Cleveland #KET-5-T, Electrically Heated Kettle, tilt type, Stainless Steel, 13" diameter x 11" deep Bowl, 50 psi @ 298°F jacket
Category: Kettles (Food Based)
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cleveland
Model: KET-5-T
Electrically heated Kettle, 5 gallon capacity, manufactured by Cleveland, Model Number KET-5-T, tilt-type, stainless steel construction Unit is self contained. Bowl measures 13" diameter x 11" deep. Complete with pressure gauge and electronic temperature control. Jacket rated for 50 PSI @ 298 deg. F. Includes tilt ...more
Machinery & Equipment Co has 71 more
listings in Kettles (Food Based).
5.6" x 32-1/2' " Maxon #400, Rotary Kiln, 7' Long Screw Feeder
Category: Kilns
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Rotary Kiln, 5-1/2' diameter X 32 1/2 feet long shell. Product is fed by 7' long screw feeder and discharge is controlled by a Rotary Air Lock valve. Includes drum drive with motor and gear reducer. a Maxon Oven-Pak II Model 400 Size 445 Gas Burner (Estimated 4-6MM BTU/hr), direct-fired system. The equipment s ...more
Machinery & Equipment Co has 3 more
listings in Kilns.
International Centrifuge #EXD, Lab Centrifuge, 23" diameter x 15" H bowl, (6) 2.5" diameter x 4.5" H cups per tubes, 3/4 HP, 5200 RPM, 115 V
Category: Lab Centrifuges
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: International Centrifuge
Model: EXD
International Centrifuge, Model EXD, floor-model, bowl measures 23" diameter X 15" high. Capacity of 6 cups per tubes, measuring 2-1/2" diameter x 4-1/2" high. Offered with 3/4 HP explosion proof motor, rated for 115 Volts, single phase, 60 Hz. Includes variable speed control, can be set up to 5200 RPM. Serial number ...more
Machinery & Equipment Co has 1 more
listing in Lab Centrifuges.
Lab Freezers
7 Results
Baxter Scientific #SSU1786ABA, Cryo Fridge, (5) 23" width x 24" D x 10" T compartment, (4) shelves per compartment, 115 V, on wheels
Category: Lab Freezers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Baxter Scientific
Model: SSU1786ABA
Lab, Baxter Scientific Products cryo fridge, Model SSU1786ABA. Unit complete with two compressors, 115 volt, single phase, 15.2 amps. Unit is 5 compartment, 4 shelves per compartment, stainless steel shelves. Compartments measures 23"w x 24"d x 10" t each. Unit is on wheels, last used on plasma. Serial number ...more
Machinery & Equipment Co has 6 more
listings in Lab Freezers.
Fisher Biotech #FBH110, Hybridization Rotating Incubator, 4.17 Amps, 120 V
Category: Lab Incubators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fisher Biotech
Model: FBH110
Fisher biotech hybridization rotating incubator. Unit is model FBH110, Serial number 0301-0240.120V, 4.17 amp. Complete with controls., Basis: FOB.
Machinery & Equipment Co has 10 more
listings in Lab Incubators.
Whip-Mix Dental Lab #C, Power Mixer w/Vacuum,.33 HP, 115 V, 425 RPM, ideal for 5-1000 grams of plaster
Category: Lab Mixers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Whip-Mix Dental Lab
Model: C
Whip-Mix Dental Lab Power Mixer with Vacuum Model C, single drive speed of 425 RPM. Ideal for mixing quantities from 5 gram to 1,000 grams of plaster, 1/3 HP, 115V, 50-60 Hz, single phase motor; bowl not included., HP: 0.33, Output RPM: 425, Voltage: 115, Basis: FOB.
Blue M, General Purpose Circulating Water Bath, 100.7 liters, 36" L x 18" width x 9.5" deep interior, 208/240 V, qty. 3
Category: Lab Water Baths
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Blue M
(3) Lindberg/Blue M -Purpose Circulating Water Bath 100.7 Liters (26.6 Gallons), Interior 36" Long x 18" Wide x 9.5" Deep, Electrical Requirements: 208/240 V 50/60 Hz, 10.5A., Basis: Each, FOB.
Machinery & Equipment Co has 6 more
listings in Lab Water Baths.
Accent Packaging #40PL, labeler, pressure sensitive, pouches, 2016
Category: Labeling Machines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Accent Packaging
Model: 40PL
Year: 2016
Accent Packaging Equipment Corp. labeler, model 40PL, was previously used for applying front and back labels on 1/2 lb and 1 lb herb pouches. Suitable for a variety of labeling applications., Type: ALS204, Basis: As Is, Where Is.
Machinery & Equipment Co has 68 more
listings in Labeling Machines.
12" x 12" x 13" Precision #26, Convection Oven, 0-225 deg. C, 120 V, 9.9 Amps
Category: Laboratory Type Ovens
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Precision
Model: 26 CONVECTION OVEN
GCA/Precision Scientific Model 26 Oven, chamber measures 12" x 12" x 13" deep. Rated for 120 Volts, single phase, 9.9 AMPS, Catalog number 31540, Serial number 21-AF-5, Temperature : 0 to 225 degrees Celsius., Basis: FOB.
Machinery & Equipment Co has 4 more
listings in Laboratory Type Ovens.
FMI #QSYX-1, Lap Pump, Stainless Steel, 1/4" piston diameter, 0 to 23 ml/min, 10-100 PSIG
Category: Lap Pulsafeeder Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fmi
Model: QSYX 1
FMI Lab pump, Model QSYX 1, stainless steel with Superior Electric Synchronous Stepping Motor, Explosion Proof Type X250, 1/4" piston diameter, flow range 0 to 23.0 ml per minute, 10 to 100 PSIG, Basis: FOB, Inlet and Outlet: 0.25" Inlet and 0.25" Outlet, Contact Parts: Stainless Steel.
Machinery & Equipment Co has 5 more
listings in Lap Pulsafeeder Pumps.
Leaflet Feeder Machines
3 Results
Longford #B700W12, Leaflet Feeder, 300 pcs/min., 5" width x 34" L shingling conveyor, 12" width x 25" L feeder, 2" x 3" min to 11" x 11" max leaflets, qty. 2
Category: Leaflet Feeder Machines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Longford
Model: B700W12
(2) Longford Leaflet feeder, model B700W12 Series inserter with shingling conveyor measuring 5" wide x 34" long. Feeder dims are 12" wide x 25" long on adjustable stand. Unit has capacity of up to 300 pcs/min, has min of 2" x 3" up to max of 11" x 11" leaflets. Includes Vision System RVSI Cimatrix Visionscape. Unit is ...more
Machinery & Equipment Co has 2 more
listings in Leaflet Feeder Machines.
Lift Tables
1 Result
1100 lb. Dandy Southworth #M500L, Mobile Lift Solid Platform, 20" x 38", 29.5" raised height, 3.5" lowered, qty. 2
Category: Lift Tables
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Dandy
(2) Dandy Southworth M-500L mobile dandy lift solid platform, 20" x 38" with 1100 pounds capacity. Raised height is 29-1/2", lowered is 3-1/2"., Basis: Each, FOB.
Liquefier Mixers and Blenders for Food
1 Result
Waring #38BL19, Stainless Steel heavy duty liquidifier, 4 speed, Stainless Steel carafe
Category: Liquefier Mixers and Blenders for Food
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Waring
Model: 38BL19
Waring heavy duty liquifier, Model 38BL19, s 4-speed and stainless steel carafe., Materials of Construction: Stainless Steel, Basis: FOB.
Lump Breakers
2 Results
Munson #SCC-15-MS, Screen Classifying Cutter, 15 HP, 3/60 Hz
Category: Lump Breakers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Munson
Model: SCC-15-MS
Munson Model SCC-15-MS Screen Classifying Cutter, includes 15" long X 11" diameter rotor, driven by 20 HP motor, rated for 230/460V, 3/60Hz. The cutter's 11 in. (279 mm) wide infeed throat houses a 10.5 in. (267 mm) diameter solid-mass rotor comprised of "interconnected parallelograms" each of which holds two ...more
Machinery & Equipment Co has 1 more
listing in Lump Breakers.
Magnetic Separators for Mining and Construction
2 Results
Eriez #CF-1005, Magnetic Separator, 49" diameter Ring, 8000 gauss, 32 kW, 5 HP, 1988
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Eriez
Year: 1988
Eriez magnetic separator, WHIMS Model CF-1005. Used for six month only on industrial minerals. All skid mounted with controls and electricals rated at 8,000 gauss, 32 kW 49" diameter ring, variable speed drive with 5 HP motor. New in 1988., Basis: As Is, Where Is.
Machinery & Equipment Co has 1 more
listing in Magnetic Separators for Mining and Construction.
Material Handling Equipment
13 Results
Aluminum Drum Dolly, 4-wheel, sliding chime hook, for 15/30/55 gallon drums
Category: Material Handling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Aluminum drum dolly, 4-wheel, complete with sliding chime hook. Unit can be used for 15, 30 and 55-gallon drums, Basis: FOB.
Machinery & Equipment Co has 12 more
listings in Material Handling Equipment.
Material Lifts - (Drum, Pallet, Vacuum)
6 Results
125 lb. Siemans #160Max, Vacuum Case Lifter, 12" diameter Hose
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Siemans
Model: 160MAX
Siemans vacuum case lifter. Unit has 12" diameter hose for 125 pound capacity lift, includes rails is Model 160max; has release lever., Diameter: 12", Capacity: 125 pounds, Basis: FOB.
Machinery & Equipment Co has 5 more
listings in Material Lifts - (Drum, Pallet, Vacuum).
Wolf-Tec #N306, Brine Needle Injector, 24" width feed w/(16) bottom rows, 77" L table/conveyor, two sections w/(5) rows of (26) needles per row, 16/19 kW, 60 psi air pressure, 2000
Category: Meat Injectors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Wolf-Tec
Year: 2000
Wolf-Tec Brine Needle Injector, Type N306, serial number 269. Feed measures 24" wide with (16) bottom rows on 1-1/2" spacing, approximately 7" high clearance, 77"overall length of table/conveyor. Needle injector portion Includes two sections with (5) rows of approximately (26) needles per row. Rated for 16/19 kW ...more
Machinery & Equipment Co has 3 more
listings in Meat Injectors.
Chicago Boiler #Red Head-3-P, Vertical Grinding Mill, 8" diameter x 24" H jacketed Chamber, 8-45 GPH, 10" top screening section, 10 HP mill, 1/4 HP pump, 230/460 V
Category: Media Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Chicago Boiler
Model: RED HEAD 3-P
Chicago Boiler "Red Head" Model 3-P vertical grinding mill, serial number 72-E-1252-13, 8" diameter X 24" high jacketed chamber, including 10" top screening section with small discharge chute. Mill is driven by approximately 10 HP motor. Also includes back mounted gear pump, 1-1/2" in/out, driven by 1/4 HP, 230/460 ...more
Machinery & Equipment Co has 6 more
listings in Media Mills.
Anritsu #KD7405AW, X-Ray Metal Detector, 5 kg max product weight, 240 mm width x 120 mm H product size, 120 V, 2006
Category: Metal Detectors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Anritsu
Model: KD7405AW
Year: 2006
Anritsu Model KD7405AW X-Ray Metal Detector. Max product weight 5Kg (60/m/min). Max product size: 240mm (width) x 120MM (height). Temperature 0 to 35 degrees C. Serial# 4600035207. Packaged products are fed by belt conveyor through detector that radiates an x-ray beam through products to detect any contaminants. ...more
Machinery & Equipment Co has 17 more
listings in Metal Detectors.
Bran & Luebbe #EFR113A73, metering pump, dual-pump, Stainless Steel, 1/2 HP
Category: Metering Pumps
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bran & Luebbe
Model: EFR113A73
Bran & Lubbe dual pump metering skid, Type N-P32, stainless steel construction, machine number A73915. Mounted on portable cart with controls. Set up with 1" diameter inlet/outlet with tri-clamp connections. Both pumps are driven by Reliance 1/2 HP, 115/230V, 60Hz, 1-phase motor Last used at food processing ...more
Machinery & Equipment Co has 5 more
listings in Metering Pumps.
Folkman, Inc. Mezzanine, 6" x 6" columns, 12 x 12 base Plates w/anchor holes, 1/8 Deckplate sheathing, access stairway
Category: Mezzanine Flooring
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Folkman
Stationary stainless steel Work Platform, 96" long x 48" wide x 65" high, stands on six 2" square tubing legs with diamond plate deck, all stainless. Unit includes 6-step stairwell with 20" wide x 12" deep plastic treads and includes railing around platform. Stairwell used to be welded to platform, removed for ...more
Anderson, Manual Grinder Mill, 5" diameter x 5" L grinding chamber, 21" x 21" x 18" hopper, 7/8" discharge
Category: Mills
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Anderson
Anderson manual grinder mill, bronze and stainless steel contact parts, grinding chamber measures 5" diameter x 5" long, has stainless steel hopper measuring 21" x 21" x 18" with 7/8" discharge. Unit is on carbon steel stand., Basis: FOB.
Machinery & Equipment Co has 16 more
listings in Mills.
Mineral Separators
2 Results
36" x 120" Eriez magnetic separator, Stainless Steel, drum (2 available)
Category: Mineral Separators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Eriez
Year: 1980
Eriez magnetic separator, 36" diameter x 120" long, stainless steel, dry drum type. Never used. Permanent magnets, style 7119, Serial number 55306. Tested with good strength. Drum is fed with Eriez vibratory feeder, model 80B, 120" wide with three vibrators, stand and controller. Rated at 50 to 120 tons per hour ...more
Machinery & Equipment Co has 1 more
listing in Mineral Separators.
Misc. Laboratory and Research Equipment
11 Results
Brandel #MB-487, Bio Medical Cell Harvester, 115 V, S/N 22057, qty. 2
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Brandel
Model: BRANDEL #MB-487
(2) Brandel bio medical cell harvester, Model MB-487, Serial number 22057., Basis: Each, FOB.
Machinery & Equipment Co has 10 more
listings in Misc. Laboratory and Research Equipment.
Blue Air #BGM48L, Merchandiser Refrigerator, 48' cu.ft. capacity, 48" L x 51" H x 24" deep, 5800 BTU, (4) shelves for each compartment, 1/2 HP, 3450 RPM, 110 V
Category: Misc. Refrigeration Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Blue Air
Model: BGM48L
Blue Air Refrigerator, Merchandiser, Model BGM48L, interior dimensions measure 48" long x 51" high, 24" deep, 48 cubic feet capacity. s sliding glass door, (4) shelves for each compartment. Rated for 5,800 BTU, driven by 1/2 HP, 110 Volts, 60 Hz, single phase, 3450 RPM motor., Type: Merchandiser, Dimensions: 48" x 24" ...more
Machinery & Equipment Co has 6 more
listings in Misc. Refrigeration Equipment.
Ryson, Spiral Case Conveyor, Spiral Case Conveyor, 5' 9" diameter Spiral w/(5) turns, 16" width x 6" H sidewalls belt, 160 FPM, 3' 2" H infeed, 14' 9" H outfeed, 2008
Category: Miscellaneous Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ryson
Year: 2008
Spiral case conveyor, manufactured by Ryson, type 1300-400-A1. Spiral measures 5'9" diameter with five (5) turns, Belt measures 16" wide with 6" high sidewalls. Direction is Up, clockwise, rated for 160 FPM, infeed is at 3'2" high, outfeed is 14'9" high. Previously used at major wine processing and ...more
Machinery & Equipment Co has 1 more
listing in Miscellaneous Conveyors.
Miscellaneous Feeders
2 Results
APV Crepaco #S430, Fruit Feeder, Stainless Steel, 16" x 17" x 16" deep hopper, 4" diameter x 20" L bottom auger, 1.5" diameter Agitator shaft w/ (4) 1/2" diameter Curved rods/paddles
Category: Miscellaneous Feeders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Apv Crepaco
Model: S430
APV Crepaco Model S430 Stainless Steel Fruit Feeder, Serial number N-0232. Includes 16" x 17" x 16" deep stainless steel hopper. Hopper includes 1-1/2" diameter agitator shaft with (4) 1/2" diameter curved rods/paddles, mounted above 4" diameter X 20" long bottom auger with 13/16" spacing between flights, discharging ...more
Machinery & Equipment Co has 1 more
listing in Miscellaneous Feeders.
Miscellaneous Filters
4 Results
Frewitt #Profi-Clean-90, 316 Stainless Steel, de-dusting & filtering device w/automatic blow back system
Category: Miscellaneous Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Frewitt
Model: PROFI-CLEAN 90
Year: 2019
Frewitt Profi-Clean 90 de-dusting and filtering device with automatic blow-back system. Designed for filtering and separating powder particles from extracted air. The de-dusting filter is cleaned automatically by pressure impulses and returns the powder back into the product stream. Includes pneumatic control system ...more
Machinery & Equipment Co has 3 more
listings in Miscellaneous Filters.
Miscellaneous Food Processing Equipment
34 Results
650 Gallon pot still, Carter Raff Still Works, condensor, 5' dia. x 4' straight side, dome top & bottom, 2011
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Year: 2011
650 Gallon Pot Still with Condenser, vessel measures 5' diameter x 48" high straight side, with dome top and bottom, 20" x 16" manway, sight glass, multiple side ports, 12" center bottom discharge leading to 2" outlet. Complete with 16" diameter x 20" high condenser column. Unit is steam heated. Mounted on mild ...more
Machinery & Equipment Co has 33 more
listings in Miscellaneous Food Processing Equipment.
Miscellaneous Furnaces, Ovens and Parts
3 Results
Firebox, Peabody Gordon/Piatt #14-G0-50.4, 36" W x 144" L, 10mm BTU/hr, gas/oil, 5 HP 440V.
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Peabody
Model: FIREBOX
Peabody Gordon/Piatt Furnace, gas/oil burner, model 14-G0-50. 4, combination gas or oil fired, unit rated for 10,000 MBH on natural gas or 71.4 GPH on #2 oil. Unit complete with gas manifold and gas inlet, approx. 5 HP 440 volt blower fan, 1.5 HP oil pump, and 120 volt control system. Unit is complete with 36 diameter ...more
Machinery & Equipment Co has 2 more
listings in Miscellaneous Furnaces, Ovens and Parts.
Miscellaneous Mixers and Blenders
6 Results
Chem Chang, Mixer, rubber type, Carbon Steel, 6" diameter Feed opening, 125 HP, 1170 RPM, 220 V, 1984
Category: Miscellaneous Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Chem Chang
Year: 1984
Mixer, Chem Chang, rubber type, carbon steel. Unit complete with hydraulic feed ram, 6" diameter feed opening with pneumatic valve, side manway, hydraulic ram drives discharge opening. Unit is 125 HP, 220V, 1170 RPM thru heavy duty gearbox. New in 1984, Serial number BM-35-4., HP: 125, Measurements: 6" Diameter feed ...more
Machinery & Equipment Co has 5 more
listings in Miscellaneous Mixers and Blenders.
Miscellaneous Packaging Equipment
6 Results
Keyence #CV-551, Barcode Reader w/camera & stand
Category: Miscellaneous Packaging Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Model: KEYENCE #CV-551
Keyence barcode reader model CV-551. Manufactured as a series CV-500 interface Vision Display includes a camera and stand., Basis: FOB.
Machinery & Equipment Co has 5 more
listings in Miscellaneous Packaging Equipment.
Allen-Bradley #PowerFlex4, Stainless Steel Electrical Panel, 1.5 HP, 480 V
Category: Motor Control Centers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Allen-Bradley
Model: S/S ELECTRICAL PANEL
Unused stainless steel electrical panel for 1.5 HP, 480 Volt, 3-phase with Allen Bradley PowerFlex4 adjustable frequency drive., HP: 1.5, Materials of Construction: Stainless Steel, Basis: FOB.
Machinery & Equipment Co has 1 more
listing in Motor Control Centers.
Natural Gas Engines
1 Result
Kem Equipment #877-Angelus & GMG-874CPU-A, 5.7 liter LPG/CNG industrial engines, V8 (2 available)
Category: Natural Gas Engines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kem
Model: 877-ANGELUS
(2) Industrial engine manufactured by Kem Equipment, models 877 Angelus and GMG-874CPU-A. Units are 5.7 liter mobile LPG/CNG, V8, with twin disc clutch to pack. Unitized on carbon steel frame. Serial numbers 5786082798 and 53178032498., Basis: Each, FOB.
Nauta Mixers and Blenders
6 Results
3 cu.ft. NautaMix, Nauta Mixer, Mild Steel, 24" diameter x 36" cone H, 16" x 15.5" infeed, 1 HP, 208-230/460V, 1150 RPM
Category: Nauta Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Nautamix
Nauta Mixer, 25-gallon Working Capacity (approximately 3 cubic feet), mild steel construction, non-jacketed. Cone measures approximately 24" diameter x 36" cone height. Hopper infeed 16" x 15-1/2" with 3-1/2" x 15-1/2" inlet, 4" center bottom outlet. Internal screws measures 6" diameter x 20" long, stainless steel ...more
Machinery & Equipment Co has 5 more
listings in Nauta Mixers and Blenders.
Neck Banders and Cappers
45 Results
Accutek #AccuCapper BT, Semi-Automatic Benchtop Chuck Capper, 30 CPM, 22-90 mm Capacity, 45"-145" torque, 12" adjustable height
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Accutek
Model: ACCUCAPPER BT
Accutek Model AccuCapper BT Semi-Automatic Benchtop chuck capper, 304 stainless steel/Aluminum construction. Includes pneumatically operated drive. Includes Foot pedal for operation. Previously running 40 mm caps., Manufacturer :, - Speed: 30 CPM, - Cap sizes: 22mm to 90mm, - Cap types: screw and lug configuration, - ...more
Machinery & Equipment Co has 44 more
listings in Neck Banders and Cappers.
Nutsche Filters
5 Results
Louis Allis Boiler Works, Stainless Steel Nutsche Vacuum Bed Filter, 36" diameter x 28" tall top feed section, 36" diameter x 24" lower section, 2" center bottom outlet 2" side top outlet
Category: Nutsche Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: La Boiler Works
Stainless steel Nutsche vacuum bed filter, 36" diameter Top feed section of filter measures 36" diameter x 28" tall and is open top. Unit s 36" diameter x 24" lower section, complete with dished bottom and 2" center bottom outlet, 2" side top outlet for vacuum. Unit manufactured by L.A. Boiler Works., Diameter: 36" ...more
Machinery & Equipment Co has 4 more
listings in Nutsche Filters.
Oil/Water Separators
1 Result
Alfa-Laval #UVPX507-507-AGT-14, oil separator for food grade oil, bowl rated for 6400 RPM, Complete with digital controller
Category: Oil/Water Separators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Alfa-Laval
Model: UVPX507-507-AGT-14
Alfa Laval Model UVPX507 507 AGT 14 oil separator for food grade oil, bowl rated for 6400 RPM, Complete with digital controller and main stainless electrical box with speed readout and emergency stop. Pipe feeds to perforated basket at infeed, 4" diameter solids discharge, (2) 3" wide x 2" high liquid discharges. ...more
Ozone Generators
3 Results
ABB, Ozone generator, 333 lbs/day, Stainless Steel, flanged dished ends
Category: Ozone Generators
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Abb
ABB Ozone Generator consisting of stainless steel ozone generator vessel (OGV) and power supply unit (PSU), type OF 209 L. Rated for 333 pounds per day, 17 PSI ozone gas pressure, 13,320 pounds per day corresponding mass flow, 84 gallons per minute, 8.5 kWh per pound power consumption. OGV includes flanged dished ends ...more
Machinery & Equipment Co has 2 more
listings in Ozone Generators.
Packaging Checkweighers
7 Results
Garvens #SL-3PM, Self-Acting Checkweigher, 3.3 lb., 8" width x 48" L conveyor, 220 V, 1998
Category: Packaging Checkweighers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Garvens
Model: SL-3PM
Year: 1998
Garvens Model SL 3 PM Self-acting checkweigher, serial number 4225. Maximum product weight: 1,500 grams, or 3.30 pounds; includes conveyor measuring 8" wide x 48" long. Complete with reject system by pneumatic arm, new in 1998, voltage: 220 volts, and frequency: 60 Hz., Basis: FOB.
Machinery & Equipment Co has 6 more
listings in Packaging Checkweighers.
Kaps-All #AU-4, compact unscrambler, fully automatic unscrambler, serial #9183
Category: Packaging Unscramblers
Seller: Machinery & Equipment Co
Location: Los Angeles, CA
Mfr: Kaps-All
Model: AU-4
Kaps All AU-4 Compact Unscrambler, Model AU-4, fully automatic unscrambler, Serial number 9183.The AU-4 can handle containers ranging from 1/2 inch to 6 inches tall and up to 3 inches wide, including plastic, metal, and corrugated styles. Previously used in a cosmetics manufacturing facility., Previous Use: Cosmetics ...more
Paddle Finishers (Pulpers)
6 Results
Brown #100, pulper/finisher, stainless steel paddle type, 220/440 V., can do pulped or citrus juice
Category: Paddle Finishers (Pulpers)
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Brown
Model: 100
Brown pulper/finisher, model 100, stainless steel paddle type. Unit is complete with 2 HP 220/440 volt. Unit designed as medium sized for operation on tomatoes, pears, apples, plums berries, prunes, can be pulped or citrus juice, jams, soups jellies and fruit nectars can be finished. Unit has all stainless steel ...more
Machinery & Equipment Co has 5 more
listings in Paddle Finishers (Pulpers).
Paddle Mixers and Blenders
10 Results
10 cu.ft. Paddle Mixer, Carbon Steel, 24" width x 36" L x 32" deep Trough, 4" diameter Bottom center outlet, (4) paddles, 10 HP, 36/1755 RPM, 230/460 V
Category: Paddle Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Paddle mixer, approximately 10 cubic feet capacity, all carbon steel construction. Trough measures 24" wide X 36" long X 32" deep, with 4" diameter bottom center outlet. Paddles (4) are bolted to common shaft and driven by 10 HP direct connect motor, 230/460 V, 1755 RPM, 3-phase, 60 Hz, ratio 47.67, final output 36 ...more
Machinery & Equipment Co has 9 more
listings in Paddle Mixers and Blenders.
Paddle Mixers and Blenders for Food
8 Results
5 cu.ft. Hollymatic #GMG-180-A, Mixer/Grinder, Stainless Steel, 20" x 24" x 26" deep Chamber, 6" x 7" center bottom discharge, 5" diameter Pipe, (3) mixing arms, 10 HP, 200 V, 2013
Category: Paddle Mixers and Blenders for Food
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hollymatic
Year: 2013
Hollymatic Mixer/Grinder, Model GMG 180 A, driven by 10 HP, 3-phase, 200 V motor. Stainless steel construction, with 20" x 24" x 26" deep chamber (5 CF), stainless steel mixing blades, mild steel discharge screw, mounted on legs with casters. (3) mixing arms on common shaft. 6" X 7" center bottom discharge, leading to ...more
Machinery & Equipment Co has 7 more
listings in Paddle Mixers and Blenders for Food.
Paint and Powder Accessories
1 Result