1 - 50 of 293 listings
Featured
Bulk Bag Supersack Unloader, Best #BBU-4000-BE-IH, bulk equip, 2 ton Harrington electric hoist, pendant Control, bag hanger, (2 available)
Rider Opportunity Group | Miami, FL
Category: Material Handling Equipment
Seller: Rider Opportunity Group
Location: Allentown, PA
Mfr: Best
Model: BBU-4000-BE-IH
B.E.S.T Bulk Equip ( BPS OH ) Bulk Bag Supersack Unloaders 2 Systems Available, Model: BBU-4000-BE-IH SN: 040726-B, 2 Ton ( 4000 lb ) Harrington Electric Hoist - Pendant Control, Bag Hanger, Stand is bolted together in 2 sections Dimensions: 40" Wide 67" Deep 20' 6" Tall, Dump hopper with B.E.S.T Vibrators ( ...more
Featured
custom fabricated stackable panel storage and hand, 115" x 54.5" x 25.25", 4300 lb. capacity
TekModo OZ Holdings LLC | Three Rivers, MI
Category: Material Handling Equipment
Seller: TekModo OZ Holdings LLC
Location: Three Rivers, MI
Mfr: Custom
Model: STACKABLE PANEL STORAGE AND HANDLING RACK
Heavy-duty welded steel rack for flat panel storage, staging and forklift handling. Approximately 115 × 54.5 × 25.25 inches overall, with reinforced end frames, adjustable panel retainers, six longitudinal fork/support tubes, smooth upper contact surfaces and corner stacking posts. Smooth black ...more
Featured
MRL Elevators, Kone #MonoSpace-300, 2500 lb. capacity, 4-stop, never installed (2 available)
1st Metropolitan Builders | Gary, IN
Category: Material Handling Equipment
Seller: 1st Metropolitan Builders
Location: Munster, IN
Mfr: Kone
Model: MONOSPACE-300
Year: 2022
Brand-New KONE MonoSpace 300 MRL Elevators - Never Installed, Two (2) brand-new KONE MonoSpace 300 Machine-Room-Less (MRL) Traction Elevators, purchased for a 4-story commercial project but never installed. These units are in pristine condition, fully crated, stored indoors, and ready for immediate pickup., The only ...more
Featured
Re-usable tri-wall shipping & storage crates, Pallet Pack, 57" x 48" x 48" crate, 3000 lb. capacity, interlocking plastic pallet & lid
Sierra Equipment | Hayward, CA
Category: Material Handling Equipment
Seller: Sierra Equipment
Location: Hayward, CA
Mfr: Pallet Pack
Extra Large reusable Sleeve packs, shipping and storage boxes 57" x 48"x 45" with 4 way pallet and lid, Designed for shipping and storage of a wide variety of bulk materials and components, Interlocking triple wall (tri-wall) cardboard sides with high strength plastic 4 way pallet and interlocking lids, Inside usable ...more
#EPA 56C17F5326H, I-Beam Mounted Rollers, 2 Beams, 2 Rollers Per Beam
Savona Equipment | Savona, BC
Category: Material Handling Equipment
Seller: Savona Equipment
Location: Savona, BC
Model: EPA 56C17F5326H
I-Beam Mounted Rollers, 2 Beams 2 Rollers Per BeamBeam Length: 75inBeam Width: 30inRoller Width: 4inRoller Diameter: 7.5inRoller Height: 10in (From Beam)Roller Height: 31in (From Floor)With Guards, Drive: Electric Motor Make: Marathon ElectricModel: EPA 56C17F5326HPower: 0.75 HPRPM: 1800Voltage: 115/230 VoltPhase: ...more
1 Cubic Bond Feeder, Sleeper & Hartley #B-90-1175-2, serial #90-442
FL Sales Inc | Solon, OH
Category: Material Handling Equipment
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Sleeper & Hartley
Model: B-90-1175-2
Hartley model B-90-1175-2, 1 Cubic Bond Feeder, S/N 90-442.
1 Ton, Permadure #102, plate/part handling magnet system w/load beam, #66346
Yoder Machinery Sales | Holland, OH
Category: Material Handling Equipment
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Permadure
Model: 102
SERIAL. 000741, MODEL. 102, CAPACITY. 2,000 LBS, LOAD BEAM. 8', DESIGNED TO HANDLE PLATES. 4' X 8'TO 6' X 12, PLATE THICKNESS. 3/16" TO 1".
JUST ADDED!
1,000 lb. Taylor-Dunn #SC-100-24, Electric Stock Chaser Cart, 30" x 59" bed, 24 V., key, 2014
HGR24 | Euclid, OH
Category: Material Handling Equipment
Seller: HGR24
Location: Euclid, OH
Mfr: Taylor-Dunn
Model: SC-100-24
Year: 2014
30X59” BED, KEY INCLUDED.
JUST ADDED!
1,000 lb. Taylor-Dunn #SC-100-24, Electric Stock Chaser Cart, 30" x 59" bed, 24 V., key, 2012
HGR24 | Euclid, OH
Category: Material Handling Equipment
Seller: HGR24
Location: Euclid, OH
Mfr: Taylor-Dunn
Model: SC-100-24
Year: 2012
30X59” BED, KEY INCLUDED.
Get email updates for newly added Material Handling Equipment
Material Handling Equipment (also known as material handling systems or MHE) refers to a wide range of machines and devices used for the transportation, storage, and control of materials and products in various industries. Common types include conveyors, forklifts, pallet jacks, cranes, and hoists. Material handling equipment is essential for improving efficiency, reducing manual labor, and ensuring safe movement of goods in warehouses, manufacturing plants, and distribution centers.
JUST ADDED!
1,000 lb. Taylor-Dunn #SC1-00, Electric Stock Chaser Cart, 30" x 59" bed, 24 V., key
HGR24 | Euclid, OH
Category: Material Handling Equipment
Seller: HGR24
Location: Euclid, OH
Mfr: Taylor-Dunn
Model: SC1-00
30X59” BED, KEY INCLUDED.
JUST ADDED!
1,000 lb. Taylor-Dunn #SC1-00, Electric Stock Chaser Cart, 30" x 59" bed, 24 V., key, 2013
HGR24 | Euclid, OH
Category: Material Handling Equipment
Seller: HGR24
Location: Euclid, OH
Mfr: Taylor-Dunn
Model: SC1-00
Year: 2013
30X59” BED, KEY INCLUDED.
JUST ADDED!
1,200 lb. Pack Mule #SC-775-6CA, maintenance cart, 2,000 lb. tow capacity, 36 V., 48" x 31.5" deck, S/N SC10181422, 2012
Smith Machinery Co | Ames, IA
Category: Material Handling Equipment
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Pack Mule
Model: SC-775-6CA
Year: 2015
Manufacturer: Pack Mule / Wesley International Model: SC-775-6CA Year: 2015 (from your data plate) Voltage: 36V Serial: SC10181422 Load Capacity: 1,200 lbs Towing Capacity: 2,000 lbs Dimensions Length: 78 in. Width: 32 in. Height: 50 in. Turning Radius: 79 in. [ Power System 36V AC electric drive Brushless sealed AC ...more
JUST ADDED!
1,200 lb. Pack Mule #SC-775-6CA, electric stock chaser cart, 2,000 lb. tow capacity, 36 V., 79" turning radius, S/N SC282840, 2015
Smith Machinery Co | Ames, IA
Category: Material Handling Equipment
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Pack Mule
Model: SC-775-6CA
Year: 2015
Type Electric Stock Chaser / Utility Cart Power 36 horsepower Load Capacity 1200 pounds Towing Capacity 2000 pounds Length 78 inches Width 32 inches Height 50 inches Turning Radius 79 inches Passenger Capacity 1 standing operator Charger On-board automatic charger Drive Electric transaxle drive s Battery indicator ...more
JUST ADDED!
1,200 lb. Pack Mule #SC-775-6CA, electric stock chaser cart, 5,000 lb. tow capacity, 36 V., 48" x 31.5" deck, onboard charger, S/N SC10155, 2011
Smith Machinery Co | Ames, IA
Category: Material Handling Equipment
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Pack Mule
Model: SC-775-6CA
Year: 2014
Load Capacity 1200 pounds Tow Capacity 5000 pounds Length 78 inches Width 32 inches Height 50 inches Onboard Charger Yes, Manufacturer: Pack Mule (Wesley International) Model: SC-775-6CA Serial Number: SC10155 Year: 2014 Type: Electric Stock Chaser / Tow Vehicle Power: 36 Volt Battery System Operator Capacity: 1 ...more
JUST ADDED!
1,200 lb. Pack Mule #SC-775-6CA, electric stock chaser cart, 2,000 lb. tow capacity, 36 V., 48" x 31.5" deck, onboard charger, S/N SC135209, 2011
Smith Machinery Co | Ames, IA
Category: Material Handling Equipment
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Pack Mule
Model: SC-775-6CA
Year: 2015
Load Capacity 1200 pounds Tow Capacity 2000 pounds Length 78 inches Width 32 inches Height 50 inches Onboard Charger Yes, Manufacturer: Pack Mule (Wesley International) Model: SC-775-6CA Serial Number: SC135209 Year: 2015 Type: Electric Stock Chaser Power Source: 36V Battery System Operator Capacity: 1 Standing ...more
JUST ADDED!
1,200 lb. Pack Mule #SC-775-6NXG, electric stock chaser cart, 2,000 lb. tow capacity, 36 V., 48" x 31.5" deck, onboard charger, 2017
Smith Machinery Co | Ames, IA
Category: Material Handling Equipment
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Pack Mule
Model: SC-775-6NXG
Year: 2017
Load Capacity 1200 pounds Tow Capacity 2000 pounds Length 78 inches Width 32 inches Height 50 inches Onboard Charger Yes, Manufacturer: Pack Mule (Wesley International) Model: SC-775-6NXG Year: 2017 Type: Electric Stock Chaser / Utility Cart Power: 36 Volt Battery System Operator Capacity: 1 Standing Operator Load ...more
JUST ADDED!
1,700 lb. Taylor-Dunn #SC1-75, order picker cart, 24 VDC, key, tool cabinet, 6" vise
HGR24 | Euclid, OH
Category: Material Handling Equipment
Seller: HGR24
Location: Euclid, OH
Mfr: Taylor-Dunn
Model: SC1-75
KEY, TOOL CABINET, 6” VISE.
10" x 10" Pneumatic Slidegate
Ingalls Process Equipment | Painesville, OH
Category: Material Handling Equipment
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) used 10" x 10" Slide Gate Valve. pneumatic.
10' x 10' Security Data Center Caging, 12 Panels, new
Quantum Technology | Shippensburg, PA
Category: Material Handling Equipment
Seller: Quantum Technology
Location: Shippensburg, PA
12 Panels43 in x 2 in x 96 inaverage 5 days, but may vary depending on size, weight, location, and current trucking conditions. This does not include shipping time., Shipping & Freight LogisticsFreight Handling: Average handling lead time is 5 business days (varies by item size, carrier used, and shipping ...more
1000 lb. Presto #B552, Die Cart, 24" x24" platform, 52" max height
Wheeler Machinery Sales | Pomona, CA
Category: Material Handling Equipment
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: B552
PRESTO B552 Die Cart #8273 #1, Load Capacity: 1000 lbs., Raised Height: 52", Lowered Height: 5-1/4", Dimensions: 66-1/2" x 27 x 48-15/16", Battery: 12 Volt, Platform: 24" x 24", Charging: 115 Volt.
13' 7 L x 1' width, Guard Rail, Pre-drilled mounting holes
EcReCon Inc. | Pedericktown, NJ
Category: Material Handling Equipment
Seller: EcReCon Inc.
Location: Pedericktown, NJ
, used Guard Rail. 13' 7 long, 1' wide. Pre-drilled mounting holes.,., Item. Guard Rail, Material. Galv. Steel.
1500 lb. Double form mounted drum gripper #DG, 2 drums, 55 gallon drum size, #67923
Yoder Machinery Sales | Holland, OH
Category: Material Handling Equipment
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: DG
MODEL. DG, NUMBER OF DRUMS. 2, CAPACITY. 1500LBS, DRUM SIZE. 55 GALLON, FORK TINE CENTER. 24", JAW SIZE. 22", AUTOMATIC DRIM RELEASE. YES, HINGE FORK ARM. YES, FORK OPENING. 7-1/4" X 2-1/4".
1500 lb. Presto Lift #BT8127-1500, 127" raised height, 2-1/2" lowered height, 32" ID / 38" OD base legs, 2015
SOMINN Machinery Sales | Dodge Center, MN
Category: Material Handling Equipment
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Presto
Model: BT8127-1500
Year: 2015
PRESTO (USED) MODEL BT8127-1500 LIFT, 1500 LOAD CAPACITY, 127" RAISED HEIGHT, 2-1/2" LOWERED HEIGHT, 32" ID / 38" OD BASE LEGS, 5" FRONT / 4" REAR WHEEL DIAMETER, - ADJUSTABLE SOLID STEEL FORKS, - 1-1/2" THICK X 3" WIDE X 30" LONG, - HAND OPERATED FLOOR LOC.
154,000 lb. System Logistics #Modula-MX50-7300, Automated Warehouse Vertical Lift Module, 12 HP, 575 VAC, 2010
Lenmark Industries | Langley, BC
Category: Material Handling Equipment
Seller: Lenmark Industries
Location: Langley, BC
Mfr: System Logistics
Model: MODULA-MX50-7300
Year: 2010
SKU: 152369, Model: Modula-MX50-7300, Year: 2010, Condition: Used, S/N: MX1000044, Additional :, Rated Power: 8.9 kW, Voltage: 575 VAC, Phase: 3, 60 Hz, Current: 16 A, Mass: 3284 kg (7240 lbs), Rated Load: 70,000 kg (154,000 lbs), Tray Width: 3100 mm, Tray Depth: 654 mm, Tray Wall Height: 70 / 120 mm, Tray Free Load ...more
18000 lb. Lifting tong, Avon Engineering
iGAM | Detroit, MI
Category: Material Handling Equipment
Seller: iGAM
Location: Detroit, MI
Mfr: Avon
LIFTING TONG FOR STEEL BILLIT LIFTING, 18,000LB CAP, LOCATED: AKRON OH, Spec Sheet, AVON ENGINEERING LIFTING TONG, Weight. 8,000.
20' Hydraulic Unloader, Award, Hectronics remote control system, 3600 psi, 2007
Alan Ross Machinery Corp | Zion, IL
Category: Material Handling Equipment
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Award
Year: 2007
Honda Gas Engine, Model ACT20-R, Hectronics Remote Control System, 4 Gang Valvoil Hydraulic Valves, Eaton Hydraulic Pump-3600 PSI, New In 2007, Previously Used To Load Sea Containers.
25 Ton Caldwell #GC-25, Rail and Beam Grabber (2 available)
Savona Equipment | Savona, BC
Category: Material Handling Equipment
Seller: Savona Equipment
Location: Savona, BC
Mfr: Caldwell
Model: GC-25
Caldwell Rail and Beam Grabber. 2 units available. Model: GC-25. Capacity: 25 tons.These clamps provide an efficient method for handling wide flange beam sections and plate girders. Screw-spindle design ensures positive grip.Simple design ensures minimum maintenance.Left-hand thread and right-hand thread screw spingle ...more
2500 lb. Clark Truck Lift, 5 positions, bulldog battery, rechargeable, walk behind, pendant
Scott Machinery & Supply Inc | Helena, AL
Category: Material Handling Equipment
Seller: Scott Machinery & Supply Inc
Location: Helena, AL
CAP.5 POSITIONS FROM 4000-2300 LBS, OVERALL.40"W x 111"L x 98"H, WEIGHT.APPROXIMATELY 2600 LBS, S, BULLDOG BATTERY, RECHARGEABLE, WALK BEHIND, PENDANT, CHERRY PICKER, inspection., Freight charges are not included in sale price. Freight scheduling and costs are responsibility of the buyer. Packaging charges to ensure ...more
28 ft X 6.6 ft Ramp and 9 ft x9 ft Deck
Lenmark Industries | Langley, BC
Category: Material Handling Equipment
Seller: Lenmark Industries
Location: Langley, BC
SKU: 155673, Condition: Used, Additional :, Custom made unit.
3 Wheel personnel maintenance cart, Taylor Dunn #SS5-34, 500 lb. load capacity, 4250 tow capacity,
Yoder Machinery Sales | Holland, OH
Category: Material Handling Equipment
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Taylor
Model: SS5-34
SERIAL., MODEL. SS5-34, LOAD CAPACITY. 500, TOW CAPACITY. 4250 LB, MAXIMUM SPEED. 10 MPH, TRUNING RADIUS. 75", OVERALL WIDTH. 30", WHEEL BASE. 53.5", DECK HEIGHT. 24", BRAKES. CENTER BAND TYPE, TIRES. 4.80 X 8", SUSPENSION FRONT. SHOCK ABSORBERS, SUSPENSION REAR. COIL SPRINGS, BATTERY. (4) @ 6 VOLTS, BATTERY CHARGER. ...more
30' Automatic Bundle Loader, ADC, serial #7295-537, #59878
Yoder Machinery Sales | Holland, OH
Category: Material Handling Equipment
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Adc
SERIAL. 7295-537, TUBE LENGTH. 30'.
3300 lb. Pallet jack, Vestil #EPT, electric, 24 V., serial #MIBA00690, 2022
Yoder Machinery Sales | Holland, OH
Category: Material Handling Equipment
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Vestil
Model: EPT
Year: 2022
SERIAL. MIBA00690, MODEL.EPT, YEAR NEW.2022, CAPACITY.3300 LBS, FLOR LOWERED HEIGHT.3.125", LIFT HEIGHT.7.625", FORK LENGTH.45", WIDTH.27", BATTERY.24 VOLTS.
34000 lb. Steel Platform Skid, 2' beam height x 1' width, 0.525" steel thickness
Lenmark Industries | Langley, BC
Category: Material Handling Equipment
Seller: Lenmark Industries
Location: Langley, BC
SKU: 124424, Condition: Used, Dimensions: 5.00 (H) x 18.00 (W) x 25.00 (L) inches, Additional :, Length: 800 cm (26.25 ft), Width: 532.5 cm (17.47 ft), Height: 61 cm (2 ft), Steel thickness: 0.525 in.
35 Ton Caldwell #F-35, Rail and Beam Grabber
Savona Equipment | Savona, BC
Category: Material Handling Equipment
Seller: Savona Equipment
Location: Savona, BC
Mfr: Caldwell
Model: F-35
Caldwell Rail and Beam Grabber.Model: F-35.Capacity: 35 tons.
360° Spring pallet positioner/leveler, Southworth, 44" dia., with fork pockets & adjustable leveling feet
Cooper Industries Llc | Millwood, WV
Category: Material Handling Equipment
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Southworth
ITEM 2383: SOUTHWORTH 44” DIAMETER, 360° SPRING PALLET POSITIONER/LEVELER WITH FORK POCKETS AND ADJUSTABLE LEVELING FEET, 4500LB CAPACITY, 30” MAX HEIGHT.
4 Strand Transfer Deck, 56" width x 13' 6" L, adjustable legs, end slides
Carolina Machinery Sales | Monroe, NC
Category: Material Handling Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
4 Strand Transfer Deck, 56” wide x 13′6” long, Hydraulic motor drive, adjustable legs, Approx. 30” – 40” tall, Very good condition, low hours, end slides, Ready to load.
JUST ADDED!
40' Yard Loading Ramp, mobile ramp, hinged dock plate & floor plate, hand crank height adjustment, 96" outside width, 87" inside width
Machinery Scene | Toledo, WA
Category: Material Handling Equipment
Seller: Machinery Scene
Location: Toledo, WA
Loading ramp 40 ft long, 40ft long yard ramp (40ft length does not include dock or floor plate length), Hinged dock plate and floor plate, Adjustable loading height from manually turning hand crank handle, Ramp was homemade from used 40ft flatbed semi-trailer, Outside width 96”, Inside width 87” between ...more
400 Lb. Dalmec PEC, Industrial Manipulator, 13' radius, 2024 (2 available)
Revelation Machinery | Chicago, IL
Category: Material Handling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Year: 2024
Make: Dalmec, Model: PEC, Year: 2024, Machine Location: Upon Request, 400lb Capacity, Max working radius: 4000 mm, Max vertical lifting speed: 0,5 meters/second, Vertical lift: 2450 mm.
400 Lb. Dalmec PEC, Industrial Manipulator, 13' radius, 2024
Revelation Machinery | Chicago, IL
Category: Material Handling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Year: 2024
Make: Dalmec, Model: PEC, Year: 2024, Machine Location: Upon Request, 400 lb Capacity, Max working radius: 4000 mm, Max vertical lifting speed: 0,5 meters/second, Vertical lift: 2450 mm.
4000 lb. Pallet jack, Hyster #WZ40, electric, 24 V., like new, serial #B2118N21829J
Yoder Machinery Sales | Holland, OH
Category: Material Handling Equipment
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hyster
Model: WZ40
Year: 2022
SERIAL. B2118N21829J, MODEL.WZ40, CAPACITY. 4000 LBS, LENGTH OF FORKS. 47", FORK WIDTH. 7", FORK SPREAD. 27", FLORK HEIGTH LOWERED. 3-1/4", FORK HEIGHT RAISED. 8.3", OVERALL WIDTH. 29.2", OUTSIDE TURNING RADIUS. 59.3", TRAVEL SPEED. VARIABLE, DRIVE TIRES. 9"X 5", REVERSING SWITCH. YES, BATTERY. 24 VOLTS, LIKE NEW. YES.
JUST ADDED!
4500 lb. Walkie, Toyota #8HBW23, battery powered, 24 V., onboard 110 V. charger, serial #47067
Platinum Asset Services | Scarborough, ON
Category: Material Handling Equipment
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Toyota
Model: 8HBW23
TOYOTA, 8HBW23, 4,500 LBS., 24V, BATTERY POWERED, WALKIE, ONBOARD 110V CHARGER, 1,736 HOURS, S/N 47067, TOYOTA 8HBW23.
JUST ADDED!
4500 lb. Walkie, Unicarriers #WLXT2W7S22V, battery powered, 24 V., 110 V. onboard charger, 266 hours, 2019
Platinum Asset Services | Scarborough, ON
Category: Material Handling Equipment
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Unicarriers
Model: WLXT2W7S22V
Year: 2019
2019, UNICARRIERS, WLXT2W7S22V, 4,500 LBS., 24V, BATTERY POWERED, WALKIE, 226 HOURS, 110V BUILT ONBOARD CHARGER, S/N 2W75-9305426, 2019 UNICARRIERS WLXT2W7S22V.
48" x 30" x 39" Jobox Box on Casters
Yoder Machinery Sales | Holland, OH
Category: Material Handling Equipment
Seller: Yoder Machinery Sales
Location: Holland, OH
OUTSIDE LENGTH. 48", OUTSIDE WIDTH. 30", OVERALL HEIGHT. 39", INSIDELENGTH. 47", INSIDE WIDTH. 47-1/4", INSIDE DEPTH. 39", PORTABLE ON CASTERS. YES, WILTON VISE. 4-1/2" X 4-1/2".
48" x 48" Pallet Turntable, 360° continuous rotation, 6-1/2" overall height, 2-way fork pockets, 7-3/4" x 2" pocket opening, (20 available)
Machinery Scene | Toledo, WA
Category: Material Handling Equipment
Seller: Machinery Scene
Location: Toledo, WA
pallet/box material handling 360-degree rotating platform industrial turntable, 20 turntables, available, Repainted blue, Platform size 4ft x 4ft, total height: 6 ½ inches, fork pocket width 7 ¾ inches, Fork pocket openings: 7 ¾” width X 2”+- thickness, fork pockets spacing: minimum ...more
5,000 lb. Wheeled Lever Dolly, 72" Long, Steel, 5" Neoprene Wheels
Savona Equipment | Savona, BC
Category: Material Handling Equipment
Seller: Savona Equipment
Location: Savona, BC
72 inch Wheeled Lever Dolly. Length: 75 inches.Material: Steel.Wheels: 5 inch neoprene.Capacity: 5,000 lbs.Integrated kick bar to help push the lifting plate under the piece to be moved.Lift plate is grooved to help grip the load., Please contact us for more information..
6' x 2' wide industrial steel access ladder w/ han
Lenmark Industries | Langley, BC
Category: Material Handling Equipment
Seller: Lenmark Industries
Location: Langley, BC
SKU: 130480, Condition: Used - Like New, Dimensions: 25.00 (H) x 43.00 (W) x 72.00 (L) inches, Additional :, Length: 6 Ft, Width: 2 Ft.
60 Ton Hilman #60-WBNT, Wide-Body Mountable Machinery Rollers, 10 Rolls/Chain, 2 Chains/Unit (6 available)
Savona Equipment | Savona, BC
Category: Material Handling Equipment
Seller: Savona Equipment
Location: Savona, BC
Mfr: Hilman
Model: 60-WBNT
60-Ton Hilman Wide-Body Mountable Rollers, Quantity: (6) Units - Sold as Package, Make: Hilman Inc.Model: 60-WBNTType: Machinery Load RollersStyle: Wide-Body, Narrow Top, MountableCondition: Used Condition - "Good Condition, Used 2-3 Times"Capacity: 60-TonChains: 2-Chains Per UnitRollers: 10 Rolls Per ChainMounting ...more
6000 lb. Benju #LTL-Lift 3000, Benju Corp Forklift Mounted Man Work Platform, 24" Load Center, 1000 psi
Genemco | Hearne, TX
Category: Material Handling Equipment
Seller: Genemco
Location: Hearne, TX
Mfr: Benju Corp
Model: 3000
Benju Corp LTL-Lift Forklift Mounted Man Work Platform. Model: LTL-Lift 3000. Serial: 2466L. Max hydraulic pressure: 1000 PSI. Lifting capacity rated By size of forklift: 6000 lbs / 300 lbs, 4000 lbs / 450 lbs, 5000 lbs / 600 lbs, 6000 lbs / 750 lbs (forklift size / basket capacity, all on 24 in. Load Center ...more
7000 lb. Electric Battery Tugger, Carney Battery Handling #ETA-30-24-FM, 2009
Platinum Asset Services | Scarborough, ON
Category: Material Handling Equipment
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Carney Battery Handling
Model: ETA-30-24-FM
Year: 2009
2009, CARNEY BATTERY HANDLING, ETS-30-24-FM, 7,000 LBS. ELECTRIC BATTERY TUGGER, S/N CHA0055, 2009 CARNEY ETS-30-24-FM.
JUST ADDED!
75 Lb. Dalmec #PEC, column mounted manipulator, 87" x 44" x 51" part, 0.90 MPa, 2020 (3 available)
HGR24 | Euclid, OH
Category: Material Handling Equipment
Seller: HGR24
Location: Euclid, OH
Mfr: Dalmec
Model: PEC
Year: 2020
PART MEASURES 87” X 44” X 51”, 0.90 MPA, CONTROL CABINETS ALL LOCKED.
JUST ADDED!
750 lb. Pack Mule, maintenance cart, 2015
Smith Machinery Co | Ames, IA
Category: Material Handling Equipment
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Pack Mule
Year: 2015
JUST ADDED!
750 lb. Pack Mule, maintenance cart, 2011
Smith Machinery Co | Ames, IA
Category: Material Handling Equipment
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Pack Mule
Year: 2011
900 Lb. Dalmec #MGC, Industrial Manipulator, 13' radius, 2024
Revelation Machinery | Chicago, IL
Category: Material Handling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Model: MGC
Year: 2024
Make: Dalmec, Model: MGC, Year: 2024, Machine Location: Upon Request, 900lb Capacity, Max working radius: 4000 mm, Max vertical lifting speed: 0,5 meters/second, Vertical lift: 2450 mm.
900 Lb. Dalmec #MGC, Industrial Manipulator, 13' radius, 2024 (3 available)
Revelation Machinery | Chicago, IL
Category: Material Handling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Model: MGC
Year: 2024
Make: Dalmec, Model: MGC, Year: 2024, Machine Location: Upon Request, 900lb Capacity, Max working radius: 4000 mm, Max vertical lifting speed: 0,5 meters/second, Vertical lift: 2450 mm.
