Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: August 22, 2026 at 2:56 PM
Industry: Generators & Engines
Price: 100K OBO
480 Volt
Stamford Gen end 1050kW
Blue Diania Controls Complete
No Beaker
Ran on City water
Unit on 37000 hours, rebuilt; ran for 12 hours then shut down.
Unit 2 / Hours could not be confirmed. Both turn 360 with ease; units are still installed
Large Gas Trane Tree
Stamford Gen end 1050kW
Blue Diania Controls Complete
No Beaker
Ran on City water
Unit on 37000 hours, rebuilt; ran for 12 hours then shut down.
Unit 2 / Hours could not be confirmed. Both turn 360 with ease; units are still installed
Large Gas Trane Tree
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 22, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Vertical Range (Under Wheel): 7"
Table Speed: 15 - 64 RPM
Wheel Speed: 1160 RPM
Magnet Chuck Wear: 3/8" Remaining
Electrical Requirements: 230V / 460V 3 Phase
Power Incremental Down Feed
20" Magnetic Chuck
Spindle Motor: 15 HP
Coolant System
Magna Chuck Control
Incremental Down Feed
Splash Guards
Table Speed: 15 - 64 RPM
Wheel Speed: 1160 RPM
Magnet Chuck Wear: 3/8" Remaining
Electrical Requirements: 230V / 460V 3 Phase
Power Incremental Down Feed
20" Magnetic Chuck
Spindle Motor: 15 HP
Coolant System
Magna Chuck Control
Incremental Down Feed
Splash Guards
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 22, 2026 at 9:28 AM
Industry: General Machinery & Equipment
X-Axis Travel: 120"
Y-Axis Travel: 60"
Z-Axis Travel: 24"
C-Axis: 360 degrees
B-Axis (Tilt): 180-degree head tilt
Rapid Rate: Up to 900 IPM
Spindle: 18k
Tooling: ER32 collet system
Air Supply: 90 PSI
Electrical: 220V / 440V AC, 3-Phase, 60 Hz
Thermwood 91000 Series SuperControl
Dual Moving Tables
Y-Axis Travel: 60"
Z-Axis Travel: 24"
C-Axis: 360 degrees
B-Axis (Tilt): 180-degree head tilt
Rapid Rate: Up to 900 IPM
Spindle: 18k
Tooling: ER32 collet system
Air Supply: 90 PSI
Electrical: 220V / 440V AC, 3-Phase, 60 Hz
Thermwood 91000 Series SuperControl
Dual Moving Tables
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 22, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Description: Maximum Sheet Width: 60"
Material Gauge Capacity: 30 gauge to 16-gauge mild steel … [Read more...]
Material Gauge Capacity: 30 gauge to 16-gauge mild steel … [Read more...]
Accuracy: 0.030inch
Coil Positions: 4-station multi-coil underfed storage rack/cradle bed
Station Capacity: ~10,000lbs
Main Straightener/Feed Drive: 10 HP motor
Line Speed: Variable up to 100 FPM
Exit Roller Table
AMS Controls XL100 Series Operator Console
4-Station Multi-Coil Rack / Bed
Coil Positions: 4-station multi-coil underfed storage rack/cradle bed
Station Capacity: ~10,000lbs
Main Straightener/Feed Drive: 10 HP motor
Line Speed: Variable up to 100 FPM
Exit Roller Table
AMS Controls XL100 Series Operator Console
4-Station Multi-Coil Rack / Bed
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 3:32 PM
Industry: General Machinery & Equipment
Price: 5000
Description: Up for sale is a used Trane unit. It is sold as is it needs a new compressor. Other than that the unit works. Buyer would be responsible for pickup.
Manufacturer: Trane … [Read more...]
Manufacturer: Trane … [Read more...]
Model: YFD300B4H4HB
Serial: 631100282D
Capacity: 25 tons
Type: Packaged rooftop unit / RTU
Heating: Natural gas
Efficiency: Standard-efficiency Voyager series
Electrical: 460V, 3-phase
Refrigeration: R-22
Two refrigeration circuits
Serial: 631100282D
Capacity: 25 tons
Type: Packaged rooftop unit / RTU
Heating: Natural gas
Efficiency: Standard-efficiency Voyager series
Electrical: 460V, 3-phase
Refrigeration: R-22
Two refrigeration circuits
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 3:03 PM
Industry: General Machinery & Equipment
Description: Edge/FMB Turbo 5-65V/3800 Magazine-type Automatic Bar Feed, 12'6" Bar Length, 2.6" Max. Bar Diam., Hand-held Control, Left-hand Feed, Channel Set, Nose piece, Misc. Collets, Hyd. System, Manual, LOW USAGE, New 2019.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 3:02 PM
Industry: General Machinery & Equipment
Description: Yaskawa Motoman MA-1900 Robotic Welding Cell, With Yaskawa type YR-MA01900-A00 6-Axis Robot with 75" Reach, 3Kg Payload Capcity, Yaskawa DX100 Control, Miller Auto Axcess 300 DI Welding Power Supply, Hand-held Welder Remote, (2) Work/Fixture Tables Mounted on a Turn-table for Separate Set-up and Welding Cells, LOW USAGE, New 2012.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 2:58 PM
Industry: General Machinery & Equipment
Description: Looking for Haas part number 20-1857A or 20-1857B. It's a discontinued bracket used to mount a tool changer to a GR712 machine. Trying to find either a drawing of this part, or a used one for sale.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 1:14 PM
Industry: Processing Equipment
Price: Best offer
Description: 480 Ton, Negri Bossi #VE-4800H-3600 & 430 Ton, Negri Bossi Vesta M154-4300H-1580 for Sell
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 12:39 PM
Industry: Other Electrical & Power Equipment
Serial #: G54263-S
Drawing #: M-55400
Rating: 4000A, 208V, 60Hz
Drawing #: M-55400
Rating: 4000A, 208V, 60Hz
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 12:00 PM
Industry: General Machinery & Equipment
BO206-III
S206-III
Please send anything you have for review.
S206-III
Please send anything you have for review.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 11:47 AM
Industry: General Machinery & Equipment
Description: Quincy QSI-500 Air compressor. Rotary screw, well maintained with Pneumatech Air Dryer. Airflow Capacity: 500 CFM, 100 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 11:46 AM
Industry: General Machinery & Equipment
Price: $80,000
Description: MVD 6Kw Laser, 5' x 10', Dual Pallet Shuttle Table, Dust Collector, Nesting Software, Camera Cutting Monitoring, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 11:23 AM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: New or used Aluminum nonferrous up stroking circular saw. Must be able to cut 12" wide x 4" high alum extrusion at 90 degrees. Mitering not required. Must be accurate to 1/16”. Need an automatic feed system. The longest length section will be 24'. The shortest cut length is 3’ and the longest is 10’ lengths.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 11:02 AM
Industry: Circuit Breakers
Description: Eaton Instant panel board , single phase distribution Kit 400 amp 240v
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 10:24 AM
Industry: General Machinery & Equipment
Description: New / Used / Take off 3 Jaw Power Chuck
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 10:15 AM
Industry: Motors - A.C. & D.C.
Budget: Over $100,000
Description: Looking for a drop in replacement 2000HP, 225RPM, 4160V, 6000 Frame GE motor. Or equivalent Frame and speed.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 10:07 AM
Industry: General Machinery & Equipment
Description: I have a customer with a immediate need for a TWO hydraulic forging presses.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 9:57 AM
Industry: General Machinery & Equipment
Price: POR
Description: 189” X 234” Robotic Laser with Extended Side Panels, Kuka Robot KR 30 High Accuracy, Kuka Robot Platform Deduction for Utilization of Existing Trudisk 3001 Fiber Engine, Turn Tilt Positioner Table and Dual Station Table.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 9:36 AM
Industry: General Machinery & Equipment
Price: 12,500
Description: SOUTHWESTERN INDUSTRIES Model TRAK-1630SX
16” x 30” TRAK TRL Lathe With ProtoTrak SLX CNC Control, … [Read more...]
16” x 30” TRAK TRL Lathe With ProtoTrak SLX CNC Control, … [Read more...]
7.5Hp, 220-Volt, 3-Phase, S/N 07FC1512
Item specifics:
LATHES, CNC, FLAT BED
Brand: SOUTHWESTERN TRAK
Model: TRL 1630SX
Year: 2018
Swing: 16"
Machining Length: 30"
# Axis: 2
Bar Capacity: 1.57"
Powe: 7.5 hp
Max RPM: 2,500 RPM
Turning Dia: 16"
Tailstock: 'Yes'
Live Tooling'
Sub Spindle''
Weight
2500
Dimensions
82 X 46 X 67
In Los Angeles, CA
Item specifics:
LATHES, CNC, FLAT BED
Brand: SOUTHWESTERN TRAK
Model: TRL 1630SX
Year: 2018
Swing: 16"
Machining Length: 30"
# Axis: 2
Bar Capacity: 1.57"
Powe: 7.5 hp
Max RPM: 2,500 RPM
Turning Dia: 16"
Tailstock: 'Yes'
Live Tooling'
Sub Spindle''
Weight
2500
Dimensions
82 X 46 X 67
In Los Angeles, CA
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 9:31 AM
Industry: General Machinery & Equipment
Price: best offer
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 9:22 AM
Industry: General Machinery & Equipment
Description: 2016 or newer Haas TL2 needed, must have full guarding, and 4 way tool turret. 30k budget
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 9:09 AM
Industry: General Machinery & Equipment
100 Ton Upacting Hyd Press
Watson Stillman 100 Ton UpActing Hyd Press
Hess-Mae 30 Ton Hyd Press
Greenerd 12 Ton Gap Frame Hyd Press
120 x 30 Dia table with hoist
6' x 3' Steel layout table
6' x 3' Granite surface plate
Rapid Air F6 air feeder
Yale 5000# Forklift
Wesco 1000# Manual Die Lift Cart
Contact our sales team today or visit our website
Watson Stillman 100 Ton UpActing Hyd Press
Hess-Mae 30 Ton Hyd Press
Greenerd 12 Ton Gap Frame Hyd Press
120 x 30 Dia table with hoist
6' x 3' Steel layout table
6' x 3' Granite surface plate
Rapid Air F6 air feeder
Yale 5000# Forklift
Wesco 1000# Manual Die Lift Cart
Contact our sales team today or visit our website
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 9:00 AM
Industry: General Machinery & Equipment
Willis Microcut 1050 Vertical Knee Mill
Haas VF-3 Vertical Machining Center - 1998
Southbend 17" Turnado Engine Lathe
Do All VS618 Hand Feed Surface Grinder
Ingersoll Rand 3HP Tank Mounted Air Compressor
Do All 3012-U Vertical Band Saw
Kalamazoo Horizontal Band Saw
Kalamazoo Vertical Belt Sander
Accurpress 7606 60 Ton x 6' Hydraulic Press Brake
Verson Mechanical Press Brake
Kingsland 60P / 625 Single End Hydraulic Punch w/ tooling
Haas VF-3 Vertical Machining Center - 1998
Southbend 17" Turnado Engine Lathe
Do All VS618 Hand Feed Surface Grinder
Ingersoll Rand 3HP Tank Mounted Air Compressor
Do All 3012-U Vertical Band Saw
Kalamazoo Horizontal Band Saw
Kalamazoo Vertical Belt Sander
Accurpress 7606 60 Ton x 6' Hydraulic Press Brake
Verson Mechanical Press Brake
Kingsland 60P / 625 Single End Hydraulic Punch w/ tooling
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 8:35 AM
Industry: General Machinery & Equipment
Description: 4" Tos W100A Horizontal Boring Mill, 44” Vertical, 63” Cross, 49” Saddle, Facing Head, Tail Sock, Tooling, 49” x 49” Built In Power Rotary Table, 4 Axis DRO
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 7:45 AM
Industry: General Machinery & Equipment
Model C2512
2,500 lbs. capacity x 12" width
Motorized with arm
Need several
2,500 lbs. capacity x 12" width
Motorized with arm
Need several
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Max turning dia 11.4"
Max machining length 19.7"
Distance between spindles 32.3"
Main spindle A2-6 nose
spindle bore 2.99"
bar capacity 2.56–2.67"
Main spindle 4,500 RPM
Main spindle motor 25 hp
Sub-spindle 1.69" thru-hole
Sub-spindle stroke 22.8"
Turret 12-station
Travels X 8.07" / Z 22.83"
Rapids X 945 IPM, Z 1,181 IPM
Hyd. 3-jaw Kitagawa & Samchully chucks
LNS Turbo hinge-belt chip conveyor
Tool Setter
Parts Catcher & Conveyor
Max machining length 19.7"
Distance between spindles 32.3"
Main spindle A2-6 nose
spindle bore 2.99"
bar capacity 2.56–2.67"
Main spindle 4,500 RPM
Main spindle motor 25 hp
Sub-spindle 1.69" thru-hole
Sub-spindle stroke 22.8"
Turret 12-station
Travels X 8.07" / Z 22.83"
Rapids X 945 IPM, Z 1,181 IPM
Hyd. 3-jaw Kitagawa & Samchully chucks
LNS Turbo hinge-belt chip conveyor
Tool Setter
Parts Catcher & Conveyor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Z axis travel 20"
Spindle taper BT 40
Spindle motor 20 hp
Spindle speed 10,000 RPM
Tool changer 20 ATC
Table size 46" x 18"
(20) BT 40 Tooling
Chip Auger
Flood coolant
Chiller Unit
Spindle Replaced (2 Years Ago)
Spindle taper BT 40
Spindle motor 20 hp
Spindle speed 10,000 RPM
Tool changer 20 ATC
Table size 46" x 18"
(20) BT 40 Tooling
Chip Auger
Flood coolant
Chiller Unit
Spindle Replaced (2 Years Ago)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 21, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Free-standing control console
heavy fabricated plate housings
two tapered work rolls
hydraulic cylinders
hand-wheel roll adjustment
yellow adjustable entry/exit guide tooling with a forming cone/mandrel
Hydraulic power unit
heavy fabricated plate housings
two tapered work rolls
hydraulic cylinders
hand-wheel roll adjustment
yellow adjustable entry/exit guide tooling with a forming cone/mandrel
Hydraulic power unit
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 4:44 PM
Industry: General Machinery & Equipment
Description: Amada HDS2204NTW CNC Hydraulic Press Brake (2012)
240 Ton X 14' Flush Floor, Bend up to 1" Material, Robotic Loader, Available Astro 165W NT Robotic Bending System
240 Ton X 14' Flush Floor, Bend up to 1" Material, Robotic Loader, Available Astro 165W NT Robotic Bending System
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 3:39 PM
Industry: Circuit Breakers
Description: Looking for a Westinghouse 50 DHP-75 1200A breaker. Any controls would be fine. Just need a breaker that is suitable for rebuild.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 2:31 PM
Industry: Motors - A.C. & D.C.
Description: Looking for a unit that could be used as a backup for a 3000hp 240rpm 4000v Synchronous motor for a ball mill.
I have attached a nameplate photo of the existing unit.
I have attached a nameplate photo of the existing unit.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 2:07 PM
Industry: General Machinery & Equipment
Price: 40,000
Description: LIKE-NEW 2024 ECO EBV-88 Industrial Burn-Off Oven – Extremely Low Use – $40,000 OBO
For sale is a like-new ECO Burn-Off Ovens Model EBV-88 industrial burn-off oven, manufactured January 2024. … [Read more...]
For sale is a like-new ECO Burn-Off Ovens Model EBV-88 industrial burn-off oven, manufactured January 2024. … [Read more...]
This unit was purchased new and has only been used a couple of times. It is being sold due to lack of use, not because of any known issue with the equipment.
The oven is exceptionally clean and presents an opportunity to purchase a very lightly used industrial burn-off oven without paying the cost
The oven is exceptionally clean and presents an opportunity to purchase a very lightly used industrial burn-off oven without paying the cost
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 2:06 PM
Industry: Processing Equipment
Price: Best offer
Description: 25' long conveyor with steel flights including Hydraulic pump, tank and drive used one day feeding coal to a power plant for a test.
It is attached to a truck/loader dump hopper and the conveyor can be removed. The truck/loader dump hopper can be included with the conveyor attached. … [Read more...]
It is attached to a truck/loader dump hopper and the conveyor can be removed. The truck/loader dump hopper can be included with the conveyor attached. … [Read more...]
Needs refurbushed since it has not operated for years.
Some of the original paint is still on a couple of the flights.
Stamler Oldenburg model
Some of the original paint is still on a couple of the flights.
Stamler Oldenburg model
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 1:50 PM
Industry: Motors - A.C. & D.C.
Description: P & H 75 HP 1165 RPM HEW444X FRAME 230/460 VOLTS STATOR 395 VOLTS ROTOR TENV CRANE MOTOR
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 1:50 PM
Industry: Forklifts, Construction & Earthmoving
Price: $8500 obo
Description: 2017 Yale GLP080VXNTGE098:
98//207" three stage mast, Cascade sideshifting fork positioner, 4-way, 8000lb capacity, solid pneumatic tires, propane fuel, 48" forks, load backrest, partial cab (no windshield), 11,861 hours, good appearance … [Read more...]
98//207" three stage mast, Cascade sideshifting fork positioner, 4-way, 8000lb capacity, solid pneumatic tires, propane fuel, 48" forks, load backrest, partial cab (no windshield), 11,861 hours, good appearance … [Read more...]
Runs & fully operational - just removed from service
Now $8500 OBO
Now $8500 OBO
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 1:47 PM
Industry: Forklifts, Construction & Earthmoving
Price: $5500 obo
Description: 2014 Yale GLP060VXNVSE106:
106/229" three stage mast, sideshifter, 6000lb capacity, solid pneumatic tires, propane fuel, 48" forks, load backrest, partial cab, 16,093 hours, good appearance (photos below) … [Read more...]
106/229" three stage mast, sideshifter, 6000lb capacity, solid pneumatic tires, propane fuel, 48" forks, load backrest, partial cab, 16,093 hours, good appearance (photos below) … [Read more...]
Runs & fully operational - just removed from service
Now $5500 obo
Now $5500 obo
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 12:43 PM
Industry: General Machinery & Equipment
Vertical Headstock Travel (Y): 72"
Longitudinal Saddle Travel (Z): 84"
Spindle Travel (W): 36"
Spindle Diameter: 5"
Spindle Horsepower: 40 HP
Spindle Speed Range: 7.5– 975 rpm
Electrical Requirements: 220V / 440 V 3 Phase
Manual and Power Feeds
T Slotted Table
Longitudinal Saddle Travel (Z): 84"
Spindle Travel (W): 36"
Spindle Diameter: 5"
Spindle Horsepower: 40 HP
Spindle Speed Range: 7.5– 975 rpm
Electrical Requirements: 220V / 440 V 3 Phase
Manual and Power Feeds
T Slotted Table
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 12:41 PM
Industry: General Machinery & Equipment
Side Roll Diameter 7.5"
Roll Hardness 45RC
Motor 10 HP
Rolling Speed 14 fpm
4-roll initial-pinch design
Hydraulic drop end
Hydraulic roll drive
Console Mounted Controls
Electronic Speed Control
Full-length safety trip cable
Approximate Weight 24,450 Ibs
Floor Space 64 x 224"
Roll Hardness 45RC
Motor 10 HP
Rolling Speed 14 fpm
4-roll initial-pinch design
Hydraulic drop end
Hydraulic roll drive
Console Mounted Controls
Electronic Speed Control
Full-length safety trip cable
Approximate Weight 24,450 Ibs
Floor Space 64 x 224"
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 12:40 PM
Industry: General Machinery & Equipment
T-slots (4) 5/8" wide
Max table load (1,323 lb)
Spindle nose to table 5.91" – 24.25"
Spindle power 20 hp
Rapids 1,417 ipm X/Y, 1,181 ipm Z
Only 2271 Cutting Hours
4th Axis Ready
Renishaw Probing System
30 Station ATC
CT40 Big Plus Spindle
10000rpm Spindle Speed
Through Spindle Coolant
Kaukan Spindle Oil Chiller
MPG remote jog pendant
Flood Coolant
Coolant Tank w/ Pump
Chip Conveyor
Work Light
Max table load (1,323 lb)
Spindle nose to table 5.91" – 24.25"
Spindle power 20 hp
Rapids 1,417 ipm X/Y, 1,181 ipm Z
Only 2271 Cutting Hours
4th Axis Ready
Renishaw Probing System
30 Station ATC
CT40 Big Plus Spindle
10000rpm Spindle Speed
Through Spindle Coolant
Kaukan Spindle Oil Chiller
MPG remote jog pendant
Flood Coolant
Coolant Tank w/ Pump
Chip Conveyor
Work Light
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 12:25 PM
Industry: Generators & Engines
750kw, 480 volt
Control panel
Circuit breaker
24 volt DC electric start
Radiator cooled
1200 gal double wall fuel tank
Weatherproof enclosure
Kohler model no: 750ROZD4
Serial number: 0664711
Engine model no: R1237K36
Engine serial no: 5952000693
2003 model year
1733 total hours since new
$51,000 FOB MN.
Price includes loading onto buyer transport
Control panel
Circuit breaker
24 volt DC electric start
Radiator cooled
1200 gal double wall fuel tank
Weatherproof enclosure
Kohler model no: 750ROZD4
Serial number: 0664711
Engine model no: R1237K36
Engine serial no: 5952000693
2003 model year
1733 total hours since new
$51,000 FOB MN.
Price includes loading onto buyer transport
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 12:06 PM
Industry: General Machinery & Equipment
Description: Looking for a used tool setter for mazak quick turn 250 lathe.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 11:48 AM
Industry: General Machinery & Equipment
Price: $2000
Description: Surplus from the Canadian government, no rust, primer
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 11:37 AM
Industry: General Machinery & Equipment
Price: 14500
Description: SERIAL ........................ 3191004
YEAR ........................... 2022 … [Read more...]
YEAR ........................... 2022 … [Read more...]
MODEL .......................... L-CUTNEO M-4P
FAN POWER ...................... 5.5KW
NUMBER OF FILTERS .............. 4
CARTRIDGE FILTER W/NANOFIBER ... YES
FILTER SIZE .................... 327 MM X 985 MM 24M2
FILTER PART .................... #8000343378
FAN POWER ...................... 5.5KW
NUMBER OF FILTERS .............. 4
CARTRIDGE FILTER W/NANOFIBER ... YES
FILTER SIZE .................... 327 MM X 985 MM 24M2
FILTER PART .................... #8000343378
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 11:12 AM
Industry: Forklifts, Construction & Earthmoving
Price: $18,500
Description: This machine runs and operates like a new one, It doesn't have any leaks and comes with brand new tires, battery and a fresh oil and filter change! Rockford Bobcat says it has the H13 package, and YES it does have auxiliary hydraulics, 3,300 pound capacity with a 6,600 tipping load!!! The Vin number is A3P411952. This bad boy has a big. 93 horsepower Kubota turbo diesel and weighs 9,300 pounds, so it is NOT suitable to be hauled on a 14,000 gvw trailer. Call me anytime at 815-440-9057.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 9:52 AM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: 160-Ton Thermoset Compression Molding Machine with Electric heaters. Equipment specs: Molds require temperature control; Upper mold temperature at 190 C; Lower mold at 195 C; 24"x24" platens; Stroke 2-5 inches; automatic feeding of urea formaldehyde materials; automatic removal of molded product; Automatic control system capable of storing 20+ profiles
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 9:47 AM
Industry: General Machinery & Equipment
Description: Alesa Monti, Floor Type CNC Horizontal Boring Mill, 6" Spindle, 475" X Travel, 128" Y, 40" Z, 20" W, 80" B, 360° C, 80" Rotary Table, ATC, Chip Conveyor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 9:17 AM
Industry: General Machinery & Equipment
Description: Looking for Haas part number 20-1857A or 20-1857B. It's a discontinued bracket used to mount a tool changer to a GR712 machine. Trying to find either a drawing of this part, or a used one for sale.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 9:16 AM
Industry: General Machinery & Equipment
Description: Edge/FMB Turbo 5-65V/3800 Magazine-type Automatic Bar Feed, 12'6" Bar Length, 2.6" Max. Bar Diam., Hand-held Control, Left-hand Feed, Channel Set, Nose piece, Misc. Collets, Hyd. System, Manual, LOW USAGE, New 2019.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 9:14 AM
Industry: Motors - A.C. & D.C.
Description: Reliance 60 HP DC Motor--1150/1900 RPM--C2515ATZ Frame--500/300 Volt
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 9:09 AM
Industry: General Machinery & Equipment
Description: Looking for a used CNC bed-type vertical milling machine. Must have at least 30" of X-travel, and 40 taper. Prefer Fryer, or Trak. Tree might be considered if still in good operating condition.
Mid-west location - looking for something located between about Milwaukee to Memphis
Mid-west location - looking for something located between about Milwaukee to Memphis
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 8:55 AM
Industry: Forklifts, Construction & Earthmoving
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 8:50 AM
Industry: General Machinery & Equipment
Description: USED CLAUSING 21" X 80" MULTITURN 4000/80XS CNC LATHE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 8:10 AM
Industry: Generators & Engines
Complete plant with cooling system, switchgear, and spare parts
10,500KW total, 4160V
Contact us for special pricing and more info
10,500KW total, 4160V
Contact us for special pricing and more info
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 8:01 AM
Industry: Transformers
Price: Looking for offer
Description: 138kV Instrument Transformer Lot
Includes 6 CCVTs, 3 Current Transformers, and 1 Metering Transformer … [Read more...]
Includes 6 CCVTs, 3 Current Transformers, and 1 Metering Transformer … [Read more...]
Contact me for details pertaining to loading & shipping prep (not available), photos available, looking for offer.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 20, 2026 at 8:01 AM
Industry: Other Electrical & Power Equipment
Price: Looking for offer
Description: 138kV Instrument Transformer Lot
Includes 6 CCVTs, 3 Current Transformers, and 1 Metering Transformer … [Read more...]
Includes 6 CCVTs, 3 Current Transformers, and 1 Metering Transformer … [Read more...]
Contact me for details pertaining to loading & shipping prep (not available), photos available, looking for offer.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 7:04 PM
Industry: Circuit Breakers
4 - Burndy Part # YAV10-2TC38
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 4:44 PM
Industry: Transformers
480 delta primary
208/120 secondary
Nema 4 enclosure - Stainless steel
208/120 secondary
Nema 4 enclosure - Stainless steel
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 3:44 PM
Industry: General Machinery & Equipment
Description: 28" x 240" min Lathe. in/mm threading.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 3:15 PM
Industry: General Machinery & Equipment
Description: Yaskawa Motoman MA-1900 Robotic Welding Cell, With Yaskawa type YR-MA01900-A00 6-Axis Robot with 75" Reach, 3Kg Payload Capcity, Yaskawa DX100 Control, Miller Auto Axcess 300 DI Welding Power Supply, Hand-held Welder Remote, (2) Work/Fixture Tables Mounted on a Turn-table for Separate Set-up and Welding Cells, LOW USAGE, New 2012.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 3:12 PM
Industry: General Machinery & Equipment
Description: Edge/FMB Turbo 5-65V/3800 Magazine-type Automatic Bar Feed, 12'6" Bar Length, 2.6" Max. Bar Diam., Hand-held Control, Left-hand Feed, Channel Set, Nose piece, Misc. Collets, Hyd. System, Manual, LOW USAGE, New 2019.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 3:07 PM
Industry: General Machinery & Equipment
Description: Looking for Haas part number 20-1857A or 20-1857B. It's a discontinued bracket used to mount a tool changer to a GR712 machine. Trying to find either a drawing of this part, or a used one for sale.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 2:14 PM
Industry: General Machinery & Equipment
Description: Need 55" minimum ocs x 20' cc, IN/MM Threading, Taper not required.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 1:44 PM
Industry: General Machinery & Equipment
Description: In Need of a Cav-20 Bar Loader for Citizen L20
Immediate buyer. must be in good working condition
Immediate buyer. must be in good working condition
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 1:19 PM
Industry: Generators & Engines
Price: $79,500.00
Description: 144 KW Shindaiwa DGK180F Kwiet Mobile Diesel Genset, 132 Hour 2023 Year, ISUZU 6HK1 Engine Tier 4 Final, Premium Generator Control Panel, Auto Start / Stop, Engine Safety Shutdowns, Selector Switch for 3 Phase & 1 Phase Operation, Circuit Breakers, Electronic Governor, Electrical Distro Panel with Convenience Receptacles, Jacket Water Heater, Elec. Starter, 35Amp Alternator, Std Duty Air Cleaner, Exhaust Silencer, Radiator, 65 dba Sound Attenuated Enclosure, 475 Gallon Fuel Tank Base, Tandem Axl
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 12:52 PM
Industry: General Machinery & Equipment
Description: Hardinge HLV-H Toolroom Lathe
Good condition
Good condition
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 12:34 PM
Industry: Other Electrical & Power Equipment
Description: Eaton Cutler Instant Switchboard , single phase
Distribution Kit - 400 amp quote what you have .
Distribution Kit - 400 amp quote what you have .
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 12:03 PM
Industry: Circuit Breakers
Description: MGA36450 NTO or like new
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 12:02 PM
Industry: General Machinery & Equipment
Description: USED 10' X 20' WATERJET 2016 OR NEWER
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 11:55 AM
Industry: Circuit Breakers
Description: MGA36450 NTO or like new
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 11:53 AM
Industry: Motors - A.C. & D.C.
Description: Looking to purchase a Press duty electric motor any brand 200hp 1125rpm 585y fr. 460v. e-ok or rebuilt
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 11:43 AM
Industry: General Machinery & Equipment
Description: USED Cordex or Zeiss CMM 48" table, need 20" height. Customer is measuring ID / OD of parts. Closer to the Detroit area the better.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 10:54 AM
Industry: General Machinery & Equipment
Description: We are an automobile component manufacturing company currently looking to procure used, reconditioned, or fully operational mechanical presses for our production requirements.
We request you to kindly share your best commercial quotation for available machines matching the specifications outlined below. … [Read more...]
We request you to kindly share your best commercial quotation for available machines matching the specifications outlined below. … [Read more...]
Requirement Summary in Photo below.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 9:57 AM
Industry: Motors - A.C. & D.C.
Description: Looking for a drop in new, surplus, or rebuilt replacement for a Siemens 1-5113-69725-02-2. 350hp 880rpm 4160volt 588US frame. Please advise ASAP.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 9:15 AM
Industry: General Machinery & Equipment
Description: Alesa Monti, Floor Type CNC Horizontal Boring Mill, 6" Spindle, 475" X Travel, 128" Y, 40" Z, 20" W, 80" B, 360° C, 80" Rotary Table, ATC, Chip Conveyor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 9:00 AM
Industry: Generators & Engines
Description: Single phase , all good Transformers. To re-furbish: replace bushings- All fully operational on removal.
• 100kva- 3 units … [Read more...]
• 100kva- 3 units … [Read more...]
• 25kva-8 unit
• 50kva-14 units
•
13200 GRDY / 7620 EMCO and HOWARD industries
• 50kva-14 units
•
13200 GRDY / 7620 EMCO and HOWARD industries
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 8:45 AM
Industry: General Machinery & Equipment
Price: 9950
Description: SERIAL ............................... D-15372
SERIES ............................... MARVEL 15A … [Read more...]
SERIES ............................... MARVEL 15A … [Read more...]
MODEL ................................ 15A
CAPACITY ............................. 15" X 20"
BLADE SPEEDS, (VARIABLE) ............. 50 TO 400 FPM
BLADE FEED ........................... 0 TO 200 LBS.
HYDRAULIC RISE & FALL, HYDRAULIC ..... VARIABLE
WIDTH OF BLADE ....................... 1-1/4"
LENGTH OF BLADE ...................... 15'6"
10' AUTOMATIC STOCK FEED TABLE ....... 7,000# CAPACITY
CAPACITY ............................. 15" X 20"
BLADE SPEEDS, (VARIABLE) ............. 50 TO 400 FPM
BLADE FEED ........................... 0 TO 200 LBS.
HYDRAULIC RISE & FALL, HYDRAULIC ..... VARIABLE
WIDTH OF BLADE ....................... 1-1/4"
LENGTH OF BLADE ...................... 15'6"
10' AUTOMATIC STOCK FEED TABLE ....... 7,000# CAPACITY
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 8:13 AM
Industry: General Machinery & Equipment
Description: Trumpf Trumabend V130 CNC Hydraulic Press Brake
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 19, 2026 at 7:50 AM
Industry: General Machinery & Equipment
Description: Hurco VMX 30Ui 5 Axis Vertical Machining Center (2020)
5th Axis Trunnion, 40 ATC Side Mount, High Pressure Coolant Through Spindle, Chip Conveyor
5th Axis Trunnion, 40 ATC Side Mount, High Pressure Coolant Through Spindle, Chip Conveyor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 9:01 PM
Industry: General Machinery & Equipment
Price: best offer
Model: Vortex e1060V/8
Controller: Mazatrol Matrix 2 (19” LCD screen)
X axis travel: 1,875mm (Working travel: 1,335mm)
Y axis travel: 1,060mm
Z axis travel: 1,345mm
C axis indexing degree: 0.0001 degree
B axis indexing degree: 0.0001 degree
Pallet size: 1,000x1,000mm (2 APC)
Spindle speed: 10,000rpm
Spindle motor: 37KW (50HP)
BBT50/ 80ATC
X/Y/Z axis scale feedback system
X/Y/Z axis ball screw coolers
Touch sensor
Controller: Mazatrol Matrix 2 (19” LCD screen)
X axis travel: 1,875mm (Working travel: 1,335mm)
Y axis travel: 1,060mm
Z axis travel: 1,345mm
C axis indexing degree: 0.0001 degree
B axis indexing degree: 0.0001 degree
Pallet size: 1,000x1,000mm (2 APC)
Spindle speed: 10,000rpm
Spindle motor: 37KW (50HP)
BBT50/ 80ATC
X/Y/Z axis scale feedback system
X/Y/Z axis ball screw coolers
Touch sensor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 7:35 PM
Industry: Transformers
Description: Looking for a single phase 500kva pole mount transformer. 12000 vac primary, 240/480 secondary. Used, new or surplus ok.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 5:11 PM
Industry: Circuit Breakers
Description: 600 amp N3R main breaker Any Brand New Must take 175 , 150 and 125 amp
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 4:58 PM
Industry: Generators & Engines
Description: Looking to purchase used or reman 3406C industrial engine
345BHP @1800RPM "A" Rating
345BHP @1800RPM "A" Rating
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 4:05 PM
Industry: Transformers
Step up
padmount rental type
Multitap ideally
Please send pics and pricing of what you can offer
padmount rental type
Multitap ideally
Please send pics and pricing of what you can offer
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 3:40 PM
Industry: Other Electrical & Power Equipment
Description: We're looking for (qty. 6) PTs, preferably Arteche URJ-17, catalog 757061060. But we're open to anything that fits the same spec:
15 kV class, 110 kV BIL, 7,200/12,470GY primary, 120 V secondary, 60:1 ratio, 0.3 accuracy, 1,000–1,500 VA. … [Read more...]
15 kV class, 110 kV BIL, 7,200/12,470GY primary, 120 V secondary, 60:1 ratio, 0.3 accuracy, 1,000–1,500 VA. … [Read more...]
Known equivalents include Arteche URJR-17 (cat 757320009-H), RITZ VEF15-09 (cat 121531009.395003), and ITI PT5-110 722SS. We'll pay expedited freight if needed.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 3:29 PM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: (2 or 3) 2000-2500gpm @ 120' TDH centrifugal 100-175psi water pumps, 460/480vac, TEFC outdoor duty.
(2 or 3) 2000-2500gpm @ 60' TDH Immersion style 100 psi water pumps, 460/480vacTEFC outdoor duty … [Read more...]
(2 or 3) 2000-2500gpm @ 60' TDH Immersion style 100 psi water pumps, 460/480vacTEFC outdoor duty … [Read more...]
New/Used, Water pumps for a cooling water system, VFD ready
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 2:57 PM
Industry: General Machinery & Equipment
Description: Looking for Haas part number 20-1857A or 20-1857B. It's a discontinued bracket used to mount a tool changer to a GR712 machine. Trying to find either a drawing of this part, or a used one for sale.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 2:55 PM
Industry: General Machinery & Equipment
Description: Edge/FMB Turbo 5-65V/3800 Magazine-type Automatic Bar Feed, 12'6" Bar Length, 2.6" Max. Bar Diam., Hand-held Control, Left-hand Feed, Channel Set, Nose piece, Misc. Collets, Hyd. System, Manual, LOW USAGE, New 2019.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 2:53 PM
Industry: General Machinery & Equipment
Description: Omax Model 5555 Waterjet Machine, Omax Control, 55,000 PSI Pump, 55" x 54" Tavels, 65" x 80" Tank, 40 Hp, Tilt-a-Jet Head, Garnet Tank, Filters, Well Maintained, New 2008.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 2:28 PM
Industry: General Machinery & Equipment
Description: 2002 to 2005 Sodick AQ325L EDM, (this year and model only)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 1:39 PM
Industry: General Machinery & Equipment
Description: Gas Turbines ,Used or new 21 -35 MW similar to ie.TM2500 ,SRT -500-800 , GE vernova , truck transportable Aeroderivative . Qty 5 to 7 over 36 month period .
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 12:44 PM
Industry: General Machinery & Equipment
Budget: $50,001 - $100,000
Description: looking for 350 ton with Euro tooling 12' overall length.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 12:14 PM
Industry: General Machinery & Equipment
Description: Blansko SK-50A Dual Column CNC Vertical Boring Mill, 187” Table, 228” Swing, 120” Under Rail, Side Head, Siemens CNC
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 12:14 PM
Industry: Circuit Breakers
Description: Siemens cat# SLVBR4260G new or recon
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 12:13 PM
Industry: General Machinery & Equipment
Description: MVD 6Kw Laser, 5' x 10', Dual Pallet Shuttle Table, Dust Collector, Nesting Software, Camera Cutting Monitoring, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 12:10 PM
Industry: General Machinery & Equipment
Description: Quincy QSI-500 Air compressors. Rotary screw, well maintained with Pneumatech Air Dryer.
• Airflow Capacity: 500 CFM … [Read more...]
• Airflow Capacity: 500 CFM … [Read more...]
• Motor Power: 100 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 11:52 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 11:52 AM
Industry: General Machinery & Equipment
Description: Also looking for MT408 and similar
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 11:51 AM
Industry: General Machinery & Equipment
Capacity: 7/8"
Davenport Hybrid CNC control
Servo Driven Tooling
CNC subspindle / pick-off with X and Z control
Power Up Hours: 4,316
Davenport Hybrid CNC control
Servo Driven Tooling
CNC subspindle / pick-off with X and Z control
Power Up Hours: 4,316
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: August 18, 2026 at 11:31 AM
Industry: General Machinery & Equipment
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
