- English
- EspañolComing soon
Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: October 20, 2026 at 10:15 AM
Industry: General Machinery & Equipment
Description: Wanted New Britain screw machines Model 51 52 62 627 826
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 20, 2026 at 8:10 AM
Industry: Other Electrical & Power Equipment
Price: Looking for offer, loaded
Description: UNUSED (5) Eaton NOVA-TS recloser units. Each unit consists of a bank of three reclosers.
Most DOM 2023 … [Read more...]
Most DOM 2023 … [Read more...]
Manufacturer: Eaton / Cooper Power Systems
Model: NOVA-TS-15
Serial Numbers:
Unit 1
CP5720128811
CP5720128807
CP5720128812
Unit 2
CP5720128810
CP5720128809
CP5720128808
Unit 3
CP571468741
CP571415649
CP5720128806
Unit 4
CP5720131957
CP5720131958
CP5720128804
Unit 5
CP5720131959
CP571468742
CP5720128805
Located in Texas, photos available, looking for offer loaded.
Model: NOVA-TS-15
Serial Numbers:
Unit 1
CP5720128811
CP5720128807
CP5720128812
Unit 2
CP5720128810
CP5720128809
CP5720128808
Unit 3
CP571468741
CP571415649
CP5720128806
Unit 4
CP5720131957
CP5720131958
CP5720128804
Unit 5
CP5720131959
CP571468742
CP5720128805
Located in Texas, photos available, looking for offer loaded.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 20, 2026 at 7:35 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 20, 2026 at 7:28 AM
Industry: General Machinery & Equipment
SERIAL NUMBER: 6317-755
SPECIFICATIONS:
Number of Passes: 12
Line Direction: Right – Left
Spindle Diameter: 2″
Roll Space: 8″
Horizontal Centers: 12″
Vertical Adjustment: 1″
Base Top to Center Lower Spindle: 5″
Spindle Key Size: 3/8″
Gearing: Equal
EQUIPPED WITH:
Entry Guide
NOTE:
Complete mechanically
SPECIFICATIONS:
Number of Passes: 12
Line Direction: Right – Left
Spindle Diameter: 2″
Roll Space: 8″
Horizontal Centers: 12″
Vertical Adjustment: 1″
Base Top to Center Lower Spindle: 5″
Spindle Key Size: 3/8″
Gearing: Equal
EQUIPPED WITH:
Entry Guide
NOTE:
Complete mechanically
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 20, 2026 at 7:27 AM
Industry: General Machinery & Equipment
SERIAL NUMBER: 35193
YEAR: 07-07-1999
SPECIFICATIONS:
Maximum Coil Weight: 20,000 Lbs. per side
Maximum Coil Width: 48″
Maximum Coil O.D.: 72″
Mandrel Expansion Range: 18.5″ – 23.25″
EQUIPPED WITH:
Coil Car
(2) Hold Down Arms
Hydraulic Unit
Motorized Turret, Hydraulic
Motorized Feed, Hydraulic
Hydraulic Expansion & Contraction
YEAR: 07-07-1999
SPECIFICATIONS:
Maximum Coil Weight: 20,000 Lbs. per side
Maximum Coil Width: 48″
Maximum Coil O.D.: 72″
Mandrel Expansion Range: 18.5″ – 23.25″
EQUIPPED WITH:
Coil Car
(2) Hold Down Arms
Hydraulic Unit
Motorized Turret, Hydraulic
Motorized Feed, Hydraulic
Hydraulic Expansion & Contraction
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 20, 2026 at 7:27 AM
Industry: General Machinery & Equipment
Round: 1″ – 5″ (25 – 127 mm)
Square: 3-3/4″ (95 mm)
Rectangle: 2″ x 4″ (50 x 115 mm)
Maximum Wall: .165″ (4.2 mm)
Cut Tube Lengths: 4″ – 120″ (100 – 3000 mm)
Cut Tolerance: +/- .015″
Maximum Cycle Rate: 2200 per Hour
Line Direction: Left to Right
EQUIPPED WITH:
Push Button Controls
Hydraulic Unit
VICKERS Hydraulic Pump
BIJUR Central Grease System
Target Assembly
20′ Bundle Loader
Conveyor Table
(2) Runout Tables
BURRMASTER Deburr
Square: 3-3/4″ (95 mm)
Rectangle: 2″ x 4″ (50 x 115 mm)
Maximum Wall: .165″ (4.2 mm)
Cut Tube Lengths: 4″ – 120″ (100 – 3000 mm)
Cut Tolerance: +/- .015″
Maximum Cycle Rate: 2200 per Hour
Line Direction: Left to Right
EQUIPPED WITH:
Push Button Controls
Hydraulic Unit
VICKERS Hydraulic Pump
BIJUR Central Grease System
Target Assembly
20′ Bundle Loader
Conveyor Table
(2) Runout Tables
BURRMASTER Deburr
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 7:51 PM
Industry: General Machinery & Equipment
Description: Ooya #RE3-1600 Radial Arm Drill (This make and model only)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 5:27 PM
Industry: General Machinery & Equipment
Description: Bay-Lynx BC-1200 Beam Chambering Machine (Steel Processing)
Serious inquiry - look for a solid machine … [Read more...]
Serious inquiry - look for a solid machine … [Read more...]
This make and model only
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 5:21 PM
Industry: General Machinery & Equipment
Description: Bay-Lynx BC-1200 Beam Chamfering Machine (Steel Processing)
Serious inquiry - look for a solid machine … [Read more...]
Serious inquiry - look for a solid machine … [Read more...]
This make and model only
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 5:01 PM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: 357 Pega w/ 04 P.C CONTROL
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 3:11 PM
Industry: Motors - A.C. & D.C.
Description: 75hp dc 366AT t36r8007
photo attached with name plate
photo attached with name plate
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 2:47 PM
Industry: General Machinery & Equipment
Price: 3000.
Description: 4 ft. wide powered sheet metal rolls in great condition. 1hp/3ph motor runs on single phase 120v/20a with attached 3ph converter. Capacity up to 48" x 16ga. steel, but has been used only for aluminum work since bought new. Very portable with attached steel rollers or could be permanently bolted to floor.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 1:25 PM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: looking for a 10' 1/4" Hydraulic shear wants Cincinnati
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 1:20 PM
Industry: General Machinery & Equipment
Price: Best Offer
Description: We have 4 ABB IRB-260 robots complete with IRC5 control cabinets. These were new in 2007 and have not been in use since 2021. Looking for a quick sale to remove from inventory.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 11:29 AM
Industry: General Machinery & Equipment
Description: Powdercoat 'Batch' setup w/ wash bay, oven, powdercoat booth w/ multiple color setup, beautiful unit, installed 2 years ago, need to move ASAP.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 10:44 AM
Industry: General Machinery & Equipment
Description: Poreba, Model TR-100B, Heavy Duty Gap Bed Engine Lathe, 42" Swing, 49" Swing in Gap, 20'9" Centers, 630 RPM, 4.25" Spindle Bore, 36" 4-Jaw, (2) 25" Steadies, Inch/Metric
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 10:42 AM
Industry: General Machinery & Equipment
Description: DTI Hogger II, Table Dia. 100", Swing 112", Work Ht-U/R 35", 2 Ram Heads, 160 hp, 180 RPM, Fanuc 18-iT, 60 ATC, Full Enclosure, Chip Conveyor, High Pressure Coolant,
New 2007
New 2007
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 10:42 AM
Industry: General Machinery & Equipment
Description: 2002 OKUMA IMPACT LU-35 2ST - 850 CNC LATHE 4-Axis Turning Center with Tailstock. Okuma OSP-P-100U CNC Conversational Control. This Machine has a Immediate Release and is in Very Good Condition with All Options for Under Power for Inspections Excellent for Between Centers Parts with Lower Turret can also be a Steady Rest Capability or Larger Chucking Applications. Machine has Excellent Rohm 18" 3-Jaw Scroll Chuck Excellent Set Correct Torque
on Part Especially Ring Turning Applications.
on Part Especially Ring Turning Applications.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 10:20 AM
Industry: General Machinery & Equipment
Description: Desiccant dryer with the ability to dry 100-200 lbs of plastic resin an hour, 230 volts.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 19, 2026 at 9:55 AM
Industry: General Machinery & Equipment
Description: Haas GR-510 CNC Router
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 18, 2026 at 6:19 PM
Industry: General Machinery & Equipment
Description: Looking for a 22” flywheel grinder for tractor diesel engine
Good used or new
Good used or new
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 18, 2026 at 4:54 PM
Industry: General Machinery & Equipment
-105’ RUNWAY (ROUGH)
-The highest point of the entire crane set up cannot exceed 255” in Height
-The highest point of the entire crane set up cannot exceed 255” in Height
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 18, 2026 at 2:22 PM
Industry: General Machinery & Equipment
Model: 54” Cutmaster
Serial Number: 28242
54” Diameter 4-Jaw
Chuck with Bullard Two Piece Top
Jaws
62” Maximum Swing
44” Height Under Rail
( 1 ) 5 Position Turret Head
( 1 ) Heavy Duty Boring Ram
Pendant Control 0-160 RPM
Floor Standing
Currently 240 Volt
Transformer for 480 if Needed
Videos Available
Available under Power in Houston
Condition….. Excellent
Rare to find one this Nice .
Serial Number: 28242
54” Diameter 4-Jaw
Chuck with Bullard Two Piece Top
Jaws
62” Maximum Swing
44” Height Under Rail
( 1 ) 5 Position Turret Head
( 1 ) Heavy Duty Boring Ram
Pendant Control 0-160 RPM
Floor Standing
Currently 240 Volt
Transformer for 480 if Needed
Videos Available
Available under Power in Houston
Condition….. Excellent
Rare to find one this Nice .
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 18, 2026 at 7:30 AM
Industry: General Machinery & Equipment
Price: $2,550
Description: 1986 DOALL G-612M SURFACE GRINDER, 6" X 12" CAPACITY, 3,450 RPM SPINDLE
- EZ Stock Number: EZ172 … [Read more...]
- EZ Stock Number: EZ172 … [Read more...]
- 230 volt, 3 phase, 60 cycle, 2.6 amps electrics
- main motor: 1 hp
- 6" x 12" capacity
- manual feed
- spindle specs: model: md-5
- spindle specs: serial no.: 298
- Used machine located in Eugene, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
- main motor: 1 hp
- 6" x 12" capacity
- manual feed
- spindle specs: model: md-5
- spindle specs: serial no.: 298
- Used machine located in Eugene, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 17, 2026 at 6:50 PM
Industry: Other Electrical & Power Equipment
Budget: $10,001 - 50,000
Description: Carrier WeatherMaker 15 Ton 300,000 BTU 10.8 EER Commercial Gas Packaged Unit | 460V 3 Phase - R454B - Two Stage or equalivant.... 4 units
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 17, 2026 at 3:38 PM
Industry: Motors - A.C. & D.C.
Description: SEW EURODRIVE FAF157DV180M4 ,,, 10-20 RPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 17, 2026 at 1:31 PM
Industry: General Machinery & Equipment
Price: $1,500
Description: 1960 SUNNEN LBA 575 HONING MACHINE WITH EXTENSIVE TOOLING
- EZ Stock Number: EZ170 … [Read more...]
- EZ Stock Number: EZ170 … [Read more...]
- serial #: 61290
- country: united states
- oem: sunnen products company
- 115 volt, 1 phase, 60 cycle, 6.0 amps electrics
- main motor: 1/3 hp, 1725 rpm
- spindle rpm: 300 - 450
- Used machine located in Salem, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
- country: united states
- oem: sunnen products company
- 115 volt, 1 phase, 60 cycle, 6.0 amps electrics
- main motor: 1/3 hp, 1725 rpm
- spindle rpm: 300 - 450
- Used machine located in Salem, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 17, 2026 at 7:40 AM
Industry: Generators & Engines
Price: $8,500 or best offer
Description: Unused Deutz BF4L913-series 4-cylinder turbo air-cooled diesel in original crate; military utility spare. Inventory: 913 series, serial 8380594, year 1995; owner confirms turbo. Exact suffix, HP and fitment unverified. Zero hours reported; stored surplus, no run test or factory warranty. Inspection welcome. Spiro, OK 74959; buyer pays pickup/freight. Image is a manufacturer reference illustration, not the actual engine.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 17, 2026 at 7:30 AM
Industry: General Machinery & Equipment
Price: $4,650
Description: MILLER ELECTRIC MFG CP-302 WELDING MACHINE W/ WIRE FEEDER, 100% @ 300 AMPS
- EZ Stock Number: EZ575 … [Read more...]
- EZ Stock Number: EZ575 … [Read more...]
- 200-230- 460 volt, 3 phase, 60 cycle electrics
- voltage output: 14-44 dc
- duty cycle: 100% @ 300 amps
- adjustable weld stabilizer
- presettable voltage
- 14-pin receptacle for accessory connection
- Used machine located in Eugene, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
- voltage output: 14-44 dc
- duty cycle: 100% @ 300 amps
- adjustable weld stabilizer
- presettable voltage
- 14-pin receptacle for accessory connection
- Used machine located in Eugene, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 17, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Description: pneumatic handling components, air float working surface, longitudinal and cross breakout bars, glass position sensing, industrial computer controls, and cutting optimization software. Maximum glass size: 157 x 102 in. (4,000 x 2,600 mm); glass thickness: 2–19 mm; cutting speed: up to 200 m/min; cutting accuracy: ±0.15 mm; adjustable working height: 890–960 mm; rated power: 8 kW;
Includes companion Vetromac BT 40-28 glass breakout and transfer table with powered handling and air-float support.
Includes companion Vetromac BT 40-28 glass breakout and transfer table with powered handling and air-float support.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 17, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Description: MIG welding cell featuring FANUC ARC Mate 100iB 6axis robot with approx 6kg payload & 1,373-mm reach
FANUC R-J3iB controller & teach pendant, Lincoln Electric Power Wave-series welding power source, Lincoln wire feeder, Tough Gun robotic MIG torch, welding-wire drum feed system, dual perforated steel fixture tables with pneumatic workholding fixtures, air preparation & valve components, operator pushbutton stations, emergency stops, electrical disconnect cabinet, safety enclosure
FANUC R-J3iB controller & teach pendant, Lincoln Electric Power Wave-series welding power source, Lincoln wire feeder, Tough Gun robotic MIG torch, welding-wire drum feed system, dual perforated steel fixture tables with pneumatic workholding fixtures, air preparation & valve components, operator pushbutton stations, emergency stops, electrical disconnect cabinet, safety enclosure
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 17, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Description: 72" left to right x 36" front to back T slotted bed
Equipped with press control cabinet, light curtain guarding, die area guarding and CWP coil feed equipment. … [Read more...]
Equipped with press control cabinet, light curtain guarding, die area guarding and CWP coil feed equipment. … [Read more...]
1CWP 4R-24 single-end pull-off coil reel: 6,500-lb. max coil weight, 24" max stock width, 60" max coil OD, 13–17"standard mandrel expansion range plus removable pads for 17–21" coil ID, right to left payout direction, manual mandrel expansion, pneumatic spindle brake requiring 80–100 PSI. CWP 12B powered stock straightener
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 17, 2026 at 2:25 AM
Industry: General Machinery & Equipment
Budget: Over $100,000
Description: Used RENDER TM6000R milling machine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 9:16 PM
Industry: Circuit Breakers
Description: Looking for a square D QOC 30MW 225F cover
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 3:18 PM
Industry: General Machinery & Equipment
Description: Yaskawa Motoman MA-1900 Robotic Welding Cell, With Yaskawa type YR-MA01900-A00 6-Axis Robot with 75" Reach, 3Kg Payload Capcity, Yaskawa DX100 Control, Miller Auto Axcess 300 DI Welding Power Supply, Hand-held Welder Remote, (2) Work/Fixture Tables Mounted on a Turn-table for Separate Set-up and Welding Cells, Video Available, LOW USAGE, New 2012.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 3:15 PM
Industry: General Machinery & Equipment
Description: Feeler HV-800 CNC Vertical Machining Center, Fanuc 0i-MD 5-Axis Control, Remote MPG, 15,000 RPM, BT-40 Taper, Big-Plus Spindle Nose, 31.5"X, 20.5"Y, 19.9"Z, 20.5" x 37.4" Table, 30Hp Direct Drive Spindle, 30 Station ATC, Tsudakoma TN-161 Tilting Rotary Table w/5C Collet Chuck, Chip Augers & Conveyor, Coolant System, Spindle Oil Chiller, Manual, New 12*2013.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 3:13 PM
Industry: General Machinery & Equipment
Description: Edge/FMB Turbo 5-65V/3800 Magazine-type Automatic Bar Feed, 12'6" Bar Length, 2.6" Max. Bar Diam., Hand-held Control, Left-hand Feed, Channel Set, Nose piece, Misc. Collets, Hyd. System, Manual, LOW USAGE, New 2019.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 3:11 PM
Industry: Generators & Engines
Description: Looking for 2 New 1500kW Diesel Generator Sets 480V
No brand preference. Standby Rated.
No brand preference. Standby Rated.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 2:13 PM
Industry: Circuit Breakers
Description: VB1H 5KV 350 MVA 41 KA GE BREAKER CLOSE 240V AC TRIP 125VDC
HOT ITEM
HOT ITEM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 1:33 PM
Industry: General Machinery & Equipment
Description: Morando K60, 21' Vertical Boring Mill, 100 HP, 0.2 - 20 RPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 1:32 PM
Industry: General Machinery & Equipment
Description: 4" Tos W100A Horizontal Boring Mill, 44” Vertical, 63” Cross, 49” Saddle, Facing Head, Tail Sock, Tooling, 49” x 49” Built In Power Rotary Table, 4 Axis DRO
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 1:30 PM
Industry: General Machinery & Equipment
Price: $7,000
Description: 1980 YCI YCM-16VS CNC MILLING 49" X 9" TABLE 60-4200 RPM SPINDLE
- EZ Stock Number: EZ380 … [Read more...]
- EZ Stock Number: EZ380 … [Read more...]
- year: 1980
- status: for sale
- serial #: 0045884
- country: united states
- 220-440 volt, 3 phase, 60 cycle, 8.5-4.2 amps electrics
- main spindle: 3 hp, 1720
- Used machine located in Eugene, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
- status: for sale
- serial #: 0045884
- country: united states
- 220-440 volt, 3 phase, 60 cycle, 8.5-4.2 amps electrics
- main spindle: 3 hp, 1720
- Used machine located in Eugene, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 12:14 PM
Industry: Circuit Breakers
Description: new from factory BABA 500 KVA 480 to 208-120
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 10:49 AM
Industry: General Machinery & Equipment
Price: 4200
Description: Knuth SSB 40 F Super geared-head floor drill press. Used. 220V 3-phase, 60 Hz. Motor: 2.7 HP, 8.4 A. Approx. 1,100 lb (manufacturer spec). Last used about 2 years ago; not powered on since 2024. Sold as-is, no warranty. New lists around $15,900. $4,200. Molino, FL 32577. Forklift loading available; buyer arranges transport. Cash or verified payment only. Serious inquiries only.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 10:42 AM
Industry: General Machinery & Equipment
Price: 2250
Description: 14" x 40" gap-bed engine lathe, Jinan JMT360 x 1000 (Acra-Turn JFMT 360 type). 240V 3-phase. About 2,900 lb. Never set up or run; untested. Sold as-is, no warranty. $2,250. Molino, FL 32577. Forklift loading available; buyer arranges transport. Cash or verified payment only. Serious inquiries only.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 9:47 AM
Industry: Other Electrical & Power Equipment
Description: Looking for three 1200A 480V automatic transfer switches, indoor or outdoor rated. Let me know what you have with some detail, thank you.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 9:12 AM
Industry: Processing Equipment
Description: Good morning,
My name is Justin, and I’m with Keystone Equipment. We have Paul Mueller 10,000-gallon Model F reactors available for purchase. Inspection is available. … [Read more...]
My name is Justin, and I’m with Keystone Equipment. We have Paul Mueller 10,000-gallon Model F reactors available for purchase. Inspection is available. … [Read more...]
Equipment specifications
Capacity: 10,000 gallons nominal; 9,906.4 gallons at indicated level
Construction: 316L stainless steel product vessel with a 304 stainless steel outer shell
Pressure rating: Vessel rated at 110 PSIG at 325°F and full vacuum; heating surface rated at 120 PSIG at 325°F
Dimensions: 120-inch vessel inside d
Capacity: 10,000 gallons nominal; 9,906.4 gallons at indicated level
Construction: 316L stainless steel product vessel with a 304 stainless steel outer shell
Pressure rating: Vessel rated at 110 PSIG at 325°F and full vacuum; heating surface rated at 120 PSIG at 325°F
Dimensions: 120-inch vessel inside d
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 7:30 AM
Industry: General Machinery & Equipment
Price: $65,000
Description: 2022 SOUTHWESTERN INDUSTRIES TRAK TMC7 CNC MILLING 8,000 RPM, 16 ATC, 4TH-AXIS
- EZ Stock Number: EZ334 … [Read more...]
- EZ Stock Number: EZ334 … [Read more...]
- prototrak/rmx cnc control
- table size: 35.43" x 19.69"
- max. wp weight: 1,000 lbs
- x-axis travel: 30
- y-axis travel: 20
- z-axis travel: 20
- Used machine located in East of Seattle, WA
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
- table size: 35.43" x 19.69"
- max. wp weight: 1,000 lbs
- x-axis travel: 30
- y-axis travel: 20
- z-axis travel: 20
- Used machine located in East of Seattle, WA
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Description: 4" stroke, 13-1/4" shut height, 3" slide adjustment, 32" x 21" bed, 21" x 16" slide area & approx 100 SPM
Auxiliary equip includes ServoMax SE powered servo roll feed with pneumatic lift cylinders and adjustable strip guide, roller infeed/support table & powered inclined parts/scrap discharge conveyor with roller-chain bed and Lovejoy/ROSTA drive components. … [Read more...]
Auxiliary equip includes ServoMax SE powered servo roll feed with pneumatic lift cylinders and adjustable strip guide, roller infeed/support table & powered inclined parts/scrap discharge conveyor with roller-chain bed and Lovejoy/ROSTA drive components. … [Read more...]
These are U.S. machines currently located in Mexico, the seller is helping make their return to the U.S. easier & less costly. DUTY FREE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Description: 52 × 100- n. (1,320 × 2,540-mm) working area; 150 watt Kern KT150 liquid cooled, metal cavity, super pulsed CO₂ laser source, flying optics, servo driven gantry; 3". material clearance, max cutting speed 10 in./sec.; maximum engraving speed 100 in./sec.; positioning accuracy ±0.002 in./ft.; repeatability ±0.0005 in./ft.; honeycomb cutting bed; air-assist cutting head; knife air and nozzle air regulators; KLM6 laser monitor/controller; machine electrical requirements 208/230 VAC, single phase
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Description: 500-kN bending force (approximately 55 US tons), 2,050-mm (80.7-inch) working length, and 290-mm (11.4-inch) ram stroke. Equipped with TS1 touchscreen CNC control workstation with keyboard and monitor, CNC backgauge system with four adjustable gauging fingers, Wilson Tool sectional punch holders and installed upper and lower press-brake tooling
These are U.S. machines currently located in Mexico and the seller is helping make their return to the U.S. easier and less costly. DUTY FREE!
These are U.S. machines currently located in Mexico and the seller is helping make their return to the U.S. easier and less costly. DUTY FREE!
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 16, 2026 at 2:38 AM
Industry: General Machinery & Equipment
Price: best offer
Model: SPEEDIO F600X1
Controller: CNC C00(WX)
X/Y/Z axis travel: 600/400/350mm
Spindle nose to table surface: 200-550mm
Table size: 800x400mm
Table loading: 400kgs
Spindle speed: 10,000rpm
BT30 / 22ATC
With YUKIWA rotary table
Machine weight: 3,600kgs
Controller: CNC C00(WX)
X/Y/Z axis travel: 600/400/350mm
Spindle nose to table surface: 200-550mm
Table size: 800x400mm
Table loading: 400kgs
Spindle speed: 10,000rpm
BT30 / 22ATC
With YUKIWA rotary table
Machine weight: 3,600kgs
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 6:36 PM
Industry: General Machinery & Equipment
Description: 88 Ton x 8' Amada FBD-8025NT Press Brake, 2000 or Newer, Must Have 'NT' Control, Will Also Consider RGM2, HFEM2, HD, HDS, or HG Models, 6'-8' Bed Length
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 2:46 PM
Industry: General Machinery & Equipment
Price: Make Offer
Distance Between Centers: 60"
Mfg. No. 7659
Year: 3//1940
24" 4-Jaw Chuck
15 HP Motor
17-303 RPM
Mfg. No. 7659
Year: 3//1940
24" 4-Jaw Chuck
15 HP Motor
17-303 RPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 2:43 PM
Industry: General Machinery & Equipment
Description: MVD 6Kw Laser, 5' x 10', Dual Pallet Shuttle Table, Dust Collector, Nesting Software, Camera Cutting Monitoring, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 2:42 PM
Industry: General Machinery & Equipment
Description: Quincy QSI-500 Air compressors. Rotary screw, well maintained with Pneumatech Air Dryer.
• Airflow Capacity: 500 CFM … [Read more...]
• Airflow Capacity: 500 CFM … [Read more...]
• Motor Power: 100 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 2:11 PM
Industry: Motors - A.C. & D.C.
Description: Looking for surplus Reliance 5005S frame, 200 HP, 460 VAC, 885 RPM BB motor.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 2:08 PM
Industry: General Machinery & Equipment
Description: 22" x 80" up to 120" clausing colchester lathe in excellent condition, prefer Midwest area. Only that brand, nothing else so please do not quote other brands .
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 2:05 PM
Industry: General Machinery & Equipment
Description: Looking for a used Sharp or equivalent model RD-2500 heavy duty radial drill , 22" column, 98" column to spindle center, 10 hp , must be in very good condition.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 2:03 PM
Industry: General Machinery & Equipment
Price: $15000
Description: Guspro burn off oven. 8ft x 8ft with heavy duty cart.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:59 PM
Industry: General Machinery & Equipment
Coil handling package: SMX24 powered coil reel/uncoiler, S/N SMX24-11-02, rated for 24 in. stock width and .093-in. mild-steel thickness, 55.75-in. pass line
P/A Industries powered roll feed/straightener with pneumatic components, infeed supports, lubrication unit and control pendant
These are U.S. machines currently located in Mexico and the seller is helping make their return to the U.S. easier & less costly. DUTY FREE
P/A Industries powered roll feed/straightener with pneumatic components, infeed supports, lubrication unit and control pendant
These are U.S. machines currently located in Mexico and the seller is helping make their return to the U.S. easier & less costly. DUTY FREE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:54 PM
Industry: General Machinery & Equipment
14" slide
120 x 60" bed & slide areas
variable operating speed of 25–50 SPM
Air clutch/brake, counterbalance system, powered slide adjustment, T slotted bolster, die lift/rolling bolster components, pneumatic regulators, auto lubrication, guarded flywheel & drive, operator controls, dual palm station, safety light curtains
These are U.S. machines currently located in Mexico and the seller is helping make their return to the U.S. easier and less costly. DUTY FREE
120 x 60" bed & slide areas
variable operating speed of 25–50 SPM
Air clutch/brake, counterbalance system, powered slide adjustment, T slotted bolster, die lift/rolling bolster components, pneumatic regulators, auto lubrication, guarded flywheel & drive, operator controls, dual palm station, safety light curtains
These are U.S. machines currently located in Mexico and the seller is helping make their return to the U.S. easier and less costly. DUTY FREE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:48 PM
Industry: General Machinery & Equipment
Description: 7,320mm (288.2".) X axis
7,000mm (275.6"./22' 11.6") usable working/bed length … [Read more...]
7,000mm (275.6"./22' 11.6") usable working/bed length … [Read more...]
1,040 mm Y axis
430mm Z axis
220 × 250mm profile working envelope
-15° to +195°A axis
100 m/min X axis rapid
8 independently positionable pneumatic clamps/vices
10 total ISO 30 tool positions consisting of a seven position magazine plus three positions on the machining head
These are U.S. machines currently located in Mexico and the seller is helping make their return to the U.S. easier and less costly. DUTY FREE!
430mm Z axis
220 × 250mm profile working envelope
-15° to +195°A axis
100 m/min X axis rapid
8 independently positionable pneumatic clamps/vices
10 total ISO 30 tool positions consisting of a seven position magazine plus three positions on the machining head
These are U.S. machines currently located in Mexico and the seller is helping make their return to the U.S. easier and less costly. DUTY FREE!
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:30 PM
Industry: General Machinery & Equipment
Price: $1,650
Description: FADAL VH65 4TH-AXIS ROTARY TABLE, 6"-12" FACEPLATE
- EZ Stock Number: EZ425 … [Read more...]
- EZ Stock Number: EZ425 … [Read more...]
- function: 4th-axis rotary table
- faceplate: 6" - 12"
- Used machine located in Portland, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
- faceplate: 6" - 12"
- Used machine located in Portland, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:28 PM
Industry: Motors - A.C. & D.C.
Description: MULTIAX SAC OF NIDEC BRAND
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:18 PM
Industry: General Machinery & Equipment
Price: 41000
Description: Used 150 hp OZEN OASC-D-USD Drive / Like New / Low Hours / 460 VOLT
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:09 PM
Industry: General Machinery & Equipment
Description: Used pass-through lathe 4"-6" x 6-8' bed
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:09 PM
Industry: General Machinery & Equipment
Description: Used 6' radial arm drill with 1/2" thickness and countersinks up to a 1 1/2"
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:06 PM
Industry: General Machinery & Equipment
Description: 2-Sided Lapping Machines. AC1000 Peter Wolters or larger size. Would consider 16B Speedfam or larger size also. Must be nice and complete. 1990's or newer
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:05 PM
Industry: General Machinery & Equipment
Description: 96" Lapmaster, complete and good shape, newer style.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:04 PM
Industry: General Machinery & Equipment
Description: 36" or 48" Lapmaster, open face style, no pneumatics, complete and nice, 1980's or newer.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 1:03 PM
Industry: Circuit Breakers
Description: Please quote the following new Eaton breakers and availability. Thanks Pat
Eaton GHB2100 2 pole 100A (QTY 1) … [Read more...]
Eaton GHB2100 2 pole 100A (QTY 1) … [Read more...]
Eaton GHB3080 3 pole 80A (QTY 2)
Eaton GHB3070 3 pole 70A (QTY 1)
Eaton GHB 3030 3 pole 30A (QTY 1)
Eaton GHB3115 3 pole 15A (QTY 1)
Eaton GHB2050 2 pole 50 (QTY 1)
Eaton GHB3070 3 pole 70A (QTY 1)
Eaton GHB 3030 3 pole 30A (QTY 1)
Eaton GHB3115 3 pole 15A (QTY 1)
Eaton GHB2050 2 pole 50 (QTY 1)
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 12:55 PM
Industry: General Machinery & Equipment
Description: For our client, we are seeking a replacement wound-rotor AC motor for a mill application. Specifications: 300 hp, stator 440 volts/400 amps, rotor 360 volts/372 amps, 440 rpm, 60 Hz. The unit is an older-model Allis-Chalmers motor.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 12:33 PM
Industry: Generators & Engines
Description: Diesel fuel tank - 15,000 to 20,000 gal double wall UL listed
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 12:03 PM
Industry: General Machinery & Equipment
Description: Amada Press Brake 130 Ton x 10', Tooling/Dies. Would be a huge plus
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 11:27 AM
Industry: General Machinery & Equipment
Description: Haas Model VF-2 CNC Vertical Machining Center, Haas CNC Control, Haas HA5C 4th Axis Indexer, 30"X, 16"Y, 20"Z, 14" x 36" Table, CAT-40 Taper, 7,500 RPM, 20-Station, Carousel-type ATC, 20Hp Vector Drive, Programmable Coolant Nozzle, 710 IPM Rapids, Brushless Servos, Rigid Tapping, New 1998.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 11:23 AM
Industry: General Machinery & Equipment
Description: Edge/FMB Turbo 5-65V/3800 Magazine-type Automatic Bar Feed, 12'6" Bar Length, 2.6" Max. Bar Diam., Hand-held Control, Left-hand Feed, Channel Set, Nose piece, Misc. Collets, Hyd. System, Manual, LOW USAGE, New 2019.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 11:22 AM
Industry: General Machinery & Equipment
Description: Feeler HV-800 CNC Vertical Machining Center, Fanuc 0i-MD 5-Axis Control, Remote MPG, 15,000 RPM, BT-40 Taper, Big-Plus Spindle Nose, 31.5"X, 20.5"Y, 19.9"Z, 20.5" x 37.4" Table, 30Hp Direct Drive Spindle, 30 Station ATC, Tsudakoma TN-161 Tilting Rotary Table w/5C Collet Chuck, Chip Augers & Conveyor, Coolant System, Spindle Oil Chiller, Manual, New 12*2013.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 10:56 AM
Industry: General Machinery & Equipment
Budget: Over $100,000
Description: Looking for an industrial oven (large) for heating/drying precast refractory shapes. Large means 15 ft x 12 ft x (20 to 40 ft)
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 10:41 AM
Industry: General Machinery & Equipment
Description: Used radial arm drill capable of countersinking stainless steel.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 10:28 AM
Industry: Generators & Engines
Price: $13,000
4889 Jaybird Circle North
Jacksonville, FL. 32257
(904)860-3516
Standby Takeout Generac Dual Fuel - Diesel / Nat Gas
750kw, 480 volt (Two 375kw Mitsubishi generators in parallel)
Control panel
Circuit breaker
Fuel tank base (double wall 1426 Gal.)
Radiator cooled
Sound attenuated enclosure
Model No. MB0750
Serial number: 2089501
2006 model year
Last serviced: At 570 hours
3/20/2026
Approximately 575 total hours since new
Dealer net $13,000
FOB Jacksonville FL
Jacksonville, FL. 32257
(904)860-3516
Standby Takeout Generac Dual Fuel - Diesel / Nat Gas
750kw, 480 volt (Two 375kw Mitsubishi generators in parallel)
Control panel
Circuit breaker
Fuel tank base (double wall 1426 Gal.)
Radiator cooled
Sound attenuated enclosure
Model No. MB0750
Serial number: 2089501
2006 model year
Last serviced: At 570 hours
3/20/2026
Approximately 575 total hours since new
Dealer net $13,000
FOB Jacksonville FL
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 10:05 AM
Industry: Transformers
Description: Ite switchgear see photo
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 9:36 AM
Industry: Processing Equipment
Description: Admix induction cart, with shear mill
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 9:09 AM
Industry: General Machinery & Equipment
Description: I need a Flange Stacker that will work on a Franklin Model PF196x425RM Flange Line
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 9:08 AM
Industry: Circuit Breakers
Description: EATON TC-50 transformer controller, PN: 66D2232G02
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 9:08 AM
Industry: General Machinery & Equipment
Price: 24500
Description: SERIAL ................................. P35-125
MODEL .................................. 1238 … [Read more...]
MODEL .................................. 1238 … [Read more...]
CAPACITY, MILD STEEL ................... 3/8"
CAPACITY, STAINLESS STEEL .............. 9/32"
CUTTING LENGTH ......................... 144"
NUMBER OF HOLD DOWNS ................... 19
FRONT OPERATED POWER BACKGAUGE ......... 36"
SQUARING ARM ........................... 10'
FRONT ARM SUPPORTS ..................... (4) 30"
STROKES PER MINUTE ..................... 40
MAIN MOTOR, HORSEPOWER ................
CAPACITY, STAINLESS STEEL .............. 9/32"
CUTTING LENGTH ......................... 144"
NUMBER OF HOLD DOWNS ................... 19
FRONT OPERATED POWER BACKGAUGE ......... 36"
SQUARING ARM ........................... 10'
FRONT ARM SUPPORTS ..................... (4) 30"
STROKES PER MINUTE ..................... 40
MAIN MOTOR, HORSEPOWER ................
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 8:47 AM
Industry: Circuit Breakers
Budget: $10,001 - 50,000
Description: looking for a Qty(2) Square D NW50, 100KAIC. We can reconfigure to meet needs but need it to be 100KAIC at a minimum.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 8:41 AM
Industry: Circuit Breakers
Price: Looking for offer
Serial: MDN6163XEA161QAWN4Y
BREAKER,CIRCUIT, LOW VOLTAGE, 480VAC, 3 POLE, 1600AMP, 65KA IC, 50/60HZ, MAGNUM DS
Eaton 3 Pole 480VAC Low Voltage Circuit Breaker
Magnum DS MDN608
Serial: MDN6083XEA081QAWAN4Y
Description: BREAKER,CIRCUIT, LOW VOLTAGE, 480VAC, 3 POLE, 800AMP, 50/60HZ
Located in Louisiana, unused, photos available, looking for offer laoded.
BREAKER,CIRCUIT, LOW VOLTAGE, 480VAC, 3 POLE, 1600AMP, 65KA IC, 50/60HZ, MAGNUM DS
Eaton 3 Pole 480VAC Low Voltage Circuit Breaker
Magnum DS MDN608
Serial: MDN6083XEA081QAWAN4Y
Description: BREAKER,CIRCUIT, LOW VOLTAGE, 480VAC, 3 POLE, 800AMP, 50/60HZ
Located in Louisiana, unused, photos available, looking for offer laoded.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 7:30 AM
Industry: General Machinery & Equipment
Price: $18,500
Description: 2006 BROTHER INDUSTRIES TC-32B QT 16,000 RPM SPINDLE, 2-PALLET CHANGER, 3-AXIS
- EZ Stock Number: EZ541 … [Read more...]
- EZ Stock Number: EZ541 … [Read more...]
- year: 2006
- 230 volt, 3 phase, 50-60 cycle, max. 37 kva electrics
- spindle motor: 7.3 kw (10 hp)
- 3-axis w/ cnc boo/bo controls
- 2-pallet changer
- spindle speed: 16,000 rpm
- Used machine located in Portland, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
- 230 volt, 3 phase, 50-60 cycle, max. 37 kva electrics
- spindle motor: 7.3 kw (10 hp)
- 3-axis w/ cnc boo/bo controls
- 2-pallet changer
- spindle speed: 16,000 rpm
- Used machine located in Portland, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 7:23 AM
Industry: Motors - A.C. & D.C.
Description: Hi,
Please send me the price, lead time and data sheet nameplate for below motor if you have it available. … [Read more...]
Please send me the price, lead time and data sheet nameplate for below motor if you have it available. … [Read more...]
1 Qty 150HP / 112kW, 447T Frame, 480V, 3ph, 60Hz, 1182 RPM, S.F 1.15, TEFC, CONT., F class, Design B, KVA Code G, 40 Dec C, Eff 95, 6318.C3 front bearing, NU320 Bearing.
Let me know if you have any questions.
Thank You,
Let me know if you have any questions.
Thank You,
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 2:26 AM
Industry: Processing Equipment
Description: Inline Vapour Phase Oven(for SMT)
The CX600 has been maintained exclusively with original IBL parts throughout its service life. … [Read more...]
The CX600 has been maintained exclusively with original IBL parts throughout its service life. … [Read more...]
The machine’s outer and inner surfaces are in good condition, with no structural damage. Used. Ask for specification!
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 15, 2026 at 12:10 AM
Industry: General Machinery & Equipment
Description: Cosen 650 MNC Band Saw with Approx. 15" or larger Diameter Rounds, Mitering
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 14, 2026 at 5:31 PM
Industry: General Machinery & Equipment
Description: Mitutoyo Crysta-Plus M7106 CMM Coordinate Measuring Machine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 14, 2026 at 3:25 PM
Industry: Generators & Engines
Description: We’re looking for the following NEW Caterpillar generator sets:
• Caterpillar C4.4 – 100 kW … [Read more...]
• Caterpillar C4.4 – 100 kW … [Read more...]
• Caterpillar C9 – 300 kW
Both must be brand new, with 0 hours and a factory warranty. Caterpillar only—no substitutions.
Please let us know what you have available, along with pricing, specifications, and lead times.
Both must be brand new, with 0 hours and a factory warranty. Caterpillar only—no substitutions.
Please let us know what you have available, along with pricing, specifications, and lead times.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 14, 2026 at 2:55 PM
Industry: Other Electrical & Power Equipment
Price: Best Offer
Description: These tanks have never been used but have sat under an over hang for some time now. They are used in some industrial and hotel settings to keep extra water hot and available. These are not water heaters but they are water holding tanks and can maintain tempertature for extra water that is needed on demand. Lochinvar model GVG0200JR. Make me an offer! We need the warehouse space!
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 14, 2026 at 2:41 PM
Industry: Motors - A.C. & D.C.
Price: Best offer
Description: New! Never used Century AC 3 Phase motor. Make me an offer! We can make a deal!
Frame-S254T. … [Read more...]
Frame-S254T. … [Read more...]
Type: MOGB
Volts: 230/460
HP: 15
Duty: CONT
Code: G
Nom. PF: 80.0
Volts: 230/460
HP: 15
Duty: CONT
Code: G
Nom. PF: 80.0
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 14, 2026 at 2:03 PM
Industry: General Machinery & Equipment
Description: HEM DPM25/144 CCT 25" x 25" x 12' Lengths, Infeed and Outfeed Conveyors, Blade size: 19' 10" L × 1.5" H × .050", Computer Table Control, Chip Conveyor, 20HP, 220/440
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 14, 2026 at 1:36 PM
Industry: Circuit Breakers
Description: Looking for (1) VB1-13.8-500-3 2000A 125VDC control preferred
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 14, 2026 at 1:30 PM
Industry: General Machinery & Equipment
Price: $42,000
Description: 2021 SOUTHWESTERN INDUSTRIES TRAK TMC7 CNC MILL 30"X20"X20" TRAVELS 8,000 RPM 16 ATC
- EZ Stock Number: EZ549 … [Read more...]
- EZ Stock Number: EZ549 … [Read more...]
- year: 2021
- status: for sale
- country: united states
- 208 volt, 3 phase, 60 hz, 67.3 amps electrics
- main motor: 10/15 hp
- control: prototrak/rmx cnc control
- Used machine located in Central Willamette Valley, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
- status: for sale
- country: united states
- 208 volt, 3 phase, 60 hz, 67.3 amps electrics
- main motor: 10/15 hp
- control: prototrak/rmx cnc control
- Used machine located in Central Willamette Valley, OR
We also buy used and surplus machinery and equipment.
Send photos and specifications of available equipment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: October 14, 2026 at 12:55 PM
Industry: Circuit Breakers
Description: Anyone have a TP3030TTR they can quote? Prefer a C330LSIG box but will take whatever you've got.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
