Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: June 8, 2026 at 5:47 PM
Industry: Circuit Breakers
Description: 45 KVA 240 to 208-120 3phase
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 4:48 PM
Industry: General Machinery & Equipment
Description: Press Brake 60’ nice machine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 4:22 PM
Industry: Motors - A.C. & D.C.
Price: 10,000 OBO
Condition: NEW OPEN BOX
Inlet: 5" NPT
Pumping speed: 152 - 1,171 CFM
Maximum pressure differential: 17 PSI
Ultimate vacuum: 575 mbar
Weight: 510 lbs
AS IS WAS A WORKING SPARE
NO RETURNS
Pick up- Sallisaw, OK. Shipping available.
Inlet: 5" NPT
Pumping speed: 152 - 1,171 CFM
Maximum pressure differential: 17 PSI
Ultimate vacuum: 575 mbar
Weight: 510 lbs
AS IS WAS A WORKING SPARE
NO RETURNS
Pick up- Sallisaw, OK. Shipping available.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 4:19 PM
Industry: Processing Equipment
Description: Local farm in Tucson, AZ looking for a walkin cooler box.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 3:42 PM
Industry: Generators & Engines
Description: Looking for engine only 2923HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 3:37 PM
Industry: General Machinery & Equipment
Description: Straight side or Gap. 150 t min. 32x32 bed min. 4” stroke min. 18” shut height min. Must be able to inspect under power
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 3:21 PM
Industry: General Machinery & Equipment
Description: 75 to 110 ton OBI punch press. similar to bliss c110. must have 19" shut height (shorter shut height will not be considered), 5 to 6" stroke, speed not important . must be a very good running machine. Ideal location, Illinois or Midwest area.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 3:03 PM
Industry: General Machinery & Equipment
Price: 6,500.00 or best offer
Description: An Rotary Screw Air Compressor by Ingersoll Rand is a combined high efficiency integrated compression module, simple diagnostic, quiet operation and compact footprint. This workhorse is designed to run 24 hour a day, 7 days a week and 52 weeks a year for many years. This compressor is driven by a 15 hp motor,230 - 460v and also has a 120-gallon horizontal receiver tank.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 2:38 PM
Industry: General Machinery & Equipment
Price: 11,750.00 or best offer
Description: Heavy Duty Radius-Circle Rebar Bender for sale. This machine bends rebar sizes #3 through #18. The custom-built machine was designed using a 20hp Railcar puller on the bottom with a Radius attachment welded on top. An older machine in perfect working order and presently in daily use.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 2:17 PM
Industry: Transformers
• May be new or used
• 5 kVA
• Primary voltage 24 kV
• Secondary voltage 120V
• Single Phase (1P)
• ISOREG or Sylvania models below preferred but will consider other brands.
o ISOREG P/N 410355
o Sylvania P/N 60005F001
• Need quantity of 3 but will take lower quantities
• 5 kVA
• Primary voltage 24 kV
• Secondary voltage 120V
• Single Phase (1P)
• ISOREG or Sylvania models below preferred but will consider other brands.
o ISOREG P/N 410355
o Sylvania P/N 60005F001
• Need quantity of 3 but will take lower quantities
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 2:02 PM
Industry: General Machinery & Equipment
Description: fiber laser 5 x 10 size
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 1:59 PM
Industry: General Machinery & Equipment
Price: 12,000 or best offer
Description: Rebar Spiral Machine for sale. This machine has a 10hp motor which turns circle of a #3 thru #5 bar. On #3's our smallest would be 8 1/2" to 42" dia. This machine was manufactured by Alamo Iron Works in the early 1970s. This is an older machine in perfect working order and presently in daily use.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 1:31 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 12:34 PM
Industry: General Machinery & Equipment
Description: DTI Hogger II, Table Dia. 100", Swing 112", Work Ht-U/R 35", 2 Ram Heads, 160 hp, 180 RPM, Fanuc 18-iT, 60 ATC, Full Enclosure, Chip Conveyor, High Pressure Coolant,
New 2007
New 2007
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 12:32 PM
Industry: General Machinery & Equipment
Description: MVD 6Kw Laser, 5' x 10', Dual Pallet Shuttle Table, Dust Collector, Nesting Software, Camera Cutting Monitoring, Very Low Hours, New 2019
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 12:30 PM
Industry: General Machinery & Equipment
Description: 53” x 393" Poreba Model TR135-B2/10M Gap Bed Lathe, 500 RPM, Inch & Metric Threading, 4.73" Spindle Bore, 63" Swing in Gap, 41" Swing Over Cross Slide, 5 Steady Rests, 32" 4-Jaw Chuck, New 1994
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 11:47 AM
Industry: Motors - A.C. & D.C.
3600RPM
4160 VOLT
509LS FRAME
PLEASE EMAIL PRICE AND PICTURES OF MOTOR & NAME PLATE
DRIP PROOF
NO SUBSTITUTIONS
4160 VOLT
509LS FRAME
PLEASE EMAIL PRICE AND PICTURES OF MOTOR & NAME PLATE
DRIP PROOF
NO SUBSTITUTIONS
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 11:28 AM
Industry: Generators & Engines
Description: New Sound Attenuated, CATERPILLAR Model DG500-CG18 Natural Gas Generator Set, U.L. 2200, 120/208V or Change to 277/480V, CAT 105 Degree C Prime Power, PM Generator with Space Heater, EMCP 4.3 Control Panel, Auto Start / Stop Capability, Engine Safety Shutdowns, Electronic Governor, 2000 Amp Circuit Breaker, Oil Filters & Std Air Cleaner, Jacket Water Heater, 24V Starter, 10A Battery Charger, Gas Regulator 1.5-to-60 PSI, Radiator, Sound Attenuated Aluminum Enclosure (White) IBC Wind Certified to
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 11:24 AM
Industry: General Machinery & Equipment
Description: Yoder rollfomers - all sizes
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 11:14 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 11:13 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 11:11 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 11:10 AM
Industry: General Machinery & Equipment
Price: Best Offer
Description: ESMA Model E992 Automated Ultrasonic Part Cleaning System, New in 2018.. System was originally set up with the Ultrasonic Cleaner, and (4) 60 gal. tanks. One for Cleaning Alkali, One for Alkali Rinse, One for Acid/Passivation, and One for Acid Rinse.
The Acid holding tank rotted out, and was not replaced. … [Read more...]
The Acid holding tank rotted out, and was not replaced. … [Read more...]
MAKE AN OFFER
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 10:53 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 10:47 AM
Industry: General Machinery & Equipment
Description: SEEKING CNC FIBER LASER STRUCTURAL BEAM LINE FOR I-BEAMS AND H-BEAMS
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 10:07 AM
Industry: Other Electrical & Power Equipment
Description: For pricing and additional photos, please reach out to us at the contact info provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 10:00 AM
Industry: Motors - A.C. & D.C.
C Power Code
TR Type
DCI6366462-T1-JF
For pricing and additional photos, please reach out to us at the contact info provided.
TR Type
DCI6366462-T1-JF
For pricing and additional photos, please reach out to us at the contact info provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 9:29 AM
Industry: General Machinery & Equipment
Description: Landis 3R OD / Cylindrical Grinder, Plain or Universal, 48" Centers x Large Swing. Landis Only. CHW Model will work.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 8:53 AM
Industry: Other Electrical & Power Equipment
Description: Usable panel at least 510 x 610 mm, confirmed as working area, not carrier or nominal size.
Single- or double-sided application … [Read more...]
Single- or double-sided application … [Read more...]
Lamination plus flattening (single, dual, or three-stage)
Temperature range of 60-140C and platen uniformity tolerance
Yellow-room cleanroom class compatibility and footprint
Vacuum pressure: 5 hPa
Pressing: 0.5 MPa
Data logging and recipe control
Carrier system: silicone conveyor vs PET roll-to-roll
Lamination method: flat plate / diaphragm under vacuum
Temperature range of 60-140C and platen uniformity tolerance
Yellow-room cleanroom class compatibility and footprint
Vacuum pressure: 5 hPa
Pressing: 0.5 MPa
Data logging and recipe control
Carrier system: silicone conveyor vs PET roll-to-roll
Lamination method: flat plate / diaphragm under vacuum
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 8:37 AM
Industry: General Machinery & Equipment
Description: HAAS VF2SS super speed vertical machining center, 12000 rpm, 24 atc , from medical r & d dept. , Mfg. 2010, less than 6000 hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 8:32 AM
Industry: General Machinery & Equipment
Description: overhead bridge crane system with two parallel steel tracks or runways to guide a steel bridge over the work space , 3 ton capacity, with approx. dimensions of 10 ft x 18 ft , height 12 to 13ft .
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 7:37 AM
Industry: Motors - A.C. & D.C.
Description: SQ-7513, EOK 400Hp 1800Rpm 447/9T TEFC
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Outfeed Length: 14'
Max Round Tube Diameter: 5.5"
Max Rectangle/Square Dimensions: 4.7" x 4.7"
Max Material Weight: 10Lbs/Ft
Laser Type: C02
21' Infeed
14' Outfeed
Chiller
Dust Collector
Rofin DC 025 C02 Slab Resonator
Max Round Tube Diameter: 5.5"
Max Rectangle/Square Dimensions: 4.7" x 4.7"
Max Material Weight: 10Lbs/Ft
Laser Type: C02
21' Infeed
14' Outfeed
Chiller
Dust Collector
Rofin DC 025 C02 Slab Resonator
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Number of Tables: 2
X travel: 121"
Y Travel: 60"
Z Travel: 4.5"
Table Capacity: 1,276Lbs
Laser Type: C02
Dual Table
Chiller
Dust Collector
Trumpf Trucoax 3200 Resonator
X travel: 121"
Y Travel: 60"
Z Travel: 4.5"
Table Capacity: 1,276Lbs
Laser Type: C02
Dual Table
Chiller
Dust Collector
Trumpf Trucoax 3200 Resonator
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 7:28 AM
Industry: General Machinery & Equipment
FF= Full Feature (Integrated Refrigerated Air Dryer)
PSI: 125
Voltage: 460V / 3 Phase / 60 Hz
CFM: 194
Cooling Type: Air Cooled
Dryer: Integrated refrigerated dryer
Tank: Duo Tank mounted package
Drive Type: Gear Driven
Integrated Refrigerated Dryer
Brand new old stock
Zero hours
Controller: Elektronikon Touch microprocessor
Cosmetic damage
PSI: 125
Voltage: 460V / 3 Phase / 60 Hz
CFM: 194
Cooling Type: Air Cooled
Dryer: Integrated refrigerated dryer
Tank: Duo Tank mounted package
Drive Type: Gear Driven
Integrated Refrigerated Dryer
Brand new old stock
Zero hours
Controller: Elektronikon Touch microprocessor
Cosmetic damage
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 8, 2026 at 7:20 AM
Industry: Other Electrical & Power Equipment
Description: Cerus Industrial ORION Contactor CRC-50-AC120V with 120V coil
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 7, 2026 at 11:31 PM
Industry: Motors - A.C. & D.C.
Description: Looking to buy a GE MD828 Mill motor. HP 2500, RPM 650, Volts Arm 650, amps 3000, Field volts 144 or something simular with these spec's. Send me pictures, nameplate data and dimensions on what you can offer.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 7, 2026 at 11:28 AM
Industry: General Machinery & Equipment
Description: -Axis: 48 inches (1219 mm) up to 96 inches (2438 mm)
Y-Axis: 14 inches (356 mm) … [Read more...]
Y-Axis: 14 inches (356 mm) … [Read more...]
Z-Axis: 6 inches (152 mm)
Spindle Taper: 40
Quill Diameter: 3-inch (76.2 mm)
Rotation: The gear box can rotate 360°
Bed Width: 12 inches (305 mm)
Saddle Width: 8 inches (203 mm)
Equipped With
72 " Rail
Hydraulic Power Unit
Motor Controllers
Extra Tools for mounting/servicing the unit
Spindle Taper: 40
Quill Diameter: 3-inch (76.2 mm)
Rotation: The gear box can rotate 360°
Bed Width: 12 inches (305 mm)
Saddle Width: 8 inches (203 mm)
Equipped With
72 " Rail
Hydraulic Power Unit
Motor Controllers
Extra Tools for mounting/servicing the unit
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 7, 2026 at 11:28 AM
Industry: General Machinery & Equipment
Reach: 62.91
Repeatability: 0.0039"
Max Payload: 8kg
Degrees of Motion: 6
Panasonic Positioner Unit - Model No: YA-1GJB31
Panasonic Robot Controller - Model No: YA-1QAR81U06
Work Station: 32" x 72"
ARS- 1602 Welding Cell
Single PA1600 - 6 - Axis Robot
Panasonic G2 Control Unit
WG-U1600 Welding Unit
Panasonic YA-1 Manipulator
InterTech Nozzle Reamer
Mig Torch Included
Transformer 480 -240- 208 Primary Volts
Repeatability: 0.0039"
Max Payload: 8kg
Degrees of Motion: 6
Panasonic Positioner Unit - Model No: YA-1GJB31
Panasonic Robot Controller - Model No: YA-1QAR81U06
Work Station: 32" x 72"
ARS- 1602 Welding Cell
Single PA1600 - 6 - Axis Robot
Panasonic G2 Control Unit
WG-U1600 Welding Unit
Panasonic YA-1 Manipulator
InterTech Nozzle Reamer
Mig Torch Included
Transformer 480 -240- 208 Primary Volts
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 7, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Turning Diameter 8"
Machining Length 8"
Bar Capacity 2"
Spindle Nose A2-6
Spindle Bore 3.937"
X Travel 4.7"
Z Travel 8.26"
X Rapid Traverse 707 ipm
Z Rapid Traverse 943 ipm
Fanuc 21T CNC Control
Coolant Tank
Collet Nose
Tool Holders
Chip Conveyor
Part Loader
Parts Conveyor
Machining Length 8"
Bar Capacity 2"
Spindle Nose A2-6
Spindle Bore 3.937"
X Travel 4.7"
Z Travel 8.26"
X Rapid Traverse 707 ipm
Z Rapid Traverse 943 ipm
Fanuc 21T CNC Control
Coolant Tank
Collet Nose
Tool Holders
Chip Conveyor
Part Loader
Parts Conveyor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 6, 2026 at 11:42 PM
Industry: Forklifts, Construction & Earthmoving
Price: best offer
Description: WE HAVE NEW ,USED, REMAN HYDRAULIC BREAKERS & HAMMER FOR SALE. SKIDSTEER, BACKHOE, EXCAVATOR SIZES AVAILABLE.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 6, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Year of Mfg: 2016
Nominal Payload: 7kg
Maximum Payload: 20kg
Reach: 1000 mm
Repeatability: 0.03mm
Degrees of Freedom: 6 axes
Robot Weight: 111 kg
Cell:
Year of Mfg: 2016
Input Voltage: 400 VAC (3-Phase)
Power Consumption: 32 A
Control System: Stäubli CS8C
Nominal Payload: 7kg
Maximum Payload: 20kg
Reach: 1000 mm
Repeatability: 0.03mm
Degrees of Freedom: 6 axes
Robot Weight: 111 kg
Cell:
Year of Mfg: 2016
Input Voltage: 400 VAC (3-Phase)
Power Consumption: 32 A
Control System: Stäubli CS8C
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 6, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Max Swing 29.50”
Max Turning Dia 25.59”
Max Turning Height 23.62”
Spindle Nose A2-11
Spindle Speed 20~2000 RPM
Max Spindle Torque (30min) 3,100 ft.lbs.
X-Axis: -1.96”, +17.72”
Z-Axis: 25.59”
X-Axis Rapid Traverse 787.4”/ Min
Z-Axis Rapid Traverse 787.4” / Min
50HP
12 Tool Stations
Tool Size 1.25”
Fanuc OiTC Control
(4) Turning Tool Holder & (3) Live Tool Holders
Coolant System, Hydraulic Unit
Chip Conveyor
Renishaw RMP60 Probe
Max Turning Dia 25.59”
Max Turning Height 23.62”
Spindle Nose A2-11
Spindle Speed 20~2000 RPM
Max Spindle Torque (30min) 3,100 ft.lbs.
X-Axis: -1.96”, +17.72”
Z-Axis: 25.59”
X-Axis Rapid Traverse 787.4”/ Min
Z-Axis Rapid Traverse 787.4” / Min
50HP
12 Tool Stations
Tool Size 1.25”
Fanuc OiTC Control
(4) Turning Tool Holder & (3) Live Tool Holders
Coolant System, Hydraulic Unit
Chip Conveyor
Renishaw RMP60 Probe
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 6, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Description: Max. Punching Capacity: ~25 tons
Machine Weight: 11,050 kg (~24,360 lbs) … [Read more...]
Machine Weight: 11,050 kg (~24,360 lbs) … [Read more...]
Mains Supply: 460 V / 60 Hz
Connected Load: 19 kVA
Head Rotation: 360 degrees
Equipped With
-Trumalift SheetMaster
*The punch currently needs TRUMPF PART#: 234006 - Clamping part (wedge) which can be purchased from Trumpf for $1,724.60*
Connected Load: 19 kVA
Head Rotation: 360 degrees
Equipped With
-Trumalift SheetMaster
*The punch currently needs TRUMPF PART#: 234006 - Clamping part (wedge) which can be purchased from Trumpf for $1,724.60*
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 7:55 PM
Industry: General Machinery & Equipment
Description: Amada EM-2510NT w/ MP-1225NJ Loader, Mfg. 2006
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 7:10 PM
Industry: Motors - A.C. & D.C.
Description: 100HP 1750/2000 368AT 500V 300/150 STAB SHUNT DPFG. Recon or new only
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 4:14 PM
Industry: General Machinery & Equipment
Description: Haas VF6/40 (2010+) MUST HAVE LOW HOURS
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 3:37 PM
Industry: Motors - A.C. & D.C.
Budget: $5,001 - $10,000
Description: Look for used 400hp 460v electric motor and 400hp VFD
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 3:21 PM
Industry: Other Electrical & Power Equipment
Description: ARC CHUTES & FLAPPER PARTS ITE 7850
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 3:21 PM
Industry: General Machinery & Equipment
Description: Amada HDS2204NTW CNC Hydraulic Press Brake (2012)
240 Ton X 14', Flush Floor, Astro 165W NT Robotic Bending System
240 Ton X 14', Flush Floor, Astro 165W NT Robotic Bending System
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 3:12 PM
Industry: Generators & Engines
Description: Portable Units Ready To Go!! Please contact me for more details and pricing.
-2013 Cummins DQFAD 1000KW 26 Hours … [Read more...]
-2013 Cummins DQFAD 1000KW 26 Hours … [Read more...]
-2022 Hipower HRVW685 3209 Hours
-2022 Hipower HRVW625 1251 Hours
-2013 Atlas Copco QAS600 2317 Hours
-2013 CAT XQ350 5300 Hours
-2015 CAT XQ200 6772 Hours
-2014 Cat XQ200 8975 Hours
-2016 CAT XQ200 10500 Hours
-2019 Doosan G150 1666 Hours
-2019 Doosan G125 2715 Hours
-2023 Wacker Neuson G70 175 Hours
-2019 Doosan G70 2351 Hours
-2019 Allmand MP65 1703 Hours
-2022 Hipower HRVW625 1251 Hours
-2013 Atlas Copco QAS600 2317 Hours
-2013 CAT XQ350 5300 Hours
-2015 CAT XQ200 6772 Hours
-2014 Cat XQ200 8975 Hours
-2016 CAT XQ200 10500 Hours
-2019 Doosan G150 1666 Hours
-2019 Doosan G125 2715 Hours
-2023 Wacker Neuson G70 175 Hours
-2019 Doosan G70 2351 Hours
-2019 Allmand MP65 1703 Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 2:09 PM
Industry: General Machinery & Equipment
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 2:05 PM
Industry: General Machinery & Equipment
Price: Best Offer
Description: Sell One Atlas 335 VFD dry air compressor
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 1:55 PM
Industry: Motors - A.C. & D.C.
Description: Im looking for 3 dodge txt 715 tapered bore gearboxes any condition
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 1:52 PM
Industry: General Machinery & Equipment
Price: 9,250.00 or "best offer"
Description: #8 Rebar Bender by DMI-ARNOLD. It features a 10 hp motor, 4 speed transmission and heavy duty chassis. This machine can bend all sizes of rebar up to #8 bar. This machine comes with an older RMS Controller. This is an older machine in perfect working order and presently in daily use.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 1:15 PM
Industry: Transformers
Description: Two identical Weg transformers. Unused. 100/133/167 mva. 120kvdelta-24.9kvwye with HV LTC
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 1:11 PM
Industry: Transformers
Description: Two identical Westimghouse transformers. 1975 vintage. reconditioned with all new bushings. Immediately available.12/16/20/22.4 mva. 115kvdelta-24.9kvwye
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 12:47 PM
Industry: General Machinery & Equipment
Price: best offer
Description: Brand New Trash Pump. Never used. Bought for a flooding problem as a precaution and to lower insurance premiums, and then move to a dryer warehouse
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 12:46 PM
Industry: General Machinery & Equipment
Price: best offer
Description: Brand new 1.5 hp water pump. Bought as a back up and never needed it.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 12:44 PM
Industry: Transformers
Price: best offer
Description: Single phase to three phase converter. Pretty good shape, moved from an old single leg warehouse to a warhouse with three phase.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 12:43 PM
Industry: Motors - A.C. & D.C.
Price: best offer
Description: Motor Control for a 10 HP electric motor (also listed). Bought by a 3rd party vendor and bought the wrong size, ghosted me before I could get it returned. Never been used still on box.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 12:41 PM
Industry: Motors - A.C. & D.C.
Price: best offer
Description: 10 HP Electric Motor. Bought through a 3rd party via Grainger, not needed, Grainger wouldn't take back and 3rd party vanished. Never used.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 12:14 PM
Industry: General Machinery & Equipment
Description: looking for a 5" x 5" x 5/8" angle iron roller/profile bender
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 12:12 PM
Industry: General Machinery & Equipment
Description: 10' x 5/8" or 3/4" powered rolls. 3 or 4 roll is good. Also looking for a 6' or 8' x 1/2" or 5/8" rolls
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 12:12 PM
Industry: General Machinery & Equipment
Description: 60" x 30" VMC or Slightly Larger. Fanuc Control, $45K Budget.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 11:28 AM
Industry: Generators & Engines
Price: $255,500.00
Description: Standby Takeout Caterpillar Model 3516TA Diesel Generator Set, 60/50 Hertz, Premium Engine Gauge Panel, CAT Factory Junction Box to Interface with Buyers Controls for Auto Start / Stop, Engine Safety Shutdowns, KATO 1500kw Prime Power Two Bearing Generator 105 Degree C, 6 Wire, IP23 (2020 Model) with Digital Voltage Regulator, Electronic Governor, Standard Duty Air Cleaners, Prime Fuel and Oil Filtration, Dual 24V Starter, Jacket Water Heater, Vertical Remote Radiators.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 11:28 AM
Industry: Other Electrical & Power Equipment
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 11:06 AM
Industry: General Machinery & Equipment
Price: 19,500.00
Description: Canton 22 Alligator Shear For Sale. This Canton Alligator Shear is great for rebar and scrap metal cutting. It also has a 24 inch cutting seat and it is powered by a 10 hp ; 3 phase electric motor.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 10:52 AM
Industry: Motors - A.C. & D.C.
Price: Make offer
Description: Qty 25 – P/N 00.456262.1.02 Helwig Brush Spring –used in LA 600 HP DC L1
NO red wear indicator. … [Read more...]
NO red wear indicator. … [Read more...]
Qty 23 – L-1 Brush – Helwig used in LA 600 HP DC motor L1
Qty 6 – L-2 Brush– .625 X 1.5 X 3.125 Grade H76C- Helwig used in LA 500 HP DC L2
Qty 48 – L-3 Brush-1 X 1.5 X 3.125 Grade HH76C– Helwig used in GE 600 HP DC motor L3
Qty 24 – GE P/N GE36A160423AAG02 Brush Hilder Assembly
With springs and hardware for mounting on brush bar.
Qty 2 - Brush Yoke Rings 1” thick X 21” dia. used i
Qty 6 – L-2 Brush– .625 X 1.5 X 3.125 Grade H76C- Helwig used in LA 500 HP DC L2
Qty 48 – L-3 Brush-1 X 1.5 X 3.125 Grade HH76C– Helwig used in GE 600 HP DC motor L3
Qty 24 – GE P/N GE36A160423AAG02 Brush Hilder Assembly
With springs and hardware for mounting on brush bar.
Qty 2 - Brush Yoke Rings 1” thick X 21” dia. used i
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 10:45 AM
Industry: Motors - A.C. & D.C.
Description: Qty 22 - Helwig P/N 15.751.530.1.501 – Brush Holder used in LA 600 HP DC motor L1
NO brush spring. … [Read more...]
NO brush spring. … [Read more...]
Qty 48 – L2 Brush Holder – Helwig – used in LA 500 HP DC L2
Has 6.00 # spring with red wear indicator.
Qty 48 – Helwig P/N 15-621530.1.502 – Brush Holder used in GE 600 HP DC motor L3
Has 4.25 # spring with red wear indicator.
Qty 25 – P/N 00.456262.1.02 Helwig Brush Spring –used in LA 600 HP DC L1
NO red wear indicator.
Has 6.00 # spring with red wear indicator.
Qty 48 – Helwig P/N 15-621530.1.502 – Brush Holder used in GE 600 HP DC motor L3
Has 4.25 # spring with red wear indicator.
Qty 25 – P/N 00.456262.1.02 Helwig Brush Spring –used in LA 600 HP DC L1
NO red wear indicator.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 10:02 AM
Industry: General Machinery & Equipment
Description: Tornos SAS-16.6 6 spindle screw machine
Tornos Deco 10 9 axis CNC Swiss screw machine … [Read more...]
Tornos Deco 10 9 axis CNC Swiss screw machine … [Read more...]
Gildemeister GM20AC 6 spindle screw machine
Index MS-52 6 spindle screw machine
Acme-Gridley 1 1/4"RB8 screw machine
Tajmac-ZPS 6/20 6 spindle screw machine
Index MS-52 6 spindle screw machine
Acme-Gridley 1 1/4"RB8 screw machine
Tajmac-ZPS 6/20 6 spindle screw machine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 9:55 AM
Industry: General Machinery & Equipment
Year: 2003
Chamber-W 120"
Chamber-L 65"
Chamber-H 65"
Max Temperature 1,000°F
Weight 14,000#
INCINERATOR -
Year - 2003
Specifications
Electrical: 480v /3PH / 60Hz - approx 2 amps
Fuel: Matural Gas @ 1 - 5 PSIG
1,600 SCFH @ 1,000 BTU/SCF
1,600,000 BTUH
Temperature:
1,500ºF Maximum
1,400ºF Normal
Capacity: 300 SCFM air @ 200ºF (minimum)
Incineration Time: 1 second
Purge Time: 6 Minutes
Approx Shipping Weight: 3,900#
Chamber-W 120"
Chamber-L 65"
Chamber-H 65"
Max Temperature 1,000°F
Weight 14,000#
INCINERATOR -
Year - 2003
Specifications
Electrical: 480v /3PH / 60Hz - approx 2 amps
Fuel: Matural Gas @ 1 - 5 PSIG
1,600 SCFH @ 1,000 BTU/SCF
1,600,000 BTUH
Temperature:
1,500ºF Maximum
1,400ºF Normal
Capacity: 300 SCFM air @ 200ºF (minimum)
Incineration Time: 1 second
Purge Time: 6 Minutes
Approx Shipping Weight: 3,900#
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 9:50 AM
Industry: General Machinery & Equipment
Year: 2005
3 + 2 Axis Head
X Axis Travel: 118"
Y Axis Travel: 98"
Z Axis Travel: 43"
B Axis Rotation: 0 - 360º
A Axis Rotation: 0 - 45º
Spindle Taper: CAT 50
Spindle Speed: 10,000 RPM
Table Size: 120" fb x 87" lr
Foot Pedal for Tool Clamp Release
Spindle Rebuilt in 2024
Chiller Reconditioned in 2024
Preventative Maintenance by Tarus
Rebuilt Head and upgraded controls: $60,000.00 in cost 2017
Recent PM's: $18,000.00 in cost 2024
3 + 2 Axis Head
X Axis Travel: 118"
Y Axis Travel: 98"
Z Axis Travel: 43"
B Axis Rotation: 0 - 360º
A Axis Rotation: 0 - 45º
Spindle Taper: CAT 50
Spindle Speed: 10,000 RPM
Table Size: 120" fb x 87" lr
Foot Pedal for Tool Clamp Release
Spindle Rebuilt in 2024
Chiller Reconditioned in 2024
Preventative Maintenance by Tarus
Rebuilt Head and upgraded controls: $60,000.00 in cost 2017
Recent PM's: $18,000.00 in cost 2024
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 9:46 AM
Industry: General Machinery & Equipment
Description: 90 Tons (81.6 Metric Tons)
Overall Bending Length: 8' (96") (2,438 mm) … [Read more...]
Overall Bending Length: 8' (96") (2,438 mm) … [Read more...]
Distance Between Housings: 6' 6" (78.5") (1,994 mm)
Max Stroke: 14" (355.6 mm)
Open Height: 15" (381 mm)
Closed Height: 7" (177.8 mm)
Throat Depth: 7" (177.8 mm)
Approach Speed: 260 IPM (6,604 mm/min)
Pressing Speed: 1 to 80 IPM (25.4 to 2,032 mm/min)
Return Speed: 280 IPM (7,112 mm/min)
Cincinnati PC-Based CNC Control
2-Axis CNC Backgauge
LazerSafe LZS‑003 Safety
Wila Manual Crowning
Secondary Digital Display
Max Stroke: 14" (355.6 mm)
Open Height: 15" (381 mm)
Closed Height: 7" (177.8 mm)
Throat Depth: 7" (177.8 mm)
Approach Speed: 260 IPM (6,604 mm/min)
Pressing Speed: 1 to 80 IPM (25.4 to 2,032 mm/min)
Return Speed: 280 IPM (7,112 mm/min)
Cincinnati PC-Based CNC Control
2-Axis CNC Backgauge
LazerSafe LZS‑003 Safety
Wila Manual Crowning
Secondary Digital Display
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 9:44 AM
Industry: General Machinery & Equipment
X travel: 120"
Y Travel: 60"
Z Travel: 4.5"
Table Capacity: 1,276Lbs
Laser Type: C02
Chiller
Dust Collector
TruCoax 3200 Resonator
Load/Unload System
Y Travel: 60"
Z Travel: 4.5"
Table Capacity: 1,276Lbs
Laser Type: C02
Chiller
Dust Collector
TruCoax 3200 Resonator
Load/Unload System
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 9:42 AM
Industry: General Machinery & Equipment
Max Reach: 56"
Max Robot Payload: 26.4Lbs
Table Workspace: 72"
Table Payload Per side: 1,100Lbs
Index Time: 3.5 Seconds
Lincoln Electric Powerwave R450
Welding Torches for Robot Head
Complete Enclosure
Dual Station Turn-Table
Max Robot Payload: 26.4Lbs
Table Workspace: 72"
Table Payload Per side: 1,100Lbs
Index Time: 3.5 Seconds
Lincoln Electric Powerwave R450
Welding Torches for Robot Head
Complete Enclosure
Dual Station Turn-Table
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 9:37 AM
Industry: Motors - A.C. & D.C.
Description: Motor de 300 HP, modelo 3D4300L352882
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 5, 2026 at 9:14 AM
Industry: Processing Equipment
Description: Integrity 12ILH 6 stage pump but will consider other brands
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 4:37 PM
Industry: General Machinery & Equipment
Description: Sengfeng Model SF3015H4 Fiber Laser 12.4KW Raycus, working area 3050mm x 1530mm, 12,000 W Raycus laser source, Boci automatic focus laser head, Exchange working tables, . Hpycut software (2 Seats), CWFL-12000 water chiller, High quality X,Y WMH Herion Rack & pinion and THK guide rails, Reducers, Motovario, Energy Chain, Igus, Pneumatic Controls, Touch Screen operation software, Air blower, Voltage Stabilizer, Transformer, Purchased New in 2022, 900 Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 3:43 PM
Industry: Other Electrical & Power Equipment
Description: 4000 AMP ATS 480Y277V 3PH 4W OPEN TRANSITION CAN BE OPEN CHASIS N1 OR N3R OPEN TO ALL CONDITION
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 3:40 PM
Industry: Transformers
Description: 750 kva 480 480y qty 2 dry alum please quote condition
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 3:27 PM
Industry: Generators & Engines
Description: We have several Standby Natural Gas and Diesel Generators Available
-2010 Cummins DQGAA 1250KW 640 Hours … [Read more...]
-2010 Cummins DQGAA 1250KW 640 Hours … [Read more...]
-2014 Taylor TD1600 1600KW 187 Hours
-2012 Kohler 2000REOZMD 2000KW 361 Hours
-2008 Kohler 800REOZMB 800KW 1711 Hours
-2023 Cat D500GC 500KW New Surplus
-2015 Cummins GFJC 500KW Natural Gas 200 Hours
-2020 Kohler KG125R 125KW 273 Hours Natural Gas
-2021 Cummins C150D6D 150KW 3 Hours
Please contact me directly for more info and pricing.
-2012 Kohler 2000REOZMD 2000KW 361 Hours
-2008 Kohler 800REOZMB 800KW 1711 Hours
-2023 Cat D500GC 500KW New Surplus
-2015 Cummins GFJC 500KW Natural Gas 200 Hours
-2020 Kohler KG125R 125KW 273 Hours Natural Gas
-2021 Cummins C150D6D 150KW 3 Hours
Please contact me directly for more info and pricing.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 3:20 PM
Industry: General Machinery & Equipment
Description: MUST SELL, OWNER NEEDS FLOOR SPACE, Union BFP130, 5", X=220", Y=119", Z=118", Spindle Support, ISO 50, 1000 RPM, In Feeding Rotary Table 86"x86", Heidenhain TNC355 CNC Control, Facing Head, Very Good Condition. Looking for offers!
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 3:09 PM
Industry: Generators & Engines
Price: Call for price
Description: 2 Available, Load Tested, Special Dealer Price.
Pre-owned Baldor IDLC2000-2M Package Rental Grade Power Module Powered by Mitsubishi Diesel Engine Rated at 2000KW Standby, 1800KW Prime, 2500KVA, 60Hz, 480V, 1800RPM Includes Engine Driven Radiator, Digital Control Panel, 3000AMP Main Breaker, Internal Fuel Tank Trailer Mounted in 40′ Container Approximately 491 Hours on the Meter
Pre-owned Baldor IDLC2000-2M Package Rental Grade Power Module Powered by Mitsubishi Diesel Engine Rated at 2000KW Standby, 1800KW Prime, 2500KVA, 60Hz, 480V, 1800RPM Includes Engine Driven Radiator, Digital Control Panel, 3000AMP Main Breaker, Internal Fuel Tank Trailer Mounted in 40′ Container Approximately 491 Hours on the Meter
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 3:08 PM
Industry: Circuit Breakers
Description: EH3B125 used must be original no recon for next day
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 3:04 PM
Industry: Generators & Engines
Price: Call for price
Description: 2 AVAILABLE. Load Tested, ready to work. Special Dealer Price.
Pre-owned Baldor IDLC1250-2M Diesel Generator Sets – Powered by Mitsubishi S12R-Y2PTAW-1 Engine – Rated at 1250KW Standby, 1112KW Prime, 1563KVA, 60Hz, 480V, 1800RPM – Includes Engine Driven Radiator, Woodward ProAct Digital Speed Controller, ComAp InteliGen Digital Panel, Breaker, Fuel Tank – Trailer Mounted in Sound Attenuated Enclosure – EPA Tier 2 – Approximately 556 Hours on the Meter … [Read more...]
Pre-owned Baldor IDLC1250-2M Diesel Generator Sets – Powered by Mitsubishi S12R-Y2PTAW-1 Engine – Rated at 1250KW Standby, 1112KW Prime, 1563KVA, 60Hz, 480V, 1800RPM – Includes Engine Driven Radiator, Woodward ProAct Digital Speed Controller, ComAp InteliGen Digital Panel, Breaker, Fuel Tank – Trailer Mounted in Sound Attenuated Enclosure – EPA Tier 2 – Approximately 556 Hours on the Meter … [Read more...]
Identical Unit Also Available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 2:34 PM
Industry: General Machinery & Equipment
Price: Best offer
Description: This was a grinder sharpener that my dad used to do paper cutter and Zamboni blades. Worked when last used 8 years ago when he passed . Stored in garage.looking to move
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 2:01 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 2:00 PM
Industry: General Machinery & Equipment
SERIAL NUMBER: 28921
YEAR: 1970
SPECIFICATIONS:
Maximum Tube Diameter: 3" (76 mm)
Minimum Tube Diameter: 3/4" (19 mm)
Maximum Bar Capacity: 2" (50 mm)
Minimum Bar Capacity: 3/4" (19 mm)
Total Rolls: 7
Driven Rolls: 2 (5" O.D. x 13 Long)
Idle Rolls: 5 (4" O.D. x 6" Long)
Maximum Speed: 393 FPM (120 M/Min.)
Motor: 400/440/3/50
CONDITION: Good
YEAR: 1970
SPECIFICATIONS:
Maximum Tube Diameter: 3" (76 mm)
Minimum Tube Diameter: 3/4" (19 mm)
Maximum Bar Capacity: 2" (50 mm)
Minimum Bar Capacity: 3/4" (19 mm)
Total Rolls: 7
Driven Rolls: 2 (5" O.D. x 13 Long)
Idle Rolls: 5 (4" O.D. x 6" Long)
Maximum Speed: 393 FPM (120 M/Min.)
Motor: 400/440/3/50
CONDITION: Good
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 2:00 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 1:55 PM
Industry: General Machinery & Equipment
Description: Looking for a Pneumatic Tilt Table with 2k, 3k and 4k bins that measure 39"x29" by 20" high.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 1:51 PM
Industry: Other Electrical & Power Equipment
Price: 18000
Description: 31.50" W x 80.75" L, 78.875" tall, 34.50" W x 43.25" L base, Class 1/ Division 2 Explosion proof, pharmaceutical grade, Incline Cleated Conveyor and 29.75" W x 29.75" L & 14.50" deep Hopper with 4" ss caster wheels w/ total lock. Pneumatically driven & all T304 stainless steel.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 12:50 PM
Industry: General Machinery & Equipment
Description: 12'x220Ton + press brake Hyd. late model year.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 12:28 PM
Industry: Other Electrical & Power Equipment
Price: $8,350
Description: 44 brand-new Tritium RTM75 75kW DC fast chargers available. Never deployed or powered on; unopened original crates with sequential serial numbers. Dual-port CCS1 + NACS or 2x CCS1/NACS, 480V 3-phase, OCPP 2.0, NEVI-compliant, IP54 indoor/outdoor rated. $8,350 each or $7,850 each for 10+ units. Palletized in Pittsburgh, PA and ready to ship. Buyer freight or seller-arranged shipping. Contact for photos, specs, and bulk pricing.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 12:26 PM
Industry: Other Electrical & Power Equipment
Price: $8,350
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 12:11 PM
Industry: Generators & Engines
KW 1825 @ RPM 1800 , Hz 60 , Volts 440
Sr. #: S2R00XXX
Year of Make 2006
Approx Hrs : 20,000
Qty : 2 Pcs
Please contact for details and pictures
Sr. #: S2R00XXX
Year of Make 2006
Approx Hrs : 20,000
Qty : 2 Pcs
Please contact for details and pictures
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 11:55 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 11:54 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 11:34 AM
Industry: Transformers
Description: Hello, we are looking for a 750kVA to 1000kVA, 600V to 415/240Vac, outdoor, padmount transformer.
If you have any of the above transformer, please send details and quote. Thank you.
If you have any of the above transformer, please send details and quote. Thank you.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 4, 2026 at 11:33 AM
Industry: Generators & Engines
Description: Immediate Cash Buyer: Seeking three 2 MW medium-voltage generator sets for immediate purchase and mobilization.
Required Specifications: … [Read more...]
Required Specifications: … [Read more...]
Output Power: 2 MW continuous or standby rating
Voltage: 13.8 kV (13800V) Medium Voltage
Emissions: EPA Tier 4 Final Certified (Factory or certified SCR retrofitted)
Configuration: Must include sound-attenuated weather enclosure
Fuel Tank: sub-base
Fast closing, wire transfer payment, and prompt rigging arrangement for the right equipment.
Voltage: 13.8 kV (13800V) Medium Voltage
Emissions: EPA Tier 4 Final Certified (Factory or certified SCR retrofitted)
Configuration: Must include sound-attenuated weather enclosure
Fuel Tank: sub-base
Fast closing, wire transfer payment, and prompt rigging arrangement for the right equipment.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
