Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: September 20, 2026 at 3:07 PM
Industry: Other Electrical & Power Equipment
Price: Best Offer
Description: Danfoss PVG120 proportional hydraulic control valve Bar 379/PSI 5085 - unused
Number 155Z1600 … [Read more...]
Number 155Z1600 … [Read more...]
Pump disconnect/block for variable pumps.
External cartridge valve connecting LS pressure to tank.
External cartridge valve connecting LS pressure to tank.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 20, 2026 at 2:15 PM
Industry: General Machinery & Equipment
Price: 29,500
Description: Two each 12,000 gallon capacity 304 stainless steel horizontal tank rated at 100 PSI with stamps.
8' 10" Dia x 27' straight wall with curved ends. … [Read more...]
8' 10" Dia x 27' straight wall with curved ends. … [Read more...]
Two are available.
Mounts on piers that are not included.
Clean inside
Located in western PA
Mounts on piers that are not included.
Clean inside
Located in western PA
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 20, 2026 at 1:44 PM
Industry: Other Electrical & Power Equipment
Price: 350,000
Description: Clayton, once through steam boiler, 300 psi, Natural gas fired complete system, 500 HP @ 350 psig, 2024, never installed.
FOR SALE- New Clayton steam boiler … [Read more...]
FOR SALE- New Clayton steam boiler … [Read more...]
Year 2024 never installed – currently is in factory packaging
500 horsepower at 350 PSIG design pressure.
300 PSIG operating pressure.
Natural gas fired
Feed water system, tank and pumps
Located in Western PA.
The curfrent owner paid $482,433.00 Now priced at $385.000
Picture below is a factory advertising picture showing a typical
install
500 horsepower at 350 PSIG design pressure.
300 PSIG operating pressure.
Natural gas fired
Feed water system, tank and pumps
Located in Western PA.
The curfrent owner paid $482,433.00 Now priced at $385.000
Picture below is a factory advertising picture showing a typical
install
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 20, 2026 at 1:20 PM
Industry: Circuit Breakers
Price: Best Offer
Description: NEW / General Electric 3000A, 600 V Power Breaker
New - Crated and ready to go … [Read more...]
New - Crated and ready to go … [Read more...]
Manufacturer: General Electric
Model / Part Number: TP3030TTE1CR (TP3030)
Frame Rating: 3000 A, 600 V AC rated frame
Interrupting Capacity: 100 kAIC @ 480 VAC
Pole Configuration: 3‑pole, 3‑phase
Trip Functions: LSIG (Long‑Time, Short‑Time, Instantaneous, Ground‑Fault)
Operator Type: Electrically Operated (120 VAC control)
Mounting: Bolt‑On rack configuration
Family/Series: Power Break I, TP type insulated‑case breaker
Model / Part Number: TP3030TTE1CR (TP3030)
Frame Rating: 3000 A, 600 V AC rated frame
Interrupting Capacity: 100 kAIC @ 480 VAC
Pole Configuration: 3‑pole, 3‑phase
Trip Functions: LSIG (Long‑Time, Short‑Time, Instantaneous, Ground‑Fault)
Operator Type: Electrically Operated (120 VAC control)
Mounting: Bolt‑On rack configuration
Family/Series: Power Break I, TP type insulated‑case breaker
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 19, 2026 at 11:21 AM
Industry: Circuit Breakers
Description: Looking for two mating female umbilical cord connectors
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 19, 2026 at 11:01 AM
Industry: Circuit Breakers
Description: 1 - Siemens Part # S07ED60
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 6:58 PM
Industry: General Machinery & Equipment
Description: 20,000 Lb. Uncoiler for Cut-to-Length Line, 20" I.D. x 48" Wide x 1/4 Thick
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 6:58 PM
Industry: General Machinery & Equipment
Description: 1/4" x 48" Mechanical Shear for Cut-to-Length Line
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 3:12 PM
Industry: Motors - A.C. & D.C.
1800 RPM
No. 281101/15 IP 23
AVR R250 26,50 Volt/1.12 Amps No load Amps 0.41
No. 281101/15 IP 23
AVR R250 26,50 Volt/1.12 Amps No load Amps 0.41
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 1:45 PM
Industry: General Machinery & Equipment
Price: 39500
WIDTH....................: 16"
CAPCITY..................: 1" MILD STEEL
HYDRAULIC PUNCH:
MODEL....................: B5330
PUNCHES..................: 2
HYDRAULIC UNIT:
MOTOR....................: 40 HP
VOLTS....................: 208-230/460
CAPCITY..................: 1" MILD STEEL
HYDRAULIC PUNCH:
MODEL....................: B5330
PUNCHES..................: 2
HYDRAULIC UNIT:
MOTOR....................: 40 HP
VOLTS....................: 208-230/460
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 1:44 PM
Industry: Generators & Engines
Description: Would like to replace with same Denyo generator end, if you have any other option open to reviewing would want the same SAE housing.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 1:17 PM
Industry: Generators & Engines
750kw, 480 volt
Control panel
Circuit breaker
24 volt DC electric start
Radiator cooled
900 gal double wall fuel tank
Weatherproof enclosure
Kohler model no: 750ROZD4
Serial number: 0664711
Engine model no: R1237K36
Engine serial no: 5952000693
2003 model year
1733 total hours since new
Video available (last ran and disconnected 8/29/2026)
Dealer net $43,000 fob Waverly MN.
Control panel
Circuit breaker
24 volt DC electric start
Radiator cooled
900 gal double wall fuel tank
Weatherproof enclosure
Kohler model no: 750ROZD4
Serial number: 0664711
Engine model no: R1237K36
Engine serial no: 5952000693
2003 model year
1733 total hours since new
Video available (last ran and disconnected 8/29/2026)
Dealer net $43,000 fob Waverly MN.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 1:10 PM
Industry: Circuit Breakers
Description: I am in the market for a large quantity (40+) 5000Amp Circuit Breakers. Please send me any appropriate options you can offer.
- 5000amp circuit breakers … [Read more...]
- 5000amp circuit breakers … [Read more...]
- Electrically operated
- 277/480V
- Late Q1/Early Q2 Delivery
- All brands being considered
- must be UL certified
Reach out with quotes and any follow up questions.
- 277/480V
- Late Q1/Early Q2 Delivery
- All brands being considered
- must be UL certified
Reach out with quotes and any follow up questions.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 12:36 PM
Industry: Circuit Breakers
Description: Looking for a Siemens 15-GMSG-0050-3000-130. 3000A 125VDC control
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 11:19 AM
Industry: General Machinery & Equipment
Description: Komatsu Model KCR-0448 Rasor Series Plasma Cutting System, 4' x 8' Cutting Area, 12 – 40 Amps Cutting Current, Rated 1/4" Mild Steel Cutting Capacity, 40 – 180 IPM Cutting Speed Range, +/- 0.004" Positioning Accuracy, Komatsu Control System, Open Bridge Torch Carrier, Torch Cooling, On Casters, Manuals, Miscellaneous Consumables Replacements, Refurbished 2021.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 11:15 AM
Industry: General Machinery & Equipment
Description: Yaskawa Motoman MA-1900 Robotic Welding Cell, With Yaskawa type YR-MA01900-A00 6-Axis Robot with 75" Reach, 3Kg Payload Capcity, Yaskawa DX100 Control, Miller Auto Axcess 300 DI Welding Power Supply, Hand-held Welder Remote, (2) Work/Fixture Tables Mounted on a Turn-table for Separate Set-up and Welding Cells, Video Available, LOW USAGE, New 2012.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 11:13 AM
Industry: General Machinery & Equipment
Description: Hurco VMX 30Ui 5 Axis Vertical Machining Center (2020)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 11:13 AM
Industry: General Machinery & Equipment
Description: Hermann Kolb 11' x 30" Radial Drill, 5' x 14' Tee-slotted Base, 28 – 1122 RPM, #6 MT, 11' Max. Height (Spindle Nose to Base), Power Elevation, Power Clamping, VIDEO AVAILABLE.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 11:09 AM
Industry: General Machinery & Equipment
Description: Kitamura MyTrunion 5 Axis Machining Center, 24" Round Table, 20,000 RPM, Fanuc 310i CNC, 50 ATC, Very Low Cutting Hours, New 2017
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 11:08 AM
Industry: General Machinery & Equipment
Description: Accurpress 740014 400 Ton X 14' Hydraulic Press Brake (2000)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 11:07 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 10:48 AM
Industry: General Machinery & Equipment
SERIAL NUMBER: 31
PRELIMINARY SPECIFICATIONS:
Maximum Tube Diameter: 2-1/8" (53.9 mm)
Maximum Wall Thickness: .085" (2.15 mm)
Die Area: 12" x 12" (304 mm x 304 mm)
EQUIPPED WITH:
Hydraulic Clutch
Belt Accelerator
Single Cut Die Set
Motor
PRELIMINARY SPECIFICATIONS:
Maximum Tube Diameter: 2-1/8" (53.9 mm)
Maximum Wall Thickness: .085" (2.15 mm)
Die Area: 12" x 12" (304 mm x 304 mm)
EQUIPPED WITH:
Hydraulic Clutch
Belt Accelerator
Single Cut Die Set
Motor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 10:44 AM
Industry: General Machinery & Equipment
SERIAL NUMBER: 6637
SPECIFICATIONS:
Line Direction: Right to Left
Maximum Tube Diameter: 2-1/2″ (63.5 mm)
Minimum Tube Diameter: 1/2″ (12.7 mm)
Maximum Wall Thickness: .095″ (2.41 mm)
Minimum Wall Thickness: .020″ (.508 mm)
Maximum Line Speed: 180 FPM, Maximum Gear In Speed, No Load
Maximum D/T Ratio: 60:1
Minimum D/T Ratio: 10:1
Maximum Material Yield: 50,000 PSI
SPECIFICATIONS:
Line Direction: Right to Left
Maximum Tube Diameter: 2-1/2″ (63.5 mm)
Minimum Tube Diameter: 1/2″ (12.7 mm)
Maximum Wall Thickness: .095″ (2.41 mm)
Minimum Wall Thickness: .020″ (.508 mm)
Maximum Line Speed: 180 FPM, Maximum Gear In Speed, No Load
Maximum D/T Ratio: 60:1
Minimum D/T Ratio: 10:1
Maximum Material Yield: 50,000 PSI
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 10:43 AM
Industry: General Machinery & Equipment
Number of Stands: 18
Roll Shaft Diameter: 3-1/4″
Roll Space: 52″
Horizontal Centers: First (10) Stands – 16″, Last (8) Stands – 32″
Vertical Adjustment: 12″
Base to Lower Shaft:
Line Speed:
Line Direction: Left – Right
Gearing:
EQUIPPED WITH:
Electrical Cabinet & Push Button Control
75 HP Motor, New in 2019
Roll Shaft Diameter: 3-1/4″
Roll Space: 52″
Horizontal Centers: First (10) Stands – 16″, Last (8) Stands – 32″
Vertical Adjustment: 12″
Base to Lower Shaft:
Line Speed:
Line Direction: Left – Right
Gearing:
EQUIPPED WITH:
Electrical Cabinet & Push Button Control
75 HP Motor, New in 2019
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 9:51 AM
Industry: General Machinery & Equipment
Description: 14" x 96" Universal OD grinder
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 8:49 AM
Industry: Generators & Engines
Description: Looking for a Woodward ProAct Plus Digital Speed Controller. New or used. Must be in working condition
Part # 8400-055 … [Read more...]
Part # 8400-055 … [Read more...]
Superseded Part # 8400-061
Either of those part numbers will work. Please send me any options you may have.
Thanks,
Either of those part numbers will work. Please send me any options you may have.
Thanks,
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 18, 2026 at 7:23 AM
Industry: Motors - A.C. & D.C.
Description: 250HP 1200RPM WEG 3/60/460 TEFC 449T IEEE-841 NEW
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 11:56 PM
Industry: Generators & Engines
Description: Need to purchase within 2 weeks -
Please offer what you have or will have within 2 weeks. … [Read more...]
Please offer what you have or will have within 2 weeks. … [Read more...]
20,000 gallon UL listed double wall diesel fuel tank
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 10:10 PM
Industry: Transformers
Description: Looking to purchase up to 16x 480V:600V Transformers that are available for immediate deployment, please send me any and all options you have available with pricing.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 9:23 PM
Industry: General Machinery & Equipment
Price: best offer
Model：BMC-3015A
Controller：FANUC 0i-MF PLUS(10.4”LCD)
Table size：3,000x1,400 mm
X/Y/Z axis travel：3,100/1,500/800 mm
Dist. between columns：1,650 mm
Spindle speed：12,000 rpm (Direct type)
Spindle motor：FANUC α18/12000i 15/18.5 kw
BT40 / 40ATC
X/Y/Z axis linear guide way
Heidenhain 3 axis linear scale
BLUM tool measuring system
4th Axis Wiring
Air thru spindle
Spindle oil cooler
Air conditioner
Chip conveyor + bucket
Controller：FANUC 0i-MF PLUS(10.4”LCD)
Table size：3,000x1,400 mm
X/Y/Z axis travel：3,100/1,500/800 mm
Dist. between columns：1,650 mm
Spindle speed：12,000 rpm (Direct type)
Spindle motor：FANUC α18/12000i 15/18.5 kw
BT40 / 40ATC
X/Y/Z axis linear guide way
Heidenhain 3 axis linear scale
BLUM tool measuring system
4th Axis Wiring
Air thru spindle
Spindle oil cooler
Air conditioner
Chip conveyor + bucket
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 5:11 PM
Industry: Generators & Engines
Price: 12,500
Description: Selling generator due to need for larger unit. Low hours with quarterly maintenance performed. Known repairs: automatic transfer + oil switch. Additional pictures available.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 4:23 PM
Industry: Other Electrical & Power Equipment
Price: 400
Description: Brand new still in box never use control board for commercial ice machine compatible with 235 machines
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 2:58 PM
Industry: General Machinery & Equipment
Price: 95000
Description: Two Almon Johnson Series 622 conduit reels with Hagglunds Denison radial piston hydraulic motors and level wind controls. Approx. 30' W x 12' D x 14'6" H with 8' diameter spool. 35,000 lb line pull at 100 FPM. Each reel includes approx. 3,040' of 8" OD / 6" ID Uniroyal Manuli fuel transfer hose rated at 740 PSI. Hose has not had fuel run through it and is in excellent condition. Asking $95,000 for all. Open to reasonable offers, selling hose separately, or possible trade.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 1:38 PM
Industry: General Machinery & Equipment
Budget: $5,001 - $10,000
Please provide (stll pictures non watermarked ) for our offering for resale and non watermarked videos if available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 1:25 PM
Industry: Other Electrical & Power Equipment
Budget: $10,001 - 50,000
Description: Looking to buy two identical air compressor
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 1:06 PM
Industry: General Machinery & Equipment
Description: 17 ft Swing Gray CNC VBM, 192" table, 204" swing, 120" height under rail head Saddle, GE Fanuc 15-TT CNC Control, 2 Swiveling Ram Heads, Chip Conveyor, Coolant
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 1:05 PM
Industry: General Machinery & Equipment
Description: Alesa Monti, Floor Type CNC Horizontal Boring Mill, 6" Spindle, 475" X Travel, 6 Axis, 128" Y, 40" Z, 20" W, 80" B, 360° C, 80" Rotary Table, ATC, Chip Conveyor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 12:35 PM
Industry: General Machinery & Equipment
Description: Used 20,000# x 30" Wide COE Motorized Uncoiler
Max Coil Weight: 20,000# … [Read more...]
Max Coil Weight: 20,000# … [Read more...]
Max Coil Width: 30"
Variable Speed
Hold Down Arm
Hydraulic Expansion
Variable Speed
Hold Down Arm
Hydraulic Expansion
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 12:33 PM
Industry: General Machinery & Equipment
Description: New: 2023 - 12,000# x 30" wide x .060" thick COLT Space Saver Servo Feed Line
CHDRD-1200-30 Colt Heavy Duty Powered Double End Uncoiler … [Read more...]
CHDRD-1200-30 Colt Heavy Duty Powered Double End Uncoiler … [Read more...]
Max Coil Weight Per Side: 12,000#
Max Coil Width: 30"
Max Coil OD: 60"
Coil ID Range: 19" - 25"
Holddown Arms with Motorized Wheels
Hydraulic Expansion
Motorized Rotation
CKT-1200-30 Colt Heavy Duty Traveling Coil Car
Max Coil Weight: 12,000#
Max Coil Width: 30"
Max Coil OD: 60"
Max Coil Width: 30"
Max Coil OD: 60"
Coil ID Range: 19" - 25"
Holddown Arms with Motorized Wheels
Hydraulic Expansion
Motorized Rotation
CKT-1200-30 Colt Heavy Duty Traveling Coil Car
Max Coil Weight: 12,000#
Max Coil Width: 30"
Max Coil OD: 60"
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 12:23 PM
Industry: General Machinery & Equipment
Description: Hyd-mech s20a, 60 degrees miter
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 11:42 AM
Industry: Other Electrical & Power Equipment
Description: 69 KV insulators Lapp cat # 654512J55494 Drawing # 4512 quantity 8 It is a station post heavy duty insulator. please quote what you have.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 11:00 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 10:43 AM
Industry: General Machinery & Equipment
Description: Vertical Band saw for 8" diameter billets with feed table, hydraulic clamping. Must be in good working condition.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 10:40 AM
Industry: Generators & Engines
Description: Hi there!
We are on the hunt for a Small Condensing Steam Turbine Generator Set for Independent Power Plants. … [Read more...]
We are on the hunt for a Small Condensing Steam Turbine Generator Set for Independent Power Plants. … [Read more...]
Do you produce them?
If so, I am looking for a ballpark estimate on the following: 2 x 1.5Mw units, 4 x 2.5Mw units, 6 x 5Mw units, 7 x 8.5Mw - 10Mw units.
We will be ordering these over the next 26 months.
Can I please get estimates for the units as well as the shipping/transportation and a rough timeline for production/arrival.
Thank you!
%
If so, I am looking for a ballpark estimate on the following: 2 x 1.5Mw units, 4 x 2.5Mw units, 6 x 5Mw units, 7 x 8.5Mw - 10Mw units.
We will be ordering these over the next 26 months.
Can I please get estimates for the units as well as the shipping/transportation and a rough timeline for production/arrival.
Thank you!
%
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 10:31 AM
Industry: Motors - A.C. & D.C.
Description: Could you please assist me with a quotation for the following product?
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 9:42 AM
Industry: Circuit Breakers
Description: LOOKING FOR 250VDC COIL PART # 22D135G3 USED ON THE CONTROL DEVICE FOR GE AK-1-25 CIRCUIT BREAKER
NOTE: COIL # IS THE SAME FOR 230VAC AS WELL
NOTE: COIL # IS THE SAME FOR 230VAC AS WELL
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 9:28 AM
Industry: Other Electrical & Power Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 9:02 AM
Industry: General Machinery & Equipment
Year: 1998
Approx. external size: 8' diameter × 30' overall length
MAWP: 130 PSI at 650°F
ASC Process Systems equipment/controls
Photos attached (a few more available), located in Houston, Texas, looking for offer loaded on your truck.
*** Must be picked up by September 29th. Inquire about requirements for pickup (government facility).
Approx. external size: 8' diameter × 30' overall length
MAWP: 130 PSI at 650°F
ASC Process Systems equipment/controls
Photos attached (a few more available), located in Houston, Texas, looking for offer loaded on your truck.
*** Must be picked up by September 29th. Inquire about requirements for pickup (government facility).
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 8:48 AM
Industry: Processing Equipment
Year: 1998
Approx. external size: 8' diameter × 30' overall length
MAWP: 130 PSI at 650°F
ASC Process Systems equipment/controls
Photos attached (a few more available), located in Houston, Texas, looking for offer loaded on your truck.
*** Must be picked up by September 29th. Inquire about requirements for pickup (government facility).
Approx. external size: 8' diameter × 30' overall length
MAWP: 130 PSI at 650°F
ASC Process Systems equipment/controls
Photos attached (a few more available), located in Houston, Texas, looking for offer loaded on your truck.
*** Must be picked up by September 29th. Inquire about requirements for pickup (government facility).
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 8:38 AM
Industry: General Machinery & Equipment
SERIAL NUMBER: 15072.000
YEAR:
SPECIFICATIONS:
Number of Stands: 12
Line Direction: Right to Left
Spindle Diameter: 3″
Roll Space: 36″
Horizontal Center: 18″
Vertical Adjustment: 6″ – 9″
Base Top to Center Lower Spindle: 7-5/8″
Spindle Key Size: 1/2″
EQUIPPED WITH:
Entry Guide
Roll Tooling
Motor
Electric Panel
Jog Control
YEAR:
SPECIFICATIONS:
Number of Stands: 12
Line Direction: Right to Left
Spindle Diameter: 3″
Roll Space: 36″
Horizontal Center: 18″
Vertical Adjustment: 6″ – 9″
Base Top to Center Lower Spindle: 7-5/8″
Spindle Key Size: 1/2″
EQUIPPED WITH:
Entry Guide
Roll Tooling
Motor
Electric Panel
Jog Control
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 8:37 AM
Industry: General Machinery & Equipment
SERIAL NUMBER: Y113862
SPECIFICATIONS:
Number of Passes: 10
Line Direction: Right to Left
Spindle Diameter: 3-1/2″
Roll Space: 19″
Horizontal Centers: 24″
Vertical Adjustment: 5″ – 12-1/2″
Base Top to Center Lower Spindle: 10″
Spindle Key Size: 7/8″
Gearing Ratio: 16.75:1
EQUIPPED WITH:
100 HP AC Motor – 220/440V, 3 Ph, 60 Hz, 1775 RPM, 260/130 Amps
Entry Guide
Shaft Driven Gearbox Stand
SPECIFICATIONS:
Number of Passes: 10
Line Direction: Right to Left
Spindle Diameter: 3-1/2″
Roll Space: 19″
Horizontal Centers: 24″
Vertical Adjustment: 5″ – 12-1/2″
Base Top to Center Lower Spindle: 10″
Spindle Key Size: 7/8″
Gearing Ratio: 16.75:1
EQUIPPED WITH:
100 HP AC Motor – 220/440V, 3 Ph, 60 Hz, 1775 RPM, 260/130 Amps
Entry Guide
Shaft Driven Gearbox Stand
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 8:36 AM
Industry: General Machinery & Equipment
Description: SPECIFICATIONS: EXCELLENT CONDITION
Maximum Coil Weight: 20,000 Lbs. per side … [Read more...]
Maximum Coil Weight: 20,000 Lbs. per side … [Read more...]
Maximum Coil Width: 48"
Maximum Coil O.D.: 72"
Mandrel Expansion Range: 18.5" - 23.25"
EQUIPPED WITH:
Coil Car
(2) Hold Down Arms
Hydraulic Unit
Motorized Turret, Hydraulic
Motorized Feed, Hydraulic
Hydraulic Expansion & Contraction
Maximum Coil O.D.: 72"
Mandrel Expansion Range: 18.5" - 23.25"
EQUIPPED WITH:
Coil Car
(2) Hold Down Arms
Hydraulic Unit
Motorized Turret, Hydraulic
Motorized Feed, Hydraulic
Hydraulic Expansion & Contraction
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 8:23 AM
Industry: General Machinery & Equipment
Price: 27500
Description: SERIAL ........................ 8960
CAPACITY ...................... 15,000 LBS … [Read more...]
CAPACITY ...................... 15,000 LBS … [Read more...]
MODEL ......................... 1000
YEAR .......................... 03/93
ID EXPANSION .................. HYDRAULIC
MOTORIZED ..................... YES
CONTROL ....................... DANCER ARM
OVERARM ....................... HOLD DOWN
AIR BRAKE ..................... YES
YEAR .......................... 03/93
ID EXPANSION .................. HYDRAULIC
MOTORIZED ..................... YES
CONTROL ....................... DANCER ARM
OVERARM ....................... HOLD DOWN
AIR BRAKE ..................... YES
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 7:37 AM
Industry: General Machinery & Equipment
Description: Vanguard CAK80485D 33” x 204" 2 Axis Flat Bed CNC Lathe (2007)
Fanuc 0i Mate-TC CNC Control, 25" 4 Jaw Chuck, 32" x 191" Centers, (2) Steady Rest(s), (2) Follow Rest(s)
Fanuc 0i Mate-TC CNC Control, 25" 4 Jaw Chuck, 32" x 191" Centers, (2) Steady Rest(s), (2) Follow Rest(s)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 7:34 AM
Industry: General Machinery & Equipment
Description: I’m looking for a used, complete hot-air hopper dryer that can process a 200 lb (90 kg) batch from 7 moisture down to 2in one hour or less.
It must include the hopper, heater, blower, controls, and discharge—not just individual components. … [Read more...]
It must include the hopper, heater, blower, controls, and discharge—not just individual components. … [Read more...]
If you have something suitable, please send the make, model, capacity, condition, power requirements, price, location, availability, and specifications.
Thank you,
Emily
Thank you,
Emily
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 7:32 AM
Industry: General Machinery & Equipment
Description: Accurpress 519012 Accell 190-12 CNC Press Brake (2011)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 7:06 AM
Industry: General Machinery & Equipment
Description: Robotic Welding Cell with Rotary table/Positioner, 30" x 20" x 18" parts
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 17, 2026 at 7:00 AM
Industry: Generators & Engines
Description: want to buy
15,000 to 20,000 gal double wall UL listed diesel fuel tank. … [Read more...]
15,000 to 20,000 gal double wall UL listed diesel fuel tank. … [Read more...]
Could be a combination or two tanks equaling 13,000 to 20,000 Gal total capacity
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 11:05 PM
Industry: Circuit Breakers
Description: S07ED60
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 6:35 PM
Industry: General Machinery & Equipment
Description: 2002 to 2005 Sodick AQ325L, (this year and model only)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 4:44 PM
Industry: General Machinery & Equipment
Description: Press Brake, 400 Ton, 20', would prefer Hydraulic with CNC Backgauge
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 3:15 PM
Industry: General Machinery & Equipment
Description: Bacci Master Jet 5-Axis Machining Center / Router
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 2:18 PM
Industry: Circuit Breakers
Description: 15KV WVB MEB 1200 AMP SWITCH WITH 1200 AMP VACUUM BREAKER METAL CLAD GEAR 60 KAIC N1 OR N3R CUTLER HAMMER
SEE ATTACHED PICTURE FOR REFERENCE
SEE ATTACHED PICTURE FOR REFERENCE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 1:31 PM
Industry: General Machinery & Equipment
Description: Willis BR2.5, 10' x 20" Radial Drill, 20-2180 RPM, Power Clamping, Power Elevation, Coolant
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 1:24 PM
Industry: Other Electrical & Power Equipment
Description: 69 KV Polymer post type insulator. Would also consider porcelain
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 1:07 PM
Industry: General Machinery & Equipment
Description: Late Model Bryant or Technica Center Hole Grinder
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 12:55 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 11:13 AM
Industry: Other Electrical & Power Equipment
Description: Looking for a Woodward ProAct Plus Digital Speed Controller. New or used. Must be in working condition
Part # 8400-055 … [Read more...]
Part # 8400-055 … [Read more...]
Superseded Part # 8400-061
Either of those part numbers will work. Please send me any options you may have.
Thanks,
Either of those part numbers will work. Please send me any options you may have.
Thanks,
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 10:11 AM
Industry: General Machinery & Equipment
Description: Morando K60/65, 21' Vertical Boring Mill, 125 HP, 0.2 - 20 RPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 9:26 AM
Industry: General Machinery & Equipment
Description: Quincy QSI-500 Air compressors. Rotary screw, well maintained with Pneumatech Air Dryer.
• Airflow Capacity: 500 CFM … [Read more...]
• Airflow Capacity: 500 CFM … [Read more...]
• Motor Power: 100 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 9:11 AM
Industry: Circuit Breakers
Description: Looking for at least qty 1 arc chute for 150DH500A 2000A (PN is 403D005G02)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 8:57 AM
Industry: General Machinery & Equipment
Price: 17500
Description: SERIAL .............................. 00204-70
MODEL ............................... 956 … [Read more...]
MODEL ............................... 956 … [Read more...]
AREA OF DUAL BASE ................... 192" X 50"
SPINDLE TRAVEL ...................... 20"
DIAMETER OF SPINDLE ................. 4-1/2"
TAPER IN SPINDLE .................... #5 MT
SPINDLE SPEEDS ...................... (36) 14 TO 1750 RPM
THREADS ............................. 8, 11-1/2, 14, 18,20, & 27 TPI
FEEDS ............................... (18) .004 TO .125 IPR
DISTANCE SPINDLE TO COLUMN .......... 17
SPINDLE TRAVEL ...................... 20"
DIAMETER OF SPINDLE ................. 4-1/2"
TAPER IN SPINDLE .................... #5 MT
SPINDLE SPEEDS ...................... (36) 14 TO 1750 RPM
THREADS ............................. 8, 11-1/2, 14, 18,20, & 27 TPI
FEEDS ............................... (18) .004 TO .125 IPR
DISTANCE SPINDLE TO COLUMN .......... 17
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 8:48 AM
Industry: Transformers
Description: Dry type transformer 30 or 45 kva step up from 460v up to 575v 60hz
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 8:38 AM
Industry: General Machinery & Equipment
Square: 3-3/4″ (95 mm)
Rectangle: 2″ x 4″ (50 x 115 mm)
Maximum Wall: .165″ (4.2 mm)
Cut Tube Lengths: 4″ – 120″ (100 – 3000 mm)
Cut Tolerance: +/- .015″
Maximum Cycle Rate: 2200 per Hour
Line Direction: Left to Right
EQUIPPED WITH:
Push Button Controls
Hydraulic Unit
VICKERS Hydraulic Pump
BIJUR Central Grease System
30 HP Motor: 230 / 460 / 60 Hz / 3 Phase
Target Assembly
20′ Bundle Loader
Conveyor Table
(2) Runout Tables
BURRMASTER Debur
Rectangle: 2″ x 4″ (50 x 115 mm)
Maximum Wall: .165″ (4.2 mm)
Cut Tube Lengths: 4″ – 120″ (100 – 3000 mm)
Cut Tolerance: +/- .015″
Maximum Cycle Rate: 2200 per Hour
Line Direction: Left to Right
EQUIPPED WITH:
Push Button Controls
Hydraulic Unit
VICKERS Hydraulic Pump
BIJUR Central Grease System
30 HP Motor: 230 / 460 / 60 Hz / 3 Phase
Target Assembly
20′ Bundle Loader
Conveyor Table
(2) Runout Tables
BURRMASTER Debur
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 8:37 AM
Industry: General Machinery & Equipment
SERIAL NUMBER: 64 N940 55
SPECIFICATIONS:
Capacity: 12″ x .024″ x .077″ Mild Steel
Maximum Yield Strength: 40,000 PSI
Maximum Width: 12″
Machine Tag Specifications: Max. Thickness: .077″, Min. Thickness: .024″
Number of Work Rolls: 23
Work Roll Diameter: .875″
Number of Adjustable Backup Roll Flights: 3
Pass Line Height: 37″ (w/o Sub-Base)
Line Speed: 60-360 FPM
Line Direction Right to Left
Powered Pinch Rolls
5 HP GE Motor
5 HP GE Speed Variator
SPECIFICATIONS:
Capacity: 12″ x .024″ x .077″ Mild Steel
Maximum Yield Strength: 40,000 PSI
Maximum Width: 12″
Machine Tag Specifications: Max. Thickness: .077″, Min. Thickness: .024″
Number of Work Rolls: 23
Work Roll Diameter: .875″
Number of Adjustable Backup Roll Flights: 3
Pass Line Height: 37″ (w/o Sub-Base)
Line Speed: 60-360 FPM
Line Direction Right to Left
Powered Pinch Rolls
5 HP GE Motor
5 HP GE Speed Variator
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 8:34 AM
Industry: General Machinery & Equipment
Budget: $5,001 - $10,000
Description: Looking for uncoilers in decent condition. Single or doubles, Motorized or not between 8,000-20,000 Pounds.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 8:34 AM
Industry: General Machinery & Equipment
Description: prefer Bullard Cutmaster or similar Webster Bennett Machine ( not Model 75 Cutnmaster )
42 - 50" table 4 Jaw Turret Ram OK may consider decent CNC version … [Read more...]
42 - 50" table 4 Jaw Turret Ram OK may consider decent CNC version … [Read more...]
Thanks
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 8:33 AM
Industry: General Machinery & Equipment
Description: Need a late model 5x10 or 6x12' Bridgemill with Traveling Bridge (Stationary Table)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 7:16 AM
Industry: Generators & Engines
Price: 4500
low hrs. sound enclosed
with ats nema 3
with ats nema 3
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 7:14 AM
Industry: Transformers
60,000 vts. HV
12000 KVA
let me know if you have anythiong
12000 KVA
let me know if you have anythiong
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 16, 2026 at 6:02 AM
Industry: Motors - A.C. & D.C.
Description: 150HP 900RPM TOSHIBA 3/60/460 TEFC 449T 1508SDSB41A-P NEW IN CRATE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 8:41 PM
Industry: Other Electrical & Power Equipment
Price: 3450.00
Description: Cleaver-Brooks 833 03517 Model CB780E Automatic Programming Control for industrial combustion systems. This high-end Honeywell unit, 7800L1095, manages ignition sequencing and flame supervision with precision. Features an integrated keyboard display for diagnostics and status updates, 2019 firmware, and advanced safety features, including gas line pressure checks before ignition to ensure se
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 5:05 PM
Industry: General Machinery & Equipment
Description: 18" x 20" Hyd-Mech Model V18 Series II Vertical Tilt Frame Band Saw, Hydraulic Tilt L-R, (2) Hydraulic Vises, Canted Head, 1-1/4" Blade, Heavy Duty Roller Tables, Coolant, 5 H.P. Drive Motor, 2 H.P. Hydraulic Motor, Inspect under power in central Wisconsin
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 3:56 PM
Industry: General Machinery & Equipment
Description: Ooya RE3-1600 Radial Arm Drill (this make, model and size only)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 3:28 PM
Industry: General Machinery & Equipment
Description: Looking for a 400 Ton Press Brake, Year 2000+
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 3:07 PM
Industry: Circuit Breakers
Description: Need (4) Close Assemblies for small frame 800A - 2000A GE WavePro breaker.
I can use "ANY VOLTAGE"
I can use "ANY VOLTAGE"
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 1:59 PM
Industry: General Machinery & Equipment
Price: $750
Must be able to pick up
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 1:41 PM
Industry: Circuit Breakers
Description: In need of 2 Siemens SF-6 Breakers. Type FA2.20, serial # 30097531-9, close volt 90-140 VDC, Amp. (Nom) 1.9, Trip volt 70-140 VDC, Amp. (Nom) 12.0, Motor Volt (Nom) 120 VAC, Control Diagram B-5705, Instruction Book PB-3638-03, Motor Start Current 25.9, Amps (max), Motor Run Current 12.3, Amps (Max). 72KV
I need to get the exact type.
I need to get the exact type.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 1:22 PM
Industry: Generators & Engines
Price: 100,000 OBO
SN-2829751-SN4745401
1998
950kw
Stamford 1050 kW Continuous Duty 480 Volt
FRAME/CORE HC.I634K2
Class insultation H
1998
950kw
Stamford 1050 kW Continuous Duty 480 Volt
FRAME/CORE HC.I634K2
Class insultation H
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 12:41 PM
Industry: General Machinery & Equipment
Description: Customer needs a Tennant S-30 LP Sweeper or equal-
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 11:57 AM
Industry: General Machinery & Equipment
Price: 9950
Description: SERIAL ...................... WR-2524-SP-4334
MODEL ....................... WR-2524 … [Read more...]
MODEL ....................... WR-2524 … [Read more...]
SERIES ...................... WR
NEW ......................... 1996
TYPE ........................ STAINLESS STEEL CONSTRUCTION
ULTRASONIC WASH TANK ........ 25" X 24" X 15" WATER DEPTH
SPRAY / RINSE TANK .......... 25" X 24"
IMMERSION HEATER ............ 6 KW ELECTRIC
WASH PUMP ................... 10 GPM
RINSE PUMP .................. 1 HP
LIFT / LOWER PLATFORM ....... IN WASH TANK
GENERATORS ..................
NEW ......................... 1996
TYPE ........................ STAINLESS STEEL CONSTRUCTION
ULTRASONIC WASH TANK ........ 25" X 24" X 15" WATER DEPTH
SPRAY / RINSE TANK .......... 25" X 24"
IMMERSION HEATER ............ 6 KW ELECTRIC
WASH PUMP ................... 10 GPM
RINSE PUMP .................. 1 HP
LIFT / LOWER PLATFORM ....... IN WASH TANK
GENERATORS ..................
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 11:33 AM
Industry: General Machinery & Equipment
Description: 2013 Doosan TT-1800SY, Collet Chucks on Main & Sub, Edge Technologies Rebel 102 6' Barfeed, Chip Conveyor
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 11:33 AM
Industry: Generators & Engines
• 277/480V, 3Ø, 60Hz, 1,800 RPM
• Tier 2
====ONLY 44 HOURS SINCE NEW====
• SR5 end
• CAT EMCP 4.2 digital controls
• 1,600-amp main breaker
• Sound-attenuated 85dB, lighted enclosure
• Critical-grade exhaust silencer
• 4,000-gallon UL142 double-wall base tank
• Engine-driven radiator
• Jacket-water heater and circulating pump
• Battery charger & remote annunciator
A complete package - Tested & Ready to Ship
• Tier 2
====ONLY 44 HOURS SINCE NEW====
• SR5 end
• CAT EMCP 4.2 digital controls
• 1,600-amp main breaker
• Sound-attenuated 85dB, lighted enclosure
• Critical-grade exhaust silencer
• 4,000-gallon UL142 double-wall base tank
• Engine-driven radiator
• Jacket-water heater and circulating pump
• Battery charger & remote annunciator
A complete package - Tested & Ready to Ship
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 11:13 AM
Industry: Circuit Breakers
Description: V V C13.8-1000-OGV 15KV VACUUM BREAKER GE ML13 CLOSE TRIP 100V AC
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 10:54 AM
Industry: General Machinery & Equipment
Description: Customer needs a 10" Tube Laser with beveling, 20' magazine.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 10:53 AM
Industry: General Machinery & Equipment
Description: Blansko SK-50A Dual Column CNC Vertical Boring Mill, 187” Table, 228” Swing, 120” Under Rail, Side Head, Siemens CNC
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 10:51 AM
Industry: General Machinery & Equipment
Description: Poreba, Model TR-100B, Heavy Duty Gap Bed Engine Lathe, 42" Swing, 49" Swing in Gap, 20'9" Centers, 630 RPM, 4.25" Spindle Bore, 36" 4-Jaw, (2) 25" Steadies, Inch/Metric
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 10:49 AM
Industry: General Machinery & Equipment
Description: Kitamura MyTrunion 5 Axis Machining Center, 24" Round Table, 20,000 RPM, Fanuc 310i CNC, 50 ATC, Very Low Cutting Hours, New 2017
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 9:37 AM
Industry: Motors - A.C. & D.C.
Description: 250 h.p., 1200 rpm, 588 frame, ODP enclosure, 460 volt, design D, ball/roller bearing motor.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: September 15, 2026 at 9:32 AM
Industry: General Machinery & Equipment
Description: Ermak Model HGS 8.5' X 1/4" Hydraulic Power Squaring Shear (2013)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
