Progressive Cavity Pumps

Moyno pump, Roper style, 316 stainless steel contact parts, model 713025NNC209. Unit has 1" diameter inlet and 3/4" diameter outlet. Unit is driven by 3/4 HP, 90 volt DC drive thru Reliance gearbox. Gearbox output is 1750 RPM to 5.0 ratio drive. Unitized on skid, very good condition, less controller. Serial number ...more

(2) Moyno pump, Roper style, special alloy with PVC plumbing fittings, model 713025NNV-306, spec #PC0528. Unit has 1-1/2" diameter inlet and 3/4" outlet, driven by 3/4 HP drive thru Reliance gearbox with 5.0:1 ratio. Unitized on stand, Serial number G70106., HP: 0.75, Basis: Each, FOB, Inlet and Outlet: 1.50" Inlet x ...more

one(1) used Moyno Progressive Cavity Pump. Model 2L3 CDF3 AAA Serial Number AM2704801 DG 1.5 hp SEW-Eurodrive with AB inverter for variable speed. Inlet: 1.5" Outlet: 1.5".

(5) Moyno pump, Roper style, 316 stainless steel contact parts, model 713025NNC-211. Unit has 1-1/2" diameter inlet/outlet, driven by 3/4 HP Reliance drive. Serial number G-70100., HP: 0.75, Basis: Each, FOB, Inlet and Outlet: 1.50" Inlet x 1.50" Outlet, Contact Parts: 316 Stainless Steel.

Used Moyno Progressive Cavity Pump, Type 3FH2550, stainless steel construction, 1.5" inlet, on portable stainless steel base with 2 HP DC motor, Serial No. AS81818.

Moyno (Robbins & Myers) Progressive Cavity Pump. Model: B1C CDQ 2AAA. Flow rate for new pump is 7.2 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. Baldor Electric Industrial Motor, 0.75 hp, 1750 rpm, 90 V, 7 ...more

Used 2" x 1.5" Robbins and Meyers progressive cavity pump, model 35604, stainless steel construction, with 1 hp, 230/460 volt motor, serial #9-84.

Seepex Progressive Cavity Pump, Size 2-6L, range BN, approximately 10 gallon per minute stainless steel contacts with rubber stator. Unit has 2" inlet, 1-1/2"outlet, driven by 1/2 Hp, 230/460 volt, 1720 RPM drive. one complete with electrical panel, Vacon X series frequency drive. Rated for 160 RPM, 48 bar pressure ...more

Moyno pump, 2", type SSQ, stainless steel, 3 HP, explosion proof drive, 220/440V to Renold Crofts variable speed hydraulic gear drive, ACME thread feed and discharge, 2-1/4" lid., HP: 3, Basis: FOB, Inlet and Outlet: 2" Inlet x 2" Outlet, Contact Parts: Stainless Steel.

Lot of four (4) Seepex cavity pumps, stainless steel contacts, driven by 1/2 HP, 208/230/460 volt, 1720 RPM motor. Pumps are type BCSO, size 5, pressure of 12. Unit has conveying capabilities of 30 i/h - 130 m3/h, pressure up to 24 bar. Unit has 2" inlet and outlet. Previously used at soup processing facility., HP: ...more

Stainless steel Moyno pump, Model number 550 FOR BG, 2" inlet; 2-1/2" x 18" outlet, stainless steel contact parts. Driven by 1.50 HP, 208-230/460 volt, 1740 RPM drive with manual speed control. Unit is mounted on carbon steel frame. Serial number AS65389., HP: 1.50, Basis: FOB, Inlet and Outlet: 2" Inlet x 2.50" ...more

Seepex Progressive Cavity Pump, Size 2, all stainless steel contacts. 2.5" inlet, 2" outlet. Serial number 54884. New in 1990. Currently less motor., Basis: FOB, Inlet and Outlet: 2.50" Inlet x 2" Outlet, Contact Parts: Stainless Steel.

Netzsch Brothers Moyno pump, type NNE40A, stainless steel and carbon steel. Unit has 1 hp drive, 230/460 volt, 1765 rpm, ratio 25.6, maximum output of 164 rpm, minimum 18.2 rpm. Unit has 2-1/2" inlet/outlet x 36" long, mounted on carbon steel frame with 2" x 2" angle legs. Serial number 123285, manufactured new 1981. ...more

Used Robbins & Myers Moyno 3 HP Progressing Cavity Stainless Steel Pump 2-Stage, L-frame pump, Size 6, 2-stage pumping element., Housing is constructed of 316 stainless steel, stator is constructed of EPDM 300, 70 durometer., Pump Inlet: 3" sanitary, Pump Outlet: 2.5" sanitary, Temp Rating: 260 F max. ...more

Brand: SUMITOMO SM-BEIER VARIATOR, BALDOR MOTOR, Condition: USED, "AS-IS", Model: 20 AGY 4:1 (VARIATOR), EM41021 (MOTOR), Type: PROGRESSIVE CAVITY PUMP, Serial: A372664 (VARIATOR), Power Rating: MOTOR: 20 HP, 1175 RPM, 3 PH, 230/460 VOLT, 50/25 AMP VARIATOR: 1165 RPM, 20 HP @ MAX SPEED, 0.28-1.12 SPEED, Weight: ...more

Moyno pump, stainless steel. Unit has a 4" inlet threaded John Perry, 3" outlet with sanitary tri-clamps, 36" long, mounted on a carbon steel frame. Unit has 10 HP, 230/460 volt, 1745 RPM drive. No nameplate data available., HP: 10, Basis: FOB, Inlet and Outlet: 4" Inlet x 3" Outlet, Contact Parts: Stainless Steel.

Moyno stainless steel pump. Unit has a 4" flange inlet, 3" outlet threaded John Perry, 36" long, mounted on carbon steel frame. Unit has 5 HP, 220/440 volt, 1800 RPM drive, no nameplate data available., HP: 5, Basis: FOB, Inlet and Outlet: 4" Inlet x 3" Outlet, Contact Parts: Stainless Steel.

Robbins Myers stainless steel Moyno pump, Model 2FFC10HSJE. Unit is missing the discharge fitting and has one discharge holder, 48" long, mounted on stainless steel square tubing and legs. Unit is driven by 25 HP, 230/460 volt, 1760 RPM, 3-phase drive., HP: 25, Basis: FOB, Inlet and Outlet: 4" Inlet x 4" Outlet ...more

Moyno pump, model 5P8SJQ, 5" diameter inlet/outlet. Unit driven by 2.2 kw (3 HP) motor. Mounted on stainless steel base. Includes spare stainless steel barrel. Previously used in the production of absorbent materials for the cosmetics industry. Serial number AS2092695-1. Very good condition., HP: 3, Basis: FOB, Inlet ...more

Moyno carbon steel pump. Unit has 6" inlet/outlet with 3" discharge reducer, is 24" long. Less drive, no nameplate data available., Basis: FOB, Inlet and Outlet: 6" Inlet x 6"Outlet, Contact Parts: Carbon Steel.

Moyno pump, Progressive Cavity model 2F022C2 CDQ3 AAA, carbon steel auger feed, hopper measures 25-1/2" x 10-1/2" x 10-1/2" deep, 4" diameter x 24" long. Unit is 7.5 hp, 230/460 volt, 3450 rpm, has gear ratio of 84:1., HP: 7.5, Basis: FOB, Inlet and Outlet: 25.50" Diameter Inlet x 4" Outlet, Contact Parts: Carbon Steel.

SKU: 123372, Model: 98-1600, Year: 2019, Condition: Surplus New, Additional :, Flowrate @ 100RPM: 616.42BF/d (98m^3/d), Max. Recommended Lift: 5248ft. (1600m), Includes:, - CAMERON Progressive Cavity Pump 98-1600 HNDR Rotor & Stator.

Used 3" Moyno progressive cavity pump, Frame type 1804L SSO, stainless steel construction, approximately 3" diameter x 60" long barrel, on base with 15 hp, 230/460 volt variable speed motor, serial# AS38222.

Used Moyno 5 HP Progressive Cavity Pump L-Frame, L-frame pump, Size 4, 3-Stage pumping element., Housing is constructed of 316 stainless steel, stator is constructed of Nitrile 100., Typical pump speeds = 68 RPM 680 RPM, Min/Max 1.3 gal/minute to 13.6 GPM, Temp Rating: 50 Min - 160 Max, Pressure Rating: 225PSI Max. ...more