28 Results
Cammann #C-26-SQSS, metal disintegrator, tooling included, 2014
Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cammann
Model: C-26 SQSS
Year: 2014
Make: CAMMAN, Model: C-26 SQSS, Year: 2014, Machine Location: Minnesota, Table: 30″ X 26″, Tapered Holes: 24 -1/2-13 Tapped Holes, Burn Time: 1/4-20 Tap, 1″ Deep, 1 Minute Cutting Time, Voltage: 240, Phase: Single, VA Rating: 15 KVA, HERTZ: 60, Duty Cycle: 50%, Flexi Cutting Head Version V-2, Tooling.
Cammann #C-96, tap disintegrator, Hi/Lo, #13894J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Cammann
Model: C-96
CAMMANN TAP DISENTEGRATOR, STOCK# 13894J, MODEL C96, HI/LO.
Cammann, 15 KVA, 60" arm length, 48" horizontal head travel, 48" vertical travel, 72" under head, power elevation
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Columbia, TN
Mfr: Cammann
EXCELLENT CONDITION-, Variable Power, Power Elevation, 460/3/60 Electrical.
Electro-Arc #1SQT, flame tap burner, 10 KVA, 26 Amps, 60 Hz, 220 V., #1600920
G-2K | Toledo, OH
Seller: G-2K
Location: Toledo, OH
Mfr: Electro-Arc
Model: -1SQT
Serial: 9942, Model: 1SQT, KVA: 10, Voltage: 220, Amps: 26, Hz: 60, Machine Type.Burners Manufacturer.ELECTRO ARC Model.1 SQT Year.N/A Condition.Good.
Electro-Arc #10DVHK, 20 KVA, 440 V., tap disintegrater, sub table, 2017, #160305
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Electro-Arc
Model: 10DVHK
Year: 2017
ELECTRO-ARC TAP DISINTEGRATOR WITH AUTOMATIC DOWNFEED,…"Q" HIGH-PRECISION HEAD, MODEL: 10DVHK… S/N: 15046… NEW: 2017 TABLE WORK SURFACE. 50.5" X″9.5"TABLE CAPACITY. 6,000 LBS.CROSSARMS LENGTH. 48"COLUMN HEIGHT. 60" CUTTING SPEEDS:1/4".1 MIN. ...more
Get email updates for newly added Disintegrators (Including Tap Disintegrators)
Disintegrators (also known as tap disintegrators or metal disintegration machines) are specialized tools designed to remove broken taps, drills, bolts, and other metal components from workpieces without damaging the surrounding material. Commonly used in machining, manufacturing, and maintenance industries, these machines utilize electrical or thermal processes to disintegrate unwanted metal parts. Disintegrators improve efficiency, reduce downtime, and ensure precision in part recovery operations.
Electro-Arc #1S, disintergrator, 10 KVA, 13 amps head 2DV, head rotates, 30x39.5" tbl, Col 50" ht
Century Machinery Co | Los Angeles, CA
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Electro-Arc
Model: 1S
ELECTO ARC METAL DISINTEGRATOR, Model 1S, KVA 10, AMPS 13, TABLE SIZE 30" F-B x 39½" L-R, DISINTEGRATOR HEAD: Type Q, Rotates Left and Right of vertical 90°., Head distance from column: Minimum 10", Maximum 36⅜", Head Vertical Travel by adjustment screw 9", Head travels ...more
Electro-Arc #2DB, metal disintegrator, 440 V.
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Electro-Arc
Model: 2DB
REMOVES BROKEN TAPS, BOLTS & DRILLS IN MINUTES!, ELECTRO-ARC #2DB METAL DISINTEGRATOR, 440 VOLT, MODEL 2-DB, S/N 13473, Dual/Horizontal Crossarms, ARC*ER Current Monitoring Disintegrator Head, Comes with Electrodes and Tips, Manual Downfeed, 2-DB SERIES, s of all our AC tabletop machines:, Tabletop (Work Support) ...more
Electro-Arc #2DBQT, Metal Disintegrator, 10 KVA, 220 VAC, 26 amp, 23.5" x 34.5" table, 5 T-slots with built in coolant trough, S/N 9686
Peterson Machinery Sales | Casa Grande, AZ
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Electro-Arc
Model: 2DBQT
(1) Used 26-Amp Electro Arc Model 2DBQT Metal Disintegrator; S/N 9686, Capacity.1/2" to 3" (est.), Table work area.23.5" x 34.5"W, Work height from floor to table top.30", Work head vertical adjustment.11", Adjustable stop.8", Adjustable swivel.0 to 90 L/R, Adjustable in/out.24", Manual ...more
Electro-Arc #2DBQT, AC Table Top Tap Disintegrator, 10 kVA, .05"-2" capacity, 31" x 31" table
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Electro-Arc
Model: 2DBQT
Electro Arc 2DBQT AC Table Top Tap Disintegrator 10 kVA #6966 #1, Capacity:.05" - 2", Table Work Area: 31" x 31", Max Table Load: 2,000 LBS, Work Height from Spindle to Tabletop: 30", Work Head Vertical Adjustment: 9", Adjustable Stop: 8", Adjustable Swivel: 0 to 90 L/R, Adjustable In/Out: 24", Manual Height ...more
Electro-Arc #2DBQT, metal disintegrator, 15 KVA, 26 Amp, 3" capacity, automatic down feed, 2003
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Electro-Arc
Model: 2DBQT
Year: 2003
Electro Arc Model 2DBQT Metal Disintegrator 15 KVA 26 Amp, REMOVES BROKEN TAPS, BOLTS & DRILLS IN MINUTES!, Capacity.1/8" to 3" (est.), Table work area.23.5" x 34.5"W, Work height from floor to table top.30", Work head vertical adjustment.11", Adjustable stop.8", Adjustable ...more
Electro-Arc #2DBT, tap disintegrator, 10 KVA, 31" x23-1/2" table, variable power feed, #71181
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Electro-Arc
Model: 2DBT
SERIAL. 1939, MODEL. 2DBT, KVA. 10 KVA, WORK TABLE. 31" X 23-1/2", T SLOTS ON TABLE. 4 WITH 4" CENTERS, MAX DISTANCE UNDER HEAD. 36", HEAD TRAVEL. 9", QUILL SWIVEL. 90 DEGREES LEFT & RIGHT, VARIABLE POWER FEED. YES, MANUAL VERTICAL TRAVEL. YES, MAX VERTICAL TRAVEL. 35", MIN VERTICAL TRAVEL. 9 1/2", 1/4" TAP TIME. ...more
Electro-Arc #2SA, 10 KVA, Arc-Er portable head, 26 amps tap / metal disintegrators, 2006
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Electro-Arc
Model: 2SA
Year: 2006
ELECTRO-ARC TAP DISINTEGRATOR MODEL: 2-SA… S/N: 14627… NEW: 2006 TABLE WORK SURFACE.31"W X″1"D MAX. WORKPIECE HEIGHT.36"HMAX. WORKPIECE WEIGHT ON TABLE.2,000 LBS.VERTICAL HEAD TRAVEL.12"APPROX. MACHINE WEIGHT.560 LBS. CUTTING SPEEDS: 0-80 to 10-32. LESS THAN 1 MINUTE1/4". 1 ...more
JUST ADDED!
Electro-Arc #2SE0, tap metal disintegrator
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Electro-Arc
Model: 2SE0
ELECTRO ARC MODEL 2SE0 TAP METAL DISINTEGRATOR~.
Electro-Arc #2SW, Portable Tap Burner Portable disintegrator can be used with a variety of setup configurations, 15 KVA Power Supply 1-1/4" Tap Rating, Portable Tools Cabinet and Cart, EDM
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Electro-Arc
Model: 2SW
KVA 15 Amp 13 Amps Voltage 440v 3-Phase Collets Range 0.0040" - 0.312" s 15 KVA Power Supply (1-1/4" Tap Rating Portable Tools Cabinet and Cart EDM Rods Set Collet sets.
Electro-Arc #300SG, flame tap burner, 10 KVA, 30 Amps, 110 V., #1600820
G-2K | Toledo, OH
Seller: G-2K
Location: Toledo, OH
Mfr: Electro-Arc
Model: 300SG
Model: 300SG, Serial: 9283, Volts: 110, Amps: 30, Cycles: 50/60, Single Phase, Machine Type.Burners Manufacturer.ELECTRO ARC Model.300 SG Year.N/A Condition.Good.
Rietz #RA3-12-K122, versatile, variable speed 45 degree angle disintegrator, 24" OD reduction chamber, (5) sets of 3 impellers, belt driven rear mounted 75 HP motor drive
Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Rietz
Model: RA3-12-K122
Rietz Model RA3-12-K122, versatile, variable speed 45 degree angle disintegrator with pounds of product per hour – depending on materials and application. 24" OD reduction chamber and has (5) sets of 3 impellers 12" OD stacked on top of each othe rwith 24" OD cover and 360 degree reduction screen ...more
Rietz #RA3-12-K122, versatile, variable speed 45 degree angle disintegrator, 24" OD reduction chamber, (5) sets of 3 impellers, belt driven rear mounted 50 HP motor drive
Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Rietz
Model: RA3-12-K122
Rietz Model RA3-12-K122, versatile, variable speed 45 degree angle disintegrator with pounds of product per hour – depending on materials and application. 24" OD reduction chamber and has (5) sets of 3 impellers 12" OD stacked on top of each othe rwith 24" OD cover and 360 degree reduction screen ...more
Rietz #RD-9, Disintegrator Mill, 10" x 7" feed chute, 8" diameter x 8" tall milling section, 10 HP, 220 V.
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Rietz
Model: RD-9
Rietz disintegrator mill, model # RD-9. Unit includes 10" X 7" feed chute leading to 8" diameter X 8" tall milling section. Unit driven by 10 HP, 220V, 3/60Hz Sterling electric motor. Mounted on mild steel frame. Previously used in food operation., HP: 10, Diameter: 9", Type: Vertical Disintegrator Mill, Materials of ...more
Rietz #RD-12, Disintegrator with Hopper, 8" diameter x 2' 5" L auger, 9-1/2" pitch, 20 gallon tank, 1' 10" L x 1' 10" L x 10" H inside straight wall, 30/0.5 HP motors
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Rietz
Model: RD-12
Rietz Disintegrator with Hopper. Model: RD-12. Auger dimensions: 8 in. dia. x 2 ft. 5 in. L. Pitch: 9-1/2 in. Motor, 30 hp, 1770 rpm, 440 V, 40 amps, 60 Hz, 3 phase. Master gear motor, 1/2 hp, 1725 rpm, 220/440 V, 1.6/.8 amps, 60 Hz, 3 phase. Holding tank approximate capacity: 20 gallons. Inside straight wall ...more
Rietz #RD-18-H32, mill, disintegrator, Carbon Steel, 150 HP (3 available)
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Rietz
Model: RD-18-H32
(3) Rietz disintegrator mill, Model RD-18-H32, 18" grinding chamber, carbon steel contact parts, complete with 150 HP, 3550 RPM, 460, 3 phase direct connected motor., HP: 150, Diameter: 18", Type: Vertical Disintegrator Mill, Materials of Construction: Carbon Steel, Basis: Each, FOB.
Rietz Disintegrator, Stainless Steel, 100 HP, with spare screens
Arnold Equipment Co | Twinsburg, OH
Seller: Arnold Equipment Co
Location: Twinsburg, OH
Mfr: Rietz
Rietz, Angle Disintegrator, 12" diameter Blade, 30 HP, 1770 RPM, 208-230/460 V
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Rietz
Bepex Rietz Angle Disintegrator Unit. Stainless steel infeed chute, discharge tank, and level sensor included. Blade diameter: 12 in. US Electricals: 30 HP, 208-230/460V, 1770 RPM, 60 Hz, 3-phase (also rated for 190/380V, 50 Hz). Click here to see a Video #1 Click here to see a Video #2.
Rietz, Disintegrator, 21" ID reduction chamber, (4) Rows of 12" diameter Blade, (3) Screens w/ 3/8" diameter perforations, 50 HP, 460 V
Aaron Equipment Co | Wood Dale, IL
Seller: Aaron Equipment Co
Location: Wood Dale, IL
Mfr: Rietz
used- rietz 12" diameter 45 degree angle disintegrator. 21" id reduction chamber. (4) rows of 12" diameter, (5) hammers stacked on top with each other. (3) 12" diameter stainless steel 360 degrees reduction screens with 3/8" diameter perforations. driven by baldor 50hp, 3/60/460 volt, 3600 rpm direct drive motor. (2) ...more
SEM Security #12HLG, Disintegrator, #3998
Peterson Machinery Sales | Casa Grande, AZ
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Sem
Model: 12HLG
Condition Used Stock Number 3998.
Uni-Tek #325, tap disintegrator, 220 V., 15 amps, single phase, serial #010392, #50502
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Uni-Tek
Model: 325
UNI TEK, MODEL #325, S/N 010392, 220 VOLTS, 15 AMPS, SINGLE PHASE.
Uni-Tek #325-SE, tap disintegrator, serial #121278R, #75095
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Uni-Tek
Model: 325-SE
SERIAL. 121278R, MODEL. 325 SE.
Vankel Disintegration Unit, Model 35-1000
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Vankel
Model: 35-1000
Used Vankel disintegration unit, model 35-1000, serial# 20-826-1095, with water bath.
Tap disintegrator, power arm elevation, power feed, #70267
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
POWER ARM ELEVATION, POWER FEED.
