Also See 1 - 50 of 239 listings
Featured
5/16" Bentech, automatic tube bender, 3" radius, Allen Bradley Micro Logix 1000 Control, serial 60
Century Machinery Co | Los Angeles, CA
Category: Tube and Pipe Benders
Seller: Century Machinery Co
Location: LOS ANGELES, CA
Mfr: Bendtech
Model: SMALL PART PRODUCTION
1 – used BENDTECH AUTOMATIC PNEUMATIC DRIVEN TUBE BENDER, Part Number 92440JA00, Serial Number 605, Machine Control System Model C60023, Serial Number 11921, Condition LIKE NEW, CAPACITY BEND:, Annealed Ferrous or Non Ferrous Tubing. 5/16” diameter, Wall Thickness. 0.065", Bend Radius to Centerline, Angle ...more
Featured
Sahinler #HPK 180, DP roll bender, 2 rolling speeds, horizontal working position, 2018
DTS | Greer, SC
Category: Tube and Pipe Benders
Seller: DTS
Location: Greer, SC
Mfr: Sahinler
Model: HPK 180
Year: 2018
2018 Sahinler HPK 180DP, very nice like new Machine has about 110 bends on it. used to make canopy system, comes with ST & ST** rollers, All Three Rolls are Powered by Hydro-Motors and Planetary Gearboxes Rolls are Hardened Roll Shafts are Special Steel, Hardened and Ground Standard Rolls Handle Many Shapes 3-Axis ...more
.12" x 2" GMC #DB-60A, Hydraulic Rotary Draw Bender
Wheeler Machinery Sales | Pomona, CA
Category: Tube and Pipe Benders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: DB-60A
New GMC Hydraulic Rotary Draw Bender DB-60A, Taiwan Machine, ISO 9001 certified, NC-control for bending angle adjustment, LED degree indicator with automatic stop programming, to get as true reading of bending degree., Up to 50 jobs memory; each job program contains 9 steps, Counter roller holder comes standard with ...more
.168" x 3" Horn #HMT-2STD, Tube Bender, 6 RPM, 10 HP, Model 1AXB+ Control, 2001
Machinery Marketing International | Chicago, IL
Category: Tube and Pipe Benders
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Horn
Model: HMT-2STD
Year: 2001
Used Horn HMT #2STD. This pre-owned Tube Benders is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Horn Tube Benders we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us ...more
1/4" x 2-1/2" CML #060 Super hydraulic bender, 1 HP, electric foot pedal, tooling, 2009
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cml
Model: 060
Year: 2009
SERIAL. 4009033, MODEL. 060 SUPER BENDER, YEAR NEW. 2009', CAPACITY. 1/4" TO 2-1/2", CAPACITY PIPE. 1.500", CAPACITY STEEL TUBE. 2", CAPACITY SOFT BRASS. 1.87", CAPACITY ROUND SOLIDS. 1.25", MINIMUM & MAXIMUM CLR.375" TO 8.875", BENDING SPEEDS. 2, BENDING ANGLE RANGE. 0 TO 180 DEGRESS, PHASE. 1, VOLTAGE. 110 ...more
1/4" Richards #Multiform-Bender, 1/4" x 4" bending roll
Machinery Marketing International | Chicago, IL
Category: Tube and Pipe Benders
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Richards
Model: MULTIFORM-BENDER
Used Richards. This pre-owned Bending Roll is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Richards Bending Roll we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us ...more
1/4" -1-1/2" Ercolina #MB42, rotary draw bender, 1-1/4" Sch 40 Pipe, 1-1/2" Tube
SOMINN Machinery Sales | Dodge Center, MN
Category: Tube and Pipe Benders
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Model: MB42
ERCOLINA (USED) MODEL MB42 ROTARY DRAW BENDER, 1/4" MINIMUM DIAMETER, 1-1/2" MAXIMUM DIAMETER, 2D MINIMUM CLR, (DEPENDING MATERIAL AND WALL THICKNESS), 7-1/2" MAXIMUM CLR, 2 RPM BENDING SPEED, PROGRAMMING, - NC WITH TOUCH PAD, - (10) INDIVIDUAL PROGRAMS WITH, - (9) BENDS WITHIN EACH, 2 HP MOTOR, 460 ...more
Get email updates for newly added Tube and Pipe Benders
Tube, pipe, and bar bending machines are tools used to manually manipulate metal or plastic pipes, tubes, and solid bars into various angles and curves without requiring computer control. These machines are commonly utilized in fields such as construction, plumbing, automotive, and manufacturing, where customized pipe layouts or structural components are needed. Manual benders are particularly valued for their portability, simplicity, and ability to offer precise control over small production runs or bespoke projects.
5/16" Bentech, automatic tube bender, 3" radius, Allen Bradley Micro Logix 1000 Control, serial 60
Century Machinery Co | Los Angeles, CA
Category: Tube and Pipe Benders
Seller: Century Machinery Co
Location: LOS ANGELES, CA
Mfr: Bendtech
Model: SMALL PART PRODUCTION
1 – used BENDTECH AUTOMATIC PNEUMATIC DRIVEN TUBE BENDER, Part Number 92440JA00, Serial Number 605, Machine Control System Model C60023, Serial Number 11921, Condition LIKE NEW, CAPACITY BEND:, Annealed Ferrous or Non Ferrous Tubing. 5/16” diameter, Wall Thickness. 0.065", Bend Radius to Centerline, Angle ...more
5/16" x 2" Dayton #45J342, tube & bar hand bender, 200° bending angle
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dayton
Model: 45J342
MODEL. 45J342, BENDING LENGTH. 2", BAR THICKNESS. 5/16" MAX, BENDING ANGLE. 200 DEGREES.
3/8" Burr Oak #VBHB-M8, hair pin bender, 9"-96" bend length, right hand coil load
General Machinery LLC | Detroit, MI
Category: Tube and Pipe Benders
Seller: General Machinery LLC
Location: Detroit, MI
Mfr: Burr Oak
Model: VBHB-M8
Burr Oak Hair Pin Bender, Model: VBHB M8, CFCL M4, MTCO M2, Minimum Bend Length: 9 Maximum Bend Length: 96, Right Hand Coil Load, Machine Type: Standard 6 Tube Design, Special Options, Stripper Tube Protector *Traveling Rod Support 2 Pcs, Tube Pickoff Tube Collectors, Out Of Tube Sensor Low Oil Sensors, (12) Permanent ...more
1/2" Conrac #401LH, tube bender
AM Industrial | Brook Park, OH
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Conrac
Model: 401LH
Product, Stock Number AM20789 Brand Conrac Capacity 0.50 inches,.5″ Conrac 401LH Tube Bender, CONRAC manual tube bending machine-used-Model: 401 LH Serial: 84230-21:, Maximum tube diameter: 1/2″ (12mm) ODMinimum tube diameter: 1/8″ (3mm)Bending rotation: RH or LHIncludes:, Manual positioning carriage ...more
1/2" Eaton Leonard #VB50HP, tube bender, 80" tube length, Premier Control, PDA, 1993, #58376
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Eaton Leonard
Model: VB50HP
Year: 1993
SERIAL. VB50 HP R098 IPC 0593, MODEL. VB 50 HP, YEAR. 1993, MAX TUBE LENGTH. 80", MAX BEND ARM TRAVEL. 195%, MAX OPERATING SPEED DOB. 30 RPM, POB ROTATION. 40 RPM, CENTERLINE HEIGHT. 1.0", RESOLUTION & REPEATABILITY ANGULAR. + OR -.05%, MAX TUBE SIZE.50" X.085, MAX CENTERLINE RADIUS. 5.25", PREMIER CONTROL. YES ...more
1/2" Integrity Engineering, retube bend machine, 2 bends at a time, machine mounted operator controls
AM Industrial | Brook Park, OH
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Clevleand, OH
Mfr: Integrity Engineering
Capabilities:, Maximum Tube Capacity: 1/2" (Copper) 2-Bends at a time Includes:, Machine mounted operator controls.
1/2" -2" Knuth Hydraulic Tube Bender
Blumberg Machinery Co | Bannockburn, IL
Category: Tube and Pipe Benders
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Working AreaPressure force 11 t Part No. 129112, 10 t capacity6 bending segments3-leg stand.
1/2" PHI #420, Tube Bender, Type II, 8" center line, 120" L, 195 deg. of bend, 3/8" drive key, 2000
Inter-Plant Sales | Hugo, MN
Category: Tube and Pipe Benders
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Phi
Model: 420
Year: 2000
1/2" Pines #107, tube bender
AM Industrial | Brook Park, OH
Category: Tube and Pipe Benders
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Pines
Model: 107
Product, Stock Number AM20788 Brand Pines Capacity 0.50 inches, Pines 3-Axis CNC horizontal tube bending machine, Model: 107Tube: 1/2” x.165” wall (mild steel)Maximum centerline radius: 4″Maximum tube bending rotation: 195 degreesBending Rotation: Left Hand (counter-clockwise)Pedestal type cycle ...more
1/2" Richards, vertical ram-type hydraulic beander, 10 ton, 2 HP, 12" x 30" bed, foot pedal Control
Yoder Brothers Machinery | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Brothers Machinery
Location: Holland, OH
Mfr: Richards
Dimensions30" X 42" X 42" H Weight500 pounds, SERIAL. 238, STYLE. MUB, RAM TRAVEL. 12", CAPACITY. 10 TON, BED AREA. 12" X 30", ORIENTATION. HORIZONTAL OR VERTICAL, CAPACITY. 1/2" X 4"; 5/8" X 3"; 3/4" X 2", ROUND CAPACITY. 1.5", SQUARE CAPACITY. 1.5", PIPE CAPACITY. 2" SCHEDULE 40, ANGLE CAPACITY. 1/4" X 2", NOTCHING ...more
1/2" -5" Rabbit #PR-500-2X, double end tube beader, automatic loader, Allen Bradley PLC, 2001
D & D Industries Inc | Monclova, OH
Category: Tube and Pipe Benders
Seller: D & D Industries Inc
Location: Monclova, OH
Model: PR-500-2X
Year: 2001
MODEL: PR-500-2X, SERIAL #: 44335, 1/2" - 5" CAPACITY, DOUBLE END, AUTO LOADER, ALLEN BRADLEY PLC CONTROLS, NEW COST $50,000, YEAR: 2001, EXCELLENT CONDITION.
1/2" -1" Portable pipe bender with dies, 90° max bending
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
PIPE CAPACITY. 3/8" TO 1", BENDING DEGREE. 90 MAXIMUM, BENDING DIES WITH MACHINE. 3/8",1/2" ,5/8" 3/4" 7/8" & 1.
.625" Eaton Leonard #VB50HP, horizontal tube bender, Light Speed CNC Control,.083" wall thickness, 2004
Galaxie Corporation | Wayne, MI
Category: Tube and Pipe Benders
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Eaton Leonard
Model: VB50HP
Year: 2004
Manufacturer: Eaton Leonard, Model: VB 50 HP, Year: 2004, Max Tube Diameter:.625", Max Tube Wall Thickness:.083", Light Speed Digital Controls.
3/4" Curvatubi #A/25-1, Twin Head Rotary Vertical Tube Bender, Misc Dies, Tag #14705
Yeoman Machinery Corp | Elkhart, IN
Category: Tube and Pipe Benders
Seller: Yeoman Machinery Corp
Location: Elkhart, IN
Mfr: Curvatubi
Model: A/25-1
3/4" Lomar #S1099, rotary draw tube bender, 180° bend, Newall A50 digital read out, operators Control, 1 HP
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lomar
Model: S1099
SERIAL. 12354, MODEL. S1099, CAPACITY STEEL. 3/4" X.049 WALL, MAX. DEGREE OF BEND. 180, BEND RADIUS. 4.00 INCHES, BENDING ARM SPEED. 45 DEGREES PER SECOND, BENDING ARM TORQUE. 350 FT LBS, BENDING ACCURACY. +- 3.0 DEGREES, NEWALL DIGITAL READOUT. A50, OPERATORS CONTROL. YES, PHASE. 1, VOLTAGE. 110, MOTOR HORSEPOWER. 1.
3/4" Pedrick #A3-1, pipe bender, 1-1/4" extra heavy steel pipe capacity, tooling, 3 HP, #71910
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pedrick
Model: A3-1
SERIAL. 9370, MODEL. #A3-1, EXTRA HEAVY STEEL PIPE CAPACITY. 1-1/4", STEEL TUBE - COLD ROLLED WELDED. 1-5/8", SQUARE BAR STOCK CAPACITY. 3/4", ROUND BAR STOCK CAPACITY. 1", BENDING MOMENT (INCH POUNDS). 7500, SPINDLE DIAMETER. 3", WITH TOOLING. YES, HORSEPOWER MOTOR WITH BRAKE. 3.
3/4" Pines #3/4, horizontal tube bender
Holland Equipment Hunters Inc | Hamilton, MI
Category: Tube and Pipe Benders
Seller: Holland Equipment Hunters Inc
Location: Hamilton, MI
Mfr: Pines
Model: 3/4
Type:Tube Machinery, Benders, Pipe, Tube, & BarManufacturer:PINESModel:3/4Condition:GoodStock #:1735Status:For SaleSerial #:106-11A-53-2176.
3/4" Pines #3/4, horizontal tube bender, 1-3/8" x.065" round tubing, 5 HP, 27 RPM, 1967, #12481J
Timco Inc | Columbia, TN
Category: Tube and Pipe Benders
Seller: Timco Inc
Location: Columbia, TN
Mfr: Pines
Model: 3/4
Year: 1967
Pines #3/4 Horizontal Tube Bender, Stk# 12481J Mdl# 3/4 S/N 11010-67266 Year: 1967, CAPACITY ROUND: 3/4" @ SCHEDULE 80, MAX BENDING CAPACITY ROUND TUBING: 1-3/8" X.065, SQUARE TUBING: 1" X.065, BEND ANGLE ACCURACY: /- 1/4 DEG., BENDING ARM SPEED: 27 RPM, MOTOR: 5 HP, OPERATING PRESSURE: 1000 PSI, RESERVOIR CAPACITY: ...more
3/4" Pines #3/4, rotary hydraulic dual tube cutoff bender, Bijur lube, coolant, tooling, #19438
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pines
Model: 3/4
SERIAL NUMBER. 11097-67471, MODEL NO. 3/4, BENDING CAPACITY:, NON FERROUS TUBE YP TO 25,000 PSI. 3/4" OD X.065" WALL, MAX. TUBE LENGTH OVER MANDREL. 11'11", MAXIMUM BENDING RADIUS. 10", BENDING ARM. 20-1/2", BENDING ROTATION. CCW, BENDING CYLINDER. 2" BORE X 8" STROKE, 2' BED EXTENSION. YES, HYDRAULIC ...more
3/4" Pines #3/4, Tube Bender, No Issues, Under Power, hydraulic mandrel extractor, 1985, 3/4
Revelation Machinery | Chicago, IL
Category: Tube and Pipe Benders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Pines
Model: 3/4
Year: 1985
Make: Pines Engineering, Model: 3/4, Year: 1985, Machine Location: Massachusetts, Serial Number: 106-11A-57-2788, Volts: 550v, Phase: 3, Cycle: 60, Full Load Current: 5.64 amps, Pines #1 Bender with Counter Clockwise Rotation 7.5 hp TEFC Motor, Hydraulic Mandrel Extractor, Automatic Slide Lubricator, Digital ...more
3/4" Pines #3/4, Tube Bender, New Allen Bradley Controls, 1985, 3/4
Revelation Machinery | Chicago, IL
Category: Tube and Pipe Benders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Pines
Model: 3/4
Year: 1985
Make: Pines Manufacturing, Model: 3/4, Year: 1985, Machine Location: Massachusetts, NEW Allen Bradley Controls, Serial Number: 11000-98047, Pines G.O: M54346, Volts: 550v, Phase: 3, Cycle: 60, Full Load Current: 14.7 amps, Control Circuit: 110v, Electrical Circuit #: 112-35-993-34, Hydraulic Circuit #: 110-95-992-08 ...more
3/4" Pines #3/4, Tube Bender, No Issues, Multiple Available, Under Power, 1985, 3/4
Revelation Machinery | Chicago, IL
Category: Tube and Pipe Benders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Pines
Model: 3/4
Year: 1985
Make: Pines Engineering, Model: 3/4, Year: 1985, Machine Location: Massachusetts, Serial Number: 11000-73061, Pines G.O: M32565, Volts: 550v, Phase: 3, Cycle: 60, Full Load Current: 6.3 amps, Control Circuit: 110v, Electrical Circuit #: 110-05-993-30, Hydraulic Circuit #: 112-04-992-04, Pines #1 Bender with Counter ...more
3/4" Pines, horizontal tube bender, 5 HP, hydraulic mandrel extractor, 1967
D & D Industries Inc | Monclova, OH
Category: Tube and Pipe Benders
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Pines
Year: 1967
MODEL: ¾", SERIAL #: 11010-67266, YEAR: 1967, CAPACITY ROUND: ¾" @ SCHEDULE 80, MAX. BENDING CAPACITY ROUND TUBING: 1-3/8" X.065, SQUARE TUBING: 1" X.065, BEND ANGLE ACCURACY: ± ¼ DEGREE, BENDING ARM SPEED: 27 RPM, MOTOR: 5 HP, OPERATING PRESSURE: 1000 PSI, RESERVOIR CAPACITY: 41 GALLONS ...more
3/4" Pines, tube bender, counter clockwise, mandrel extractor, pressure die assist
D & D Industries Inc | Monclova, OH
Category: Tube and Pipe Benders
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Pines
NON-FERROUS TUBING 1 ½" OD x.065 WALL, STEEL TUBING 1-3/8" OD x.065 WALL, EXTRA HEAVY PIPE ¾", STAINLESS STEEL TUBING 1-1/8" OD X.065 WALL, STEEL BAR-ROUND ¾" DIAMETER, MAX. RADIUS-STANDARD 10", MAX. RADIUS-EXTRA 18", MAX. TUBE LENGTH OVER MANDREL STANDARD 9'11", MAX. TUBE LENGTH OVER MANDREL ...more
3/4" x 12" Richards, Multiform Hydraulic Bender, 230 V.
Mullin Machinery | Farmingdale, NJ
Category: Tube and Pipe Benders
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Richards
Product, Richards Multiform Hydraulic Bender, Disc Diameter- 12″, Center Hole- 3/4″, Other Holes- 5/8″, Wired 208/230v 3ph, Designed is very similar to a Diacro #8.
1" Baileigh #MPB-275, universal bi-directional scroll bender, PLC control, 2017
Greenway & Associates Ltd | Orange City, IA
Category: Tube and Pipe Benders
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Baileigh
Model: MPB-275
Year: 2017
, Scroll attachment, PLC control, All standard accessories, Manufacturer Baileigh MPB275 Universal Scroll Bender Model MPB-275 Year 2017 Condition Used Serial Number 40-0000 Stock Number 11006 Capacity (solid square) 1" x 1" Capacity (solid round) 1" Bend direction Bi-directional Shipping weight 750 LBS.
1" Curvatubi #B-25, horizontal tube bender, right bend direction, 3-180° bend, 3 HP, #51499
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Curvatubi
Model: B-25
SERIAL. 73215, MODEL. B-25, CAPACITY STEEL TUBE (O.D.).787" O.D. MINIMUM, CAPACITY STEEL TUBE (O.D.). 1" MAXIMUM, CAPACITY STEEL TUBE I.D.691", CAPACITY BENDS TO MAX CLR. 4.920, BEND DIRECTION. RIGHT, BEND ANGLES. 3 TO 180 DEGREES, NUMBER OF BENDS PER HOUR. UP TO 7000, DEGREE OF BEND PER SECOND. 90, TUBE LENGTH STOP ...more
JUST ADDED!
1" DiAcro #6, hydraulic, serial #1560 81337, 230 V., 3 phase
Chrisgo Equipment Co., Inc. | Milford, OH
Category: Tube and Pipe Benders
Seller: Chrisgo Equipment Co., Inc.
Location: Milford, OH
Mfr: Diacro
Model: 6
1" Eaton #VB-25 Elec-RH, tube bender, 2005
D & H Machinery Inc | Toledo, OH
Category: Tube and Pipe Benders
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Eaton
Model: VB-25
Year: 2005
-Model Number: VB-25 Elec-RH, -Capacity: 1" OD x 0.095", -Max. Degree of Bend: 180 Degrees + or -, -Maximum Tube Length over Mandrel: 78", -Control: CNC.
1" Eaton Lenard #VB75-HS Vectorbend, automatic tubing bender Up to 1" outside dimension, 480V 3Ph
Bullseye Industrial Sales LLC | Middlebury, IN
Category: Tube and Pipe Benders
Seller: Bullseye Industrial Sales LLC
Location: Middlebury, IN
Mfr: Eaton
Model: VB75-HS
1" Eaton Leonard #VB-250-ELEC-DR, Pipe, Tube & Bar Benders, 2005
AMM Industries, LLC | Sylvania, OH
Category: Tube and Pipe Benders
Seller: AMM Industries, LLC
Location: Sylvania, OH
Mfr: Eaton Leonard
Model: VB-250-ELEC-DR
Year: 2005
1" Ercolina #1588AR1501000, 1" square former @ 5.9" CLR modified for crush bending
SOMINN Machinery Sales | Dodge Center, MN
Category: Tube and Pipe Benders
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Ercolina
Model: 1588AR1501000
ERCOLINA (USED) 1" SQUARE FORMER @ 5.9" CLR, MODIFIED FOR CRUSH BENDING, 1" SQUARE COUNTER BEND DIE, MODIFIED FOR SHORT CLAMP DISTANCE.
1" Langbow #TM32-2M, twin head tube bender
D & D Industries Inc | Monclova, OH
Category: Tube and Pipe Benders
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Langbow
Model: TM32-2M
ORDER 1, 1" CAPACITY OD, 72" MAX DISCOUNT BETWEEN CENTERS, TWIN HEAD BENDERS, PALM BUTTONS, 94" X 42" X 75" APROX., 2500 LBS APROX..
1" Pines #1, hydraulic bar tube & pipe bender, 5 HP, counter clock wise rotation, hydraulic clamping, #19436
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pines
Model: 1
SERIAL NUMBER. 11045-66245, MODEL. #1, BENDING CAPACITY:, NON-FERROUS TUBE YP TO 25000 PSI. 1-3/4" OD X.120" WALL, STEEL TUBE UP TO 40000 PSI. 1-3/4" OD X.072" WALL, STEEL PIPE SCHEDULE. 80 - 1", STEEL BAR RD UP TO 40,000 PSI. 7/8" DIAMETER, SS TUBE UP TO 60,000 PSI. 1-3/8" OD X.065" WALL, MAX TUBE LENGTH OVER ...more
1" Pines #1, horizontal tube bender,7-1/2 HP,Bijur lube,CCW rotation,17 RPM,#62628
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pines
Model: 1
SERIAL. 1101063392, MODEL. 1, STEEL PIPE, SCHEDULE 80. 1", NON-FERROUS TUBE, Y.P. TO 25K PSI. 1-1/2" X.188", STEEL TUBE, Y.P. TO 40K PSI. 1-1/2" X.109", STAINLESS TUBE, Y.P. TO 60K PSI. 1-3/8" X.065", ROUND BAR, MILD STEEL. 1-1/8", MAXIMUM TUBE LENGTH OVER MANDREL. 9'11", MAXIMUM RADIUS. 8", MAXIMUM BEND ANGLE. ...more
1" Pines #1, Tube Bender, No Issues, Multiple Available, Under Power, 1985, Model 1
Revelation Machinery | Chicago, IL
Category: Tube and Pipe Benders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Pines
Model: 1
Year: 1985
Make: Pines Engineering, Model: Model 1, Year: 1985, Machine Location: Massachusetts, Serial Number: 11010-65011, Pines G.O: 150081, Volts: 550v, Phase: 3, Cycle: 60, Full Load Current: 5.64 amps, Control Circuit: 110v, Electrical Circuit #: 110-04-993-00, Hydraulic Circuit #: 110-04-992-09, Pines #1 Bender with ...more
1" Pines #1, Tube Bender, No Issues, Multiple Available, Under Power, 1985, G
Revelation Machinery | Chicago, IL
Category: Tube and Pipe Benders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Pines
Model: 1
Year: 1985
Make: Pines Engineering, Model: G, Year: 1985, Machine Location: Massachusetts, Serial Number: 11040-70351, Pines G.O: 150081, Volts: 550v, Phase: 3, Cycle: 60, Full Load Current: 5.64 amps, Control Circuit: 110v, Electrical Circuit #: 110-04-993-00, Hydraulic Circuit #: 110-04-992-09, Hydraulic Mandrel Extractor ...more
1" Pines #3/4, hydraulic rotary tube bender, 10" radius, 9'11" tube length, counter clockwise, Bijur one shot lube
G-2K | Toledo, OH
Category: Tube and Pipe Benders
Seller: G-2K
Location: Toledo, OH
Mfr: Pines
Model: 3/4
MACHINE :Maximum Tube Outside Diameter: 1" (25.4 mm)Maximum Radius: 10"Maximum Tube Length: 9′ 11"Standard Operating Pressure: 1,000 PSIBending Arm Speed: 15 RPM; Speed Control ValveRotation: Counter-ClockwiseMaximum Bend Angle: 180 Degrees + OverbendBend Angle Accuracy: + or – 1/4 Degree ...more
1" Pines #5T, Tube Bender, 20 HP, Digital Dial A Bend (4 available)
G-2K | Toledo, OH
Category: Tube and Pipe Benders
Seller: G-2K
Location: Toledo, OH
Mfr: Pines
Model: 5T
Material:Round Tubing: Non-Ferrous, 25,000 psi (two): 1" x.072" (25.4 mm x 1.82 mm)Mild Steel, Y.P. 40,000 psi (two): 1" x.065" (25.4 mm x 1.65 mm)Stainless, Y.P. 60,000 psi (two): 1" x.049" (25.4 mm x 1.24 mm)Square Tube: Mild Steel (two): 7/8" x.035" (22.2 mm x.889 mm)Round Bar: Mild Steel (two): 5/8" (15.8 ...more
1" Pines #5T, tube bender, 5 tons
Universal Tube & Rollform | Perrysburg, OH
Category: Tube and Pipe Benders
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Pines
Model: 5T
UTUBE NUMBER: 2116, MANUFACTURER: PINES, MODEL NUMBER: 5T, SERIAL NUMBER: 44362-77318, YEAR:, Material:, Round Tubing: Non-Ferrous, 25,000 psi: 1″ x.072″ (two), Mild Steel, Y.P. 40,000 psi: 1″ x.065″ (two), Stainless, Y.P. 60,000 psi: 1″ x.049″ (two), Square Tube: Mild Steel: ...more
1" Pines #5T, vertical hydraulic tube bender, 20 HP, pedestal mounted, cooling system, 1986
Aleco Machinery Sales | Milwaukee, WI
Category: Tube and Pipe Benders
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Pines
Model: 5T
Year: 1986
Pines 5T Vertical Hydraulic Tube Bender, SERIAL. 44362-86105, MODEL. 5T
NEW IN. 1986
, CAPACITY TUBING:
NON FERROUS (2) 1" X.072"
MILD STEEL (2) 1" X.065"
STAINLESS (2) 1" X.049"
SQUARE BAR (2) 1/2"
ROUND BAR (2) 5/8"
BENDS PER HOUR 2000 MAXIMUM
MAXIMUM BENDING ...more
1" Pines #5T, vertical hydraulic tube bender, 20 HP, 2000 max bends per hour
Yoder Machinery Sales | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pines
Model: 5T
Year: 1979
SERIAL. #44361-72326, MODEL. #5T, CAPACITY TUBING:, NON FERROUS. (2) 1" X.072, MILD STEEL. (2) 1" X.065, STAINLESS. (2) 1" X.049, SQUARE. (2) 7/8" X.035, ROUND BAR. (2) 5/8", SQUARE BAR. (2) 1/2", BENDS PER HOUR (MAXIMUM). 2000, MAXIMUM BENDING ANGLE. 100 DEGREES, MINIMUM CENTERLINE RADIUS. 2 TO 3 X TUBE DIAMETER ...more
1" Pines #M-04523, bender, foot pedal switch, pedestal stand controls
National Machinery Exchange | Newark, NJ
Category: Tube and Pipe Benders
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pines
Model: M-04523
TUBE SIZE RANGE OD. UP TO 1", MAXIMUM CAPACITY STEEL TUBING. 1" OD x.065" WALL, MAXIMUM BEND ANGLE - NORMAL TOOLING. 140, MAXIMUM BEND ANGLE - SPECIAL TOOLING. 165, TYPICAL PRODUCTION. 1500 BENDS PER HOUR, FOOT PEDAL SWITCH AND, PEDESTAL STAND CONTROLS, MOTOR DRIVE: 20 HP, 230/460V, 3PH, 60CYC, 1750 RPM, WITH ...more
1" Pines, rotary tube bender, #15438
Yoder Brothers Machinery | Holland, OH
Category: Tube and Pipe Benders
Seller: Yoder Brothers Machinery
Location: Holland, OH
Mfr: Pines
1-1/8" Carson #HPA-1A, hydraulic tube bender, 3 HP, 0-185° bend angle, automatic after bend mandrel extraction
Equipment Hub | Stone Mountain, GA
Category: Tube and Pipe Benders
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Carson
Model: HPA-1A
Stock #: 122230042, Location: OH, Brand: Carson, Model: HPA-1A, Serial #: 111033A, Capacity (Copper): 1-1/8" OD, Capacity (Aluminum): 1-1/8" x 065", Capacity (Steel): 3/4" x 049", Mandrel Extraction: Automatic After Bend, Bend Angle: 0 -185 Degrees, Motor: 3HP, Additional Info, Can be inspected ...more
