back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Pellet Mills and Briquetting Machines

19 Results

Andritz #28-TPH, Pallet Mfg. Plant Equipment, (7) 400 HP Pellet Mills w/Conditioners, Pellet, Chip Screens, Hammer Mills, Pellet Cooler, Conveyor, Feeding System, 2014

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Andritz
Model: 28 TPH
Year: 2014
28 Metric Tons Per Hour Wood Pellet Manufacturing Plant Equipment (only slightly used);Complete with the following s and major components: -- (7) 400 HP ANDRITZ Model "26 LM II" Pellet ...more

Andritz #56-TPH, Pellet Mfg. Plant Equipment, (14) 400 HP Pellet Mills w/ conditioners, Fedding, Lube Sys., Screens, 2014

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Andritz
Model: 56 TPH
Year: 2014
56 Metric Tons Per Hour Wood Pellet Manufacturing Plant Equipment (only slightly used);Complete with the following s and major components: --(14) 400 HP ANDRITZ Model "26 LM II" Pellet ...more

California #CL, Pellet Mill, Type 3, 3 HP, VFD Controller, .25 HP Auger Feeder w/ Hopper, On Stand w/ Controls

HGR Industrial Surplus | Euclid, OH | Sales Rep. |
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: California
Model: CL
Used California Pellet Mill Cpm Lab Mill, Model Cl, Type 3, 3 Hp, 460 Volt Main Motor Drive With Vfd Controller,.25 Hp Auger Feeder With Eriez Vibrating Feeder With Hopper, On Stand With ...more

California #CL, Pellet Mill, Type 3, .25 HP Auger Feeder, Eriez Vibrating Feeder, Hopper, Controls

HGR Industrial Surplus | Euclid, OH | Sales Rep. |
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: California
Model: CL

CF Nielsen #BP-5500, briquette press, 75 HP, 3 hammers, 50' cooling line, 2007

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cf Nielsen
Model: BP-5500
Year: 2007
This unit has less than 400-hours and is ready for immediate removal., 75HP Motor long and Short A5 dies, (3) hammers, 50' cooling line, (1) section of curved cooling line, Pucker ...more

Get email updates for newly added Pellet Mills and Briquetting Machines

CF Nielsen #BP-5500, briquette press, Lignin dosing system, 2008

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cf Nielsen
Model: BP-5500
Year: 2008
Nice CF Nielson BP5500 Press. The plant shut down in 2014. The machine was run again for a test in 2016 and everything was in good working condition. They have the dies and pistons to make ...more

La Meccanica Meccanica #CLM800.P.L.G, pellet mill, 200 HP, 600 amp with hopper feeder, conditioner

Perry Videx LLC | Hainesport, NJ | Kathy Kelly |
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: La Meccanica
Model: CLM800.P.L.G
Used La Meccanica pellet mill, Type CLM 800.P.L.G., 200 HP main motor, 600 amp, With hopper feeder, conditioner feeder, force feeder drive into die, S/N C800.1165.10 (2010), Location: ...more

Louis Allis Meccanica TYPE-CLM-800.P.L.G., Pellet Mill, 2010

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: La Meccanica
Model: TYPE CLM 800.P.L.G.
Year: 2010
LA MECHANICA CLM 800.P.L.G. Pellet Mill complete with the following components: -- 200 HP Main drive. -- Hopper Feeder. -- Conditioner. -- Force Feeder.NOTE: &#9679 Taken from a ...more

Munch 12-TPH, Pallet Mfg. Plant, Hammer Hog, Control System, 200 Ton Silo, Cooler System, Sawdust Belt Dryer, Boiler System, Pellet Press, Feed Auger

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Munch
Model: 12 TPH
12 TPH Wood/biomass Pellet manufacturing plant with STELA belt dryer;Complete with the following major components: --SPIROFLOW 14'W x 20' 6-Strand flighted surge bin, 5 HP motor w/ ...more

Richi, complete pellet mills, 10 TPH capacity, with bagging line, 2020 (4 available)

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Richi
Year: 2020
(4) Richi Pellet Mills with 10 TPH Capacity, Each mill has a 220 HP motor, Cooler, Richi Bagging Line, Multiple Richi conveyors and augers available, Optional: Extra hoppers, bins ...more

Ruf #RB440, briquette press, 440 Kg/hr., less than 2500 hours, 2006

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Ruf
Model: RB440
Year: 2006
2006 RUF 440 Briquette Press, 600 voltage, HZ 60, Ampene 45, IP.54, 8000 Hrs, 440kg/hour depending on material Unit is 6ft x 6 ft and 5 ft high Weight approximately 5 tons, Per owner: no ...more

Ruf RUF-1100+, Square Brick Briquette Press, 2600 lb./hr., 15% acceptable moisture, 600 briquettes/hr., 100 HP, 2014

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ruf
Model: RUF 1100+
Year: 2014
(2) RUF 1100+ Briquetter SystemComplete with the following s and components: -- RUF Briquetting Machines are exceptionally strong and low maintenance. The Presses are simple, compact, and ...more

Sprout Waldron #501-D, 200 HP Pellet Mill

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Sprout Waldron
Model: 501-D
Sprout Waldon Pellet Mill Model 501 D, Needs new 200 HP Motor, CME Cooler, CMS Cyclone, Also available from this location: Screens, separators, SS24 shaving mill, Hamer baler.

Sprout Waldron, pellet mill, 125 HP (2 available)

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Sprout Waldron
(2) Sprout Waldron Pellet Mills, 125 HP Motors, Systems were tested - then painted and never put into production., Seller ran wood pellets and pine.

Sprout Waldron, Complete Pellet Mill, (2) Cablevey Bagging Lines, Auto Sealer

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Sprout Waldron
PELLET COMPANY EQUIPMENT, (2) Cablevey Bagging Lines, Auto Sealer for bagging, Bagging System with complete with all conveyors, Mixer to custom blend pellets, 150 HP Sprout, conditioner ...more

Ump BP500A, Briquette Press, 600 Kg/hr., 1700 Kg/cu.cm, Hopper

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ump
Model: BP500A
UMP TECHNIKA Model BP500A Hydraulic Wood Briquetter;Complete with the following s: -- 450 - 600 kG/Hr (550 - 600 briquettes/hour). -- Pressing Maximum 1700 kG per cubic cm; -- Requires ...more

Weima TH-1500-M, Briquette Press, 5.9" x 2.3" rectangular briquette, 55" x 55" hopper, 1413 operating hours, 2015

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weima
Model: TH 1500 M
Year: 2015
WEIMA TH 1500 M Briquette Press (Square Brick): -- Produces 5.9" x 2.3" (150 x 60 mm) rectangular briquette; hopper opening of 55" x 55" (1,400 x 1,400 mm); hopper volume of 2.46 cu/yd ...more

Weima #TH-1500, briquetter w/Nenotech 3012 wrapper, 1000 lbs/hr., 3500 hours, 2014

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Weima
Model: TH-1500
Year: 2014
- Weima TH1500 Briquetter - 3500 Hours - All new wear parts in press (approx $5000) - Produce approx 1000 lbs.hour - Collection bin to the wrapping station: Approx 5'x14 - Nenotech ...more

Complete Operation, pellet mill, 1-2 TPH, 2016

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Year: 2016
This system was installed in 2016. It has low hours and the owner is no longer in the US. Ready to be removed!, - Hopper with chain in the bottom, - Screw feeder from hopper to conditioner ...more