40 Results
AL-INS #MS-10, Stainless Steel Screw Press Separator, 75-100 GPM, 15 HP, 2024
Aaron Equipment Co | Schaumburg, IL
Category: Dewatering Screw Presses
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Al-Ins
Model: MS-10
Year: 2024
used- al-ins screw press separator, model ms-10. stainless steel construction. approx. 75-100 gpm flow rate. 0.25mm screen size. 10" auger size. 10" discharge. driven by a 15hp 3/60/230/460v 1776/37 rpm motor. serial# 0024, built 2024. previously used for juices.
Andritz Dupps #3620, dewatering screw press with Andritz Dupps gear box, 300 HP motor, control panel
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Andritz Dupps
Model: 3620
Used Andritz-Dupps model 3620 dewatering screw press with Falk gear box, 300 HP motor, control panel. Production 205 air dried metric tons per Day or 184 bone dried metric tons per day. Inlet consistency 4.0% BD, discharge consistency 30% BD. Temperature 30-50C, freeness 120-180 ml CSF, PH 7-9, filtrate 2300 ppm ...more
Andritz Dupps #3620, horizontal Stainless Steel dewatering press, 200 TPD
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz Dupps
Model: 3620
105954 One (1) used Andritz-Dupps model 3620 horizontal stainless steel dewatering press. Driven by motor through a Falk gearbox. Capable of handling up to 200 TPD depending on the application.4% inlet consistency. 30% outlet consistency..
Andritz Dupps #3632, dewatering screw press, 304 Stainless Steel, 40 HP motor, reconditioned
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Andritz Dupps
Model: 3632
105111 One (1) reconditioned Andritz Dupps dewatering screw press, Model 3632, T-304 stainless steel construction. With 40 HP motor, 3/60/460V, and Falk gearbox. Reconditioned and never put back into service.
Beloit Jones #P-100, Press Master Screw Press, w/Vibratory Shaker Discharge
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Beloit Jones
Model: P-100
(3) Beloit Jones Model P-100 Pressmaster screw press, Type 2510. Press complete with vibratory shaker discharge. Unit is type 316 stainless steel contact parts. Press is complete with drive, cone, screw, screen, etc. Serial numbers P320R, P510R & P321R. Previously used with Kelp., Materials of Construction: 316 ...more
Get email updates for newly added Dewatering Screw Presses
Dewatering Screw Presses (also known as screw presses, sludge screw presses, or auger presses) use a slowly rotating screw to compress material against a perforated screen basket, continuously separating liquid from solids. They handle high-consistency materials that belt presses cannot, making them common in pulp and paper mills, wastewater treatment, food processing and rendering, and agricultural applications. Popular manufacturers include Vincent, FKC, Thune (Kvaerner/Valmet), Andritz Dupps, and Rietz. Throughput ratings in TPD or lbs./hour and screw diameter are the key specs buyers compare.
Erwepa, Inclined Screw Thickener, 9" diameter, Stainless Steel, w/Motor
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Erwepa
Used Erwepa 9" inclined screw thickener. Stainless steel. With motor., ERWEPA 9".
FKC #SHX-1000, Screw Type Sludge Dewatering Press, 47" x 37" Feed Opening, 9 Screen Secondary, 20 HP, 230/460 V, 1989
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Fkc
Model: SHX-1000
Year: 1989
Used FKC type SHX-1000 sludge dewatering screw press. Serial # M-1340 new 1989-4. 47" X 37" feed opening, 9 screen sections with 3/16" holes with last 2 screens having an additional 1" holes screen on top. Stainless screw with steam Rotary joint. Spring loaded back pressure, 3 chain sprocket, 20 HP Siemens 230/460 ...more
FKC #SHX-1000, sludge dewatering screw press, Stainless Steel, 1984
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Fkc
Model: SHX-1000
Year: 1984
108986 One (1) used FKC type SHX-1000 sludge dewatering screw press. Serial # M-1340, New 1989-4. 47" X 37" feed opening, 9 screen sections with 3/16" holes with last 2 screens having an additional 1" holes screen on top. Stainless screw with steam Rotary joint. Spring loaded back pressure, 3 chain sprocket, 20 HP ...more
JUST ADDED!
French Oil Mill Machinery, Dewatering Screw Press, stainless steel, 1995
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: French Oil Mill Machinery
Year: 1995
110681.007, Used French Oil Mill dewatering, screw press, S/S.
Hymac Thune #SL70SL, Housing, Stainless Steel Frame and Base, 16 Air Operated Back Pressure Flappers
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Hymac
Model: SL70SL
Used Hymac Thune model SL70SL housing. Serial # 896041 stainless steel frame and base. 16 air operated back pressure flappers, stainless steel discharge housing, stainless steel top cover, stainless steel feed housing with bottom screen., HYMAC SL70SL.
Jones #4225, Horizontal Screw Press, 50 HP main drive, 1985
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Model: 4225
Year: 1985
Jones horizontal screw press, Model 4225, all wetted parts being 304 stainless steel. The units are 50 HP main drives, hydraulic cone mechanism, stainless steel main and back-up screens, covers, discharge, drainage pan, unitized, manufactured 1985., Basis: FOB.
Jones #P-100-Pressmaster, Screw Press, w/Vibratory Shaker Discharge
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Model: P-100 PRESSMASTER
Press, screw, Beloit Jones model P-100 Pressmaster, type 2510. Press complete with vibratory shaker discharge. Unit has type 316 stainless steel contact parts. Press is offered completely reconditioned with new liner screens, new main drive bearings, bushings and seals; rebuilt Delroyd gear box; rebuilt Ajax vibratory ...more
Jones #P-200, Press Master Screw Press, w/Vibratory Shaker Discharge
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Model: P-200
Beloit Jones model P-200, Pressmaster, complete with vibratory shaker discharge. Unit has stainless steel contact parts and is offered completely reconditioned with new liner screens, new main bearings, rebuilt Delroyd gearbox, new bushings, seals and wear parts. Unit offered less main motor drive. Serial number ...more
Jones #P-225, Press Master Vertical Screw Press, w/Vibratory Shaker Discharge
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Model: P-225
Beloit Jones Vertical Screw Press, Model P-225 Pressmaster - s stainless steel contact parts and includes a vibratory shaker discharge. Serial number P-485., Basis: FOB.
Jones #P-225, Vertical Screw Press, 20 HP main drive
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Model: P-225
Jones vertical screw press, model P-225, type 2512, with all wetted parts being stainless steel. Unit 20 HP main drive thru gearbox, frac HP, drive on the shaker discharge assembly and air cylinder to operate the solids discharge cone. Include main screens, backup screens, reinforced poly outer doors / covers and ...more
Jones #P-300, Press Master Screw Press, w/Vibratory Discharge
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Model: P-300
Beloit Jones Pressmaster, Model P-300. Includes vibratory discharge system, pneumatic cone, and stainless steel contact parts. Offered less drive motor., Basis: FOB.
Jones, Vertical Screw Press, 6" diameter Liquid discharge, 12" width discharge chute, 10 HP drive
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jones
Jones vertical screw press, series 100S, stainless steel contacts, complete with 10 HP drive. Previously used at grape juice processing facility, running at a rate of 15 TPH. Includes 6" diameter liquid discharge and 12" wide discharge chute. Serial number P-163., Basis: FOB.
JUST ADDED!
JWC Environmental #PLB-9120, Dewatering Screw Press, shaftless spiral, 2 HP mechanical gear drive, screen sections, cleaning shower, 2022
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Jwc Environmental
Model: PLB 9120
Year: 2022
Kvaerner Thune #SP70SL, dewatering screw press 300 Bdmt/d S/s, serial #89-6037
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Kvaerner Thune
Model: SP70SL
Used Kvaerner Thune Mdl. SP70SL dewatering screw press, rated for 300 BDMT/D 16 air operated back pressure valves, internal screw and screens, with Hagglunds Denison hydraulic drive type MA283N011 with MAX pressure 350 bars and MAX speed 42 RPM, 250 hp Siemens Type RGZ-VF2-575 V-motor. 4 inspection windows, stainless ...more
Lamort-Baker #M-16, Inclined Screw Thickener, 16" O.D. x 86" L, 14" x 25" feed/discharge opening, 18.5 kW, 380 V
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Lamort-Baker
Model: M-16
Used Lamort-Baker M-16, 16" inclined screw thickener. Has 16" OD X 86" length. 14" X 25" feed and discharge opening. Stainless steel contact parts. With 18.5kW, 380 volt, 50HZ motor., LAMORT M-16.
Ponndorf #150X402RT, Screw Press, 9" diameter x 106" L screw, 14" x 32" inspection windows, 10.75" X 23.5" inlet, 4.375" bottom outlet, 6.25" pulp discharge, 68 RPM screw, 15 HP, 460 V
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Model: 150X402RT
Ponndorf 9" x 106" screw press, unit includes cylindrical/tapered screw, stainless steel pressing sieve, Model 150X402RT, integrated inspection windows measure 14" x 32" and leaning flaps. Unit is mounted on a sturdy support frame, has 10.75" x 23.50" inlet, screw is 9" diameter x 106" long, has 4.375" bottom outlet ...more
Perrin #CPS-415, Hydraulic Screw Press, 10" diameter Screw, 15 HP Hydraulic Package, 460 V, 1992
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Perrin
Model: CPS-415
Year: 1992
Used Perrin Model CPS-415 Hydraulic Screw Press, 10" diameter screw, Has 15 hp hydraulic package, 460V/3PH/60CYC, 25 FLA, Has controls, Year 1992, Serial #: PSP10-5148, 1992 PERRIN CPS-415.
Rietz #RSP 16-K2, Continuous Horizontal Screw Press, frame only, 25/7.5 HP drive
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Screw Presses
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Rietz
Model: RSP 16-K2
Rietz continuous horizontal screw press frame only, Model RSP 16-K2. Previously a 25 HP U.S. variable speed main drive through heavy duty gear box, 7.5 HP variable speed drive on the rotating cone. Last running apples. Frame only., Basis: AIWI.
Rietz #RSP-16-K2, Continuous Screw Dewatering Press, 16" diameter Screw, 3 HP Cone Motor
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Rietz
Model: RSP-16-K2
Used Rietz model RSP-16-K2 horizontal continuous screw dewatering press. Serial #RSP-722563. 16" diameter screw. Stainless steel contact parts. 3 HP Cone motor. Requires main drive motor and gearbox. Mounted on I-beam steel base., 1972 RIETZ RSP-16-K2.
Thune / Valmet #SP-32, screw press, rebuilt 2021
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Thune
Model: SP-32
Year: 2021
904401.001 Used Thune / Valmet SP32 stainless steel screw press, with a Siemens 75HP, 3/60/230-460 volt, 1780 RPM motor and Falk Mdl. RK2090F 2A, reducer. Rebuilt in 2021 by Valmet.
Thune #SP32L, Dewatering Screw Press, Stainless Steel Covers w/3 Window Design, No Back Pressure Paddles
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Thune
Model: SP32L
Used Thune Kvaerner SP32L screw press for pulp dewatering. Stainless steel covers with 3 window design, no back pressure paddles., Serial # NF8105101/238, THUNE SP32L.
Thune #SP32L, Dewatering Screw Press, Standard Capacity Screw, Stainless Steel Base
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Thune
Model: SP32L
Used Thune SP32L screw press with standard capacity screw and stainless steel base., THUNE SP32L.
Thune #SP45SL, Dewatering Screw
Lenmark Industries | Langley, BC
Category: Dewatering Screw Presses
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Thune
Model: SP45SL
SKU: 113591, Model: SP45SL, Condition: Used, Additional :, Applications Include:, - Removing DCM extractives, - Washing DIP, - Washing high kappa kraft pulp, - Dewatering rejects, - Fiber sludge dewatering, s:, - All wetted parts of high-grade stainless steel, - The pneumatic counter-pressure system with piston-type ...more
Thune #SP45SL, Dewatering Screw
Lenmark Industries | Langley, BC
Category: Dewatering Screw Presses
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Thune
Model: SP45SL
SKU: 112215, Model: SP45SL, Condition: Used, Additional :, Applications Include:, - Removing DCM extractives, - Washing DIP, - Washing high kappa kraft pulp, - Dewatering rejects, - Fiber sludge dewatering, s:, - All wetted parts of high-grade stainless steel, - The pneumatic counter-pressure system with piston-type ...more
Thune #SP70L, horizontal screw press, Stainless Steel, 300 TPD
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Thune
Model: SP70L
1U7684 One (1) used and rebuilt Model SP70L Thune Eureka horizontal screw press. T-316 stainless steel construction. Rated for approximately 300 TPD at 30% - 35% outlet consistency. Capacity and performance will vary according to the specific application. Perforation sizes 1.5 mm for inlet screen, pre-dewatering ...more
Thune #SP70SL, Dewatering Screw Press, Rated 300 BDMT/D, 4 Inspection Windows, 16 Pressure Valves
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Thune
Model: SP70SL
Used Kvaerner Thune SP70SL dewatering screw press, Serial No. 89-6037. Rated at 300 BDMT/D. 4 inspection windows, stainless steel base and housing, 16 air operated back pressure valves, internal screw and screens, with Hagglunds Denison hydraulic drive type MA283N011 with max. pressure 350 bars and max. speed 42 RPM ...more
Vincent #07-0900, screw press, with Stainless steel infeed auger
Lenmark Industries | Langley, BC
Category: Dewatering Screw Presses
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Vincent
Model: 07-0900
SKU: 129765, Model: VP-16-K11, Condition: Used, S/N: 96212, Additional :, Capacity: 20-45 TPD (tons per day), Capacity (lbs/hr): 15,000 - 30,000 lbs/hr, Screw Speed: 10 RPM, Motor Size: 30 HP.
JUST ADDED!
Vincent #CP-6, horizontal Dewatering Screw Press, 6" diameter x 32" screw, 300-1,000 lb./hr., 20 RPM, 5 HP, 152 micron screen, S/N 14375-D, 2019
Aaron Equipment Co | Schaumburg, IL
Category: Dewatering Screw Presses
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Vincent
Model: CP-6
Year: 2019
used- vincent horizontal screw press, model cp-6. 6" diameter x 32" screw. approximate capacity 300-1000 pounds per hour. 20 rpm screw. driven by a 5 hp, 3/60/230/460v nord motor. fed through reducer, ratio 91.81:1. with 152 micron perforated screen. serial #14375-d. built 2019.
JUST ADDED!
Vincent #CP-6, horizontal Dewatering Screw Press, 6" diameter x 32" screw, 300-1,000 lb./hr., 20 RPM, 5 HP, 320 micron screen, S/N 11384-C
Aaron Equipment Co | Schaumburg, IL
Category: Dewatering Screw Presses
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Vincent
Model: CP-6
used vincent cp-6 horizontal screw press 6" diameter dewatering press with 5 hp drive, refurbished available. approximately 6'' diameter x 32'' long screw. approximate capacity 300-1000 pounds per hour, 20 rpm screw. driven by a 5 hp, 3/60/230/460v nord motor. fed through reducer, ratio 68.63:1. with ...more
Vincent #EF-30, sludge press
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Vincent
Model: EF-30
One (1) Used Vincent Mdl. EF-30 Sludge Press All S/S SN 17590-8 MFG 2019 EF-30 Sludge Press HP: 30 CAPACITY GPM: 300-1500 STAINLESS STEEL UNIT MANUFACTURED 2019 Presently installed. Available due to complete plant shut down., 30300-1500.
Vincent #KP-10, Screw Press, 1,500-5,000 lbs./hour, 5-15 HP, 17-28 RPM, 2013
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Vincent
Model: KP-10
Year: 2005
904810PF, Used Vincent Model KP-10, screw press, with motor..
Vincent #TSP-12, Dewatering Screw Press, 64" long twin tapered screws, 20" x 24" feed hopper, 100 HP, 575 Volt
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Vincent
Model: TSP-12
Used Vincent Corporation Model TSP-12, 304 Stainless Steel Twin Screw Press, Has 64 long tapered twin screws, 20 x 24 stainless steel feed hopper with sightglass. Belt driven by. 100 HP motor, 575 volt into a gear reducer. Mounted on steel frame. 304 stainless steel contact parts., VINCENT TSP-12, Material Of ...more
JUST ADDED!
Vincent #TSP-12, Dewatering Twin Screw Press, Stainless Steel, 64" tapered twin screws, 20" x 24" feed hopper, 100 HP, 575 Volt, (2 available)
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Vincent
Model: TSP-12
Used Vincent Corporation Model TSP-12, 304 Stainless Steel Twin Screw Press, Has 64 long tapered twin screws, 20 x 24 stainless steel feed hopper with sightglass. Belt driven by. 100 HP motor, 575 volt into a gear reducer. Mounted on steel frame. 304 stainless steel contact parts., VINCENT TSP-12, Material Of ...more
Vincent #V-16-K11, Dewatering Screw Press, 15,000-30,000 lb/hr, 10 RPM screw, 30 HP, with stainless auger feeder
Savona Equipment | Savona, BC
Category: Dewatering Screw Presses
Seller: Savona Equipment
Location: Savona, BC
Mfr: Vincent
Model: V-16-K11
Vincent VP-16 Screw Press and Auger Feeder, Make: VincentModel: V-16-K11Type: Dewatering Screw PressCondition: Used Condition Model : Rated Capacity: Per Hour: 15,000 - 30,000lb/hrPer Day: 20 - 45 TPDScrew Speed: 10RPMDrive: Electric Motor Power Output: 30HP, Feeder: Screw Conveyor, Construction: Stainless Steel ...more
Vincent #VP-16, Dewatering Screw Press, Stainless Steel, 16" screw diameter, 30 HP TechTop motor, foot-mounted gearbox
Global Equipment International | Chalfont, PA
Category: Dewatering Screw Presses
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Vincent
Model: VP-16
Year: 2019
904805, Used Vincent Corporation Model, VP-16 screw press, The screen is a.010" slot wedgewire., The shaft of the screw is tapered for a 35% reduction in cross-sectional area., This is done to increase dewatering capability. with Tech Top, 30 HP motor., VP Series Screw Presses operate the same as the CP series but are ...more
