36 Results
Featured
Metalfab, Stainless screw auger feeder, 6" diameter, 4' long
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Metalfab
Model: 6
Metalfab Stainless screw auger feeder, 4ft long screw auger discharge, 6” discharge, 10” Top inlet, Overall height 57”- can be reduced, 1HP Baldor electric motor 208-230-460 volts, RPM 1725, Speed reducer ratio: 11, output speed: 156, Torque: 51, Shipping dimensions with pallet: 32” wide x ...more
Featured
Stainless Steel rotating valve feeder, Stainless Steel rotating valve feeder, 27" x 27" inlet
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Top opening 27" w x 27" long+-, Stainless steel wheel and body, Weight: 3,000 LBS., Wheel blade thickness 3/4", 20HP new motor not pictured, Faulk 25.26 to 1 ratio gearbox/speed reducer, Height 32 ½", Approximate Shipping dimensions: width: 36" x length: 80" x height 33" without pallet or motor, MFG. Master ...more
Featured
Feeder hopper, with 85' Superior conveyor, live bottom bin
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Feeder hopper with 85ft Superior conveyor Mclanahan cross belt sampler, 24" x 85' Transfer Superior Conveyor with 15hp Motor running at approx. 400FPM, 100TPH, @60PCF Material. Comes with McLanahan 24" cross Belt Sampler: LHD 18" Wide Enclosure 2-7/16" Dia Shaft, 6" Wide Cutter. 260k tons lifetime use hopper conveyor. ...more
Accurate, 3" feeder, Stainless Steel, #45105
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Accurate
Model: 45105
Used Accurate feeder, stainless steel construction, 3" screw, 1 hp, 230/460 volt main drive, serial # 51012-01A-MECVM.
Accurate #6000, Stainless Steel feeder, serial# 3236701A, #3168-35
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Accurate
Model: 6000
Used AccuRate Feeder, model 6000, stainless steel construction, serial# 3236701A.
Acrison #105Z-B, screw feeder, Stainless Steel, #25922
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Acrison
Model: 105Z-B
Used Acrison Screw Feeder, Model 105Z-B, stainless steel construction, 17" x 11" agitated feed hopper, 2" diameter screw, with 1 HP motor drive, on unitized base, Serial No. 811343.
Acrison #406B-40-1-15-170-00-BB, Loss in Weight Screw Feeder, 8" dia. hopper, 2" dia. screw outlet, 1/4 HP, 208-230/460 V.
Cooper Industries Llc | Greensboro, NC
Category: Gravametric Feeder and Loaders
Seller: Cooper Industries Llc
Location: Greensboro, NC
Mfr: Acrison
Model: 406B-40-1-15-170-00-BB
ITEM 2647: ACRISON LOSS IN WEIGHT LOSS WEIGH SCREW FEEDER STAINLESS MODEL 406B-40-1-15-170-00-BB, WITH CONTROLS, ACRISON LOSS IN WEIGHT SCREW FEEDER, 8” DIAMETER HOPPER INLET W/ LID, 2” DIAMETER SCREW OUTLET, STAINLESS STEEL CONTACT PARTS, MODEL # 406B-40-1-15-170-00-BB, SERIAL # 09401-01, MANUFACTURERS ...more
Acrison #GP403-2500-300-101-H, Gravametric Feeder, Stainless Steel, 1/2 HP, 1750 RPM, 180 V motor
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Acrison
Model: GP403-2500-300-101-H
Used Acrison gravimetric feeder, stainless steel construction.
Get email updates for newly added Gravametric Feeder and Loaders
Gravimetric feeders and loaders (also known as weight-based feeders) are devices that measure and dispense materials by weight, ensuring precise control over feed rates in industrial processes. These systems continuously monitor and adjust the material flow to maintain accuracy, making them essential in industries like plastics, food processing, and pharmaceuticals.
AMF metal wheel feeder, size 20x20, 7.5 HP
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Amf
AMF metal wheel feeder metal wheel size 20"20", Two airlock feeders are available, videos are available with the feeders/airlocks running, Other rubber tip airlocks are available, #3 & 4, 253.
Brabender Technologie Inc. #FF12, fiber feeder, 1/8 HP, 1730 RPM, 230/460 V., 2012
Cooper Industries Llc | Greensboro, NC
Category: Gravametric Feeder and Loaders
Seller: Cooper Industries Llc
Location: Greensboro, NC
Mfr: Brabender
Model: FF12
Year: 2012
ITEM 2865: BRABENDER TECHNOLOGIE INC. FIBER FEEDER MODEL FF12, MODEL: FF12, SERIAL # WO17263/1, YEAR: 2012, DESIGNED TO W3EIGH FEED FIBERGLASS STRANDS OR OTHER TYPE OF FIBERS., ON LOAD CELLS, WITH CONTROL PANEL, CONGRAV OP1 INPUT DISPLAY, APPEARS TO BE IN EXCELLENT CONDITION., FULL DOCUMENTATION AVAILABLE. ORIGINAL ...more
Hymac, tapered plug screw feeder with 100 hp mo
Lenmark Industries | Langley, BC
Category: Gravametric Feeder and Loaders
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Hymac
SKU: 120921, Condition: Used.
K-Tron, vacuum loading stand, mounted on MetoLift lift, Stainless Steel, receiver, #3307-3
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: K-Tron
Used K-Tron vacuum loading stand, stainless steel construction, cone bottom receiver with pulse jet, mounted on MetoLift lift, hoist, model M2050-00, 200 kg capacity, wall mounted, Metolift serial# 7393..
K-Tron Stainless Steel Loss In weigh feeders
Transamerican Equip Co LLC | Tuscaloosa, AL
Category: Gravametric Feeder and Loaders
Seller: Transamerican Equip Co LLC
Location: Tuscaloosa, AL
Mfr: K-Tron
K-Tron SS Loss In Weigh Feeders Consists of:, 3 LIW powder feeders with 2.0 cubic foot hopper, Auger, Outlet downspout, Support stand, DC motor, DC drive, Weight sensors and control panel with digital display, 1 Volumetric feeder with drive and auger, 1 liquid LIW feeder with 2 cubic foot storage tank, Weigh sensor ...more
Lapohn Industrial, bowl feeder, #26912
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Lapohn
Used Lapohn Industries stainless steel vibrating bowl feeder.
Mac #MD20, rotating valve feeder, 8" x 8" inlet, top feed, 90° elbow
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Mac
Model: MD20
Mac 8 " inlet rotating valve feeder, Model: MD 20, Serial #: 98-ALMD-04-041, P.O. # 16076, Inside inlet size: 8" x 8", Has a top feed stainless with vibrating 115 volt, Outlet has 90 degree elbow attached with a 4" diameter ejector pipe- can be removed, U.S. motor: model E183A, ¾ hp ...more
Merrick gravametric belt feeder #496-30SP, 36" diameter x 81" housing, on stand
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Merrick
Model: 496-30SP
Used Merrick gravametric belt feeder, model 496-30SP, approximately 36" diameter x 81" housing, on stand, serial# 17025.
JUST ADDED!
Metalfab, Stainless screw auger feeder, 6" diameter, 4' long
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Metalfab
Model: 6
Metalfab Stainless screw auger feeder, 4ft long screw auger discharge, 6” discharge, 10” Top inlet, Overall height 57”- can be reduced, 1HP Baldor electric motor 208-230-460 volts, RPM 1725, Speed reducer ratio: 11, output speed: 156, Torque: 51, Shipping dimensions with pallet: 32” wide x ...more
Metalfab, screw feeder & continuous better-weigh l, 3" screw, 11-69 RPM
Cooper Industries Llc | Greensboro, NC
Category: Gravametric Feeder and Loaders
Seller: Cooper Industries Llc
Location: Greensboro, NC
Mfr: Metalfab
ITEM 1901: 3” METALFAB SCREW FEEDER AND CONTINUOUS “BETTER-WEIGH” LIVE BOTTOM BIN AND WEIGHING SYSTEM., 304 STAINLESS STEEL CONTACT PARTS. COMPLETE WITH WEIGH CONTROLLER., METALFAB SERIAL NUMBER 608021-4., SCREW FEEDER IS POWERED BY A EURODRIVE DRIVE, VARYING IN SPEED FROM 11 TO 69 RPM., SCREW FEEDER ...more
Plast-Control #GDC+3100AS+3DOS, gravimetric dosing measurment & control, 1999
Aaron Equipment Co | Wood Dale, IL
Category: Gravametric Feeder and Loaders
Seller: Aaron Equipment Co
Location: Memphis, TN
Mfr: Plast-Control
Model: GDC+3100AS+3DOS
Year: 1999
Used- Plast-Control Gravimetric Dosing Measurement & Control System, Model GDC+3100AS+3DOS. Consisting of: (3) Dosing feeders with hoppers and (1) operator panel. Serial # 313651299. Built 1999.
Rader feeder, 16" x 10" metal wheel rotary valve, rebuilt 2004
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Rader
Rader feeder, rebuilt 16 x 10 rader feeder, rader feeder, for sale used airlock., Rebuilt by BMC Industries: date: 6/23/04, BMC SO# 24923, Customer PO# 2003-15121, Rader 10" x 16" metal wheel rotary valve, recent paint, overall height 18 inches, gear motors available. wheel feeder, Rader info: Size 16" ...more
Schenck Accurate #A92-53813501, Loss in Weight Feeder, no screw/tube, 2005
Cooper Industries Llc | Greensboro, NC
Category: Gravametric Feeder and Loaders
Seller: Cooper Industries Llc
Location: Greensboro, NC
Mfr: Schenck
Model: A92-53813501
Year: 2005
ITEM 1658: USED LOSS IN WEIGHT SCHENCK ACCURATE MODEL A92-53813501. MANUFACTURED IN 2005. SERIAL NUMBER 92538-13A-GPE. THIS ITEM IS USED AND CURRENTLY DOES NOT HAVE A SCREW OR TUBE., Item 1658 does not have the screw and tube, but the hopper and housing are set up for the same size screw as 1554 and 1552., PRICE, FOB ...more
Schenck Accurate Mechatron #MODLC-1G-2A, gravimetric feeder, Stainless Steel, 2.5 cu.ft. Stainless Steel hopper extention, load cells, #49223 (2 available)
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Schenck
Model: MODLC-1G-2A
Used Scheck Accurate Mechatron MC gravimetric feeder Type MODLC-1G-2A,.75" diameter discharge screw, stainless steel construction, with approximately 2.5 cu. ft. stainless steel hopper extension, with load cells, serial# 96622-01B-MECGL, built in 2005.
Schenck Schenck #MODMC-1V-2A, screw feeder, Stainless Steel, 3" dia. x 32" long, 19" dia. hopper, (2) 0.5 HP, 230/460 V., 2012
Cooper Industries Llc | Greensboro, NC
Category: Gravametric Feeder and Loaders
Seller: Cooper Industries Llc
Location: Greensboro, NC
Mfr: Schenck
Model: MODMC-1V-2A
Year: 2012
ITEM 1352-1: 3” DIAMETER X 32” LONG SCHENCK ACCURATE SCREW FEEDER, STAINLESS STEEL, TYPE: MODMC-1V-2A, PAC1 SERIAL # VK-1100100181-1.1-500A-MECVM, PDE SER# FILE# Z1W100022, YEAR: 2012, BUILT IN HOPPER MASSAGERS, TWO, 0.5 HP MOTORS, 230/460 V 1.9/.95 A 3 PH 60 HZ, 19” DIAMETER HOPPER, SAMPLE PORT ON ...more
Schenck Mechatron, screw feeder w/feed hopper, 3" screw, 2015
Cooper Industries Llc | Greensboro, NC
Category: Gravametric Feeder and Loaders
Seller: Cooper Industries Llc
Location: Greensboro, NC
Mfr: Schenck
Year: 2015
ITEM 1544: UNUSED 3” SCHENCK MECHATRON SCREW FEEDER. FEEDER TYPE: V632178.801, S/N: 11001-00702-3900A., COMPLETE WITH FEED HOPPER, CONTROL PANEL WITH SIEMENS VFD’S (ITEM 1545), SCREW AND TUBE WITH MOUNTED LOAD CELLS. ITEM IS UNUSED., MANUFACTURED IN 2015., PRICE, EACH, FOB HAW RIVER ...more
Schenck Mechatron, screw weigh feeder, 3" screw, 50 HP, 415 VAC, 2015
Cooper Industries Llc | Greensboro, NC
Category: Gravametric Feeder and Loaders
Seller: Cooper Industries Llc
Location: Greensboro, NC
Mfr: Schenck
Year: 2015
ITEM 1552: 3” SCHENCK MECHATRON SCREW WEIGH FEEDER, UNUSED. FEEDER TYPE: V632178.801, S/N: 11001-00702-2-2500A MID MECH., ITEM IS UNUSED. MANUFACTURED IN 2015, INCLUDES ITEM 1553 VOLUMETRIC CONTROL PANEL. (WILL NEED WEIGHING CONTROLS INSTALLED), INCLUDES SCREW, TUBE, AND SLEEVES (SEE PIC), PRICE, EACH, FOB HAW ...more
Segero, Weighing & Feeding System for Powder, 14 cycle/hr., 120 L & 30 L Hopper volume, 300 kg/hr. Vacuum Loader, 1/2 HP, 220-230 V, for sliced almonds & heated liquid, 2019
Lenmark Industries | Langley, BC
Category: Gravametric Feeder and Loaders
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Segero
Year: 2019
SKU: 104366, Year: 2019, Condition: Used, S/N: 20190909-02-2, Made In: SOUTH KOREA, Dimensions: 92.00 (H) x 34.00 (W) x 41.50 (L) inches, Additional :, Power: 2.2 kW, Phase: 3, Voltage: 220-230 V, Products: 2 type powders, sliced or crushed almond, heated liquid, Speed: 14 cycle/hour, Systems, Agitating Hopper:, - 120 ...more
Segero, Weighing & Feeding System for Powder, 14 cycle/hr., 120 L & 30 L Hopper volume, 300 kg/hr. Vacuum Loader, 1/2 HP, 220-230 V, for sliced almonds & heated liquid, 2019
Lenmark Industries | Langley, BC
Category: Gravametric Feeder and Loaders
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Segero
Year: 2019
SKU: 104386, Year: 2019, Condition: Used, S/N: 20190909-02-1, Made In: SOUTH KOREA, Dimensions: 92.00 (H) x 34.00 (W) x 41.50 (L) inches, Additional :, Power: 2.2 kW, Phase: 3, Voltage: 220-230 V, Products: 2 type powders, sliced or crushed almond, heated liquid, Speed: 14 cycle/hour, Systems, Agitating Hopper:, - 120 ...more
Spiroflow feeder drive, 5 HP, 208-230/460 V., 7" x 14" top opening, 6" discharge
Ingalls Process Equipment | Painesville, OH
Category: Gravametric Feeder and Loaders
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Spiroflow
one(1) used Spiroflow Feeder Drive 5 hp Leeson Motor, mounted to gear reducer 3 phase, 208-230/460 voltage top inspection access opening, 7" x 14" 4.5" diameter receiver for spiral and tube 6" discharge Unit has been test run in our shop.
Syntron #F-010, Magnetic Feeder, #29288
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Syntron
Model: F-010
Used Syntron magnetic feeder, model F010, stainless steel contact parts, with hopper, rated for up to 4 tons per hour, 115 volt, serial# PPE7978993.
Tecweigh, Bulk Weigh Feeder, Stainless Steel, 36" diameter x 5' H hopper, 2" diameter Auger, 1 HP
Machinery & Equipment Co | Brisbane, CA
Category: Gravametric Feeder and Loaders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tecweigh
Tecweigh bulk weigh feeder, includes 36" diameter x 5' high stainless steel hopper. Hopper is agitated and feeds to 2" diameter stainless steel auger driven by 1 HP motor. Hopper and auger are mounted on load cells and frame. Includes mild steel wheels to ride on rail. Includes top mounted Fike pressure relief ...more
Tridyne #6504-A, Weigh Feeder, Stainless Steel, 1-lane, 100 grams capacity, 12" x 20" hopper, 4" width vibratory feeder
Machinery & Equipment Co | Brisbane, CA
Category: Gravametric Feeder and Loaders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tridyne
Model: 6504-A
Weigh feeder, Tridyne, Flex Weigh model 6504-A, capacity of 100 grams, Serial number 1507. Unit s stainless steel hopper, 12" x 20" to vibratory feeders 4" wide to scale chute with automatic release., Maximum Capacity: 100 grams, Materials of Construction: Stainless Steel, Basis: FOB, Pan Dimensions: 4" Wide, Number ...more
Tridyne #F-108, Vibratory Weigh Feeder, 1-lane, 5 lbs max capacity, 12" width x 36" L x 6" H top & 11" width x 10" L x 6" H bottom vibratory feeders, 11" x 6" x 8" weigh hoppers, 60 psig, 115 VAC
Machinery & Equipment Co | Brisbane, CA
Category: Gravametric Feeder and Loaders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tridyne
Model: F-108
Tridyne model F-108 Vibratory Weigh Feeder, rated for max capacity of 5 lbs. All stainless steel contact parts with mild steel frame. s (2) inline vibratory feeders measuring 36" 12" x 6" and 11" x 6" x 10". Unit can be operated manually or automatically. Weigh hoppers measure 11" x 6" x 8" each and can be removed for ...more
Tridyne #F-2000, 2-Lane Net Weigh Scale, Stainless Steel, 5 lbs max capacity, (2) vibratory conveyors, 36" x 12" x 5" & 18" x 3.5" x 6" pan feeders, 9" x 4" x 8" weigh hoppers, 60 psi, 115 V
Machinery & Equipment Co | Brisbane, CA
Category: Gravametric Feeder and Loaders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tridyne
Model: F-2000
Tridyne F-2000 2-Lane Net Weigh Scale, maximum capacity 5 pounds, each side stainless steel contact parts, mild steel frame. Single lane with (2) vibratory conveyors, (2) Pan feeders, size 36" X 12"x 5" and 18" X 31/2" X 6" with Digital Bulk & Dribble Set-Point Controls, Weigh Hoppers size 9" x 4" X 8". PLC ...more
U.S. Motors Metal Works, rotatry feeder, 35" x 45", used metal rotating valve
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Mfr: U.S. Motors
Used 35 x 45 feeder, rotary feeder airlock 35" x 45", 35 x 45" rotary airlock, 45" x 35" rotary valve U.S. metal works ER feeder, used metal rotating valve, Used U.S. Metal Worksfeeder, 35" x 45" rotary feeder airlock, 35" x 45" rotary feeder, helical rotor blades for ...more
Vibra Screw, Feeder, 4", Stainless Steel, 1/2 HP, #26808
Federal Equipment Company | Cleveland, OH
Category: Gravametric Feeder and Loaders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Vibra Screw
Used Vibra Screw volumetric feeder, stainless steel construction, 12" x 16" feed hopper, with Reeves 1/2 HP variable speed drive, 16.8-168 RPM, with 4" diameter outlet, less screw, serial no. 841794.
Metal wheel rotating valve feeder, 19" x 26" inside opening, 5 HP Baldor motor
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Metal wheel rotating valve feeder, Approximate Inside opening: 19" x 26"+, Injector stand 10" diameter outlet, Baldor motor 5hp, 208-230/460 V., frame 184T, Dodge speed reducer: ratio 24.38, size: TXT425BT, part# 244527 DM 61, Has a broken pulley on speed reducer, Feeder shaft diameter: 2 7/8" ...more
Stainless Steel rotating valve feeder, Stainless Steel rotating valve feeder, 27" x 27" inlet
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Top opening 27" w x 27" long+-, Stainless steel wheel and body, Weight: 3,000 LBS., Wheel blade thickness 3/4", 20HP new motor not pictured, Faulk 25.26 to 1 ratio gearbox/speed reducer, Height 32 ½", Approximate Shipping dimensions: width: 36" x length: 80" x height 33" without pallet or motor, MFG. Master ...more
Feeder hopper, with 85' Superior conveyor, live bottom bin
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Feeder hopper with 85ft Superior conveyor Mclanahan cross belt sampler, 24" x 85' Transfer Superior Conveyor with 15hp Motor running at approx. 400FPM, 100TPH, @60PCF Material. Comes with McLanahan 24" cross Belt Sampler: LHD 18" Wide Enclosure 2-7/16" Dia Shaft, 6" Wide Cutter. 260k tons lifetime use hopper conveyor. ...more
Bulk metering feeder surge bin hopper, with weigh chueck, scale & load cells, 2014
Machinery Scene | Toledo, WA
Category: Gravametric Feeder and Loaders
Seller: Machinery Scene
Location: Toledo, WA
Year: 2014
Feeder hopper with weigh check, Scale and load cells, Dump Hopper screw auger feeder, screw auger approx. dems. +-: 12" diameter, 15ft long+-, Screw auger-5 HP Baldor 208/230/460, 3phase, hopper only approximate dems. +-7'8" tall x 13ft long, Load cells were removed before shipping, Built new 2014m, used inside of ...more
