14 Results
3" x 72" Lindberg #HTF5534C, Rotary Tube Calciner, 309 Stainless Steel, 1200°C, spare tube
Federal Equipment Company | Cleveland, OH
Category: Rotary Calciners
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Lindberg
Used 3" Lindberg Rotary Tube Calciner, Model HTF55347C, 3" diameter x 72" long 309 stainless steel shell, 34" long hot zone, rated up to 1,200 c, electrically heated, 230 volt, with model CC5834PBC temperature control panel, 208 volt, with spare 309 stainless steel tube.
JUST ADDED!
3" x 72" Thermcraft #TRT-3-0-24-3C, indirect heated rotary calciner, Inconel 600 tube, 1200°C, electric 9 kW 3-zone, 0-10 rpm variable speed, 2014, lab/R & D, #1272962
Plantex Equipment Co | Alvin, TX
Category: Rotary Calciners
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Thermcraft
Year: 2014
6" x 60" Hight Temperature Rotary Calciner, gas fired
Machinery & Equipment Co | Brisbane, CA
Category: Rotary Calciners
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Calciner, 6" X 5', Custom, stainless steel, Gas-Fired. High temperature rotary calciner, indirect fired, tube measures approximately 6" diameter x 5' long tube on stainless stand. It is gas fired through a fire box around the outside, has a blower on the floor for combustion gases. There is no name plate ...more
6" x 120" Inconel rotary calciner/ rotary kiln tubes, 1/4" wall thickness, 2400°F, 3" discharge (2 available)
Ingalls Process Equipment | Painesville, OH
Category: Rotary Calciners
Seller: Ingalls Process Equipment
Location: Painesville, OH
two(2) Inconel Rotary Calciner / Rotary Kiln Tubes Diameter: 6.5" O.D., 6" I.D. Overall length: 10 feet Material of construction: Inconel 1/4" wall thinkness They were built to be used in a Harper Gas Fired Calciner The calciner was rated for 2,400 F Feed end is open: 6" Discharge end has a 3" ...more
JUST ADDED!
10" diameter x 70" long, rotary calciner, Inconel 600, 2000°F, electric, R & D
Plantex Equipment Co | Alvin, TX
Category: Rotary Calciners
Seller: Plantex Equipment Co
Location: Alvin, TX
Get email updates for newly added Rotary Calciners
Rotary calciners (also known as rotary kilns or calcining kilns) are high-temperature processing machines used to heat-treat materials in a rotating drum. Commonly used in industries like chemical processing, metallurgy, and ceramics, they enable controlled heating to induce thermal decomposition, phase change, or removal of moisture in materials like limestone, minerals, and powders.
14" x 156" Bartlet & Snow, Rotary Kiln, brick line, direct fired, 22" diameter tube, 500,000 BTUH
Federal Equipment Company | Cleveland, OH
Category: Rotary Calciners
Seller: Federal Equipment Company
Location: Cleveland, OH
Used 14" x 13' Bartlet and Snow brick lined rotary kiln, direct fired, approximately 22" diameter tube, 11' hot zone, natural gas fired with 500,000 btu burner and gas train, serial# K4176-D.
JUST ADDED!
14" x 2220" CO Bartlett & Snow, Indirect Fired Rotary Calciner, Stainless Steel tube, 4 heating zones, 1200°F, 3.92-11.8 RPM, variable speed screw infeed
Aaron Equipment Co | Schaumburg, IL
Category: Rotary Calciners
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Co Bartlett & Snow
used-co bartlett & snow indirect fired rotary calciner. it has a 14" diameter tube. the tube is constructed of stainless steel. the hot section is 7'8" long and it has 4 heating zones. the water spray cooling sections is 4'. overall tube length is 18' 5". tube is capable of 3.92 rpm to 11.8 rpm. it is ...more
17" x 192" Inconel tube for rotary calciner or kiln, 15" ID, 1" thick, unused in original crate
Ingalls Process Equipment | Painesville, OH
Category: Rotary Calciners
Seller: Ingalls Process Equipment
Location: Painesville, OH
One (1) unused Inconel Tube for Rotary Calciner May be Haynes 230 or an Inconel material. See breakdown in pictures. 17" O.D., 15" I.D. x 16' long 1" thick In original crate Ni= 51%, Cr = 28.5%, W= 14%, Fe = 4.4.
JUST ADDED!
36" diameter x 480" long, rotary calciner, Inconel, 1830°F, gas fired
Plantex Equipment Co | Alvin, TX
Category: Rotary Calciners
Seller: Plantex Equipment Co
Location: Alvin, TX
JUST ADDED!
Vulcan, Indirect Fired Rotary Calciner, 2 tons/hr., 48" diameter x 282" heated zone, Inconel 600 drum, 1,800°F burner shutdown, (6) gas fired zones, 2024
Perry Videx LLC | Hainesport, NJ
Category: Rotary Calciners
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Vulcan
Year: 2024
Vulcan Drying Systems indirect-fired rotary calciner/kiln system, designed for approximately 2 tons per hour. Drum dimensions are 4' dia. x 23.5' heated zone. Material of drum is Inconel 600 with 1,800F operating temperature., Operating Information:, - Nominal capacity: 2 TPH, - Heating arrangement: indirect ...more
JUST ADDED!
60" diameter x 636" long, rotary calciner, 330 Stainless Steel, 1100°C, gas fired
Plantex Equipment Co | Alvin, TX
Category: Rotary Calciners
Seller: Plantex Equipment Co
Location: Alvin, TX
JUST ADDED!
Feeco, 3-Zone Indirect Rotary Calciner, 2.36 TPH, 304L Stainless Steel, 66" diameter x 600" L, natural gas, (11) burners, Allen-Bradley PLC, 2021
Aaron Equipment Co | Schaumburg, IL
Category: Rotary Calciners
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Feeco
Year: 2021
used- feeco 3-zone indirect rotary calciner system. approximate 2.36 tph throughput. 304l stainless steel construction. 66" diameter x 50' long. 3/8"3/4" shell. 2300 degrees f firebrick, 2600 degrees f ceramic fiber refractory. natural gas combustion with (11) burners. calcium carbonate design material. ...more
JUST ADDED!
996" diameter x 768" long, rotary calciner, Inconel 800HT, 950°C, gas fired, Never Used
Plantex Equipment Co | Alvin, TX
Category: Rotary Calciners
Seller: Plantex Equipment Co
Location: Alvin, TX
Refractory Engineering, Calciner/Kiln, natural gas, (11) 74.2" L each section, (2) 52" x 59" table, 1832°F max temp., (32) burners, 2016
Aaron Equipment Co | Schaumburg, IL
Category: Rotary Calciners
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Year: 2016
used- refractory engineering calciner/kiln, material of construction a3, 304ss, 321ss on product contact and exhaust parts. 11 working sections 1885 mm length each, total 20735 mm long. max temp 1000 deg c. (1832 deg f). max working temp. 950 dec c (1742 deg f.). natural gas operated by 32 burners. incl. fans, piping ...more
