Colloid Mills

, Bematek model CZ-260-PB-10 Stainless Steel inline Colloid Mill/High shear mixer. 2" Inlet/Outlet. S/N 09-4291-F. Driven by Stainless Wash-down 10 HP, 208-230/460 volts, 3500 RPM with 230 volt AC inverter. Last used in sanitary Pharmaceutical plant. Manual for unit available., BEMATEK CZ-260-PB-10, TYPE. COLLOID ...more

One (1) used Charlotte G30 Inline Horizontal Colloid Mill Model: G30 Serial number: 3397R Stainless steel contact parts Rated up to 600 gallons per hour Jacketed housing Conical, grooved rotor and stator All mounted on a heavy duty base 30 HP motor, 3 phase, 230/460V, 3535 RPM, direct driven Unit will be test run in ...more

Charlotte, model SD-40, stainless steel jacketed colloid mill. Rated from 1,200 to 2,400 gallons per hour with partical reduction down to 3-5 microns – depending on materials, application and machine configuration. Designed for pumpable slurry products. 3" OD / 2"ID Tri-clamp fittings and an adjustable ...more

Fryma Model MZ110, stainless steel, toothed, colloid mill with production rates from 300 to 3000 Litres of product per hour – depending on materials, application and machine configuration. 18" ID x 19" Deep stainless steel, connical product hopper with 6"rotor / stator and 3" ID and ...more

Fryma Model MZ110, stainless steel, toothed, colloid mill with production rates from 300 to 3000 Litres of product per hour – depending on materials, application and machine configuration. 18" ID x 19" Deep stainless steel, connical product hopper with 6"rotor / stator and 3" ID and ...more

Used Fryma Stainless Steel Toothed Colloid Mill, Model: MZ130, Year: 2007, Driven by a 25//20 hp motor, 230/460//190/380 volt, 60//50 hz, 3 phase, Used mainly for milling, dispersing and homogenizing liquid to highly viscous material, Capacity range: ~700-7,000 kg/hr, Product fineness range: ~100-500 um, *Only used ...more

Stainless steel jacketed colloid mill, manufactured by Gifford-Wood, model Micro Mill 81, 316 stainless steel contacts. Milling chamber measures 8" diameter X 7" deep tapering to 1" milling hole. Chamber is jacketed and rated for 15 PSI internal. Includes variable speed control. Mounted on stainless steel frame with ...more

Gillford-Wood Eppenbach Model VT7 Colloid Mill, Serial number VT7-BS-630. Includes 10" diameter X 12" deep Jacketed conical hopper with 2" diameter outlet, feeding to Jacketed milling chamber with 1" diameter product discharge. Hopper has clamped top cover with 2" diameter top inlet. Includes manual level for ...more

Used Greerco colloid mill, model W250B80, stainless steel construction, with product hopper, approximately 5 hp xp motor, serial# 40337 0905.

, used Greerco, Giffor-Wood Stainless Steel Colloid Mill Model W250V. On cart with wheels. Rotor and stator have a lot of wear. Driven by 2/1.5 HP XP drive., GREERCO W250V, TYPE. COLLOID MILL, Material. STAINLESS STEEL.

Greeco Model W250V colloid mill capable of complete dispersion and deagglomeration of liquids in liquids or solids in liquids at rates from 5 to 150 Gallons per hour – depending on materials and application. 12" diameter 5 gallon capacity 316 stainless steel hopper with recirculation pipe and bypass valve ...more

, GREERCO Model W500H In-Line Colloid Mill/High Shear Mixer. Horizontally mounted. Has stainless steel adjustable rotor/stator. Portable, on wheels/casters. 10 HP, 230/460 volt, 3470 rpm Explosion Proof motor. Last used in Sanitary Food application. Video of unit running available., GREERCO / GIFFORD-WOOD W500H, TYPE. ...more

Greeco, Model W500V, colloid mill. Capable of complete dispersion and deagglomeration of liquids in liquids or solids in liquids at rates from 100 to 300 gallons per hour – depending on materials, application and machine configuration. 20" diameter x 20" deep (20 gallon capacity) stainless steel hopper ...more

, GREERCO Model W750V In-Line Colloid Mill, high shear mixer. Has stainless steel adjustable rotor/stator. Nominally rated 30-120 gpm depending on gap settings. The rotor-stator gap can be adjusted on-the-fly by turning a hand wheel. Changing the gap setting allows the user to modify the shear rate applied to the ...more

Used Koruma high shear colloid mill, model V 100/25, stainless steel construction, approximately 25 liter capacity feed hopper, stainless steel construction with anchor agitator with side wall scrap driven by.25 kw variable speed motor drive, bottom homogenizer driven by 5.5 dc motor with scr controller mounted on ...more

Colloid mill, Morehouse Industries, model A-200, serial number 242, with 2" diameter stone, direct connected at top 3/4 HP 3/60Hz, 230/460V/3500 RPM motor. Top may be missing. Incomplete unit., HP: 0.75, Chamber Dimensions: 2" diameter, Materials of Construction: Carbon Steel, Basis: FOB.

Patterson Industries colloid mill, size 4TH, type LA, stainless steel. Jacketed bolt on front cover, approx. 6" diameter grooved rotor with stator, 1-1/2" diameter inlet/outlet. Driven by 5 hp, 3/60/208/220 volt, 3840 rpm motor. Manual gap adjustment, includes Waukesha bronze size 2 transfer pump with 1/2" ...more

Premier stainless steel upright colloid mill, model 3UB7. Unit is rated for 30 gpm, manually operated stator/rotor gap adjustor, stator head is jacketed for cooling, 1" inlet and 1" outlet, driven by 5 hp, 208/220/440 volt, 3 phase, 3500 rpm drive, approx. 7200 rpm., HP: 5, Materials of Construction: Stainless Steel ...more

Premier Mill Model KSIF, colloid mill with number of gallons per hour – depending on materials and application. 3" rotor, 7.5 gal – 1 cubic foot hopper, 1-1/2" tri-clover connections and 18" discharge, 5 Hp drive and mounted on (4) leg base frame with casters. Gap settings down to ...more

Romaco Model MZ100, stainless steel, toothed colloid mill with production rates from 200 to 2,000 kg’s of product per hour – depending on materials and application. 16" OD x 19" Deep stainless steel, connical product hopper with lift off cover. 2-1/2" sanitary side port, with recirculation ...more

Used Romaco FrymaKoruma Toothed Colloid Mill type MZ. Model: MZ 250 / R. Serial number: M10561. Year: 1984. Fryma-Maschinen AG Switzerland. Nominal throughput: 4,000-40,000 KG per hour depending on application (8,800-88,000 lbs/hr). Designed for milling, dispersing, and homogenizing liquid to highly viscous materials. ...more

Tri-Homo Corp. Laboratory Colloid Mill. Type: Champ LD. S/N: 54-07. Through put capacities range from 2-15 gph depending on viscosity of product. Size 2-1/2 in. 1 in. inlet, 1 in. outlet. US Electrical, 1 hp, 3,600 rpm, 220/440 volt, Cycles: 60, 2.6/1.3 amps, 2 phase, Frame: 66-2, Type: SC, S/N 2318678, unit on ...more