1 - 50 of 132 listings
Bakers Aid #GMB-1/2, Bread Slicer, 16" width, 33" feed section, 30 Blades, 1/2" Slice, 115 V, 7.5 Amp, 1/2 HP
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Bakers Aid
Model: GMB 1/2
Bread slicer, manufactured by Bakers Aid, Model GMB 1/2, with 16" wide slicing area, with 33" long feed section, 30 serrated blades with 1/2" spacing. Unit is mobile is casters. Mild steel frame with all stainless steel contact parts. Single phase, 115 V, 60 Hz, 7.5 amp, 1/2 HP motor. Serial number 9214-1326-01292. ...more
Boss #40A, Bowl Chopper, 6" deep x 34" diameter Choppers, 7.5 HP, 220/440 V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Boss
Model: 40A
Boss bowl chopper, model 40A, with carbon steel contact parts. Bowl is 6" deep x 34" diameter and choppers driven by 7. 5 HP, 220/440 volt motor. Chopper is unitized on portable locking wheel stand, very heavy duty. Unit is in good condition. Serial number 40C30A., Basis: FOB.
Buffalo #66BX, grinders slicer/dicer
Genemco | Hearne, TX
Category: Industrial Food Cutters and Slicers
Seller: Genemco
Location: Hearne, TX
Mfr: Buffalo
Model: 66BX
Buffalo No. 66BX Grinder. This is the wetted end of the grinder. The gearbox and base are missing.
Carruthers #MS13001, Dicers, 20000 lbs/hr., 30" width conveyor, 1/4"-6" unequal flexibility cut, 30-212 F
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Carruthers
Model: MS13001
Carruthers dicers, Model MS13001. All stainless steel contacts, high volume slicer/dicer for fresh, raw or pre-cooked meats as well as many other products at a rate of 20,000 pounds per hour depending on product per cutting, 30" (750mm) wide, continuous flow conveyor, unequal flexibility cut from 1/4" (6mm) to over 6" ...more
Chisholm Ryder #PST542C, green bean cutter
Genemco | Hearne, TX
Category: Industrial Food Cutters and Slicers
Seller: Genemco
Location: Hearne, TX
Mfr: Chisholm Ryder
Model: PST542C
Chisholm Ryder Bean Cutter. Model: PST542C. S/N: BST542C. Infeed hopper dimensions: 2 ft. L x 1 ft. 8 in. W. Drum dimensions: 2 ft. dia. x 6 ft. 11 in. L. Flight dimensions: 11-1/2 in. L x 11-1/2 in. W. Flight pitch: 2 in. (2) 6 ft. 11 in. W x 2 ft. 5 in. H access doors. Sterling Electric Motor, 3/4 hp, 1730 rpm ...more
Get email updates for newly added Industrial Food Cutters and Slicers
Industrial food cutters and slicers (also known as food processing cutters or slicing machines) are specialized machines designed for efficiently processing large volumes of food products in commercial kitchens and food processing facilities. By performing tasks such as cutting, slicing, and dicing, these machines ensure uniformity and consistency in product size and shape. Essential for high production standards, industrial food cutters and slicers help meet the demands of large-scale food production.
CMI Equipment & Engineering Co., precision trimmer for topping & tailing, 20-65 count per minute, automatic adjusting blades
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Cmi
CMI Equipment, precision trimmer for topping and tailing. Rated from 20 to 65 count per minute with capacity of over 3,000lbs per hour – depending on materials, application, machine configuration and operator dexterity. a 48" long load area, product holders set on 10" centers, automatic adjusting ...more
Commercial #Buzz Cutter, Pineapple Cutter, dual head buzz cutter, 12" x 16' feed conveyor, 36" x 22' & 16" x 10' belt conveyor
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Commercial
Model: BUZZ CUTTER
Pineapple cutter, dual head buzz cutter, manufactured by Commercial. Includes 12" x 16' feed conveyor, 36" x 22' belt conveyor, 16" x 10' belt conveyor, cleated belt conveyor, motor control panel, operator platform, etc. Unused. Crown removal system is designed to remove pineapple crowns with minimum ...more
Commercial, Chopper Mill, Stainless Steel, 38.5 L x 10.5 width x 21" deep, 3 HP, 1750 RPM, 208-230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Commercial
Commercial chopper mill, stainless steel, 38-1/2" long x 10-1/2" wide, 21" deep, 3 HP 208-230/460V motor, 1750 RPM, 60Hz includes spray bar. Serial number P7969188., HP: 3, Chamber Dimensions: 10-1/2" Wide x 38-1/2" Long, Basis: FOB.
Commercial, Pineapple Slicer, Dual Head Buzz Cutter, 12" x 16' feed conveyor, 36" x 22' & 16" x 10' belt conveyor
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Commercial
Pineapple cutter, dual head buzz cutter, manufactured by Commercial. Includes 12" x 16' feed conveyor, 36" x 22' belt conveyor, 16" x 10' belt conveyor, cleated belt conveyor, motor control panel, operator platform, etc. Unused. Crown removal system is designed to remove pineapple crowns with minimum ...more
Convenience Food Systems #VSM-325, Food Sliber & Processor, 325L/Batch, 12 Bladed
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Convenience Food Systems
Model: VSM-325
Kramer Grebe / Convenience Foods Systems, vacuum bowl chopper and mixer, for cutting, mixing and emulsifying product up to 325 liters per batch – depending on materials and application. All 304 stainless steel construction. 70" OD x 40" high (to top of cover) mixing chamber, 9-1/2" top port, with ...more
Custom Engineering & Fabrication Co #S-36, Stainless Steel brush peeler, 8 rotary brushes
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Custom Engineering
Model: S-36
Custom Engineering & Fabrication Co, Model S-36, stainless steel brush peeler. a stainless steel inclined belt with 2" high cleats feeding into a 20" x 16" product charge, 16" diameter x 18" long auger moves product into 70" long peeler chamber with (8) rotary brushes, 20" OD ...more
Dixie #SL-450, Uni-Slicer, Stainless Steel, (3) 420 mm diameter Slicing blades, 120-600 slices/min., 150 mm x 240 mm x 800 mm L max product dimension, 0.4-50 mm slice thickness, 200-400 V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Dixie
Model: SL-450
Slicer, Dixie uni-slicer, Model# SL-450, stainless steel construction, set up for high capacity, high performance slicing and portioning control. Includes (3) 420mm diameter slicing blades, rated between 120 - 600 slices/minute. Capable of 150mm x 240mm max product dimensions, 800mm max product length & 0.4 - 50mm ...more
Eillert #BL-1000-VAR, Dicer, 230 V, includes rotary feed to stationary crosscut knife assembly
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Eillert
Model: BL 1000 VAR
Eillert dicer, Type BL 1000 VAR, machine number 157. Unit includes rotary feed to stationary crosscut knife assembly with adjustable spacing. Requires circular knife assembly and stripper plate. Includes controls and main drive. Driven by 2-phase, 230 V motor. Previously used in food operation., Basis: FOB.
F.I.R.M. Inc., slicer, tip & tail cutter, topper, blue belting w/low profiel cleats, 16" wide belt, 12" blade
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: F.i.r.m. Inc.
Slicer for cutting elongated vegetables with the ability to top / tail products, manufactured by F.I.R.M. Inc. Offered with blue belting including low-profile cleats, spaced at 1-1/2", to align products to the far side of the conveyor before passing through the slicing blade. It includes a small stainless steel feed ...more
FAM #ILC, all Stainless Steel construction, slices, strip cuts and dices up to 2205 pounds of product per hour
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Fam
Model: ILC
FAM Model ILC, all stainless steel construction, slices, strip cuts and dices up to 2,205 pounds of product per hour – depending on materials and application. 18" x 17" stainless steel product feed hopper, 11" OD product port to processing chamber, and has combination of 3 cutting tools for ...more
Fitzpatrick #R, circular knife slitter, 12" x 3" feed throat, 12" x 12" grated charge
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Fitzpatrick
Model: R
Fitzpatrick, Model R, circular knife slitter. a 12" x 12" grated charge, 12" x 3" feed throat, 12" wide x 6" diameter circular knife drum with blades set on ¼" centers, 12" wide x 8" diameter contact drum and 6"ID / 8"OD flanged discharge with ...more
G J Olney #4, precision trimmer for topping & tailing, 20-65 count per minute (2 available)
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: G J Olney
Model: 4
G J Olney, precision trimmer for topping and tailing. Rated from 20 to 65 count per minute with capacity of over 3,000lbs per hour – depending on materials, application, machine configuration and operator dexterity. Adjusts automatically so that only the ends of the product are trimmed with a minimum of overcut ...more
Garoutte, Tipper/Topper Carrot Cutter, (2) 10" diameter Sawtooth blades on 4" centers, 7' L conveyor, 6" width nylon tabletop chain w/7" width cleats, 1/2 HP, 1800 RPM
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Garoutte
Garoutte tipper/topper cutter. Includes (2) 10" diameter sawtooth blades on 4" centers driven by 1/2 HP 1800 RPM motor. Cutter is fed by 6" wide nylon tabletop chain with 7" wide cleats (12" wide bed), 7' long conveyor driven by 3/4 HP gearhead. All stainless-steel contacts with exception of the nylon chain. On ...more
Gemac #Hydraflaker, Stainless Steel, frozen block breaker & slicer, 1-3 blocks/min, 8 blades w/flip up lock down safety cover
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Gemac
Model: HYDRAFLAKER
Gemac Model hydraflaker, stainless steel, frozen block breaker and slicer rated from 1 to 3 blocks per minute – depending on materials and application. Block sizes up to 24" in Length: 24" in width; 10" in Height, Temperatures down to 0 Deg F and can reduce product down to 1/4" thick in 18 to ...more
Genmac #FS-10-C, hydrauflaker slicer
Genemco | Hearne, TX
Category: Industrial Food Cutters and Slicers
Seller: Genemco
Location: Hearne, TX
Mfr: Genmac
Model: FS-10-C
Machinery Corporation Hydrauflaker Slicer. Model: FS-10-C. S/N: 499. Rotating cutting drum dimensions: 12 in. dia. x 29 in. L. Cutter dimensions: 4 in. L x 1-1/2 in. W. Maximum aperture/clearance: 33 in. L x 6 in. H. Teco-Westinghouse Motor, 7-1/2 hp, 1755 rpm, 230/460 V, 24.9/12.4 amps, 60 Hz, 3 phase. Baldor ...more
Grote #200-D-100, Stainless Steel commercial cheese shredder, 2500 to 4500 lbs cheese/hr., 6" belt, 14" x 9" tall conveyor opening
Equipment Recovery Corp | Willoughby, OH
Category: Industrial Food Cutters and Slicers
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Grote
Model: 200-D-100
Brand: GROTE, Condition: USED, "AS-IS", Model: 200-D-100, Type: CHEESE SHREDDER, Serial: 1043891, Power Rating: -, Weight: APPROXIMATELY 2,000 LBS., Category: OTHER, ERC #: MO-3655, Job #: 069, Shipping Dimensions: 90" x 80" x 63", Additional Notes: MACHINE CAN TAKE 20 LB BLOCKS OF CHEESE, 2500 TO 4500 LBS. OF CHEESE ...more
Grote #613, Stainless Steel multi-slicer, up to 90 strokes/minute, 2 Stainless Steel holders
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Chowchilla, CA
Mfr: Grote
Model: 613
Grote 613 Multi-Slicer, with a maximum product size of 6" X 13 (152 X 330 mm). The slicer can produce slice thickness ranging from 0.04" to 0.50 (1-12.7 mm). It accommodates stack heights of up to 2 (51mm). Powered by electrical input of 200-240 VAC, 50/60 Hz, Single phase. Rated for up to 90 strokes per minute. ...more
Grote #FPS-1000, fresh produce slicer, Stainless Steel
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Grote
Model: FPS-1000
Grote FPS-1000 slicer, Fresh Produce Slicer, includes (5) product feed tubes with 2-3/8" x 3-1/2" opening, leading to 30" wide cutting zone, including Accuband blade. Previously slicing bread (Musso Toast) at 0.5 thick. All stainless-steel construction. Driven by 2 HP, 230/460V, 1725 RPM, 3/60 Hz motor thru gearbox. ...more
Grote #HB2, single lane, Stainless Steel, frozen product bisector, cuts frozen bread products horizontally into halves up to 60 pieces per minute per lane
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Grote
Model: HB2
Grote Model HB2 stainless steel, product bisector, cuts frozen or fresh bread products horizontally into halves. (Single lane on frozen, dual lane on fresh.) Product cutting zone is 4.94" in Width x.5 to 3.25" in Height and can cut in temperatures as low as 20°F (-6°C) depending on product and has an ...more
Grote #HB2, single lane, Stainless Steel product bisector, cuts bread products horizontally into halves up to 60 PPM
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Grote
Model: HB2
Grote Model HB2 single lane, stainless steel, product bisector, cuts bread products horizontally into halves up to 60 pieces per minute – depending on materials and application. Product cutting zone is 4.94" in Width x.5 to 3.25" in Height and capable of cutting in temperatures as low as 20°F ...more
Grote #HBS, 2-lane, Stainless Steel, bisector, cuts bread products horizontally into halves, 100 pieces/minute per lane, #R30670
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Grote
Model: HBS
Grote Model HBS (2) lane, stainless steel, bisector, cuts bread products horizontally into halves up to 100 pieces per minute per lane – depending on materials and application. Product cutting zone is 4.94" in Width x.5 to 3.25" in Height and can cut in temperatures as low as 32°F and has an ...more
Grote #S/A-2225, Industrial Slicer, Stainless Steel, 2" x 30", 37" width x 9' 6" L stacking conveyor, 230V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Grote
Model: S/A 2225
Grote model S/A 2225 stainless steel industrial slicer for max product size of 2" x 30". Unit includes 37" wide x 9'6" long stacking conveyor, 230 volt, 3 phase., Basis: FOB.
Grote #SA2522, 2 head Stainless Steel cutter/slider, 120 strokes per minute per head, hydraulicallu driven cutting action
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Grote
Model: SA2522
Two head stainlesss steel, 120 strokes per minute per head. Nominal 5-1/2" stroke and 22"w slicing zone. Most boneless / non-frozen meat, fish, poultry, cheeses, bread products, fruits, and vegetables can be sliced. Has an all S/S motor for driving accuband, cutting band saw, hydraullically driven cutting ...more
Grote, meat slicer, Stainless Steel, 36" slicing area, 5 HP
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Grote
Grote slicer, stainless steel construction, 36" wide slicing area, includes wheels on each side to rotate slicing blade in cutting section (less blade). Wheels are driven by 5 HP motor. Also includes mechanism to adjust angle of feed tube to introduce product to slicing blades. (Less feed tubes)., Basis: FOB.
Hallde #CC-34, Combi Cutter Vegetable Prep Machine, vertical cutter-mixer, 3.5 quart cutter mixer, 4-speed, 500/800 RPM for vegetables, 1500/2800 for cutting/mixing/pureeing
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hallde
Model: CC-34
Combi cutter vegetable prep machine, vertical cutter-mixer, manufactured by Paxton/Hallde, Model CC-34, high speed, 3-1/2 quart cutter-mixer, 4-speed machine, 500/800 RPM for vegetables, 1500/2800 for cutting/mixing/pureeing. Unused., Capacity: 3.50 quarts cutter/mixer, Basis: FOB.
Hallde #RG-300, Table Top Dicer, 7" x 3" feed, 1/4" dices, 75 kW, 1500/1800 RPM, 110 V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hallde
Model: RG-300
Dicer, table top, manufactured by Hallde, Model RG-300. Unit has 7" x 3" feed with pestle, product fed through blades. Last dicing frozen peaches, approx. 1/4" dices. Unit is 110V,.75 kW 50/60 Hz. 1500/1800 RPM. Serial number 300-1168. Good condition., Basis: FOB.
Urschel Lab #RAA, Food Slicer & Processor, 5000 lb./hr., 14" x 15" Opening, 7" Discharge, 1-1/2" Cuts
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Hapman
Model: RAA
Hapman, 400 series screw conveyor and product hopper. 36” long x 36” wide x 30” deep stainless steel product hopper with safety grid, 4" ID x 125" long flexible poly tube and top mounted 9 Hp motor drive has 6” OD product discharge port with 113" ground clearance. Control panel ...more
Heinzen, Slicer/Segment Cutter, 12" Slicing Area, 5-Blade, 16" width x 10' L top belt, 16" x 10' bottom takeaway
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Heinzen
Stainless steel slicer / segment cutter previously used for meats, belt fed unit with (5) circular blades at end, 12" diameter X 12" slicing area, 3" wide spacing between blades. Includes 16" wide X 10' long top belt and 16" x 10' bottom takeaway. Each belt is driven by a Dura-Drive Plus motorized pulley. ...more
Hobart #1612, Meat Slicer, 12" Blade, (2) spare blades, 115V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hobart
Model: 1612
Hobart Model 1612 Meat Slicer with 12" diameter slicing blade. Includes (2) spare slicing blades. Thickness of slices can be manually adjusted by dial/knob. Rated for 115 Volt., Basis: FOB.
Hobart #84141, Bowl Chopper/Food Cutter, Stainless Steel, 14" diameter X 3" deep bowl, (2) 4" L buffalo blades, 1/8 HP, 1725 RPM, 115 V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hobart
Model: 84141
Hobart Model 84141 Buffalo Bowl Chopper / Food Cutter, includes 14" diameter X 3" deep stainless steel bowl with set of (2) 4" long buffalo blades (curved blades). Includes hinged aluminum cover. Driven by 1/8 HP, 1725RPM, single phase, 60 Hz, 5.56 AMPS, 115 Volt motor. Serial number 1358699. Previously used at food ...more
Hobart #84181-D, Bowl Chopper, Stainless Steel, 18" diameter x 3" deep bowl, (2) 5" L buffalo blades, 1 HP, 3450 RPM, 230 V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hobart
Model: 84181-D
Hobart Model 84181-D Buffalo Bowl Chopper, includes 18" diameter X 3" deep stainless steel bowl with set of (2) 5" long buffalo blades (curved blades). Includes hinged aluminum cover. Driven by 1 HP, 3450 RPM, 3/60 Hz, 2.3 AMPS, 230 Volt motor. Serial number 56-022-428. Previously used at food production facility. ...more
Hobart #84181-D, Bowl Chopper, Stainless Steel, 18" diameter x 3" deep bowl, (2) 5" L buffalo blades, 1 HP, 3450 RPM, 115 V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hobart
Model: 84181-D
Hobart Model 84181D Buffalo Bowl Chopper with Meat Grinder attachment. Includes 18" diameter X 3" deep stainless steel bowl with set of (2) 5" long buffalo blades (curved blades). Includes hinged aluminum cover. Driven by 1 HP, 3450 RPM, single phase, 60 Hz, 11.1 amps, 115 Volt motor. Serial number 11-206-282. ...more
Hobart #84185, Bowl Chopper, Stainless Steel, 18" diameter Bowl, 4" H clearance, 2 cutting blades, 1 HP, 3450 RPM, 115 V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hobart
Model: 84185
Hobart bowl chopper, Model 84185, 18" diameter, with 4" high clearance to top cover. s two cutting blades. Stainless steel construction. Single phase, 115 V, 60 Hz, 1 HP motor, 3450 RPM. Serial number 56-025-632., HP: 1, Materials of Construction: Stainless Steel, Previous Use: Dog Food Processing Facility, Basis: ...more
Hobart #HCM300, Vertical Cutter Mixer, Stainless Steel, 30 quart capacity, 17" diameter x 10" deep bowl, 90 deg. Tilt dump discharge, 5 HP, 220 V
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hobart
Model: HCM300
Hobart VCM Vertical Cutter Mixer, model HCM300. Stainless steel construction, 30 quart capacity. Bowl measures 17" diameter x 10" deep. Unit s clear plastic top cover safety guard, S-shaped dual-blade cutting/mixing ceramic knife, 90 degree tilt dump discharge, and 5 minute timer setting. Driven by 5 HP, 220V, 1140 ...more
Hobart #VCM-25, Cutter/Chopper/Mixer, Stainless Steel, Hinged cover with baffle, 2 speed motor
Ingalls Process Equipment | Painesville, OH
Category: Industrial Food Cutters and Slicers
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Hobart
Model: VCM-25
one(1) used Hobart Cutter/Chopper Mixer. Model VCM-25. Serial number 67-6201. stainless steel. Hinged cover with baffle. 2 speed motor. 3 phase, 220 voltage, 60 cycle. On steel stand. We test ran unit in our shop- it ran fine.
Hydrauflake / Gemac #2501, Stainless Steel cutter, slicer chopper/processor, mounted on 4 leg frame
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Hydrauflake / Gemac
Model: 2501
Genmac Model 2501Hydrauflaker, Stainless steel, frozen block breaker. Block sizes up to 24" in Length: 24" in Width; 10" in Height. 30" wide x 69" long product feed table, 22" wide x 6-1/2" high hydraulic ram and eight blade rotary drum assembly. Additionally s safety cover with ...more
JAC Venice, Bread Slicer, 36 Blades, 1/2" Slice, with e-stop, mobile
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jac Venice
JAC Venice bread slicer, with 36 blades, set to cut (35) 1/2" loaves, with e-stop, mobile.
Johnson Industries #9600, Stainless Steel, commercial cheese shredder, used for high-volume shredding and allows you to process up to 40 lb (20 kg) blocks of cheese for size reduction
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Johnson
Model: 9600
Johnson Industries Model 9600, Stainless steel, commercial cheese shredder, used for high-volume shredding and allows you to process up to 40 lb (20 kg) blocks of cheese for size reduction prior to grating at rates up to 10,000 lbs of product per hour – depending on materials, application and operator dexterity. ...more
Johnson Industries #CJ-7200, cheese loaf shredder & blender, 7200 lbs per hour, 4-blade cross cut shredding disc w/cover (3 available)
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Johnson
Model: CJ-7200
Johnson Industries Model CJ-7200, Stainless steel, cheese loaf shredder and blender rated up to 7,200 lbs of product per hour – depending on materials and application. Loave size: 5lb, 6lb, and 10 lb at (4) loaves per cycle; 20 lb loaves at (2) loaves per cycle. side by side 28" long x 4-1/2" wide x ...more
Johnson Industries #CJ-9600, commerical cheese shredder, high volumn cheese shredding, 4-blade cross cut shredding disc
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Johnson
Model: CJ-9600
**Part Of Complete Line R29631A**, Johnson Industries Model CJ-9600, stainless steel, commercial cheese shredder used for high-volume cheese shredding operations and allows you to process up to 40 lb (20kg) blocks of cheese for size reduction prior to grating and is rated up to 10,000 lbs of product per hour – ...more
JWC #4-Shread-1-H-2100, cutter, slicer chopper/processor, with 36" x 36" x 24" product feed hopper, 48" strong shafts & severe duty seals that allow for high impact solids, 25 HP
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Jwc
Model: 4-SHREAD-1-H-2100
JWC, Model 4-SHRED-1-H-2100, shredder. 36" long x 36" wide x 24" Deep product feed hopper 48" long strong shafts and severe-duty seals that allows for high-impact solids loading 25 Hp motor drive shredding items down to size and have been proven in many applications including shredding for ...more
Magnuson #WSP2000, heavy duty, 304 Stainless Steel, roller style peeler and scrubber, mounted on 4 leg base with casters
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Magnuson
Model: WSP2000
Magnuson, model WSP2000 3750001.0107, heavy duty, 304 stainless steel, roller style peeler and scrubber with pounds of product per hour – depending on materials, application and machine configuration. a 12" x 12" charge, (4) 72" long abbrasive rollers powered by a 7½ hp hydraulic pack and a ...more
Nock #Cortex, jerky slicer with circular blades
Revelation Machinery | Chicago, IL
Category: Industrial Food Cutters and Slicers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Nock
Model: CORTEX
Year: 1900
Make: Nock, Model: Cortex Jerky Slicer, Year: 1900, Machine Location: Virginia, Nock Jerky Slicer with Circular Blades, Circular blade cutting machine with special cutting geometry to slice thin slices from high, fresh meat pieces, e.g. for beef jerky, pork jerky, biltong, milanesa, escalopes, roulades, etc..
Paxton #Chef-400-MN, Vegetable Cutting Machine, rotating cutting head, 3" x 6" x 5" deep & 2.5" diameter x 6" deep feed sections
Machinery & Equipment Co | Brisbane, CA
Category: Industrial Food Cutters and Slicers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Paxton
Model: CHEF 400 MN
Vegetable cutting machine, manufactured by Paxton, Model Chef 400 MN, serial number A0209002. Includes rotating cutting head with small perforations and (2) feed sections. One feed section measures 3" x 6" x 5" deep with hinged handle to force product through cutting blade. Other feed section measures 2-1/2" diameter ...more
PCCS / A & B Process #640, heavy duty, Stainless Steel pneu.cheese barrell cutter
Frain Industries | Carol Stream, IL
Category: Industrial Food Cutters and Slicers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pccs
Model: 640
PCCS / A & B Process, heavy duty, stainless steel pneumatic cheese block / barrell cutter. Designed for cutting 640 lb blocks into (16) 40 lb blocks. a 37" high curved face cutting head and harp wire assembly, pneumatic bottom drive arm and pneumatic vertical guillotine wire. Rates dependent on materials ...more
