go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Plastic Granulators and Pelletizer Machines

warning
1 - 50 of 219 listings

5/8" x 9-1/6" Alsteele #1009, Grinder/Granulator, 1/4" perforated screen, 48" H feed tray, 7.5 HP

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Alsteele
Model: 1009
Alsteel grinder/granulator, Model 1009 with 1/4" perforated screen, Serial number 10. Unit has 5/8" x 9-1/6" feed throat, 2-knife open rotor belt driven by 7.50 Hp AC motor (no motor nameplate), 48" feed tray height, bin discharge, on casters., HP: 7.5, Basis: FOB.

.75" Thermo Scientific, Pelletizing Line, 21:1 L/D, 230 V

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Thermo Scientific
Used Thermo Scientific Haake Pelletizing Line, PolyDrive system type 557-6050 extruder, with Pharma extruder 202,.75" diameter screw, 21:1 l/d, jacketed feed second with HMI, serial# 72008002001, melt pump, type 557-6052, on stand, serial# 7200800004001, stand pelletizer, type 554-1347, model PHarma 16 Pelletiser ...more

1" Accupak strand pelletizer

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Accupak
Used 1" wide Accrapak Systems laboratory strand pelletizer. Model 750/1B, serial #5288-9-95. Has a 24 knife solid helical rotor. Driven by a 1 HP motor. Includes 4" air knife. Serial No. 5288-9-95., Location: Midwest USA.

2" x 4" Kayeness, table top granulator, 1 HP, tray feed hopper, serial 9500-1

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Kayeness
Used Kayeness table top granulator. Serial Number 9500-1. Direct connected to a.75kw AS motor, 220 volt, 3400 RPM 60Hz. Has an approximate 2" x 4" throat opening and tray feed hopper., Location: On Site at Perry (Hainesport, NJ - USA).

2" Brabender #Granutizer, strand pelletizer, manually actuated top feed roll, 4-knife rotor

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Brabender
Model: GRANUTIZER
Used 2" Wide Brabender Strand Pelletizer, Manufacturer: Brabender, Model "Granutizer", Serial #: 188SH, Has manually actuated top feed roll, mounted on stand with (2) casters and (2), pads, 4-knife rotor, Includes motor starter and (2) spare blades, 115 volt, 7.5A, 1ph, 60hz, Location: Midwest USA.

Get email updates for newly added Plastic Granulators and Pelletizer Machines

2" Key Internatonal #KG-5, bench top high shear granulator/mixer, 5 liter, #28844

Kempler Industries Inc | Elk Grove Village, IL
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Key
Model: KG-5
USED KEY INTERNATIONAL BENCH TOP HIGH SHEAR GRANULATOR/MIXER, Model KG-5, Total volume: 5 liter, Working capacity: Approximately 2.4 liter, Straight side bowl: 8" diameter x 4-1/2", approx. 5 liters, Bottom 3-blade propeller, Plexiglass clamp down top cover with, 2" tri-clamp opening, Serial no. JI-3569, Stock no. ...more

2" Killion, strand pelletizer w/20 knife carbide tip rotor, 1 HP DC, caster mounted, 230 V.

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Killion
Used 2" Wide Killion Strand Pelletizer with 20 Knife Carbide Tip Rotor, Manufacturer: Killion, Pneumatically actuated top roll feed, Rotor and pull rolls driven by 1 hp DC, motor through a gearbox with Bronco II controller variable speed, Caster mounted, 230 volt AC input, Serial #10000F, Location: Midwest USA.

2" Wayne Pelletizer, 8 knife rotors, 1.5 hp motor with vfd controller, serial# 3356, 2004.

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Wayne
Model: 3356
Used 2" Wayne pelletizer, 8 knife rotors, 1.5 hp motor with vfd controller, serial# 3356, built 2004.

3" x 39" Granutec, pull roll fed granulator, 15 HP, low profile base, blower for discharge

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Granutec
Used Granutec 3" x 39" Pull Roll Fed Granulator, Low profile base, Includes approximately 15 hp rotor motor and motorized pull roll feed, Blower for discharge but no blower included, Click on the link below to see a video of the machine running., Location: On Site at Perry (Hainesport, NJ - USA).

3.5" Kung Hsing pelletizing line

Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Kung Hsing
3.5 inch strand pelletizing line, Kung Hsing Pelletizing Line.

4" Accrapak #900-4-1, strand pelletizer, 1.5 HP, pneumatic roll hold down

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Accrapak
Model: 900-4-1
Product s, Used 4" (100mm) Accrapak Strand Pelletizer, Model 900-4-1, Direct Drive, 24 Knife Helical Rotor, One Rubber Roll, One Steel Roll, Pneumatic Roll Hold Down, Dual Ac Drives For Main Motor and Pull Rolls(1.5hp), 64" Infeed Height- 52" Discharge Height, 480 Volt Plug On Casters, Machine S/N10518/1007, 66"x 66" ...more

4" Accrapak #900-4-3, strand pelletizer, #18713A

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Accrapak
Model: 900-4-3
Product s, Used 4" Accrapak Strand Pelletizer, Model 900-4-3, Direct Drive Motor, (2) Lenze AC Tech Drives, Pneumatic Hold Downs, Buttons: Start/Stop, Hold Down Raise/Lower, Pressure Regulator with Pressure Gauge, Serial Number: 10518/11/07, Dimensions: 5' x 5' x 7'.

4" Conair #304, strand pelletizer

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Conair
Model: 304
Used 4" Wide Conair Model 304 Strand Pelletizer, Serial # 6-010880, 2 HP motor 230 volt, 24-knife helical rotor, Click on the link below to see a video of the machine running., Location: On Site at Perry (Hainesport, NJ - USA).

4" Farrel #CP45, compounding/pelletizing line, includes 4" Farrel continous mixer w/#15 style rotors

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Farrel
Model: CP45
Used Farrel Model CP45 Compounding/Pelletizing Line, 4" Farrel continuous mixer with #15 style rotors, Mixer has jacketed chamber, Mixer discharges into a 5" 10/1 L/D extruder with Gala #6 underwater pelletizer driven by 10 hp 230/460 volt motor, 40 gpm water tempering system, and 16.2 ECL Gala spin dryer., Previously ...more

4" Scheer #SGS-50-EL, strand pelletizer, sound enclosed chamber, serial #10040017,2013

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Scheer
Model: SGS-50-EL
Year: 2013
Used 2" wide Scheer strand Pelletizer. Model Type SGS-50-EL, serial #10050017, new 2013. Has nominal 2" wide entrance. Has 20 knife carbide inlay helical style rotor driven by an AC motor with variable speed controller. Mounted on caster base. 460 volt. Extremely clean., Location: Midwest USA.

4" Scheer Bay #SGS-100E, pelletizer, 36 knife helical carbide tipped rotor

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Scheer Bay
Model: SGS-100E
Ised 4" Scheer Bay pelletizer, Mfr: Scheer Bay, Model: SGS-100E, Has 36 knife helical carbide tipped rotor, 460 volt AC input, Serial: SE100C-99676, Click on the link below to see a video of the machine running., Location: On Site at Perry (Hainesport, NJ - USA).

4" Scheer Bay #SGS100-E, pelletizer, 32 knife helical style rotor, mounted on caster base

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Scheer Bay
Model: SGS100-E
Used 4" wide Scheer Bay Pelletizer. Model SGS100-E, serial # SE10CC-9801. Has 32 knife helical style rotor with carbide inlay driven by an AC Tech variable speed controller. 460 volt AC input, 3 phase, 60 hertz, 14.2 amps. Mounted on caster base., Location: Midwest USA.

4" Scheer Bay pelletizer

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Scheer Bay
Used 4" Scheer Bay Pelletizer, Model SGS-100E, Serial # SE100505, 36-knife helical rotor, 460 volt, Click on the link below to see a video of the machine running., Location: On Site at Perry (Hainesport, NJ - USA).

4" SRS Corp. #SR1013, FBE bi-cutter screenless granulator, 1 HP, beside the press design, 2006

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Srs Corp.
Model: SR1013
Year: 2006
s: Hopper Magnet, Low Speed, Beside-the-Press Design, Power: 230V, Horsepower: 1 HP.

4" 20 Knife Model 304 Helical Strand Pelletizer

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Model: 304
Used 4" Conair Model 304 20-Knife Strand Pelletizer, Manufacturer: Conair, Model: 304, Serial: 6-042190, Has 20-knife helical style rotor, Driven by 2 hp AC motor with control, 230 volt AC input, Location: NJ.

4.5" Accrapak #900-4, strand pelletizer, 2.4 HP, direct drive

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Accrapak
Model: MODEL 900-4-1
Product s, Used 4.5"Accrapak Strand Pelletizer, Model 900-4, Helical Rotor, 24 Cutters, 2.4 HP Direct Drive Motor, 1410-1690 RPM, 5" Rubber Pull Roll, Steel Pull Roll, Pneumatic Roll Hold Down, Dual AC Drives (Lenze & Automation Direct Dura Pulse GS20) For Main Motor and Pull Rolls, 64" Infeed Height- 52" ...more

4.5" Davis Standard/Gala #45IN45HT, Underwater Pelletizing Line, 365 HP capacity, 1.5 S.F., 17.48 ratio, 150 HP motor

HGR Industrial Surplus | Euclid, OH
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: Davis
Model: 45IN45HT
INTERESTED PLEASE CONTACT ANDREW PRINGLE 216-630-5692, APRINGLE@HGRINC.COM.

4.5" Davis-Standard/Gala, Underwater Pelletizing Line, 30:1 L/D, 17.4:1 ratio, 60 GPM, 365/150 HP, 1997

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Davis-Standard
Year: 1997
Used 4.5" Davis Standard / Gala underwater pelletizing line with 4.5" Davis Standard Thermatic extruder, model 45IN45HT, 30:1 L/D, air cooled barrel, jacketed feed section, vented barrel, gearbox rated 365 hp, 17.4:1 gearbox ratio, 1.5 service factor, extruder driven by 150 hp dc motor, over barrel control ...more

4.5" PTI #TS45000, pelletizing line, 30:1 L/D, electrically heated, water cooled, 1999

Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Pti
Model: TS45000
Year: 1999
1999 PTI pelletizing line with model TS4500 4.5 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42 center-line height. The gearbox is a Flender model SZNE250 having a reduction ratio of 13.88:1 and has a service rating of 200 HP and a catalogue rating of ...more

4.5" Pelletizing line, Stainless Steel water trough, Cumberland pelletizer, Witte 2 deck classifier

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 4.5" pelletizing line consisting of the following:, – 4.5" Prodex 34/1 L/D vented extruder including strand die, Lufkin "Change Gear" gearbox with 15.03/1 reduction, and an hydraulic screen changer with pump., Extruder is driven by 300 hp AC motor, includes heater control panel, motordrive consisting of ...more

5" x 11" Cumberland #1-1/2, granulator, used

Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
Model: 1-1/2
Model 1 1/2, 5" x 11" Feed Opening, Rotor: 5 Knife Solid Radial, Bed Knives: D2, Base: Leg, Discharge: Gaylord Gravity, Motor: 15 HP 460 Volt.

6" x 11" Conair #6X11, granulator, top feed, 1998

Glacier Machinery Sales Corp | St. Paul, MN
Seller: Glacier Machinery Sales Corp
Location: St. Paul, MN
Mfr: Conair
Model: 6X11
Year: 1998
CONAIR GRANULATOR, 6" x 11" TOP FEED, (1998), ADDITIONAL PICTURES UPON REQUEST, PRICED TO SELL.

6" x 13-3/4" Rapid #G15035, granuator, 3 HP, 2 fixed knives, 3 rows rotating knives, 5 staggered, 2008

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Rapid
Model: G15035
Year: 2006
Motor: 3 hp. | Voltage: 230V | Cutting Chamber: 13 3/4" x 6" | Fixed Knives: 2 | Rotating Knives: 3 rows / 5 Staggered.

6" x 18" Alsteele #7X18, Plastic Scrap Grinder, 7" dia. x 18" W chamber, 6" W x 18" feed chute, 30 HP, 1170 RPM, 220/440 V

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Alsteele
Model: 7X18
Alsteele plastic scrap grinder model 7X18. Unit driven by 30 HP direct drive, 1170 RPM, 220/440V drive motor. Chamber is 7" diameter x 18" wide with screen discharge, 6" wide x 18" feed chute. Complete mill is jacketed for water cooling. Unit complete, mounted on heavy duty base, in excellent condition Serial number ...more

6" Cumberland #Quietizier, 36 knife helical rotor, sound deadening hood, 10 HP, VFD drive

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cumberland
Model: QUIETIZIER
Used 6" Wide Cumberland "Quietizer" Pelletizer, Manufacturer: Cumberland, 6" wide chamber, 36-knife helical rotor, Additional information: Cutting chamber is mounted in sound deadening hood, has air cylinder actuated nip rolls, approximately 10 hp AC motor with VFD drive and operator push button station. Strand input ...more

6" Cumberland strand pelletizer, 3 HP, 12 knife bolt on style rotor, spring loaded rolls

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cumberland
Used 6" Cumberland strand pelletizer 12 knife bolt-on style rotor. Driven by 3 hp 230/460 volt US Varidrive. Has spring loaded pull rolls. Serial #26111-6947., Location: On Site at Perry (Hainesport, NJ - USA).

6" Cumberland strand pelletizer, 16 knife rotor, 5 HP VSD, serial 26111-65R, 1956

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cumberland
Year: 1956
Used 6" Cumberland strand pelletizer with 16 knife rotor. Driven by approximately a 5HP USVD. New 1956. Serial #26111-65R., Location: On Site at Perry (Hainesport, NJ - USA).

6" Cumberland strand pelletizer, 8 knife bolt on style rotor, 7.5 HP US varidrive

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cumberland
Used 6" Cumberland strand pelletizer driven by 7.5 hp US Varidrive. Has 8 knife bolt-on style rotor (6 knives installed), 230/460 volt, AC input. Serial #226110-732. No feed tray included., Location: On Site at Perry (Hainesport, NJ - USA).

6" Davis-Standard/Berringer, Water Ring Pelletizing Line, 44:1 L/D, 11.478:1 ratio, 600 GPM, 7.5/400 HP

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Davis-Standard
Used 6" Davis standard Egan / Berringer water ring pelletizing line consisting of: 6" Davis Standard Egan extruder, model 6026-D.R.H, 44:1 l/d, electrically heated, water cooled barrel, jacketed feed section, vented barrel with vacuum pump, 11.478:1 gearbox ratio, with 400 hp dc motor, cored screw, control ...more

Van Dorn #G-200, Plastic Grinder/Granulator, 6.5" x 6.5" chamber w/14" x 6" feed throat, (3) rotating & (2) stationary blades, 2 HP, 1140 RPM, 230/460 V

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Van Dorn
Model: G-200
Van Dorn Model G-200 plastic grinder / granulator, mild steel construction. Chamber measures 6-1/2" X 6-1/2" with 14" x 6" feed throat. Includes (3) rotating blades and (2) stationary blades with 7/16" (0.437") screen and 9" center bottom discharge. Driven by 2 HP, 230/460 volts, 3-phase, 60 Hz, 1140 RPM motor. ...more

6.5" x 12" Cumberland #FX712, Beside the Press granulator, 5 HP, 2 bed knives, 3 rotating knives, 2022

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Cumberland
Model: FX712
Year: 2022
Cutting Chamber: 6.5 in x 12 in | HP: 5 HP | Bed Knives: 2 | Rotating Knives: 3 | Rotor: Open | Rotor Knife Angle: 55 Degree | Type: Single Fly-Wheel | Discharge: 1.5 in | Voltage: 460/3/60, Horsepower: 5.

6.5" x 16" Cumberland #6516, granulator, 5 HP, 1750 RPM

Nationwide Machinery Sales | Troy, MI
Seller: Nationwide Machinery Sales
Location: TROY, MI
Mfr: Cumberland
Model: 6516
Year: 2012
- Opening: 6.5" x 16", - Motor: 5 HP, 1750 RPM, - 230/3/60, - Top Feed.

7" x 55" Conair Wortex #UP-755, Under the Press Granulator, 10 HP, Paddle Roll Feed, 1993

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: UP-755
Year: 1993
Product s, 7" x 55" Wortex Under the Press Granulator, Model UP755, 10 HP, Paddle Roll Feed, 3/8" Screen Hole Size, With 3 HP Blower, Pull Rolls Driven By 1 HP Motor, S/N 06939, Machine Built In 1993, Approximate Dimensions And Weight:, 92" L x 50" W x 34" H(25" With Feed Hopper Removed), 4,000 LBS.

7" x 55" Wortex #UP-755, Under the Press Granulator, 10 HP, Paddle Roll Feed, 1988

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Wortex
Model: UP-755
Year: 1988
Product s, 7" x 55" Wortex Under the Press Granulator, Model UP755, 10 HP, Paddle Roll Feed, 3/8" Screen Hole Size, With 5 HP Blower, S/N 3376, Machine Built In 1988., Approximate Dimensions And Weight:, 96" L x 50" W x 34" H(25" With Feed Hopper Removed), 4,000 LBS.

7" Conair #3508, Pelletizer, 15 HP, 230 V, S/N 12-080583

HGR Industrial Surplus | Euclid, OH
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: Conair
Model: 3508
7" OPENING.

7.5" x 10" Conair Wortex #JC-5, granulator, 5 HP, Hog style rotor, on casters, #8388

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: JC-5
Product s, Used 7.5" x 10" Conair Wortex Granulator, Model JC-5, 5 HP, Hog Style Rotor, On Casters, 1/4' Screen Missing Starter Cover and Bin. Serial Number 2087.

8" x 5" Hosokawa #20/12RO SIL Tandem, Polymer Systems Rotoplex granulator, twin mounted 20/12 RO units, 5 hp, 460 volt each

Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Hosokawa
Model: 20/12RO
Used Hosokawa Polymer Systems Rotoplex granulator, model 20/12RO SIL Tandem, twin mounted 20/12 RO units, 5 hp, 460 volt each, approximately 200 mm(8") x 120 mm (5) feed opening, with feed hopper and discharge blower, serial# 20/12 RO SIL 6042 02.

8" x 8" Cumberland #Size-7X10, Plastic Scrap Grinder, Carbon Steel

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cumberland
Model: SIZE 7 X 10
Plastic scrap grinder, manufactured by Cumberland, Size 7 X 10, carbon steel construction, with 8" x 8" opening, leading to grinding chamber. Serial# 39000-6055. Appears to be in good condition., Basis: FOB.

8" x 10" AEC / Nelmor Marathon Series #MV810, 7.5 HP, 3/16th screen hole, 220 V.

Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Aec
Model: MV810
Marathon Series, Open Rotor; 3 Blades, 2 Beds, HP: 7.5, Voltage: 220.

8" x 10" Ball & Jewell #MVP810, granulator, 5 HP, 1165 RPM

Nationwide Machinery Sales | Troy, MI
Seller: Nationwide Machinery Sales
Location: TROY, MI
Mfr: Ball & Jewell
Model: MVP810
Year: 2000
- Opening: 8" x 10", - Motor: 5 HP, 1165 RPM, - 230-460/3/60, - Homemade plexi-glass chute for robot feed.

8" x 10" Cumberland granulator, 20 HP, closed rotor, 3 fly, 2 bed knives, used

Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Cumberland
20 HP, 8" x 10" Feed Opening, Closed Rotor, 3 Fly & 2 Bed Knives.

8" x 10" Nelmor #8x10, granulator, 2 blade open rotor, sound proof

Glacier Machinery Sales Corp | St. Paul, MN
Seller: Glacier Machinery Sales Corp
Location: St. Paul, MN
Mfr: Nelmor
Model: 8X10
NELMOR GRANULATO, 8" x 10", 2 BLADE OPEN ROTOR, SOUND PROOF, ADDITIONAL PICTURES UPON REQUEST, PRICED TO SELL.

8" x 10" Nelmor #G810M1, Granulator, 5 HP, 1745 RPM, S/N 808 11990

HGR Industrial Surplus | Euclid, OH
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: Nelmor
Model: G810M1
8" X 10" OPENING, 1745 RPM.

8" x 10" Nelmor #G810M1, Granulator, 5 HP, 1745 RPM, S/N 7405 7532

HGR Industrial Surplus | Euclid, OH
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: Nelmor
Model: G810M1
8" X 10" OPENING.

8" x 30" Cumberland #30T, pull roll granulator, 7.5 HP AC motor, 5/16" screen

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: 30T
Product s, Used 8" x 30" Cumberland 30T Pull Roll Granulator, 7.5 HP AC Motor, 5/16" Screen, 6" Air-Veyor Discharge, On Casters, Approximate Dimensions: 76" L x 42" W x 50" H.