1 - 50 of 537 listings
.38" wide x 8.2' long, Stainless Steel Belt Conveyor, 1/2 HP, 1600 RPM, 230 V.
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
(2) Stainless steel belt conveyor measuring 0.375" wide x 8'3" long incline. Unit last used for syringes, driven by 1/2 hp gearhead drive, 230 volt, 1600 RPM. On stainless steel frame., HP: 0.5, Type: Syringe Conveyor, Measurements: 0.375" Wide X 8'3" Long, Materials of Construction: Stainless Steel, Previous ...more
.44" wide x 16' long, Dabrico Inc. #CNV-020, Exit Conveyor, Stainless Steel, syringe inspection system, 0.44" inlet/outlet, 115 V., 2004
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Dabrico
Year: 2004
Dabrico Inc syringe inspection system, exit conveyor. Set up as gripper belt, size 0.4375" wide x 16' long. Unit is Model CNV-020, manufactured in 2004, stainless steel frame and aluminum with (4) 0.4375" inlet & outlet and 0.4375" opening on turn dial/stars, 115 Volt, Serial number 200411-7 complete with ...more
1" wide x 2.8' long, Globaltek Conveyors, Stainless Steel, bottomless, side belt transport conveyor, rubber gripper belts
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Globaltek
Globaltek Stainless steel, Bottomless, side belt transport conveyor with number of product per minute – depending on material and application. single 32" long x 1" wide rubber side product gripper belts with independant drives each side, variable speed control and hand crank adjustabe to handle ...more
1" wide x 9.5' long, IMA, Mesh Belt Conveyor, Stainless Steel, 1600 RPM, 3 Ph., 60 Hz, 2006
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ima
Year: 2006
Belt conveyor, manufactured by IMA, stainless steel mesh belt conveyor, measures 1" wide x 9'6" long, pharmaceutical grade, driven by fractional HP, 1600 RPM, 3/60Hz motor, with start/stop controls. New in 2006, serial number LA0103. Mounted on two (2) legs with three-prong feet. Previously conveying vials to ...more
1-1/4" wide x 2.8' long, Douglas Smart Feeder, dual lane, servo driven feeder, dual top & bottom Eagle belt infeed conveyors
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Douglas
Dual lane, servo driven feeder, speeds – depending on materials and application. dual 32" long x 1-1/4" wide top and bottom eagle belt product in feed conveyors to 72" long x 32" wide canvas belt product conveyor with 48" long x 1-/4"wide sliding smartrak steady stream product feed ...more
Get email updates for newly added Belt Conveyors
Belt conveyors (also known as belt transport systems) are versatile machines that use a continuous belt to move materials along a production line or between locations. Ideal for industries like manufacturing, mining, and logistics, they provide efficient material handling for items ranging from bulk goods to packaged products.
1.75" wide x 9.1' long, Hoppmann, Air Conveyor, 1/3 HP, 41-1/2" infeed H, 45" discharge H
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Hoppmann
Hoppmann Air Conveyor. S/N: 389710. Maximum aperture/clearance: 1-3/4 in. W x 1-1/2 in. H (usable). Travel length: 118 in. L. Adjustable guiderails. Conveyor infeed height: 41-1/2 in. H. (adjustable). Conveyor discharge height: 45 in. H (adjustable). Dayton Motor, 1/3 hp, 3450 rpm, 115/230 V, 5.4/2.7 amps, 60 Hz ...more
2" wide x 6' long, Inclined Cleated Belt Conveyor, Stainless Steel, 60" H discharge, 3" x 3" discharge opening, 1/2 HP, 1700 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Incline cleated belt conveyor measuring 2" wide x 6' long with 60" discharge height, 3" x 3" discharge opening. Unit is mounted on stainless steel base, complete with top side mounted 1/2 hp, 230/460 volt, 1700 rpm drive. Last used on golf balls., HP: 0.5, Type: Incline Cleated Belt Conveyor, Measurements: 2" Wide ...more
2.75" wide x 4' long, TL Systems, Stainless Steel Belt Conveyor, 115 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tl Systems
TL Systems stainless steel belt conveyor, belt measures 2.75" wide x 4' long. Unit has stainless steel frame and belt. Complete with 115V variable speed drive, on/off controls. Excellent condition., Measurements: 2.75"Wide X 4' Long, Materials of Construction: Stainless Steel, Previous Use: Pharmaceutical ...more
2.75" wide x 7' long, TL Systems, Stainless Steel Belt Conveyor, 12" diameter Accumulation table, 115 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tl Systems
TL Systems stainless steel belt conveyor, belt measures 2.75" wide x 7' long. Unit has stainless steel frame and belt. Complete with 115V variable speed drive, on/off controls and emergency shut off. Includes 12" diameter accumulation table. Excellent condition., Type: Accumulation Conveyor, Measurements: 2.75" ...more
3" wide x 3.2' long, Arrowhead Conveyor #066180-98, E-27358, Bottle Conveyor, 1.5 HP, 38" infeed/exit H
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Arrowhead Conveyor
Arrowhead Stainless Steel Table Top Transfer Conveyor. Model: 066180-98, E-27358. Maximum product width: 3 in. Effective conveyor length: 38 in. L. Reliance Electric Motor, 1.5 hp, 1725 rpm, 208-230/460 V, 4.4-4.74/2.2 amps, 60 Hz, 3 phase. Dodge Tigear, Model: MR94668L1, 15 ratio, 115 rpm (final), 1030 in-lbs torque. ...more
3" wide x 9' long, Belt Conveyor, 30 deg turn, 0.75 HP, 115 RPM, 230/460 V, on stand w/(8 available) legs
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Belt conveyor 3" wide x 9' long with 30-degree turn. Unit is stainless steel frame, 0.75 Hp, 230/460 volt, 115 RPM and manual speed control. Unit is on stand with (8) legs, no nameplate data available., HP: 0.75, Type: 30 Degree Turn, Measurements: 3" Wide X 9' Long, Materials of Construction: Stainless Steel ...more
3" wide x 10.7' long, PDC #75C-ER, conveyor, 1.5 HP
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Pdc
PDC, Model 75C-ER, S/N 110, 240 volts Single Phase, 1- hp, Conveyor 127 in. L x 3 in. W, 85 in. H x 50 in. W x 127 in. L.
3.25" wide x 4.2' long, Pacific Conveyor, Belt Conveyor, Stainless Steel, 90 deg turn, 1/4 HP, 115 VDC, portable
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Pacific
Pacific belt conveyor, stainless steel. Unit measures 3.25" wide x 4'4' long to 90-degree turn. Unit is 115 Volt DC speed control, 1/4 HP, portable., HP: 0.25, Type: 90 Degree Turn, Measurements: 3.25" Wide X 4'4" Long, Materials of Construction: Stainless Steel, Previous Use: Pharmaceutical Packaging ...more
3.25" wide, Intralox #S4009-F/T, Blue Tabletop Conveyor Belting, 3.25" width belt
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Intralox
Intralox Tabletop Conveyor Belting. Width: 3.25 inches. Model: S4009 F/T. Color: blue. Total linear feet available: 350 ft. Can be sold in 10 ft sections. (ACN3a/10).
3.5" wide x 7' long, Trans Automatic Technologies conveyor, Stainless Steel frame, 2021
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Trans Automatic Tech
Year: 2021
Used Trans Automation Technologies Dual Lane Conveyor, includes (2) 3.5" wide x 7' long conveyor frames (less belting), unitized on stainless steel frame standing at 30". Unitized on stand and adjustable legs. Less drive. Serial number 1871-8, Measurements: 3.5" wide X 7" long (x2), Materials of Construction: ...more
4" wide x 7' long, Dorner #26TM04, electric conveyor, 2014
Holland Equipment Hunters Inc | Hamilton, MI
Category: Belt Conveyors
Seller: Holland Equipment Hunters Inc
Location: Hamilton, MI
Mfr: Dorner
Year: 2014
Type:Miscellaneous Items, ConveyorsManufacturer:DORNERModel:26TM04Condition:ExcellentYear:2014Stock #:802646Status:For SaleSerial #:608854-1-1-1.
4" wide x 8.5' long, Sure Servo #SVL-207, Belt Conveyor, 10" cleated plastic belt, 2" H x 4" width cleats w/16" apart, 1 HP, 200 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Sure Servo
Belt conveyor with 10" cleated plastic belt. Plastic belt s rubber grip material to hold trays or products in place. Cleats are 16" apart, cleats measure 2" high x 4" wide. 102" long belt s plastic side rails as well as infeed and discharge steel grates. Driven by 1 HP Servo motor, 200 V, 5 AMPS, manufactured by Sure ...more
4" wide x 9' long, Dorner #26TM04, electric conveyor, 2014
Holland Equipment Hunters Inc | Hamilton, MI
Category: Belt Conveyors
Seller: Holland Equipment Hunters Inc
Location: Hamilton, MI
Mfr: Dorner
Year: 2014
Type:Miscellaneous Items, ConveyorsManufacturer:DORNERModel:26TM04Condition:ExcellentYear:2014Stock #:802645Status:For SaleSerial #:622401-1-1-1.
4" wide x 14' long, Ampak Engineering, Stainless Steel Belt Conveyor, 35" belt height, 110 V input, 90 V motor
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ampak Engineering
Stainless Steel Belt Conveyor measuring 4" wide x 14' long, conveyor is mounted on two stainless steel frames with casters. Belt is set at 35" belt height. Includes side rails along most of the straight run, previously used with cup filling. The conveyor operates on a 110V input and utilizes a 90V motor. a ...more
4" wide x 126" long, Watson Masters #Custom, Cleated Belt Conveyor, 320°F, 12" diameter Stainless Steel Enclosure
Federal Equipment Company | Cleveland, OH
Category: Belt Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Watson Masters
Used Watson Metal Masters custom built stainless steel cleated belt conveyor, 4" wide X 126" long, with 12" diameter stainless steel shell enclosure, rated atmospheric pressure from 100 F to -320 F (cryogenic), with end caps and stand, serial# 4752-2, built 2014.
4" wide, Carton Transfer Conveyor
Federal Equipment Company | Cleveland, OH
Category: Belt Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Carton
Used 4" Carton transfer conveyor, with motor and controls.
4" wide, Stainless Steel Elevator Conveyor, 0.75 HP, 36" infeed, 57" discharge, 35" x 24" x 19" D Hopper
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Genemco
4 wide Elevator Conveyor. Infeed at 36. Discharge at 57. Adjustable 6 foot pads. Hopper is 35 x 24 x 19D. Vander Graaf Inc Motor Model No.TM127A25-675NB-STM, Serial No: NS78795A-8 Class: F, Mp: 1.14, Hz: 60, Ph: 3, HP: 0.75, Volts: 480.
4" wide, Minnesota, Squeezer Conveyors, 2 HP, 4" width knuckle type belt
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Minnesota
Minnesota Automation Squeezer Conveyor. Model Leak Detectors, 4 in. W knuckle type belt, baldor motor 1 to 2 hp, 30 rpm-final, 220-440 V, 80 psi. Overall dimensions 12 ft. L x 3 ft. W x 8 ft. H.
4" wide, Nedco Conveyor Technology, 90 Degree Carton Transfer Conveyor
Federal Equipment Company | Cleveland, OH
Category: Belt Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Nedco
Used 4" Nedco Conveyor Technology, with 90 degree bend, serial# 99-183-P3.
4.5" wide x 3.4' long, KOFAB portable inclined belt conveyor, Stainless Steel frame, 40" feed height, 80" discharge height, 2007, #50138, 2007
Federal Equipment Company | Cleveland, OH
Category: Belt Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Kofab
Year: 2007
Used KOFAB inclined belt conveyor, stainless steel frame, approximately 4.5" wide x 40" long belt, 40" feed height, 80" discharge height, equip# AL07-2-02, built 2007.
4-1/2" wide x 4.8' long, BMI / Benda table top conveyor, vari-speed controller
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Bmi
BMI stainless steel frame belt conveyor. variable speed controler, 4½" wide x 56" long stainless steel table top product conveyor belt, adjustable guide rails and has 31" to 37" in feed and discharge height range. Mounted on (4) leg stainless steel leg frame with leveling pads., OAD: ...more
4.5" wide x 8' long, Ingersoll-Rand belt conveyor, Stainless Steel, torquer
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ingersoll-Rand
Kaps-All hand held capper mounted above stainless steel belt conveyor. Capper is an Easy-Kap hand cap torquer. Belt conveyor measures 4.5" wide X 95" long, set at 37" high. Previously used at a cosmetics manufacturing facility., Type: Easy Kap Hand cap Torquer, Measurements: 4.5" Wide X 95" Long, Materials of ...more
4-1/2" wide x 10' long, BMI / Benda table top conveyor, mounted on 4 leg Stainless Steel leg frame with leveling pads
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Bmi
BMI stainless steel frame belt conveyor. 4½" wide x 120" long Delrin table top product conveyor belt, adjustable guide rails and has 31" to 37" in feed and discharge height range. Mounted on (4) leg stainless steel leg frame with leveling pads., OAD: 120"L x 24"W x 38"H.
4.5" wide x 12' long, Symplex, Stainless Steel belt conveyor, portable, vari-speed
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Symplex
Stainless Steel Belt Conveyor with variable speed, measures 4.5" wide X 16' long. Conveyor includes variable speed controls. Previously used at a cosmetics manufacturing facility., Type: Variable Speed, Measurements: 4 1/2" Wide X 12' Long, Materials of Construction: Stainless Steel, Previous Use: Cosmetics ...more
4.5" wide x 14' long, Belt Conveyor, Stainless Steel frame & plastic belt
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Belt conveyor with stainless steel frame and plastic belt, belt measures 4-1/2" wide x 14' long, complete with side mounted drive and VFD for speed control. Portable frame with casters. Previously used at ice cream processing facility., Type: Horizontal Belt Conveyor, Measurements: 4.5" Wide X 14' Long ...more
4.5" wide x 16' long, Stainless Steel belt conveyor, portable, vari-speed
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless Steel Belt Conveyor with variable speed, measures 4.5" wide X 16' long. Conveyor includes variable speed controls. Previously used at a cosmetics manufacturing facility., Type: Variable Speed, Measurements: 4 1/2" Wide X 16' Long, Materials of Construction: Stainless Steel, Previous Use: Cosmetics ...more
4.5" wide x 23.8' long, Bottle Conveyor, 1/2 HP
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Bottle Conveyor. Belt: 284 in. L x 4- in. W. Motor Specialty, Model: S604A, 90 V DC, 1,750 rpm, hp, 6.5A, enclosure: TEFC, Frame: 56C. Overall dimensions: 122 in. L x 23- in. W x 43 in. H.
4.5" wide x 80' long, Plastic Conveyor Belt, (8) belt sections
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Not Specified
Plastic Conveyor Belt 4.5 inch wide. (8) belt sections. Overall dimensions: 10 ft. L X 4 1/2 in. W x 1-1/4 in. H. Total length available : 80 ft.
4-1/2" wide, AMBEC 20 Plus, Stainless Steel Conveyor Extension, 2-1/2" Belt spacing, (4) 1/2" bolt holes
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Ambec
AMBEC Stainless Steel Conveyor Extension. Last used by Turtle Wax Company. 4-1/2 in. Conveyor belt width 2-1/2 in. spacing between each side under belt. (4) ½ in. bolt holes on each end of conveyor for easy add-on to another unit. Overall Dimensions: 121 in. L x 5 in. W x 6-1/2 in. H.
JUST ADDED!
5" wide x 3.9' long, Dorner #2100-Series, belt conveyor
Federal Equipment Company | Cleveland, OH
Category: Belt Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Dorner
Used 47" Dorner belt conveyor, series 2100, approximately 5" wide x 47" long belt.
5" wide x 20' long, Rubber Belt Conveyor, 5' 6" H discharge
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
5"Wide x 20 Feet long, 5' 6"ft discharge height, Cleated belt.
5" wide, SECO, Conveyor
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Seco
SECO Simplimatic Engineering Company Conveyor. Maximum size of belt handled: 5 in. W. Overall dimensions: 24 in. L x 13-1/2 in. W x 14-1/2 in. H.
5.5" wide x 7.75' long, rubber belt, raised cleats on 4" centers, full support, aluminum construction
Icon Industries, Inc | Grand Rapids, MI
Category: Belt Conveyors
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
5.5 " WIDE X 93" LONG RUBBER BELT WITH RAISED CLEATS ON 4" CENTERS. FULL SUPPORT UNDER BELT. FLAT PART OF 5.5BELT IS APPROX 62" LONG WITH INCLINED SECTION APPROX 26" LONG. ALL ALUMINUM CONSTRUCTION. SMALL D.C. DRIVE MOTOR. REMOVABLE LEXAN DIVIDER ON TOP OF FLAT BELT. OVERALL DIMENSIONS: 96" X ...more
5.5" wide, SECO, Conveyor, 0.5 HP, (2) 6" diameter Sprockets w/ 3/4" tooth pitch, 48" infeed/exit H
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Seco
SECO Simplimatic Engineering Company Conveyor. Product clearance: 5-1/2 in. W x 13 in. H. Includes (2) 6 in. dia. sprockets with a 3/4 in. tooth pitch. Baldor Motor, 1/2 hp, 1725 rpm, 208-230/460 V, 1.8-1.6/.8 amps, 60 Hz, 3 phase. Flexaline Grove Gear, Ratio: 40, 43.125 rpm (final). Conveyor infeed/exit height: 48 ...more
5.5" wide, SECO, Conveyor
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Seco
SECO Simplimatic Engineering Company Conveyor. Maximum product width: 5-1/2 in. W with adjustable guards. Overall dimensions: 72-1/2 in. L x 14 in. W x 14-1/2 in. H.
5.75" wide, Hytrol #COMPCNX, Continuous Loop Conveyor, 230 V., 2020
Revelation Machinery | Chicago, IL
Category: Belt Conveyors
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Hytrol
Year: 2020
Make: Hytrol, Model: COMPCNX, Year: 2020, Machine Location: Indiana, Hytrol COMPCNX Conveyor, Connex Double (Continuous) Loop with 5.75″ Wide Conveyor, 2020:, – 6 Foot x 8 Foot footprint, – 1/2 HP drive motors, 230V/3ph/60hz, – ALT1000 connect double loop, Conveyor consists of:, (1) S140 ...more
6" wide x 5' long, Stainless Steel belt conveyor, belt drive
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel belt conveyor, measures 6" wide X 60" long, Conveyor is mounted on 37" high frame with legs and includes belt drive. Previously used at a cosmetics manufacturing facility., Measurements: 6" Wide X 60" Long, Materials of Construction: Stainless Steel, Previous Use: Cosmetics, Basis: FOB, Belt Height: 37".
6" wide x 6.67' long, Intralock, 1/35 HP, 90 VDC, 115 VAC, qty. 2
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Intralock
(2) Intralock belt conveyor measuring 6" wide x 6'8" long with plastic intralox type belting. Unit is driven by 1/35 Hp, 90v dc, 115V input AC drive, mounted on aluminum frame with casters. One unit is complete; one needs belting., HP: DC Drive, Measurements: 6" Wide x 6'8" Long, Basis: Each, FOB.
6" wide x 7' long, Arrowhead, Stainless Steel Belt Conveyor, 1 HP, 230/460
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Arrowhead
Stainless steel belt conveyor frame, set up for 6" wide belt, 7' long stainless steel frame. Manufactured by Arrowhead Conveyor. Includes motor, 1 HP, 230/460V motor thru V-belt drive. Does not include one end with gears for belting. Less belting. Good condition., HP: 1, Type: Horizontal Belt Conveyor ...more
6" wide x 7.8' long, Platinum Packaging Group #A71721, servo driven Stainless Steel inclined cleated conveyor, food grade belt
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Platinum Packaging
Platinum Packaging Group, Model A71721, servo driven stainless steel inclined cleated conveyor. a 6" wide x 92" long food grade belt with 2" high cleats set on 6" centers. 48" long horizontal run has a 36" charge height. 44" long incline section has a discharge height of 60". ...more
6" wide x 9' long, Arrowhead, Stainless Steel Belt Conveyor Frame, 1 HP, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Arrowhead
Stainless steel belt conveyor frame, set up for 6" wide belt, 9' long stainless steel frame. Manufactured by Arrowhead Conveyor. Includes motor, 1 HP, 230/460V motor thru V-belt drive. Does not include one end with gears for belting. Less belting. Good condition., HP: 1, Measurements: 6" Wide X 9' Long ...more
6" wide x 9.1' long, Stainless Steel belt conveyor, 37"-41" infeed/discharge height
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stainless
Stainless steel belt conveyor. a 6" wide x 118" long belt with a 37" to 41" infeed / discharge height., OAD: 120"L x 21"W x 39"H.
6" wide x 10' long, Stainless Steel Belt Conveyor, 1 HP, 1725 RPM, 208-230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel belt conveyor, measures 6" wide x 10' long, includes stainless steel belt and stainless steel frame with legs. Belt is driven by 1 HP, 208-230/460V, 1725 RPM, 6/60 Hz motor thru gear reducer and chain & sprocket assembly. Includes emergency stop switch. Previously used to convey cans at food ...more
6" wide x 12' long, Globaltek, Stainless Steel belt conveyor, vari-speed drive
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Los Angeles, CA
Mfr: Globaltek
Globaltek Stainless Steel Belt Conveyor with variable speed, measures 7.50" wide X 10' long. Conveyor includes variable speed controls, rated for 110 Volt. Previously used at a cosmetics manufacturing facility., Type: Belt Drive, Measurements: 6" Wide X 142" Long, Materials of Construction: Stainless Steel ...more
JUST ADDED!
6" wide x 13' long, Belt Conveyor, 0.5 HP, 1750 RPM
Aaron Equipment Co | Wood Dale, IL
Category: Belt Conveyors
Seller: Aaron Equipment Co
Location: Wood Dale, IL
Mfr: Unknown
used- belt conveyor. approximate 155'' long x 6" wide. driven by a.5hp, 1750 rpm gear motor.
