Also See 1 - 50 of 87 listings
2.5" x 5" Ross #TRM, 3-roll laboratory dispersion mill, 2-1/2" diameter x 5" long roll, e-stop chains
Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ross
Model: TRM
Ross, Model 2½" x 5" TRM, 3 Roll laboratory dispersion mill. Roll dimensions: 2½" diameter and 5" in length. 107 RPM back roller, 214 RPM middle roller and 428 RPM front roller. piped rollers with (1) 3/8" inlet and (1) 3/4" discharge. (4) handwheels for manual roll spacing ...more
2.5" x 11" U.S. Stoneware Jar roller, ball mill, .25 HP, #3305-1
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: U.S. Stoneware
Used US Stoneware jar roller, approximately 2.5" diameter x 11" long rubber rolls, with approximately.25 hp dc motor drive with approximately 9" OD diameter x 8.5" long jar less cap.
4" x 8" Ross #TRM, 3-roll mill w/volumes of product per hour, mounted on heavy duty base frame
Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ross
Model: TRM
Ross, Model 4 x 8 TRM, 3-Roll mill with volumes of product per hour – depending on materials and application. (3) 4" in diameter x 8" long rollers powered by 1 Hp motor drive, with hand crank gap adjustment, scraper blades and 8" long working roll area. All (3) rolls made of hardened steel. Roller ...more
4" x 20" California Pellet Mill #CL, pellet mill, 30-200 lb.pellets per hour, vibratory feeder
Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: California
Model: CL
California Pellet Mill, Model CL, Laboratory size pellet Mill. Rated from 30 to 200 pounds of pellets per hour – depending on materials, application and machine configuration. 17" long x 13" wide x 17" deep product hopper, 4" wide x 20" long vibratory feeder, 36" long x 4" OD ...more
5.5" x 8" Ross #Max1.4, 3 liter capacity, Stainless Steel media mill used for grinding, dispersing, emulsifying, deflocculating and deagglomeration
Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ross
Model: MAX1.4
Three liter capacity, S/S media mill used for grinding, dispersing, emulsifying, deflocculating and deagglomeration. Chamber size: 5.5" in Diameter; 8" in Length. s a jacket for cooling/heating, drip tray, psi and temperature gauges. Requires media per application., OAD: 24" L x 28" W x 30" H.
Get email updates for newly added Ball, Pebble, Sag Mills, Chemical Processing
Ball, pebble, and SAG (semi-autogenous grinding) mills are grinding machines used in chemical processing and other industries to reduce materials to fine powders or slurry. Ball mills use steel balls as grinding media, pebble mills use natural stone or ceramic media, and SAG mills use a combination of larger grinding media and the material itself. Common in mining, chemical processing, and materials manufacturing, these mills provide efficient, precise grinding, essential for achieving desired material properties.
9" x 15.5" Ball Mill Discharge Door, grated, 1" flange for mounting
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
one(1) used Ball Mill Discharge Door. 9" x 15.5" long Grated 1" flange for mounting.
12" x 24" Patterson pebble mill, 12" dia. x 24" L drum, on stand, #49102
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Patterson
Used Patterson pebble mill, approximately 18" diameter x 24" long drum, jacketed, on stand with motor drive.
18" x 24.5" Abbe, Ball Mill/Pebble Mill, Carbon Steel, 26 gallon, 3 HP, 220/440 V
Aaron Equipment Co | Wood Dale, IL
Seller: Aaron Equipment Co
Location: Wood Dale, IL
Mfr: Abbe
used- paul o abbe ball mill / pebble mill, carbon steel. approximate 26 gallon total volume. jacket chamber approximate 18" diameter x 24-1/2" long. driven by a 3hp, 3/220/440 volt motor. rotary unions. manhole cover. mounted on a painted carbon steel frame.
18" x 24" H. Sellsmans #8, ball mill
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: H. Sellsmans
Model: 8
H. Sellsmans Ball Mill. Model: No. 8. Approximate capacity: 16 gallons. Inside dimensions: 18 in diameter x 24 in. L. Alumina media charge at 50% ratio: 141 lbs. Typical mill rpms: (wet) 41, (dry) 44. Using porcelain balls as the grinding media, the H. Sellsmans ball mill is primarily used in testing applications to ...more
21" x 18" Pebble mill, 16 gallon wet capacity, Alumina brick lined chamber, 1.5 HP
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
One (1) used pebble mill Alumina brick lined chamber Inside dimensions: 21" diameter x 18" long 27 total gallons 16 gallon wet mill capacity Door opening: 8.25" x 8.25" 1.5 HP gear reduced drive with brake, 3 phase, 230/460V Bull gear and pinion gear On heavy duty stand.
30" x 54" Denver, ball mill, 10 HP, steel liners
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Denver
Denver 30" Diameter x 54" long Ball Mill with steel liners and ball charge. Incudes 16" x 12" infeed hopper at 57" feed height and 17" diameter overflow discharge. Mill is driven by 10 HP, 1175 RPM, 460 V, 3-phase, 60 Hz motor thryu v-belt assembly, including guard. Previously used in gold mining application., HP: 10 ...more
32" x 36" Paul O. Abbe, Ball Mill, 9-1/2" x 8" door, 5 HP, w/bull gear, pinion v-belt drive
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Paul O. Abbe
Paul O'Abbe ball mill, 32" diameter x 36" long (inner measurements) mounted on stand. Unit is carbon steel contacts, jacketed for water cooling. Unit has 9-1/2" x 8" door. Unit has 9-1/2" x 8" door. Includes 5 HP motor, bull gear and pinion v-belt drive., HP: 5, Diameter: 2.66', Type: Steel Lined ...more
32" x 42" Patterson, Paint Mill, 3' width x 4' L x 42" H overall dimension, 65 gallon capacity, 128 gallon total capacity, 14 psi jacket
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Patterson
Patterson Steel paint mill, 32" diameter X 42" long, with approx 65 gallon working capacity, batch type mill. Mill is jacketed for 14 PSI as cooling jacket. Unit rated 128 gallons total capacity. Unit is complete, mounted on stand. Overall dimensions are 3' wide x 4' long x 42" high. Mill has main bull gear in ...more
36" x 49.5" U.S. Stoneware #TDT6, ceramc pebble mill, 210 gallon, 10" round door opening
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: U.S. Stoneware
Model: TDT6
one(1) used US Stoneware Pebble Mill Ceramic Cylinder with high alumina, in good condition. Inside dimensions: 36" inside dia. x 49.5" long(end to end inside) 10" round door opening grinding door and a discharge grate door. Outboard roller bearings on a 3.5" diameter shaft. a Dodge Shaft Mount Gear ...more
39" x 43" Orbis #LBMS-3943-21, Lined Ball Mill, 2021
Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Orbis
Model: LBMS-3943-21
Year: 2021
Make: Orbis, Model: LBMS-3943-21, Year: 2021, Machine Location: Upon Request, CYLINDER, Inside Dimensions: (Steel Portion) 39" Diameter X 43" Long., Material of Construction: Steel Shell Lined with 2" thick Alumina lining. (Final Cylinder inside dimensions: 35" Diameter X 39" long)., Lining Material: Alumina Brick. ...more
42" x 48" Abbe #5BM, tumbling steel ball mill, 15 HP
JM Industrial LLC | Millwood, WV
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Abbe
Model: 5BM
Used 15HP Paul O Abbe Tumbling Steel Ball Mill - 42" Dia. X 48", Serial Number: A41360, Milling Drum Size: 42" X 48"L, Milling Drum: total volume of 38 cu/ft, DRY working capacity: 23 cu/ft, WET working capacity: 10 cu/ft, Internal lifter bars at 180, Drum product opening is 24" X 11", included ...more
48" x 60" Fiedler, Pebble Mill, 11' L x 5' width x 7' 6" tall outside dimension
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fiedler
Fiedler pebble mill 48" diameter x 60" long (interior dimensions), with running & discharge door, Unit less V-belt to pinion & bull gear drive (less motor), Mounted on stand. Outside dimensions - 11' long x 5' wide x 7'6" tall, Tiles look good and are all there. Overall good condition., Diameter: ...more
48" x 60" Patterson Industries #D, ball mill
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Patterson
Model: D
Patterson Industries Ball Mill. Approximate capacity: 369 gallons. Inside dimensions: 48 in diameter x 60 in. L. Arlcite (alumina media) charge at 50% ratio: 3038 lbs. Gallons of displacement at 50% volume: 122 balls. Constant grinding action is provided for in the Patterson Industries ball mill using porcelain balls ...more
54" x 60" Paul O. Abbe #PM-3C, ball mill
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Paul O. Abbe
Model: PM-3C
Paul O. Abbe Pebble Mill. Model: PM-3C. Total capacity: 480 gallons. Inside dimensions: 54 in diameter x 60 in. L. Alumina media charge at 50% ratio: 4430 lbs. Typical mill rpms: (wet) 21, (dry) 23. Using porcelain balls as the grinding media, the Paul O. Abbe ball mill s a proven tongue and groove high alumina brick ...more
58" x 54" Patterson, Ball Mill, Pebble Mill/Paint Mill, 10' x 5' x 8' 4" H overall dimension, 125 RPM gear reducer, 10 HP, 1186 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Patterson
Patterson pebble mill, paint mill, 48" diameter X 54" long, porcelain lined, full charge of assorted sized pebbles, draw off valve opposite loading door, mounted on stand. Includes tiles that are in good condition. Unit has gearbox, pinion gear/bull gear drive, driven by 10 HP, 1186 RPM, 230/460V, 3/60Hz motor. ...more
60" x 72" Patterson Industries #D, ball mill
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Patterson
Model: D
Patterson Industries Ball Mill. Model: Type D. Approximate capacity: 775 gallons. Inside dimensions: 60 in diameter x 72 in. L. Arlcite (alumina media) charge at 50% ratio: 5975 lbs. Gallons of displacement at 50% volume: 222 balls. Constant grinding action is provided for in the Patterson Industries ball mill using ...more
1.25" Alumina Pebble Mill Media, 1.25" to 0.5", 3391 lb.
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
One(1) used lot of Alumina Pebble Mill Media Mixed size: 1.25" to 0.5" 3,391 pounds Ships as 3,691 pounds.
1'4" x 1'5" Paul O. Abbe, Pebble Mill, porcelain, 1/2 HP, Underwriters lab tag motor, Motor starter with push buttons
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Paul O. Abbe
One (1) used Paul O. Abbe Pebble Mill 16" diameter x 17" long Porcelain lined 1/2 hp motor belt driven with belt guard Underwriters lab tag motor Motor starter with push buttons Safety cage around mill with front door access Steel hinged door with drain valve Door is steel will need a full gasket to keep ...more
1'6" x 22" Norton ball mill, #2650-4
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Norton
Used Norton dry grind ball mill, model MBA1, approximately 18" diameter x 22" long, in dry grind discharge shroud with grinding cover and discharge gate cover, driven by 1.5 hp, 230/460 volt variable speed drive with controls.
1'6" x 1'4" Steveco Lab, Pebble Mill, .75 HP, 14" ID x 12" long ID, 7/8" x 7/8" cylinders, 3 phase, 230/460 V.
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Steveco
One (1) used Steveco Lab Pebble Mill 18" diameter chamber x 16" long OD 14" inside diameter x 12" long ID 8 gallon total capacity, 5 gallon wet mill capacity Alumina brick lined, good condition 7/8" x 7/8" cylinder media included On stand with drive, bull and pinion gear 3/4 HP SEW ...more
1'10" x 1'10" Lab pebble mill, alumina brick lined, 1.5 HP, on stand with drive
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
One (1) used Pebble Mill, 22" x 22" 22" OD x 22" long chamber 20" ID x 17.25" inside length 23 gallon total capacity, 14 gallon wet mill capacity Alumina brick lined, good condition On stand with drive 1.5 HP gear reduced drive, 3 phase, 230/460V Drive Stearns electric brake Bull and ...more
1' 9.5" x 20" Patterson, Ball Mill/Reactor, 21.5" diameter x 20" Straight Wall plus Dished ends, 8 HP, 1977
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Patterson
Year: 1977
One (1) used Vacuum Sealable Patterson Ball Mill Reactor National Board Number 1758 Shell: Rated for 125 PSI or FV at 650 degrees F Jacket: Rated for 150 PSI at 650 degrees F Serial number: 770437 21.5" diameter x 20" straight wall plus dish ends Circular Door: 8" diameter Stainless steel chamber and ...more
2'5" x 29" Ball Mill, ceramic lined, 2 HP, 1750 RPM, 3 phase
EcReCon Inc. | Pedericktown, NJ
Seller: EcReCon Inc.
Location: Pedericktown, NJ
, used Ball Mill. Approximately 30"x 30" Chamber. Ceramic Lined. On stand with 2 HP, 3ph, 60 cyc, 1750 rpm motor.,., TYPE. BALL MILL.
2'6" x 36-1/4" Vicentini pebble mill, 92 gallon, Stainless Steel contact surfaces, #26913
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Vicentini
Used 92 gallon Vicentini pebble mill, model M41317, stainless steel contact surfaces, 32" diameter x 27" long drum, belt driven, on stands with approx. 1 HP motor drive, built 1989.
2'7" x 36" Paul O. Abbe, Pebble Mill Chamber, chamber only, 6.5" x 9.5" opening, 3" dia. Shafts, No stand, no drive
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Paul O. Abbe
one(1) used Paul O. Abbe Pebble Mill Chamber. 30" dia. x 36" long chamber. Door opening: 6.5" x 9.5" With bullgear, 3" dia. shafts. No stand, no drive. White alumina brick lined. Lining is good to excellent.
3' x 4' Economy ball mill, 15" x 10" door opening, forward/reversing, 3 HP, #75921
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Economy
SERIAL. 6988-3, DIAMETER OF DRUM. 36", LENGTH OF DRUM. 48", DOOR OPENING. 15" X 10", FORWARD & REVERSING. YES, PHASE. 3, MOTOR HORSEPOWER. 3.
3' x 4' Patterson Pebble Mill, Alumina Brick Lined, On legs with stand and drive
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Patterson
one(1) used Patterson Pebble Mill, 36" x 48" Serial number 621332 36" diameter x 48" long chamber Alumina Brick Lined - good condition On legs with stand and drive Bull gear and pinion gear babbit bearings Standard door - 8.25" x 12.5" Has a grinding door and a discharge door, with ball ...more
3' x 8' Paul O. Abbe, Carbon Steel ball mill, jacketed, internal lifter bars, 14 psi, 20 HP, 1755 RPM, serial #A28063, #2979-1
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Paul O. Abbe
Used 36" x 96 Paul Abbe ball mill, carbon steel construction, 36" diameter x 96" long jacketed chamber, with internal lifter bars, jacket rated 14 psi with rotary union, outboard roller bearings, on legs with 20 hp, 230/460 volt, 1755 rpm motor, belt driven thru Falk gearbox with 25.4:1 ratio, serial# ...more
3' x 8' Paul O. Abbe, Ball Mill, Carbon Steel, Jacketed, internal lifter bars, jacket rated 14 psi with rotary union
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Paul O. Abbe
Used 36" x 96" Paul Abbe ball mill, carbon steel construction, 36" diameter x 96" long jacketed chamber, with internal lifter bars, jacketed, outboard roller bearings, on legs with 20 hp, 230/460 volt, xp, 1755 rpm motor, belt driven thru Falk gearbox with 25.4:1 ratio, serial# A24905.
JUST ADDED!
3' x 8'8" Nordberg Metso, rod/ball mill, 1500 HP Motor
A M King Industries | Oroville, CA
Seller: A M King Industries
Location: Oroville, CA
Mfr: Nordberg
USED NORDBERG 13' x 18'8" (4m x 5.7m) Rod/Ball Mill with 1500 HP Motor.
3' x 12' Paul O. Abbe, Ball Mill, Carbon Steel, jacketed chamber, on legs, 30 HP motor drive, #49131
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Abbe
Used 36" x 144" Paul Abbe ball mill, carbon steel construction, 36" diameter x 144" long jacketed chamber, with internal lifter bars, jacket rated 14 psi with rotary union, outboard roller bearings, on legs with 30 hp, 460 volt, 1755 rpm motor, belt driven thru Falk gearbox with 24.262:1 ratio, serial# ...more
3'5" x 53" Ceramic lined pebble mill, 52 gallon porcelain lined, 20 HP, 230/460 V.
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Ceramic lined 40" diameter x 54" long pebble mill, 52-gallon, porcelain-lined. Driven by approximately 20 HP, 460/230 Volt, 3/60 Hz motor thru v-belt assemblies on motor sheave and drum sheave with belts turning drum, Drum RPM is approximately 34 RPM. Combination grinding and discharge door. System is unitized on ...more
3'9" x 4' Paul O. Abbe #4A, Pebble/Paint Mill, 251 gallon mill, 27 RPM @ 50% capacity, 4" width & 1' center to center tooth & 120 teeth Pinion gear, 28 teeth drive gear, 10 HP
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Paul O. Abbe
Model: 4A
Paul O. Abbe Model 4A pebble/paint mill, 3' 9" (1.14 m) x 4' (1.22 m), ceramic lined, batch type mill. Total mill volume: 251 gallons. Mill speed: 27 RPM when 50% full of pebbles or porcelain balls, missing hatch, Pinion gear: 4" wide, 1' center to center tooth, 120 teeth;drive gear has 28 teeth. ...more
3'10" x 4' Paul O. Abbe #5B-PM, Pebble Mill, 14 psi, 12" x 15" door, Alumina brick lined, 1962
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Paul O. Abbe
Model: 5B-PM
Year: 1962
One (1) used 42" x 48" Paul O. Abbe Pebble Mill Model 5B PM Serial number 89765 Built 1962, relined in 2006 Alumina brick lined, lining in excellent condition, very thick Internal rated for Atmospheric Jacket rated for 14 psi 12" x 15" door with side rails for easy removal Discharge drain opposite ...more
4' x 42" Patterson pebble mill, alumina lined ball mill, 10 HP, on stand w/drive
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Patterson
One (1) used Patterson Pebble Mill Serial number: K1299 48" diameter x 42" long chamber On stand with drive 70" high stands, floor to bearing mount Jacketed chamber, rated for 25 psi Babbit bearings Standard door: 9.5" x 15.25" Liquid drain with ball valve opposite side of door 10 hp motor ...more
4' x 8' Ball mill, drum, inlet & outlet covers, pinion gear, bearings, cover guard
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 4' X 8' ball mill., Includes:, Drum, inlet, and outlet covers, Pinion gear, Bearings, Cover guard, (2) half gear, Location: CANADA.
Steveco 5' x 42" Stevco, Pebble Mill, 20 HP, 230/460 V., 3 phase, Alumina brick lined, 9.5" x 15.75" urethane grinding door
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Steveco
One (1) used 5' diameter Stevco Alumina Pebble Mill The Stevenson Mfg. Co. 5' diameter x 42" long chamber Alumina brick lined, very good condition Roller bearings 20 hp SEW-Eurodrive gear reduced with brake 230/460 V, 3 phase Bull and pinion gear Urethane grinding door: 9.5" x 15.75" Includes ...more
5' x 3'5" Steveco, Pebble Mill, Alumina brick lined, 9.5" x 15.75" Urethane grinding door, 20 HP
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Steveco
One (1) used 5' diameter Steveco Pebble Mill 5' diameter x 42" long Alumina brick lined - good condition Urethane grinding door, standard 9.5" x 15.75" size 20 hp SEW-EURODRIVE gear reduced drive with brake Bull and pinion gear - good condition Roller bearings, on short steel legs Short steel ...more
5' x 4' Abbe, pebble mill, jacketed for 14.7 psi @ 250°F, #22751 (2 available)
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Abbe
Used Paul Abbe Rubber Lined Pebble Mill, 5' diameter x 4' straight side, modern fabricated carbon steel body, jacketed for 14.7 PSI at 250 degrees F, gear and pinion design, sleeve style bearings, designed for dry grind discharge with stainless steel shrouds, on stands with 75 H.P. 230/460 volt motor drive ...more
5' x 4' Paul O. Abbe, pebble mill Carbon Steel, jacketed, 14.7 PSI at 250 degrees F, 75 H.P. 230/460 volt motor drive, 1995
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Abbe
Year: 1995
Used Paul Abbe steel Pebble Mill, 5' diameter x 4' straight side, modern fabricated carbon steel body, jacketed for 14.7 PSI at 250 degrees F, gear and pinion design, sleeve style bearings, designed for dry grind discharge with stainless steel shrouds, on stands with 75 H.P. 230/460 volt motor drive, serial# ...more
6' x 5' Economy pebble mill with media, alumina lined, with motor starter & disconnect
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Economy
One (1) used 6' x 5' Economy Inc. pebble mill, alumina ceramic lined 6' diameter x 5' long chamber White alumina brick lined chamber (Aluminum Oxide ceramic) Solid grinding door, and slotted discharge door Dry dishcarge shroud included Gear reduced drive with VFD inverter for variable speed ...more
6' x 5' Patterson, Porcelain Line Peble Mill/Paint Mill, 35 psi shell
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Patterson
Patterson porcelain lined pebble mill, paint mill, measures 6' diameter x 5' long. Shell is jacketed and rated for 35 PSI. Set up as combination running and discharge door. Includes some grinding media. Lining needs repair. Less drive motor, pinion gear and door., Diameter: 6', Type: Ceramic Lined ...more
6' x 6' Steveco, Pebble Mill, Alumina brick lined, 10" x 14" urethane grinding door, standard drain door, 40 HP, 3 phase, 230/460 V.
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Steveco
One(1) used 6' x 6' Steveco Pebble Mill 6' diameter x 6' long chamber Alumina brick lined - good condition Roller bearings pinion gear and bolt on bull gear 10" x 14" urethane grinding door and standard drain door Steel fabricated legs 40 hp gear reduced SEW Eurodrive 3 phase, 230/460V ...more
6' x 8' Abbe, Ball Mill, Carbon Steel, Jacketed, 100 HP, #3093-1
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Abbe
Used 6' x 8' Paul Abbe jacketed steel ball mill, approximately 6' diameter x 8' long, jacketed chamber, gear and pinion driven with approximately 100 motor drive, on stands.
6' x 8' Paul O. Abbe, ball mill, jacketed, gear & pinion driven, 100 motor drive, on stands
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Abbe
Used 6' x 8' Paul Abbe jacketed steel ball mill, approximately 6' diameter x 8' long, jacketed chamber, gear and pinion driven with approximately 100 motor drive, on stands.
