17 Results
Battenfeld Fischer #BFB1-6D, Blow Molder, 12 Ton Clamp Force, 18.11" Stroke, 1993
Superior Machinery | Burt, MI
Category: Plastic Blow Molders
Seller: Superior Machinery
Location: Burt, MI
Mfr: Battenfeld
Model: BFB1-6D
Year: 1993
, Clamp Force: 12 TonsClamp Stroke: 18.11"Platen opening stroke (Min / Max): 16.53" / 26.96", Dual ShuttleMulti-LayerIn-Machine Trim3) Extruders - 60mm, 90mm, 60mmMueller Dual 200mm PE Processing HeadsSiemens ElectricsReliance DC Motor Controls6) Molds availableManualsConveyorControl system: BlowCommand 002Version: ...more
Battenfeld #BK850/200, horiz.injection molder, 12" max.platen opening, 13.8" max.adj.open stroke, Unilog 4000,1085, #45064
Federal Equipment Company | Cleveland, OH
Category: Plastic Blow Molders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Battenfeld
Model: BK850/200
Used 85 ton Battenfeld horizontal injection molder, model BK850/200, maximum platen opening of 12", maximum opening stroke (adjustable) 13.8", with Unilog 4000 controller, built 1985.
Eceng, Plastic Blow Molder, 2-6 Cavity, 1000 pieces of 500 mm bottles/hr, 2L bottle capacity
Machinery & Equipment Co | Brisbane, CA
Category: Plastic Blow Molders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Eceng
Plastic Blow Molder, manufactured by Eceng Machine. Unit can be used from 2-Cavity to 6-Cavity with a capacity of up to 1,000 500ml bottles/hr. Can produce up to 2L bottles. Complete with PLC control panel. Previously used in production of plastic packaging. Very good condition., Basis: FOB.
FlexBlow #FB2-3, Stretch Blow Molding Machine
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Flexblow
Model: FB2-3
Year: 1900
Make: FlexBlow, Model: FlexBlow, Year: 1900, Machine Location: Upon Request, – Flow Regulation: Supreme mold chilling, – Pressure Regulation: Electrical pressure regulation and control for 1st, 2nd blowing and compensation plates, – LP Air Flow: Regulation of LP air-flow for each cavity separately ...more
Graham #GEC-40SP4884, single 40 lb. accumulator head blow molder, 26:1 L/D ratio, 1998
Absolute Machinery Corp | Worcester, MA
Category: Plastic Blow Molders
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Graham
Model: GEC-40SP4884
Year: 1998
Number of Heads: (1) Single | Head Center Spacing: 8" | Head Shot Size Capacity: 40 lbs. | Horsepower: 200 | Head Tooling Size (Min & Max): 5" to 18" | Minimum Shot Height: 16" | Platen Size: 74" x 84" | Daylight Opening (Max): 72" | Clamp Tonnage: 190 | Number of Extruders: (1) One | Screw Size: 4.5" | L/D Ratio: ...more
Get email updates for newly added Plastic Blow Molders
Hartig #SMP-30-206-3624S40, dual head blow molder, Maco 8000 controller, 1990
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: hainesport, NJ
Mfr: Hartig
Model: SMP-30-206-362
Year: 1990
Used Hartig dual head Blow Molder each with 6 pound capacity. Model #SMP-30 206-3624S40, order number R-5959. New 1990. Has Maco 8000 programmable controller. Unit has a 3" 24/1 air cooled extruder with a Lufkin DH200D-511 gearbox having a reduction ratio of 13.93/1 and a service rating of 173 HP. Gearbox is direct ...more
Jomar #135E, 135 ton, 3" Egan extruder, 25:1 L/D, 10" Shut Height, s/n #4000-034, 1994, #8145
Arlington Machinery | Lake Zurich, IL
Category: Plastic Blow Molders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Jomar
Model: 135E
Year: 1994
Product s, Used Jomar Blowmolding Machine Model 135E S/N 4000-034, 1994 Vintage, Extruder Diameter.3" Egan Extruder, L/D Ratio.25:1, Horsepower.125, Clamp Tonnage.135, Blow Clamp Tonnage.28, Shut Height.10", Press Stroke.6", Max Die Set Size.35.5" Wide x 19" Deep, Dual Allen Bradley PLC 2/16 With XY Com Color CRT, 300 ...more
Kautex #KCC2Q-D, extrusion blowmolding, 29" x 18" mold, Beckhoff controller, 2007
Arlington Machinery | Lake Zurich, IL
Category: Plastic Blow Molders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Kautex
Model: KCC2Q-D
Year: 2008
Product s, Used Kautex Model KCC2Q-D Extrusion Blowmolding Machine, Dual Station, Single Layer,Extruder, 4 Heads, 7" Centers. Current Mold Size is 29"x 18", W Muller Type S490-170 T-PE-TK-IK Head With Servo Zylinder 220/30TH10, 150 Hp Extrusion Motor With ABB Drive, 3 Barrel Heating Zones, Air Cooled, 44kw Hydraulic ...more
Magic #ME-L1/ND, Blow Molder, 4 Heads, 1000 cm3 container vol., 30 kN closing, 1,1 Sec. dry cycle, 290/285/280 mm mould dims, 2018
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Magic
Model: ME-L1/ND
Year: 2018
Make: Magic, Model: ME-L1/ND, Year: 2018, Machine Location: Upon Request, -Maximum Blown Container Volume: 1000 cm3, -Closing Force: 30kN, -Dry Cycle: 1,1 Sec., -Power Electric: 6 kW, -Opening Travel: 140 mm, -Max. Mould Dimensions:(WxLxH) 290/2×85/280 mm, -Number Of Screws 2, -Extruder:Screw Diameter: 38 L/D ...more
Magplastic #SSB-02 PET Bottle Blow Moulding Machine, 2009
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Magplastic
Model: SSB-02
Year: 2009
Make: Magplastic, Model: SSB 02, Year: 2009, Machine Location: Minnesota, Magplastic SSB02 PET Bottle Blow Moulding Machine, 2009, – Previously used for 1.75L, 1L, and.75L PET bottles, – System includes tote dumper, pre-form conveyor, and bottle blower, Machine technical data:, – Press closing force: ...more
Magplastic #SSB-02 PET Bottle Blow Moulding Machine, 2008
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Magplastic
Model: SSB-02
Year: 2008
Make: Amsler (Mag-Plastics), Model: SSB02, Year: 2008, Machine Location: Minnesota, Magplastic SSB02 PET Bottle Blow Moulding Machine, 2008, – Previously used for 1.75L, 1L, and.75L PET bottles, – System includes tote dumper, pre-form conveyor, and bottle blower, Machine technical data:, – Press ...more
Rocheleu #R4, blow molder, single head, 10" x 10" usable platen size, 1994
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Rocheleu
Model: R4
Year: 1994
Used Rocheleu Model R4 blow molder 200 gram (7 OZ), ands 10" x 10" usable platen size. Single head with Approx 16oz bottle mold included., Manufacturer: Rocheleu, Model: R4, Will accomodate up to 1 Gal. max container size., Hydraulic operation with pump and operator control including Mitsubishi F2 6M programmer. ...more
Sidel #SB01, PET preform fed blow molder, single head design, reconditioned 2023
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Sidel
Model: SB01
Used Sidel PET Preform Fed Blow Molder, Manufacturer: Sidel, Model: SB01, Serial: 78, Single head design with mold for 20 ounce PET bottle, Includes 32-position preform conveyor with 15" long preheat oven and exhaust blower, Year: New 2000, and reported reconditioned January 2023, Used 100 ton CSD horizontal hydraulic ...more
Uniloy #60043, 6-cavity mold for 32 LDL bottle, trim tooling
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Uniloy
Model: 60043
Used Uniloy 6-cavity mold number 60043 for 32 ounce LDL bottle. Includes trim tooling. Previously used with Uniloy model 350R and 250R blow molders. Part wt. without flash 49 grams., Location: On Site at Perry (Hainesport, NJ - USA).
Uniloy #80200, 4-cavity mold for oval handle bottle, 128 oz., trim molding
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Uniloy
Model: 80200
Used Uniloy #80200 128 ounce 4-cavity mold for oval handle bottle. Designed for use with 350R blow molder. Includes trim tooling. Part wt. 143 grams without flash. 38mm cap size., Location: On Site at Perry (Hainesport, NJ - USA).
Uniloy #90144, 4-cavity mold for a 200 oz. handle bottle, trim molding
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Uniloy
Model: 90144
Used Uniloy 4 cavity mold for a 200 ounce handle bottle #90144. Designed for blow molder with 14.5" centers. Includes trim tooling. Part wt. 250 grams without flash., Location: On Site at Perry (Hainesport, NJ - USA).
Uniloy, 5-cavity plastic bottle mold for 42 oz LDL squeeze bottle, trim molding
Perry Videx LLC | Hainesport, NJ
Category: Plastic Blow Molders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Uniloy
Used Uniloy plastic bottle mold for 42 ounce LDL squeeze bottle. 5-cavity design, includes trim molding. Previously used with Uniloy 350R and 250R blow molders. Includes trim tooling. Part wt. 63.4 grams without flash., Location: On Site at Perry (Hainesport, NJ - USA).
