1 - 50 of 66 listings
AMS #4.5x30, 4.5" x 30" puller/cutter co, R to L, Red Lion touchscreen Control panel, 2022
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Ams
Model: 4.5X30
Year: 2022
Used 4.5" x 30" AMS Puller/Cutter Combo, Model 4.5x30, New in 2022 1.5" Fly Cutter Bushing, 2KW Yaskawa AC Servo Fly Cutter Motor 4.5" x 30" Two Belt Puller, (2) 2HP Direct Drive Belt Motors (2) Cone Drive Gearboxes, 40:1 GB Ratio Red Lion Touchscreen Control Panel Right to Left Operation 240/3/60 - 20 Amps.
Battenfeld Gloucester, pull roll assembly, (2) 108" face x 10" dia rubber rolls, 1995
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Battenfeld
Year: 1995
Used Battenfeld Gloucester pull roll assembly having (2) 108" face X 10" diameter rubber rolls. Rubber is driven by a 3 HP AC motor through a gear reducer. Includes inverter ABD operator controls. 480 volts, 3 phase, 60 cycle. Serial number 36831-29. Built 10/1995., 1995 BATTENFELD GLOUCESTER 108" FACE X 10" DIA.
JUST ADDED!
Battenfeld-Cincinnati #MTV-125-P-E/2, Cutstream Cutter, 6 KA, 2014
HGR24 | Euclid, OH
Category: Pullers and Cutters
Seller: HGR24
Location: Euclid, OH
Mfr: Battenfeld-Cincinnati
Model: MTV-125-P-E/2
Year: 2014
Inventory No. 0526-040-0042 Manufacturer Battenfeld-cincinnati Model No. MTV 125 P-E / 2 Name Cutstream Cutter Arrival Date 06-19-2026 Dimensions L x W x H (inches) 102 x 68 x 72 Capacity 6 KA Weight (lb.) 2465 Category Plastics Condition Used Available Quantity 1 Serial No. 3801527-110 Make Year 2014 Item Cumin ...more
JUST ADDED!
Battenfeld-Cincinnati #P250-SFH/2400/500-TWIN-L, Pullstream Puller, 6 KA, 26.57 KVA, 2014
HGR24 | Euclid, OH
Category: Pullers and Cutters
Seller: HGR24
Location: Euclid, OH
Mfr: Battenfeld-Cincinnati
Model: P250-SFH/2400/500-TWIN-L
Year: 2014
Inventory No. 0526-040-0044 Manufacturer Battenfeld-cincinnati Model No. P250 SFH /2400/500 TWIN L Name Pullstream Puller Arrival Date 06-19-2026 Dimensions L x W x H (inches) 160 x 65 x 79 Capacity 6 KA Weight (lb.) 6960 Category Plastics Condition Used Available Quantity 1 Serial No. 3801459-083 Make Year 2014 Item ...more
JUST ADDED!
Battenfeld-Cincinnati Pullstream Puller, 6 KA, 22.14-26.57 KVA, 2014
HGR24 | Euclid, OH
Category: Pullers and Cutters
Seller: HGR24
Location: Euclid, OH
Mfr: Battenfeld-Cincinnati
Year: 2014
Inventory No. 0526-040-0043 Manufacturer Battenfeld-cincinnati Name Pullstream Puller Arrival Date 06-19-2026 Dimensions L x W x H (inches) 184 x 66 x 78 Capacity 6 KA Weight (lb.) 6890 Category Plastics Condition Used Available Quantity 1 Make Year 2014 Item Manuals, Battenfeld-cincinnati Digital Control Panel (2) ...more
Get email updates for newly added Pullers and Cutters
Pullers and Cutters (also known as extraction tools and cutting tools) are devices used for removing or cutting components in mechanical systems. Pullers are typically used to remove bearings, gears, or other parts from shafts, while cutters are used for precise cutting of materials like metal, plastic, or rubber. Commonly used in automotive, maintenance, and manufacturing industries, they are essential for efficient disassembly and material shaping in mechanical applications.
Brown, sheet cutter, 56" wide, manually adjusted blade carriage, 2005
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Brown
Year: 2005
Used 56" wide Brown sheet cutter. Serial #33171. New 2005. Has gearhead score cut cross cut slitting blade and manually adjusted blade carriage., 2005 BROWN 56".
CDS #CBH-40-6VL, Belt Puller, 6" x 40" capacity, 46" Centerline height, 1-28 FPM, 460 V, 2013
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
Model: CBH-40-6VL
Year: 2013
6" x 40" CDS Model CBH-40-6VL Belt Puller, New In 2013 Speed Range: 1-28 FPM Centerline Height: 46" +/- 2" 460/3/60, 6A S/N 20769-250913 FPM Digital Gauge Approximate Dimensions: 62" L x 36" W x 76" H JUST PURCHASED PHOTOS COMING SOON.
CDS #CCH-40-8, Cleated Two Belt Puller, 8" x 40", 3 HP, 1750 RPM, 2.5-44 FPM, 2005
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
Model: CCH-40-8
Year: 2005
Used 8" x 40" CDS Cleated Puller, Model CCH 40-8 40" L x 8" W Belts, Manual Height Adjustment 3HP Baldor Motor, 1750rpm, 180Volt - 14Amp Nord Gearbox, 31.92 Gearbox Ratio Durant Ft/min Speed Gauge, Start/Stop Buttons 0.5-44 Feet/Min Speed Rating (FPM is Reading Incorrectly/Slower) SEE VIDEO S/N: 270505 Machine Wired ...more
CDS #CCH60-8V-L, Cleated Belt Puller, 8" x 60", 0.35-21 FPM, 2/2 HP dual ABB independent drs, LR, pneu open/close, 460 V.
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
Model: CCH-60-8V-L
Used 8" x 60" CDS Cleated Puller, Model CCH-60-8V-L AC Individually Driven Belts (2) 2hp AC Motors, 1750-6000 rpm /Nord Gearboxes Dual ABB AC Drives with Pendants Pneumatic Belt up/down, Durant Load Percentage Gauge, Durant Digital Ft/Min Gauge 480/60/3 - 9A 0.35-21 Ft/Min Left to Right Operation S/N: 360404 ...more
CDS #CCH60-8AC, cleated belt puller, 8" x 60", 1760-6000 RPM, pneu raise, 4-40 FPM, 2 independent 5 HP dr, digital read out
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
Model: CCH60-8AC
Used 8" x 60" CDS Puller Cleated Puller, Model CCH60-8AC Belts Individually Driven By (2) 5hp AC Baldor Inverter Drive Motors, 1760-6000RPM, Nord Gearbox Pneumatic Belt Up/Down, Puller Speed 4-40 Durant Digital AMP Gauge, Durant Digital FT/Min Gauge, Durant Pneumatic Cylinder Pressure Gauge, Speed POT, Balance and ...more
CDS #CCH60-8V-L, Cleated Belt Puller, 8" x 60", 0.35-21 FPM, 2/2 HP dual ABB AC dr, LR, pneu open/close, 460 V.
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cds
Model: CCH60-8V-L
Used 8" x 60" CDS Cleated Puller, Model CCH60-8V-L (2) 2HP AC Motors with 58.27 Gearbox Ratio Nord Gearboxes Left To Right Operation Dual ABB AC Drives Pneumatic Open/Close Durant FT/MIN & Load Percentage Gauges 0.35-21 FT/MIN Speed Range 42" Centerline 460/3/60 - 9 amps S/N: 90704 Approximate Dimensions: TBD.
CDS #CSFK-2.5D, Dual Head Fly Knife Cutter, 1/16"-2.25" Cut Capacity, 460 VAC input, 2004
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Cds
Model: CSFK-2.5D
Year: 2004
Used CDS dual head Servo driven fly knife cutter, with models CSFK2.5D-L and CSFK 2.5D, serial #110404 cutters. 460 volt AC input. New 2004. Will accommodate 2-lane extrusion of profiles. Cutting capacity 1/16" to 2.25". Package includes (2) Baldor 230/460 volt 50/60 HZ, Servo motors with (2) Baldor "Nextmove BX" PLC ...more
JUST ADDED!
Conair #3-20, 3" x 20" belt puller, 3.2 to 330 FPM, 3.25 HP servo motor, helical gearbox, 460 V., 2016
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: 3-20
Year: 2016
Used 3” x 20” Conair Model 3-20 Belt Puller 3.2 To 330 FPM 3.5” Max. Opening Servo Driven By 3.25 HP Servo Motor Through Helical Gearbox 42” +/- 2” 60 Durometer FDA White Nitrile Rubber Belts Right To Left Operation Pro Scale Digital Gap Sensor New In 2016 460/3/60, 5.2 Amps S/N: ...more
Conair #BP6-50, Belt Puller, 6" x 50" L Belt, 42.5" Centerline height, (2) 2 HP, 460 V, 2010
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: BP6-50
Year: 2010
Conair Belt Puller, Model BP6-50 50" Belt Contact Length, Independent Drive With 2Hp Motor 42.5" Centerline Height 460/3/60, 10.4A (2) 2 HP Marathon Electric Black Max AC Motor, S/N: C0050838-10/20-10 1750 RPM 460/3/60, 3A - Motor 145TC Frame NEW WEG Drive Nord Gearbox, SK 90221AXBN140TC, SN: 801044076800 Gear Ratio: ...more
JUST ADDED!
Conair #CPC426-CSC2, 1.75" puller/cutter combo, 26" x 4" belt, 1.5 HP AC motor, 1.5 HP servo fly cutter, 2005
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: CPC426-CSC2
Year: 2005
2" CPC426-CSC2 Conair Puller/Cutter Combo 26" L x 4" W Belt Driven By 1.5 AC Motor 1.75" Extrudate Capacity Per Conair 2.0" Bushing Diameter On Fly Cutter 1.5 HP Servo Fly Cutter 42" Centerline New In 2005 S/N 177574 460/3/60 Approximate Dimensions: 86" Lx 28" W x 70" H, 1,600 LBS NEW ARRIVAL - ADDITIONAL PHOTOS AND ...more
JUST ADDED!
1.25" Conair #CSC, servo fly cutter, 250-750 RPM, 42" centerline, 2-position aluminum head, 3.25 HP, 460 V., 2008
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: CSC
Year: 2008
Used 1.25" Conair CSC Servo Fly Cutter, 3.25 HP 1.25" Max Profile Diameter 250-750 RPM Range 42" Centerline Height (Adjustable) Aluminum Cutter Head, 2 - Position 460/3/60 On-Demand Cuts, Automatic Multi-Length Cuts Left To Right Operation HAS WIRING FOR ENCODER INSIDE CABINET. NOT TERMINATED ON CABINET. See Photos ...more
JUST ADDED!
Conair #6-39, extrusion profile belt pul, 6" x 39" belt contact area, manual crank height adjustment
KD Machinery | Scottsdale, AZ
Category: Pullers and Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Conair
Model: JUN-39
Used Conair 6-39 Extruder for Sale. This pre-owned Conair plastic extruder is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this Conair Extruder, please feel free to contact us. You may Activate Pricing to view the price of this Plastic ...more
Conair/Metaplast #PC12-60SP, Cleated Puller, R-L operation, 12" x 60", 1-10 FPM, (2) 2 HP Motors, 1750-6000 RPM, 460 V
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: PC12-60SP
Used 12" x 60" Conair/Metaplast Cleated Puller, Model PC12-60SP AC Individually Driven Belts (2) 2hp AC Motors, 1750-6000rpm, 1-10 Ft/Min 157.59:1 Ratio Nord Gearboxes Pneumatic Belt up/down, Load Percentage Gauge, Digital Ft/Min Gauge Baldor AC Drive with Pendent 460/3/60 - 9.5A Right to Left Operation S/N: 992135 ...more
Conair #PC12-60SP, Cleated Puller, L-R operation, 12" x 60", 1-10 FPM, 460 V, 1999
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: PC12-60SP
Year: 1999
Used 12" x 60" Conair Cleated Puller, Model PC12-60SP Individually Driven Belts by AC Motors & Gearboxes ABB AC Drive, 1-10 ft/min Contex ft/min Controller, Load Percentage Gauge Pneumatic Open/Close Left to Right Operation 460/3/60 - 13A S/N: 997043 New in 1999.
Conair/Metaplast #PC8-50SP, Cleated Puller, L-R operation, 1-10 ft./min., 10" x 50", (2) 2 HP Motors, 1750-6000 RPM, 460 V
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: PC8-50SP
Used 10" x 50" Conair/Metaplast Cleated Puller, Model PC8-50SP AC Individually Driven Belts, 1-10 Ft/Min (2) 2hp AC Motors, 1750-6000rpm 94.35:1 Ratio Nord Gearboxes Pneumatic Belt up/down, Load Percentage Gauge, Contrex M-Trim Drive Control, Speed POT Baldor AC Drive with Pendent 460/3/60 - 9.5A Left to Right ...more
Conair/Metaplast #PC8-50SP, Cleated Puller, R-L operation, 15" x 50", 1-10 FPM, (2) 2 HP, 1750-6000 RPM, 460 V
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Model: PC8-50SP
Used 15" x 50" Conair/Metaplast Cleated Puller, Model PC8-50SP AC Individually Driven Belts (2) 2hp AC Motors, 1750-6000rpm, 1-10 Ft/Min 157.59:1 Ratio Nord Gearboxes Pneumatic Belt up/down, Gefran Load Percentage Gauge, Durant Digital Ft/Min Gauge Baldor AC Drive with Remote Control with Speed Pod 460/3/60 - 9.5A ...more
Conair #PSC30D, Fly Knife Cutter, 3" Diameter, LE650 Control, 230 V
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Conair
Model: PSC30D
Used Conair fly knife cutter designed for approximately 3" diameter product. Model PSC30D. Serial #85001. Includes LE650 control, 230 volts, AC input., CONAIR PSC30D.
JUST ADDED!
Conair Vacuum Sizing Tank, 15" x 240" x 13", 3.5/5 HP, 460 V., 3 Ph., 6 Wheels
HGR24 | Euclid, OH
Category: Pullers and Cutters
Seller: HGR24
Location: Euclid, OH
Mfr: Conair
Inventory No. 0526-105-0006 Manufacturer Conair Name Vacuum Tank Arrival Date 06-11-2026 Dimensions L x W x H (inches) 256 x 68 x 54 Capacity 15 X 240 X 13 Electrical 3/50/60/460 Weight (lb.) 2130 Category Plastics Condition Used Available Quantity 1 Item Safety Switch, 6 Wheel, 3.5/5 Hp, 2850/3450 Rpm, 6.6 A.
Conair, 10" x 84" cleated belt pul, 2023
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Conair
Year: 2023
Used 10" x 84" Conair Cleated Belt Puller Model PC10-84 Cleat Width: 10" with 14" through clearance. Cleat Contact Length: 76" Maximum Opening: 9" w/ standard 1-inch cleat Cleat Type: 1-inch thick, 65A durometer cleated caterpillar-type traction belts; roller chain runs on support platforms. s a pneumatically ...more
Current Tools, Cable Puller System, Carriage Reel, Stand, Coupling, Accessories
OK Sales Inc | Burlington, NC
Category: Pullers and Cutters
Seller: OK Sales Inc
Location: Burlington, NC
Mfr: Current
Current Tools Cable Puller System Carriage Reel Stand Coupling Accessories Blue, Comes with the following pieces:, 8091 Mobile Carriage540FS 4" Cable Feeding Sheave2x 8098-3.5 Coupling8098-3 Coupling8094-4 Coupling8097-4 Slip-In coupling8099 Coupling Adapter8100 T-Stand8093 Elbow Unit812 12" Hook Sheave2x 680 Ratchet ...more
Daikin #SUT10D80L21-10-F, Servo hydraulic super unit, 21.9 GPM, 20.6 MPa, dual gear pump, 2011
Absolute Machinery Corp | Worcester, MA
Category: Pullers and Cutters
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Daikin
Model: SUT10D80L21-10-F
Year: 2011
Model: SUT10D80L21-10-F, Tank Capacity: 100 L, Pump Type: Duel Gear Pump, Max Pump Discharge Rate: 21.9 gal/min (83.0 L/min), Max Operating Pressure: 20.6 MPa.
Merritt Davis #80, Solid Belt Puller, 6" Wide x 80" L, 15 HP, 460 V, No motor drive
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis
Model: 80
Used 6" wide Merritt Davis model 80 solid belt puller supplying 80" belt contact length and approximately 8" of daylight on belts. Top and bottom belts are driven by drive shaft from 15 HP motor, and approximately 6" of adjustment on the bottom belt for line centering height. Has manual hand crank gap adjustment on ...more
Merritt Davis #80, Solid Belt Puller, 6" Wide x 80" L, 15 HP, 460 V, No motor drive
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Davis
Model: 80
Used 6" wide Merritt Davis model 80 solid belt puller supplying 80" belt contact length and approximately 8" of daylight on belts. Top and bottom belts are driven by drive shaft from 15 HP motor, and approximately 6" of adjustment on the bottom belt for line centering height. Has manual hand crank gap adjustment on ...more
Elite Cameron #CC300, core cutter for 3" cores, 120" wide, AB Panelview 550, 2002
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Elite
Model: CC300
Year: 2002
Used 120" wide Elite Cameron Model CC300 core cutter for 3" cores. Serial #3M02500. Year 2002. With Allen Bradley Panel View 550 touch screen control panel., 2003 ELITE CAMERON CC300.
Farris #8550F, 12" x 30" solid belt puller, manual belt adjustment, vari-speed transmission
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Farris
Model: 8550F
Used Farris 12" Wide x 30" Long Solid Belt Puller, Manufacturer: Farris, Model: 8550F, Serial: 5269, Has manual belt adjustment, and variable speed transmission, Rated 3-50 feet per minute, FARRIS 8550F.
Conair Gatto #2-4/24, Downcut Traveling Saw, 42" centerline, 2 HP, 460 V.
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gatto
Model: 2/4/2024 12:00:00 AM
Conair Gatto 2-4/24 Downcut Traveling Saw 42" Centerline +/- 2" 2 HP Motor S/N: 819315 460/3/60 Approximate Dimensions: 50" L x 36" x 62" H.
Gatto #207-6PC-48, Puller, 3.5" x 48", 3.5" width Chain, 5 HP, 480 V
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gatto
Model: 207-6PC-48
3.5" x 48" Gatto Puller Model 207-6PC-48 Currently Has Single Chain 3.5" Width w/ Capacity To Add An Additional Chain For 7" Width Pneumatic Hold Down Currently 480 plug, Has Transformer To 1ph 230 volt 5 HP Motor To IronMan By OHIOGEAR Gearbox, Model B852-40-1, 40:1 Ratio, New in 2003 S/N: 9314205 Overall Dimensions ...more
JUST ADDED!
Gatto #MARK-IV-ERC-2DR, extrusion cutter, 2" capacity, 1996
KD Machinery | Scottsdale, AZ
Category: Pullers and Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Gatto
Model: MARK-IV ERC-2DR
Year: 1996
Used Gatto MARK-IV ERC-2DR Extruder for Sale. This pre-owned Gatto plastic extruder is located in New Jersey and available to be seen under power for an inspection. If you have any questions regarding this Gatto Extruder, please feel free to contact us. You may Activate Pricing to view the price of this Plastic ...more
Gatto, Fly Knife Cutter, Servo Driven, 4" Diameter
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Gatto
Used Gatto 4" O.D. servo driven fly knife cutter. Includes drive controls and operator controls., GATTO 4" DIA.
Kiwex #KWX-10, Belt Puller, (2) 7" width x 60" L Belts, (2) 3 kW, 460 V, 2018
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Kiwex Machinery
Model: MODEL KWX-10
Year: 2018
Used 7" x 60" Dual up Kiwex Belt Puller, Model KWX-10 (2) 7" W x 60" L Belts, Belt Centerlines 13.5" Apart (2) 3kw Motors with Gearboxes Mechanical Raise/Lower for Each Belt (2) Speed Gauges, Start/Stop Buttons for Each Belt (2) ABB AC Drives 460/3/60 Serial Number: KWX201805H-5 New in 2018 Dimensions: 82" L x 58" W x ...more
Maplan #503, cleated belt puller, 8" width x 120" L, 4" profile, 3" vertical adj, 480 V., dual 5 HP motors, motorized raise
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maplan
Model: 503
Used 8" W x 120" L Maplan Cleated Belt Puller, Model 503 4" Max Profile Height, 3" Vertical Adjustment Independent Drives, 5 HP WEG Motors With Cone Drive Gearboxes 42" Centerline +/- Approx. 3" Dual Pneumatic Hold-down Cylinders Motorized Raise Ft/Min Gauge, Torque Percentage Gauge 30 Amps 460/3/60 S/N: 129973 New ...more
Maplan #503, cleated belt puller, 8" width x 120" L, 42" centerline, 480 V., dual 5 HP motors
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Maplan
Model: 503
Used 8" W x 120" L Maplan Cleated Belt Puller Model 503 20 FPM Max Speed (2) 5 HP Marathon Black Max Motors Driven Through Cone Drive 225:1 Gearboxes, NEW WEG AC Drive Dual Pneumatic Holddown Cylinders Motorized Raise, Ft/Min Gauge, Torq % Gauge 30A, 480V 42" Centerline S/N 129973 Approximate Dimensions: 130" L x 54" ...more
Metaplast #MVSP10-2-5L, Vacuum Sizing Table, approx. 24" wide x 120" long w/vacuum pump, #3179-5
Federal Equipment Company | Cleveland, OH
Category: Pullers and Cutters
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Metaplast
Model: MVSP10-2-5L
Used Metaplast vacuum sizing table, model MVSP10-2-5L, approximately 24" wide x 120" long with vacuum pump, circulation pump and reservoir, with MAWS20-68L Metaplast tank, tank serial# 790142, tablet serial# 790141.
Conair/Metaplast #PC8-50SP, 8" x 50" cleated puller, 1-10 FPM, 1750-6000 RPM, Fr.145TC
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Metaplast
Model: PC8-50SP
Used 8" x 50" Conair/Metaplast Cleated Puller, Model PC8-50SP Low Speed: 1 Ft/Min High Speed: 10 Ft/Min (2) 2 HP Baldor AC Motors, Cat. No: IDM3587T, Frame 145TC RPM 1750-6000 2 Nord Gearboxes, Ratio 94.35 : 1 Pneumatic Belt up/down, Load Percentage Gauge, Contrex M-Trim Drive Control, Speed POT, Digital FPM Readout ...more
Metaplast #PC896, 8" x 96" cleated puller, 42.5" centerline, new Weg CFW500 AC drive, (2) 3 HP AC motors
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Metaplast
Model: PC896
Used 8" x 96" Metaplast Cleated Puller, Model PC896 Centerline 42.5" Brand New Weg CFW500 AC Drive, Individually Driven Belts (2) 3 HP AC Motors, 1760-6000rpm 64.55 Ratio Nord Gearbox 460/3/60 - 12A S/N: 595052 Brand New Cleats 60 Duro Load Percentage Readout, Digital Ft/Min Gauge Approximate Dimensions: 120" L x 38" ...more
JUST ADDED!
Novatec #C-2, fly knife cutter, 2" profile diameter, 42" centerline, 5 HP, 1000 RPM max blade speed, 12" SS304 cutter head, 480/3/60, Siemens PLC (2 available)
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Novatec
Model: C-2
Used 2" Novatec C-2 Fly Knife Cutter, 5 HP 2" Max Profile Diameter 42" Centerline Height (Adjustable) Blade Mount: 12” SS304 Cutter Head 1,000 RPM Max Blade Speed Continuous Mode: 800 Cuts/Min On-Demand Mode: 300 Cuts/Min @ 600 RPM Bushing Diameter: 2.25" Max Peak Torque: 94 FT/LB 230/3/60 Machine Currently ...more
JUST ADDED!
Novatec #C-2, fly knife cutter, 2" profile diameter, 42" centerline, 5 HP, 1000 RPM max blade speed, 12" SS304 cutter head, 480/3/60, Siemens PLC
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Novatec
Model: C-2
Used 2" Novatec C-2 Fly Knife Cutter, 5 HP 2" Max Profile Diameter 42" Centerline Height (Adjustable) Blade Mount: 12” SS304 Cutter Head 1,000 RPM Max Blade Speed Continuous Mode: 800 Cuts/Min On-Demand Mode: 300 Cuts/Min @ 600 RPM Bushing Diameter: 2.25" Max Peak Torque: 94 FT/LB 230/3/60 Machine Currently ...more
JUST ADDED!
2" Novatec #C-2, fly knife cutter, 12" Stainless Steel cutter head, 1000 RPM max blade, 5 HP, 230/460 V., Siemens PLC
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Novatec
Model: C-2
Used 2" Novatec C-2 Fly Knife Cutter, 5 HP 2" Max Profile Diameter 42" Centerline Height (Adjustable) Blade Mount: 12” SS304 Cutter Head 1,000 RPM Max Blade Speed Continuous Mode: 800 Cuts/Min On-Demand Mode: 300 Cuts/Min @ 600 RPM Bushing Diameter: 2.25" Max Peak Torque: 94 FT/LB 230/3/60 Machine Currently ...more
JUST ADDED!
OEM #PV2/8-10-8F, Puller, 5 HP, 32-3/4 A., Allen Bradley PanelView Plus, 2000
HGR24 | Euclid, OH
Category: Pullers and Cutters
Seller: HGR24
Location: Euclid, OH
Mfr: Oem
Model: PV2/8-10-8F
Year: 2000
Inventory No. 0526-040-0034 Manufacturer Oem Model No. PV2/8-10-8F Name Puller Arrival Date 05-27-2026 Dimensions L x W x H (inches) 235 x 48 x 88 Electrical 3/60/480 Weight (lb.) 7940 Category Plastics Condition Used Available Quantity 1 Serial No. OFM308-3827 Make Year 2000 Item 32 3/4 A, 5 Hp, 10 Ka, Allen Bradley ...more
JUST ADDED!
OEM #PV2/8-10-8F, Puller, 5 HP, 32-3/4 A., Allen Bradley PanelView Plus, 2001
HGR24 | Euclid, OH
Category: Pullers and Cutters
Seller: HGR24
Location: Euclid, OH
Mfr: Oem
Model: PV2/8-10-8F
Year: 2001
Inventory No. 0526-040-0033 Manufacturer Oem Model No. PV2/8-10-8F Name Puller Arrival Date 05-27-2026 Dimensions L x W x H (inches) 235 x 48 x 88 Electrical 3/60/480 Weight (lb.) 7890 Category Plastics Condition Used Available Quantity 1 Serial No. OFM308-3826 Make Year 2001 Item 32 3/4 A, 5 Hp, 10 Ka, Allen Bradley ...more
PCI #78FB Cutter, rotating blades, (1) Stationary Blade, Mounted on Frame
Revelation Machinery | Chicago, IL
Category: Pullers and Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Pci
Model: 78FB
Year: 1900
Make: PCI, Model: 78FB, Year: 1900, Machine Location: Illinois, Two (2) Rotating Blades, One (1) Stationary Blade Directly Driven by a 2 HP 208-230/460 Volt 1725 RPM A/C Motor, Mounted on Frame, Two Trim Inlets. S/N 71992, Trim Cutter on Unitized Frame with Sterling Model 6UHE Blower, Aluminum Impeller and Direct ...more
JUST ADDED!
Plastic Extrusion Machinery #325, extrusion belt puller, 5" x 26.5" contact area, 3 HP, 20-100 FPM, 1996
KD Machinery | Scottsdale, AZ
Category: Pullers and Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Plastic Extrusion Machinery
Model: 325
Year: 1996
Used Plastic Extrusion Machinery 325 (1996) Extruder for Sale. This pre-owned Profile Puller plastic extruder is located in Massachusetts and available to be seen under power for an inspection. If you have any questions regarding this Plastic Extrusion Machinery Extruder, please feel free to contact us. You may ...more
RDN #130.64, Belt Puller, approximatley 6" wide x 29" contact length, smooth belt, 230 volt, S/N 0185-20268.
Federal Equipment Company | Cleveland, OH
Category: Pullers and Cutters
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Rdn
Model: 130.64
Used 6" RDN puller, model 130.64, approximatley 6" wide x 29" contact length, smooth belt, 230 volt, serial# 0185-20268.
JUST ADDED!
RDN #3-18, extrusion cutoff saw, 12" blade, 3" max pipe profile, 1.5 HP, Allen Bradley Control, 2004
KD Machinery | Scottsdale, AZ
Category: Pullers and Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Rdn
Model: 18-MAR
Year: 2004
Used RDN 3-18 (2004) Extruder for Sale. This pre-owned RDN plastic extruder is located in The United States and available to be seen under power for an inspection. If you have any questions regarding this RDN Extruder, please feel free to contact us. You may Activate Pricing to view the price of this Plastic Extrusion ...more
RDN #EMC3DC, Fly Knife Cutter, 3" Diameter, 1994
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Rdn
Model: EMC3DC
Year: 1994
Used RDN Fly Knife Cutter for Maximum 3" Diameter Product, Model EMC3DC, Serial #33183, New 7/1994, Includes operator controls, Click on the link below to see a video of the machine running., RDN EMC3DC.
