1 - 50 of 91 listings
40/100 GPM @ 25/31' TDH, Nagle #TWO-RS-80-OR, 2" cantilever slurry pump, 5 HP
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Nagle
Model: TWO-RS-80-OR
SKU: 27065, Model: TWO-RS, Condition: Used, S/N: B7-1071, Horsepower: 5 hp, GPM: 40/100, Head: 25/31 ft., RPM: 1050 rpm, Made In: UNITED STATES, Dimensions: 36.00 (H) x 36.00 (W) x 84.00 (L) inches, Additional :, Size: 2".
135 GPM @ 33' TDH, Nagel #CWO-CS71-OQ, submerisble slurry pump w/10 HP motor, 2.5"
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Nagel
Model: CWO-CS71-OQ
SKU: 27062, Model: CWO-CS, Condition: Used, S/N: A7-1351, Horsepower: 10 hp, GPM: 135, Head: 33 ft, RPM: 1290 rpm, Electrical :, Voltage: 240/480 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 48.00 (H) x 34.80 (W) x 93.60 (L) inches, Additional :, Size: 2.5", Casing: Split casing design.
135 GPM @ 43' TDH, Nagle #CWO-CS71-OQ, submersible slurry pump with 10 HP motor
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Nagle
Model: CWO-CS71-OQ
SKU: 27064, Model: CWO-CS, Condition: Used, S/N: B8-1170, Horsepower: 10 hp, GPM: 135, Head: 43 ft., RPM: 1632 rpm, Electrical :, Voltage: 240/480 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 30.00 (H) x 24.00 (W) x 72.00 (L) inches, Additional :, Size: 2.5".
200 GPM @ 80' TDH, Warman #4SA45272RC6077, Slurry Pump, 4" discharge, 24 HP, 1200 RPM, 460 Volts, abrasion resistant, (3 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Warman
Model: 4SA45272RC6077
Model: 4SA45272RC6077Condition: New Surplus4in. DischargeLength: 72in. Pump LegRated @ 200 GPM, 80ft HeadMetal Liners and ImpellersDouble Suction Semi-Open ImpellerCantilever Shaft DesignDual Volute Casing DesignAbrasion ResistantMotor anand Drive24 hp Motor460 Volt1200 RMpDirect-CcoupledWeight: 3,229lbs3 Units ...more
220 GPM @ 80' TDH, Galigher, Slurry Pump, 11" neoprene impeller, 2-1/2" suction x 2" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Galigher
Capacity range: 60 gpm - 220 gpm.20 ft. - 80 ft. head.Rubber (Neoprene) lined.Rubber (Neoprene) impeller. 11 inch Dia.2.5 inch inlet.2 inch discharge.Flanged connections.Standard stuffing box With graphite packing sealing arrangement.Complete with overhead motor base., View Spec Sheet BelowLocation: British Columbia ...more
Get email updates for newly added Slurry Pumps
Slurry Pumps (also known as sludge pumps) are heavy-duty pumps designed to transport mixtures of liquids and solids, such as sand, coal, or ore. Commonly used in industries like mining, construction, and wastewater treatment, they are ideal for handling abrasive, high-viscosity, or corrosive slurries. Slurry pumps are essential for efficient material transport in challenging environments requiring durability and reliability.
300 GPM @ 40' TDH, GPM #SBLH4S15-6T5, heavy duty submersible low head slurry pump, 15 HP
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Gpm
Model: SBLH4S15-6T5
SKU: 108229, Model: SBLH4S15-6T5, Condition: Used, S/N: 3741, Horsepower: 15 hp, GPM: 300, Head: 40 ft., RPM: 1200 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 62.00 (H) x 20.00 (W) x 32.00 (L) inches, Additional :, Discharge: 4", Suction: 6", Power: 15HP (11kW) ...more
325 GPM @ 410' TDH, Toyo #DBH-100/75-MDHM, High Chrome Slurry Pump, 4" suction x 3" discharge, 100 HP, 575 Volts, 2005, (4 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Toyo
Model: DBH 100/75 MDHM
Year: 2005
Model: DBH 100/75 MDHMYear: 2005Qty: 4Baldor 100 HP Motor 575 Volt 1785 RPMPump Driven withPump Base and Guard Flow: 325 US GPM, 410 ft. HeadMechanical Seals Rotation Counter Clockwise 19.7 in. Diameter ImpellerMax Solid Size.652Location: British Columbia, Canada.
JUST ADDED!
350 GPM @ 240' TDH, Warman #032CAHRRRMM2660, Horizontal Centrifugal Slurry Pump, 3" suction x 2" discharge, 7-1/2 HP, 1755 RPM, 575 V., 3PH
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Warman
Model: 032CAHRRRMM2660
SKU: 157359, Model: 032CAHRRRMM2660, Condition: Used, S/N: MDS32088-M, Horsepower: 7.5 hp, GPM: 350, Head: 240 ft., RPM: 1755 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 43.00 (H) x 22.00 (W) x 45.00 (L) inches, Additional :, Full Model Code: 032CAHRRRMM2660, Suction ...more
JUST ADDED!
350 GPM @ 240' TDH, Warman #032CAHRRRMM2660, 3/2 AH Horizontal Centrifugal Slurry Pump, 3" suction x 2" discharge, 7.5 HP, 1755 RPM, 575 V.
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Warman
Model: 032CAHRRRMM2660
SKU: 157296, Model: 032CAHRRRMM2660, Condition: Used, S/N: MOS47357-M, Horsepower: 7.5 hp, GPM: 350, Head: 240 ft., RPM: 1755 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 44.00 (H) x 36.00 (W) x 26.00 (L) inches, Additional :, Full Model Code: 032CAHRRRMM2660, Suction Inlet: 3", Discharge ...more
JUST ADDED!
400 GPM @ 350' TDH, Krebs millMax #MM100-A43U, Centrifugal Slurry Pump, 4" suction x 3" discharge, 60 HP, 1775 RPM, 575 V., 3PH
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Krebs
Model: MM100-A43U
SKU: 157295, Model: MM100-A43U, Condition: Used, Horsepower: 60 hp, GPM: 400, Head: 350 ft., RPM: 1775 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 26.00 (H) x 42.00 (W) x 51.00 (L) inches, Additional :, Suction: 4", Discharge: 3", Flow (approx): 50 - 1000 GPM, Max. Head: 350 ft. at 400 ...more
400 GPM @ 375' TDH, Krebs #MM100, MillMAX Slurry Pump, 4" inlet, 3" outlet, 50 HP
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM100
400 GPM @ 375 ft. head (approx.).Model: MM100.Inlet: 4 in.Outlet: 3 in.Driven by 50 HP motor.Fully guarded. Please contact us for more information..
400-1500 GPM, Warman, GP Series Slurry Pump, 4" inlet x 4" discharge, rubber lined, 0-60 psi, size 100, motor base
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Warman
GP Series Size: 100Frame: "C" Rubber Lined Fiber Reinforced Resin Outer Casing 4 in. Dia. Flanged Inlet and Discharge Flow Range: 400 - 1500 GPM 0 - 60 PSI Comes with Overhead Motor Base, View Spec Sheet Below, Located: British Columbia, Canada.
JUST ADDED!
450 GPM @ 141' TDH, Goulds #6096, Horizontal Slurry Pump, 13.5" impeller diameter, 1200 RPM, 75 HP Teco-Westinghouse motor, 575 Volts, 3PH
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Goulds
Model: 6096
SKU: 158116, Model: 6096, Condition: Used, Horsepower: 75 hp, GPM: 450, Head: 141 ft, RPM: 1200 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 78.00 (H) x 36.00 (W) x 71.00 (L) inches, Additional :, Size: 12x10-25, Pump Type: Horizontal centrifugal slurry/process pump, Capacity: 450 GPM, Head: 141 ...more
500 GPM @ 110' TDH, ASH Pump Envirotech #A-6-5, Slurry Pump, 47 psi, 4" suction x 3" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Ash
Model: A-6-5
Type A-6-5. Size: 4 x 3.150 - 500 gpm.Head up to 110 feet (47 psi.). Comes with overhead motor base., View Spec Sheet Below Shipping information:, Dimensions (L x W x H): 36 in. x 22 in. x 38 in.91 cm x 56 cm x 97 cm. Please contact us for more information..
600 GPM @ 120' TDH, Toyo #DBH-150/125, Slurry Pump, 6" suction x 5" discharge, 1250 RPM, 15.7" impeller diameter, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Toyo
Model: DBH-150/125
Flow: 600 USGPMSpeed: 1250 RPMHead: 120 ft. Max Soild Size: 1.25 in.Impeller: Steel 15.7 in. Dia.Qty: 2Location: British Columbia, Canada.
770 GPM @ 340' TDH, Goulds #5500, severe duty slurry pump, Carbon Steel, 250 psi @ 70°F, B4 frame, 4x6-29, 27.5" imp diameter
Equipment Recovery Corp | Willoughby, OH
Category: Slurry Pumps
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Goulds
Model: 5500
Contact us directly for a freight quote or you can setup your own freight. Please provide ship to address. Loading is included with the sale of the item., Goulds 5500.
770 GPM @ 340' TDH, Goulds #5500.B4.4X6-29, severe duty slurry pump, 4" top inlet/outlet, 8" side inlet/outlet
Equipment Recovery Corp | Willoughby, OH
Category: Slurry Pumps
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Goulds
Model: 5500.B4.4X6-29
GOULDS PUMPS 5500.B4.4X6-29.
900 GPM @ 240' TDH, Worthington #M3-183, Slurry Pump, 4" inlet x 3" discharge, hard metal wear plates & impeller, (3 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Worthington
Model: M3
Size: 4 in. x 3 in.Model: M3-183Hard metal wear plates and impeller.Approx. 350 GPM @ 300 ft. head.Approx. 900 GPM @ 240 ft. head.3 units available.
JUST ADDED!
1020 GPM @ 240' TDH, Warman #6/4-AH, Horizontal Centrifugal Slurry Pump, 6" suction x 4" discharge, 50 HP, 1770 RPM, 575 V., 3PH
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Warman
Model: 6/4-AH
SKU: 157294, Model: 6/4 AH, Condition: Used, Horsepower: 50 hp, GPM: 1020, Head: 240 ft., RPM: 1770 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 30.00 (H) x 63.00 (W) x 60.00 (L) inches, Additional :, Suction Inlet: 6", Discharge Outlet: 4", Pump Type: Centrifugal, Max. Head: 240 ft. at ...more
1200 GPM @ 25' TDH, Galigher #4VRA1000, Centrifugal Slurry Pump, 25-30 HP, 6" suction x 4" discharge, 75 psi, rubber lined, 208-230/460 Volts, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Galigher
Model: 4VRA1000
6in x 4in Galigher Centrifugal Pumps, Qty: 2 Units, Make: GaligherModel: 4VRA1000Suction: 6inDischarge: 4inCondition: Used, Reported in Excellent ConditionLiners: Rubber Lined Approx. 400 Hours Since NewFlow Rate: 600-1200 GPMHead: 25ftMax Working Pressure: 75 PSI, View Spec Sheet Below, Drive: Baldor or Toshiba ...more
1400 GPM @ 80' TDH, Lawrence #KA01-06-EE92381, vertical cantilever submersible slurry pump
Deal Makers Machinery | Thousand Oaks, CA
Category: Slurry Pumps
Seller: Deal Makers Machinery
Location: THOUSAND OAKS, CA
Mfr: Lawrence
Model: KA01-06-EE92381
JUST ADDED!
1,839 GPM @ 55' TDH, Goulds #SRL-XT, Slurry Pump, rubber lined, 1200 RPM, 75 HP Teco-Westinghouse motor, 575 Volts, 3PH
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Goulds
Model: SRL-XT
SKU: 158115, Model: SRL-XT, Condition: Used, Horsepower: 75 hp, GPM: 1839, Head: 55.8 ft, RPM: 1200 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 66.00 (H) x 43.00 (W) x 77.00 (L) inches, Additional :, Pump Size: 8x8-25, Pump Type: Horizontal centrifugal slurry pump, Service: Cyclone Feed Pump No. ...more
2000 GPM @ 350' TDH, Krebs #MM200, MillMAX Slurry Pump, 8" suction x 6" discharge, 100 HP
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM200
2000 GPM @ 350 ft. head (approx.).Model: MM200.Inlet: 8 in.Outlet: 6 in.Driven by 100 HP motor.Fully guarded. Please contact us for more information..
2000 GPM @ 375' TDH, Krebs #MM200, Slurry Pump, 8" inlet, 6" outlet
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM200
Model MM2002000 GPM @ 375 ft. head (approx.).Model: MM200.Inlet: 8 in.Outlet: 6 in. No MotorLocation: Eastern USA.
2000 GPM @ 375' TDH, Krebs #MM200, MillMAX Slurry Pump, 8" suction x 6" discharge, 75 HP, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM200
Condition: Used2000 GPM @ 375 ft. head (approx.).Model: MM200.Inlet: 8 in.Outlet: 6 in.Driven by 75 HP motor.Fully guarded. Please contact us for more information..
2400 GPM @ 92' TDH, Eliminator #SBLH8S150-6T5, Slurry Pump, 150 HP
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Eliminator
Model: SBLH8S150-6T5
SKU: 142973, Model: SBLH8S150-6T5, Condition: Used, S/N: 2931, Horsepower: 150 hp, GPM: 2400, Head: 92 FT, Electrical :, Voltage: 575 volts, Phase: 3-phase, Made In: UNITED STATES, Dimensions: 36.00 (H) x 60.00 (W) x 96.00 (L) inches.
3784 GPM @ 243' TDH, Warman #5800-600-1200, Submersible Slurry Pump, 33 m @ 1.0 S.P. Submergence, 306 HP, 1192 RPM, 4000 V, 2012
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Warman
Model: 5800-600-1200
Year: 2012
SKU: 114733, Model: 5800-600-1200, Year: 2012, Condition: Used, Horsepower: 306 hp, GPM: 3784, Head: 74m, RPM: 1192 rpm, Electrical :, Voltage: 4000 volts, Phase: 3-phase, Additional :, s:, - Twin-volute design casings., - No external cooling for the motor is required., - Seal is subjected to submergence pressure ...more
3800 GPM @ 240' TDH, Metso #HM200, Slurry Pump, metal lined, 8" suction x 6" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Metso
Model: HM 200
3800 GPM @ 240 ft. head (approx.).Metal lined.Model: HM 200.Inlet: 8 in. (200 mm).Outlet: 6 in. (150 mm).Bare pump only..
8,937 GPM @ 118' TDH, Caterpillar, Diesel-Powered Dredging Slurry/Booster Pump, 16" suction x 16" discharge, 750 HP, 1800 RPM
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Caterpillar
Model: 3412
Discharge: 2030 cum/hrHead: 36 m (118 ft.)Suction Pipe Diameter: 390 mm (16 in.)Discharge Pipe Diameter: 390 mm (16 in.)Unit Dimensions Approx.Length: 6.0 m (19 ft. 8 in.)Width: 2.2 m (7 ft. 2 in.)Height: 3.2 m (10ft. 5 in.)Pump EngineModel: Caterpillar 3412Power: 560 kW (750 HP)1800 RPMStarting: Battery Cooling: Heat ...more
ASH Pump Envirotech, Centrifugal Slurry Pump, 2" suction x 2" discharge, 1-1/4" shaft
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: A-S-H - Envirotech
ASH 2in x 2in Slurry Pump, Make: A-S-H - EnvirotechType: Centrifugal Slurry PumpCondition: Used ConditionSize: 2in x 2inSuction Inlet: 2in Dia. Mounting Holes: 4.5in Center to CenterDischarge Outlet: 2in Dia.Shaft: 1.25in Dia., Overall Dimensions:, Length: 27inWidth: 16inHeight: 20in, Location: Savona, British ...more
ASH Pump Envirotech #D-6-5, Slurry Pump, 14" suction x 12" discharge, rubber lined, new rubber impeller
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: A-S-H Pump Envirotech
Model: D-6-5
Manufacturer: A-S-H Pump EnvirotechPump Type: D-6-5Style: ASH Slurry PumpLiners: Rubber LinedImpeller: New Rubber ImpellerSuction: 14in DiameterDischarge: 12in DiameterOverhead Motor Mount, Location: Western Canada.
JUST ADDED!
4" Andritz, Slurry Pump, sludge
Sterling Pump Systems | Highland, MI
Category: Slurry Pumps
Seller: Sterling Pump Systems
Location: Highland, MI
Mfr: Andritz
Sludge slurry pump, 4" Andritz, WITH 2 YEARS WARRANTY.
ASH Pump Envirotech, SRH Slurry Pump, 5" suction x 4" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Ash
Completed with: OHMBGuardMech SealLocation: Western USA.
Ash Pump with 100 HP (74 kW) motor, Type B-6-6, (3 available) units
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Ash
Type B-6-6 Ash Pumps with 100 HP (74 kW) motor, - Three units available..
ASH Pump Envirotech, Rubber-Line Slurry Pump, 4" suction x 3" discharge, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Ash
Inlet: 4 in.Outlet: 3 in.Rubber lined.With OHMB.Quantity: 2.(1 pump includes guard).Location: Central, USA.Contact for more information., View more Slurry Pumps.
ASH Pump Envirotech, SRC Centriseal Slurry Pump, 2-1/2" suction x 2" discharge, 7.5 HP, 575 V., 1755 RPM
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Ash
Suction: 2.5 in. Discharge: 2 in.Rubber LinedWater Pump Packing Overhead Motor BasePump Type: 2.5x2 SRC Centriseal Motor and Drive Reliance 7.5 HP Motor 575 Volt 1755 RPMLocation: British Columbia, Canada.
JUST ADDED!
Aurora, Slurry Pump, 6" x 6" x 12", recessed impeller, sludge and solids
Sterling Pump Systems | Highland, MI
Category: Slurry Pumps
Seller: Sterling Pump Systems
Location: Highland, MI
Mfr: Aurora
WITH 2 YEARS WARRANTY.
Denver, Slurry Pump, 15 HP, 1760 RPM, 550 V., 3PH, 1760 RPM, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Denver
Electric Motor15 HP550 Volt60 Hz3 PhaseRPM: 1760Frame: 284U2 Units AvailableLocation: British Columbia, Canada.
JUST ADDED!
Denver Orion, Centrifugal Slurry Pump, 14" inlet x 12" outlet, F frame, (2 available)
Machinery Scene | Toledo, WA
Category: Slurry Pumps
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Denver Orion
Denver Orion pump 14” x 12”, 14 inch inlet x 12 inch outlet, Frame: F, 350mm x 300mm, Two pumps available, Several run tested electric motors available with video, Stored inside, Contact us for a pricing and freight rate..
Dynapro #HDSP-10X8-27, Centrifugal Slurry Pump, 27" diameter impeller, 10" suction x 8" discharge, (2 available)
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Dynapro
Model: HDSP 10X8-27
Dynapro 10in x 8in HDSP Slurry Pump, Make: DynaproModel: HDSP 10X8-27Type: Centrifugal Slurry PumpCondition: Used ConditionSize: 10x8Suction Inlet: 10in Dia.Discharge Outlet: 8in Dia.Impeller: 27in Dia., Location: Eastern Canada.
JUST ADDED!
Dynapro Equipment #SRL-C, Rubber Lined Slurry Pump, 5" suction x 4" discharge, rubber impeller & liner, packing seal, 15 HP General Electric, 1775 RPM, 575 V., 2014
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Dynapro Equipment
Model: SRL-C
Year: 2014
SKU: 156734, Model: SRL-C, Year: 2014, Condition: Used, S/N: 514600-A, Horsepower: 15 hp, RPM: 1775 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 52.00 (H) x 30.00 (W) x 48.00 (L) inches, Additional :, Pump, - Nominal Suction: 5 in, - Nominal Discharge: 4 in, - Impeller Material: Rubber, - Liner ...more
FLSmidth #Krebs-RM250 millMAX Slurry Pump, stored indoors, rebuilt
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Flsmidth
Model: KREBS-RM250
FLSmidth Krebs RM250 millMAX Slurry Pump-Rebuilt pump in good condition, - Bare pump, - Stored indoors, - Immediately available, millMAX Design which includes:, -Increased wear life, -Lower power consumption, -Increased mill throughput, -More consistent hydrocyclone separations, -Reduced cost-per-ton pumped, -Great ...more
JUST ADDED!
FLSmidth Krebs #MM300-C42U, millMAX Slurry Pump, 12" inlet, 10" outlet, 75 HP Toshiba motor, 32" pump sheave, 8" motor sheave, 460/380 V.
Machinery Scene | Toledo, WA
Category: Slurry Pumps
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Flsmidth Krebs
Model: MM300-C42U
FLSmidth Krebs millmax pump, mm300-c42u, 75 hp, Inlet: 12”+-, Outlet: 10”+-, Model: MM300-C42U, Serial # K 0489, Toshiba 75HP, 460 or 380 volt, Sheave size: Pump 32”+- Motor 8”+-.
Furukawa #SPF-2Stage, High Pressure Slurry Pump, 2-1/2" suction x 2" discharge
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Furukawa
Model: SPF 2 STAGE
Used Furukawa Slurry Pump.Model: SPF 2 Stage.2.5 in x 2 in.High Pressure.1 complete pump available..
Galigher Style Series 1000, vertical slurry pump, totally sealed bearings, bottom box & top plate coated in vulcanized rubber, new
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Galigher
Model: 1000
- Galigher Style pumps interchangeable with Series 1000, - Totally sealed bearings, - Bottom box and top plate coated in vulcanized rubber, - Semi-open impeller coated with abrasion-resistant polyurethane, - 4140 steel shaft, Belt guards, - Supplied with one coat primer and two coats machine enamel, - Motors, sheaves ...more
Galigher Style Series 5000, vertical slurry sump pump, natural rubber wear parts, heavy duty bearing assembly, new
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Galigher
Model: 5000
- Galigher style vertical sump pump, - Interchangeable with original Galigher pumps, - 5,000 series heavy duty pumps, - Natural rubber wear parts, - Heavy duty bearing assembly and mechanical components, - Belt guard and motor baseplate, - Discharge pipe, - Pulley, motor, and belts available separately, - Made in ...more
Goulds #5500, 8 x 10 slurry pump, 400 HP, 1785 RPM, 460 V.
Equipment Recovery Corp | Willoughby, OH
Category: Slurry Pumps
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Goulds
Model: 5500
GOULDS 5500 8X10.
JUST ADDED!
Goulds #SRL-C, Rubber-Lined Slurry Pump, 17" impeller diameter, 1200 RPM, 75 HP Teco-Westinghouse motor, 575 Volts, 3PH
Lenmark Industries | Langley, BC
Category: Slurry Pumps
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Goulds
Model: SRL-C
SKU: 158117, Condition: Used, Horsepower: 75 hp, RPM: 1200 rpm, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 79.00 (H) x 50.00 (W) x 87.00 (L) inches, Additional :, Pump Manufacturer: Goulds Pumps, Inc., Pump Model: SRL-C, Pump Size: 8 x 8-25, Pump Type: Horizontal centrifugal slurry pump, Impeller ...more
Krebs #D6B-12-838 Cyclone, (8 available) units
D'Angelo International | Bellingham, WA
Category: Slurry Pumps
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Krebs
Model: D6B-12-838
3 units available, SPARE PARTS (Additional Cost):, - 4 each - Inlet Head Liners, - 4 each - Liner Top Cover Plate, - 4 each - Cylinder Liner, - 4 each - Skirt - Urethane, - 4 each - Apex Insert, - 4 each - Urethane Skirt, - 10 each - Inlet Adapter, - 10 each - O Flow Adapter, - 3 each - Inlet FLGD Adapter, - 4 each - ...more
Krebs #MM150, Slurry Pump
Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
Mfr: Krebs
Model: MM150
MM 150No MotorMotor MountLocation: Eastern USA.
