42 Results
16" width x 36" D x 24" H Custom Compactors Corp, Baler, Hydraulic
Machinery & Equipment Co | Brisbane, CA
Category: Downstroke (Vertical) Balers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Custom Compactors Corp
Custom Compactors Convenience-Pac Baler. Hydraulic baler measuring 24" x 16" x 36". Mounted on a stand for ease of use. Serial number unavailable., Basis: FOB.
30" width x 60" D x 48" H Harmony #S60-XDRC, vertical baler, 20 HP, rear feed, 7" cylinder, 64" penetration
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Harmony
Model: S60-XDRC
HARMONY S60-XDRC VERTICAL BALER -- 60" Vertical baler -- Rear Feed -- 20 HP motor -- 7" Cylinder -- 64" Penetration -- 92,360 Lbs of force -- Bale size 30" x 60" x 48" -- Loaded on your truck! -- NOTE: No conveyor.
30" width x 60" D x 48" H Harmony #S60XDC, vertical baler, 20 HP, 25" x 60" feed opening, 7" cylinder
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Harmony
Model: S60XDC
HARMONY S60-XDRC Vertical Baler: -- Motor: 20 HP. -- Bale Size: 30";x 60"; ≤ 48";. -- Bale Weight (OCC): Up to 1,000 Lbs. -- Feed Opening: 25″ x 60″. -- Ram Force: 92,360 Lbs. -- Volume: X-Large 7" cylinder. -- Loaded onto your Truck! -- Please ask me about a reconditioned price!.
30" width x 60" D x 51" H Harmony #M60STD, vertical baler, 10 HP, 6" bore x 48" stroke cylinder, 4" rod, 12 GPM pump
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Harmony
Model: M60STD
HARMONY M60STD Vertical Baler:Bale size: 30 inches x 60 inches x 51 inchesCylinder: -- 6 inch bore (152 mm). -- 4 inch rod (102 mm). -- 48 inch stroke (1,219 mm). -- 10 horsepower motorPump: -- 12 gallons per minute.
JUST ADDED!
34" width x 19" D x 50" H Novapac #C-2448, chain type vertical baler, 7.5 HP, 550 V., 3 Ph., 60 Hz.
MachineCo | Montreal, QC
Category: Downstroke (Vertical) Balers
Seller: MachineCo
Location: Montreal, QC
Model: C-2448
“Normal wear from use.”, Novapac BalerChain typeModel C-2448Motor:7.5HPElectrics:550V/3ph/60Capacity:34” L-R19” F-B50” HVariable pressure switchFootprint: 28”x8’, Only $3,499.00 USD! Sold as is, shipping not included. Loaded, FOB Mtl, Call us today for any questions you have! ...more
Get email updates for newly added Downstroke (Vertical) Balers
Downstroke (vertical) balers (also known as vertical compactors or downstroke compactors) are baling machines that compress materials vertically, using a downward force to create compact bales. They are commonly used for baling cardboard, plastic, and other recyclables in retail, industrial, and commercial settings with limited floor space.
40" width x 58" D x 40" H Compactors #V64XHD, Vertical Baler, 10 HP, 2019
GTH Used Machinery Intl | Pico Rivera, CA
Category: Downstroke (Vertical) Balers
Seller: GTH Used Machinery Intl
Location: Pico Rivera, CA
Mfr: Compactors
Model: V64XHD
Year: 2019
Compactors Inc. Vertical Hydraulic Baler, Model: V64XHD, Serial Number: V64XHD9830, Manufacture Date: February 2019, Normal Bale Size: 40 W x 58 D x 40 H, Electrical :, 208 Volt 3Ph, 30 Full Load Amps, 10 HP Motor, Hydraulic System:, 10 HP Hydraulic Power Unit, 40 Gallon Hydraulic Reservoir, Model HE100168-14A ...more
42" width x 30" L x 48" H Cram-A-Lot #VB-42-B, Vertical Baler
Harris Machine Tools, Inc. | Houston, TX
Category: Downstroke (Vertical) Balers
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Cram-A-Lot
Model: VB-42-B
Standard s include:, Made in the USA, ANSI Z245.5 Compliant, Key Operated Controls, Quiet Operating Vane Pump, Gas Spring Assisted Loading Door, Electro-Magnet Safety Lock, Side Mounted Power Unit, Patented Bale Eject System, UHMW Ram Guides.
60" width x 30" D x 48" H PTR #2300HD, vertical baler, 10 HP, 6" cylinder, up to 1000 lb. OCC (2 available)
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ptr
Model: 2300HD
PTR 2300HD VERTICAL BALER: -- 10 HP Motor. -- 6" Cylinder. -- Bale Size 60" x 30" x 48". -- Capacity up to 1,000 Lbs. OCC. -- Loaded on your TruckTwo available at this price.
60" width x 30" D x 48" H PTR #3400HD, heavy duty vertical cardboard baler, 10 HP, 460 V., 3-Phase, Recycling
CAD Associates Industrial Surplus | Green Brook Township, NJ
Category: Downstroke (Vertical) Balers
Seller: CAD Associates Industrial Surplus
Location: central NJ, NJ
Mfr: Ptr
Model: 3400HD
We have a great working Cardboard baler located in Central NJ (Kearny). We can load your truck., This is a heavy-duty PTR Model 3400HD Vertical Hydraulic Baler. Ideal for compressing cardboard (OCC), plastics, and other recyclable materials in warehouse, retail, or industrial environments., Brand: PTR Baler & ...more
JUST ADDED!
60" width x 30" D x 48" H BACE #V630CC, vertical baler, 10 HP, 50 cu. ft. bale, 1,000 lb. OCC, 56,548 lb. force, 6 tie slots, 2009
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Model: V630CC
Year: 2009
BACER VERTICAL BALER MODEL V630CC -- Nominal bale size 60" x 30" x 48" -- Bale weight up to 1,000 Lbs OCC -- Bale volume 50 cu.ft -- 6 Bale tie slots -- Compact force 56,548 Lbs -- 10 HP motor.
60" width x 30" D x 48" H Nicholas #VB-60-B, hydraulic vertical baler, 24" feed open, 50 cu.ft., 9 GPM, Control panel w/ emergency stop
Sterling Machinery Exchange | South El Monte, CA
Category: Downstroke (Vertical) Balers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Model: VB-60-B
Bale Size (W x D x H) 60" x 30" x 48" Feed Opening Height 24" Bale Volume 50 Cubic Feet Bale Weight 1,100 Lbs. Platen Force 59,370 Lbs. Pump @ 1800 RPM 9 gpm Horsepower 10 H.P. Voltage 208-230/460V ~ 3 Phase Dimensios (W x D x H) 80" x 42" x 144" S: Control Panel With Emergency Stop Electro-Magnetic Door Interlock ...more
72" width x 30" D x 30" H Harmony/Heco #M72, Low Profile Vertical Baler, 460 V
Arlington Machinery | Lake Zurich, IL
Category: Downstroke (Vertical) Balers
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Harmony
Model: M72
Used 72" Wide Harmony/Heco Low Profile Vertical Baler Model: M72AD 5 HP Motor Rebuild Hydraulic Pump 460/3/60 Approximate Bale Size 72" x 30" x 30" Approximate Dimensions: 96" L x 40" W x 90" H Unit Has Not Been Tested At Arlington, Currently Quoted AS-IS, Contact Your Arlington Sales Rep for testing For Testing ...more
72" width x 42" D x 48" H JV Manufacturing #VB-72-H-DC, deep chamber vertical baler, 15 HP, 7" cylinder, 52" stroke, reconditioned
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Jv Manufacturing
Model: VB-72-H-DC
JV MANUFACTURING VB-72-H-DC VERTICAL BALER: -- Deep Chamber Vertical Baler. -- 15 HP Motor. -- 7" Cylinder. -- 52" Stroke. -- Bale 72" x 42" x 48". -- Loaded on your truck.
75" width x 47" D x 148" H Harris Selco #VNF-5, Vertical Baler, 8" cylinder, 2008
Shanked Computer Recycling | Acheson, AB
Category: Downstroke (Vertical) Balers
Seller: Shanked Computer Recycling
Location: Acheson, AB
Mfr: Harris Selco
Model: VNF5
Year: 2008
Model: VNF-5 Year: 2008 purchased, Harris/Selco® VNF5 is specifically designed to bale non-ferrous materials. This rugged, easy to operate baler, with a heavy duty, long stroke, 8" cylinder, produces dense marketable bales time after time., https://carrindustrial.com/harris-equipment/vnf5-vertical-baler/ ...more
JUST ADDED!
22" x 42" x 30" Harmony #M-42BC, low profile vertical baler, 25,134 lb. ram force, 2 HP, 1,725 RPM, 180 lb. bale, 11 sec. cycle
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Harmony
Model: M-42BC
Harmony M42BC Low Profile Vertical BalerThe M42BC stockroom baler is a combination of both strength and power designed into a smaller operational footprint. This dynamic "plug and play" baler on casters is the choice of small retailers, pharmacies, grocers, and small businesses with stockroom space concerns and needs ...more
JUST ADDED!
46" x 24" x 30" PTR #460, vertical baler, 30,780 lb. force, 3 HP, 32-3/4" feed height, 500 lb. bale, 2,450 psi, 2016
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ptr
Model: 460
Year: 2016
PTR 460 Vertical Baler (Downstroke)This small but powerful machine has been specifically engineered for applications with limited space or budget. The 460 series has all of the important safety s that make us the leader in the vertical baler industry.: -- Cylinder Bore 4" [10 cm]. -- Cylinder Rod 2 1/2" [ 6 cm]. -- ...more
JUST ADDED!
24" x 29" x 42" Harmony Enterprises #M30STD, Vertical Baler, 2 HP, 1740 RPM, 5 KVA, 30 A, 115/230 V., 1 Ph., 2025 (2 available)
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Harmony Enterprises
Model: M30STD
Year: 2025
2 HP, 1740 RPM, 5 KVA, 30 AMP.
60" x 30" x 49" JV #VB-60B, Vertical Baler, 29.7 ton platen force, 1000 lb. max. bale, 52" load height, 44" cylinder stroke, 6" cylinder diameter, 10 HP, 208 Volt, 2007
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Jv Manufacturing
Model: VB-60-B
Year: 2007
JV MODEL VB-60B Vertical Baler: -- Bail size: 60" x 30" x 49" -- Bale weight (up to): 1,000 Lbs -- Cylinder: 6" -- Cylinder stroke: 44" -- Feed opening height: 24" -- Load height: 52" -- Main motor: 10 HP -- Platen force: 59,370 Lbs -- Platen face pressure: 45 PSI -- Average cycle time: 53 secLOADED ON YOUR TRUCK.
60" x 30" x 48" Max-Pak #MP-60-HD, Vertical Baler, 1000 lb. bale, 54" load height, 40.9 psi platen pressure, 15 HP, ejector system, 480 Volts, 3PH
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Max-Pak
Model: MP 60 HD-15
MAX-PAK MP 60 HD-15 Vertical Baler: -- 15 HP Motor --Nominal Bale Size 60" x 30" x 48" --Bale Weight Up to 1000 Lbs OCC --Platen Pressure 40.91 PSI --Average Cycle Time 49 Seconds --Loading Height 54-1/2" --Ejector System Semi-Automatic --Full Bale Switch Standard.
JUST ADDED!
30" x 60" Harmony #M60MD, Low Profile Vertical Baler, 95-3/4" operating height, 5 HP, 57,805 lb. ram force, 33 sec. cycle
Machinery Scene | Toledo, WA
Category: Downstroke (Vertical) Balers
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Harmony
Model: M60MD
Harmony M60MD Vertical Baler low profile 8ft tall, Operates under an 8 ft ceiling height 95 ¾”, Made In USA., 5 hp, The door has been re-painted June 2021, Serial# 1989, Product, Bale Size: 30″ x 60″ x up to 30″ High (762 mm x 1524 mm up to 762 mm)Estimated Bale Weight (Corrugated ...more
Premier Tech #600, 4-Station Vertical Compression Baler, 69" x 78" holding bin, 11" x 17" finished bag size, 10.5" x 16.5" tube size, 25 HP, 1995
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Premier Tech
Model: EM-600
Year: 1995
PREMIER TECH - 600: 4-Station Vertical Compression Baler Specially designed to compress: Wood Shaving; peat moss; fiber cellulose, etc. --Complete with: Automatic Bag Feeder & Automatic Plastic Bag Closing & Sealing (stapler type closing). -- Height of tubes: 96". -- Motor: 25 HP. -- Tube size: 10-1/2" x ...more
JUST ADDED!
20" x 30" x 37-1/2" Bramidan #B4, Vertical Baler, 1 HP, 1700 RPM, 10 A, 115 V., 2022
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Bramidan
Model: B4
Year: 2022
1700 RPM, 10 A, 1 HP.
JUST ADDED!
20" x 30" x 37-1/2" Bramidan #B4, Vertical Baler, 1 HP, 1700 RPM, 10 A, 115 V.
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Bramidan
Model: B4
1700 RPM, 10 A, 1 HP.
Enerpat #VB-TY, Scrap Tire Baler, 100 - 180 ton press force, 1-1.2 TPH, up to 100 tires/bale
Enerpat | Central Ohio, OH
Category: Downstroke (Vertical) Balers
Seller: Enerpat
Location: Los Angeles, CA
Mfr: Enerpat
Model: VB-TY
Year: 2026
ENERPAT Scrap Tire Baler Efficient Solution for Used Tire Collection and Compaction - Compact up to 100 scrap tires into one bale and save up to 85% storage space., The ENERPAT Scrap Tire Baler is designed to efficiently compress used tires into compact, high-density bales, helping recyclers significantly reduce ...more
JUST ADDED!
General Hydraulics #615-60R-21, Vertical Baler, 230 Volts, 3PH
Heavy Wall Consulting | Long Beach, CA
Category: Downstroke (Vertical) Balers
Seller: Heavy Wall Consulting
Location: Los Angeles, CA
Mfr: General Hydraulics
Model: 615-60R-21
Vertical hydraulic baler built for compacting cardboard, plastics, and other recyclable materials into dense, manageable bales for shops, warehouses, and distribution facilities. Gated chamber design allows safe, contained loading while the hydraulic ram compresses material for efficient volume reduction, cutting down ...more
72" x 32" GPI, Downstroke Vertical Baler
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Gpi
NO NAME TAG.
JUST ADDED!
20" x 40" GPI Divison #M42BC, baler, 1-1/2 HP, 3450 RPM
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Gpi Divison
Model: M42BC
17.8/9.0-8.9 A, 3450 RPM, 1 1/2 HP.
30" x 60" Gpi Divison #M60MD, Vertical Baler, 5 HP, 3450 RPM, 3 phase, 208-230/460 V.
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Gpi Divison
Model: M60MD
5 HP, 3450 RPM.
JUST ADDED!
International Dynetics #Slugger, Drum Compactor, 1 HP, 104/208 V.
Federal Equipment Company | Cleveland, OH
Category: Downstroke (Vertical) Balers
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: International Dynetics
Model: SLUGGER
Used International Dynetics Corporation drum compactor, model slugger, 1 hp, 104/208 volt motor, serial# HSCDEE-10239.
46" x 24" JV Manufacturing #DL-46-LD-VB, vertical baler, 230/460 V., 2002
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Jv Manufacturing
Model: DL-46-LD-VB
Year: 2002
3 HP, 1725 RPM, MADE IN USA.
Marathon #4224, vertical baler, 42" x 24" opening, 1.5 HP, reconditioned
Breakthru Surplus | Waukesha, WI
Category: Downstroke (Vertical) Balers
Seller: Breakthru Surplus
Location: Waukesha, WI
Mfr: Marathon
Model: 4224
Vertical Baler, Model: 4224, Serial #: 2037398, Single-phase, 110V or 230V power., Perfect for businesses needing to compact large volumes of cardboard for efficient recycling..
JUST ADDED!
Mil-Tek #2509, Baler, 160 PSI, 2022
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Mil-Tek
Model: 2509
Year: 2022
160 PSI, MADE IN DENMARK.
JUST ADDED!
35" x 28" x 54" Mil-Tek #BP-306, Vertical Baler, 160 PSI., 2011
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Mil-Tek
Model: BP 306
Year: 2011
160 PSI, MADE IN DENMARK.
JUST ADDED!
Philadelphia Tramrail, Vertical Baler, hydraulic, 30-40 amps, 1990
Machinery & Equipment Co | Brisbane, CA
Category: Downstroke (Vertical) Balers
Seller: Machinery & Equipment Co
Location: Chowchilla, CA
Mfr: Philadelphia Tramrail
Year: 1990
Philadelphia Tramrail vertical hydraulic baler, Serial No. 60001HD, manufactured in 1990. Heavy-duty vertical compression design for compacting cardboard, paper, packaging material, and other recyclable materials into tied bales. Unit s a hydraulic ram with large vertical cylinder, hydraulic power unit mounted at the ...more
60" x 30" x 48" PTR #2300HD, Vertical Baler, 6" cylinder, 60" x 27" load opening, 10 HP, 480 Volt
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ptr
Model: 2300HD
PTR - 2300HD: Vertical Baler -- 10 HP Motor. -- 6" Cylinder. -- Load opening: 60" x 27". -- Bale size: 60" x 30" x 48". -- Bale weight: 850 - 1,100 Lbs. -- Loaded onto your truck.
30" x 60" x 44" Selco Products #VT-5, vertical baler, 10 HP, 1725 RPM
HGR24 | Euclid, OH
Category: Downstroke (Vertical) Balers
Seller: HGR24
Location: Euclid, OH
Mfr: Selco Products
Model: VT-5
MANUAL, 10 HP, 1725 RPM, 28-28/13 A, MADE IN USA.
Universal Handling Equipment #CTC242436, Vertical Hydraulic Baler - 1 Cu. Yd - 5 HP - 600 Volts, 3PH - Industrial Cardboard & Plastic Baler
Lenmark Industries | Langley, BC
Category: Downstroke (Vertical) Balers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Universal Handling Equipment
Model: CTC242436
SKU: 145301, Model: CTC242436, Condition: Used, Horsepower: 5 hp, Electrical :, Voltage: 575 volts, Dimensions: 37.00 (H) x 33.00 (W) x 91.00 (L) inches, Additional :, - Type: Vertical Hydraulic Baler, - Application: Cardboard, plastic, cans, recyclables, Capacity, - Chamber Size: Approx. 1 Cubic Yard, Electrical, - ...more
23" x 23" x 21" Paco-Pak #900, top loading baler, 1.5 HP, 115/230 V., 1-phase, key start, 1980s
MachineCo | Montreal, QC
Category: Downstroke (Vertical) Balers
Seller: MachineCo
Location: Montreal, QC
Model: 900
Model 900, Serial No. 15372, Capacity: 23″ x 23″ x 21″, Electric power, 115V/230V/1ph, 1.5 HP, Modern. 1980’s, This machine is completely self-contained within modern housing, It has a key start control to prevent unauthorized operations, Model 900, Serial No. 15372, Capacity: 23″ x ...more
Granville #Bacca-Baler, vertical baling system, 60" chamber, 10 HP, 575 V., 3-ph, w/ incline & cross conveyors, 2024
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Model: BACCA-BALER
Year: 2024
GRANVILLE: Bast Fiber Baling System (Granville Tobacco "BACCA" Baler)Received NEW January 9, 2023; hours used since purchase = 0. -- Overall system weight for shipping: 10,000 Lbs Integrated.System consists of: -- (2) TBB (Tall BACCA Baler) with: 60"; Chamber. -- (2) BACCA Baler Scales. -- 1PU Electric power unit for ...more
Wastequip #D-600, vertical compactor, 27" x 48" feed opening, 28300 lb. ram force, 3 HP, 16" ram stroke, 18" penetration, 20 sec. cycle, 2021
Ex-Factory | Charlotte, NC
Category: Downstroke (Vertical) Balers
Seller: Ex-Factory
Location: Charlotte, NC
Model: D-600
Year: 2021
WASTEQUIP ACCURATE D-600 Vertical Compactor: -- Feed opening: 27" x 48" -- Ram cylinder bore/rod: 4" / 2" -- Ram force: 28,300 Lbs -- Ram penetration: 18" -- Ram stroke: 16" -- Cycle time: 20 sec -- Main motor: 3 HP -- Front feed / Front pick-ups: -- Hydraulic power unit -- Full indicator light -- Easy operation ...more
Kilkom #K1-9, Baling Press/Trash Compactor
TNT Industrial | Orange, CA
Category: Downstroke (Vertical) Balers
Seller: TNT Industrial
Location: Orange, CA
Model: K1-9
The KILKOM Model K1-9 Baling Press/Trash Compactor designed by the brand Kilkom. This specific model, K1-9, is known for its sturdy construction and efficient pressing capabilities. Pe rfect for compacting trash or creating bales for easy disposal, this appliance is a practical addition to any kitchen or utility area. ...more
Vertical hydraulic downstroke baler
G-2000 | Toledo, OH
Category: Downstroke (Vertical) Balers
Seller: G-2000
Location: Toledo, OH
CATALOG NUMBER.:, SPEC.:37H22Z050CZ, HP.:15, VOLTAGE.:230/460, Machine Type.Vertical Baler Manufacturer.N/A Model.N/A Year.N/A Condition.Used.
