Machinery Values Inc
Harrison, NJ 07029-2059
Gold Level Dealer
Surplus Record Dealer Since 1997
Contact
Sales Dept.
About
Machinery Values, founded in 1971, is a family operated company with a 200,000 sq. ft. facility in Harrison, NJ. We have over 50 employees dedicated to serving our thousands of customers all over the world. Members of Machinery Dealers National Association for over 25 years, we subscribe to a high level of ethical standards. You can feel comfortable buying from us.Products & Services
- Boring Mills, Horz. & Vert.
- Broaching Machines
- CNC Machinery
- Drills
- Keyseaters
- Lathes
- Lathes, CNC
- Milling Machinery
Associations & Affiliations
518 listings in 124 categories
6 Ton, RMT #5VSG, air press, 1.5 stroke, 8" Shut Height, 1" ram adj., 7.5" throat, floor stand
Category: Air Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Rmt
Model: 5VSG
RMT AIR TOGGLE 6 TON PRESS BY FOREMOSTMODEL 5VSG… S/N A1314 TONNAGE @ 80 PSI. 6ADJUSTABLE STROKE AND SPM.1/4". 240 SPM.1/2". 220 SPM.3/4". 190 SPM.1". 135 SPM.1.5". 125 SPMSHUT HEIGHT. 8"RAM ADJUSTMENT. 1"THROAT DEPTH. 7-1/2"BED AREA. 14" X 9"RAM AREA. 5" ...more
Machinery Values Inc has 2 more
listings in Air Presses.
8" x 8" x 1" Roundo #R9S, hydraulic angle bending rolls, 29" roll diameter, 1982
Category: Angle Bending Rolls
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Roundo
Model: R9S
Year: 1982
8" X 8" X 1" ROUNDO… HYDRAULIC ANGLE BENDING ROLLMODEL R9S… S/N OD2732… NEW 1982 ROLL DIAMETER. 29" ANGLE IRON, LEG OUT. 8" X 8" X 1"MIN. DIAMETER. 125"ANGLE IRON, LEG IN. 8" X 8" X″/4"MIN. DIAMETER. 140" ANGLE IRON, SMALLEST ...more
16-1/2" width x 30" H x 16" D DeVlieg, cast iron angle plates, 6 t-slots
Category: Angle Plates
Seller: Machinery Values Inc
Location: Harrison, NJ
DEVLIEG 4-PIECE CAST IRON MATCHED ANGLE BLOCK SETS/N: A-91350… B-91350 :TOTAL HEIGHT.″0"TOTAL WIDTH. 16-1/2"TOTAL DEPTH. 16"TOP BLOCK. 16-1/2"W X 14"H X 14"DBOTTOM BLOCK. 16-1/2"W X 16"H X 16"DNUMBER OF T-SLOTS. 6APPROXIMATE WEIGHT. 1400 LBS :CAST IRON ...more
Machinery Values Inc has 1 more
listing in Angle Plates.
16 gauge x 8' Chicago #S-816, apron brake, 2 counterbalance arms
Category: Apron and Hand Brakes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Chicago
Model: S-816
CHICAGO DRIES… KRUMP 8' X 16 GA. APRON BRAKEMODEL S-816… S/N″13830 BENDING LENGTH. 96"THICKNESS CAPACITY. 16 Ga WEIGHT: 1,200 LBS.FLOOR SPACE: 143" x 27" x 55" :- 2 COUNTERBALANCE ARMS.
Edge Technologies #Minuteman-320SE, magazine bar loader, 9' 4" overall, 1.062" bar capacity, 6' bar length, 10" rack capacity, 2014
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Edge Technologies
Model: MINUTEMAN-320SE
Year: 2014
EDGE MINUTEMAN″20SE MAGAZINE BARFEEDNEW: 2014 :BAR DIAMETER CAPACITY. (3mm-26mm)0.118"-1.062"BAR LENGTH. 6'MINIMUN BAR LENGTH.″9.4"MAXIMUM REMNANT LENGTH. 16.5"MAGAZINE RACK CAPACITY. 10"APPROX. MACHINE WEIGHT. 1300 LBS. OVERALL LENGTH 9'4".
Machinery Values Inc has 13 more
listings in Bar Feeders and Loaders.
Bar, Pipe and Tube Straighteners
4 Results
8" x .041" Littell #308, 7-Roll Straightener, 2.25" diameter Rolls, 200 FPM, 2 HP, 1725 RPM, 440 V., 1963
Category: Bar, Pipe and Tube Straighteners
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Littell
Model: 308
Year: 1963
LITTELL MODEL″08 7-ROLL STRAIGHTENER*MODEL″08… S/N 71816-63… NEW 1963 Maximum width. 8"Straightening capacity. 8" x.041" mild steel 1" x.093" mild steelStraightening rolls. 7 (3 over 4)Dia. Of straightening rolls. 2.25" (on 2.75" centers)Dia. of entry pinch ...more
Machinery Values Inc has 3 more
listings in Bar, Pipe and Tube Straighteners.
Beading and Flanging Trimmers
1 Result
Roper Whitney Pexto #3617-C, beading machine, 18 gauge 13" throat, 3" cc, 40 RPM
Category: Beading and Flanging Trimmers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Roper Whitney
ROPER WHITNEY (PEXTO) Power Beading (Combination) MachineMODEL″617-C… S/N… 423-11-86… NEW 1986 Capacity, up to - 18 gaugeThroat depth - 13"Distance between centers -″"Roll speed - 40 R.P.M.Ratio gearing -″-1/2:1 :- Tooling (as shown)- Capability of being used with the ...more
Bed and Knee Milling Machines - Vertical
13 Results
Acer #EVS-3VK, vertical mill, 10" x50"tbl., 3 HP, 34" X, 16" Y, 5" Z, variable speed, R-8, Newall Topaz 2-Axis digital read out, power table feed, 2001
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Acer
Model: EVS-3VK
Year: 2001
ACER VERTICAL MILLING MACHINEMODEL: E-MILL″VK, S/N: N1020162, NEW: 2001 : TABLE SIZE. 10" X 50" LONGITUDINAL TABLE TRAVEL.″4" CROSS TRAVEL. 16" QUILL TRAVEL. 5" VERTICAL KNEE TRAVEL. 16" RAM TRAVEL. 20" INFINITELY VARIABLE SPEED RANGE. 60-4,500 RPM SPINDLE TAPER. R-8 ...more
Machinery Values Inc has 12 more
listings in Bed and Knee Milling Machines - Vertical.
37" x 60" Timesavers Lynx-7MWT-DB-60, 2-head belt grinder, air operated disc brake, 2017
Category: Belt Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Timesavers
Year: 2017
37" TIMESAVERS… "LYNX SERIES" "WET" TWO HEAD BELT GRINDER, "DEBURRING"……"FINISHING" 1st HEAD IS A GRINDING HEAD2nd HEAD BRUSH HEAD MODEL: LYNX″7MWT-DB-60… S/N:″3689… NEW:… 2017 :37" wide x 60" belt lengthDrum ...more
Blast Cleaning and Shot Peening Miscellaneous
1 Result
Cyclo Blast, sand blast cabinet, 32" Width 24" Height, 1979
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cyclo Blast
Year: 1979
CYCLO-BLAST SAND BLAST CABINET MODEL: PN-300281-3224-F… S/N: C-790103 32" L-R24" Width MADE IN BELMONT CALIFORNIA SPECIAL NOTE: Gentlemen, We are a long-time Cyclo-Blast dealer. in fact, we have a Model 4836F in our shop that we use for demos and shop blasting). Your machine looks exceptionally well ...more
Booth and Cabinet Blast Cleaning and Shot Peening
3 Results
28" width x 36" D x 30" H Media Blast #N200-3030, abrasive sand blast cabinet, cyclone sipon, 2020
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: N200-3030
Year: 2020
MediaBlast USA Made Model N-200″030 "Pressure Blast" Abrasive Blast Cabinet S/N: 7628919… New: 2020 The N-200 Cyclone dry, siphon blasting cabinet has the lowest abrasive usage of any machine design and is one of the most effective pieces of sandblasting equipment at controlling and recycling ...more
Machinery Values Inc has 2 more
listings in Booth and Cabinet Blast Cleaning and Shot Peening.
C Frame Hydraulic Press Machines (Gap Frame)
12 Results
3 Ton, Denison #W6A-3, Hydraulic C-Frame Press, 9" x 11-3/8" bed, 6" stroke, 12" daylight, 4-5/8" throat, 3/4 HP, 500-1222 operating psi, 230/460 Volt, 2012
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Denison
Model: W6A-3
Year: 2012
3 TON DENISON HYDRAULIC MULTI-PRESSMODEL W6A-3… S/N M6226… NEW 2012 CAPACITY.″ TONSSTROKE. 6"DAYLIGHT. 12"BED SIZE. 9" X 11-3/8"THROAT. 4-5/8"… CYLINDER BORE. 2-1/2"ROD. 1-3/4"APPROACH SPEED. 280 IPMPRESS SPEED. 50 IPMRETURN SPEED. 275 IPMOPERATING PSI. 500 ...more
Machinery Values Inc has 11 more
listings in C Frame Hydraulic Press Machines (Gap Frame).
Star #BG-2, double end spindle, carbine tool grinder & lapper, 7" diameter x 1-1/4" B x 1" W wheel, swivelling universal fixture, 1984
Category: Carbide Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Star
Model: BG-2
Year: 1984
STAR…"MADE IN JAPAN"…"HIGH-PRECISION"… CARBIDE TOOL GRINDING… LAPPING MACHINE SIMILAR TO AGATHON MODEL 175-DIA MODEL: BG-2… S/N: 840261… NEW: 1984 "The BG-2 offers an ideal solution for the requirements of producing a large variety of carbide single ...more
Machinery Values Inc has 1 more
listing in Carbide Grinders.
Carbide, Friction and Cold Saws
2 Results
4.72" Hyd-Mech #PNF350-2N, Non-Ferrous Cold Saw, 13.77" external disc diameter, 0.13" blade thickness, 7.08" max. vise opening, 3400 RPM, 2011
Category: Carbide, Friction and Cold Saws
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Hyd-Mech
Model: PNF350-2N
Year: 2011
HYDMECH NON-FERROUS COLD SAWMODEL: PNF350-2N, S/N: 017197, NEW: 2011 : CUTTING CAPACITY:-ROUND (TUBE)--AT 0 DEGREES. 4.72"--AT 45 DEGREES (RIGHT). 4.72"--AT 45 DEGREES (LEFT). 4.3"-SQUARE (TUBE)--AT 0 DEGREES. 4.13"--AT 45 DEGREES (RIGHT).″.93"--AT 45 DEGREES ...more
Machinery Values Inc has 1 more
listing in Carbide, Friction and Cold Saws.
Cincinnati Milacron No. 15 Mdl. Cinco, wkrst centerless grinder, 24" wheel, dressers, coolant, 1979
Category: Centerless Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cincinnati
Model: CINCO
Year: 1979
CINCINNATI MILACRON CENTERLESS GRINDER MODEL: CINCO 15… S/N:″50200079-6049… NEW: 1979 CAPACITY:STD. THRU FEED AND INFEED WORK RESTS:… 0 TO″" DIA.MAX. WORK DIAMETER DEPENDING ON WHICH WORK REST IS ORDERED:… 4" DIA.WHEELS:GRINDING WHEEL, WIDTH UP TO:… 8"DIA. ...more
Machinery Values Inc has 6 more
listings in Centerless Grinders.
Circumferential (Circle) Seam Welders
2 Results
125 KVA Sciaky #PMM2TCK-125-36-10, Seam Welder, 60000 Amp., 10" x 36" Throat Dim., 4000 lb. @ 80 PSI Electrode Force, Intertron Micro-Processor Control
Category: Circumferential (Circle) Seam Welders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Sciaky
Model: PMM2TCK-125-36-10
125 KVA X″6" SCIAKY SEAM WELDERMODEL PMM2TCK-125-36-10… S/N 6655 Circular Primary Volts. : 460/3/60 Secondary Volts : 1.56V-3.12V KVA : 125 Peak Secondary Amps. : 60,000 Amps @ 10 Cycle Pulse Time Throat Dimensions : 10" X″6" Pressure Ratio : 50/1 Electrode Force : 4,000 lbs. @ 80 psi ...more
Machinery Values Inc has 1 more
listing in Circumferential (Circle) Seam Welders.
CNC Angle Head Cylindrical Grinders
1 Result
12.6" x 20" Mitsubishi #PD32-B50A, CNC angle head cylindrical grinder, 20" x 4.7" x 8" wheel, Fanuc 21i-TB, enclosure, coolant, 2011
Category: CNC Angle Head Cylindrical Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Mitsubishi
Model: PD32-B50A
Year: 2011
12.6" x 20" MITSUBISHI - NIDEC…"MADE IN JAPAN" CNC ANGLE HEAD CYLINDRICAL GRINDER FANUC 21i-TB CNC CONTROL MODEL: PD32-B50A… S/N: GP726… MANUFACTURED 11/2011 - INSTALLED JANUARY 2012 The Nidec P-Series CNC Cylindrical Grinder is a top-tier CNC machine designed for ...more
Cincinnati #220-8, CNC centerless grinder, 4" diameter, 20 HP, 24" x 6" wheel, Emerson PLC, rebuilt
Category: CNC Centerless Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cincinnati
Model: 220-8
Cincinnati Model #220-8 CNC Centerless Grinder S/N: 2M8HFS-30 Updated by…"Centerless Grinder Repair" with "Servo Grinder Control". Provides Infeed… Thrufeed Options.… Loader Selection Presently has a 24" x 6"W Grinding Wheel Complete Grinder, Ready to Deliver, In ...more
Machinery Values Inc has 1 more
listing in CNC Centerless Grinders.
CNC Cylindrical Grinders
1 Result
8" x 20" Tru Tech #OD-8-20, CNC outside dimension cylindrical grinder, 14" x 5" x 2.5" wheel, 6-jaw chuck, 5 HP, Renishaw LP2 touch probe, coolant, 2006
Category: CNC Cylindrical Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Tru Tech
Model: OD-8-20
Year: 2006
TRU TECH SYSTEMS CNC UNIVERSAL CYLINDRICAL GRINDER MODEL:… TTS-OD-8-20… S/N: TTS-8080… NEW: 2006 MAXIMUM GRIND DIAMETER. 8"DISTANCE BETWEEN CENTERS. 20"STANDARD WHEEL SIZE. 14" DIAMETER, 5" BORE, 2.5" MAX. WHEEL WIDTHGRINDING WHEEL SPEED. 500 -″000 RPMMAXIMUM ...more
CNC Folding Machines (Folders)
1 Result
100" Fasti #212-25-6, CNC Folding Machine, 13.77" stroke, 13.5 HP, 1999
Category: CNC Folding Machines (Folders)
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Fasti
Model: 212-25-6
Year: 1999
8' x 1/4" FASTI FOLD APRON BRAKEMODEL 212-25-6… S/N 99212007… NEW 1999 WORKING LENGTH. 100"MAX SHEET THICKNESS.236CLAMPING BEAM STROKE. 13.77"ANGLE ADJ. 0-180 DEGREESLOWER BEAM ADJUSTMENT.″.15"FOLDING BEAM ADJUSTMENT.″.15"MAXIMUM CLAMPING BEAM ...more
CNC Horizontal Spindle Surface Grinders
2 Results
6" x 18" Amada Wasino #Meister, CNC surface grinder, electromagnetic chuck, 8" x 1/4" x 1-1/4" wheel, Fanuc 20-FA, 3-point dresser, coolant, 1999
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Amada
Model: MEISTER
Year: 1999
Amada-Wasino…"Meister"…"CNC" "MADE IN JAPAN" "HIGH PRECISION - HIGH PRODUCTIVITY" SURFACE… PROFILE GRINDER S/N:… 22101039… NEW:… 1999 :TABLE WORKING SURFACE. 17-″/4" x 5- 7/8"MAX. LONGITUDINAL TRAVEL. 18- 7/8"MAX. ...more
Machinery Values Inc has 1 more
listing in CNC Horizontal Spindle Surface Grinders.
Weldon #UGC, CNC ID grinder, 7.08" sw, 4" chuck, Fanuc 21i-TB, Epson robot loader, 2006
Category: CNC Internal Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Weldon
Model: UGC
Year: 2006
Weldon Model UGC Small Capacity CNC I.D. Grinder ** Fanuc 21i-TB CNC Control ** ** Epson Robot Loader ** New: 2006 Comments from the former owner": "Machine while running in our shop, production holding +/-.00005" diametrical size, roundness, straightness, and also below a 4 Ra micro surface finish. ...more
Moore #G-18 8400-CP, CNC jig grinder, 18" X, 11" Y, 12.6" Z, 11" x24" tbl.
Category: CNC Jig Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Moore
Model: G-18
MOORE CNC JIG GRINDING WITH CONTINUOUS PATH CONTOURING MODEL: G-18 8400-CP… S/N: G-3764… ALLEN BRADLEY 8400 CNC CONTROLCONTINUOUS PATH CONTOURING 11" x 24" TABLE18"X x 11" x 12.6"Z TRAVELSSPINDLE STROKE 4"DISTANCE TABLE TO SPINDLE NOSE, 2" TO 18" PLEASE NOTE THIS ...more
Daewoo Doosan #Puma-2000SY, Multi-Axis CNC Turning Center, 23.6" swing, 33.8" between centers, 13" turning diameter, 9.8" X, 3.94" Y, 22.8" Z, 20 HP, 5000 RPM, 12-tool, Fanuc 18iTB, 2008
Category: CNC Lathes and Turning Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Daewoo Doosan
Model: PUMA-2000SY
Year: 2008
DOOSAN PUMA 2000SY MULTI-AXIS CNC TURNING CENTERNEW: 2008 VIDEO LINK: https://youtu.be/SFn-KJUPCp8?si=usVTCp-f7Y-k0m6bCAPACITY:Swing over bed… 23.6"Swing over carriage… 21.6"Maximum bar capacity… 2.625"Maximum turning diameter, main spindle… 13.0"Distance between ...more
Machinery Values Inc has 19 more
listings in CNC Lathes and Turning Centers.
CNC Machine Controls
1 Result
Fanuc #3, air cooled spindle motor & air cooled spindle drvie, CNC parts, TYPE A06B-1003-B100#2000 TYPE A06B-6055-H103
Category: CNC Machine Controls
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Fanuc
Model: 3
NUMERIC FANUC A/C SPINDLE MOTOR… SERVO DRIVE, MODEL: 3, IT CAME OFF A CNC MILL RETROFIT BY CINCINNATI-MILACRON, SERVO DRIVE: TYPE: A06B-6055-H103, SERVO DRIVE: S/N: K69-00823A, SPINDLE MOTOR: TYPE: A06B-1003-B100#2000, SERIAL NUMBER: C-514366, MFG DATE: 07/1985, EXCELLENT USED CONDITION - NOT RECONDITIONED, BUT ...more
CNC Plasma Cutting Systems (Flame Cutters)
1 Result
Engel Vulcan #SP510, CNC plasma cutter, Siemens Sinumerik 808D Advanced M Control, 2007, #160396
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Engel
Model: SP510
Year: 2007
ENGEL VULCAN 5' X 10' CNC PLASMA CUTTERMODEL SP510… S/N VULFC4260… NEW 2007 :Cutting Table:Max. Sheet Thickness. 1/2"Max. Sheet Size. 60" x 120"Max. Sheet Weight. 1,000 Lbs.Cutting Speed:Depending On Sheet Thickness. 1- 1,000 IPMMax. Positioning Speed. 2,000 IPMPierce. ...more
73 Ton, Trumpf #Trubend-3066, hydraulic press brake, 6.6' OA, 69" between housing, 7.87" stroke, 14" open, 2006
Category: CNC Press Brakes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Trumpf
Model: TRUBEND-3066
Year: 2006
73 TON X 80" TRUMPF HYDRAULIC PRESS BRAKEMODEL TRUBEND″066… S/N B0203A0096… NEW 2006 TONNAGE. 73BED LENGTH. 80"DISTANCE BETWEEN HOUSINGS. 69"LENGTH BETWEEN THE HOUSINGS. 93"STROKE. 7.87"OPEN HEIGHT. 14"CLOSED HEIGHT. 5.9"Y-AXIS RAPID DOWNWARD MOVEMENT. 200 MM / ...more
Machinery Values Inc has 7 more
listings in CNC Press Brakes.
CNC Tool and Cutter Grinders
1 Result
Excalibur #E45CNC, CNC tool & cutter grinder, 6" wheel diameter, 6000 RPM, 5 Axis, 2007
Category: CNC Tool and Cutter Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Excalibur
Model: E45CNC
Year: 2007
EXCALIBUR CNC TOOL… CUTTER GRINDER New: 2007 The E45 is designed to manufacture small end mills from solid blanks in ONE chucking.… It has four CNC axes and one pneumatic axis. The E45 has superb accuracy to produce tools from 1/32" to″/4" diameter, straight or helical flute to 60 degree ...more
CNC Vertical Bed Mills
3 Results
Bridgeport #Series-II, Vertical Milling Machine, 11" x58" table work surface, 30" X, 15" Y, 16" Z, 26-5/8" throat, 4 HP, 3500 RPM, Mitutoyo 2-Axis digital read out
Category: CNC Vertical Bed Mills
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Bridgeport
Model: SERIES-II
11" X 58" BRIDGEPORT VERTICAL MILL MODEL: SERIES II, S/N: 2154, NEW: 1980's :WORKING SURFACE OF TABLE. 11" X 58" RANGE: - LONGITUDINAL.″0" - CROSS. 15" VERTICAL (KNEE). 16" RAM TRAVEL. 16"MAXIMUM THROAT DISTANCE. 26-5/8" MINIMUM THROAT DISTANCE. 10-5/8" ...more
Machinery Values Inc has 2 more
listings in CNC Vertical Bed Mills.
Coil Cradles and Straighteners
1 Result
4000 lb. Rowe #B20-C4000J, coil cradle & straightener, 20" x .080" stock, 50" outside dimension, variable speed, loop Control, forward/reverse jog, variable speed drive, 1970
Category: Coil Cradles and Straighteners
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Rowe
Model: B20-C4000J
Year: 1970
4,000 LB. X 20" X.080" ROWE CRADLE STRAIGHTENER… MODEL B20-C4000J… S/N 14991… NEW 1970… COIL CAPACITY. 4,000 Lbs.WIDTH. 20"… MAX. THICKNESS.080"MIN. THICKNESS.030"MAX. OD. 50"SPEED. VARIABLE :- LOOP CONTROL- FORWARD / REVERSE / JOG- VARIABLE SPEED DRIVE ...more
Coolant Filtering Systems
1 Result
Monolan Coolant System #IM-3030-H2-6-25LH, serial #KM2805, 460 V., #128709
Category: Coolant Filtering Systems
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Monolan
Model: IM-3030-H2-6-25LH
MONLAN COOLANT SYSTEM MODEL: IM-3030-H2-6-25LH… S/N: KM 2805 460 VOLTS * * * LOCATED IN OUR HARRISON, NJ WAREHOUSE * * *.
Desiccant Compressed Air Dryers
1 Result
Conair #D01A8201310, compu-dry plastic dryer, 208 V., 0-600°F, 1988
Category: Desiccant Compressed Air Dryers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Conair
Model: D01A8201310
Year: 1988
CONAIR, COMPU-DRY PLASTICS DRYER, MODEL:D01A8201310, S/N:6D1588, NEW 1988, VOLTAGE. 208/3/60, REGENERATION. 0-600 F.
Die Cutting Press Machines
2 Results
25 Ton, Schwabe #D, 1/4"-3" stroke, 13" x 24" swing arm, 20" x 40" table, 3 HP, s/n #26694, #155690
Category: Die Cutting Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Schwabe
Model: D
25 TON HERMAN SCHWABE CLICKER PRESSMODEL D… S/N 26694 RATED CAPACITY. 25 TONSSTROKE.(ADJUSTABLE). 1/4" -″"SWING ARM. 13" X 24"TABLE. 20" X 40"MOTOR.″ HP MOTOR, 208/220/440 VOLT S:- 2 HAND OPERATION- AUTOMATIC SPRING RETRUN FOR FASTER OPERATION DIMENSIONS: 48" X ...more
Machinery Values Inc has 1 more
listing in Die Cutting Press Machines.
Disintegrators (Including Tap Disintegrators)
1 Result
Electro-Arc #10DVHK, 20 KVA, 440 V., tap disintegrater, sub table, 2017, #160305
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Electro-Arc
Model: 10DVHK
Year: 2017
ELECTRO-ARC TAP DISINTEGRATOR WITH AUTOMATIC DOWNFEED,…"Q" HIGH-PRECISION HEAD, MODEL: 10DVHK… S/N: 15046… NEW: 2017 TABLE WORK SURFACE. 50.5" X″9.5"TABLE CAPACITY. 6,000 LBS.CROSSARMS LENGTH. 48"COLUMN HEIGHT. 60" CUTTING SPEEDS:1/4".1 MIN. ...more
.0135" to 2" Optima, universal drill grinder, optical comparator
Category: Drill Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Optima
OPTIMA (MADE IN SWITZERLAND)…"HIGH-PRECISION" DRILL GRINDER MODEL: UNIVERSAL… S/N:… B186.022 RANGE.0135"- 1"DIAMETERPOINT ANGLE. 70 DEGREES TO 145 DEGREES… (DIFFERENT SETTING) 145 DEGREES TO 180 DEGREESPRIMARY CUTTING ANGLE. 0 DEGREES TO 40 DEGREESSECONDARY CLEARANCE ...more
Machinery Values Inc has 1 more
listing in Drill Grinders.
Dryers and Coolers
1 Result
Apium #F300, 3D Filament Dryer, 2020
Category: Dryers and Coolers
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: F300
Year: 2020
APIUM F300″D FILAMENT DRYER.
Dust Collectors
1 Result
1500 cfm United Air Specialty #VP-1500, dust collector, 3 HP, 2005
Category: Dust Collectors
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: United
Model: VP-1500
Year: 2005
UNITED AIR SPECIALISTS DUST COLLECTORMODEL VP-1500… S/N 60058933… NEW 2005 CFM. 1500BLOWER MOTOR.″ HPFILTER AREA. 283SOUND LEVEL. 81 dBADUST DRAWER STORAGE. 1.242 cu. FtDIMENSIONS. 53" x″0" x″9"WEIGHT. 502 LBS MOTOR HP.″ HP / 460 V /″ Ph / 60 Hz. /″.8 ...more
11" x 18" Hardinge #HLV-EM, precision engine lathe, 1-1/4"hole, Steady Rest, reconditioned 2023
Category: Engine Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Hardinge
Model: HLV-EM
HARDINGE SUPER PRECISION TOOL ROOM LATHE MODEL HLV-EM, S/N: HLV-H 10403-TMACHINE RECONDITIONED… UNUSED SINCE :SPINDLE CONSTRUCTION. HARDINGE BALL BEARINGSPINDLE NOSE THREADED. 2-3/16" 10RH SPINDLE CAPACITY: WITH ROUND TYPE 5C COLLETS. 1-1/16"WITH STEP CHUCKS. 1-1/16" TO 6"WITH JAW CHUCKS. ...more
Machinery Values Inc has 8 more
listings in Engine Lathes.
External/Internal Thread Grinder
1 Result
Matrix #47-M/C, thread grinder, 16" sw, 42" cc, 1980
Category: External/Internal Thread Grinder
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Matrix
Model: 47-M/C
Year: 1980
MATRIX THREAD GRINDER, NEW 1980 MODEL: 47 M/C… TYPE: 7… MACHINE #5599 TAH1227 : SWING OVER TABLE WAYS. 16"DISTANCE BETWEEN CENTERS. 42"MAX. GROUND LENGTH. 40"MAX. GROUND DIAMETER. 12.5"GRIDING WHEEL DIAMETER. 16" AND 20"HP OF WHEELHEAD DRIVE. 10 AND 20HELIX OF WHEEL ...more
30 Ton, Strippit #Sonic-18/30, single station punch press, 5/8" stroke, 18" throat, 5-13/32" Shut Height, 165 SPM, electric foot pedal, Back Gauge w/ finger stops, 1968
Category: Fabricator Punches
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Strippit
Model: SONIC-18/30
Year: 1968
30 TON STRIPPIT SONIC 18/30 FABRICATORMODEL SONIC 18/30… S/N 27261468… NEW 1968 Capacity.″0 Ton Stock Size. 18" x″0"… Material Thickness. 1/4" max Max. Hole size.″/4" in 1/4" m.s.… Throat depth. 18" Shut Height. 5-13/32"Stroke. 5/8" ...more
Machinery Values Inc has 2 more
listings in Fabricator Punches.
Feeding and Straightening Machines
2 Results
24" x .125" Air Feeds Inc. #AF3, press feed, (5) 2.25" diameter rolls, adj. cabinet mounted
Category: Feeding and Straightening Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Air Feeds
Model: AF3
24" x 24" AIR FEED INC. FEEDER/STRAIGHTNENERMODEL AF-3… S/N 840614… NEW 1984 MAX. WIDTH. 24"MAX. STROKE. 24"MAX. THICKNESS W/O STRAIGHTENER.@24".125"NUMBER OF STRAIGHTENING ROLLS. 5 @ 2.25" DIAMETER DIMENSIONS: 62" x 87" x 61"WEIGHT: 2000 lbs :- MULTI ...more
Machinery Values Inc has 1 more
listing in Feeding and Straightening Machines.
Flat and Shape Straighteners for Coil Handling
4 Results
12" x .018" Cooper Weymouth #12A, straightener, 7 rolls, 1-1/2" roll diameter, 42" pass line, 10-50 FPM, 3/4 HP, #160663
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cooper Weymouth
Model: 12A
12" X.078" COOPER WEYMOUTH PETERSON STRAIGHTENERMODEL 12A Rated Capacity. 12" x.078"Minimum Thickness.018"Number of straightening rolls. 7 (3 over 4)Maximum stock width. 12 Roll diameter. 1-1/2"Center Distance. 1-3/4"Speed Range. 10 - 50 fpm (variable)Pass Line. ...more
Machinery Values Inc has 3 more
listings in Flat and Shape Straighteners for Coil Handling.
Floor Plates and Bed Plates
1 Result
96" x 34" x 25" T-Slotted floor plate
Category: Floor Plates and Bed Plates
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: T-SLOTTED FLOOR PLATE
34" X 96" X 25" T-SLOTTED SET UP TABLE T-SLOTTED WORKING AREA.″0" x 88" CAST IRON CONSTRUCTION INSPECT IN OUR NEW JERSEY WAREHOUSE.
Hybco #1900/2100, form grinder, 14" X, 6.5" Y, 7.25" Z, 7" wheel, Bijur one shot lube, 1988, #150409
Category: Form Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Hybco
Model: 1900/21
Year: 1988
HYBCO Form Relief Grinder Model 1900/2100… S/N… TG376 (New… 1988) Table working surface:6" x″6" Longitudinal table travel: 14" Cross table travel:6-1/2" Grinding spindle, vertical travel: 7-1/4? Grinding spindle rotation:″60 degrees Grinding spindle tilt, either ...more
Machinery Values Inc has 1 more
listing in Form Grinders.
Gleason #13A, gear cutter sharpener
Category: Gear Cutter Sharpeners
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Gleason
Model: -13A
GLEASON…"HYPOID" 13A GEAR CUTTER SHARPENER Video Link: https://youtu.be/Hf9b8iEWGCw Diameter of spiral bevel cutters″.5" to 18" (89 to 457mm)Diameter of revacycle cutters 16"… 18"… (406, 457mm)Diameter of Coniflex cutters 9"… 15" ...more
Grinding Fixtures/Attachments
3 Results
Cincinnati Milacron, grinder attachment, radius grinding fixture
Category: Grinding Fixtures/Attachments
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cincinnati
CINCINNATI-MILACRON RADIUS ATTACHMENT ** BEAUTIFUL CONDITION ** ** F.O.B. OUR HARRISON, NJ WAREHOUSE **.
Machinery Values Inc has 2 more
listings in Grinding Fixtures/Attachments.
H Frame Hydraulic Press Machines
24 Results
30 Ton, Press Master #HFP-30, H-Frame hydraulic, 12" stroke, 5" bore, 75" height, #154119
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: HFP-30
30 TON PRESSMASTER H-FRAME PRESSMODEL HFP-30… NEW - IN STOCK FOR IMMEDIATE DELIVERY RATED CAPACITY.″0 TONS STROKE. 16" BORE. 5" ROD. 2.5"RAM SPEED: ADVANCE. 29 IPM RETURN.″8 IPMDISTANCE BETWEEN POSTS (RIGHT TO LEFT). 42"DISTANCE BETWEEN POSTS (FRONT TO BACK). 9"MAXIMUM ...more
Machinery Values Inc has 23 more
listings in H Frame Hydraulic Press Machines.
Hardware Inserting Presses
3 Results
6 Ton, Haeger #HP6-C, hydraulic hardware insertion press, 8.5" stroke, 18" throat, AF-MAS vibratory feeder bowl, foot pedal, 1992
Category: Hardware Inserting Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Haeger
Model: HP6-C
Year: 1992
6 TON HAEGER HYDRAULIC INSERTION PRESSMODEL HP6-C… S/N 619… NEW 1992 MAXIMUM FORCE. 12,000 LBS. (6 tons)STROKE LENGTH. 0 - 8-1/2"VERTICAL UPSTROKE.″/8" - 8-1/2"THROAT DEPTH. 18"OIL CAPACITY. 18 GALLONSMOTOR. 230 v /″ Ph / 60 Weight: 1,000 lbs.Dimensions:″0" ...more
Machinery Values Inc has 2 more
listings in Hardware Inserting Presses.
Horizontal Band Saws
1 Result
16" x 9" W.f. Wells #W-9-1, semi-auto horizontal band saw, coolant, 1" x .035" x 11' 6" blade, 60-300 FPM, 45° swivel vise, 2002
Category: Horizontal Band Saws
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: W.F. Wells
Model: W-9-1
Year: 2002
9" X 18"… W.F. WELLS HORIZONTAL BAND SAWMODEL: F-9-1, S/N: W027128,… MFG: 2002 :CUTTING CAPACITY RECTANGULAR. 9" X 18"MSXIMUM WORK CAPACITY. 2,000 LBSBLADE SIZE. 1" X.035 X 11-6"BLADE SPEED VARIABLE. 60 -″00 FPMSAWING FORCE.″0 - 120 LBSVISE SWIVEL CAPACITY. ...more
Horizontal CNC Machining Centers
2 Results
Kitamura #HX-250G, Horizontal Machining Center, 12" X, 12" Y, ARUMATIK-MI 4-Axis CNC control, 15000 RPM, BT30, 40ATCs
Category: Horizontal CNC Machining Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Kitamura
Model: HX-250G
KITAMURA CNC HORIZONTAL MACHINING CENTER, MODEL: MYCENTER-HX250G, NEW: 2013 :X-AXIS TRAVEL. 12"Y-AXIS TRAVEL. 12"Z-AXIS TRAVEL. 13"SPINDLE POWER. 15 HPSPINDLE SPEED. 15,000 RPMTOOL POSITIONS…. 40SPINDLE TAPER. BT-30PALLET DIMENSIONS. 10" X 10"NUMBER OF PROGRAMMABLE AXES. 4MAXIMUM ...more
Machinery Values Inc has 1 more
listing in Horizontal CNC Machining Centers.
Sunnen #MBB-1660K, Hone, 115 V., 6.5" diameter x 16" L, 2500 RPM, 0.5 HP, 2010
Category: Horizontal Hones
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Sunnen
Model: MBB-1660K
Year: 2010
SUNNEN HONE MODEL: MBB-1660-K… S/N: 4b1-96136… NEW: 2005 I.D. RANGE. 0.060" TO 6.500"LENGTH RANGE. HONES BORES UP TO 16" IN LENGTH, DEPENDING ON BORE DIAMETER SPINDLE SPEEDS (12). 200, 250,″20, 400, 500, 640, 800, 1,000, 1,270, 1,600, 2,000 AND 2,500 RPM SPINDLE MOTOR. 1/2 HP SPINDLE ...more
15 Ton, Benchmaster, horizontal press
Category: Horizontal Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Benchmaster
15 TON BENCHMASTER HORIZONTAL PRESS.
40 Ton, Wysong #H-4072, 6' overall, hydra-mech, 62" between housing, 2.5"stroke, 3" adj, 8.5"throat, 1990, #153742
Category: Hydraulic Press Brakes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Wysong
Model: H-4072
Year: 1990
40 TON x 6' WYSONG HYDRA-MECHANICAL PRESS BRAKE MODEL H-4072… S/N HPB13-263… NEW 1990 TONNAGE. 40 TONSOVERALL BENDING LENGTH. 72"DISTANCE BETWEEN HOUSINGS. 62"CAPACITY (MS). 72" x 12 GADIE SPACE. 9"STROKE. 2-1/2"RAM ADJUSTMENT.″" SPM. 25 MAX.… MOTOR. 5 ...more
Machinery Values Inc has 5 more
listings in Hydraulic Press Brakes.
4 Ton, Denison #WR45LC304F51SO95316D, 12" stroke, 7.5" thr, 16" daylight, 2000 psi, hydraulic multi-press, 1978, #153951
Category: Hydraulic Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Denison
Model: WR45LC304F51SO95316D
Year: 1978
4 TON DENISON HYDRAULIC MULTI-PRESSMODEL WR45LC304F51SO95316D… S/N… 27519… NEW 1978 RATED CAPACITY. 4 TONSSTROKE. 12"… THROAT. 7.5"… DAYLIGHT. 16"… MAXIMUM PSI. 2000… MOTOR : 5 HP,″/60/230/440.
Machinery Values Inc has 7 more
listings in Hydraulic Presses.
Hydraulic Straightening Presses
5 Results
100 Ton, Press Master #SP-100, 12" stroke, 10 HP, foot pedal, #140367
Category: Hydraulic Straightening Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: SP-100
100 TON PRESSMASTER HYD. STRAIGHTENING PRESSMODEL SP-100T RATED CAPACITY. 100 TONSPRESSING SPEED. 20 IPMADVANCE SPEED. 20 IPMRETURN SPEED. 26 IPMTABLE WIDTH. 96"TABLE DEPTH. 20"FULL STROKE. 18"THROAT DEPTH. 12"DAYLIGHT. 27"FLOOR TO TABLE.″5"MOTOR. 10 HP STANDARD S: - CYLINDER ...more
Machinery Values Inc has 4 more
listings in Hydraulic Straightening Presses.
Cincinnati Milacron, Heald #273A, universal ID grinder, 24.5" swing, 16" stroke, 12" OS Walker Alnico PMC, 1974
Category: Internal Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cincinnati
Model: 273A
Year: 1974
#273A CINCINNATI MILACRON - HEALD "HIGH-PRECISION" UNIVERSAL INTERNAL GRINDING MACHINE MODEL: 273A… S/N: 47101… NEW: 1974 MAXIMUM SWING OVER TABLE EXTENSION, WORKHEAD… PARALLEL TO TABLE WITHOUT CHUCK GUARD, PERMITS NO WORKSLIDE TRAVEL, LIMITED TABLE TRAVEL. 24-1/2" SWING WORKHEAD ...more
Machinery Values Inc has 3 more
listings in Internal Grinders.
Moore #3, jig grinder, 11" x 24" table, Heidenhain 2-Axis digital read out, dust collector, work light
Category: Jig Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Moore
Model: 3
#3 MOORE JIG GRINDER WITH HEIDENHAIN 2-AXIS DRO S/N: G-825 TABLE SIZE. 11" x 24" RANGE: TABLE MOVEMENT. 11" x 18" TABLE TOP TO WHEEL COLLET. 2" x 18" SPINDLE TO COLUMN WAYS. 10" SPINDLE TO COLUMN BELOW WAYS. 13-1/2" INFINITELY VARIABLE SPINDLE SPEEDS. 40 TO 250 RPM INFINITELY ...more
24" Cushman, 4-jaw lathe chuck, 12-1/2" hole thru, A-1 spindle
Category: Lathe Chucks
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cushman
24" 4-JAW CUSHMAN REAR CHUCK WITH 12-1/2" HOLE THROUGHwith 20" A-1 spindle.
Machinery Values Inc has 1 more
listing in Lathe Chucks.
Longitudinal Seam Welders
1 Result
Sciaky PPM.2TLCQ-125-36-20, circular & longitunial arms resistance seam welder, 460 V., 3-phase, Pertron Weld Master PWC300 Control
Category: Longitudinal Seam Welders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Sciaky
SCIAKY PMM2TLCQ-125-36-20″-PHASE RESISTANCE SEAM WELDER, CIRCULAR AND LONGITUNIAL ARMS Manufacturer… :… Sciaky Type :… Seam, PMM2TLCQ-125-36-20, Circumferential and Longitudinal. Serial Number :… 9413. Primary Volts. :… 460/3/60 KVA :… 125, Secondary Amps 60,000 at 20 ...more
Marking Machines (Including Laser Markers)
1 Result
Columbia #CMT410-12, hydraulic roll marking machine, 18 ton, 15" die space, 2019
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Columbia
Model: CMT410-12
Year: 2019
COLUMBIA HYDRAULIC ROLL MARKING MACHINEMODEL CMT410-12… S/N AR3600… NEW 2019 TONS OF FORCE. 1/2 - 18 TONSDIE SPACE. 9" - 15"MAX. CYCLES PER MINUTE. 90MOTOR HP. 5 HP VOLTAGE. 220 / 440 /″ PHOIL RESERVOIR. 27 GALLONS :- ADJUSTABLE TABLE HEIGHT- ANTI-REPEAT PALM BUTTONS WITH RING GUARDS- ...more
Material Handling Equipment
1 Result
Auto load / unloader, Amada #MP1225NJ, 4' x8' sheet, 2006
Category: Material Handling Equipment
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Amada
Model: MP1225NJ
Year: 2006
AMADA AUTOMATIC LOAD/UNLOADERMODEL MP1225NJ… S/N A1225245… MFG 2006 : Cycle Time (Load/Unload)… 25 Seconds Maximum Sheet Size… 4' x 8' Minimum Sheet Size 27.5" x 11.8" Material Mild Steel, Stainless Steel, Aluminum Material Thickness Range 24 gauge - 10 gauge Loading ...more
55 Ton, Dreis & Krump #68-B, mechanical press brake, 8' overall, 78" between housing, 3" stroke, 12" dia space, 3" ram, front operated manual back gauge, 1964
Category: Mechanical Press Brakes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Dreis & Krump
Model: 68-B
Year: 1964
8' x 55 TON CHICAGO DREIS… KRUMP MECH. PRESS BRAKEMODEL 68-B… S/N L-14324… NEW 1964 Capacity near bottom of stroke. 55 TONS at mid-stroke.″6 TONSBending capacity. 8' x 12 gauge 6' x 10 gaugeSpeed. 40 SPMStroke.″"Ram adjustment (power).″"Die space (sdau). ...more
Machinery Values Inc has 2 more
listings in Mechanical Press Brakes.
Miscellaneous Mixers and Blenders
1 Result
Thermco #8300-3121HNDANL1, gas mixer, 250 SCFH, 2014
Category: Miscellaneous Mixers and Blenders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Thermco
Model: 8300-3121HNDANL1
Year: 2014
THERMCO GAS MIXERMODEL: 8300HN10AN1100F2500, S/N:″3566, NEW: 2014 : RANGE. 0-10% HYDROGEN IN NITROGENCAPACITY. 0-250 SCFHHYDROGEN INLET PRESSURE. 100-125 PSIGNITROGEN INLET PRESSURE. 100-125 PSIGMIXED GAS OUTLET PRESSURE. 10-40 PSIGPOWER:. 115 VAC CONSISTING OF: - THERMCO CONSTANT RATIO ADJUSTABLE GAS MIXING ...more
1/8" x 9.84" x 9.84" Amada #CSW-250, Notching Machine, 1.91" stroke, 42 SPM, 230/460 V, 3-Ph., 1988
Category: Notching Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Amada
Model: CSW-250
Year: 1988
9-5/8" x 9-5/8" X 1/8" AMADA NOTCHERMODEL CSW-250… S/N 25001996… NEW 1988… CAPACITY. 1/8"NOTCHING SIZE. 9.84" x 9.84"TONNAGE. 11STROKE. 1.91"SPM. 42COPER CAPACITY. 6" x 2"RESERVOIS. 14.5 GALLONSMOTOT. 230/460 V /″ PH :- REAR COPING STATION- FOOT ...more
Machinery Values Inc has 1 more
listing in Notching Machines.
12" Mitutoyo #PJ311, vertical projection bench optical comparator, 10X/20X/50X lenses, 1991
Category: Optical Comparators
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Mitutoyo
Model: PJ311
Year: 1991
12" MITUTOYO VERTICAL PROJECTION BENCH MODEL "MADE IN JAPAN" OPTICAL COMPARATOR MODEL: PJ-311, CODE No.″02-101… S/N: 20090… NEW: 1991 SCREEN DIAMETER.,. 12"PROTRACTOR SCREEN ROTATES.″60 DEGREESSTAGE AREA. 5" x 5"APPROXIMATE STAGE ...more
Machinery Values Inc has 17 more
listings in Optical Comparators.
5000 lb. Norwalk #CR5052, pallet decoiler, 52" W, 60" outside dimension, 12"-40" stack height, loop Control arm w/ integrated guide roll, variable speed operation
Category: Pallet Decoilers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Norwalk
Model: CR5052
5,000 LB. NORWALK PALLET DECOILERMODEL CR5052… S/N 523839 Capacity. 5,000 lbs.Max OD. 60"Platform size. 52" diameter Speed. 0 - 12 RPM (vari)Coil stack height. 12" to 40"Floor to platform ht. 20"Motor. 1 hp Voltage. 110 v Dimensions: 60" x 52" x″8" high Weight: ...more
Machinery Values Inc has 2 more
listings in Pallet Decoilers.
Paper and Corrugated Materials Balers
1 Result
30" x 48" x 44" General #314-48L-16, hydraulic vertical baler
Category: Paper and Corrugated Materials Balers
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: 314-48L-16
HYDRAULICS VERTICAL BALER MODEL″14-48L-16… S/N″5644 PRODUCT BALE:… - LENGTH.″0"… - WIDTH. 48"… - HEIGHT. 44"… FEED OPENING:- WIDTH. 46"- HEIGHT. 42" MOTOR 5 HP / 230/460 VOLT,″ PHASE, 60 CYCLE TOTAL WEIGHT. 5,000# MEASURES: 125" ...more
65" Setco #SPL, 2 spindle, single speed, polishing lathe, 7 HP motor, 1-1/2" arbor, 12" L btw flanges, #160068
Category: Pedestal Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Setco
Model: SPL
SETCO MODEL SPL TWO SPINDLE SINGLE SPEED POLISHING LATHE WITH GUARDING… BACK STANDS, SET-UP TO BE USED WITH (2) GRINDING BELTS PER SIDE MACHINE SERIAL NUMBER 77087 OVERALL SPINDLE LENGTH, END TO END. 65"DISTANCE BETWEEN WHEELS PRESENT SET-UP. 45"ARBOR DIA. x WIDTH BETWEEN FLANGES. 1- 1/2" x ...more
Machinery Values Inc has 1 more
listing in Pedestal Grinders.
Plain Cylindrical Grinders
6 Results
4" x 18" Brown & Sharpe #5, plain cylindrical grinder, power table traverse, automatic infeed & plunge, 1957
Category: Plain Cylindrical Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Brown & Sharpe
Model: 5
Year: 1957
4" x 18" BROWN… SHARPE PLAIN CYLINDRICAL GRINDER MODEL: #5… S/N: 522-5-386… NEW: 1957… 4" SWING18" BETWEEN CENTERS14" WHEELMAX. WHEEL WIDTH IS 2"POWER TABLE TRAVERSE POWER AUTO INFEED OF GRINDING WHEELWHEEL SPINDLE RECIPRCATING OPTIONWORKHEAD SPINDLE ...more
Machinery Values Inc has 5 more
listings in Plain Cylindrical Grinders.
Plastic Granulators and Pelletizer Machines
1 Result
Granutec #TFG-810-5, plastic granulator, w/Hopper, 5 HP, #157613
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Granutec
Model: TFG-810-5
GRANUTEC MODEL: TFG.810 5HP BESIDE THE PRESS GRANULATORS/N:189.924 :Max Throughput 200 lbs/hrCutting Chamber 8" x 10"Rotor Knives 3 knivesShipping Weight 900 lbs.
Polishers (Including Buffing Jacks)
2 Results
G & P #2MVS-1000, grinding polish & buffing lathe, 1.5" x 6" spindle, 2008
Category: Polishers (Including Buffing Jacks)
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: 2MVS-1000
Year: 2008
G… P…"MADE IN USA" VARIABLE SPEED DUAL MOTORS GRINDING POLISHING AND BUFFING LATHE INDEPENDENT ELECTRONIC VARIABLE SPEED CONTROL FOR EACH SPINDLE COMES WITH OPTIONAL CONTACT WHEEL… BELT ATTACHMENT MODEL: 2MVS-1000… S/N: G-13803… NEW: 2008 SPEED RANGE, INFINITELY ...more
Machinery Values Inc has 1 more
listing in Polishers (Including Buffing Jacks).
Power Squaring Shears (Gauge)
3 Results
12 gauge x 4' Pexto #12-U-4F, power squaring shear, 62 SPM, 1800 RPM, 5 HP, 220/440 V., manual Back Gauge w/ readout, 72" squaring arm, 1959
Category: Power Squaring Shears (Gauge)
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Pexto
Model: 12-U-4F
Year: 1959
12 GA x 4' PEXTO POWER SQUARING SHEAR MODEL 12-U-4F… S/N 596654… NEW 1959… CAP. MILD STEEL. 12 GA CAP. STAINLESS STEEL. 14 GA CUTTING LENGTH. 48" HEIGHT. 48" RAKE PER FOOT.375 BACK GAUGE RANGE. 24"FRONT GAUGE.″6" STROKES PER MINUTE. 62 MOTOR. 1,800 RPM / 5 HP / ...more
Machinery Values Inc has 2 more
listings in Power Squaring Shears (Gauge).
Power Squaring Shears (Inch)
5 Results
3/16" x 6' Cincinnati #1406-R, mechanical shear, 18" gap, 36" power Back Gauge w/ front indicator, 1/4" rake angle, 7 holddowns, 60 SPM, 6' squaring arm w/ adj stops, (2) support arms
Category: Power Squaring Shears (Inch)
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cincinnati
Model: 1406-R
6' x″/16" Cincinnati Mechanical ShearModel 1406-R… S/N″9215… New 1974 Thickness.″/16" (.187")Cutting Length. 6'2"Gap. 18"Std. Back Gage Range.″6"Rake Angle. 1/4"Number of Hyd. Holddowns. 7Std. Maximum Strokes / Min. 60 SPMStd. Motor HP. ...more
Machinery Values Inc has 4 more
listings in Power Squaring Shears (Inch).
Power Tank Turning Rolls
1 Result
7 Ton, Aronson #WRD-14, tank turning rolls & idler, 14000 lb., rubber wheels, 1970
Category: Power Tank Turning Rolls
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Aronson
Model: WRD-14
Year: 1970
14,000 Lb. Cap. ARONSON Tank Turning Roll and Idler Model WRD/WRI 14… S/N 7033… New 1970 Max. capacity w/(1) driver… idler. 7… tons Work diameter range.…" to 'Variable turning speed range. 2 to 50 IPMTire diameter. 11"Tire face.…" :- (1) Power Unit… ...more
Precision and Second Operation Lathes
4 Results
11" x 18" Hardinge #HLV-EM, precision engine lathe, 1-1/4" hole, inch/metric, variable speed, Acu-Rite 2-Axis digital read out, 5C collet, L19 quick change toolpost w/ holders, 1992
Category: Precision and Second Operation Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Hardinge
Model: HLV-EM
Year: 1992
HARDINGE SUPER-PRECISON TOOLROOM LATHEMODEL: HLV-EM, S/N: HLV-H-14060-T, NEW: 1992 :SPINDLE CONSTRUCTION. HARDINGE SUPER-PRECISION… PRELOADED BALL BEARING… SPINDLE NOSE. HARDINGE TAPERED… INF. VARIABLE SPINDLE SPEEDS. 125 TO″000 RPMHOLE THROUGH SPINDLE. 1-1/4"SPINDLE CAPACITY: w/ROUND ...more
Machinery Values Inc has 3 more
listings in Precision and Second Operation Lathes.
Press Accessories and Parts
1 Result
Press Hydraulic Bender, Edwards #HP20T, 20 ton, 10" stroke, 24" x42" tbl., 2.25" cylinder
Category: Press Accessories and Parts
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: PRESS HYD BENDER
20 TON EDWARDS HYDRAULIC BENDERMODEL HP-20… S/N 0006717HP20… NEW 2018 :RAM FORCE. 20 TONMAXIMUM STROKE. 10"TABLE SIZE. 24" WIDE X 42" LONGCYLINDER. 2-1/4"MOTOR. 5 H.P.VOLTAGE AVAILABLE. 230/460″ PH 60 HZFOOTPRINT.″0" W X 48" L X 60" HWEIGHT. 1,500 LBS ...more
11.8" x 0.08" PA Industries #SRF-300, press servo feed, 3.55" roll diameter, jog pendant, 2017
Category: Press Feed Lines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Pa Industries
Model: SRF-300
Year: 2017
11.8" x.080" P/A INDUSTRIES SERVO FEEDERMODEL SRF-300 EDGE… S/N 201709-10218… NEW 2017 WIDTH. 11.81" THICKNESS.080" (at full width)Max roll opening.138Pulling Power (peak / cont.).″94 / 147 LBS.ROLL DIAMETER.″.55" Dimensions 27" X 23.5" X 22" HIGHWeight ...more
Press Type Spot Welders
5 Results
100 KVA Lors #1100AP, press type spot welder, 4" stroke, 36" throat, 1.5" holder diameter, 3" arm diameter, 1989
Category: Press Type Spot Welders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Lors
Model: 1100AP
Year: 1989
100 KVA LORS PRESS TYPE SPOTWELDERMODEL 1100-AP… S/N 289-4045… NEW 1989 KVA. 100RATED CAPACITY.(2 PIECES COLD ROLL STEEL).165"RATED CAPACITY.(2 PIECES STAINLESS STEEL).110"VOLTAGE. 440SECONDARY VOLTAGE. 6.7MAXIMUM VOLTAGE. 10.0THROAT DEPTH.″0"MAXIMUM SHORT CIRCUIT.″0,000ELECTRO ...more
Machinery Values Inc has 4 more
listings in Press Type Spot Welders.
Amada #TEG-160E, punch & die grinder, 6.5" chk, 3-jaw, coolant, 7" wheel, 1.25" hole, stand, 1988
Category: Punch and Die Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Amada
Model: TEG-160E
Year: 1988
Amada Punch… Die Grinder Model: TEG160E… S/N: HH3317… NEW: 1988 7" Diameter Cup Wheel with 1-1/4" HoleTable Size:… 6" F-B x 8" L-R6-1/2"″-Jaw Chuck Manual Travel of Grinding Head Up… Down on″" Diameter… Column in.0005 GraduationsHead ...more
3' -9" Cincinnati Bickford #Super-Service, radial drill, 60-1200 RPM, power elevation
Category: Radial Drills
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cincinnati
Model: SUPER-SERVICE
3' X 9" CINCINNATI-BICKFORD RADIAL DRILLMODEL: SUPER SERVICE, S/N: 1R-3514, NEW: 1944 :DIAMETER OF COLUMN. 9"FACE OF COLUMN TO CENTER OF SPINDLE. 16-1/2"MINFACE OF COLUMN TO CENTER OF SPINDLE. 42"MAXSPINDLE TO BASE. 15-3/4"MINSPINDLE TO BASE. 53"MAXELEVATING HEIGHT OF ARM ON COLUMN. ...more
Machinery Values Inc has 4 more
listings in Radial Drills.
Ram (Die Sinker) EDM
2 Results
Chevalier #ED-252, sinker Electrical Discharge Machine, 23.6" x11.8" tbl., 2-Axis digital read out, 1992
Category: Ram (Die Sinker) EDM
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Chevalier
Model: ED-252
Year: 1992
CHEVALIER/SURE FIRST MADE IN TAIWAN RAM TYPE CONVENTIONAL EDM WITH DIGITAL READOUT DISPLAY **** ONLY 148 HOURS!!, HOLY COW!! **** MODEL: ED252… S/N: 0022145… NEW: 1992 TABLE DIMENSIONS. 23.6" X 11.8" X-TRAVEL. 11.8" Y-TRAVEL. 7.9" QUILL STROKE. 5.9" WORK TANK ...more
Machinery Values Inc has 1 more
listing in Ram (Die Sinker) EDM.
No. 3 Warner & Swasey #M-1200, ram type turret lathe, 15-3/8" swing, 10" 3-jaw chuck, 1-27/32" hole, 1954
Category: Ram Turret Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Warner & Swasey
Model: 3
Year: 1954
#3 W&S UNIVERSAL RAM-TYPE TURRET LATHE, MODEL M-1200, S/N 1338415, MFG: 1954 :… MAXIMUM SWING OVER BED. 15-3/8"MAXIMUM SWING OVER GUIDES. 13-1/4"MAXIMUM SWING OVER CROSS SLIDE. 7"BAR CAPACITY: ROUND. 1-1/2" SQUARE. 1-1/16" HEXAGONAL. 1-5/16"HOLE IN COLLET CHUCK PLUNGER. ...more
Reciprocating Surface Grinders - Horizontal Spindle
59 Results
6" x 12" Harig #612, hand feed surface grinder, Walker PMC, roller bearing table, Acu-Rite Qwikcount 2-Axis digital read out, 1993
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Harig
Model: 612
Year: 1993
6" X 12" HARIG (MADE IN USA)…"PRECISION" HAND FEED SURFACE GRINDER WITH…"ACU-RITE"…"QWIKCOUNT"2-AXIS DRO DISPLAY MODEL: 612… S/N: 19185… NEW: 1993 WIDTH AND LENGTH GROUND. 6" X 12" LONGITUDINAL TRAVEL. 12-3/4" CROSS FEED TRAVEL. ...more
Machinery Values Inc has 58 more
listings in Reciprocating Surface Grinders - Horizontal Spindle.
Reciprocating Surface Grinders - Vertical Spindle
1 Result
20" x 46" Medina #B, end grinder, swinging spindle surface grinder, 10" x15" PMC, #158674
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Medina
Model: B
Medina Model B End Grinder Grinding Capacity:… 1" T x 20" W x 46" LLength:… 2" T x 17-1/2" W x 46" LLength:… 3" T x 14-1/2" W x 46" LLength:… 4" T x 10-1/2" W x 46" LHeight from Floor To Face of Wheel:… 46"Chuck ...more
By George #CS4275, Circle Shear, 42" max. diameter, 2" diameter high-speed cutting wheels, 14-gauge mild steel, 18-gauge stainless steel, 10" head throat depth, 350 RPM, 110 V., 1976
Category: Ring and Circle Shears
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: CS4275
Year: 1976
42" x 14 GA. BY GEORGE CIRCLE SHEARMODEL CS-4275… S/N C27440… NEW 1976 MAX. CIRCLE DIAMETER. 42"MIN. CIRCLE DIAMETER. 2-7/8"CAPACITY IN MILD STEEL. 14 GA.CAPACITY IN STAINLESS. 18 GA.DEPTH OF HEAD THROAT. 10"DEPTH OF TAIL THROAT.″0-3/4"SPINDLE SPEED.″50 RPM :- BACK ...more
Machinery Values Inc has 1 more
listing in Ring and Circle Shears.
Baltec #RN-280, radial riveter, .5" capacity, 1990
Category: Riveters
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Baltec
Model: RN-280
Year: 1990
BALTEC RADIAL RIVETING MACHINEMODEL RN-280… S/N 27376… NEW 1990 SHANK DIAMETER. 1 - 12 mm RANGE (1010 STEEL).04 -.5" MAXIMUM DOWNFEED FORCE.″800 @ 88 psi PNEUMATIC STROKE LENGTH RANGE. 5 - 40 mm.2" - 1.57"TABLE SIZE. 12-5/8" X 12"MOTOR HP @ 1700 RPM.″/4 OPERATING ...more
Machinery Values Inc has 8 more
listings in Riveters.
7 Stand, Yoder #M1.5, 12" width, 16"-20" ID, 4" stroke, 2" adj., rollforming line, air clutch, #156253
Category: Rollformers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Yoder
Model: M1.5
7 STAND YODER M1.5 ROLL FORMING LINE CURRENTLY TOOLED FOR CABINET RACK INDUSTRY CONSISTING OF: 2500 LBS LITTEL UNCOILER CAPACITY - 2500 LBSWIDTH - 12" ID RANGE - 16"-20" 32 TON MINSTER #4 OBI PRE-PUNCH PRESS MODEL NUMBER - 4TONNAGE -″2STROKE - 4" SLIDE ADJUSTMENT - 2"AIR CLUTCHFLYWHEEL 7 ...more
Machinery Values Inc has 1 more
listing in Rollformers.
Rotary Screw Air Compressors (Positive Displacement)
1 Result
256 cfm, 185 psig, Atlas Copco #GA37 VSD, rotary screw air compressor, 50 HP, refrigerated dryer, 2007
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Atlas Copco
Model: GA37
Year: 2007
ATLAS COPCO ROTARY SCREW AIR COMPRESSORMODEL: GA37 VSD,… S/N: APL5744195, MFG: 2007 Operating Hours: 15,567 :MAX WORKING PRESSURE: 185 PSIGCAPACITY: 42 - 256 CFMAPPROXIMATE DIMENSIONS 80" x″6" x 72"HAPPROXIMATE WEIGHT: 2634 LBS :BUILT IN REFRIGERATED DRYERSOUND ENCLOSUREVARAIBLE SPEEDLARGE ...more
Rotary Table Surface Grinders - Horizontal Spindle
3 Results
Arter #H-30, horizontal spindle rotary surface grinder, 30" electromagnetic chuck, 10 HP spindle, 16" x 2" x 8" wheel, hydraulic OTW dresser, cooolant, 1972
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Arter
Model: H-30
Year: 1972
30" Arter…"Made in USA"Horizontal Spindle Rotary Surface Grinder Model No. H-30… S/N: 44-62… New: 1972 :Magnetic Chuck Diameter.″0"Swing Inside Guards - Maximum.″3"Work Height - Maximum. 10"Standard Wheel Size. 16" x 2" x 8"Wheel Head Stroke ...more
Machinery Values Inc has 2 more
listings in Rotary Table Surface Grinders - Horizontal Spindle.
Rotary Table Surface Grinders - Vertical Spindle
5 Results
Blanchard #22-42, Vertical Spindle Rotary Surface Grinder, 42" chuck, 48" swing, 22" grinding wheel diameter, 720 RPM, 50 HP, 1971
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Blanchard
Model: 22-42
Year: 1971
42" BLANCHARD ROTARY SURFACE GRINDER, WET BASE WITH SELF-CONTAINED COOLANT SYSTEM MODEL: #22-42… S/N: 13551… NEW:… 1971 CHUCK DIAMETER. 42"SWING INSIDE GUARDS. 48"VERTICAL RANGE UNDER NEW WHEEL. 24"MAXIMUM LOAD ON CHUCK.″,000 LBSGRINDING WHEEL DIAMETER. 22"GRINDING ...more
Machinery Values Inc has 4 more
listings in Rotary Table Surface Grinders - Vertical Spindle.
19.685" Tsudakoma #RBA-500R, 4-Axis, CNC rotary table, 7" hole, Fanuc, 2014, #158779
Category: Rotary Tables
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Tsudakoma
Model: RBA-500R
Year: 2014
TSUDAKOMA CNC ROTARY TABLEMODEL: RBA-500R, S/N: 110071,… NEW: 2014 TABLE DIAMETER. 19.685" (500mm)CENTER HEIGHT. 12.20" (310 mm)CENTER BORE THRU DIAMETER. 7.165" (182mm) :DUAL DISC HYDRAULIC CLAMPING MECHANISMBUILT-IN AIR/HYDRAULIC BOOSTER HYDRAULIC SUPPORT SPINDLE MOUNTED ON BASEPLATE INSPECT IN ...more
Machinery Values Inc has 1 more
listing in Rotary Tables.
Sheet Metal Beaders, Rollers and Crimpers
2 Results
22 gauge Roper-Whitney Pexto #3617, power crimping & beading, 13" throat, 2001
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Pexto
Model: 3617
Year: 2001
ROPER-WHITNEY (PEXTO)Power Crimping… Beading (Combination) MachineModel″617… S/N 1014-3-01… New 2001 Capacity, mild steel. 18 gaugeCapacity, stainless. 22 gaugeThroat depth. 13"Distance between centers.″"Roll speed. 40 R.P.M.Ratio gearing.″-1/2:1 :Capability of being ...more
Machinery Values Inc has 1 more
listing in Sheet Metal Beaders, Rollers and Crimpers.
Sheet Metal Box and Pan Brakes
2 Results
16 gauge x 4' Baileigh #BB-4816M, box & pan brake, magnetic clamp brake, foot pedal
Category: Sheet Metal Box and Pan Brakes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Baileigh
Model: BB-4816M
BAILEIGH MAGNETIC BOX AND PAN BRAKEMODEL BB-4816M… S/N 1905121… NEW 2020 Capacity (Mild Steel). 48" x 16 Ga.Bend angle:. 0-180 degreesClamping force. 6 tonMax. clamping bar lift (magnet). unlimitedBox depth. unlimitedPower requirements. 220V 1-phase :- Foot pedal- Magnetic clamping brake- Unlimited ...more
Machinery Values Inc has 1 more
listing in Sheet Metal Box and Pan Brakes.
Single Crank OBI Flywheel Press Machines
7 Results
5 Ton, Kenco #AG51-105-100, OBI gap frame mech.press, 1" stroke, 8" x 11-1/2" bed area, 9-1/2" Shut Height, 250 SPM, air clutch, 1993, #147255
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Kenco
Model: AG51-105-100
Year: 1993
5 TON KENCO GAP FRAME MECHANICAL PRESSMODEL AG51-105-100… S/N 93-898… NEW 1993 RATED CAPACITY. 5 TONS… STROKE. 1"… BED AREA. 8" X 11-1/2"SHUT HEIGHT. 9-1/2"… STROKES PER MINUTE. 250… :- AIR CLUTCH- AUTO LUBRICATOR.
Machinery Values Inc has 6 more
listings in Single Crank OBI Flywheel Press Machines.
Single Cranked Back Gear OBI Press Machines
1 Result
45 Ton, Danly #45, OBI press, 6" stroke, 10" die space, 2.5" adj., 28" x18" bed, 50 SPM, air clutch & brake, 1959, #154596
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Danly
Model: 45
Year: 1959
45 TON DANLY BACK GEARED OBI PRESS… MODEL 45… S/N 4550240159… CAPACITY. 45 TON… STROKE. 6"… SLIDE ADJUSTMENT. 2.5"… DIE SPACE ON BED (S.D.A.U.). 10"… BED AREA.(L-R X F-B). 28" X 18"SPM. 50… MACHINE DIMENSIONS. 48" X 80" X ...more
Single End Hydraulic Punch Machines
1 Result
44 Ton, Strippit #Super-750-SG/40, single stage punch press, Smart Gage PC Control, foot pedal, 1996
Category: Single End Hydraulic Punch Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Strippit
Model: SUPER-750-SG/40
Year: 1996
STRIPPIT 44 TON SINGLE STATION FABRICATOR WITH SMART GAGE PC CONTROLMODEL SUPER 750 SG/40… S/N 080022796… NEW 1996 Maximum material thickness.″75"Tonnage:. 40 metric (44 US Tons)Capacity. 1.25" dia. in.375" mild steel 2" dia. in.250" mild steel 3.5" dia. in.135" ...more
Single End Punch and Shear Machines
1 Result
12 Ton, Kidder #56BM-C, hydraulic punch press, 13/16" stroke, 2.5" throat, 5.25" open, 4-7/16" Shut Height
Category: Single End Punch and Shear Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Kidder
Model: 56BM-C
12 Ton Kidder Hydraulic PunchModel 56BM-C Capacity. 12 TonThroat Depth. 2-1/2 in.Stroke. 13/16 in.Opening. 5-1/4 in.Shut Height. 4-7/16 in.Cycle Time. 7.5 seconds Approx. Dims: 20" x 26" x 56" (l x w x h)Approx. Weight: 215 lbs. :- One person portability on heavy duty 10" ball bearing wheels - Twin ...more
26"/35" x 160" Kingston #HD-26160, engine lathe, 4-1/16"hole, D1-11, inch/metric, Trak 2-Axis digital read out, Steady Rest, 4-way toolpost, rapid traverse, 1997
Category: Sliding & Gap Bed Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Kingston
Model: HD-26160
Year: 1997
26"/35" X 160" KINGSTON GAP BED ENGINE LATHEMODEL: HD26160,… S/N: CH97626,… YEAR: 1997 :SWING OVER BED. 26"SWING OVER CROSS SLIDE. 17-1/2"SWING IN REMOVABLE GAP.″5-1/8"SPINDLE NOSE CAMLOCK. D1-11"HOLE THROUGH SPINDLE. 4-1/16"DISTANCE BETWEEN CENTERS. ...more
10 gauge x 5' Webb #2L, plate bending roll, 5" roll diameter, foot switch
Category: Slip Rolls
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Webb
Model: 2L
5' X 10 GAUGE MECH. WEBB BENDING ROLLMODEL 2L… S/N 505 BENDING LENGTH. 62"MAXIMUM CAPACITY. 10 Ga.ROLL DIAMETER. 5" :- Hand crank at the end of the machine for raising the top roll when removing rolled material- Manual adjustment of lower front pinch roll- Manual adjustment of rear forming ...more
Machinery Values Inc has 1 more
listing in Slip Rolls.
Small Hole EDM Drilling Machine
1 Result
Current Electrical Discharge Machine #CT300, CNC hole Electrical Discharge Machine, 12" X, 8" Y, 12" Z, 57 Amps, 1998
Category: Small Hole EDM Drilling Machine
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Current
Model: CT300
Year: 1998
CURRENT (Made in Japan) "High Accuracy" CNC EDM Hole Driller Model: CT300… S/N: 84120… Year: 1998 X-axis travel″00 mm (12") Y-axis travel 200 mm (8") Z-axis travel″00 mm (12") Guide axis travel (G-axis) 250 mm (10") Throat distance (min) 10 mm (0.4") Throat ...more
Steel Slat and Chip Conveyors
1 Result
17.5" x 115" Nakamura -Tome, chip conveyor, From a SC-150
Category: Steel Slat and Chip Conveyors
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Nakamura
NAKAMURA TOME CHIP CONVEYOR FROM A TMC-20NEW: 1999 OVERALL DIMENSIONS: 115"L X 24"W X 62"HFLAT LENGTH: 71-1/2"FLAT WIDTH: 17-1/2".
No. 211 Torrington, rotary swager, 0.1875" diameter, 2013
Category: Swaging Machines (Swagers)
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Torrington
Model: 211
Year: 2013
TORRINGTON ROTARY SWAGING MACHINEMODEL 211… S/N 10196… NEW 2013 Cap., Solid Work (60,000 PSI Material).″/16"Cap., Tubing. 1/2"Longest possible Taper in One Operation. 1-7/16"Motor HP.″/4 Dimension: 24" x 24" x 50"Weight: 700 lbs. Approx. 480 v /″ Ph / 60 Hz ...more
Swiss Type and Lathe CNC Automatic Screw Machines
10 Results
Citizen #K16VIIP, CNC swiss type lathe, .63" diameter, 7.87" length, Fanuc FS31i, LNS Express 220 magazine barfeed, 2005
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Citizen
Model: K16VIIP
Year: 2005
CITIZEN MODEL: K16 TYPE VIIP SWISS TYPE CNC LATHENEW: 2005 for OEM Brochure (All should be confirmed by buyer) Control:… Fanuc FS31iMax. Machining Diameter:… 16 mm (.63")Max. Machining Length:… 200 mm (7.87")Max. Front Drilling Diameter:… 10 mm (.39")Max. Front Tapping ...more
Machinery Values Inc has 9 more
listings in Swiss Type and Lathe CNC Automatic Screw Machines.
Delta, woodworking table saw, 16" blade, tilting arbor, 1993
Category: Table Saws
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Delta
Year: 1993
16" DELTA TILTING ARBOR UNISAWMODEL: 450, S/N: DP5906, MFG: 1993 :BLADE CAPACITY. 16" MAXCAST IRON TABLE. 43" X 49"SAW ARBOR DIMENSION. 1"BLADE ARBOR TILT. 0° - 45°APPROXIMATE WEIGHT. 1,000 LBSAPPROXIMATE DIMENSIONS. 7'L x 4'W x 4'H :TILTING ARBORMITER GAUGEFENCECUSTOM ...more
Tool and Cutter Grinders
20 Results
Cincinnati Milacron #2MT, universal tool & cutter grinder, 6" x 36" table, tilting wheelhead, radius attachment, tailstock, 1978
Category: Tool and Cutter Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cincinnati Milacron
Model: 2MT
Year: 1978
NO. 2 CINCINNATI-MILACRON UNIVERSAL TOOL… CUTTER GRINDER MODEL: MT… S/N: F-4984-E-79-05-36… NEW: 1978 CAPACITY:SWING OVER TABLE DIAMETER. 10" LENGTH, BETWEEN RIGHT… LEFT-HAND TAILSTOCKS. 27" LENGTH, BETWEEN TAILSTOCK… WORKHEAD. 21-1/2" FACE MILLS ON WORKHEAD DIAMETER. ...more
Machinery Values Inc has 19 more
listings in Tool and Cutter Grinders.
Toshiba, set of 8-tool holders for boring mill tooling, #50 taper, #158510
Category: Tool Holders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Toshiba
SET OF 8 TOSHIBA 50 TAPER TOOLHOLDERS INSPECT IN OUR NEW JERSEY WAREHOUSE (1)Tecnara FM60-BS115-63.5-250(1)Tecnara FM60-BA110-400(1)Tecnara FM60-BA110-300(1)Tecnara FM60-BA110-100(3)Tecnara FM60-CMT7-400.
1" Wauseon #1003-HY, Hydraulic Tube End Forming Machine, 8.2-ton ram force, 3.25" bore, 3" stroke, 40-gallon reservoir, 7.5 HP, 1800 RPM, 15 GPM-2000 psi piston pump, 220/440 V.
Category: Tube End Formers
Seller: Machinery Values Inc
Location: Harrison, NJ
Model: 1003-HY
WAUSEON HYDRAULIC END FORMING MACHINEMODEL 1003 HY… S/N B71019-20 CAPACITY. 1"RAM CYLINDER (HYD).″-1/4" BORE X″" STROKEMAXIMUM RAM FORCE. 8.2 TONSCLAMP CYLINDER (AIR). 14.5 TONS DURING LOCKUPSHUTTLE CYLINDER (AIR).″-1/4" BOREHYDRAULIC POWER UNIT. 40 GALLON RESERVOIR 15 GPM ...more
Crest #C0C4-10161, fully automatic cleanline 6-sta. ultrasonic cleaner, (4) 10" W x 14" x 14" H tank, Allen-Bradely Panelview 550, 2011
Category: Ultrasonic Parts Washers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Crest
Model: C0C4-10161
Year: 2011
CREST FULLY-AUTOMATIC 6- STATION, 4-TANK ULTRASONIC PARTS CLEANING SYTEM, MODEL COC4-1016, WITH AB PLC CONTROL, ROBOTIC TRANSFERNEW: 2011 : FULL ENCLOSURE2 HEPA FILTERS FOR ENCLOSURE, UNLOAD AND WET TANKSCONTROL CABINET WITH AB PANELVIEW 550 PLC CONTROLBASKET ROBOTIC TRANSFER, Mdl CTS250 (25 lbs LOAD MAX)Ultrasonics ...more
Ultrasonic Welders
1 Result
Dukane #220, ultrasonic welder w/ dynam, 2005
Category: Ultrasonic Welders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Dukane
Model: 220
Year: 2005
DUKANE 220 ULTRASONIC WELDER w/2220 DYNAMIC PROCESS CONTROLLERNew: 2005.
Uncoilers and Centering Coil Reels
20 Results
1200 lb. Cooper Weymouth #A-1200, non-motorized uncoiler, 18" width, 48" outside dimensions, 14"-20" ID, keepers, adj. electric brake, manual expansion
Category: Uncoilers and Centering Coil Reels
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Cooper Weymouth
Model: A-1200
1,200 LB. CWP NON-MOTORIZED UNCOILERMODEL… A-1200… S/N A1200-… COIL CAPACITY. 1,200#… WIDTH. 18"… MINIMUM/MAXIMUM I.D. 14"-20"… MAXIMUM O.D. 48" :- KEEPERS- ADJUSTABLE ELECTRIC BRAKE- MANUAL EXPANSION.
Machinery Values Inc has 19 more
listings in Uncoilers and Centering Coil Reels.
Universal Cylindrical Grinding Machines
39 Results
5" x 12" Myford #MG12-HPM, hydraulic cylindrical grinder, 12" x 1-1/2" x 5" wheel, hydraulic table traverse, automatic infeed, plunge, coolant, angular dresser, 1982
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Myford
Model: MG12-HPM
Year: 1982
5" X 12" MYFORD HIGH-PRECISION HYDRAULIC CYLINDRICAL GRINDER ** SWING DOWN I.D. ATTACHMENT AVAILABLE ** MODEL: MG12-HPM… S/N: HPM-153539… NEW: 1982 MAXIMUM GRINDING DIAMETER.″"SWING OVER TABLE. 5" CAPACITY BETWEEN CENTERS. 12" MAXIMUM TABLE TRAVEL. 13-3/4" TABLE ...more
Machinery Values Inc has 38 more
listings in Universal Cylindrical Grinding Machines.
Universal Milling Machine - Horizontal
2 Results
Burke #4, plain horizontal mill, 3-3/4" x 16" table, 66-2875 RPM, 1/2 HP motor, 1997
Category: Universal Milling Machine - Horizontal
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Burke
Model: 4
Year: 1997
D.C. MORRISON / BURKE NO. 4 PLAIN MILLING MACHINEMODEL: NO. 4, S/N: B-9731-M, MFG: 1997 :WORKING SURFACE OF TABLE:.″″/4" X 16"LONGITUDINAL FEED:. 8"TRAVERSE FEED:. 3"VERTICAL FEED:. 8"MAX. DISTANCE BETWEEN CENTER -OF SPINDLE AND TABLE:. 8"WIDTH OF T-SLOT:. 1/2"SPINDLE ...more
Machinery Values Inc has 1 more
listing in Universal Milling Machine - Horizontal.
Vertical Band Saws
12 Results
18" x 10" MSC #09514639, vertical band saw, 5/8" x 140" blade, 82-384 FPM, 20" x22" table, blade welder & grinder, work light
Category: Vertical Band Saws
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Msc
Model: 09514639
18" MSC VERTICAL BAND SAW MODEL: 09514639, S/N: 2146721 :THROAT,… BAND TO COLUMN. 18" MAXIMUM WORK HEIGHT. 10" BAND WIDTH CAPACITY. 1/8" - 5/8" SAW BAND LENGTH. 140" BAND SPEED RANGE VARIABLE. 82 TO″84 FPMTABLE SIZE. 20" X 22" TABLE TILTS. 15 DEGREES LEFT, 15 ...more
Machinery Values Inc has 11 more
listings in Vertical Band Saws.
Vertical CNC Machining Centers
14 Results
Chevalier #Falcon-2033, CNC vertical machining center, 20 automatic tool changer, 33.5" X, 19.7" Y, 19.7" Z, 8000 RPM, #40, 15 HP, Fanuc O-MC, 39.4" x17.7" table, rigid tap, 2003
Category: Vertical CNC Machining Centers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Chevalier
Model: FALCON-2033
Year: 2003
CHEVALIER VERTICAL MACHINING CENTERMODEL: FALCON-2033, S/N: 875A07, YEAR: 2003 :X-AXIS TRAVEL.″3.5"… Y-AXIS TRAVEL. 19.7"Z-AXIS TRAVEL. 19.7"TABLE SIZE.″9.4" X 17.7"MAXIMUM TABLE LOAD. 1100 LBS / 500 kg… SPINDLE NOSE TO TABLE TOP. 5.9" - 25.6" SPINDLE MOTOR. ...more
Machinery Values Inc has 13 more
listings in Vertical CNC Machining Centers.
Vertical Universal Grinders
1 Result
Deckel #S11 (ISOG), microscope video, radius, spiral relief, motor drive, 2000, #158706
Category: Vertical Universal Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Deckel
Model: S11
Year: 2000
DECKEL (ISOG) UNIVERSAL TOOL… CUTTER GRINDER ** ADJUSTABLE THROUGH″60 DEG. IN 5 AXES ** ** MACHINE COMES WITH MANY ACCESSORIES ** TYPE: S11 SPEED… S/N: 2147… NEW: 2000 WORTABLE LONGITUDINAL TRAVEL. 7.5"WORKTABLE CROSS TRAVEL. 4"SPINDLE, VERTICAL TRAVEL. 13"SPINDLE AXIAL FEED. ...more
Vibratory Finishers
4 Results
5 cu.ft. Almco #0R-5C, 40" round bowl, Control panel w/ timer vibratory finisher, sound enclosure, removable partitions, 1998
Category: Vibratory Finishers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Almco
Model: 0R-5C
Year: 1998
5 Cu.Ft. ALMCO BOWL TYPE VIBRATORY FINISHER MODEL: OR-5C… S/N: 089811… NEW: 1998… :… 5 Cu.Ft. CAPACITY 40" BOWL DIAMETER MAX. LOAD CAPACITY:… 1,500 LBS. TUB CROSS-SECTION 10" PROCESS CHANNEL WIDTH OF 12"… APPROX. DIMENSIONS OF 61"L-R x 44.5"D X ...more
Machinery Values Inc has 3 more
listings in Vibratory Finishers.
Welding Positioners
3 Results
1000 lb. Ransome #10-P, Welding Positioner, 30" diameter Table, 460 V., 1969
Category: Welding Positioners
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Ransome
Model: 10-P
Year: 1969
1,000 LB. RANSOME WELDING POSITIONERMODEL 10-P… S/N 149128… YEAR 1969 Capacity. 1,000 lbsRotation torque. 6,000 in. lbs.Tilt Torque. 13,125 in. lbsTable diameter.″0"Table RPM min. 0.5Table RPM max. 2Tilt range. 0 - 135 degreesVertical height adjustment. 18" (powered)Motor. 230 / 460 ...more
Machinery Values Inc has 2 more
listings in Welding Positioners.
4' L x 3.37' width x 2.36" FPM, Welding Table
Category: Welding Table
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Fpm
NEW″' x 5' Cast Iron Welding Table :Platen Material - Cast IronLength - 59.06" (1,500 mm)Width -″9.37" (1,000 mm)Platen Height -″.94" (100 mm)Height w/ Stand -″2.05" (814 mm)Platen Ledge Thickness - 2.36" (60 mm)Platen Holes - 1.75" Square (45 mm)Hole ...more
Opti-Dress #E, wheel dresser, 12" wheel diameter, refurbished
Category: Wheel Dressing Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Opti-Dress
Model: E
"OPTI-DRESS" E FORM WHEEL DRESSER" "REFURBISHED BY…"PRECISION INT'L", THE USA REP. FOR OPTI-DRESS" (MADE BY PG TECHNOLOGY IN GREAT BRITIAN) MODEL: E… S/N: 7112175… OverviewThe Optidress E Form Wheel Dresser easily mounts to your surface grinder — ...more
Wire EDM Machine
1 Result
Hansvedt / Hardinge #DS-2, CNC wire Electrical Discharge Machine, 6.5" X, 10.5" Y, 6" Z, 2.75" diameter pinch roller, 1989, #161354
Category: Wire EDM Machine
Seller: Machinery Values Inc
Location: Indiana, IN
Mfr: Hansvedt
Model: DS-2
Year: 1989
Hansvedt/Hardinge Model #DS-2 CNC Wire EDM S/N: AJ09121… New:… 1989 :Max. Workpiece Dimension… 18" x 27" Travels:X:… 6.5"Y:… 10.5"Z:… 6" Max ThicknessPositioning Accuracy… +/-.0002" Max. Workpiece Weight… 300 Lbs.Wire Diameter ...more
No. ML1 Torrington, Spring Coiler, 0.01" - .072" diameter wire, #143598
Category: Wire Spring Coilers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Torrington
Model: ML1
No. ML1 TORRINGTON SPRING LOOPER, WIRE DIAMETER. MIN.010".25mm+, MAX.072" 1.8mm+, SPRING O.D. MIN.110" 2.8mm+, MAX.750" 19.1mm+, SPRING LENGTH. MIN.312" 8mm+, MAX 5" 127mm HAND FEEDER.
Wire Torsion Spring Coilers
1 Result
No. 721 Sleeper & Hartley, spring coil, .018"-.080" wire range, 0-145" wire feed range, 300 SPM, #143600
Category: Wire Torsion Spring Coilers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Sleeper & Hartley
Model: 721
SERIES 721, SLEEPER… HARTLEY SPRING COILER, WIRE RANGE.018" TO.080", STANDARD GROOVING.024 -.038.056 -.080, BASIC WIRE FEED RANGE. 0 TO 145", COIL RANGE. 1/8" TO 1-1/2" I.D., PRODUCTION. UP TO″00 SPM \, AUTOMATIC CYCLING EXTENDS WIRE FEED RANGE TO 1026", MANUAL CUTTER CONTROL FOR CONTINUOUS COILING, 5 ...more
16" Grizzly #G9953ZX, jointer woodworking, 6 row spiral cutterhead, 99" x16.25" tbl., 2002
Category: Woodworking Jointers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Grizzly
Model: G9953ZX
Year: 2002
16" GRIZZLY JOINTER w/SPIRAL CUTTERHEAD MODEL: G9953ZX, S/N: 00514, MFG: 2002 :TABLE SIZE. 99" x 16-1/4"MAXIMUM WIDTH OF CUT. 16"MAXIMUM DEPTH OF CUT. 5/16"CUTTER HEAD DIAMETER. 4"BEVEL JOITING. 0 - 45°FENCE SIZE. 6-5/8" x 43-1/4"CUTTER HEAD SPEED. 5,000 RPMOVERALL ...more
24" x 9" Delta #RC63-63N, woodworking planer, 25" x 35" table, 20-60 FPM, spiral / helical cutting head, power table, 15 HP, 1988
Category: Woodworking Planers
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Delta
Model: RC63-63N
Year: 1988
24" DELTA WOODWORKING PLANERMODEL: RC63-63N,… S/N: 233,… MFG: 1988 :WIDTH. 24"HEIGHT / THICKNESS. 9"REMOVAL OF MATERIAL IN SINGLE PASS. 5/16"CUTTERHEAD SPEED. 5,000 RPMFEED SPEED VARIABLE. 20 - 60 FPMTABLE SIZE. 25" x″5"APPROXIMATE MACHINE WEIGHT…. 2,000 LBS ...more
