CNC Press Brakes

Make: Premier, Model: 425, Year: 1998, Machine Location: Connecticut, Control: Hurco Autobend 7, Tonnage Capacity: 25, Bed and Ram Length: 4′, Distance Between Housings: 30″, Ram Approach Speed: 235 IPM, Bending Speed(s): 24 IPM, Ram Return Speed: 240 IPM, Programmable Controlled Axes: 1, Programmable ...more

Year: 1998, Make: Premier, Model: 425.2R, Tonnage: 25 Tons, Overall Length: 4', Between Housing: 30", Stroke: 4", Open Height: 10.5", Throat Depth: 4", Weight: 3,300lbs, Dimensions: 5' x 4' x 7'H, Hurco Autobend 7 CNC control, Full Set of Punch holders, Foot Pedal, Misc Tooling ...more

Make: Toyokoki, Model: APB-286, Year: 1900, Machine Location: California, Servo Electric Press Brake, Tonnage Capacity: 28 Tons, Length of Ram: 23.6", Length of Bed: 30.7", Distance Between Housings: 28.2", Stroke Length: 3.94", Open Height: 13.2", Shut Height: 9.3", Electrical: 240V/3PH, Approx. Shipping Weight: ...more

Maximum Capacity. 35 Ton Overall Bending Length. 5 ft Between Housing Length. 43.3 in Adj. Stroke. 4 in Max. Open Height. 14.57 in Throat Depth. 9.85 in Includes: Hurco 2.Axis CNC Back Gauge Variable Speed and Stroke Adjustment Full Length Treadle Adj. Punch Holders For American & European Style Tooling ...more

Make: BMT, Model: PRB-X 1030, Year: 2022, Machine Location: Utah, Bending Force: 33-Tons, Bending Length: 43.3", Max Stroke: 8.6", Max Daylight without tools: 17.3", Approach Speed: 6.3 IPS, Bending Speed:.4 IPS, Return Speed: 6.3 IPS, Travel in X-axis: 15.7", Dimensions: 90″L x 75″W x 90"H, Weight: ...more

35 Ton X 6' Hydraulic Press Brake with Hurco Autobend 6 Control Two Axis Back Gauge, Sectional Ram Die Clamps (10 Universal Die Adapters), Push Buttons for Start - Stop, Key Selector Switch for Inch - Single Stroke Auto, Manual Return, Tonnage Control and Indicator, Capacity: 35 Tons, Overall Bending Length: 78" ...more

Used PACIFIC / TRI-ACRO HYDRA-MECHANICAL BRAKE w/ CNC BACK GAUGEMODEL 35-6, NEW 1990, CAPACITY. 6' X 14 GA. 4' X 12 GA. 34" X 10 GA.TONNAGE. 35 TONSPUNCHING CAPACITY. 23.31 TONSOVERALL BED LENGTH. 72" DISTANCE BETWEEN HOUSINGS. 62" STROKE LENGTH. 2" RAM ADJUSTMENT. 3" SHUT HEIGHT. 9" THROAT DEPTH. 9" ...more

Year Built - Estimated 1989, Serial No. 150 05 89, Tonnage.35, Overall Bending Length.80.7", Distance Between Housings.61", Capacity (MS).72" x 12 GA, Throat Depth.9.84", Ram Stroke.3.5", Daylight.9.45", Ram Speeds:, - Downstroke.1.97"/sec. (50 mm/sec.), - Work.0.47"/sec. (12 mm/sec.), - Upstroke.2.95"/sec. (75 ...more

Product Chicago Model 68-B Mechanical Press Brake 36 Ton, Serial # 10422, Capacity – 8′ of 14ga Mild Steel on a 5/8″ Die, Bed Length – 8′, a AutoGage CNC 99 Single Axis Back Gauge, Wired 230/460 3ph, Dies not included..

CAPACITY: Press Force 36 Ton Bending Length 40.15" Throat Depth 5.9" Stroke 4.72" Usable Open Height 11.81" Rapid Ram Speed 8.7 Inches/Sec. Max. Working Speed.98" Inches/Sec. Machine Weight 5,733 Lbs., Tasc 6000 CNC Control w/ Operator Swivel Unit Graphic Workshop Programming (6) Axis Back Gauge Hydraulic Tool Clamps ...more

Year: 1999, Make: Amada, Model: RG-3512LD, Tonnage: 38 Tons, Overall Length: 47.2", Between Housing: 40.2", Stroke: 3.94", Open Height: 14.57", Throat Depth: 7.9", Weight: 3,900lbs, Dimensions: 58" x 59" x 77", LD Control, 2 Finger Assemblies, Full set of Punch Holders ...more

Year: 1998, Make: Amada, Model: RG-35S, Tonnage: 38 Tons, Overall Length: 47.3", Between Housing: 40.2", Stroke: 3.94", Open Height: 14.57", Throat Depth: 7.88", Weight: 3,900lbs, Dimensions: 5' x 4' x 7'H, NC9-EXii, Foot Treadle, Laser Safety Curtains, Remote Hand Wheel, Misc. ...more

38 Ton X 5’ CNC Hydraulic Press Brake with Autogauge CNC 1000 Controls and Autogauge G24 Heavy Duty Backgauge, Nominal rated capacity: 38.5 Tons, Overall length of bed and ram: 60", Distance between housings: 48" (approx.), Length of stroke: 0" to 3.93" (variable), Open height: 11.8", Depth of throat: 9.8" ...more

CAPACITY: 38.5 TONS, LENGTH OF BED and RAM: 49", DISTANCE BETWEEN HOUSINGS: 40", RAM STROKE: 0-3.94", OPEN HEIGHT: 14.58", THROAT DEPTH: 7.88", RAM SPEEDS:, -- APPROACH: 29 IPM, -- FORMING: 22 IPM, -- RETURN: 94 IPM, CONTROL MEMORY CAPACITY: 99 STEPS, DIMENSIONS: 55"(L) x 42"(W) x 78"(H), MACHINE WEIGHT: 3,600 LBS. ...more

Stroke Length 5.906, Open Height 11.024, Table Length 49.606, Frame Gap 3.937, Maximum Approach Speed 3.937 / S, Inertial descent to stop approach motion.433, Total time required to stop approach motion 140, Backgauge Movable Range 19.685, All related Dies per photos, 4-Axis CNC Control, Approx. 7000 Lbs..

INV 7324, Fresh surplus from a large shop where this was being underutilized. They needed the floor space more than the machine. Inspect in person at our Savage, MN location. We can load. There is extra tooling for the back gauge and one missing upper die holder segment., Premier 540 5' 40 Ton Press Brake with Hurco ...more

TASC 6000 CNC CONTROL W/ OPERATOR SWIVEL UNIT, (6) AXIS BACK GAUGE, HYDRAULIC TOOL CLAMPS, LED WORK AREA LIGHTING FRONT & REAR, COMFORT SUPPORT TABLE, COMFORT FOOT REST, LASER SAFETY CURTAINS, CAPACITY:, PRESS FORCE 36 TON, BENDING LENGTH 40.15", THROAT DEPTH 5.9", STROKE 4.72", USABLE OPEN HEIGHT 11.81", RAPID ...more

Compact, fast, ergonomic, electric press brake, ideal for machining small complex sheet metal parts, EG-4010 is a compact, precise, electric and ergonomic press brake that is the exclusive "DSP" (Dual Servo Press). The machine is extremely fast, reactive and dynamic and offers shorter cycle times, more parts per hour ...more

*ER Touch Screen Controller, *3 Axis Machine - X on Back Gauge, Y1 and Y2 on the Ram*AKAS Laser Safety System*Universal Quick Release Punch Holders*Riser Block for US Dies*Tooling Package including 4-way Bottom Die and Top Punch*Double Foot Pedal*Rear Guard & Switch*Available Books & Manuals, Manufacturer ...more

Tonnage 44US Tons, Bending Length 39.4 Inches, Distance Between Housings 31.5 Inches, Stroke 3.9 Inches, Daylight (Open Height) 12.1 Inches, Throat Depth 9.8 Inches, Table Height 31.5 Inches, Table Width 3.5 Inches, Approach Speed 258 IPM, Bending Speed 24 IPM, Return Speed 246 IPM, Back Gauge Travel (X Axis) 19.7 ...more

Tonnage 44US Tons, Bending Length 39.4 Inches, Distance Between Housings 31.5 Inches, Stroke 3.9 Inches, Daylight (Open Height) 12.1 Inches, Throat Depth 9.8 Inches, Table Height 31.5 Inches, Table Width 3.5 Inches, Approach Speed 258 IPM, Bending Speed 24 IPM, Return Speed 246 IPM, Back Gauge Travel (X Axis) 19.7 ...more

Year: 2020, Make: US Industrial, Model: US446, Tonnage: 44 Tons, Overall Length: 72", Ram Travel: 3.93", Weight: 7,700lbs, Dimensions: 101" x 60" x 80"H, CNC 2-axis control, Foot Pedal, Misc Punch Holders, *Personal inspection of all equipment is highly encouraged*, **Sold As-Is, Where-Is with ...more