Popular Manufacturers in Wire EDM Machine
1 - 50 of 108 listings
Accutex #AU-9i, 35.4x23.6x11.8" trvls, CNC Control, AWT, non-submerged, +/-45 taper, chiller, large spl, 2017, #0774
Hitech Machinery Sales Inc | St. Charles, IL | Bill Raye |
Category: Wire EDM Machine
Seller: Hitech Machinery Sales Inc
Location: St. Charles, IL
Mfr: Accutex
Model: AU-9I
Year: 2017
s of the Accutex AU-9i Wire EDM, * Meehanite cast honeycomb-type base, highly-ribbed column, * 1.260 inch dia. C1 class ball screws, * ACservomotors, * 4 millionths linear glass scale ...more
Accutex #AU-500i, CNC Electrical Discharge Machine, 22" X, 14.1" Y, 11.7" Z, automatic thread, submerged, 2006
Asset Exchange Corporation | Elk Grove Village, IL | Gregg/Mark |
Category: Wire EDM Machine
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Accutex
Model: AU-500I
Year: 2006
Accutex #SP-9i, 36 x 20 x 12" travels, flusher, AWT, glass scales, +/- 22 taper, chiller, large spool, MDI, RS232C, LAN, USB, 2010
EDM Network Inc | Sugar Grove, IL | Ron Vogel |
Category: Wire EDM Machine
Seller: EDM Network Inc
Location: Sugar Grove, IL
Mfr: Accutex
Model: SP-9I
Year: 2010
Agie Charmilles #AC-Classic-V2, Wire Electrical Discharge Machine, 13.77" X, 9.84" Y, 10" Z, 2007
Superior Machinery | Burt, MI | Keith McKay |
Category: Wire EDM Machine
Seller: Superior Machinery
Location: Burt, MI
Mfr: Agie
Model: AC-CLASSIC-V2
Year: 2007
Table:, Maximum Table Load (with bath / without bath): 450 / 992" LbsX-Logitudinal: 13.77"Y-Cross: 9.84"Z-Vertical: 10"Taper U-V Travel: +/- 2.7"Taper capacity: 30 degrees / 3.93", Wire: ...more
Agie #Agiecut 100, Automatic Wire Threading, Starttron unit for starter holes, Clamping system, Agiematic Control, 1987
Superior Machinery | Burt, MI | Keith McKay |
Category: Wire EDM Machine
Seller: Superior Machinery
Location: Burt, MI
Mfr: Agie
Model: AGIECUT 100
Year: 1987
, Automatic Wire ThreadingStarttron unit for starter holesClamping systemExtra never used power supply still in the shipping crateIt is in very good conditionOnly ran one job on the unit ...more
Get email updates for newly added Wire EDM Machine
Agie #Agiecut-AC-Classic-2, X-350mm, Y-250mm, Z-256mm, 0.2-.33mm diameter, chiller, #80211
Smith Machinery Co | Ames, IA | Jim Smith |
Category: Wire EDM Machine
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Agie
Model: AGIECUT-AC-CLASSIC-2
Year: 2001
EQUIPMENT DIMENSIONS ---------------- 65" X 80" X 87", WEIGHT OF EQUIPMENT ----------------- 5,910 LBS, RUN HOURS --------------------------- 522, UTILITIES:, RATED LINE POWER ...more
Agie #Classic-2S, 13.7x9.8x10" trvls, Agievision 4 Control, submerged, Agiejet AWT, 28" sq/hr max cut speed, 2006, #0838
Hitech Machinery Sales Inc | St. Charles, IL | Bill Raye |
Category: Wire EDM Machine
Seller: Hitech Machinery Sales Inc
Location: St. Charles, IL
Mfr: Agie
Model: CLASSIC-2S
Year: 2006
Agie is the premier manufacturer of electrical discharge machining systems and are partners to the best EDM shops in the world -- with over 15,000 users and an installed base of 40,000 ...more
Agie #Classic-II, Wire Electrical Discharge Machine, 13.7" X, 9.8" Y, 10" Z, 0.006" to 0.013" wire diameter, underpower, 2002
Superior Machinery | Burt, MI | Keith McKay |
Category: Wire EDM Machine
Seller: Superior Machinery
Location: Burt, MI
Mfr: Agie
Model: CLASSIC-II
Year: 2002
Travels:, X-Logitudinal: 13.7"Y-Cross: 9.8"Z-Vertical: 10"Taper U-V Travel: +/- 2.75"Taper capacity: 0 to 30 DegreesRated Cutting Speed: 28 Sq In / Hr, Wire:, Wire Diameter Range: 0.006" to ...more
Agie Charmilles #Cut-20, wire Electrical Discharge Machine, 13.78" X, 9.84" Y, 9.84" Z, submerged cutting, 2008
ACT Machinery | Fullerton, CA | Randy Goodman |
Category: Wire EDM Machine
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Agie
Model: CUT-20
Year: 2008
, Max. Workpiece Dimensions32.28" x 26.77" x 9.84" Table Size27.55" x 18.89" Max. Workpiece Weight882 poundsMachining Stroke ( X, Y, Z )13.78" x 9.84" x ...more
Agie Charmilles #Cut-20, 13" X, 9.8", 9.8" Z, Charmilles Control, submerged cutting, automatic thread, chiller, 2008
Zimmerman-McDonald Machinery Inc | Saint Louis, MO | Brad Zimmerman |
Category: Wire EDM Machine
Seller: Zimmerman-McDonald Machinery Inc
Location: Saint Louis, MO
Mfr: Agie
Model: CUT-20
Year: 2008
Agie Charmilles CUT20 Wire EDM Machine, Manufactured 2008, Maximum Workpiece Dimensions – 32.28” x 26.77 x 9.84”, Table Size – 27.5” x 18.8”, Maximum ...more
Agie Charmilles #Cut-20P, wire Electrical Discharge Machine, 13.78" X, 9.84" Y, 9.84" Z, 52 gallon tank, Windows explosion proof Pentium, 2010
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL | Glenn Gray |
Category: Wire EDM Machine
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Agie
Model: CUT-20P
Year: 2010
, TANK SIZE 41" x 30" x 22", TANK CAPACITY 52 Gal Clean/158 Gal Dirty, TABLE DIMENSIONS 27 " x 18", MAX PART SIZE 35" x 26" x 9", MAX PART WEIGHT 882 ...more
Agie Charmilles #Cut-20P, Wire Electrical Discharge Machine, 13.8" X, 9.8" Y, 9.8" Z, automatic threading, 2011
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Wire EDM Machine
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Agie
Model: CUT-20P
Year: 2011
13.8" X 9.8" X 9.8" Wire EDM with Charmilles CNC Control, Anti - Collision Protection, Submerged Machining and Chiller., X - Axis Travel: 13.8", Y - Axis Travel: ...more
Agie Charmilles #Cut-30P, Electrical Discharge Machine, 23.6" X, 15.7" Y, 13.75" Z, submerged, automatic threading, 2014
Machinery Network Inc | Encino, CA | Sales Dept. |
Category: Wire EDM Machine
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Agie
Model: CUT-30P
Year: 2014
2014 AGIECHARMILLES CUT 30P, X-Axis Travel. 23.6", Y-Axis Travel. 15.7", Z-Axis Travel. 13.75", Taper. +/- 2.24", Work tank dimensions. 37.4" x 24.8", Max. workpiece dimensions. 40.5" x ...more
Agie Charmilles #Cut-E-600, wire Electrical Discharge Machine, 23.62" X, 15.75" Y, 13.78" Z, 2016
Tramar Industries Inc | Novi, MI | Mauro Damino |
Category: Wire EDM Machine
Seller: Tramar Industries Inc
Location: Novi, MI
Mfr: Agie
Model: CUT-E-600
Year: 2016
CNC Control yes Type of CNC Control 19" Touch Screen X-Axis Travel 23.62 inches Y-Axis Travel 15.75 inches Z-Axis Travel 13.78 inches U/V Travel +/- 1.97" Max Workpiece Size 40.55" x 31.5" ...more
Agie Charmilles #Cut-E-600, CNC wire Electrical Discharge Machine, 19" touch screen, 23.62" X, 15.75" Y, 13.78" Z, 2016
HGR Industrial Surplus | Euclid, OH | Sales Rep. |
Category: Wire EDM Machine
Seller: HGR Industrial Surplus
Location: Detroit, MI
Mfr: Agie
Model: CUT-E-600
Year: 2016
19" Touch Screen, 23.62" X-axis, 15.75" Y-axis, 13.78" Z-axis, Located In Novi Michigan.
Agie Charmilles #Progress-Focus-2, 13.77" x 9.84" x10" trvls, AWT, submerged, 28" sq/hr, 2012, #0825
Hitech Machinery Sales Inc | St. Charles, IL | Bill Raye |
Category: Wire EDM Machine
Seller: Hitech Machinery Sales Inc
Location: St. Charles, IL
Mfr: Agie
Model: PROGRESS-FOCUS-2
Year: 2012
Key s, * Four sided table with universal clamping frame., * Wire sizes from 0.006" - 0.013"., * Finishes of 0.2 Ra. (8 micro inch), * ACvision 5 control runs on Windows XP. This control ...more
Agie #Progress-V4, 31.5" x21.65" x20.7" trvls, ACVision 5 Control, 47" sq/hr max cut speed, 2007, #0856
Hitech Machinery Sales Inc | St. Charles, IL | Bill Raye |
Category: Wire EDM Machine
Seller: Hitech Machinery Sales Inc
Location: St. Charles, IL
Mfr: Agie
Model: PROGRESS-V4
Year: 2007
* ACvision 5 CNC Control, * 47 Sq" / Hour Maximum Cutting Speed, * Dual Feedback Measuring System - Both encoders and Heidenhain glass scales, * Universal Wire-Guide System - AC Patented ...more
Agie Charmilles #Cut20P, 13.8" X, 9.8" Y, 9.8" Z, AWT, chiller, 2011
Superior Machinery | Burt, MI | Keith McKay |
Category: Wire EDM Machine
Seller: Superior Machinery
Location: Burt, MI
Mfr: Agie Charmilles
Model: CUT20P
Year: 2011
Travels:, X-Logitudinal: 13.8"Y-Cross: 9.8"Z-Vertical: 9.8"Taper capacity: +/- 30 degrees, Workpiece:, Max Workpiece Dimension: 33.4" x 26.8" x 9.8", Charmiilles CNCAutomatic Wre Threader ...more
Aim #AF-3DL-TU-P5, Wire Machine, 2002
Revelation Machinery | Chicago, IL | Grayman Rivo |
Category: Wire EDM Machine
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Aim
Model: AF-3DL-TU-P5
Year: 2002
Wire Range: 1/4″, Wire linearity: < 5:1000 at 6mm (0.236"), Feed Speed: 120 meters/min (394 ft/min), Repeatability: +0.1 mm (+0.004"), Maximum cutting force: 4400 kgF (9700 lbF) ...more
Bridgeport #McWilliams-1014, Electrical Discharge Machine, Serial No 651, CNC Controls
G-2000 Inc | Toledo, OH | Evan Yoder |
Category: Wire EDM Machine
Seller: G-2000 Inc
Location: Toledo, OH
Mfr: Bridgeport
Model: MCWILLIAMS-1014
Bridgeport Model McWilliams 1014 Electrical Discharge Machine, Serial No 651, CNC Controls, Machine Type.Testers, Electrical Manufacturer.BRIDGEPORT Model.MCWILLIAMS 1014 Year.N/A ...more
Brother #HS-50A, CNC Wire Electrical Discharge Machine, 2000
Wheeler Machinery Sales | Pomona, CA | Dan Wheeler |
Category: Wire EDM Machine
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Brother
Model: HS-50A
Year: 2000
2000 Brother HS-50A CNC Wire EDM #6735 #2, Maximum work-piece size: 21" X 13" X 6", X-Axis travel: 16.1", Y-Axis travel: 10.2", Z-Axis travel: 6.7", Maximm taper angle cut: + / - 15 ...more
Charmilles Technologie #Robofil-310, 15.7" X, 9.8" Y, 15.75" Z, 8 filters, 1994, #16258J
Arlington Machinery | Lake Zurich, IL | Alan Clarke |
Category: Wire EDM Machine
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Charmilles
Model: ROBOFIL 310
Year: 1994
Product s, Charmilles Technologie, Robofil 310, New In 1994, Max Work Piece Size.33.5" x 15.75", Max Work Piece Weight.1,100 lbs., Travel X Axis.15.70", Travel Y Axis.9.80", Travel Z ...more
Charmilles #Robofil-240, wire Electrical Discharge Machine, 13.77" X, 8.66" Y, 8.66" Z, 2003
ACT Machinery | Fullerton, CA | Randy Goodman |
Category: Wire EDM Machine
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Charmilles
Model: ROBOFIL-240
Year: 2003
, Max Workpiece Dimensions:39.37 in x 21.65 in x 8.66 in Table Size:39.37 in Front Door Dimensions:32.28 in Max Workpiece Weight:1,653 LBS Machining Travels (X, Y, Z):13.77 in x 8.66 in x ...more
Charmilles #Robofil-240MP, 13.7x8.6x8.6" trvls, Charmilles CNC, AWT, submerged, 2006, #0836
Hitech Machinery Sales Inc | St. Charles, IL | Bill Raye |
Category: Wire EDM Machine
Seller: Hitech Machinery Sales Inc
Location: St. Charles, IL
Mfr: Charmilles
Model: ROBOFIL-240MP
Year: 2006
* Charmilles Millennium CNC Control, * Submerged Cutting Capability, * Automatic Wire Threader, * Anti-Collison Protection, * Transformer, * All Available Manuals and Accessories, Key ...more
Charmilles #Robofil-290, wire Electrical Discharge Machine with Advantage chiller, 1997
C & M Tool And Mfg | Waltham, MA | Dale Swett |
Category: Wire EDM Machine
Seller: C & M Tool And Mfg
Location: WALTHAM, MA
Mfr: Charmilles
Model: ROBOFIL-290
Year: 1997
BRAND / MODEL: CHARMILLES ROBOFIL 290 Wire EDM, YEAR: 1997, CONDITION: Used – minimal hours -only 3,045 hours., LOCATION: Waltham, Massachusetts – USA, SERIAL #: 335173, WEIGHT ...more
Charmilles #Robofil-290, 16 x 10 x 8" travels, glass scales, AWT, MDI, RS232, floppy, +/- 30 taper, 1998
EDM Network Inc | Sugar Grove, IL | Ron Vogel |
Category: Wire EDM Machine
Seller: EDM Network Inc
Location: Sugar Grove, IL
Mfr: Charmilles
Model: ROBOFIL-290
Year: 1998
1998 CHARMILLES FI290 AWT, Table Travel: X: 15.75", Y: 9.84", Z: 7.9", Machine:, U-V Stroke: 15.75" x 9.8", Taper Angle: ± 30º, Wire Diameter:.004 to.012", Maximum ...more
Charmilles #Robofil-440CC, wire Electrical Discharge Machine, 21.65" X, 13.78" Y, 15.75" Z, automatic threading, 2005
Tramar Industries Inc | Novi, MI | Mauro Damino |
Category: Wire EDM Machine
Seller: Tramar Industries Inc
Location: Novi, MI
Mfr: Charmilles
Model: ROBOFIL-440CC
Year: 2005
CNC Control yes Type of CNC Control CT Millenium Max Workpiece Weight 3300 lbs Max Workpiece Size 47" x 28" x 16" X Axis Travel 21.65" Y-Axis Travel 13.78 Z-Axis Travel 15.75 Taper Angle 30 ...more
Charmilles #Robofil-440cc, wire Electrical Discharge Machine, 21.6" X, 13.7" Y, 15.7" Z, automatic threading, 2005
ACT Machinery | Fullerton, CA | Randy Goodman |
Category: Wire EDM Machine
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Charmilles
Model: ROBOFIL-440CC
Year: 2005
, Max. Workpiece47.2" x 27.6" x 15.7" Max. Workpiece Weight3306 poundsX-Axis Travel21.6 inchesY-Axis Travel13.7 inchesZ-Axis Travel15.7 inchesAuto Threading (Yes/No)yes ...more
Charmilles #Robofil-2020SI, wire Electrical Discharge Machine, 12.59" X, 8.66" Y, 4.49" Z, 23.62" x16.93" table, 2003
Machnet | Santa Monica, CA | G. Taubman |
Category: Wire EDM Machine
Seller: Machnet
Location: Santa Monica, CA
Mfr: Charmilles
Model: ROBOFIL-2020SI
Year: 2003
Charmilles Robofil 2020 SI Wire EDM, New: 2003, Tank Size: 39.37" x 19.3" x 10.24", Floor to Table: 41.33", Maximum Workipiece Weight: 1100 lbs, Table Size: 23.62" x 16.93", Machining ...more
Charmilles #Robofil-2030SI, 12.5" X, 8.5" Y, 4.8" Z, 22" x 17.3" table, excellent, 2000
AMTAC Corp | Erie, PA | Russ Taccone,Jr. |
Category: Wire EDM Machine
Seller: AMTAC Corp
Location: Erie, PA
Mfr: Charmilles
Model: ROBOFIL-2030SI
Year: 2000
Charmilles #Robofil-440, CNC Electrical Discharge Machine wire, 21.65" X, 13.78" Y, 15.7" Z, Ebbco CLS-24 chiller, 2004
Equipment Hub | Stone Mountain, GA | Drake Denham |
Category: Wire EDM Machine
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Charmilles
Model: ROBOFIL-440
Year: 2004
Stock #: 120230022, Location: Stone Mountain, GA, Brand: Charmilles, Model: Robofil 440, Serial #: 930477, Year: 2004, Approx. Shipping Weight: 7,500 Lbs., Approx. Shipping Dimensions: ...more
Charmilles #Robofil-F1310, 10" x 16" x 16" travels, +/-30 Degrees taper, RS232, AWT, chiller, 20-22 sq.in/hour, 1995
EDM Network Inc | Sugar Grove, IL | Ron Vogel |
Category: Wire EDM Machine
Seller: EDM Network Inc
Location: Sugar Grove, IL
Mfr: Charmilles
Model: ROBOFIL-F1310
Year: 1995
Charmilles #Robofil-Fl510, 27.55" X, 15.75" Y, 15.75" Z, Fanuc control, chiller, glass scales, 1993
EDM Network Inc | Sugar Grove, IL | Ron Vogel |
Category: Wire EDM Machine
Seller: EDM Network Inc
Location: Sugar Grove, IL
Mfr: Charmilles
Model: ROBOFIL-FL510
Year: 1993
Charmilles Technology #Robofil-290, Wire Electrical Discharge Machine, 1998
Revelation Machinery | Chicago, IL | Grayman Rivo |
Category: Wire EDM Machine
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Charmilles Technology
Model: ROBOFIL-290
Year: 1998
Wire EDM.
Chmer #CW360S, 14.1" x 9.8" x 8.6" travel, +/- 14.5 deg taper, AWT, RS2342, 2004
EDM Network Inc | Sugar Grove, IL | Ron Vogel |
Category: Wire EDM Machine
Seller: EDM Network Inc
Location: Sugar Grove, IL
Mfr: Chmer
Model: CW360S
Year: 2004
Chmer #CW850HS, 32 x 20 x 12" travels, submerged, AWT, chiller, MDI, RS232, USB, LAN, 2005
EDM Network Inc | Sugar Grove, IL | Ron Vogel |
Category: Wire EDM Machine
Seller: EDM Network Inc
Location: Sugar Grove, IL
Mfr: Chmer
Model: CW850HS
Year: 2005
Chmer #G64S, 24 x 16 x 16" trvls, submerged, AWT, glass scales, 16" Z-travel opt., +/- 21 taper, 30kg spool, wire chopper, AC/DC, 2011
EDM Network Inc | Sugar Grove, IL | Ron Vogel |
Category: Wire EDM Machine
Seller: EDM Network Inc
Location: Sugar Grove, IL
Mfr: Chmer
Model: G64S
Year: 2011
Excetek #NP400L, Wire Electrical Discharge Machine, S/N DW20N40002, 220 V., 15.8" X, 11.8" Y, 8.7" Z, 2020
Machinery Source LLC | Belvidere, IL | Jeff Hassen |
Category: Wire EDM Machine
Seller: Machinery Source LLC
Location: Belvidere, IL
Mfr: Excetek
Model: NP400L
Year: 2020
, X-Axis Travel15.8 inchesY-Axis Travel11.8 inchesZ-Axis Travel8.7 inchesAuto Threading (Yes/No)yes Submerged (Yes/No)yes CNC Controlyes Type of CNC ControlExcetek 64-Bit Windows XP Based ...more
Excetek #NP400L, Wire Electrical Discharge Machine, 15.8" X, 11.8" Y, 8.7" Z, automatic threading, submerged, 2020
Machinery Source LLC | Belvidere, IL | Jeff Hassen |
Category: Wire EDM Machine
Seller: Machinery Source LLC
Location: Belvidere, IL
Mfr: Excetek
Model: NP400L
Year: 2020
, X-Axis Travel15.8 inchesY-Axis Travel11.8 inchesZ-Axis Travel8.7 inchesAuto Threading (Yes/No)yes Submerged (Yes/No)yes CNC Controlyes Type of CNC ControlExcetek 64-Bit Windows XP Based ...more
Fanuc #Robocut-C400iA, CNC Wire Electrical Discharge Machine, Reconditioned wire Electrical Discharge Machine, Ready to go, 2013
Myers Technology Co LLC | Elk Grove Village, IL | John Myers |
Category: Wire EDM Machine
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Fanuc
Model: ALPHA C400IA
Year: 2013
, Excellent condition, Reconditioned wire EDM, Ready to go., Touchscreen control with 15" Color LCD panel, Heidenhain Glass Scales "X" & "Y", Automatic threading, Submerged cutting ...more
Fanuc Alpha #C400ic-ADV, Wire Electrical Discharge Machine, 15" X, 11" Y, 10" Z, Fanuc Series 31i-WB Controller, 2021
Revelation Machinery | Chicago, IL | Grayman Rivo |
Category: Wire EDM Machine
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Fanuc
Model: C400IC-ADV
Year: 2021
Maximum Workpiece Dimensions: 28″ x 23″ x 9″, Maximum Workpiece Weight: 1102 Lbs., X-Axis Travel: 15″, Y-Axis Travel: 11″, Z-Axis Travel: 10″, U-Axis ...more
Fanuc #Robocut-A-C400iB, type A04B-0327-B001 #D5, 2016
Graff-Pinkert & Co | Oak Forest, IL | Lloyd Graff |
Category: Wire EDM Machine
Seller: Graff-Pinkert & Co
Location: Oak Forest, IL
Mfr: Fanuc
Model: ROBOCUT-A-C400IB
Year: 2016
Fanuc RoboCut A-C400iB, Mfd. 2016, Type: A04B-0327-B001 #D5, NO: P1694B083, Barely Used!.
Fanuc #Robocut-Alpha-01E, wire Electrical Discharge Machine, Fanuc 31i-WA Control, 14.6" X, 10.6" Y, 10.2" Z, chiller, 2010
Machinery Network Inc | Encino, CA | Sales Dept. |
Category: Wire EDM Machine
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Fanuc
Model: ROBOCUT-ALPHA-01E
Year: 2010
2010 FANUC ROBOCUT ALPHA 0IE, X-Axis Travel. 14.6", Y-Axis Travel. 10.6", Z-Axis Travel. 10.2", Taper. 30 degree, Work tank dimensions. 30.5" x 23.6", Max. workpiece dimensions. 30.5 x 23.6 ...more
Fanuc #Robocut-Alpha-1c, CNC wire Electrical Discharge Machine, Fanuc Series 16W Control, 20.5" X, 14.6" Y, 11.8" Z, 1998
Trader Machinery Inc | Concord, ON | Emilio Tarsitano |
Category: Wire EDM Machine
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Fanuc
Model: ROBOCUT-ALPHA-1C
Year: 1998
39.1" X 28.7" X 11.8"20.5"14.6"11.8"+/- 2.4"+/- 2.4"+/- 12 DEG. AWF ON, OR +/- 30 DEG. AWF OFF1,500 LBS.0.1 - 0.3200 - 2500 G5,100 LBS.
Fanuc #Robocut-Alpha-1iC/SAWF, CNC Wire Electrical Discharge Machine, Fanuc 18Ois-WB Control, 2007
Orca Machine Tools Inc. | Fridley, MN | Theron Horn |
Category: Wire EDM Machine
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Fanuc
Model: ROBOCUT-ALPHA-1IC/SAWF
Year: 2007
Maximum Workpiece Dimensons 43 x 32 x 12 Max. Workpiece Weight 3,350 lbs. Table Dimensions 21.6 x 14.6 x 12.1 Travels on Axes 5 X Axis Travel 21.6" Y Axis Travel 14.6" Z Axis Travel 12.1" ...more
Fanuc #Robocut-C400iA, wire Electrical Discharge Machine, 14.6" X, 10.6" Y, 10" Z, Fanuc 31i-WB, automatic threading, 2013
Tramar Industries Inc | Novi, MI | Mauro Damino |
Category: Wire EDM Machine
Seller: Tramar Industries Inc
Location: Novi, MI
Mfr: Fanuc
Model: ROBOCUT-C400IA
Year: 2013
CNC Control yes Type of CNC Control Fanuc 31i-WB X-Axis Travel 14.6 inches Y-Axis Travel 10.6 inches Z-Axis Travel 10 inches Auto Threading (Yes/No) yes Submerged (Yes/No) yes Dimensions ...more
Fanuc #Robocut-C400iA, Wire Electrical Discharge Machine, 14.6" X, 10.6" Y, 10" Z, 2013
Southern Fabricating Mchy Sales | Lithia, FL | Dan McCurdy |
Category: Wire EDM Machine
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Fanuc
Model: ROBOCUT-C400IA
Year: 2013
14.6" X 10.6" X 10" Wire EDM with 15" Color LCD Touchscreen Controls, Heidenhain X - Y Glass Scales, Automatic Wire Threader, Submerged Cutting, Fluid Chiller, Two LED ...more
Hansvedt / Hardinge #DS-2, CNC wire Electrical Discharge Machine, 6.5" X, 10.5" Y, 6" Z, 2.75" diameter pinch roller, 1989, #161354
Machinery Values Inc | Harrison, NJ | Andrew Valitt |
Category: Wire EDM Machine
Seller: Machinery Values Inc
Location: Indiana, IN
Mfr: Hansvedt
Model: DS-2
Year: 1989
Hansvedt/Hardinge Model #DS-2 CNC Wire EDM S/N: AJ09121…nbsp; New:…nbsp;1989 :Max. Workpiece Dimension…nbsp; 18" x 27" Travels:X:…nbsp; ...more
Hansvedt #DS-2, CNC wire Electrical Discharge Machine, 6.5" X, 10.5" Y, 6" Z, RW-103 remote, filtration system, 1990
Machinery Values Inc | Harrison, NJ | Andrew Valitt |
Category: Wire EDM Machine
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Hansvedt
Model: DS-2
Year: 1990
Hansvedt Model #DS-2 CNC Wire EDM S/N: AJ10117…nbsp; New:…nbsp;1990 :Max. Workpiece Dimension…nbsp; 18" x 27" Travels:X:…nbsp; 6.5"Y:…nbsp; ...more
in plant Automation #IFM-6, Threader, 460 Volts, 20 Amps
HGR Industrial Surplus | Euclid, OH | Sales Rep. |
Category: Wire EDM Machine
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: Ip Automation
Model: IFM-6
