12 Results
Amada #TEF-160, punch & die grinder, 1/2"- 4-1/2" cap., 7" grinding wheel diameter, 1 HP, #74241
Yoder Machinery Sales | Holland, OH
Category: Punch and Die Grinders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Amada
Model: TEF-160
SERIAL. HC1280, MODEL. TEC-160C, CAPACITY. 1/2" TO 4-1/2", GRINDING WHEEL STROKE. 3.93", 3 JAW CHUCK. 6-1/2", GRINDING WHELL DIAMETER. 7", COOLANT. YES, MOTOR. 1 HORSEPOWER.
Amada #TEG-160E, punch & die grinder, 6.5" chk, 3-jaw, coolant, 7" wheel, 1.25" hole, stand, 1988
Machinery Values Inc | Harrison, NJ
Category: Punch and Die Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Amada
Model: TEG-160E
Year: 1988
Amada Punch… Die Grinder Model: TEG160E… S/N: HH3317… NEW: 1988 7" Diameter Cup Wheel with 1-1/4" HoleTable Size:… 6" F-B x 8" L-R6-1/2"″-Jaw Chuck Manual Travel of Grinding Head Up… Down on″" Diameter… Column in.0005 GraduationsHead ...more
Amada #Togu-III, Automatic Punch & Die Grinder, 6.30" max tool diameter, 3000 RPM, 2 HP
Wheeler Machinery Sales | Pomona, CA
Category: Punch and Die Grinders
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Amada
Model: TOGU III
Amada Togu III Automatic Punch & Die Grinder 6.30" #6496 #2, MAX. DIAMETER TOOL SIZE: 6.30", MAX. GRINDING: 0.39", MAIN AXIS MOTOR: 2 HP, MAIN AXIS ROTATION SPEED: 3,000 RPM, MAIN AXIS TRAVEL: 9.45", MAIN AXIS FEED MOTOR (SERVO): 0.05 HP, MAIN AXIS FEED SPEED-HIGH: 23.6 IPM, MAIN AXIS FEED SPEED-MIDDLE: 2.36 IPM ...more
Amada #Togu-III, punch & die grinder, 2002
Machinery Values Inc | Harrison, NJ
Category: Punch and Die Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Amada
Model: TOGU-III
Year: 2002
AMADA MODEL TOGU-III PUNCH… DIE GRINDER ** MAINTAIN PUNCHES… DIES AT OPTIMUM CONDITION ** S/N:″0230185… NEW: 2002 MAXIMUM GRINDING AMOUNT: 0.099"MAXIMUM/MINIMUM TOOL DIAMETER: 6.299MAXIMUM/MINIMUM TOOL HEIGHT: 5.906"STANDARD GRINDING WHEEL: 5.315"SPINDLE MOTOR: 2 H.P.SPINDLE ...more
DCM Tech #PDG-5-3, automatic punch & die rotary surf grinder, 18" diameter, 1-1/4" hole, 6.5" 3-jaw chuck, 6 t-slot, work light, automatic feed cycles
Sterling Machinery Exchange | South El Monte, CA
Category: Punch and Die Grinders
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Dcm
Model: PDG-5-3
Diameter 18" T-slot 6 Maximum 10" Speed 3,600 RPM Speed 3,600 RPM Motor 5 HP Motor 5 HP Autofeed Rate - Infinitely Variable 0.0005 - 0.020 IPM Manual Handwheel Graduations 0.001" Cup Wheel Type 6 or 11 Size 6" OD Spindle Hole 1-1/4" Tilt Angle 0 - 10 Deg. 3-Jaw Chuck 6-1/2" Dimensions 42" x 36" x 64"(H) s 3-Jaw Chuck ...more
Get email updates for newly added Punch and Die Grinders
Punch and Die Grinders (also known as die sharpening grinders or tool grinders) are machines designed to sharpen and recondition punches and dies used in metal forming and stamping processes. Commonly used in manufacturing and tool-making industries, they ensure precision and extend the lifespan of tooling. Punch and die grinders are essential for maintaining high-quality production standards.
DCM #PDG-5-3 PLC, automatic punch & die rotary surface grinder, 6" chuck, 3-jaw, 5" x7" magnetic chuck, 18" table diameter
Generation Machine Tools | Sarasota, FL
Category: Punch and Die Grinders
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Dcm
Model: PDG-5-3
DCM PDG-5-3 AUTOMATIC Rotary Surface Grinder, Reference #6693, Model # PDG-5-3 PLC, Serial # 482150, Table diameter- 18”, Table speed- 20 R.P.M., Spindle speed- 3,600 R.P.M., Spindle grinding wheel size- 6”, Spindle grinder wheel size- 1-1/4”, Tilt angle- 0-10 degrees, Autofeed rates- 0.0005” ...more
DCM #PDG-5-3 DCAF, punch & die grinder (rotary surface), automatic downfeed, 2006
Fram Fram LLC | Savage, MN
Category: Punch and Die Grinders
Seller: Fram Fram LLC
Location: Savage, MN
Mfr: Dcm
Model: PDG-5-3
Year: 2006
INV 7490, This grinder is fresh from a company that was bought out by another company. They sold their turret punch making this machine obsolete to their operations. This is coming out of a one shift shop that ran one Strippit. We can palletize for LTL shipping if needed. Inspect under power at our Savage, MN ...more
DCM #PDG-5-3 DCAF, Punch and Die Grinder, 3 Jaw Chuck with ID and outside dimension Jaws, 230 V, 3 phase, 30A
VX-LLC | Holland, OH
Category: Punch and Die Grinders
Seller: VX-LLC
Location: Holland, OH
Mfr: Dcm
Model: PDG-5-3 DCAF
3 Jaw Chuck with ID and OD Jaws 230v, 3 phase, 30A Model: PDG-5-3 DCAF (2) Available (PRICING BELOW REFLECTS THE PRICE FOR UNIT).
DCM Tech #PDG-5-3-DCAF, automatic punch & die rotary surface grinder, 18" diameter, 6 t-slot, 6.5" chk, 3-jaw, 7" x4" PMC, automatic incremental downfeed, 2011
Machinery Values Inc | Harrison, NJ
Category: Punch and Die Grinders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Dcm
Model: PDG-5-3-DCAF
Year: 2011
DCM Tech AUTOMATIC "Made in USA"Punch… Die Rotary Surface Grinderwith Automatic Cycle, Automatic Downfeed Model:… PDG-5-3 DCAF… S/N: 506411… New: 2011 : Diameter. 18"T-Slot. 6Speed. 20 RPMMotor. 1/2 HPMaximum. 10"Speed.″600 RPMMotor. 5 HPAutofeed Rate - Infinitely ...more
Strippit, punch & die grinder, 115 V., several in stock, Tag #14964
Yeoman Machinery Corp | Elkhart, IN
Category: Punch and Die Grinders
Seller: Yeoman Machinery Corp
Location: Elkhart, IN
Mfr: Strippit
Strippit-Houdaille Punch & Die grinder
Peterson Machinery Sales | Casa Grande, AZ
Category: Punch and Die Grinders
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Strippit
Manufacturer Strippit-Houdaille Model Punch & Die grinder Condition Used Stock Number 4172.
Strippit-Houdaille Punch & Die grinder W/coolant tank
Peterson Machinery Sales | Casa Grande, AZ
Category: Punch and Die Grinders
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Strippit
Manufacturer Strippit-Houdaille Model Punch & Die grinder Condition Used Stock Number 4173.
