go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Vertical Band Saws

Popular Manufacturers in Vertical Band Saws

warning
1 - 50 of 525 listings

7" x 6" Jet #JWBS-14CS, Vertical Bandsaw Woodworking

Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Jet
Model: JWBS-14CS
Jet JWBS-14CS Vertical Bandsaw Woodworking 14" #6479 #1, Swing: 14", Throat Depth: 7", Max. Work Height: 6", Table Size (Tilting): 15" x 15", Table Tilt: 10 Left, 45 Right, Blade Speed: 3,000 FPM, Maximum Blade Width: 3/4", Blade Length: 93-1/2", Resaw Capacity: 6", Dust Collection: 4" Port, Motor: 1 HP Single Phase ...more

8-1/4" x 9-1/2" Roll-In, vertical band saw, 10' x 3/4" blade, variable speed, gravity feed system, 1986

Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Roll-In
Year: 1986
ROLL-IN VERTICAL BAND SAWS/N: 86001A,… MFG: 1986 :CAPACITY THROAT DEPTH. 8-1/4"CAPACITY UNDER GUIDE. 9-1/2"BLADE TRAVEL INTO WORK. 9"WHEEL SIZE. 14"TABLE SIZE. 18-1/2" x″0"BLADE LENGTH. 10'BLADE WIDTH. 1/2" -″/4"SPEEDS (3). 70, 140, 270 FPMDIMENSIONS. ...more

8-1/2" x 14-1/2" Jet #VSF-14-3, vertical band saw, 8-1/2" throat, 12' blade, 1 HP, foot pedal, 2011

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Jet
Model: VSF-14-3
Year: 2011
SERIAL. 111001281, MODEL. VSF-14-1, YEAR NEW. 2011, CUTTING CAPACITY RECTANGLES. 8-1/2" X 14-1/2", DEPTH OF THROAT. 8-1/2", BLADES SPEEDS. 40,140 280 & 580 SFPM, TABLE AREA. 30-1/2" X 18-1/2", BLADE WIDTH. 1/8" TO 1" MAXIMUM, BLADE LENGTH. 120", PASS LINE HEIGHT. 30", FOOT PEDAL. YES, PHASE. 3, VOLTAGE. 220/440 ...more

8.5" x 14.5" Roll-in #EF1459, vertical bandsaw, 18-1/2" x 30" table, gravity feed system, 1994

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Roll-In
Model: EF1459
Year: 1994
Feed System Gravity Feed Blade Travel 9 into work Cutting Capacity at 90 Round: 8.5" Rectangle: 14.5" x 8.5" Miter Cut Angle Range 0 - 45 (Material Can Rotate 45 In Clamp) Bevel Cut Angle Range no Capacity Under Guides 14.5 inches Throat 8.75 inches Blade Size (Ships With Saw) 3/4 Width x 8/12T x 10' Length.035 ...more

8-3/4" x 8-1/2" Roll-In, vertical band saw, 9' x 3/4" blade, 30" x 18-1/2" table, 3/4 HP

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Roll-In
SERIAL. 12354, CAPACITY. 8-3/4" X 8-1/2", AREA OF TABLE. 30" X 18-1/2", BLADES SPEEDS. 70,140,270 & 525 FPM, DEPTH OF THROAT. 8-3/4", MAXIMUM UNDER GUIDE. 8-1/2", HEAD TRAVEL. 9", LENGTH OF BLADE. 9', WIDTH OF BLADE. 3/4" MAXIMUM, HEIGHT FLOOR TO TABLE TOP. 30", MOTOR (SINGLE PHASE). 3/4 HORSEPOWER.

Get email updates for newly added Vertical Band Saws

8-3/4" x 8-1/2" Rollin #SF8590, vertical band saw, 9' x 3/4" blade, 70-525 SFPM, 8-3/4" throat, 8.5" under guide

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: SF8590
SERIAL. 12354, MODEL. SF8590, CAPACITY. 8-3/4" X 8-1/2", AREA OF TABLE. 30" X 18-1/2", BLADES SPEEDS. 70,140,270 & 525 FPM, DEPTH OF THROAT. 8-3/4", MAXIMUM UNDER GUIDE. 8-1/2", HEAD TRAVEL. 9", LENGTH OF BLADE. 9', WIDTH OF BLADE. 3/4" MAXIMUM, TABLE HEIGHT FLOOR TO TABLE TOP. 30", PHASE. 3, MOTOR HORSEPOWER. ...more

8.75" x 14.5" Roll-In #EF-1459, vertical band saw, 8-1/2" rounds, 70-525 FPM, 1 HP, new

C.W. Wood Machinery Inc | Cincinnati, OH
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Roll-In
Model: EF-1459
(NEW) ROLL-IN VERTICAL BAND SAW, MODEL: EF1459, "The EF1459 is actually a horizontal band saw on a vertical frame. An all-purpose band saw, it handles all metals, plastics, and woods in a variety of cuts. It is a fast, accurate cut-off machine that is perfect for notching, slitting and slotting. A reliable addition to ...more

8-3/4" x 14.5" Roll-In-Saw, vertical band saw, .75" x 120" blade, 1 HP

Midstate Machinery | Phoenix, AZ
Seller: Midstate Machinery
Location: Phoenix, AZ
Roll-In-Saw Vertical Band Saw, ROLL-IN EF1459, Throat. 8.75", Power. 1 hp, Blade Width. 0.75", Blade Length. 120".

9" x 14-1/2" Roll-In #EF-1459, band saw, 30" x 18-1/2" table, 10' x 3/4" blade, 1 HP

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Roll-In
Model: EF-1459
SERIAL., MODEL. EF1459, YEAR NEW., CAPACITY. 9" X 14-1/2", AREA OF TABLE. 30" X 18-1/2", BLADES SPEEDS. 70,140,270 & 525 FPM, DEPTH OF THROAT. 8-3/4", MAXIMUM UNDER GUIDE. 14-1/2", HEAD TRAVEL. 9", MITER CUT RANGE. 0 TO 45 DEGREE, LENGTH OF BLADE. 10', WIDTH OF BLADE. 3/4" MAXIMUM, TABLE HEIGHT FLOOR TO TABLE ...more

9" x 16" DoAll #C916S, vertical band saw, 159" x 1" blade, 105-275 FPM, 1997

D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Doall
Model: C916S
Year: 1997
ORDER 9, MODEL: C916S SERIAL#: 529-97344 RECTANGULAR @ 90º: 9” x 16” ROUND @ 90º: 10 ¾” BLADE SIZE: 159” x 1” BLADE SPEED: 105-275 FPM TABLE HEIGHT: 27”, COOLANT PUMP, EXTRA WORK SUPPORT, WIRE BRUSH YEAR: 1997 (Approx.) MOTOR: 2 HP V.S. WEIGHT: 1,350 LBS DIMENSIONS ...more

9" x 36" Jet #VBS-900, vertical bandsaw

G-2000 Inc | Toledo, OH
Seller: G-2000 Inc
Location: Toledo, OH
Mfr: Jet
Model: VBS-900
SERIAL.: 90061, MODEL.: 900 VBS, CAPACITY.: 9" X 36", Machine Type.Saws, Bandsaws Manufacturer.JET Model.VBS-900 Year.N/A Condition.Not specified.

10" x 9" Marvel #V10A2, vertical mitre cutting band saw, 182" x 1" blade, 50-500 FPM, 3 HP, coolant, 1990 (2 available)

Aleco Machinery Sales | Milwaukee, WI
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Marvel
Model: V10A2
Pre Owned 1990 Marvel V10A2 Vertical Mitre Cutting Band Saw, Serial Number: D-181710W, Capacity 10" X 9", Blade at 45 Degree Angle 180 X 15", Blade 182" X 1", Blade Speeds 50 - 500 FPM (INF. VARIABLE), Motor 3 HP, Hydraulic Vise, 45 Degree Tilt, Shuttle Infeed, 24" Multi-Cycle Index, Coolant, Approximate Overall ...more

10" x 10" Kasto #SSB260VA, full automatic, indexable feed, nesting, feed table, 1997, #44956

Liberty Machinery Co | Lincolnshire, IL
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Kasto
Model: SSB260VA
Year: 1997
New - 1997, Serial No. 6510 114 322, Cutting Range.10.24 x 10.24"/10.24" rounds, Cutting Range Bundle Width.5.91" - 10.24", Cutting Range Bundle Height.0 - 7.87", Clamping Range.0 - 10.24", Smallest Diameter To Be Cut.0.39", Shortest Length Of Cut-Off Piece.0.23", Minimal Remnant Length - Automatic Operation.4.53" ...more

10" x 10" Kasto #SSB260VA-CC, 162" L x 1.61" W x .05" T blade, chip conveyor, 1998

Die-Matic Tool & Machinery Inc. | Meridianville, AL
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Kasto
Model: SSB260VA-CC
Year: 1998
KASTO CNC HIGH PRODUCTION VERTICAL SAW, MODEL: SSB 260 VA CC, S/N: 6510 115 059, NEW: 1998, TYPE:6510, SERIS 115, PROGRAMMABLE, CAPACITY 10" X 10", AUTOMATIC FEED, 7.3 HP SAW MOTOR 440 VOLT 3 PHASE, SAW-BAND SPEED: VARIABLE 49"-410' PER MIN., SAW-BAND: 162" LONG X 1.61" WIDE X.05" THICK, HYDRAULIC NESTING CLAMP ...more

10" x 10" Marvel #V10A, vertical band saw, 12' x 1" x .035" blade, 60-400 FPM, 10.5" vise, 1993

Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Marvel
Model: V10A
Year: 1993
MARVEL AUTOMATIC BAR FEED SAWMODEL: V-10A, S/N: D 138910-W, NEW: 1993 :CAPACITY: ROUND. 10" FLAT. 10" X 10" AT 45 DEG FLAT. 10" X 7" AT 45 DEG ROUND. 7"VISES: MAX OPENING. 10-1/2" HEIGHT OF JAW. 6"BLADE: STANDARD. 12' X 1" X.035" WHEELS, DIA. 15" SPEED. 60 TO ...more

10" x 12" Amada #HA-250W, 1.25" x.042" x138" blade, stroke vise, 2006

Machinery Marketing International | Chicago, IL
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Amada
Model: HA-250W
Year: 2006
MACHINE RECT-CAP (H) 10" RECT-CAP (W) 12" ROUNDS-CAP 10" POWER 5 hp TYPE Auto BLADE WIDTH 1.25" BLADE THICKNESS 0.042" BLADE LENGTH 138" DIMENSIONS 7 ft x 7ft x 5ft 6in WEIGHT 2,600 lbs, MACHINE FULL STROKE VISES SPLIT FRONT VISE FOR BURR FREE CUTS RAPID HEAD ADVANCE PIECE COUNTER MULTIPLE FEED STROKE CONTROL CARBIDE ...more

E-R Maier 10" x 12" ER-Maier #KM1012, vertical band saw, 122" x .75" blade, 1 HP

Platinum Asset Services | Scarborough, ON
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: E-R Maier
Model: KM1012
ER-MAIER, KM1012, VERTICAL BANDSAW, E-R MAIER KM1012, Throat Cap. 10", Work Height. 12", Power. 1 hp, Blade Width. 0.75", Blade Length. 122".

10" x 12" ER Maier #KM1012, vertical band saw, 122" x .75" blade, 1 HP

Platinum Asset Services | Scarborough, ON
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Er Maier
Model: KM1012

10" x 13" Baxter Verticut #115C, Vertical Bandsaw, 3/4" x 10' blade, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Baxter Verticut
Model: 115C
Round Cutting Capacity 10 inches Round with maximum 8 1/2 (216 mm) length Cutting Capacity 13 inches Round at 45 degrees Cutting Capacity 7 inches Rectangular Cutting Capacity 10" x 13" Rip cutting width 9 inches Blade Size 1/4" to 3/4" x 10' Blade Speeds 75, 130, 215, 350 feet/min Blade Tension 30,000 psi Table ...more

10" x 49" FMB #Pluton-Air, 18' 4-1/2" x 1-1/4" x .042" blade, 131-525 FPM, 4 HP

Pioneer Machine Sales | Rosenberg, TX
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Fmb
Model: PLUTON-AIR
FMB DIRECT GEAR DRIVEN SAWS - GRATING-PANEL SAW SERIES Pluton - a semi-automatic precision band saw machine designed to cut steel grating and panels. The saw blade is positioned at a 4 degree cant to provide the most effective position of the teeth in the material as it is being cut. This ensures faster and more ...more

10.2" x 5.9" Hemsaw #260BSA, Carif Double Utility Miter Band Saw, 1" X 96-1/2" X .035" blade, semi-automatic, New

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: 260BSA
Saw Double Miter, Horizontal, Utility Band Saw Saw Capacity 0-10.2" W x 0-5.9" H (Rectangular), 0-8.7" (Round Diameter), 0-5.9" (Square) Miter Capacity 5.9" W x 5.9" H @ 45 (L) 4.7" W x 3.9" H @ 45 (R) 3.5" W x 2.4" H @ 60 (L) Arm Miter Dual 45 Miter / One-Way 60 Miter. Release the lock and manually move the saw head ...more

10.25" x 10.25" Kasto #SBB-260, Automatic Vertical Bandsaw, 1986

Scott Machinery & Supply Inc | Helena, AL
Seller: Scott Machinery & Supply Inc
Location: Helena, AL
Mfr: Kasto
Model: SBB-260
Year: 1986
Model:SSB 260 VA, S/N: 1101556510/70194, Year:1986, Technical, Cutting Diameter, 10.25", Saw Band Length 154", Cutting Width: 10.25", Dimensions of saw-band : 162"x 1 3/8" x.5, Total Power Requimenrt: 8 HP, Electrical Information: 220V, 35amp, 3ph, 60Hz+, Weight Of Machine: 5,000lbs, Overall Size:, Saw: 7'L x ...more

10.25" x 10.25" Kasto #SSB-260VA, automatic vertical bandsaw, 162" x1.5" x0.050" blade, 49-410 FPM

G-2000 Inc | Toledo, OH
Seller: G-2000 Inc
Location: Toledo, OH
Mfr: Kasto
Model: SSB-260VA
Blade Length:162 inches CNC Control: no Rect-Cap (H): 10.23 inches Rect-Cap (W):10.23 inches Rounds-Cap:10.23 inches Square-Cap:10.23 inches Power: 5.5 horsepower Type (Auto, Manual, Semi): Automatic Dimensions: 84" x 86" x 79" Weight: 5000 pounds Blade Width:1.5 inches Blade Thickness:.050 inches Brand: KastoModel: ...more

11-3/4" x 12-1/2" DoAll #DS-320SA, Dual Miter Semi Automatic Band Saw

Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DS-320SA
11-¾" x 12-1/2″ Band Saw with Mitsubishi Saw Control Overfeed Protection Blade-Driven Band Brush 3.3 ft (1000mm) Work Stop Directly Mounted Work Height Sensor Variable Frequency Drive Work Light Flood Coolant Tool Kit Complimentary DoALL Cutting Fluids Package One DoALL Bi-Metal Saw Blade Instruction ...more

11-3/4" x 12-1/2" DoAll #DS-320SA, dual miter semi-auto band saw, 7" rnd, 10-240 FPM, new

Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DS-320SA
11-3/4" x 12-1/2" Band Saw with Mitsubishi Saw Control Overfeed Protection Blade-Driven Band Brush 3.3 ft (1000mm) Work Stop Directly Mounted Work Height Sensor Variable Frequency Drive Work Light Flood Coolant Tool Kit Complimentary DoALL Cutting Fluids Package One DoALL Bi-Metal Saw Blade Instruction and parts ...more

11.75" x 12.5" DoAll #S-320CNC, Structurall automatic CNC swivel bandsaw, chip conveyor, new

Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: S-320CNC
11.75" x 12.5" Band Saw with Mitsubishi Saw Control, Variable Frequency Drive, Overfeed Protection, Work Height Sensor, Discharge Chute, Pulley-Driven Band Brush, Work Light, Flood Coolant, Tool Kit, Complimentary DoALL Cutting Fluids Package, One (1) DoALL Bi-Metal Saw Blade, Instruction and Parts Manuals on CD or ...more

11-3/4" x 23-1/2" Cam-Wood #BS-0242X, Band Saw, 24" wheel, 3 HP, 2800 RPM, 24" x 31-1/2" table, 2023

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BS-0242X
Year: 2024
CAM-WOOD BS-0242 Band Saw, s & :, Large precision ground cast iron table. Precision ground cast iron rip fence. Slot-in-table for use of miter guage. Large hand wheel for easy blade tensioning. 24" Wheels with vulcanized rubber and precision balanced, 3HP direct drive motor; blade speed 2,000 - 2,800 RPM. Cutting ...more

12" x 6" Sears Craftsman #113-247440, Vertical Bandsaw, #6224

Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Sears Craftsman
Model: 113-247440
SEARS CRAFTSMAN 113-247440 VERTICAL BANDSAW 12" #6224 #1, Throat Depth: 12", Max. Work Height: 6", Table Size: 23" x 27", Blade Tilt: 0- 45 Degrees, Motor: 1 1/8 HP Single Phase, 2 Speed, Rip Fence, Stand, Wheels.

12" x 6-1/2" Craftsman #113-243311, Vertical Band Saw, #6242

Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Craftsman
Model: 113-243311
Craftsman 113-243311 Vertical Band Saw 12" #6242 #2, Throat Depth: 12", Max. Work Height: 6 1/2", Table Size: 12 1/2" x 14", Blade Size: 1/8"- 1/2" x 80" Long, Motor: 1/2 HP Single Phase, Stand, Work Light.

12" x 12" DoAll #C-305A, Vertical Band Saw, 1-1/4" x 144" saw, 350 FPM, front unload tray, hydraulic, coolant

National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Doall
Model: C-305A
MODEL. #305A, CAPACITY. 12" X 12", CAPACITY ROUND. 12", BLADE SPEEDS. 60 TO 350 FPM (VARIABLE), SAW BAND. 1-1/4" WIDE X 144" LONG, FRONT UNLOAD TRAY. YES, AUTOMATIC INDEXING. 16"', MULTIPLE INDEX. 48", HYDRAULIC VISE. YES, HYDRAULIC BLADE TENSION. YES, CHIP CONVEYOR. YES, HYDRAULIC BLADE FEED. YES, PRE SET CUT ...more

12" x 12" DoAll #DC300CNC, dual column enclosed band saw, 178" blade, 65-328 FPM, new

Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC300CNC
12" x 12" Band Saw with Siemens Saw Control with Touch Screen Display Hydraulic Band Tension Work Light Power-Driven Band Brush Automatic Guide Arm Setting Work Height Sensor Automatic Feed Control with Programmable Feed Rates Variable Vise Pressure Control - Set of 2 Worm Chip Conveyor Discharge Chute Automatic ...more

12" x 19-1/4" Cam-Wood #BS-0202X, Band Saw, 20-1/2" x 25" table, 20" wheel diameter, 2800 RPM, 155" blade L, 3 HP, 2023

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BS-0202X
Year: 2024
CAM-WOOD BS-0202 Band Saw, 12" x 19-1/4" Cutting Capacity, 20-1/2" x 25" table and table tilts 10 left and 45 right. 20" Wheel dia., 2,800 RPM blade speed and 155" blade length. 3 HP Single Phase (230 V) motor., s: Large precision ground cast iron table. Precision ground cast iron rip fence. Slot-in-table for use of ...more

12" Craftsman, vertical bandsaw, tilting head 45° with stock stand

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Craftsman
WIDTH------------------------------------3/16 in, GAUGE------------------------------------.025, TPI--------------------------------------10, VOLTAGE----------------------------------120, AMPS-------------------------------------7.9, WORK SURFACE-----------------------------23 in x 27 in, TILT ...more

12.6" x 8.6" Hemsaw #320BSA, Carif Double Miter Band Saw, 1" x 119" x .035" blade, semi-automatic, new

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: 320BSA
Saw Horizontal Pivot Band Saws Saw Capacity 12.6" W x 8.6" H @ 90 (10.8" round), 0-12.6" W x 0-8.6" H (Rectangular), 0-8.6" (Square) Miter Capacity 7.3" W x 8.7" H @ 45 (L) 7.9" W x 3.9" H @ 45 (R) 4.7" W x 8.7" H @ 60 (L) Operation Semi-Automatic Blade Size 9' 11" L x 1" H x.035" Blade Drive 3 HP 440V (3-Phase) ...more

13" x 20" DoAll #2013-20, vertical band saw, 30" x 30" table, 230V, 3 phase, DoAll, model DBW-15, blade welder, 154" saw band length, S/N 377-79204

Miedema Auctioneering & Appraisals Inc | Byron Center, MI
Seller: Miedema Auctioneering & Appraisals Inc
Location: Byron Center, MI
Mfr: Doall
Model: 2013-20
Auction Date: 06/18/2024, (1) DoAll, model 2013-20, vertical band saw, 30" x 30" table, 230V, 3 phase, DoAll, model DBW-15, blade welder, 154" saw band length, S/N 377-79204, with work light.Category: Industrial & Factory.

13" x 32" DoAll #MP-20, vertical band saw, 41" x32" tilt table, power feed, 1" W blade, 1960

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Doall
Model: MP-20
Year: 1960
Make: Doall, Model: MP-20, Year: 1960, Machine Location: Quebec, Canada, Tilt Table 41″ x 32″, Power Feed, Blade Width – 1″, Blade Welder, 440V/22 AMP.

13.2" x 13.2" DoAll #TF-1421H, vertical band saw, 1" x 171" blade, 480 V., 350 RPM, hydraulic vise

Die-Matic Tool & Machinery Inc. | Meridianville, AL
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Doall
Model: TF-1421H
DoAll Vertical Band Saw, Model:TF-1421H, Capacity, Round: 13-1/4", Work Table Height: 38", Tilt Frame 45 Degrees Right or Left Manual, Hydraulic Vice, Blade: 1" x 171", Blade Speed: 350 RPM, Volyage: 480.

13. 5" x 5" Butcher Boy, vertical band saw, 1 HP, 1725 RPM, 208-230/460 V., 3-phase

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Butcher Boy
Butcher Boy Vertical Band Saw. Product clearance: 13-1/2 in. W x 5 in. H. Push button control panel. (2) Chain conveyor belts. Band saw width: 1/2 in. Woods E-trac AC Inverter. (4) Wheels for easy maneuverability. Baldor Motor, 1 hp, 1725 rpm, 208-230/460 V, 7-3.4/1.7 amps, 60 Hz, 3 phase. Motor, 3 hp, 1732 rpm, 415 ...more

14" x 8" Rutland #26680360, vertical band saw, 22" x 20" table, variable blades speed, blade welder, 1 HP, 1990

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rutland
Model: 26680360
Year: 1990
SERIAL. 9036255, MODEL. 26680360, YEAR NEW. 1990, AREA OF TABLE. 22" X 20", DEPTH OF THROAT. 14", MAXIMUM UNDER GUIDE. 8", BLADES SPEED. VARIBLE, BLADE DIAMENSIONS. 118" X 035 X 1/2", BLADE WELDER. YES, MOTOR HORSEPOWER. 1.

14" x 9" Grob Brothers, Sander, 14' x 9" x 1" band, 1 HP, 110 Volts

FMI Trading LLC | Vinton, TX
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Grob
Product Information, Sanders Band Size:14' x 9" x 1" HP:1 Select Product Information.:110v Weight:1670 lbs Dimensions:24" x 40" x 60", Product Code: 03040140027 Make: Grob Brothers Model: S/M Serial Number: 5580 Condition: Used.

14" x 20" Doall #DS-500SA, dual miter semi automatic bandsaw, digital read out, 188" L x1-1/4" x.042" blade

Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DS-500SA
14" x 20" Band Saw with Mitsubishi Saw Control Variable Frequency Drive Pulley-Driven Band Brush Overfeed Protection Digital Read Out of Cutting Angle Hydraulic Band Tension Work Light Mist-Style Band Lubrication Variable Vise Pressure Control Flood Coolant Tool Kit Complimentary DoALL Cutting Fluids Package One ...more

14" x 20" DoAll #S-500CNC, Structurall bandsaw, Mits Control, flood coolant, digital read out, 65-328 fpm

Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: S-500CNC
14" x 20" Band Saw with Mitsubishi Saw Control Flood Coolant Over Feed Protection Operations and Parts Manuals on CD or USB Data Stick Variable Frequency Drive Tool Kit Digital Read Out of Cutting Angle Complementary DoALL Cutting Fluids Package Pulley-Driven Band Brush One (1) Complimentary DoALL Bi-Metal Saw ...more

14" x 20" HEM #V100, vertical tilt frame bandsaw, variable vise pressure, air clamp, quick ratchet, 1984

Westbrook Engineering Co | Warren, MI
Seller: Westbrook Engineering Co
Location: Warren, MI
Mfr: Hem
Model: V100
Year: 1984
Brand: Hem, Model: V-100, Capacity @ 90 degrees: 14"w X 20"h, Capacity @ 45 degrees: 14"w X 14"h, Blade size: 1" x 13'6" x.032", Blade motor: 2 H.P., Voltage: 220 / 440 volt 3 phase, Variable vise pressure, Air clamp with quick ratchet, Manual head tilt, Manual blade tension, Manual blade speed change.

14" x 20" Roll-in TF1420, Vertical Saw, 2012

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Roll-In
Model: TF1420
Year: 2012
Make: Roll-In, Model: TF1420, Year: 2012, Machine Location: Michigan, Capacity Under Guides 20″ Under Guides @ 90°, Throat: 14″ x 13″ @ 45°, Blade Travel: 14″ into Work, Blade Size: 1″ Width x 12′ 11″ Length.035 Thick (bi-metal), Blade Speeds: 70 to 400 sfpm, Table: 31 ...more

14" x 20" Roll-In #TF1420, tilt frame pneumatic feed vertical band saw, never used

Equipment Hub | Stone Mountain, GA
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Roll-In
Model: TF1420
Stock #: 131240025, Location: Stone Mountain, GA, Brand: Roll-In, Model: TF1420, Approx. Shipping Weight: 2,000 Lbs., Approx. Shipping Dimensions: 74" L x 68" W x 90" H, Loading Fee: Rigging Required, Round Solid Capacity 90 Deg: 14", Round Solid Capacity 45 Deg: 13", Round Tube Capacity 90 Deg: ...more

14" x 21" DoAll #TF-1421H, 75-400 FPM, 1" W x 172" L blade, coolant, 5 HP, 1988, #64663

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: TF-1421H
Year: 1988
SERIAL. 363-88695, MODEL. TF-1421H, NEW. 1988, CAPACITY. 14" X 21", CAPACITY ROUND. 14", CAPACITY AT 45 DEGREES. 14" X 14", WORKING SURFACE OF TABLE. 32" X 30", BLADE SPEEDS. 75 TO 400 FPM, HYDRAULIC HEAD TILT. 45 DEGREE EITHER WAY, HYDRAULIC VISE. YES, BLADE. 1" W X 172" L, HEAD FEED. HYDRAULIC, COOLANT. YES, MOTOR. ...more

14" x 21" DoAll #U-1421, vertical band saw, #75793

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: U-1421
SERIAL. 375-80218, MODEL. U-1421, YEAR NEW. 1980, CAPACITY. 14" X 21", CAPACITY @ 45 DEGREES. 14" X 14", LENGTH OF BLADE. 172", WIDTH OF BLADE. 1", BLADE SPEED (VARIABLE). 105 TO 275 FPM, AREA OF TABLE. 36" X 32", TABLE CAPACITY. 1000 LBS, HEAD TILTS LEFT & RIGHT. 45 DEGREES, COOLANT WITH CHIP PAN. YES, MOTOR. ...more

14" Jet #VBS-1408, vertical band saw, 82-330 FPM, 1 HP, 1/8"- 1/2" blade

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Jet
Model: VBS-1408
JT9-414483, Blade speed 82 - 330 fpm, Blade 1/8 - 1/2”, Motor 1 HP, 115/230V, 1Ph, Dimensions 34 x 24 x 68”, Table height 39”, 20 x 20, Throat 14”, Weight 634#.

14-1/2" x 6" Delta Rockwell #28-290, vertical band saw, 14" x 14" table, #75114

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Delta Rockwell
Model: 28-290
MODEL. 28-290, THROAT. 14'-1/2", TABLE SIZE. 14" X 14", HEIGHT UNDER BLADE GUIDE. 6" MAX, FLOOR TO TABLE. 42", MOTOR. 115/230/1/60, OVERALL DIMENSIONS. 22" FB X 17" L-R X 65" HIGH.

15" x 20" Marvel #E380PC3, tilt frame saw, #17102J

Vander Ziel Machinery Sales | Alto, MI
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Marvel
Model: E380PC3
Marvel E380PC3 Tilt Frame Saw, Asset # 17102J.