Radial Drills

2'4" X 8" PROMASTER RADIAL DRILLMODEL: 28, S/N: 7361, NEW: 1980's :DIAMETER OF COLUMN. 8"FACE OF COLUMN TO CENTER OF SPINDLE. 8"MIN FACE OF COLUMN TO CENTER OF ...more

Drilling Capacity: 2.44", Tapping Capacity, Cast-Iron: M 52, Tapping Capacity, Steel: M 46, Drilling Depth (Max.): 12", Throat: 14" – 63", Spindle Nose-To-Table Surface Distance: 14" ...more

2' 7" x 10" SOUTH BEND / FORADIA GF-50-800 RADIAL DRILL, MANUFACTURER - SOUTH BEND / FORADIA, ARM LENGTH - 2' 7", DRILLING CAPACITY, MILD STEEL - 2", DRILLING CAPACITY, CAST IRON - ...more

COLUMN DIAMETER --------------- 12 in, SPINDLE TO COLUMN MAX --------- 40 in, SPINDLE TO COLUMN MIN --------- 7 in, SPINDLE TRAVEL ALONG ARM (TOTAL)33 in, BASE SURFACE TO SPINDLE MAX --- 48 ...more

Donau 35 1/2″ Sliding Radial Arm Drill, Model DR23, Serial # 2183-2, Asset # 13184, Drill Capacity Steel C.I.,.003 1-1/8” 1-1/4”,.006 7/8” 1”,.012 ” ...more

YouTube Video: : Drilling Capacity.1" Cast Iron Tapping Capacity.SAE 3/4" Cast Iron Spindle. 3 Morse Taper Diameter Of Column.7" Length Of Arm.3' Spindle Travel.10-1/2" Diameter Of ...more

33.5" X 47 – 5/8" Capacity Radial Drill Press with Hardened & Ground Arm Slideways, Electric Elevation Drive, T-Slots and Drain Channel in Base Casting, Box Table ...more

, Nice older machine, all speeds and feeds work, Head is quiet But there is a crack in the casting by the column, it does not seem to effect the operation of the drill.see pictures, 18" x ...more

SERIAL. 1R 2295, ARM LENGTH. 4', COLUMN DIAMETER. 9", DUAL BASE. YES, AREA OF EACH BASE. 30" X 48", HEAD RADIUS, MINIMUM/MAXIMUM. 16.5" TO 43", SPINDLE TO BASE, MINIMUM/MAXIMUM. 15.75" ...more

Carlton 3' 9" Radial Drill Press, Arm Length: 36", Column Diameter: 9", Max Height Under Arm: 48", Spindle Speeds (12): 30 TO 1500 RPM, Feeds:.004 TO.025 IPR, Spindle Diameter: 2-1/2" ...more

Enco 9" Column x 36" Arm, Speeds 8. 80 to 2000 RPM, 2 HP 220 Volt 3 PH, Box table 16" x 18", Bilt in coolant pump in base, Model 128-4010, Arm Length 3' Column Dia. 9" Power 2 hp ...more

3'9" IKEDA RADIAL DRILL, Manufacturer IKDEDA Model RMS--9 Condition Used Serial Number 77074 Stock Number 29532.

Stock #: JB-B-210008, Location: Mid-West, Brand: Cincinnati, Model: 3' x 10", Approx. Shipping Weight: 2,800 Lbs., Loading Fee: Rigging Required, Motor: 3 HP, Column Diameter: ...more

Manufacturer:American, Model:3X9, Condition:Used - Good, Year:1969, Stock #:D570068, Status:For Sale, Serial #:77269-69, 3' X 9" Used American Radial Drill, Arm Length 3', Column ...more

ARBOGA 40" x 9" Radial Arm Drill RLM3512, Max. Distance Spindle Center to Column Face: 39 3/4", Min. Distance Spindle Center to Column Face: 14 5/8", Max. Distance ...more

4' X 9" CARLTON RADIAL DRILLMODEL: 1A, S/N: 1A-3714, NEW: 1962…nbsp; :ARM LENGTH. 4'…nbsp;DIAMETER OF COLUMN. 9"MAX. / MIN. SPINDLE RADIUS. 4'7" / ...more

Arm Length48 inchesColumn Dia.9 inches, ARM 48", COLUMN 9".

We are pleased to offer, subject to prior sale and our conditions of sale, the following for your consideration:, Almost New Only 1202 Hours on the Meter!, Pre-Owned Carlton 4’ x ...more

Arm Length: 4′, Column Diameter: 9″, Spindle Speeds (9): 60 – 1,500 RPM, Spindle Nose: #4 MT, Spindle Quill Travel: 12″, Spindle Quill Feeds (6): 0.006″ ...more