go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Sliding & Gap Bed Lathes

warning
1 - 50 of 249 listings

50" /130" x 362" LeBlond #4025-36, heavy duty sliding bed gap lathe, 58" chk, 4-jaw, 3" hole, Newall TB211000 digital read out, 15" Steady Rest

Yoder Brothers Machinery | Holland, OH
Seller: Yoder Brothers Machinery
Location: Holland, OH
Mfr: Leblond
Model: 4025-36
SERIAL. 3NK-848, MODEL. 4025-36, SWING OVER BED. 50", SWING IN THE GAP. 130", SWING OVER CROSSLIDE. 28", SWING OVER CROSSLIDE. 65", CHUCK SIZE. 58" 4-JAW, DISTANCE BETWEEN CENTERS. 230" TO 362", POWERED SLIDING BED. YES, SPINDLE BORE DIAMETER. 3", SPINDLE SPEEDS. 5.4 TO 600 RPM, VARIABLE SPEED DRIVE. YES, DIGITAL ...more

8" x 54" Nardini #MS-1440E, Lathe, 6" Collet Chuck, 2" Bore, 110/220 V, w/DRO

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Nardini
Model: MS 1440E
Inventory No. 0525-043-0001 Manufacturer Nardini Model No. MS 1440E Name Nardini Ms 1440e Lathe Arrival Date 05-23-2025 Dimensions L x W x H (inches) 40 x 82 x 64 Capacity 8"X54" Electrical 3/60/110/220 Weight (lb.) 2335 Category Machine Tools Condition Used Available Quantity 1 Item 2" Bore, 6" Collet Chuck, Digital ...more

13"/17" x 30" Clausing Metosa #C1330, gap bed engine lathe, 8" Bison 6-jaw chuck, 1-5/8" bore, D1-5, Newall DP7 digital read out, inch/metric threading, quick change toolpost

Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Clausing
Model: C1330
Spec Sheet:, Model # C1330, Serial # 34449, Swing over bed- 13-3/16, Swing in the Gap- 17 3/16", Swing over carriage- 12-3/16, Swing over cross slide- 6-7/8, Between Centers- 30", Bed width- 10, Spindle bore- 1-5/8, Spindle taper- D1-5 Camlock, Spindle Morse taper - #4 Morse, Longitudinal feeds- (44).0018 -.026, Cross ...more

13" x 36" Clausing #Colchester-8013, Gap Bed Engine Lathe, 3 HP, 1800 RPM, 220 V.

Alternative Machine Tool Inc | Dousman, WI
Seller: Alternative Machine Tool Inc
Location: Dousman, WI
Mfr: Clausing
Model: COLCHESTER-8013
Swing Over Bed Ways: 13.0” Swing in Gap: 18.0” Swing Over Cross Slide: 8.0” Distance Between Centers: 36.0” Spindle Bore: 1.562” Spindle Nose: L-0 Tapered Spindle Horsepower: 3/1.5 Hp Spindle Speed: (16) 40 – 1,800 RPM Tailstock Taper: 3 MT Voltage: 220/3/60 Only Machine Weight: ...more

13" x 36" Cleveland #1366, Sliding Gap Bed Engine Lathe, 13" Swing, 2500 RPM, 8" Chuck, 3 HP

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cleveland
Model: 1366
SERIAL. 12354, MODEL #1366, SWING OVER WAYS. 13", SWING OVER CROSS SLIDE. 8", SWING IN GAP. 18", GAP LENGTH IN FRONT OF FACE PLATE. 6", CENTER DISTANCE. 36", SPINDLE SPEEDS (VARIABLE). 65 TO 2500 RPM, ENGLISH FEEDS.0024 TO 1.00, ENGLISH THREADS. 4 TO 112 TPI, METRIC THREADS.25 TO 32 TPMM, HOLE THRU SPINDLE. 1-1/2" ...more

Get email updates for newly added Sliding & Gap Bed Lathes

Sliding & Gap Bed Lathes (also known as gap lathes or extended bed lathes) are machines designed for machining large or irregularly shaped workpieces. Featuring a removable or adjustable bed section, they accommodate parts with larger diameters. Commonly used in metalworking, shipbuilding, and heavy machinery industries, these lathes are essential for handling oversized components with precision.

13"/14" x 39" Southbend #G-26T, engine lathe, 3-jaw chuck, 54-2000 RPM, 2-Axis digital read out, 2000

Yoder Brothers Machinery | Holland, OH
Seller: Yoder Brothers Machinery
Location: Holland, OH
Mfr: Southbend
Model: G-26T
Year: 2000
SERIAL. 16DF-2077, NEW. 05/2000, MODEL. G-26T, SWING. 12", SWING IN GAP. 14", CENTER DISTANCE. 39", SPINDLE SPEEDS. (12) 54 TO 2000 RPM, THREADING. (40) 4 TO 112 TPI, FEEDS.0017 TO.0468 IPR, METRIC THREADS.25 TO 9 MM, DIGITAL READ OUT. 2 AXIS, CHUCK. 3 JAW, TAIL STOCK. #2 MT, MOTOR. 2 HP.

13"/19" x 40" Acer Group #Dynamic-1340G, Precision Gap Bed Lathe w/DRO, 54" L Bed, 7.5" width Bed, 7-5/8" width Gap, 80-2000 RPM (9 Steps), 3 HP, Inch/Metric, Taper

Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Acer
Model: DYNAMIC-1340G
Spec Sheet:, 13/19" x 40 Acer Dynamic 1340G Precision Gap Bed Lathe w/DRO, Taper, Inch/Metric, Model: Dynamic 1340G, Swing over Bed: 13", Swing over Gap: 19 1/4", Distance between Centers: 40", Bed Length: 54", Bed Width: 7 1/2", Width of Gap: 7 5/8", System: Inch w/Metric Change Gears, Headstock:, Spindle Bore ...more

13"/18.5" x 40" Acra #1300BV, precision engine/tool room lathe, AC variable speed, inch/metric thread, 2024

Myers Technology Co LLC | Elk Grove Village, IL
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Acra
Model: 1300BV
Year: 2024
Acra 1300 BV Precision Engine Lathe, AC variable speed, 40-2,000 RPM, New Precision Engine lathe Acra ATEL 1300BV With inch/Metric threading, Variable Speed, D1-4 Spindle nose, 1.9/16" Spindle Bore, 40 - 2,000 RPM, Swing over bed 13", Swing in gap 18 - 1/2", Swing over cross slide 8 - 5/16", Spindle Bore 1 - 9/16" ...more

13"/19.25" x 40" Acra Turn #1340, gap bed engine lathe, 6" 6-jaw chuck, collet chuck, 1.5" bore, D1-4 Camlock, 3 HP, 45-1800 RPM, 1994

Alternative Machine Tool Inc | Dousman, WI
Seller: Alternative Machine Tool Inc
Location: Dousman, WI
Mfr: Acra
Model: 1340
Year: 1994
Swing Over Bed Ways: 13.0” Swing Over Cross Slide: 7.5” Swing in Gap: 19.25” Distance Between Centers: 40.0” Spindle Bore: 1.5” Spindle Nose: D1-4 Camlock Spindle Horsepower: 3 Hp Spindle Speed: (12) 45 – 1,800 RPM Tailstock Taper: 3MT Voltage: 220 – 3 Phase Machine Weight ...more

13"/18" x 40" Acra #Turn-1340, Engine Lathe, 1.5" spindle bore, 3 HP, 45-1800 RPM

Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Acra
Model: TURN-1340
13" X 40" Engine Lathe, Swing Over Bed: 13", Swing Over Cross Slide: 7.5", Swing in Gap: 18", Distance Beetween Centers: 40", Spindle Bore: 1.5", Spindle HP: 3 HP, Spindle Speed: 45 - 1800 RPM, ***We strongly encourage personal inspection of all pieces of used equipment***, ***All ...more

13"/19" x 40" Harrison #M300, geared head gap bed lathe, 5C collet chuck, 1-9/16" spindle bore, D1-3 Camlock, #3MT, 40-2500 RPM

Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Harrison
Model: M300
, The M300 is a full-function machine capable of the entire range of turning operations., Spec Sheet:, Centers:, Height: 167mm (6-3/16), Admit Between: 635/1000mm (25/40), Swing:, Over Bed: 330mm (13), Over Cross Slide: 210mm (8-1/8), In Gap Diameter: 480mm (19), Length: 117mm (4-5/8), Spindle:, Bore: 40mm (1-9/16) ...more

13"/19" x 40" Sharp #1340F, gap engine lathe, 8" Bison chuck, 3-jaw, 1.5" bore, 1800 RPM, D1-4, 1999

Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Sharp
Model: 1340F
Year: 1999
SHARP 1340F 13”/19” x 40”cc Precision Gap Lathe 1999’ #7120, SHARP 1340F 13”/19” x 40”cc Precision Gap Lathe 1999’ #7120, Reference #7120, Model # 1340F, Serial # 23709, Year of manufacture- 1999’, Swing over bed- 13”, Swing in gap- 19”, Distance ...more

13"/18.7" x 40" Victor #1340GHE, engine lathe, 8" chuck, tailstock, 2000 RPM, 3 HP, inch/metric dials, 1997

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Victor
Model: 1340GHE
Year: 1997
Make: Victor, Model: 1340GHE, Year: 1997, Machine Location: Wisconsin, Maximum Swing: 13″, Distance Between Centers: 40″, Swing Over Cross Slide: 7.75″, Swing In Gap: 18.75″, Spindle Nose: D1-4, Spindle Speed: 2,000 RPM, Spindle Bore: 1.5″, Spindle Motor: 3 HP, Tailstock, 8″ Chuck ...more

13" x 40" Promaster #TNP-160, Engine Lathe, 22" gap, 1.875" bore, 3 HP, 45-2000 RPM

Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: TNP-160
PROMASTER TNP 160 Engine Lathe #7788 #1, Swing Over Bed: 13", Swing in Gap: 22", Distance Between Centers: 40", Spindle Bore: 1.875", Main Motor: 3 HP, Spindle Speeds: 45 to 2,000 RPM.

13"/16" x 41" Acer #Dynamic-1340G, Gap Bed Lathe, w/Compound Rest, Steady Rest & Tail Stock, 6" 3-Jaw Chuck, 1.5" Bore, 3 HP, 1720 RPM, 460 V

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Acer
Model: DYNAMIC 1340G
Inventory No. 0225-042-0015 Manufacturer Acer Model No. DYNAMIC 1340G Name Acer Dynamic 1340g Gap Bed Lathe Arrival Date 03-05-2025 Dimensions L x W x H (inches) 77 x 36 x 56 Capacity 13"/16" X 41" Electrical 3/60/460 Weight (lb.) 1130 Category Machine Tools Condition Used Available Quantity 1 Serial No. 96040322 Item ...more

13"/15" x 43" Acer #Dynamic-1340G, Gap Bed Lathe, w/Tail Stock & Compound Rest, 1996

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Acer
Model: DYNAMIC 1340G
Year: 1996
Inventory No. 0225-042-0020 Manufacturer Acer Model No. DYNAMIC 1340G Name Gap Bed Lathe Arrival Date 03-20-2025 Dimensions L x W x H (inches) 74 x 36 x 74 Capacity 13" /15" X 43" Weight (lb.) 1025 Category Machine Tools Condition Used Available Quantity 1 Serial No. 96040321 Make Year 1996 Item W/compound Rest, Tail ...more

14"/21" x 40" Acer #1440G, engine lathe, 1-9/16" hole, D1-4 Camlock, inch/metric, Newall 2-Axis digital read out, steady & follow, 2006

Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Acer
Model: 1440G
Year: 2006
14"/21" x 40" ACER GAP BED ENGINE LATHEMODEL: 1440G, S/N: N6120343, YEAR: 2006 :SWING OVER BED. 14"SWING IN REMOVEABLE GAP. 21"SWING OVER CROSS SLIDE. 9"HOLE THRU SPINDLE. 1-9/16"DISTANCE BETWEEN CENTERS. 40"SPINDLE NOSE. D1-4"CAMLOCKSPINDLE SPEED RANGE (8). 85 - 2000 ...more

14"/18" x 40" Acer #Dynamic-1440E, Gap Bed Lathe, 6" 3-Jaw Chuck, 460 V, w/Acu-Rite digital read out, Toolpost, Tailstock, 2000

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Acer
Model: DYNAMIC 1440E
Year: 2000
Inventory No. 0525-106-0005 Manufacturer Acer Model No. DYNAMIC 1440E Name Gap Bed Lathe Arrival Date 06-04-2025 Dimensions L x W x H (inches) Unavailable Capacity 14" / 18" X 40" Electrical 3/60/230/460 Weight (lb.) 1200 Category Machine Tools Condition Used Available Quantity 1 Serial No. N0060423 Make Year 2000 ...more

14"/21" x 40" Acra #1440TVS, variable speed engine lathe, 8" 3-jaw chuck, 2.0625" bore, 5 HP, 2500 RPM, D1-6, Acurite 2-Axis digital read out, steady & follow, 2015

Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Acra
Model: 1440TVS
Year: 2015
ACRA 1440TVS 14”/21” x 40”cc Variable Speed Lathe DRO 2015’ #7529, ImperialMetricSwing 14.188" 360.36 mm Centers 40" 1,016 mm Spindle Bore 2.0625" 52.388 mm Power 5 hp 3.7 kW RPM 2,500 RPM 2,500 RPM Swing Over Cross Slide 8.375" 212.72 mm Dimensions 93” x 36” x ...more

14"/20" x 40" Atrump #LD-1440, hardened & ground bed ways, 6" 3-Jaw scroll chuck, 3 HP, new, #SMLD1440

Sterling Machinery Exchange - New Mach. | South El Monte, CA
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Atrump
Model: LD-1440
Swing Over Bed 14" Swing Over Gap 20-3/4" Swing Over Saddle 8-3/4" Distance Between Centers 40' Bed Width of Bed Ways 7-9/16" Top Slide Travel 4" Cross Slide Travel 6-1/2" Spindle Spindle Nose Mounting STD: D1-4 Spindle Bore 1-1/2" Spindle Nose Taper & Sleeve Outer M.T. #5, Inner M.T. #3 Range Of Spindle Speeds 9 ...more

14"/19" x 40" GMC #GML-1440BGF-1, 6" 3-Jaw chuck, 8" 4-Jaw chuck, 10" face plate, 3.75" Steady Rest, foot brake, cooolant, New

Sterling Machinery Exchange - New Mach. | South El Monte, CA
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Gmc
Model: GML-1440BGF-1
Capacity 14" x 40" Length of Work Piece 40" Length of Cutting 34" Swing Over Cross Slide 8-1/4" Swing in Gap 19-1/4" Width Of Bed 7-1/2" Gap to Spindle 6-1/2" Gap to Chuck Jaws 3-5/8" Spindle Bore 1-1/2", D1-4 Taper of Spindle Center MT#5 Spindle Speeds 70 - 2000 rpm / 8 Steps Longitudinal Feeds 0.00168-0.11750 IPV / ...more

14" x 40" GMC #GML-1440HD, gap bed engine lathe, 8" 3-jaw chuck, 10" 4-jaw chuck, 2-1/16" bore, D1-6, 5.5" Steady Rest, 2" follow rest, Sino digital read out

Manufacturing Solutions | Santa Ana, CA
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: GML-1440HD
, SINO DRO; InstalledTaper turning attachment; InstalledMetal chuck guard with safety shut down when lifting chuck guard8” 3-jaw chuck with one set reversible jaws10” 4-jaw chuck12” Face plate5 1/2” large steady rest with roller jawsOil pump on Apron for all guideways and leadscrews2” ...more

14" x 40" GMC # GML-1440HD, Bed Gap Lathe, 6 HP, 1800 RPM, 14-7/8" Swing, 3-1/2" Chuck

Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: GML-1440HD
New GMC 14 x 40 Gap Bed Lathe with SINO DRO GML-1440HD, The 14" x 40" Gap Bed Lathe with SINO DRO is the best machine money can buy. Fully a Taper Attachment, 8 3-jaw chuck with one set reversible jaws, 10 4-jaw chuck, 12 Face plate, 5 1/2 large steady rest with roller jaws, 2 follow rest, 4-way tools post, Foot brake ...more

14"/23" x 40" Goodway #GW-1440, engine lathe, 1.5" spindle bore, 83-1800 RPM, inch/metric thread

Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Goodway
Model: GW-1440
Swing Over Bed 14 inches Swing in Gap 23 inches Swing Over Cross Slide 8.25 inches Distance Between Centers 40 inches Spindle Bore 1.5 inches Spindle Speeds (12) 83 to 1,800 RPM Spindle Nose D1-5 Hole Through Spindle 1.625 inches Cross Slide Travel 8 inches Feeds 0.001 -.020 IPR Threads Inch 4- 56 TPI Threads Metric ...more

14"/20" x 40" Grizzly #GO554, gap bed gearhead engine lathe, 6" 3-jaw chuck, 8" 4-jaw chuck, 1-1/2" bore, D1-4 Camlock spindle nose, 40-1800 RPM, 12" faceplate, steady & follow

TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Grizzly
Model: GO554
This fully equipped, heavy-duty floor lathe will handle just about anything you can throw at it. Check out all the s and and then look at the price again and you'll agree, this is one machine that's tough to beat!.

14"/23" x 40" Jet #1440-3PGH, engine lathe, 10" 3-jaw chuck, 3-1/8" hole, 40-1600 RPM, D1-8, inch/metric, steady & follow, 7.5 HP

Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Jet
Model: 1440-3PGH
14"/23" X 40" JET GAP BED ENGINE LATHE MODEL: 1440-3PGH, S/N: 95-11-0287, NEW: 2000's :SWING OVER BED. 14"SWING OVER GAP. 23-5/8"SWING OVER CROSS SLIDE. 7-1/8"DISTANCE BETWEEN CENTERS. 40"SPINDLE HOLE.″-1/8"SPINDLE NOSE, CAMLOCK, SIZE. D1-8"WIDTH OF BED. 11" ...more

14"/30" x 40" Jet #GH-1440W-3, gap lathe, 6" 3-jaw chuck, 1-1/2" bore, 12" faceplate, Acurite 2-Axis digital read out, Aloris tool post & (3) holders, steady & follow

Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Jet
Model: GH-1440W-3
Year: 2012
JET GH-1440W-3 14”/20” x 40”cc Gap Lathe 2012’ #7320, JET GH-1440W-3 14”/20” x 40”cc Gap Lathe 2012’ #7320, Reference # 7320, Model # GH-1440W-3, Serial # 803N2322, Year of manufacture- 2012’, Swing over bed- 14”, Swing over gap- 20”, Swing over cross ...more

14" x 40" Kent USA #KLS-1440, Gap Engine Lathe, 6" chuck

GTH Used Machinery Intl | Pico Rivera, CA
Seller: GTH Used Machinery Intl
Location: Pico Rivera, CA
Mfr: Kent
Model: KLS-1440

14"/20.5" x 40" MSC #14-40G-Valuemaster, engine lathe, 3 & 4 jaw chuck, 2-1/16" hole, 22-1200 RPM, D1-6, inch/metric, Acu-Rite 2-Axis digital read out, steady & follow, 2000

Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Msc
Model: 14-40G-VALUEMASTER
Year: 2000
14"/20" x 40" MSC VALUEMASTER ENGINE LATHEMODEL: 14-40G,… S/N 1JG-709,… NEW: 2000's :SWING OVER BEDWAYS. 14-1/2"SWING IN REMOVEABLE GAP. 20-1/2"SWING OVER CROSS SLIDE. 9-1/2"HOLE THRU SPINDLE. 2-1/16"DISTANCE BETWEEN CENTERS. 40"SPINDLE NOSE. D1-6" ...more

14"/20.5" x 40" MSC #14-40G-Valuemaster, engine lathe, 3 & 4 jaw chuck, 2-1/16" hole, 22-1200 RPM, D1-6, inch/metric, Acu-Rite 2-Axis digital read out, steady & follow, quick change toolpost, 2000

Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Msc
Model: 14-40G-VALUEMASTER
Year: 2000
14"/20" x 40" MSC VALUEMASTER ENGINE LATHEMODEL: 14-40G, S/N 1JA-213,… NEW: 2000's :SWING OVER BEDWAYS. 14-1/2"SWING IN REMOVEABLE GAP. 20-1/2"SWING OVER CROSS SLIDE. 9-1/2"HOLE THRU SPINDLE. 2-1/16"DISTANCE BETWEEN CENTERS. 40"SPINDLE NOSE. D1-6" CAMLOCKSPINDLE ...more

14" x 40" National, gap bed engine lathe, 2 steady rests, tool holder

Die-Matic Tool & Machinery Inc. | Meridianville, AL
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: National
NATIONAL LATHE, GAP-BED, AXIS: 14"X 40", TOOL HOLDER, STEADY REST, LISTING ID#25547.

14"/23" x 40" Republic-Lagun #RL-1440-TW-EVS-A, High Speed Precision Gap Bed Lathe, 3.375" Cross Slide, 2.066" Spindle Bore, D1-6 Camlock, 20-400 RPM Low, 400-2500 RPM High, 5 HP, 220 V

Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Republic-Lagun
Model: RL-1440-TW-EVS-A
Republic Lagun 14″ x 40″ High Speed Precision Gap Bed Lathe, RL-1440-TW-EVS-A, Inventory # 9754, Model: RL-1440-TW-EVS-A, S/N: 14486040305, Built in the USA, Swing Over Bed: 14 3/16″, Swing in Gap: 23″, Swing Over Cross Slide: 8 3/8″, Distance Between Centers: 40″, Spindle Bore: ...more

14"/21" x 40" Vectrax #1440EVS, engine lathe, 9" chuck, 3-jaw, 2" bore, 20-2500 RPM, D1-6, Anilam 2-Axis digital read out, variable speed, 5.5" Steady Rest, follow, 2007

Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Vectrax
Model: 1440EVS
Year: 2007
VECTRAX 1440EVS 14”/21” x 40”cc Variable speed Lathe 2007’, VECTRAX 1440EVS 14”/21” x 40”cc Variable speed Lathe 2007’ #GMT-3893, Reference #GMT-3893, Model # 1440EVS, Serial # 14407101681, Year of manufacture- 2007’, Swing over bed- 14”, Swing over gap- ...more

14"/22" x 40" Willis #1440, 1-5/8" bore, 70-2000 RPM, inch/metric, 5 HP, D1-5, foot brake

C.W. Wood Machinery Inc | Cincinnati, OH
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Willis
Model: 1440
(NEW) WILLIS GAP BED ENGINE LATHE, MODEL: 1440, FACTORY, Swing Over Bed: 14-1/4", Swing In Gap: 22", Distance Between Centers: 40", Spindle Speeds: (8) 70 - 2000 RPM, Spindle Bore: 1-5/8", Spindle Nose: D1-5, Threads, Inch: (36) 4 - 72 TPI, Threads, Metric: (27).4 - 7 mm, Longitudinal Feeds:.0012" -.016", Cross ...more

14"/16" x 41" Vectrax #82837915, Gap Bed Lathe, w/Tail Stock & Compound Rest, 6" 3-Jaw Chuck, 1.5" Bore, 2003

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Vectrax
Model: 82837915
Year: 2003
Inventory No. 0525-009-0003 Manufacturer Vectrax Model No. 82837915 Name 2003 Vectrax 82837915 Gap Bed Lathe Arrival Date 05-08-2025 Dimensions L x W x H (inches) Unavailable Capacity 14"/16" X 41" Weight (lb.) 1061 Category Machine Tools Condition Used Available Quantity 1 Serial No. 678909 Make Year 2003 Item 1 1/2" ...more

14"/20" x 42" Nardini #Mascote-MS1440, toolroom lathe, 8" 3-jaw chuck, 10" 4-jaw chuck, 1-13/16" hole, 31.5-2500 RPM, D1-5, Acu-Rite 2-Axis digital read out, #3MT, steady & follow,

Greenway & Associates Ltd | Orange City, IA
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Nardini
Model: MASCOTE-MS1440
, Acu-Rite 2 axis DRO Follow rest, 8" 3 jaw chuck w/reversable top jaws Thread dial, Taper attachment Chuck guard, 10" 4 jaw chuck Coolant, Steady rest Manuals, Manufacturer Nardini 1440 Toolroom Lathe Model Mascote MS1440 Condition Used Serial Number D4-JEV983 Stock Number 11026 Swing over bed 14" Swing in gap ...more

14.9" x 40" GMC #GML-1440HD, Heavy-Duty Precision Gap Bed Lathe, 10.25" width Bed, 10" 4-Jaw & 8" 3-Jaw Chucks, 2.06" Spindle Bore, 6 HP, 45-1800 RPM, 220 V, new

Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Gmc
Model: GML-1440HD
GMC 14″ x 40″ Heavy-Duty Precision Gap Bed Lathe, GML-1440HD, Inventory # 9353, Model: GML-1440HD, Max. Swing Over Bed: 14 7/8″, Max. Length of Workpiece: 40″, Max. Swing Over Cross Slide: 10 1/16″, Max. Swing in Gap: 23 1/4″, Width of Bed: 10 1/4″, Effective Length in Gap to ...more

15"/23" x 40" Nam Nam Sun #YMZ-1540G, Engine Lathe, 1.5" spindle bore, 40-2000 RPM, 3-Jaw chuck

Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Nam Sun
Model: YMZ-1540G
Nam Sun YMZ-1540G Engine Lathe 15"/23" x 40" #7060 #1, Swing Over Bed: 15-3/4, Swing Over Cross Slide: 8-7/8, Swing Over Gap: 23-5/8, Distance Between Centers: 40, Spindle Bore: 1.575, Spindle Speed Range: 40 2000 RPM, Inch Threads: 4 56 TPI, Metric Threads :0.5 7 mm Pitch, Motor HP: 5, Electrical: 230V/3PH, Approx. ...more

15"/20" x 40" Nardini Mascote #MS-1440E, gap bed engine lathe, 10" Rohm 3-jaw chuck, #3MT, D1-5, Acu-Rite 2-Axis digital read out, inch/metric, coolant

Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Nardini
Model: MS-1440E
, 14"/20" x 40" Nardini Mascote MS 1440 E Gap Bed Engine Lathe, Spec Sheet:, To the best of our knowledge all listed below are deemed correct., It is the buyers responsibility to confirm all and we encourage an inspection of the machine(s) and accessories prior to purchase., Swing Over Ways: 14", Swing Over The Gap: ...more

15" x 40" Nishimori #NA-6, gap bed engine lathe, 9" swing over cross slide, inch/metric, 6-jaw 8" chk, 3 HP, #74776

Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Nishimori
Model: NA-6
Year: 1984
SERIAL. 6D-51, MODEL. NA-6, SWING OVER WAYS. 15", SWING IN GAP. 24", SWING OVER CROSS SLIDE. 9", DISTANCE BETWEEN CENTERS. 40", SPINDLE SPEEDS. 39 TO 1000 RPM, FEEDS.0067 TO.027 IPR, THREADS (ENGLISH). 4 TO 28 TPI, THREADS (METRIC). 1 TO 7 MM, DIAMETER OF SPINDLE HOLE. 1-3/4", 6 JAW CHUCK. 8", STEADY REST 3 POINT. ...more

15"/17" x 41" #14-40G, gap lathe, AcuRite digital read out

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Model: 14-40G

15"/20" x 42" Nardini #MS-1440E, Gap Bed Lathe, 8" 3-Jaw Chuck, 2" Bore, 4.8 kW, 220 V, w/Tooling, Follow Rest, Tailstock, Steadyrest

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Nardini
Model: MS 1440E
Inventory No. 0525-101-0002 Manufacturer Nardini Model No. MS-1440E Name Nardini Ms-1440e Gap Bed Lathe Arrival Date 05-28-2025 Dimensions L x W x H (inches) 78 x 36 x 48 Capacity 15"/20" X 42" Electrical 3/60/220 Weight (lb.) 2375 Category Machine Tools Condition Used Available Quantity 1 Serial No. C1HH0MS153 Item ...more

15"/23" x 50" Clausing #8044VSJ, variable speed lathe, 10" 3-jaw chuck, 2.12" bore, 15-2500 RPM, D1-6 Camlock, #4MT, Acu-Rite 2-Axis digital read out, Aloris tool post, Steady Rest, 2017

Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Clausing
Model: 8044VSJ
Year: 2017
CLAUSING COLCHESTER 15”/23” x 50”cc Variable Speed Lathe 2017’ #7448, CLAUSING COLCHESTER 15”/23” x 50”cc Variable Speed Lathe 2017’ #7448, Model # 8044VSJ, Serial # SG3046, Year of manufacture : 2017, Swing over bed ways: 15.75”, Swing in gap: 23", Swing over ...more

15"/24" x 50" Clausing #C1550J, toolroom lathe, 10" 3-jaw chuck, 2.125" bore, 25-2000 RPM, D1-6, Steady Rest, 4-way toolpost

Greenway & Associates Ltd | Orange City, IA
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Clausing
Model: C1550J
, 10" 3 jaw chuck, Steady rest, Micrometer bed stop, 4 way tool post, Work light, Removable chip try, Manufacturer Clausing 15" x 50" Toolroom Lathe Model C1550J Condition New Serial Number J11008241 Stock Number 10744 Swing over bed 15.25" Swing in gap 24" Swing over cross slide 9.5" Distance ...more

15" x 50" Clausing #Triumph-2000, Gap Engine Lathe, 9.5" swing over cross slide, 21" swing gap, 2.125" spindle bore, 60-2000 RPM, 3 jaw 10" chuck, 7.5 HP

Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Clausing
Model: TRIUMPH-2000
Year: 1900
Make: Clausing Colchester, Model: Triumph 2000, Year: 1900, Machine Location: Upon Request, Max. Swing Over Ways: 15″, Max. Swing Over Cross Slide: 9.5″, Swing in Gap: 21″, Max. Center Distance: 50″, Hole Thru Spindle: 2.125″, Spindle Speeds: 60-2,000 RPM, Threading Capability: Standard ...more

15" x 50" Clausing #VT1411/14, variable speed gap bed professional lathe, 2003

Orca Machine Tools Inc. | Fridley, MN
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Clausing
Model: VT1411/14
Year: 2003
Distance Between Centers 50” Swing in Gap 23 inches Swing over Bed 15.7 inches Swing Over Cross Slide 9.7 inches Spindle Bore 2.125” Spindle Nose D1-6” Camlock Spindle Speeds 15-2500 RPM Threads Inch /Metric 2-56 TPI /.2-14 mm Tailstock Taper No. 4 MT Motor – Spindle 10 HP Voltage Both 415/3PH ...more

15"/17" x 55" Jet #Jet-1550, Gap Bed Lathe, 2" bore, tailstock, compound rest

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Jet
Model: JET-1550

15" x 56" South Bend #Nordic-15", 3-jaw 8" chuck, taper attach, 40-2000 RPM, steady rest

Mohawk Machinery Inc | Cincinnati, OH
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: South Bend
Model: NORDIC-15
15" X 56" SOUTH-BEND "NORDIC 15" GEARED HEAD, ENGINE LATHE, Serial No. DN15770731N67, Model CL150E, Series "Nordic 15", Taper Attachment, 8" 3-Jaw Chuck w/Jaws - Steady Rest, Geared Head w/Hardened & Ground Gears, Hardened & Ground Bed Ways, #D1-6" Cam-Lock Spindle Nose ...more

15.25"/24" Acra #Atel-1550C, engine lathe, inch/metric thrdg, 8" 3-Jaw chuck, 10" 4 Jaw chuck, Steady Rest, new 2024

Myers Technology Co LLC | Elk Grove Village, IL
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Acra
Model: ATEL 1550C
Year: 2025
Acra 15 X50 C Precision Engine Lathe, New Precision Engine lathe Acra ATEL 1550C, Automatic Feed And Threading, Fully Interlocked, Saddle And Top Slide Locking System. Dynamically Balanced, Hardened And Precision Ground. Supported By 2 Precision Taper Roller Bearings And One Ball Bearing.Base One Piece Casting ...more

15.7"/23" x 50" Clausing #600-15, engine lathe, 10" chk, 3-jaw, 2-1/8" bore, Acu-Rite 2X Turn D200 digital read out, 1999

Yoder Brothers Machinery | Holland, OH
Seller: Yoder Brothers Machinery
Location: Holland, OH
Mfr: Clausing
Model: 600-15
Year: 1999
Weight3800 pounds, SERIAL. TG0387 MODEL. CLAUSING 15 SWING OVER BED. 15.7" SWING OVER CROSSSLIDE. 9.7" SWING OVER GAP. 23" DISTANCE BETWEEN CENTERS. 50" SPINDLE NOSE. D1-6 SPINDLE BORE. 2 1/8" SPINDLE SPEEDS. 16 / 25-2000 RPM DRO. ACU-RITE MODEL2X TURN D200 CHUCK SIZE. 10" 3-JAW MAIN DRIVE MOTOR. 7.5 HP.