1 - 50 of 84 listings
5" x 26" Wyssmont multi-screw twin screw feeder
Cooper Industries Llc | Millwood, WV
Category: Feeding and Straightening Machines
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Wyssmont
ITEM 2576: 5” x 26” OPENING WYSSMONT MULTISCREW TWIN SCREW FEEDER, TWIN 2” DIAMETER SCREWS X 24” TO DISCHARGE CENTER., SERIAL MSF-058, STAINLESS STEEL MATERIAL CONTACT PARTS, THREE PURGE FITTINGS FOR ADDITION OF NITROGEN, STAINLESS CONTACT PARTS, UL ELECTRIC MOTOR NO F S857437.
6" x .08" Air Feeds Inc. #AF-6X6, Air Feed-Straightener Combination, 120 SPM
Smith Machinery Co | Ames, IA
Category: Feeding and Straightening Machines
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Air Feeds
Model: AF-6X6
STOCK WIDTH --------------------------------- 3/8 TO 6 in, MAXIMUM STOCK THICKNESS (FULL WIDTH) --------.060 in, MAXIMUM STOCK THICKNESS WIDTH ---------------.080 in, MINIMUM STOCK THICKNESS ---------------------.020 *, FEED STROKE --------------------------------- 0 TO 6-5/8, MAXIMUM STROKES (FULL STROKE) ...more
6" x .093" Cooper Weymouth #DDR66G, 14" length, 200 SPM
Wenco Machinery Corp | Ringwood, NJ
Category: Feeding and Straightening Machines
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Cooper Weymouth
Model: DDR66G
MAX WIDTH 6" MAX FEED LENGTH 14" MAX THICKNESS.093" MAX SPEED 200 SPM.
6" Tishken #6R6, leveler/feeder/straightener, 7-rolls.2" roll diameter, R to L, 1996, #75305
Yoder Machinery Sales | Holland, OH
Category: Feeding and Straightening Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 6R6
Year: 1996
SERIAL. 21474-196, MODEL. 6 R 6, YEAR NEW. 1996, MAXIMUM STRIP WIDTH. 6", NUNBER OF ROLLS. (7) 3 OVER 4, DIAMETER OF ROLLS. 2", FEED ROLL DIAMETER. 4", HORIZONTAL GUIDE ROLLS. ENTY & EXIT, STOCK TRAVEL. RIGHT TO LEFT.
6" Tishken #7R6, leveler/feeder/straightener, 7 rolls 4 over 3, entry pinch rolls, #75073
Yoder Machinery Sales | Holland, OH
Category: Feeding and Straightening Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 7R6
SERIAL. 14939, MODEL. 7R6, NUMBER OF ROLLS. (7) 4 OVER 3, FEED ROLL DIAMETER. 4", WIDTH OF ROLLS. 6", DIAMETER OF LEVELING ROLLS. 2", ENTRY PINCH ROLLS. YES, EXIT ROLLS. YES, MOTOR HORSEPOWER. 3.
Get email updates for newly added Feeding and Straightening Machines
Feeding and straightening machines (also known as coil feeding systems) are specialized machines used to feed coiled materials into processing equipment while straightening any bends or curves. By automating both feeding and straightening, these systems ensure smooth material flow and accurate alignment, making the material easier to work with during subsequent operations.
7.87" x 0.08" Pa Industries #SRF-200U, Servo Feeder & Straightener, 3.6" feed roll diameter, Ultra Edge Control
Wheeler Machinery Sales | Pomona, CA
Category: Feeding and Straightening Machines
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Pa Industries
Model: SRF-200U
P/A INDUSTRIES SRF-200U Servo Feed Straightener #8255 #1, Feed Roll Diameter: 3.55, Max Roll Opening:.138, Maximum Thickness At Full Width:.080 @ 7.87, Electrical: 120V/1PH, Approx. Shipping Weight: 250 Lbs., Approx. Shipping Dimensions: 50 L x 50 W x 64 H, P&A Industries Ultra Edge Servo Roll Feed Controller.
8" x .075" Tishken #6R8, feeder straightener, 5 HP vari-speed
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Tishken
Model: 6R8
MODEL: 6R8, 8" MAXIMUM STOCK WIDTH CAPACITY,.075" MAXIMUM STOCK THICKNESS CAPACITY, 5 HP VARIABLE SPEED MOTOR.
8" x .09" Cooper Weymouth #DDR89GQC, 9" length, 200-800 SPM
Wenco Machinery Corp | Ringwood, NJ
Category: Feeding and Straightening Machines
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Cooper Weymouth
Model: DDR89GQC
MAX STOCK WIDTH 8" MAX STOCK THICKNESS.090" MAX FEED LENGTH 9" THIS IS A DUAL PURPOSE HIGH SPEED FEED. 200 TO OVER 800 SPM FOR SHORT FEED LENGTHS. QC MEANS QUICK CHANGE ROLL FEED. RE-ARRANGE THE DRIVE BY LOCATING THE INDEXER ON THE PROPER SHAFT. CHANGER OVER IS EASY WITH VERY LITTLE EFFORT.
10" x .2" Rowe #A-10, Straightener, 0.20" mild steel thickness, 75 FPM, 1.5 HP
National Machinery Exchange | Newark, NJ
Category: Feeding and Straightening Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Rowe
Model: A-10
0.20" MILD STEEL MAX THICKNESS,.105 MILD STEEL, 25 - 75FPM, 1.5 HP.
12" x .03" Press Room Equipment #S15-12x24-115A, air feeder 5-roll straightener, 24" stroke
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Press Room Equipment
Model: S15-12X24-115A
MODEL: S15 12X24 115A, S: C193-002, 12" WIDE, 24" STROKE,.010-.060 CAPACITY, WHEN NOT USING STRAIGHTNER,.030 WHEN USING STRAIGHTNER, ADJUSTABLE HEIGHT CABINET, 5 ROLL STRAIGHTENER, VERY GOOD CONDITION.
12" x .078" Cooper Weymouth #12A, straightener, 7-rolls, 10-50 FPM
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Feeding and Straightening Machines
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Cooper Weymouth
Model: 12A
Year: 1971
COOPER WEYMOUTH STRAIGHTENER, MODEL: 12A, SERIAL NUMBER: V1271878A, Number Of Rolls: 7, Capacity, Width: 12", Maximum Thickness Capacity:.078", Minimum Thickness Capacity:.015", Speed: 10 - 50 FPM, Electric: 460/60/3, Loop Control, F.O.B. Cincinnati, Ohio, ALL SUBJECT TO VERIFICATION BY PURCHASER.
12" x .09" Littell, powered straightener, 17-roll, Coiltek loop Control, #11501
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Feeding and Straightening Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Littell
Model: 11501
Used 12" x.090" Littell 17 Roll Powered Straightener, Model 212-17PD, 1970. s include 12" max coil width, 0.09" thickness, 17 straightening rolls, and Coiltek loop control., Coil Width: 12, Material Thickness:.090, Straightening Rolls: 17, Motorized, Coiltek Loop Control, Coil Width: 12, Material Thickness:.090 ...more
JUST ADDED!
12" x .093" Jaybird, Air Feeder Straightener, 12" max. width, 12" max. stroke, 5-roll straightener, entry pinch rolls, 2" bore feed cylinder, 90 SPM
Timco Inc | Columbia, TN
Category: Feeding and Straightening Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Jaybird
JAYBIRD 12" X 12" X.093" AIR FEEDER STRAIGHTENER, STOCK# 14498J, 12" MAX WIDTH, 12" MAX STROKE,.020" -.093" THICKNESS, 5 ROLL STRAIGHTENER, ENTRY PINCH ROLLS, ADJUSTABLE HEIGHT CABINET, 2" BORE FEED CYLINDER, 90 SPM MAX, 45" X 40" X 60" T APPROX., 3000 LBS APPROX.
JUST ADDED!
12" x .093" Jaybird, Air Feeder Straightener, 12" max. stroke, 5-roll straightener, entry pinch rolls, 2" bore feed cylinder, 90 SPM
Timco Inc | Columbia, TN
Category: Feeding and Straightening Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Jaybird
JAYBIRD 12" X 12" X.093" AIR FEEDER STRAIGHTENER, STOCK# 14498J, 12" MAX WIDTH, 12" MAX STROKE,.020" -.093" THICKNESS, 5 ROLL STRAIGHTENER, ENTRY PINCH ROLLS, ADJUSTABLE HEIGHT CABINET, 2" BORE FEED CYLINDER, 90 SPM MAX, 45" X 40" X 60" T APPROX., 3000 LBS APPROX.
12" x .125" Cooper Weymouth #SE-12B, feeder & straightener, 3 over 4 rolls, 2" roll diameter, L to R
Yoder Machinery Sales | Holland, OH
Category: Feeding and Straightening Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cooper Weymouth
Model: SE-12B
SERIAL. 41718MODEL. SE 12BCAPACITY.125MAXIMUM STOCK WIDTH. 12"ROLLS. 3 OVER 4ROLL DIAMETER. 2"ENTRY PINCH ROLLS. YESSPEED. VARIABLEDIRECTION. LEFT TO RIGHT.
12" x .125" Dallas Industries #D200, air feeder/straightener, 12" max. feed stroke, manual roll adjustment
G-2000 | Toledo, OH
Category: Feeding and Straightening Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Dallas Industries
Model: D200
SERIAL.: 16604, MODEL.: D200, CAPACITY.: 0.015-.125", MAX MATERIAL WIDTH.: 12", MAX FEED STROKE.: 12", EQUIPPED W:, MANUAL ROLL ADJUSTMENT, ADJUSTABLE ENTRY GUIDE ROLLS, Machine Type.Feeding & Straightening Machines Manufacturer.DALLAS Model.D200 Year.N/A Condition.Used.
12" x .125" Dynamic #2116, bed-mounted stock feeder/straightener, S/N 1448
Smith Machinery Co | Ames, IA
Category: Feeding and Straightening Machines
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Dynamic
Model: 2116
MAXIMUM STOCK WIDTH ------------------- 12 in, MAXIMUM STOCK STROKE LENGTH ----------- 24 in, MAXIMUM STOCK THICKNESS ---------------.125 in AND PRICING SUBJECT TO VERIFICATIONDELIVERY: IMMEDIATE, SUBJECT TO PRIOR SALE.
12" x .125" Rapid-Air #FX6E, Straightener/feeder, 2.25" roll diameter, manual roll adjustment
G-2000 | Toledo, OH
Category: Feeding and Straightening Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Rapid-Air
Model: FX6E
SERIAL.: 131196, MODEL.: FX6E, MAX STRIP WIDTH.: 12", MAX STRIP FEED LENGTH.: 6", MAX THICKNESS.:.125", # OF WORK ROLLS.: 5 (2 OVER 3), WORK ROLL DIAMETER.: 2.25", MANUAL ROLL ADJUSTMENT.: YES, Machine Type.Feeders, Air Manufacturer.RAPID AIR Model.FX6E Year.N/A Condition.Used.
12" x .125" RBI #SP2-12-7, feeder straightener, 7-roll, 24" feed length, entry side guides
D & H Machinery Inc | Toledo, OH
Category: Feeding and Straightening Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Rbi
Model: SP2-12-7
Red Bud Feeder Straightener, Capacity: 12" Wide x 0.020" - 0.125" (Mild Steel), Straightener:, -Model: SP2-12-7, -S/N: SPH90-M0344, -7 Roll Straightener, -Pull Thru 3 over 4, -Independent Top Roll Adjust, -Entry Side Guides, Air Grip Feed:, -Model: FSC6HS12-24, -S/N: CFH90-M0344, -24" Feed Length, Adjustable Passline ...more
12" x .156" Coe Press Equipment #CPRF-518, high strength pull thru combination servo feed straightener, 2015
S & G Press & Machinery Sales | Shelby Township, MI
Category: Feeding and Straightening Machines
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Coe Press Equipment
Model: CPRF-518
Year: 2015
Coil Width 12 inches, Coil Thickness.156 inches, CPRF-518 - Coe 18" Max. Coil Width Servo Roll Feed with CPR - PHS7-12 Pull Thru Straightener, HS Steel - 70,000 PSI Yield - Max: 0.312" thick @ 3.00” wide HS Steel - 70,000 PSI Yield - Min: 0.030" thick @ 12.00" wide HS Steel - 70,000 PSI Yield - Max: 0.187" thick ...more
12" x .157" Feed-Lease #FL-2-12X12RH, feeders/straightener, double air grippers, 5-roll straightener
G-2000 | Toledo, OH
Category: Feeding and Straightening Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Feed-Lease
Model: FL-2-12X12RH
MANUFACTURER. FEED LEASE, MODEL. FL-2-12 X 12, CAPACITY.157" X 12", FEED LENGTH. 12", FEED WIDTH. 12", DOUBLE AIR GRIPPERS, 5 ROLL STRAIGHTENER, Machine Type.Coil Feeders Manufacturer.FEED LEASE Model.FL-2 12X12RH Year.N/A Condition.Used.
12" x .27" Air Feeds #WAF5, feed/straightener combo, 36" stroke,adj height cabinet, #14213T
Timco Inc | Columbia, TN
Category: Feeding and Straightening Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Air Feeds
Model: WAF5
AIR FEED 12" X.270" AIR FEED/STRAIGHTENER COMBO, STOCK# 14213T, MAX WIDTH 12", MAX STROKE 36", CAPACITY 12" X.270", ADJ HEIGHT CABINET, POWER ENTRY PINCH ROLLS, 5 ROLL STRAIGHTENER.
12" x 1/2" Jaybird #WF-J35-56, air feeder 2 plane straightener, 6" bore feeder, 1997
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Jaybird
Model: WF-J35-56
Year: 1997
MODEL: WF-J35-56, S/N: 3760, 12" MAXIMUM STROKE,.125-.5" MAXIMUM THICKNESS WIRE(NOTE FACTORY SAID IT MAY DO 5/8" DIA.), TWO PLANE STRAIGHTENER, 6" BORE FEEDER, ADJUSTABLE HEIGHT CABINET, PENDANT FOR JOGGING, PILOT RELEASE, YEAR: 1997.
12" x .93" Dynamic Feeds #DX1212, Servo slide feed & pull thru straightener, 1996, S46269
Perfection Global | Elk Grove Village, IL
Category: Feeding and Straightening Machines
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Dynamic
Model: DX1212
Year: 1996
Max. Material Width: 12"Min. Material Width: 0.5"Max. Feed Length: 12"Min. Feed Length:.001"Max. Thickness at Full Width:.093"Max. Cross Section of Material: 1.18"Speed (Max. Feed at 2" Progression): 125 SPM, Pull Thru Straightener.
12" Coe Press Equipment #CPRF-S212 Servo Master Series 2, Motorized Servo Feed w/ Pull Thru Straightener, STK# 1650
Stamptech Inc | Southington, CT
Category: Feeding and Straightening Machines
Seller: Stamptech Inc
Location: Southington, CT
Mfr: Coe Press Equipment
Model: CPRF-S212 SERVO MASTER SERIES 2
COE 12" Wide Motorized Servo Feed w/ Pull Thru Straightener, Model CPRF-S212 Servo Master Series 2,.156 Max thickness,.010 Minimum thickness, STK# 1650.
12" Straightener feeder, #59612
Yoder Machinery Sales | Holland, OH
Category: Feeding and Straightening Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
CAPACITY. 12".
15.7" x .177" Orii servo feed line, 6600 lb., 944 IPM L to R, 7-roll type, 59" OD, 16"-20" ID, #13843T
Timco Inc | Columbia, TN
Category: Feeding and Straightening Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Orii
ORII 15.7" X.177" X 6,600LB SERVO FEEDLINE, STOCK# 13843T, FEED CAPACITIES 15.7" WIDE X.177", LINE SPEED 944 IPM LEFT-RIGHT, FEED LINE SEIGHT 55.3", ELECTRICS 220 VOLT, 10.5 AC SERVO MOTOR, STRAIGHTENER ROLL SIZE 15.7 (7 ROLL TYPE), COIL REEL CAP 6600 LB, MAX COIL OD 59" OD, COIL ID RANGE 16"-20", COIL HOLD DOWN.
18" x .09" Dallas #D200, air feeder straightener, 24" stroke, s/n 15274
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Dallas
Model: D200
MODEL: D200, SERIAL #: 15274, 18" MAXIMUM WIDTH CAPACITY, 24" MAXIMUM STROKE,.020-.090 THICKNESS CAPACITY, GOOD CONDITION.
18" x .125" Nidec-CHS Automation #MXS-318PL, Servo Roll Feed Straightener Combination Press Feed, 999.99" max. feed length, 60-80 psi, (5) 2.25" diameter rolls, 2016
S & G Press & Machinery Sales | Shelby Township, MI
Category: Feeding and Straightening Machines
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Chs Automation
Model: MXS-318PL
Year: 2016
Coil Width 18 inches, Coil Thickness.125 inches, NIDEC-CHS Servo Roll Feed Straightener Combination Press Feed :, Stock width capacity: 18", Stock thickness capacity:.125" x 18" Wide, Stock thickness capacity:.150" x 12" Wide, Minimum Stock Thickness. 0.020", Maximum Feed Length. 999.99 inches, Material Feed Accuracy ...more
18" x .14" Jaybird #J91812, air feeder 5-roll straightener, 12" stroke, entry pinch rolls
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Jaybird
Model: J91812
MODEL: J91812, SERIAL #: 1355, 14" WIDE, 12" STROKE,.020-.140 CAPACITY, 5 ROLL STRAIGHTNER, ENTRY PINCH ROLLS, ADJUSTABLE HEIGHT CABINET, GOOD CONDITION.
18" x .2" Coe Press Equipment #C400-1836, Air Feed Straightener Combination Press Feed, 4" bore, 36" stroke
Nidec Press & Automation | Macomb, MI
Category: Feeding and Straightening Machines
Seller: Nidec Press & Automation
Location: Macomb, MI
Mfr: Coe Press Equipment
Model: C400-1836
Bore 4 inches, Stock Width Capacity 18 inches, Max Stock Thickness Capacity At Full Width.200 inches, Stroke 36 inches, Coe Press Air Feed Straightener Combination Press Feed :, Stock width capacity: 18", Stock thickness capacity:.200" x 18" Wide, Stock thickness capacity:.250" x 12" Wide, Stroke (feed) length ...more
18" x 3/8" Orii, motorized straightener, 1996
TNT Industrial | Orange, CA
Category: Feeding and Straightening Machines
Seller: TNT Industrial
Location: Orange, CA
Mfr: Orii
Year: 1996
Find many great new & used options and get the best deals for 1996 ORII 18 INCH WIDE BY 3/8 INCH THICKNESS CAPACITY MOTORIZED STRAIGHTENER. Free shipping for many products!.
18" x 0.281" Dallas # D500-18x18RH, air feed / pull thru straightener, 5-roll straightener, adj height
Rygate, LLC | Clarkston, MI
Category: Feeding and Straightening Machines
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Dallas
Model: D500-18X18RH
DALLAS D500-18x18RH, Stock Width Capacity. 18", Max Stock Thickness Capacity at Full Width. 0.281", Cabinet Mounted Based, Adjustable Height, 5 Roll Straightener, Controls.
18" Durant Tool Company #SS-18, Stock Straightener, (2) drive rolls, (9) straightening rolls, 2" diameter rolls. .20"-.094" thickness
Genemco | Hearne, TX
Category: Feeding and Straightening Machines
Seller: Genemco
Location: Hearne, TX
Mfr: Durant
Model: SS-18
Durant Tool Company Stock Straightener. Model SS-18. Serial 1971. Width is 18 in. (2) drive rolls, (9) straightening rolls. 2 in. dia rolls. Thickness range is.20-.094 in. The SS series is a un-motorized stock straightener. These units are ideal machines for either manually straightening materials with a hand crank or ...more
20" x .105" Rowe #PM-FDC-053-220, coil feeder, control station, 5 HP, #71072
Yoder Machinery Sales | Holland, OH
Category: Feeding and Straightening Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rowe
Model: PM-FDC-053-220
Year: 1991
SERIAL. 26335, MODEL. PM-FDC-053-220, CAPACITY. 20" WIDE X.105" THICK, SPEED. 0 TO 300 FPM, CONTROL STATION. YES, MOTOR. 5 HP.
20" PA Industries #1675/D, straightener, 7 rolls, 2" roll diameter, 2 HP, entry pinch rolls, 1991, #75686
Yoder Machinery Sales | Holland, OH
Category: Feeding and Straightening Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pa Industries
Model: 1675/D
Year: 1991
SERIAL. 253573, MODEL. 1675/D, YEAR NEW. 1991, LENGTH OF ROLLS. 20", DIEAMTER OF ROLLS. 2", CAPACITY. /020 TO.090, NUMBER OF ROLLS. (7) 3 OVER 4, ENTRY PINCH ROLLS. YES, EXIT ROLLS. YES, MOTOR HORSEPOWER. 2.
24" x .049" Coe Press Equipment #CF-500, feeder straightener, R-L, 3" roll diameter, 3 over 4 work rolls
Universal Tube & Rollform | Perrysburg, OH
Category: Feeding and Straightening Machines
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Coe Press Equipment
Model: CF-500
PRICE: $5,500, UTUBE NUMBER: 3010, MANUFACTURER: COE, MODEL NUMBER: CF-500, SERIAL NUMBER: 4915-1, Line Direction: Right to Left, Roll Diameter: 3″ (76.2 mm), Work Rolls: 3 Over 4, Strip Width: 24″ (609 mm), Strip Thickness:.049″ (18 GA.), OVERALL DIMENSIONS: 8′ x 5′ x 5′ ...more
24" x .067" CWP #24B, straightener, 12-roll, 2" dia. x 24" straight rolls, reconditioned, under power, 1998
Alma Machinery Co-Columbia TN | Columbia, TN
Category: Feeding and Straightening Machines
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Cwp
Model: 24B
Year: 1998
24" WIDE X.067" 12 ROLL COOPER WEYMOUTH STRAIGHTENER, RECONDITIONED & UNDER POWER, MODEL 24B, CAPACITY 24" W x.018" -.067" TH, NUMBER OF ROLLS 6 OVER 6, STRAIGHTENING ROLLS 2" DIA x 24" W, POWERED ENTRY ROLLS 2, CENTER DISTANCES 2.5", PINCH ROLL DIAMETER 2", PASS LINE HEIGHT 56", SPEED --, ELECTRICS 220V-3-60 ...more
24" x .09" Coe Press Equipment #CF325, air feeder straightener, 36" stroke, 5-roll straightener, #14041J
Timco Inc | Columbia, TN
Category: Feeding and Straightening Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Coe Press Equipment
Model: CF325
MODEL #: CF-325, SERIAL #: F081568, 24" MAXIMUM STRIP WIDTH, 36" MAXIMUM STROKE,.020" -.090" THICKNESS CAPACITY, 5 ROLL STRAIGHTENER, ENTRY PINCH ROLLS, ADJUSTABLE HEIGHT CABINET, CASCADE ROLLS, 72" LR x 48" FB x 60" TALL, 2500 LBS ESTIMATED WEIGHT, GOOD CONDITION.
24" x .09" Feed-Lease, feeder 5-roll straightener, 12" stroke, pilot release
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Feed-Lease
24" MAXIMUM WIDTH CAPACITY, 12" MAXIMUM STROKE LENGTH,.020-.090 THICKNESS CAPACITY, 5 ROLL STRAIGHTENER, ADJUSTABLE HEIGHT CABINET, PILOT RELEASE.
24" x .187" Coe Press Equipment #CF4002424, feeder 5-roll straightener, 24" stroke, cascade rolls
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Coe Press Equipment
Model: CF4002424
MODEL: CF4002424, SERIAL #: 19410-1, 24" MAXIMUM WIDTH CAPACITY, 24" MAXIMUM STROKE, 5 ROLL STRAIGHTENER, ADJUSTABLE HEIGHT CABINET, CASCADE ROLLS, PILOT RELEASE,.020" -.187" THICKNESS CAPACITY, GOOD CONDITION.
24" x .187" Coil-Matic #XCFA-2424-RH, feeder 5-roll straightener, 24" stroke,pilot release
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Coil-Matic
Model: XCFA-2424-RH
MODEL: XCFA-2424-RH, SERIAL #: 75-5230-213, 24" WIDE MAXIMUM CAPACITY, 24" MAXIMUM STROKE,.020-.187 THICKNESS CAPACITY, 5 ROLL STRAIGHTENER, POWERED ENTRY & EXIT PINCH ROLLS, ADJUSTABLE HEIGHT CABINET, PILOT RELEASE.
24" x .25" Coe Press Equipment #CF-500, air feeder & straightener, 7-roll pull through straightener, motorized pinch rolls, cabinet mounted
Rygate, LLC | Clarkston, MI
Category: Feeding and Straightening Machines
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Coe Press Equipment
Model: CF-500
Coe Press Equipment Model CF 500, 24" Maximum Coil Width, 24" Feed Stroke, Capacity: 24 x 24, Shipping Dimensions: 117" Long x 63" wide x 74".
24" x .25" Feed-Lease, air feeder, 5-roll straightener, 18" stroke, 5" bore cylinder
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Feed-Lease
MODEL #: FL5 24 - 18, SERIAL #: 1880, 24" MAXIMUM WIDTH, 18" MAXIMUM STROKE,.020" x.250" THICKNESS CAPACITY, 5 ROLL STRAIGHTENER, ENTRY PINCH ROLLS, AIR SURGE TANK, ADJUSTABLE HEIGHT CABINET, PILOT RELEASE, 5" BORE CYLINDER, 110 V, 76" LR x 60" FB x 63" TALL, 2500 LBS ESTIMATED WEIGHT, GOOD CONDITION.
24" x .25" Perfecto #38-26-9, powered straightener, #10927
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Feeding and Straightening Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Perfecto
Model: 38-26-9
1978 Perfecto Model 38-26-9 used straightener in working condition. Handles max 24 width and up to 0.25 thickness. Featuring 9 roll straightening, peeler, and loop control arm. Sold as is., Material Width: 24 Maximum., Material Thickness:.034 -.250 @ 24 Wide - 50,000 Yield, (9) Roll Straightener - 3.8 Diameter Rolls ...more
24" x 24" Clarke's #CFV24X971029, feeder, Toshiba 5 HP motor @ 1800 RPM, Falk 4207J25
Garland Bros Inc | Suwanee, GA
Category: Feeding and Straightening Machines
Seller: Garland Bros Inc
Location: Suwanee, GA
Mfr: Clarkes
Model: CFV24X971029
PLEASE REVIEW: We would ask that potential buyers please view the photographs carefully, and understand what you are buying. All questions should be submitted prior to your purchase. *Your purchase includes a 30 day warranty, so you can buy with confidence.* We cannot negotiate price or terms after the sale. Payment ...more
24" x 36" Feed-Lease #FL-3-1/4-24-36, stock feeder & straightener, power feed rolls, #61069
Yoder Machinery Sales | Holland, OH
Category: Feeding and Straightening Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Feed-Lease
Model: FL-3-1/4-24-36
SERIAL. 3988, MODEL. FL-3-1/4-24-36, MAXIMUM STOCK WIDTH. 24", MAXIMUM LENGTH OF STROKE. 36", POWER FEED ROLLS. YES.
24" Cooper Weymouth roll feeder straightener, 3-1/2" feed roll diameter, 3 HP, #74135
Yoder Machinery Sales | Holland, OH
Category: Feeding and Straightening Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cooper Weymouth
SERIAL. RTF24106, MATERIAL WIDTH. 24", FEED ROLL DIAMETER. 3-1/2", PINCH ROLLS. ENTRY & EXIT, CONTROL. A/B PANEL VIEW 1000, HORSEPOWER. 3.
30" x .020-.090" Air Feeds #AF3, feeder/straightener, 18" stroke, 5-roll straightener, entry pinch rolls, s/n #820612
Timco Inc | Columbia, TN
Category: Feeding and Straightening Machines
Seller: Timco Inc
Location: Columbia, TN
Mfr: Air Feeds
Model: AF3
AIR FEEDS 30" X 18" X.090 FEEDER/STRAIGHTENER, STOCK# 13993J, Model: AF3, S/N: 820612, 30" Wide, 18" Stroke,.020-.090 Thickness, 5 Roll Straightener, Entry Pinch Rolls, Condition: Good, Dims: 60" LR x 55" FB x 60" Tall, Weight: 1750#.
30" x .06" Jaybird #J9660, air feeder 5-roll straightener, 60" stroke, recond.'08
D & D Industries Inc | Monclova, OH
Category: Feeding and Straightening Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Jaybird
Model: J9660
MODEL: J9660, SERIAL #: 3621, 30" MAXIMUM WIDTH, 60" MAXIMUM STROKE, 5 ROLL STRAIGHTENER, POWER ENTRY PINCH ROLLS, ADJUSTABLE HEIGHT CABINET, PENDANT CONTROL FOR JOGGING, 120 VOLT, 180"LR x 72" FB x 72" TALL, 5,000# ESTIMATED WEIGHT, RECONDITIONED BY JAYBIRD IN 2008, SINGLE GRIP.
