1 - 50 of 87 listings
Featured
60 Ton, Samco, hydraulic die cutting press, 2-post, 6 stroke, 44" x34" sliding table, #28899
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Samco
Year: 1993
60 Ton Samco, 2 Post Beam Press, 44" x 34" sliding table, #28899, Overview, USED 60 TON SAMCO HYDRAULIC DIE CUTTING PRESS, 2 post downstroke type; floor standing, Ideal for cutting paper, cardboard, leather, rubber, plastics or, textiles, Beam (cutting area): 44" L-R x 22" F-B, Sliding table: 44" L-R x 34" ...more
8 Ton, APMC #APM-SA8, hydraulic clicker press, 15.7" x31.5" bed, quick height adjustment, dual joystick, stroke setting timer, #SMAPMSA8
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA8
Tonnage 8 Ton Beam Size 12.6" Head Surface 12.6" Day Light Opening 4.7" Motor 220 Volt, 1PH (3 Phase is available at no additional charge) Amperage 6.7 Amps s Made In China.
9 Ton, Indusco #G008XL, 2 stroke, 5.1" DL, 27.6" RL X 13.8" FB table, like new, 2004
Alma Machinery Co-Columbia TN | Columbia, TN
Category: Die Cutting Press Machines
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Indusco
Model: G008XL
Year: 2004
CUTTING FORCE 9 US TONS Location This used press is located in our Columbia, TN Warehouse.
15 Ton, USM, clicker press, #29429
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Usm
15 Ton USM Model B, 40" x 20" table, 18" x 20" beam, #29429, Overview, USED 15 TON USM MODEL B HYDRAULIC CLICKER PRESS, Model B, Work surface (table area): 40" L-R x 20" F-B, Beam size: 18" L-R x 20" F-B, Working stroke of beam: 2-5/8" maximum, Daylight opening: 6-1/8" maximum, Floor to top of ...more
18 Ton, Herman Schwabe #DF, hydraulic clicker press, 3 stroke, 6.125" DL, 48" x21" table, 3 HP, #28797
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Herman Schwabe
Model: DF
18 Ton Schwabe DF, 48" x 21" table, 18" x 22" beam, #28797, Overview, USED 18 TON SCHWABE MODEL DF CLICKER PRESS, Hydraulic, Work surface (table area): 48" L-R x 21" F-B, Beam size: 18" L-R x 22" F-B, Working stroke of beam: 3" maximum, Daylight opening: 6.125" maximum, Floor to top of table: 36" ...more
JUST ADDED!
20 Ton, Atom #SE-20C, clicker press
TNT Industrial | Orange, CA
Category: Die Cutting Press Machines
Seller: TNT Industrial
Location: Orange, CA
Mfr: Atom
Model: SE-20C
20 TON ATOM CLICKER PRESS SE 20C~.
Get email updates for newly added Die Cutting Press Machines
Die Cutting Press Machines (also known as die presses) are machines used to cut, shape, or emboss materials like paper, rubber, or metal using a die and applied pressure. Commonly used in industries like packaging, automotive, and textiles, they are ideal for producing precise shapes or patterns in materials. Die cutting press machines are essential for high-speed, accurate production of parts and products with complex shapes.
20 Ton, J. Sandt #415, hydraulic double clicker press, 18" x 29" planten head, #A6531
Sterling Machinery Exchange | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: J. Sandt
Model: 415
Platen heads 18" x 29" Table 30" x 60" Dimensions ( L x D x H ) 70" X 36" X 65".
20 Ton, Sandt #410, clicker press, 2 -3/8" stroke, 7" daylight, 12" x53" tbl., 2 HP
D & D Industries Inc | Monclova, OH
Category: Die Cutting Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Sandt
Model: 410
53" lr x 40" fb x 61" tall 220V 3ph USED 20 TON SANDT CLICKER PRESS Hydraulic Model 410 Work surface (table area): 12" x 53" platen Beam size: 22" L-R x 22" F-B Working stroke of beam: 2-3/8" maximum Daylight opening: 7" maximum Floor to top of table: 37" Power unit: Hydraulic pump, driven by 2 HP motor Weight approx. ...more
22 Ton, Apmc #APM-SA22, 3.54 stroke, hydraulic clicker press, quick height adj., dual joystick Control, New, #SMAPMSA22
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA22
Tonnage 22 Tons Beam Size 14.6" Cutting Pad 1" Maximum Stroke 3.54" Maximum Open Daylight 5" Voltage 220V ~ 3 Phase Dimensions (W x L x H) 40" x 40" x 60".
JUST ADDED!
22 Ton, APMC #APM-SA22, clicker press, 3.54 stroke, 5" daylight, 240 V., 3-phase, polypropylene cutting pad
Sterling Machinery Exchange | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA22
Cutting Pad 1" Maximum Stroke 3.54" Maximum Open Daylight 5" Voltage 240v, 3 Phase Dimension (W x D x H) 40" x 40" x 60" s Polypropylene Cutting Pad.
22 Ton, Atom /Hudson #G888, 16" x 16" traveling head, 58" x16" table, 7.5" DL, #1878
Icon Industries, Inc | Grand Rapids, MI
Category: Die Cutting Press Machines
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Atom
Model: G888
MODEL G888; 20T-HS. TABLE SIZE IS APPROX 58" X 16"; OVERALL CLEARANCE L TO R IS 69". THE CUTTING HEAD/PLATEN IS 16" X 16". THE MAX DAYLIGHT IS APPROX 7.5" AND THE APPROXIMATE MIN DAYLIGHT (SHUT-HEIGHT) IS APPROX 3". NOTE: DAYLIGHT DIMENSIONS WILL BE REDUCED BASED ON THE THICKNESS OF THE ...more
25 Ton, Associated Pacific #FH2050-25, die cutting press, 3.9 stroke, 5.9" DL, manual slide table
Global Equipment International | Chalfont, PA
Category: Die Cutting Press Machines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Associated Pacific
Model: FH2050-25
Machine Bed: 19.7″D x 49.2″ W (500 x 1250 mm)Effective Cutting Area: 17.7″D x 47.2″ W (450 x 1200 mm)Cutting Stroke: 3.9″ (100 mm)Max Daylight: 5.9″ (150 mm)Manual Slide Table, Manufacturer ASSOCIATED PACIFIC Model FH2050-25 Condition Used Serial Number 535324 Stock Number 904528PF.
25 Ton, Atom #SE25L, s.p.a die cutting clicker press, 19.75" x39.25" bed, 19.69" x24.02" upper arm, hydraulic 1.2 HP
Century Machinery Co | Los Angeles, CA
Category: Die Cutting Press Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Atom
Model: SE25L
1 – used ATOM S.P.A. C-FRAME DIE CUTTING PRESS, Model SE25L – T25 (Clicker), Serial Number 25A170135, CAPACITY CUTTING FORCE: TONS…………………… 25 (245 kN), STROKE OF CYLINDER ...more
25 Ton, Herman Schwabe #D, clicker press, 3 stroke, 40" x20" table, 18" x20" beam, 6.75" DL, #28601
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Herman Schwabe
Model: D
25 Ton Schwabe Model D, 40" x 20" table, 18" x 20" beam, #28601, Overview, USED 25 TON SCHWABE MODEL D CLICKER PRESS, Hydraulic, Work surface (table area): 40" L-R x 20" F-B, Beam size: 18" L-R x 20" F-B, Working stroke of beam: 3" maximum, Daylight opening: 6.75" maximum, Floor to top of table: ...more
25 Ton, Herman Schwabe #D, hydraulic clicker press, 3 stroke, 40" x20" table, 24" x20" beam, #28956
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Herman Schwabe
Model: D
25 Ton Schwabe Model D, 40" x 20" table, 24" x 20" beam, #28956, Overview, USED 25 TON SCHWABE MODEL D CLICKER PRESS, Hydraulic, Work surface (table area): 40" L-R x 20" F-B, Beam size: 24" L-R x 20" F-B, Working stroke of beam: 3" maximum, Daylight opening: 6.75" maximum, Floor to top of table: ...more
25 Ton, Herman Schwabe #DS, 3 stroke, 6.75" DL, 40" x 30" work surface, 36" x 24" beam, #28485
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Herman Schwabe
Model: DS
25 Ton Schwabe Model DS, 40" x 30" Work Surface, 36" x 24" Beam, #28485, Overview, USED 25 TON SCHWABE MODEL DS CLICKER PRESS, Hydraulic, With arm braces, Work surface (table area): 40" L-R x 30" F-B, Beam size: 36" L-R x 24" F-B, Working stroke of beam: 3" maximum, Daylight opening: 6.75" maximum ...more
25 Ton, Herman Schwabe #DSHD, hydraulic clicker press, 3 stroke, 40" x30" table, 36" x30" beam, #28951
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Herman Schwabe
Model: DSHD
25 Ton Schwabe Model DSHD, 40" x 30" table, 36" x 30" beam, #28951, Overview, USED 25 TON SCHWABE MODEL DSHD CLICKER PRESS, Hydraulic, With arm braces, Work surface (table area): 40" L-R x 30" F-B, Beam size: 36" L-R x 30" F-B, Working stroke of beam: 3" maximum, Daylight opening: 6.75" maximum ...more
25 Ton, Herman Schwabe #DV, hydraulic clicker press, 3 stroke, 30" x30" table, 30" x24" beam, #29340
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Herman Schwabe
Model: DV
25 Ton Schwabe Model DV, 30" x 30" table, 30" x 24" beam, #29340, Overview, USED 25 TON SCHWABE MODEL DV HYDRAULIC CLICKER PRESS, With arm braces, Work surface (table area): 30" L-R x 30" F-B, Beam size: 30" L-R x 24" F-B, Working stroke of beam: 3" maximum, Daylight opening: 6.75" maximum, Floor ...more
25 Ton, Hudson #F63HS, travelling head, 68x25" bed, 20x20" head, adj.stroke to 5.75", #2616
Icon Industries, Inc | Grand Rapids, MI
Category: Die Cutting Press Machines
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Hudson
Model: F63HS
MODEL F-63-HS. SERIAL #700012379. BED IS APPROX 68" X 25". MOVING SLIDE IS APPROX 20" X 20". STROKE: APPROX 0"-5.75". DAYLIGHT MAX APPROX 7.75". OPERATOR HEIGHT APPROX 41.25". 220/440V (SET UP FOR 220V). 30 AMP DISCONNECT. OVERALL DIMENSIONS APPROX 88" X 36" X 85" TALL. ...more
25 Ton, Schwabe #D, 1/4"-3" stroke, 13" x 24" swing arm, 20" x 40" table, 3 HP, s/n #26694, #155690
Machinery Values Inc | Harrison, NJ
Category: Die Cutting Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Schwabe
Model: D
25 TON HERMAN SCHWABE CLICKER PRESSMODEL D… S/N 26694 RATED CAPACITY. 25 TONSSTROKE.(ADJUSTABLE). 1/4" -″"SWING ARM. 13" X 24"TABLE. 20" X 40"MOTOR.″ HP MOTOR, 208/220/440 VOLT S:- 2 HAND OPERATION- AUTOMATIC SPRING RETRUN FOR FASTER OPERATION DIMENSIONS: 48" X ...more
25 Ton, Herman Schwabe #DS, 40" x 30" work surface, 36" x 24" beam size, 3 stroke, 6.75" DL, #16673C
Vander Ziel Machinery Sales | Alto, MI
Category: Die Cutting Press Machines
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Schwabe
Model: DS
25 Ton Schwabe Model DS, 40” x 30” Work Surface, 36” x 24”, Asset #16673, Serial # 22957, Hydraulic With arm braces Work surface (table area): 40" L-R x 30" F-B Beam size: 36" L-R x 24" F-B Working stroke of beam: 3" maximum Daylight opening: 6.75" maximum Floor to top of table: 37" Power unit: ...more
25 Ton, Schwabe #DS, clicker die cutting press, 3 stroke, 24" X 40" swing arm, 30" x 40" table, 3 HP, 220 V.
Machinery Values Inc | Harrison, NJ
Category: Die Cutting Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Schwabe
Model: DS
25 TON HERMAN SCHWABE CLICKER PRESSMODEL DS… S/N 27516 RATED CAPACITY. 25 TONSSTROKE.(ADJUSTABLE). 1/4" -″"SWING ARM. 24" X 40"TABLE.″0" X 40" :- LARGER BED- ANTI TIE DOWN PALM BUTTONS-″ HP MOTOR, 220 VOLT.
25 Ton, Schwabe #G, downacting die cutting press, 100" x34" bed, 6 stroke, 5 HP
Inter-Plant Sales | Hugo, MN
Category: Die Cutting Press Machines
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Schwabe
Model: G
Herman Schwabe 25 Ton Down Acting Die Cutting Press, Model G, S# 60161, 25 Ton capacity, 100" x 34" Bed, Ram size 34" x 28", 6" stroke on ram, Adjustable bed height 6" approx. and is powered, Head left and right is powered, 5hp 220/440v 3ph wired 220 volt.
25 Ton, Herman Schwabe, hydraulic clicker press, 3 stroke, 6.75" DL, 36" x18" table, 18" x20" beam, #29164
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Schwabe
25 Ton Schwabe, 36" x 18" table, 18" x 20" beam, #29164, Overview, USED 25 TON SCHWABE HYDRAULIC CLICKER PRESS, Work surface (table area): 36" L-R x 18" F-B, Beam size: 18" L-R x 20" F-B, Working stroke of beam: 3" maximum, Daylight opening: 6.75" maximum, Floor to top of table: 35", Serial no. ...more
27 Ton, APMC #APM-SA27, hydraulic clicker press, 3.54" sw, 5.1" open, 2 HP, 20" x40" bed, urethane board, dual joystick
Sterling Machinery Exchange | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA27
Tonnage 27 Ton Ram Area 20" x 24" Cutting Pad 1" Max. Stroke 3.54" Max. Open Daylight 5.1" Beam Size 20" s Urethane Board Manual Height Adjustment.
27 Ton, Apmc #APM-SA27L, 3.54 stroke, hydraulic clicker press, quick height adj., dual joystick Control, New, #SMAPMSA27L
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: APM-SA27L
Tonnage 27 Ton Bed Area 20" x 40" Cutting Pad 1" Max. Stroke 3.54" Beam Size 24" Max. Open Daylight 5.1" Head Surface 20" Ram Area 24" Motor 220 Volt, 3 PH (Single Phase is Available For An Additional $950).
JUST ADDED!
27 Ton, APMC #SY-627L, clicker press, 3.5 stroke, 5.1" DL, 20" x40" bed, 24" beam, urethane board, 2008
Sterling Machinery Exchange | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Apmc
Model: SY-627L
Year: 2008
Maximum cutting force 27 Tons Stroke 3.5" Bed Area 20" x 40" Maximum Daylight 5.1" Beam Size 24" Weight (Lbs.) 2,500 Lbs. s Urethane Board.
30 Ton, APMC #FH2663-30M, hydraulic clicker press, single manual slide table, polypropylene cutting pad
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: FH2663-30M
Tonnage 30 T Length 25 in Width 63 in.
30 Ton, Hudson #NF-500CL, precision sheet hydraulic die cutting press
TNT Industrial | Orange, CA
Category: Die Cutting Press Machines
Seller: TNT Industrial
Location: Orange, CA
Mfr: Hudson
Model: NF-500CL
HUDSON MACHINERY MODEL NF-500CL PRECISION SHEET HYDRAULIC DIE CUTTING PRESS 30 TON.
30 Ton, USM Series GTH #2065, hydraulic travel head die cutting press, 6 stroke, 4 HP, #29120
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Usm
Model: 2065
30 Ton USM Series GTH, 79" x 26" table, 30" x 26" cutting head, #29120, Overview, USED 30 TON USM SERIES GTH HYDRAULIC TRAVEL HEAD DIE CUTTING PRESS, Series GTH, Model 2065, Floor standing, Distance between side housings: 79.5" L-R, Table area: 79" L-R x 26" F-B, Cutting head area: 30" L-R x 26" ...more
30 Ton, USM #DVKS, travel head, 25" x 21" cutting head, 95" x 20" table area, #26857
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Usm
Model: DVKS
30 Ton USM #DVKS, 95" x 20" table, 25.5" x 21.5" cutting head, #26857, Overview, USED APPROX. 30 TON USM TRAVEL HEAD DIE CUTTING PRESS, Hydraulic, Model DVKS, Floor standing, Distance between side housings: 95" L-R, Table area: 95" L-R x 20" F-B, Cutting head area: 25.5" L-R x 21.5" F-B, Stroke: ...more
35 Ton, Samco #TH-35, die clicker press, 230 V., 3 KVA
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Die Cutting Press Machines
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Samco
Model: TH-35
Samco TH- 35 Ton, Model: TH-35, S/N: 91.2406, Voltage: 230, Cycles: 60, KVA: 3, Total Weight: 2160 Kg.
39 Ton, APMC #USA-TH3079-35U, 5.9 stroke, 7.1" daylight, head press, polypropylene cutting pad, #SMTH307935U
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: USA-TH3079-35U
Cutting Head 29.9" x 29.9" Stroke 5.9" Tonnage 39 Max. Daylight 7.1" Dimensions (W x L x H) 36" x 106" x 95" Horsepower: 5 Motor 220 Volt 3 PH s Polypropylene Cutting Pad Rear Safety Guards And Simple Table.
JUST ADDED!
40 Ton, APMC #ABC-40, clicker press, 7.1 stroke, 9.1" daylight, 31.5" X63" bed, single manual slide table
Sterling Machinery Exchange | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Apmc
Model: ABC-40
Bed Size (W x L) 31.5" x 63" Cutting Area 29.5" x 61" Stroke 7.1" Max. Daylight 9.1" Dimensions (W x L x H) 89" x 89" x 62" s Polypropylene Cutting Pad Single Manual Slide Table.
40 Ton, APMC #USA-FH3163-40M, 7.1 stroke, 9.1" daylight, hydraulic clicker press, #SMFH316340M
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Apmc
Model: USA-FH3163-40M
Tonnage 40 Bed Size (W x L) 31.5" x 63" Cutting Area 29.5" x 61" Stroke 7.1" Max. Daylight 9.1" Motor 220 Volt, 3 PH Dimensions (W x L x H) 89" x 89" x 62" s Polypropylene Cutting Pad Single Manual Slide Table.
40 Ton, Associated Pacific #ABC-40, hydraulic die cutting press, 4-post, 7 stroke, 2001, #28823
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Associated Pacific
Model: ABC-40
Year: 2001
40 Ton Associated Pacific ABC-40, 4-Post with Dual Shuttle Table, 47" x 30" Cutting Area, New 2001, #28823, Overview, USED 40 TON ASSOCIATED PACIFIC HYDRAULIC DIE CUTTER, Mfd. 2001, With dual shuttle tables, Model ABC-40; 4 post downstroke type; floor standing, Beam (cutting area): 47" L-R x 30" F-B, Beam: ...more
40 Ton, Preco #1220-40T, 4-post hydraulic die cutting press, 4 stroke, 10" DL, (4) pneumatic clamps, 2021
Machnet | Santa Monica, CA
Category: Die Cutting Press Machines
Seller: Machnet
Location: Santa Monica, CA
Mfr: Preco
Model: 1220-40T
Year: 2021
2021 Preco 1220-40T, 40T Die Cutting 4-Post Hydraulic Press; Micrometer adjustment, 12" x 20", 10" Daylight, 10" Feed, 10HP, Preco Model 1220-40T Hydraulic Die Cutting Press, New: 2021, Capacity: 40 Tons, Platen Area: 12" D x 20" W, Daylight: 10" (Includes 2" Bolster), Roll Feed Diameter: 2.25", Max Feed Length: 10" ...more
40 Ton, Preco #1220-40T, hydraulic die cutting press, 4 stroke, 10" DL, 20" x12" platen area, 2021
Perfection Global | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Preco
Model: 1220-40T
Year: 2021
Capacity: 40 TonPlaten Area: 20" x 12"Daylight: 10"Bolster Thickness: 2"Stroke: 4"Roll Feed Diameter: 2.25"Max Feed Length: 10"Pump Motor: 10 hp, Pedestal ControlManual, Schematics, and Software.
40 Ton, Herman Schwabe #MFH, mechanical die cutting press, folding head, 3 stroke
Revelation Machinery | Chicago, IL
Category: Die Cutting Press Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Schwabe
Model: MFH
Year: 2015
Make: Herman Schwabe, Model: MFH, Year: 2015, Machine Location: Illinois, Ideal for Cutting Paper, Cardboard, Leather, Rubber, Plastics & Textiles, Distance between housings: 65″ L-R, Bed/Cutting Area: 60″ L-R x 30″ F-B, Beam: 60″ L-R x 30″ F-B, Stroke: 3″ Max, Daylight Folding ...more
40 Ton, Ormont #DW, Die-Cutting Machine, 40" x 60" Table, 11.5" Daylight, 1750 RPM, 230/460 V
MachineCo | Montreal, QC
Category: Die Cutting Press Machines
Seller: MachineCo
Location: Montreal, QC
Model: DW
“ACTUAL PHOTOS ! We just sold the described unit! This 2nd unit is in the southern USA is still in a plant. We are told that it works ok but the owner didn’t need it anymore. The frame is straight and sound and it has normal wear from use. The mentioned in the text must be verified.” ...more
44 Ton, Ormont #DU-44, 4 Stroke Receeding Head Clicker Press, 30" x60" table, 4" stroke, 12" DL
Revelation Machinery | Chicago, IL
Category: Die Cutting Press Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Ormont
Model: DU-44
Year: 1900
Make: Ormont, Model: DU-44, Year: 1900, Machine Location: New Jersey, – Distance Between Side Housings: 63″, – Table Size: 30″ x 60″, – Cutting Head Area: 30″ x 60″, – Stroke: 4″, – Daylight Opening: 12″, – Floor to Top of Bed: 31″ ...more
44 Ton, Ormont #DU-44, 4 stroke, 12" daylight, receding head large bed clicker press, 60" x30" bed, cutting pad, push button, #A5835
Sterling Machinery Exchange | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Ormont
Model: DU-44
Distance Between Side Housings 63" Table Size 30" x 60" Cutting Head Area 30" x 60" Stroke 4" Daylight Opening 12" Floor to top of bed 31" Dimensions (W x D x H) 86" x 47" x 79" Tonnage 40 Ton s Cutting Pad Push Button Controls Note: See additional info on repair issues. Great Rebuild Candidate..
50 Ton, Atom #S358, hydraulic die cutting press, 10.5 stroke, 63" x31" table, 63" x31" cut head, #29138
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Atom
Model: S358
50 Ton Atom #S358, Beam Press, 63" x 31" table, 63" x 31" cutting head, #29138, Overview, USED 50 TON ATOM #S358 HYDRAULIC DIE CUTTING PRESS, Model no. S358, Floor standing, Distance between guides: 65" L-R, Table area: 63" L-R x 31" F-B, Cutting head area: 63" L-R x 31" F-B, Stroke: Approx. ...more
50 Ton, Contech #UP2028, hydraulic flat bed clicker press, 4" stroke, 20" x 28" bed & ram platen, 335°F, automatic shuttle table, 2000, #A6666
Sterling Machinery Exchange | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Contech
Model: UP2028
Year: 2000
Tonnage 7- 50 Stroke 0"- 4" Bed & Ram Platen Size: 20" x 28" Max. Heated Platen Temperature: 335 Degrees F Dimensions (L x W x H) 94" x 76" x 85" Voltage 460 Volt s Full Head Automatic & Manual Shuttle Bed Heated Platen For Thermal Die Cutting Hoffman Touch Screen Control Manual Lift Height Control With ...more
50 Ton, Herman Schwabe #DG-HD, die cutting press, hydraulic, 38" x38" cutting area, 10 HP, #29093
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Herman Schwabe
Model: DG-HD
50 Ton Schwabe DG-HD, 38" x 38" cutting area, Shuttle Table, #29093, Overview, USED 50 TON SCHWABE MODEL DG-HD DIE CUTTING PRESS, Hydraulic, floor standing, Ideal for cutting paper, cardboard, leather, rubber, plastics & textiles, Distance between side frames: 43" L-R, Bed (cutting area): 38" L-R x 38" ...more
50 Ton, Hoffman Bros. / Chen Feng #CF-556, receding head die cutting press, hydraulic, 4 stroke, #29184
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Hoffman
Model: CF-556
50 Ton Hoffman Bros./Chen Feng #CF-556, receding head, 63" x 33"cutting area, #29184, Overview, USED 50 TON HOFFMAN BROTHERS/CHEN FENG RECEDING HEAD DIE CUTTING PRESS, Hydraulic, Model no. CF-556, Floor standing, Distance between side housings: 64" L-R, Table area: 63" L-R x 33" F-B, Cutting head area: 63" ...more
50 Ton, Sandt #F9143, hydraulic die cutting press, 10 stroke, 13" DL, 63" x25" table, #29157
Kempler Industries Inc | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Kempler Industries Inc
Location: Elk Grove Village, IL
Mfr: Sandt
Model: F9143
50 Ton Sandt #F9143, Beam Press, 63" x 25" table, 63" x 24" cutting head, #29157, Overview, 50 TON SANDT HYDRAULIC DIE CUTTING PRESS, Model F9143, Beam Press - Floor standing, Distance between side housings: 65" L-R, Table area: 63" L-R x 25" F-B, Cutting head area: 63" L-R x 24" F-B, Stroke: ...more
60 Ton, Preco #2024-60T, hydraulic die cutting press, 4 stroke, 10" DL, 20" x24" platen, (4) pneumatic clamps, 2021
Machnet | Santa Monica, CA
Category: Die Cutting Press Machines
Seller: Machnet
Location: Santa Monica, CA
Mfr: Preco
Model: 2024-60T
Year: 2021
2021 Preco 2024-60T, 60T Die Cutting 4-Post Hydraulic Press; Micrometer adjustment, 20" x 24", 10" Daylight, 10" Feed, 10HP, Preco Model 2024-60T Hydraulic Die Cutting Press, New: 2021, Capacity: 60 Tons, Platen Area: 20" D x 24" W, Daylight: 10" (Includes 2" Bolster), Roll Feed Diameter: 2.25", Max Feed Length: 10" ...more
60 Ton, Preco #2024-60T, hydraulic die cutting press, 4 stroke, 10" DL, 24" x20" platen area, 2021
Perfection Global | Elk Grove Village, IL
Category: Die Cutting Press Machines
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Preco
Model: 2024-60T
Year: 2021
Capacity: 60 TonPlaten Area: 24" x 20"Daylight: 10"Bolster Thickness: 2"Stroke: 4"Roll Feed Diameter: 2.25"Max Feed Length: 10"Pump Motor: 10 hp, Pedestal ControlUnroll StationManual, Schematics, and Software.
60 Ton, Preco #2024P601, hydraulic, 20" x 24" bed, infeed & exit rolls, Preco infeed reel, like new, 2008
Yeoman Machinery Corp | Elkhart, IN
Category: Die Cutting Press Machines
Seller: Yeoman Machinery Corp
Location: Elkhart, IN
Mfr: Preco
Model: 2024P601
Year: 2008
60 Ton, Questa #AREA-60, hydraulic clicker press, 40" x 65" sliding table press, #A6822
Sterling Machinery Exchange | South El Monte, CA
Category: Die Cutting Press Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Questa
Model: AREA-60
Tonnage 60 Bed Area 40" x 65" s Sliding Table Safety Light Curtains.
