Carolina Machinery Sales
Monroe, NC 28110-8163
Silver Level Dealer
Surplus Record Dealer Since 2021
Contact
Ralph Viegelmann
About
Carolina Machinery Sales is one of the largest woodworking dealers in North America.You can view all our machinery inventory below or call/email us to schedule time to come to our location for a live demonstration, or make arrangements to visit and talk with the owner of one of our used machines. All used equipment is available for inspection and ready for immediate delivery!
We also help with Plant Liquidations, Secure Warehouse Storage (with consignment options) as well as general Consulting for any of your woodworking machinery and equipment questions, whether its a custom project or CAD drawings, we can help.
Products & Services
- Plant Liquidations
- Woodworking Machinery
Associations & Affiliations
1306 listings in 170 categories
3-Dimensional (3-D Printing) Printers
1 Result
Massivit #1800-Pro, 3D printer, prints extra large parts, 57" x44" x70" capacity, high speed, 2019
Category: 3-Dimensional (3-D Printing) Printers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Massivit
Model: 1800-PRO
Year: 2019
For Printing Extra Large Parts, 57" x 44" x 70" capacity, High speed printing with (2) printing heads.
60 Hz Three Phase Transformers
3 Results
45 KVA 480 Primary, 208Y/120 Secondary, Federal Pacific
Category: 60 Hz Three Phase Transformers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Federal Pacific
45 KVA, 480 volt to 208Y/120.
Carolina Machinery Sales has 2 more
listings in 60 Hz Three Phase Transformers.
BPR #Z302 R-PR, Mechanical Pyramid Section Bending Machine
Category: Angle Bending Rolls
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Bpr
Model: Z302
Mechanical Pyramid Section Bending Machine, Model # Z302 R-PR, Voltage # 220/3 50/60.
Premier Tech #EM600, 4-stage Bagging System, w/ Auto Bag Placer, infeed, rebuilt controls 2019
Category: Bagging Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Premier Tech
Model: EM600
Premier Tech EM600 4-Stage Bagging System, Automatic Sealer, Automatic Bag Placer, Infeed Auger, 11x17 Tubes, Rebuilt controls in 2019.
Carolina Machinery Sales has 2 more
listings in Bagging Equipment.
Bagging Equipment for Woodworking
6 Results
Action Pac Automatic Mulch Bagging Line, Seal 480 Bags per hour
Category: Bagging Equipment for Woodworking
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Action Pac
Action Pac Mulch Bagging Line, Per manufacturer: Seal 480 Bags per hour, Can also fill bulk totes, Purchased new in 2021. Never installed into production.
Carolina Machinery Sales has 5 more
listings in Bagging Equipment for Woodworking.
Balancing Machines (Dynamic and Static)
1 Result
33 lb. Haimer #TD2002, moulder head balancing machine, unblance on 1 plane, Vibration optimized base, for short tool holders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Haimer
Model: TD2002
Haimer TD2002.
Bed and Knee Milling Machines - Vertical
3 Results
Jet #JTM-4VS, vertical milling machine, 9" x49" table, 3 HP, 60-4200 RPM
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Jet
Model: JTM-4VS
Jet Turret Milling Machine.
Carolina Machinery Sales has 2 more
listings in Bed and Knee Milling Machines - Vertical.
42" wide x 3.5' long, Belt Conveyor, 2. 31 ft long, 42" wide, 38.5" belt, 1. 52 ft long, 42" wide, 36" belt, 3 Belt Conveyors Available
Category: Belt Conveyors
Seller: Carolina Machinery Sales
Location: Monroe, NC
3 Belt Conveyors Available:, 1. 52 ft long, 42" wide, 36" belt, 2. 31 ft long, 42" wide, 38.5" belt, 3. 51 ft long, 42" wide, 38.5" belt.
Carolina Machinery Sales has 5 more
listings in Belt Conveyors.
15" Grizzly #G9983, Wide Belt Sander, 5 HP, 2050 FPM drum, 16.4 FPM feed, 2004
Category: Belt Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Grizzly
Model: G9983
Year: 2004
Grizzly G 9983 15” Wide Belt Sander.
Carolina Machinery Sales has 8 more
listings in Belt Sanders.
Webb, Sawdust Burner, 13 MM BTU
Category: Biomass Burners
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Webb
Webb 13 MM BTU Sawdust Burner, Ready to dismantle and load.
600 HP Hurst, hybred boiler sys, 300 psi, woodfire furnace box, 12" metering conv sys, 1996
Category: Biomass Steam Boilers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Year: 1996
600 hp 300 psi Hurst Hybrid boiler system. 1996 year model, Equipment Included:, 1- 1- Hurst 1996 Hybrid Boiler, 2- 1- Hurst woodfire furnace box, 3- 1- Hurst 12” metering conveyor system, 4- 1- Overfire air combustion fan, 5- 1- Underfire air combustion fan, 6- 1- Hurst combustion air preheater, 7- 2- Hurst ...more
Miner, 4" Edger
Category: Board / Wood Edgers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Miner
Miner 4” Edger.
Carolina Machinery Sales has 4 more
listings in Board / Wood Edgers.
Baker #BDD-O, Board Deduster, 2022 (2 available)
Category: Board Dedusters
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: BDD-O
Year: 2022
Baker Board Deduster - Two machines available!, Never put into production.
Carolina Machinery Sales has 2 more
listings in Board Dedusters.
Booths, Paint and Powder
3 Results
Coral #EuroDry, Paint Booth
Category: Booths, Paint and Powder
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Coral
Model: EURODRY
Year: 2025
In stock and ready to ship!, Coral EuroDry Paint Booth, - 3500-11771 CFM, - 5'-16' Wide.
Carolina Machinery Sales has 2 more
listings in Booths, Paint and Powder.
Briquetters
4 Results
CF Nielsen #BP6510, Automatic Briquette Press Line, 100 hours, 2021
Category: Briquetters
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cf Nielsen
Year: 2021
CF Nielsen BP6510 HD Automatic Briquette Press, (2) Lines available, Infeed system for both units, Reported to have less than 100 hours of operation.
Carolina Machinery Sales has 3 more
listings in Briquetters.
Bulldozers for Mining
1 Result
John Deere #550J, Bulldozer, tracks, 6087 hours
Category: Bulldozers for Mining
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: John Deere
Model: 550J
John Deere 550J Bulldozer, Good running condition!.
Carbide, Friction and Cold Saws
1 Result
Scotchman #2T5LT Netal Cutting Saw, 12" blade, 2-1/2 HP, 230 v., vise for holding materials
Category: Carbide, Friction and Cold Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scotchman
Model: 2T5LT
Approx. 12” blade, 2-1/2 HP motor, vice for holding materials, 230 volt single phase.
Carton Packaging Machines
1 Result
Triangle Pack Mach #VCL-1500, Cartoner, 1994
Category: Carton Packaging Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Triangle Pack
Model: VCL-1500
Year: 1994
This Triangle Packaging Cartoner is in good working/running condition the seller has confirmed and this is ready to load!, - 5HP, - 64RPM, - Continuous motion, - Carton size range:, - 3" to 13" in length, - 1.5" to 8" in width, - 7.5" to 18.5" in depth, - Nordson Glue system, - Touchscreen interface.
Centrifugal Air Compressors
1 Result
125 psi, Joy #TA-020, Compressor, 20 Hp, 230 V., 10181 hours
Category: Centrifugal Air Compressors
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Joy
Model: TA-020
Joy 20 HP Compressor, Approx 10,000 hours, Just had oil change, new separator element, oil filters, drive belts.
96" wide x 65' long Roof-top chain conveyor, 3 HP, 460 V., 4 chains
Category: Chain Conveyors
Seller: Carolina Machinery Sales
Location: Monroe, NC
96” WIDE x 65′ LONG ROOF-TOP CHAIN DECK, (460/60/3 electrics), - 3 HP motor/gearbox drive assembly, - (4) roof top chains with 24” / 24” / 44” chain centers.
Carolina Machinery Sales has 1 more
listing in Chain Conveyors.
Peerless #14MOD, Chip Bin
Category: Chip Bins
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Peerless
Model: 14MOD
Peerless Chip Bin MOD 14.
Carolina Machinery Sales has 2 more
listings in Chip Bins.
Fulghum, 1-1/4" screen, belt driven
Category: Chip Screens
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Fulghum
Fulghum Screen, 1-1/4" screen size, Belt driven (2 belts), Can be wired 240 or 480V-3 phase power.
Carolina Machinery Sales has 3 more
listings in Chip Screens.
Clamp - Case & Feed Thru
6 Results
Biesse #Cosmo, Case Clamp, 51" x 98" x 27-1/2" max, 13" FPM, 2022
Category: Clamp - Case & Feed Thru
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: COSMO
Year: 2022
Working Height: 11.8" - 51" (300 - 1300 mm); working length: 11.8" - 98" (300 - 2,500 mm); working depth: 5-1/2" - 27-1/2" (140 - 700 mm); 20" (500 mm) working height off floor., Motorized horizontal & vertical beams move simultaneously or individually at 13 FPM (4 MPM)., Clamping, Vertical & horizontal ...more
Carolina Machinery Sales has 5 more
listings in Clamp - Case & Feed Thru.
Clamp Carrier - Manual & Auto
1 Result
Taylor #40-Section, Clamp Carrier, 40-Section
Category: Clamp Carrier - Manual & Auto
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Taylor
Model: 40-SECTION
Taylor 40 section Calmp Carrier.
Taylor #800176, Rotary Clamp, rebuilt, 1998
Category: Clamps
Seller: Carolina Machinery Sales
Location: Monroe, NC
Year: 1998
Taylor Rotary Clamp, Unit was rebuilt by Taylor.
Carolina Machinery Sales has 3 more
listings in Clamps.
Allen-Bradley Laser #Starmark-LME, Laser, 65 watt, 1999, AS IS
Category: CNC Lasers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Allen-Bradley
Model: STARMARK-LME
Year: 1999
Starmark LME Laser Engraver, manufacturer, Laser Type I:, Flash Lamp Pumped, Marking Area:, 9" 254mm diameter, Wavelength(s) (nm):, 1064 nm, Pulse Characteristics I:, CW & Q-Switched, Laser Date of Manufacture:, 1999, Laser Rated Power (watts):, 65, Laser Actual Power (watts):, 65, Laser Cooling:, Water, System ...more
Centauro #T5-1600, Lathe, 3000 RPM, tailstock, 2019
Category: CNC Lathes and Turning Centers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Centauro
Model: T5-1600
Year: 2019
2019 Centauro T5 1600 Lathe, Max. distance between the tips, 1600 mm, Height of tips on the bed, 250 mm, Max. turning and milling diameter, 250 mm, Diameter allowed on the rotating rest, 110 mm, Driver and tailstock attachments, 3 C.M., Spindle rotation speed, [650 - 900 - 1100 - 1300](tel:650 - 900 - 1100 - 1300) - ...more
Carolina Machinery Sales has 3 more
listings in CNC Lathes and Turning Centers.
CNC Plasma Cutting Systems (Flame Cutters)
1 Result
Tianjiao #TJ-P1325, CNC plasma with new transformer, 4' x 8' cut area
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Tianjiao
Model: TJ-P1325
Seller purchased and never used as he didn't have the correct voltage in his shop., *price includes a new transformer, Cutting area: 51.2" x 98.4", High precision guide rail, Gear rack transmission, Torch height controller, FASTCAM nesting software, 3kw air compressor, Watertable.
Pade #Double-Side, CNC Profile Shaper
Category: CNC Profilers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: DOUBLE-SIDE
Made CNC Double Side Shaper.
AXYZ #Panel-Builder-5018, CNC Router, 60" x264" table, 5 HP, 2014, AS IS
Category: CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Axyz
Model: PANEL-BUILDER-5018
Year: 2014
Table Width: 60″, Table Length: 264″, Number of Axis: 3, Number of Spindles: 3, One Spindle Requires Repair, Spindle Motor: Elite 5 HP, Control: Axyz Controller, Hold Down: Vacuum Table, Power Requirement: 240V.
Carolina Machinery Sales has 20 more
listings in CNC Routers.
Cold Milling Machines / Planers
1 Result
Newman #M712, 4-Sided Planer Mill, w/ Infeed Deck, unscrambler, conveyors
Category: Cold Milling Machines / Planers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Newman
Model: M712
Newman M712 4-sided planer, Infeed deck with unscrambler, Infeed conveyor, Outfeed conveyor, Greenchain.
Commercial Printing Presses and Equipment
1 Result
Cefla Sorbini #Smartprint-T/20-3-STP, triple head print & IR line, (3) print head system, (3) print head system
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cefla Sorbini
Model: SMARTPRINT-T/20-3-STP
Cefla Sorbini T/20-3-STP Triple Head Print & UV Line, (3) Print Head System, (2) IR Ovens, Available Immediately.
Compact Track Loaders
1 Result
New Holland #C337, Compact Track Loader, under 1400 hours, 2023
Category: Compact Track Loaders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: New Holland Ltd
Model: NEW HOLLAND
Year: 2023
New Holland C337 Track Loader, Just under 1400 hours.
Complete Manufacturing & Power Plants
1 Result
Complete Woodworking Facility, Hardwood Furniture Frame & Components, w/ Real Estate
Category: Complete Manufacturing & Power Plants
Seller: Carolina Machinery Sales
Location: Monroe, NC
This is an opportunity to expand into the hardwood furniture frame, stock and parts industry. Located in the desirable area of North Carolina's furniture belt, this facility offers a fully operational manufacturing workshop. All machinery is still connected and under power for inspection., This established ...more
Complete Woodworking Plants
7 Results
Fulghum, Complete Chip Mill, cranes, loader, chipper, screens, conveyors, radial stacker 42" x 160", dual rail, truck scale
Category: Complete Woodworking Plants
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Fulghum
Complete Fulghum Chip Mill includes:, - Fulghum 155' 20 ton crane, - Fulghum 125' 20 ton crane, - Fulghum 12x90 drum debarker with infeed and outfeed chutes, - Prentice 210 Knuckleboom loader, - Control house, - Fulghum 112" Horizontal feed, bottom discharge chipper: 10 knife, 1500 HP Motor, - Chipper ...more
Carolina Machinery Sales has 6 more
listings in Complete Woodworking Plants.
Vecoplan #CVR-150-550, Vibrating Conveyor, new 2022
Category: Conveyors Vibratory Feeders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: CVR-150-550
Year: 2022
Brand new never used!!, 16′8” long, 22” wide, 19” height (adjustable).
Countertop and Postform Equipment
1 Result
Midwest Automation #CS-5840, countertop saw, w/ second unit for parts or repair
Category: Countertop and Postform Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: CS-5840
There are two countertop saws in this listing., The first saw was in good working condition when removed from service., The second saw had some parts replaced. It can be used with some TLC, or as a parts machine.
12" Cut Off Saw, 2 head, 12" blades, 20 HP, C55 rooftop, 2 HP feeder
Category: Cutoff Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
2 saw cutoff, 12” blades, 20 HP motor, 4 chain, C55 rooftop, 2 HP heavy gearbox on feedworks, Ready to load.
Carolina Machinery Sales has 5 more
listings in Cutoff Saws.
Cambio #71-75 Ring Debarker, Includes Misc parts and roller
Category: Debarkers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cambio
Model: 71-75
Owner believes it is a model 71-75, but cannot find an ID plate., Includes: Misc parts and roller withs over $25,000.
Carolina Machinery Sales has 13 more
listings in Debarkers.
175 KW Josephson #FR-7001, diesel powered generator set, 115/460 Volts
Category: Diesel Generators
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Josephson
Model: FR-7001
175 KW -175 KVA, 264 amps at 460v, John Deere diesel powered, 460v - 208v - 115v outlets, housed in a container with ample access doors.
Carolina Machinery Sales has 3 more
listings in Diesel Generators.
10750 sq.ft. Safe-Heat #SH-2000, NG heater, 2000000 BTU, 230/460 V., 2020
Category: Direct Fired Heaters
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: SH-2000
Year: 2020
Type: Propane/Natural Gas, Weight: 1500lbs, Max BTU: 2,000,000, Voltage: 230/460V, Heating Area: 10750 Sq. Ft, Dimensions: 60"L x 110"W x 48"W, Built-In Thermostat.
Dovetail Wood Joint Machines
2 Results
Hoffman #PU2, Dovetail Routing Machine
Category: Dovetail Wood Joint Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hoffman
Model: PU2
Hoffman PU2.
Carolina Machinery Sales has 1 more
listing in Dovetail Wood Joint Machines.
Dowel Milling Machines
1 Result
Castaly #BR120 BECT double end chucking & threading machine, 15"-47" stock range, 3/8"-1-1/2" stock diameter, 2022
Category: Dowel Milling Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Castaly
Model: BR120
Year: 2022
Manufacturer, BR120DECT, Range of Stock Length15" ~ 47", Range of Stock Diameter3/8" ~ 1-1/2", Production Rate10 ~ 30 PCS/MIN Cutterhead Speed3400 rpm, Cutterhead Motors 2hp, Feeder Motor2 HP, Weight1600 LBS.
Dryers and Coolers
1 Result
McConnell 40-50 MM BTU Gas Burners (2 available)
Category: Dryers and Coolers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mcconnell
(2) McConnell 40-50 MM BTU Gas Burners available.
Dust Collectors
35 Results
1400-3800 cfm Coral Icon Class, Dust Collector, easy installation
Category: Dust Collectors
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Coral
Model: ICON CLASS
New in the crate - Ready to ship!, The ICON class dust system from Coral comes in 1-5 bag systems ranging from 1,400-3,800 CFM., - Easy installation!, - Plug & Play setup, - 3-10 HP Available!.
Carolina Machinery Sales has 34 more
listings in Dust Collectors.
Friulmac #Randomat-E, End Matcher, 2004
Category: End Matchers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Friulmac
Model: RANDOMAT-E
Year: 2004
- End Matcher for the Continuous Feeding of Random Length Work Pieces, - Minimum Working Length: 160mm (6.3"), - Working Width: 30-250mm (1.18"-9.84"), - Working Thickness: 10-30mm (0.39"-1.18"), - Two 7-1/2 HP, 3ph Profiling Motors, - Spindle Speeds: 6,800 RPM, - Spindle Diameters: 40mm, - Cutterhead Feed Motor: 1 ...more
Carolina Machinery Sales has 3 more
listings in End Matchers.
Engineered Wood Flooring Machinery
1 Result
Woods #502M, planer moulder, hardwood flooring machine
Category: Engineered Wood Flooring Machinery
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Woods
Model: 502M
Woods 502M hardwood flooring machine.
3000 cfm @ 5.5" S.P., Twin City Fan & Blower 5 HP Fan
Category: Fans
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Twin City
3000 CFM, 5 HP, 5-1/2” static pressure.
Carolina Machinery Sales has 1 more
listing in Fans.
Feeding and Straightening Machines
2 Results
Baker, 3-Strand Descrambler, 78" width x 258" L, AS IS
Category: Feeding and Straightening Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Baker Descrambler, 3 strand, 6′6” wide x 21′6” long, No drive motor, Has gearbox, Missing one infeed chain, Ready to load.
Carolina Machinery Sales has 1 more
listing in Feeding and Straightening Machines.
Feller Bunchers - Track and Wheel
4 Results
John Deere #653 Feller Buncher, 13500 hours (1500 hours on refurbished engine), runs well, 1996
Category: Feller Bunchers - Track and Wheel
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: John Deere
Model: 653
Year: 1996
1996 John Deere Feller Buncher, 13,500 hrs (1500 hrs on refurbished engine), Runs Well.
Carolina Machinery Sales has 3 more
listings in Feller Bunchers - Track and Wheel.
200 HP Cleaver-Brooks, Boiler, 2014
Category: Firetube Boilers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cleaver-Brooks
Year: 2014
Cleaver Brooks 200 HP Boiler.
Carolina Machinery Sales has 9 more
listings in Firetube Boilers.
Flooring Finishing Lines
1 Result
Ogden PUR Laminating Line, hopper feeder, glue applicator, drum melter, manual cut of saw, 2021
Category: Flooring Finishing Lines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Ogden
Year: 2021
Ogden PUR Laminating Line, - Hopper Feeder, - Glue Applicator, - Drum Melter, - Substrate Transfer, - Roll Press - CRP14, - Manual Cut Off Saw.
Reed-Prentice 2190 Track Harvester, CAT 6.6 Alert Engine, 2013
Category: Forestry Machinery
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Reed-Prentice
Model: 2190 TRACK HARVESTER
Year: 2013
Prentice 2190 Track Harvester, CAT 6.6 Alert Engine, 11,000 hours repairs: New motor, final drives, ECM, wiring harness, 16,000 hours repairs: New injectors, injection pump, water pump, measuring system, fuel filter housing, top rollers (All work done by CAT).
Carolina Machinery Sales has 3 more
listings in Forestry Machinery.
Forklift Truck Attachments - Miscellaneous
1 Result
Custom Built 7 Foot Forklift Boom
Seller: Carolina Machinery Sales
Location: Monroe, NC
7 foot reach, as pictured.
Forklifts
6 Results
3000 lb. Raymond #SA-3SR30T, Order Picker/Fork Lift, 42" forks, 135" lift height, 48 volt battery electric
Category: Forklifts
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Raymond
Model: SA-3SR30T
Raymond Swing Reach Forklift, 3000# Capacity @ 24@ load center, 48 volt battery electric, New Battery, Complete with charger, 42” forks, Max lift height approx 135”.
Carolina Machinery Sales has 5 more
listings in Forklifts.
Form Fill Sealing Machines
2 Results
Hamer #2040, Form Fill Seal Bagger, upgraded 2080 jaw & side seal bar, controls, outfeed conveyor
Category: Form Fill Sealing Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: 2040
Hamer 2040 Bagging Line, Upgraded 2080 Jaw and Side Sealing Bar, FFS, Controls, Outfeed conveyor, No scale or bin included.
Carolina Machinery Sales has 1 more
listing in Form Fill Sealing Machines.
3-1/2" Mereen Johnson #312-DC, Gang Rip Saw
Category: Gang Rip Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mereen Johnson
Model: 312-DC
Year: 2003
Manufacturer (to be confirmed):, - Mereen Johnson "312-DC-1" Gang rip saw, - 12" Arbor cap., 14" max. dia. tooling, 3-1/2" max. thickness, 30" min. length for glue joint accuracy & 22" min. for busting only; 6" throat., - 50 HP - 3,600 RPM TEFC Direct drive motor, - Arbor with disc brake & load meter, - Arbor ...more
Carolina Machinery Sales has 52 more
listings in Gang Rip Saws.
Gasoline or Propane Generators
1 Result
Winco #545CS-23R/A, multi voltage propane generator, 208-240-480/240 Volts, 1800 RPM, Zenith Auto ctrl, 30 hours
Category: Gasoline or Propane Generators
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Winco
Winco Generator, Model #545CS-23R/A, Volts 208-240-480/240, RPM 1800, Phase 3/1, Amps 139-120-60/167, KW 40/40, KVA 50/40, Hertz 60, 318 Chrysler, Propane, less than 30 hrs, Zenith Automatic Control Box.
Glass Cutting Machines & Equipment
2 Results
Intermac #Genius-37-LS-MT Glass Cutting Line
Category: Glass Cutting Machines & Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Intermac
Model: GENIUS-37-LS-MT
Intermac Genius 37 LS-MT Glass Cutting Line.
Carolina Machinery Sales has 1 more
listing in Glass Cutting Machines & Equipment.
Glue & Dowel Insertion Machines
5 Results
Biesse #Elix-K3, bore & dowel machine, 2020
Category: Glue & Dowel Insertion Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: ELIX-K3
Year: 2020
Max. Width: 51.2″, Thickness: 0.4″ – 1.6″, Min. Depth: 4.7″, X Axis:51.2″, Head Movement Speed: 131.2 ft/min, Z Axis: 1.6″, Boring Unit:, Rotation Speed: 6000 rpm, Depth: 1.2″, Max. Bits Diameter: 0.47″, Modified Dowel Insertion Size:.19″ to.24″ ...more
Carolina Machinery Sales has 4 more
listings in Glue & Dowel Insertion Machines.
Black Brothers #22D, Glue Spreader, Max working width 50" Max working thickness 3"
Category: Glue Spreaders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Black Brothers
Model: 22D
Black Brothers 22D glue spreader, Max working width 50"Max working thickness 3", 1/2 Hp, 230/460 volt three phase drive motor, Table passline height 40", 7-1/4" diameter x 50-1/2" long top and bottom chrome doctor rollers, 9" diameter x 50-1/2" long top and bottom rubber covered applicator rollers, (Please note that ...more
Carolina Machinery Sales has 3 more
listings in Glue Spreaders.
Caterpillar #525C, Grapple Log Skidder
Category: Grapples
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Caterpillar
Model: 525C
CAT 525C Grapple Log Skidder.
Carolina Machinery Sales has 1 more
listing in Grapples.
Grinding Mills - Ball, Pebble, Sag, Mining
1 Result
Sew Ball Milling Machine
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Sew
Ball Milling machine.
Hammermills for Wood Processing
4 Results
MEC 75 HP Hammermill
Category: Hammermills for Wood Processing
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mec
75 HP Hammermill.
Carolina Machinery Sales has 3 more
listings in Hammermills for Wood Processing.
Weima #Beaver-300, Horizontal Grinder, w/ Vibrating Infeed, 16' Mellott infeed, 25 HP main motor, 7699 yrs, 2019
Category: Hog Mills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Weima
Model: BEAVER-300
Year: 2019
Weima Beaver 300 Horizontal Grinder with Vibrating Infeed, Mellott Infeed, 25 HP Main Motor, 16' Infeed, 460v/3Ph.
SP Industries #CP2101-HD, Horiz Baler, 46.5" x 57.6" opening, 460 V.
Category: Horizontal Balers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Sp Industries
Model: CP2101-HD
SP Industries Model CO2101-HD Bailer, Single cylinder design, 46.5” x 57.625” clear top opening, Designed to handle packaging materials, dry waste and process scraps, 116/121 cu.yds/hr volume displacement, 39,270/56,540 lbs. maximum force, 460 volt.
Horizontal Band Saws
2 Results
10" x 11-3/4" High Point Tool #HP-11, horizontal band saw, 13-90 FPM, 2004
Category: Horizontal Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: High Point Tool
Model: HP-11
Year: 2004
Single Head Horizontal Band Re-saw System, Model : HP-11P-SMART, • Single saw head configuration. • Motor powered set works for accurate saw wheel elevation. • Digital position controller permits accurate saw wheel height positioning. • Automatic blade tension is controlled by hydraulic cylinder. ...more
Carolina Machinery Sales has 1 more
listing in Horizontal Band Saws.
Global Trio #GT-A-3116-00, Vert Vacuum Press, 123.6" x 63.6" work area, 392°F max, 82 cfm pump, 50 kw, 380 V., Schneider PLC Control, w/ wifi, adjustable feet, fans, 2020
Category: Hot Vacuum Presses
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: GT-A-3116-00
Year: 2020
The GT-V-3116-00 global trio vertical, preheating, sublimation and thermoforming in one machine., Total Pressing Area 123.6” x 63.6” (3140 x 1616 mm)., Effective Heating & Sublimation rea 123.6” x 63.6” (3140 x 1616 mm)., Sublimation / oven drawer configuration below pressing table., (1) ...more
Fanuc, E-81036, Robots, 3 phase power, low hours, 2015 (2 available)
Category: Industrial Robots
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Fanuc
Model: E-81036
Year: 2015
2 available, 3 phase power, liow hours.
Carolina Machinery Sales has 5 more
listings in Industrial Robots.
Industrial Woodworking Upcut Saw
5 Results
Brewco #6x8, Up Cut Saw, 20" blade, in/out feed rolls
Category: Industrial Woodworking Upcut Saw
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Brewco
Model: 6X8
Brewco Pop Up Saw, 6x8 capacity, 20” blade, infeed and outfeed rolls.
Carolina Machinery Sales has 4 more
listings in Industrial Woodworking Upcut Saw.
.1 Ton, Gorbel Jib Crane, 12' Arm, 4 HP Pump
Category: Jib Cranes
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Crane
12' Arm, 250 Lbs Capacity, 4 HP Pump, Per owner: head only turns horizonally.
6 x 20" Newman #G-200, Knife Grinder, 10" grinding wheel, 1/8" to 1" thickness capacity
Category: Knife Grinders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Newman
Model: G-200
Very clean Newman G-200 Knife grinder. In good working order, grinds 17" on the inside and 20" on the outside.
Carolina Machinery Sales has 6 more
listings in Knife Grinders.
Caterpillar 559C, Knuckleboom loader
Category: Knuckleboom Loaders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Caterpillar
Model: 559C
Cat 559 C Knuckle Boom loader.
Carolina Machinery Sales has 3 more
listings in Knuckleboom Loaders.
14" Union Tool #Series-15-C, Dual Lane Laminator Line, lay-up, in & outfeed conveyors, w/ unloader, hot melt roller coater & rotary laminator, 2013
Category: Laminating Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Union Tool
Model: SERIES-15-C
Year: 2013
1) 10' long Dual Lane Infeed Conveyor, 2) Graco Therm-O-Flow 200 55 Gallon Drum Unloader, 3) Union Series #5, Model A, 14" Hot Melt Roller Coater, 4) Union Dual Lane Lay-Up Conveyor, 5) Union Series #5, 14" Five (5) Nip Rotary Laminator, 6) 10' long Dual Lane outfeed Conveyor.
Carolina Machinery Sales has 4 more
listings in Laminating Machines.
Lift Tables
5 Results
2000 lb. Scissor Lift Table
Category: Lift Tables
Seller: Carolina Machinery Sales
Location: Monroe, NC
2,000 lb Capacity - hydraulic scissor lift table Tables measures - 52" x 40" x 40" lift Hand held control or foot pedal. Machines were bought brand new and never put into production.
Carolina Machinery Sales has 4 more
listings in Lift Tables.
Daewoo Doosan #P185/HP150WDO-T4F, portable lighting with only .2 hours, 2021
Category: Light Towers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Daewoo Doosan
Model: P185/HP150WDO-T4F
Year: 2021
DOOSAN portable lighting with only.2 hours.
Caterpillar #559B, Log Loader, 2012
Category: Logging Machinery
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Caterpillar
Model: 559B
Year: 2012
CAT 559B Log Loader.
Carolina Machinery Sales has 7 more
listings in Logging Machinery.
American Wood Dryer Dry Kilns
Category: Lumber Dry Kilns
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: American
American Wood Dryers Kilns.
Carolina Machinery Sales has 31 more
listings in Lumber Dry Kilns.
Material Handling Equipment
5 Results
12' Vibration Conveyor tables, Gruber Systems (7 available)
Category: Material Handling Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Gruber
There are (7) Table available.
Carolina Machinery Sales has 4 more
listings in Material Handling Equipment.
Material Handling for Woodworking
21 Results
ASGCO, 48" Chip Conveyor, approx 100' long
Category: Material Handling for Woodworking
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Asgco
ASGCO 48" Chip Conveyor, Approx 100' long.
Carolina Machinery Sales has 20 more
listings in Material Handling for Woodworking.
30' Barn Sweep conveyor, w/ 19' incline, 1.5 HP, Vortex gearbox
Category: Misc. Agricultural Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
Barn sweep, 30′ Flat and 19′ Incline, New vortex gearbox, 1.5 HP, low hours ...more
Carolina Machinery Sales has 1 more
listing in Misc. Agricultural Equipment.
Miscellaneous Construction Equipment
1 Result
Decorative Curbmaking #Model-225, Curb Machine
Category: Miscellaneous Construction Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Decorative Curbmaking
Model: MODEL-225
Decorative Curbmaking model 225.
Doucet #MSP-SRH-36, Return Conveyor, 40' belt & rollers, 2022
Category: Miscellaneous Conveyors
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Doucet
Model: MSP-SRH-36
Year: 2022
Doucet Return Conveyor, Includes: Doucet 40' Belt Conveyor, Available approximately mid December 2025.
Carolina Machinery Sales has 1 more
listing in Miscellaneous Conveyors.
Miscellaneous Furnaces, Ovens and Parts
2 Results
Tuff-stik #XS, Aluminum Kiln Stick
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: TUFF-STIK #XS
Tuff Stik Model XS Aluminum Kiln Stick, - 3/4" x 3/4" Profile, - Designed for Compact Auto Stackers, - Made for Thermal Modification and Hardwood kilns, - Better air flow, - No sticker stain, - No more wasted wood sticks for your scrap pile!, - No wood waste to remove!.
Carolina Machinery Sales has 1 more
listing in Miscellaneous Furnaces, Ovens and Parts.
24" Drum sander, Grizzly #G10662, 5 HP, 6" Drums, 11 FPM
Category: Miscellaneous Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Grizzly
Model: 24 DRUM SANDER
24” width capacity, 5HP motor, 6” drums, 11fpm.
Carolina Machinery Sales has 1 more
listing in Miscellaneous Sanders.
16" Joseph Machine #DM4590, Dual Miter Saw, 240 V.
Category: Miter Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Joseph Machine
Model: DM4590
Cuts with a 16" carbide tipped saw blade, 240V/480V 3 phase, 7-10 seconds per cycle.
Carolina Machinery Sales has 1 more
listing in Miter Saws.
Baker #2-Head, Double Notching Machine, w/ automated IT stacker
Category: Notching Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: 2-HEAD
Baker Double Head Notcher, Unscrambler, AIT M2L Automatic board stacker.
Carolina Machinery Sales has 5 more
listings in Notching Machines.
Oil/Water Separators
1 Result
Zeks #50HSFA100, Air Compressor Water Separator, single phase 115V 16hz, good condition
Category: Oil/Water Separators
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Zeks
Model: 50HSFA100
Air Compressor Water Separator, Single Phase 115V 16hz, Good Condition.
Optimizing Cross-Cut Saws
4 Results
Barr Mullin #Opti-Rip Wondersaw, Computerized Laser Controls
Category: Optimizing Cross-Cut Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Barr Mullin
Model: OPTI-RIP
Barr Mullin Wondersaw Optimizer with Computerized Laser Controls, Tichniess: Up to 3", Width: 31", Min cut: 4", Feed height: 34-1/2", Floor Space: Apprx 21' x 15', 480 volt.
Carolina Machinery Sales has 3 more
listings in Optimizing Cross-Cut Saws.
Onsrud #3025, Inverted Pin, Router, 5 HP, 230 V., 3 Ph, 1994
Category: Overarm Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Onsrud
Model: 3025
Year: 1994
The machine has been cleaned, checked and repaired, 5HP, 230V, 3Ph.
Carolina Machinery Sales has 1 more
listing in Overarm Routers.
Brewer Unscrambler
Category: Packaging Unscramblers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Brewer Unscrambler, Very Good Condition.
Paint and Powder Systems
1 Result
Makor #Q-One, Spray Line, w/ Ovens & Pumps, 2013
Category: Paint and Powder Systems
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: MAKOR #Q-ONE
Year: 2013
Makor Q One spray machine, All pumps and guns, Two Laminar electric ovens, Butfering brush machine, Minimal use machine, Ready to ship.
Pallet Nailers and Pallet Equipment
53 Results
Alliance Automation Robotic pallet dismantler, infeed rollers, robot, band dismantler, outfeed conveyor, 2022
Category: Pallet Nailers and Pallet Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Alliance
Year: 2022
Alliance Automation Robotic Pallet Dismantler, Infeed rollers, Robot, Band Dismantler, Outfeed conveyor.
Carolina Machinery Sales has 52 more
listings in Pallet Nailers and Pallet Equipment.
Biesse #Selco-SK-4 Panel Saw, 2023
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: SELCO-SK-4
Year: 2023
Biesse SK 4 Panel Saw.
Carolina Machinery Sales has 29 more
listings in Panel Saws.
Pellet Mills and Briquetting Machines
16 Results
Andritz Sprout #26, Pellet Mill, center feeder, base w/ jackshaft (4 available)
Category: Pellet Mills and Briquetting Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Andritz
Model: 26
There are (4) mills available. Three of them have been reconditioned. The other is used. All are ready to ship immediately. These mills come with a large inventory of spare parts., - Model 26 - Door, Center Feeder, Main Shaft assembly, Conditioner, Motor base with jackshaft (no motor), - Model 26 - Door, Center ...more
Carolina Machinery Sales has 15 more
listings in Pellet Mills and Briquetting Machines.
Plating Equipment and Plating Dip Tanks
2 Results
Dip Tank, 4500 gallon capacity, control panel, adjustable dip time
Seller: Carolina Machinery Sales
Location: Monroe, NC
Dip Tank, 4500 gal water capacity, 2 bundles at a time, Control panel on front, Adjustable dip time, 6' Wide x 20' Long x 6' Deep.
Carolina Machinery Sales has 1 more
listing in Plating Equipment and Plating Dip Tanks.
Power Squaring Shears (Inch)
1 Result
3/8" Cincinnati #2512, shear, converted to fast shear in 2020
Category: Power Squaring Shears (Inch)
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cincinnati
Model: 2512
This machine has been reconditioned in 2020 and converted into a "Fast Sheer", Total Length-, Total Capacity - 3/8" mild steel.
Precision and Second Operation Lathes
1 Result
Victor #616, precision lathe, 2 HP, 440 V., 5C lever collet, Yaskawa inverter dr, coolant pump
Category: Precision and Second Operation Lathes
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Victor
Model: 616
Victor Model 616 Lathe, 2 HP 440 volt 3- Phase, Manufacturer′s (to be verified), - Easy to read digital display on actual spindle rpm, - High precision preloaded ball bearing 6-station turret with indexing lever, - Fully enclosed preloaded angular contact ball bearing headstock with splash shield for spindle, - ...more
Prefabricated and Portable Buildings
1 Result
100' x 180' Pre-engineered Building, 2026
Category: Prefabricated and Portable Buildings
Seller: Carolina Machinery Sales
Location: Monroe, NC
Year: 2026
**Photo for reference only**, Smith Built Pre-Engineered Building, 100'x180' Building, Building is built and ready to ship. Seller will not be installing at their facility. Available immediately with all plans in d installation instructions.
Cantek #JF330A, profile grinder, 12" L max, 3 HP, 12" swing, 2019
Category: Profile Grinders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cantek
Model: JF330A
Year: 2019
Maximum length of straight grind 12″, Maximum length of profile grind 12″, Maximum diameter of swing 12″, Max. depth of profile with 140mm hub 1.6″, Max. depth of profile with 110 mm hub 2″, Grinding motor 3 HP, Grinding wheel size 225 mm dia. x 60 mm bore, Machine dimensions 41 x 44 x ...more
Carolina Machinery Sales has 6 more
listings in Profile Grinders.
Pulverizers and Hammermills
1 Result
CME, Hammermill, 400 Hp
Category: Pulverizers and Hammermills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cme
CME 400 HP Hammermill, Rotor: 42" long x 39" Diameter.
4 Bay Stack Rack, 8' x 8' x 5'
Category: Racks and Shelving
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: 4 BAY STACK RACK
4 Bay Stack Rack, 8′ x 8′, 5′ tall .
Carolina Machinery Sales has 2 more
listings in Racks and Shelving.
Dewalt #Model-G1, Radial Arm Saw
Category: Radial Arm Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dewalt
Model: MODEL-G1
Dewalt Radial Arm Saw.
Carolina Machinery Sales has 1 more
listing in Radial Arm Saws.
Reciprocating Surface Grinders - Horizontal Spindle
1 Result
Reid #2A, surface grinder, good working condition
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Reid
Model: 2A
Reid N0. 2A Surface Grinder, Good Working Condition.
Reciprocating Type Air Compressors
1 Result
Champion #HR315-GCC, Air Compressor, 3 HP, good condition
Category: Reciprocating Type Air Compressors
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Champion
Model: HR315-GCC
Champion Air Compressor Model HR315-GCC, Good Condition.
Baker #ABX, Horizontal Re-Saw, 2019
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: ABX
Year: 2019
- Number of heads: 1, - Guides: Baker Low-Profile Flat Guides with hardened tool steel guide plates with rear backup roller guide wheels, - Dust Output: 6"x6" (15.24cm x 15.24cm) square outlet with a 90° adapter chute with a 4" (10.2 cm) diameter outlet, which can be rotated to serve four directions of discharge. ...more
Carolina Machinery Sales has 60 more
listings in Resaw Band Saws.
Ribbon Mixers and Blenders
1 Result
100 cu.ft. Stainless Steel Double Ribbon Blender w/motor, 3' W x 9' L x 4' D Inside Dimensions
Category: Ribbon Mixers and Blenders
Seller: Carolina Machinery Sales
Location: Monroe, NC
100 Cu-Ft. Stainless Steel Double Ribbon Blender with Motor, U-Shaped Trough with Additional Extended Top, Grate & Cover., Chain-Driven Motor w/Safety Cage, Inside Dimensions: 3'W x 9'L x 4' Deep, Last used to blend 2400 lbs. of light powdered product, Will hold 4500 lbs. of product!.
Right Angle T Engine Lathes
1 Result
60" Lodge & Shipley #T-60, Right Angle Chucking Lathe
Category: Right Angle T Engine Lathes
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Lodge & Shipley
Model: T-60
Lodge & Shipley T 60" Right Angle Chucking Lathe, System will need to be rigged out of current location. It is still under power for inspection.
Rigma #RR-W4CCB, (2) Roll Coaters, 1350 Max capacity
Category: Roll Coaters
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Rigma
Model: RR-W4CCB
Year: 2014
(2) Rigma Roll Coaters available, Model RR-W4CCB, 1350 Max capacity.
Armstrong #4 Motorized Bandsaw Stretcher Roll
Category: Roll Grinders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Armstrong
Model: 4
Used Armstrong #4 Motorized Bandsaw Stretcher Roll, Needs lower arm pillow block and roller chain.
33.5" wide x 64' long, Gravity Roller Conveyor Belt, 30" rollers
Category: Roller Type Conveyors
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Gravity
64 ft long, 33.5 inch wide, 30 in rollers.
Carolina Machinery Sales has 5 more
listings in Roller Type Conveyors.
Rotary Drum Dryers
14 Results
8' x 24' Drum Dryer with Webb Burner, drum, burner, cyclone ductwork and blower
Category: Rotary Drum Dryers
Seller: Carolina Machinery Sales
Location: Monroe, NC
8x24 Drum Dryer, Webb stye burner, Includes: Drum, burner, cyclone ductwork and blower.
Carolina Machinery Sales has 13 more
listings in Rotary Drum Dryers.
Rotary Screw Air Compressors (Positive Displacement)
9 Results
63 cfm, US Air Air #US-15DI, Air Compressor, 15 HP, 460 V., 3-phase, 2019
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Us Air
Model: US-15DI
Year: 2019
15 HP, 460 volt 3-phase, 63 CFM Capacity.
Carolina Machinery Sales has 8 more
listings in Rotary Screw Air Compressors (Positive Displacement).
100 HP Blower
Category: Rotary-Positive Blowers
Seller: Carolina Machinery Sales
Location: Monroe, NC
This unit was blowing dust to a large baghouse in a large facility. There is also a 75 HP blower and baghouse available at the same location. Piping is available. Unit will be loaded on the truck.
Armstrong #2LH, bandsaw sharpener, left hand
Category: Saw Sharpeners
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Armstrong
Model: 2LH
Armstrong #2 Band Saw Sharpener, Left Hand.
Carolina Machinery Sales has 10 more
listings in Saw Sharpeners.
Adco West #Canter Sawmill, refurbished, with Keyknife chipping heads including power
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Adco
Model: CANTER
AdcoWest Sawmill Canter, - REFURBISHED, - Keyknife chipping heads including power, - (3) 40 HP Heads and (1) 20 HP (lower head) as specified by head manufacturer, No wiring, switches, set works, or controls included but electric motors present are included., Feed through system as engineered by AdcoWest and operated ...more
Carolina Machinery Sales has 69 more
listings in Sawmills.
Avery Truck Scales, approx. 75' long
Category: Scales
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Avery
Avery Truck Scales, Approx 75' Long, More information coming.
Scissor Lifts
9 Results
2000 lb. Presto #XL-36-20, Scissor Lift Table
Category: Scissor Lifts
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Presto
Model: XL-36-20
Presto Scissor Lift Table, 2000 lb Capacity.
Carolina Machinery Sales has 8 more
listings in Scissor Lifts.
Screens and Sifters
3 Results
2-1/2" x 6" Sprout-Waldron, shaker screener
Category: Screens and Sifters
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Sprout-Waldron
Sprout- Waldron shaker screener, was running when pulled out of production.
Carolina Machinery Sales has 2 more
listings in Screens and Sifters.
B & C, Heil, Jackson, Complete Shaving Mill, 2-Heads, 50 HP each, Infeed log deck, 8" heads with 8-rows of knives
Category: Shaving Mills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: B&c
B&C 8' Shaving Mill: 3-Heads, 50 HP each, Infeed log deck, 8" heads with 8-rows of knives, Outfeed conveyors to drum and stacking room, 8'x24' Heil Triple pass drum dryer, Jackson Webb Burner.
Carolina Machinery Sales has 4 more
listings in Shaving Mills.
Dopostadt #AK-230, Shredder, 210 HP, 2008
Category: Shredders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dopostadt
Model: AK-230
Year: 2008
Manufacturer, to be verified., The Doppstadt AK230 is a powerful and efficient solution for shredding wood, green waste, used pallets, brush, and wood debris. Its advanced design s a fuel-efficient 210 HP diesel engine, complete with a block heater and hydraulic tank heater for reliable performance in all conditions. ...more
600 lb. SDLOOL #323W, Skid Steer, 42" Bucket, 2023
Category: Skid Steers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Sdlool
Model: 323W
Year: 2023
New Briggs & Stratton 13.5 motor, Aux. hydraulics, 42 inch bucket, 600lb lift, Electric Start.
Carolina Machinery Sales has 2 more
listings in Skid Steers.
Caterpillar #525C, Dual arch skidder, 12700 hours, 30.5 x 32 tires, 2010
Category: Skidders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Caterpillar
Model: 525C
Year: 2010
2010 Cat 525C, Dual arch skidder, 12,700 hours, 30.5 X 32 tires.
Carolina Machinery Sales has 3 more
listings in Skidders.
Wood-Mizer, 3-Way Sorting Table, fixed blade
Category: Sorting Lines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Wood-Mizer
Cooks 2-Saw Edger with (1) Movible Blade and (1) Fixed Blade, Woidmizer 3-Way Sorting Table.
Carolina Machinery Sales has 1 more
listing in Sorting Lines.
Squirrel Cage AC Electric Motor
1 Result
75 HP 1775 RPM Westinghouse, Frame 4057, 1.15 service factor, 550 Volts
Category: Squirrel Cage AC Electric Motor
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Westinghouse
Frame: 4057
75 HP, 550 Volt 3 phase.
Irvington Moore, Lumber Stacker, w/ Unscrambler
Category: Stackers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Moore
Irvington Moore Lumber Stacker, Can make packs 4'-8', Was running approximately 4-5 years ago.
Carolina Machinery Sales has 2 more
listings in Stackers.
Stone Machining Centers
1 Result
Cms #Concept-2.1 CNC, automatic tilting head, telescoping spindle extension, 2006
Category: Stone Machining Centers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cms
Model: CONCEPT-2.1
Year: 2006
This machine is in good working condition and can be inspected under power. (to be confirmed): - Electric spindle 18.1 HP - X-axis stroke 145.66î - Y-axis stroke 82.67î - Z-axis strke 13î - Working area 145.66î x 68.90î - Automatic tilting head - Telescoping spindle extension for surface ...more
Straight Line Rip Saws
15 Results
Cantek #01-RS, Straight Line Rip Saw, w/ Tigerstop, 230 V., 3ph
Category: Straight Line Rip Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cantek
Model: 01-RS
Cantek Straight Line Rip Saw with Tigerstop, 230 volt 3-phase.
Carolina Machinery Sales has 14 more
listings in Straight Line Rip Saws.
Delta Table Saw, 5 HP, 230 volt 3-phase
Category: Table Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Delta
Delta Table Saw, 5 HP, 230 volt 3-phase.
Carolina Machinery Sales has 6 more
listings in Table Saws.
Tank Mounted Air Compressors
6 Results
5 HP Champion Horizontal Compressor, 575 Volts, 2 Stage, 24 cfm unit
Category: Tank Mounted Air Compressors
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Champion
Champion 5 HP 575 Volt, 2 Stage, 24 CFM unit.
Carolina Machinery Sales has 5 more
listings in Tank Mounted Air Compressors.
Telehandlers
1 Result
11000 lb. Manitou #MRT-2150P, Telehandler, 68'7" lift height, 58'9" reach, diesel, 11000 hours, 2020
Category: Telehandlers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: MRT-2150P
Year: 2020
Manitou MRT 2150P Telehandler, S2 Rotator, 5T Winch, P2000 Winch with Jib, Forks, Great Condition, Runs Well, Approximately 11,000 hrs, Max Capacity: 11,000 pounds, Max Lifting Height: 68'-7", Max Outreach: 58'-9", Power: 156 HP, Width: 8'-2", 18'-3" with stabilizers lowered, Height: 10'-0" ...more
Balestrini #Pico-MD-2, CNC Mortise And Tenon Machine
Category: Tenoners
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Balestrini
Model: PICO-MD-2
Year: 2007
Balestrini Pico MD-2 CBC Mortise And Tenon Machine, Seller′s, - 5-1/2HP Tenon Motor @ 9,000/12,000rpm, - 2-1/2HP Mortising Motor @ 9,000/12,000/18,000rpm, - Table Dimensions: 35″ x 12.5″, - Fence Adjustments: 0 to 45 degrees, - CNC:, - Model: NUM 1020, - Monitor: 15″ Color Touchscreen, - ...more
Carolina Machinery Sales has 7 more
listings in Tenoners.
Thermoformer Machines
1 Result
Burkle #Multifoiler-M8, thermoformer, 2007
Category: Thermoformer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Burkle
Model: MULTIFOILER-M8
Year: 2007
Great Lakes Trailer With Hood 7000 Loader, 1990
Category: Trailers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Great Lakes
Year: 1990
1990 Great Lakes Trailer With Hood 7000 Loader.
Carolina Machinery Sales has 2 more
listings in Trailers.
Trucks and Flatbeds
4 Results
Ford #Aeromax-L9000 Tractor, 1995
Category: Trucks and Flatbeds
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Ford
Model: AEROMAX-L9000
Year: 1995
Ford Tractor as pictured.
Carolina Machinery Sales has 3 more
listings in Trucks and Flatbeds.
Ultraviolet (UV) Curing Ovens
7 Results
American 2-Stage Ultraviolet Oven, stage 1 48" width, 2-lights, stage 2 40" width, 3-lights
Category: Ultraviolet (UV) Curing Ovens
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: American
Stage #1, 48” width, 2 lights, Stage #2, 40” width, 3 lights, 220 volt singular phase.
Carolina Machinery Sales has 6 more
listings in Ultraviolet (UV) Curing Ovens.
Vertical Band Saws
1 Result
16-1/2" x 16" Grizzly #G0636X, Band Saw, 25-1/2" x 21" table, 162" blade, 5 HP, 2021
Category: Vertical Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Grizzly
Model: G0636X
Year: 2021
2021 Grizzly G0636X 17" Band Saw, - Motor: 5 HP, - Max cutting width: 16-1/2 in., - Max cutting height: 16 in., - Table size: 25-1/2 in. x 21" in.", - Wheel type: Computer-Balanced Cast Iron, - Blade size: 162 in., - Quick blade change: Yes, - Overall height: 78-1/2 in., - Shipping weight: 784 lbs.
Vertical CNC Machining Centers
1 Result
Haas #VF-2SS-126 Super-Speed Vertical Milling Machine CNC Center with Robot Package, 2021
Category: Vertical CNC Machining Centers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Haas
Model: VF-2SS-126
Year: 2021
Haas VF-2SS-125 Super Speed Vertical Milling Machine CNC Center with Robot Package, 30" x 16" x 20", 4th Axis Drive, Chip Auger, High Speed Machining Option, Wireless Probe System, Aux Coolant Filter, Programmable Coolant, Dynamic Work Offset, Chip Strainer, WIFI Camera, Programmable Air, Aluminum jaws 100 mm, Robot ...more
Vibrating Screens
2 Results
60" x 120" Midwestern #MEV, high-frequency screen, 3 screening decks, never used, 2022
Category: Vibrating Screens
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Midwestern
Model: MEV
Year: 2022
Brand New, Never Used, 5' x 10', 3 Screening Decks.
Carolina Machinery Sales has 1 more
listing in Vibrating Screens.
Welding Positioners
1 Result
Deuma Welding Positioner, 2009
Category: Welding Positioners
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Deuma
Year: 2009
Deuma RF/S150 A-V.
Gradall #XL3100, Excavator, Weight 18.57 t, Standard tyres 385/65R22.5 LR
Category: Wheel Excavators
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Gradall
Model: XL3100
Weight18.57 tStandard tyres385/65R22.5 LRBucket capacity0.54 m³Mobile/CrawlerMTransport length8.4 mTransport width2.6 mTransport height3.6 mModel seriesVEngine manuf.VolvoEngine typeTAD572 VEEngine power160.3 kWDimension lxwxh982x854x992 mmDisplacement5.1 lRevolutions at max torque2300 rpmMax. torque910 NmNo. of ...more
John Deere #744L, Wheel Loader, very low hour, 2021
Category: Wheel Loaders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: John Deere
Model: 744L
Year: 2021
Nice clean machine, CB, all lights LED with touchscreen control, very low hours (1195).
Carolina Machinery Sales has 6 more
listings in Wheel Loaders.
Window and Door Manufacturing Machinery (For Aluminum, Vinyl And Wood)
11 Results
Mitre Door Machine, Bacci #TTF1, 40mm blade, 3 HP, PLC controlled, 1998
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Bacci
Model: TTF1
Year: 1998
Machine for manufacturing mitered doors…cuts trims, drills and finger joints corners, 3 HP saw with 400 mm blade, (2) 7-1/2 HP shaping heads clockwise/counter clockwise, PLC controlled.
Carolina Machinery Sales has 10 more
listings in Window and Door Manufacturing Machinery (For Aluminum, Vinyl And Wood).
Window Profile Machining Centers
1 Result
MTC #Harp Machining Center for Windows & Doors, for long and narrow parts, 2024
Category: Window Profile Machining Centers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mtc
Model: HARP
Year: 2024
Harp Series machining Center for long and narrow parts!, Available in 4 or 5 axis systems., Robotic material handling options!, The HARP Series, specifically designed for processing High Aspect Ratio Parts (long & narrow parts), is typically customized with Clamping Fixtures and Spindle Configurations specific to ...more
48" Soderhamn, Portable Chipper With Diesel Engine
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Soderhamn
Soderhamn 48" Chipper, M671 Diesel Engine, Mounted on trailer.
Carolina Machinery Sales has 13 more
listings in Wood Chippers.
Wood Finishing Equipment
18 Results
Burkle #Dal-1-1300, Roll Coater, 1300mm width capacity, 3-80mm panel thickness, 1992
Category: Wood Finishing Equipment
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Burkle
Model: DAL-1-1300
Year: 1992
Manufacturer, Width capacity 1300 mm, Panel thickness: 3 - 80 mm, variable feedspeed 6-30 m/min, Coating roller 55° Shore with variable speed and scraper, Chrome doctor roller with variable speed and scraper.
Carolina Machinery Sales has 17 more
listings in Wood Finishing Equipment.
Wood Grinders and Hogs
31 Results
Bader #BIII Knifemaker Grinder, Includes Many Extra Drive Wheels, Tool Rest
Category: Wood Grinders and Hogs
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Bader
Model: BIII
Bader BIII Knife Grinder, Includes Many Extra Drive Wheels, Extra Attachments For Contact Wheels, Tool Rest, Very Well Maintained.
Carolina Machinery Sales has 30 more
listings in Wood Grinders and Hogs.
Amitec #VT-25-1, 2002
Category: Wood Veneer Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Amitec
Model: VT-25-1
Year: 2002
The seller has confirmed that these (2) Amitec VT veneer slicers are in good working/running condition. They are ready to load! - (2) Available - Slices log cants in the lengthwise direction - Compares to the Marunaka SL-250 - 9-7/8" (250mm) Max lumber slicing width: With up to 9-7/8" high cant, veneer thickness 1/25" ...more
Carolina Machinery Sales has 6 more
listings in Wood Veneer Machines.
600 HP English Boiler, One is set up for wood, second is wood/oil backup and only test fired, 2000 (2 available)
Category: Wood-Fired Boilers
Seller: Carolina Machinery Sales
Location: Monroe, NC
English 600 HP Boiler - (2) Units available, New in 2000, One is set up for wood and only run for 3-years, The second is wood/oil backup and only test fired, 300' Covered Waste Conveyors available to transport waste to boilers, Large capacity bucket load/silo available to store wood waste, Complete ...more
Carolina Machinery Sales has 1 more
listing in Wood-Fired Boilers.
Woodworking - General Machines
42 Results
Armstrong #85, Auto Tip, Automatic Bandsaw Tipping Machine, Set Up For Stellite Tips
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Armstrong
Model: 85
Armstrong #85 Auto Tip, Set Up For Stellite Tips.
Carolina Machinery Sales has 41 more
listings in Woodworking - General Machines.
Woodworking Boring Machines
21 Results
2 Spindle, Woodtech #GH-2, horizontal boring machine, 1"-9" drill centers, 12" L x 24" W table
Category: Woodworking Boring Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Woodtech
Model: GH-2
, Model GH-2, 3 Hp, 230/460 volt three phase drive motor Belt drive to spindle arbor design, (2) Spindle drill head with adjustable centers, Min drill centers 1", Max drill centers 9", Spindle speed 3000 rpm, Machine weight 650 lbs, Vertical table adjustment 4", 24" wide x 12" long machine work table, Pneumatic stock ...more
Carolina Machinery Sales has 20 more
listings in Woodworking Boring Machines.
Woodworking CNC Machining Centers
2 Results
IMA #PX80, Twin Table Machining Center
Category: Woodworking CNC Machining Centers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Ima
Model: PX80
comming.
Carolina Machinery Sales has 1 more
listing in Woodworking CNC Machining Centers.
Woodworking CNC Routers
67 Results
Anderson #Exxact-Plus-Duo, CNC router, 2008
Category: Woodworking CNC Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Anderson
Model: EXXACT-PLUS-DUO
Year: 2008
Anderson Exxact Plus Duo CNC Router, 5x12 Table (dual 5'x6' tables), 18 HP HSK 63F Spindle, 10-Station ATC, 5x5 Drill Block, C-Axis, Windows 11 PC, (2) Becker Vacuum Pumps, This system has been gone through and check by Anderson technician.
Carolina Machinery Sales has 66 more
listings in Woodworking CNC Routers.
Hain Vent Block Drill, 2 x 4 through 2 x 12 on center 2 x 14 & larger off center block size, new never used
Category: Woodworking Drills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hain
Vent Block Drill VBD, New never used, Motor: Heavy Duty 5 HP - 3 phase - 220v or 440 v (Please specify when ordering), Block Sizes: 2 x 4 through 2 x 12 on center 2 x 14 and larger off center, Air Supply: 100 psi, Drills: 3-wing Carbide Tipped, Spindles: Alloy Steel - Double ended, Frame: 2" Steel With Powder Coat ...more
Carolina Machinery Sales has 3 more
listings in Woodworking Drills.
Woodworking Edgebanders
66 Results
Biesse #Akron-245, Edgebander, 2007
Category: Woodworking Edgebanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Biesse
Model: AKRON-245
Year: 2007
Biesse Akron 245, Machine was in good working condition when removed from service. Computer works, but the screen does not.
Carolina Machinery Sales has 65 more
listings in Woodworking Edgebanders.
Woodworking Hot Presses
2 Results
Berthelsen Hot Shuttle Press, 60" X 120", 2-ply, Allen Bradley controls, Sterlco Hot oil heater
Category: Woodworking Hot Presses
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Berthelsen
BERTHELSEN 5' x 10' 2-PLY HOT SHUTTLE PRESS, Alan Bradley Controls, Sterlco Hot oil Heater.
Carolina Machinery Sales has 1 more
listing in Woodworking Hot Presses.
Powermatic #60-HH, Jointer, 4" width capacity, 2 HP, 54 knives, 7000 RPM, 3" cutterhead
Category: Woodworking Jointers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Powermatic
Model: 60-HH
Powermatic 60 HH Jointer, Manufacturers, (to be confirmed), - Cutterhead Diameter, - 3 in., - Cutterhead Speed (RPM), - 7000, - Cutting Capacity Width, - 8 in., - Dust Port Outside Diameter (in.), - 4 in., - Fence Size, - 38 in. x 4-3/4 in., - Gross Weight, - 518, - Input Power, - 230V Single Phase, - Model Number, - ...more
Carolina Machinery Sales has 5 more
listings in Woodworking Jointers.
30" Mattison #55F, back knife lathe, pneumatic feed, rear arbor w/cutter head
Category: Woodworking Lathes
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mattison
Model: 55F
Mattison "55-F" Turning Lathe - Back Knife, 30" Cap. in length and 4" x 4" cap. dia. - Pneumatic feed; rear arbor with cutter-head driven by a 10 HP V-belt motor., Work piece rotation is belt driven by main motor with variable speed gear box, double end drive, mechanical feed of work piece into cutter head., Rear dust ...more
Carolina Machinery Sales has 9 more
listings in Woodworking Lathes.
Complete Operation Complete Chip Mill, 29' x11' Log Deck
Category: Woodworking Mills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Complete chip mill operation. All machinery will need to be moved from the current facility. System includes:, - 29'x11' Log Deck, - Emergency log Deck, - 50' Log Infeed Conveyor, - 57' Incline Bark Conveyor, - 60' Deal Processor w/ Recycle Return Conveyor, - Log Outfeed, - 112' Log Recycle ...more
Carolina Machinery Sales has 1 more
listing in Woodworking Mills.
Woodworking Mortisers
2 Results
Accu-Systems #MMTJ Miter Door Machine
Category: Woodworking Mortisers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Accu-Systems
Model: MMTJ
Manufacturer :, Accu-Systems Miter Door CNC Machining Center Model MMTJ., 3-Axis control for high quality joints and flexibility in machining various sizes of profiles (X, Y, and Z), 2 working zones, 3 HP high frequency spindle for mortise (24,000 RPM), 6 HP high frequency spindle for tenon (18,000 RPM), 1" x 3.5" ...more
Carolina Machinery Sales has 1 more
listing in Woodworking Mortisers.
Costa #Spamatic-220, Moulder
Category: Woodworking Moulders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Costa
Model: SPAMATIC-220
A. Costa Spamatic 220 Molder.
Carolina Machinery Sales has 36 more
listings in Woodworking Moulders.
Woodworking Panel Finishing Systems
2 Results
Stanza, Brush Coating Finish System, 6'-20' Lumber, 125-150 FPM, chain deck
Category: Woodworking Panel Finishing Systems
Seller: Carolina Machinery Sales
Location: Monroe, NC
Stanza Brush Coating Finish System for paint or stain, Still under power. Ready to dismantle and ship!, - 12' Infeed conveyor, - 12' Outfeed conveyor, - Lateral Cross Feed Deck, - Chain deck to Dryer, System is set up for:, - 6'-20' Lumber, - 2.5"-12" Wide material, - 1"-2" Height, - Sherwin Williams ...more
Carolina Machinery Sales has 1 more
listing in Woodworking Panel Finishing Systems.
18" x 6" Newman #S282, Quiet-cut Double Sided Planer, 15 HP feed 50-150 FPM, 1995
Category: Woodworking Planers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Newman
Model: S282
Year: 1995
6” x 18” capacity, 15 HP feed 50-150 FPM, 25 HP top head, 40 HP bottom head, new rubber drive wheels, push button controls, includes cutter grinder.
Carolina Machinery Sales has 20 more
listings in Woodworking Planers.
Woodworking Presses and Cold Presses
15 Results
Black Brothers #4x8, End Load Cold Press, 4' x 8' capacity, opening non-adjustable
Category: Woodworking Presses and Cold Presses
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Black Brothers
Model: 4X8
Black Bros 4 X 8 End Load Cold Press, Capacity of 54″ X 96″ with a 37″ thickness, It has newer main pressure hoses., On the bottom you will find pop up rollers to aid in loading and unloading., The plates are flat and dent free.
Carolina Machinery Sales has 14 more
listings in Woodworking Presses and Cold Presses.
Larick #362, sander, 1.5 HP, TEFC, 1800 RPM, 4" adj., enclosed base, profile discs, 2016
Category: Woodworking Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Larick
Model: 362
Year: 2016
Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- s: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard ...more
Carolina Machinery Sales has 55 more
listings in Woodworking Sanders.
Altendorf #F45, Sliding Table Saw, 1993
Category: Woodworking Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Altendorf
Model: F45
Year: 1993
Altendorf Sliding Table Saw.
Carolina Machinery Sales has 40 more
listings in Woodworking Saws.
Delta #43-459, Shaper, w/ Power Feeder, 5 HP, 208-230/460 V., 1.25" spindle, 7k/10k RPM, 27" x 40" table
Category: Woodworking Shapers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Delta
Model: 43-459
Delta 42-459 Shaper with Piwer Feeder, Manufacturer ( to be confirmed), 5HP 208-230/460V 3 Phase, 1-1/4" Spindle, Forward and Reverse switch, 2 Speeds: 7,000 and 10,000 RPM, Capacity under the nut: 5", Heavy duty Ritter fence, adjustable left and right sides, Extra table wing drilled and threaded for feeder, Table ...more
Carolina Machinery Sales has 7 more
listings in Woodworking Shapers.
Komptech #Terminator-6000S, Mobile Shredder, Approx 3700 Hours, 2018
Category: Woodworking Shredder
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Komptech
Model: TERMINATOR-6000S
Year: 2018
Komptech Terminator Shredder, Approx 3700 Hours.
Carolina Machinery Sales has 2 more
listings in Woodworking Shredder.
Woodworking Tooling & Accessories
1 Result
Tayler Ferris Wheel Clamp Carrier, 1998
Category: Woodworking Tooling & Accessories
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Tayler
Year: 1998
Capacities:, 11” minimum length, 98” maximum length, 1” minimum width, 32” maximum width, 5/8” minimum thickness, 3” maximum thickness, with a conversed glue spreader(model 30J).
Wrapping Machines (including Shrink Wrappers)
2 Results
Halton #LM72R72, Shrink Wrap Machine, 110 V.
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Halton
Model: LM72R72
Halton Shrink Wrap Machine.
Carolina Machinery Sales has 1 more
listing in Wrapping Machines (including Shrink Wrappers).
