back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Hammermills for Wood Processing

10 Results

Bruks #Model-BK-HH-500-X-1800, Wood Hammermill, Material Feeder w/metal detector, Bottom discharge, 400 HP, 2004

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bruks
Model: MODEL BK-HH 500 X 1800
Year: 2004
BRUKS-KLOCKNER Model BK-HH 500 x 1800, Hammer Mill;Complete with the following components and s: --BRUKS Model BK-CF 1500x9050 Material Feeder with Metal Detector (serial 17264 2). -- ...more

Mill Technology #40-44, Vertical Wood Hammermill, 270 deg screen, 44" diameter x 40" width Reversible Rotor, 350 HP, 9-1/2" x 40" infeed opening

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mill Technology
Model: 40-44
MILL TECHNOLOGY CO. (now BÜHLER) High Capacity Hammermill;Complete with the followiing s: -- 270 degree screen, -- 40 inch wide (approx 44" diameter) Reversible Rotor, -- 350 HP ...more

Schutte #1380, Wood Hammermill, 24" diameter x 24" width Rotor, 1/2" thick housing, 3.25" shaft diameter, 912 sq.in. screen area, 3600 RPM, 125 HP, 1994

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schutte
Model: 1380
Year: 1994
SCHUTTE 1380 HAMMERMILLApplication: Planer Shavings, Dry Wood Chips, etc.: -- Rotor 24" dia. x 24" wide -- Housing 1/2" thick -- Shaft diameter 3.25" -- Screen area 912 sq.in. -- Shaft ...more

Schutte Buffalo #40-HZF, Hammermill Scrap Grinder, 16' Webster FSM Vibrating Conveyor

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Schutte Buffalo
Model: 40-HZF
Schutte Buffalo Model 40-HZF L.H., 16' Webster FSM Vibrating Conveyor, 460 V/3 Ph.

Get email updates for newly added Hammermills for Wood Processing

Schutte-Buffalo #15300, Vertical Wood Hammermill, Carbon Steel, 44" diameter x 72" width Rotor, 3" width Swinging Hammers, 20700 tip speed, 5040 sq.in. screen, 500 HP, 1785 RPM, 2017

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schutte-Buffalo
Model: 15300
Year: 2017
SCHUTTE-BUFFALO 15 Series, Model 15300 Wood Grinder;Complete with the following components and s: --Carbon Steel Construction. --Rotor approximate 44" diameter x 72" wide. --Approximately ...more

Schutte-Buffalo #1590, Vertical Wood Hammermill, Top feed, bottom discharge, 250 HP, 1800 RPM

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schutte-Buffalo
Model: 1590
SCHUTTE BUFFALO Model 1590 Hammermill;Complete with the folloiwng s: -- Top Feed, Bottom Discharge. -- 250 HP, 1800 RPM, direct drive, electric Motor. -- Factory Frame mounted.

Schutte-Buffalo #AHM-20, Vertical Wood Hammermill, (2) 48" diameter x 24" width Rotors, 600 HP, 200 HP Fan, 2017

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schutte-Buffalo
Model: AHM-20
Year: 2017
Hammermill and Pneumatic System built around a SCHUTTE-BUFFALO Model AHM-20; Complete with the following components and s: --Model AHM-20 Hammermill with (2) approximately 48" diameter x ...more

West Salem Machinery #2852BH, Wood Hammermill/Shredder, 200 HP - 1165 RPM, 52" L x 28" width Infeed opening, feed roll w/ 1-1/2" teeth w/ 6" spacing

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: West Salem Machinery
Model: 2852BH
Year: 1990
WSM 2852BH Heavy Duty Hammermill/Shredder. -- 200 HP - 1,165 RPM motor. -- Infeed opening size is 52" L x 28" W. -- The infeed has a feed roll with 1-1/2" teeth with 6" spacing. -- Has two ...more

Williams #220-HP, Wood Hammermill, 220 HP, 26" x 12" Input Opening, 4" Main Shaft, 3/8" thick swing hammer, 1991

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Williams
Model: 220 HP
Year: 1991
WILLIAMS Hammer Mill, half-round type configuration; s: -- 220 HP Main Drive Motor with Belt Drive complete with Guard. -- 26” x 12” Input Opening. -- Powered Input Pull ...more