back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Wood Veneer Machines

29 Results

Amitec #VT-25-1, 2002

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Amitec
Model: VT-25-1
Year: 2002
The seller has confirmed that these (2) Amitec VT veneer slicers are in good working/running condition. They are ready to load! - (2) Available - Slices log cants in the lengthwise ...more

Amitec VT-25-I, Veneer Slicer, 9-7/8" lumber width, 9-7/8" high cant, 3/8" veneer thickness, 46-1/2" knife length, 36" table height, 2002

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Amitec
Model: VT-25-I
Year: 2002
AMITEC VT-25-I Veneer Slicer;For slicing log cants in the lengthwise direction. : -- 9-7/8" (250 mm) Max. lumber slicing width with an up to 9-7/8" (250 mm) high cant, veneer thickness ...more

Angelo Cremona TZE-4000, Veneer Slicer, 4 m up-stroke, flintch pushers, vacuum table, 1986

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Angelo Cremona
Model: TZE 4000
Year: 1986
ANGELO CREMONA TZE 4000 4 m up-stroke Veneer Slicer with flitch pushers and MERRITT vacuum table.

Cargate D-860, Venner Lathe, 8'-6" L x 5' diameter log, 4" inner spindle, 8" & 11" outer, 5' wheel, 6-knife, 1967

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cargate
Model: D-860
Year: 1967
CARGATE D-860 Rotary Veneer Lathe, Heavy Duty: -- Built specifically to handle large diameter logs as well as small logs. It has a log length capacity of an easy 8'-6" and a diameter ...more

Casati TIO-600, Cross Cut Veneer Guillotine, 23.62" Width capacity, 2.36" cut height, 3 HP power pack for knife, 2010

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Casati
Model: TIO 600
Year: 2010
CASATI TSI/TI0 - 600 Cross-Cut Veneer Clipper. data: -- 600 mm (23.62") Width cap., 60 mm (2.36") cut height, light line indicator for positioning veneer stacks. -- 3 HP power pack for ...more

Get email updates for newly added Wood Veneer Machines

Coe Press Equipment 249D, Rotary Veneer Lathe, 27" log diameter, 110" knife length, 3 to 1 inner drive ratio, 35 cu.m/hr peeling

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Coe Press Equipment
Model: 249D
COE 249D Veneer Lathe with the following: -- 27" maximum log diameter, 110" knife length. -- 1484 Veneer Lathe Big Bar. -- 1390 Veneer Lathe Core drive. -- 3 to 1 inner drive ratio. -- ...more

Coe Press Equipment 263, Lathe, 7" O.D. spindle, 4" I.D. spindle, 48" swing, 56" knife length

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Coe Press Equipment
Model: 263
COE 4 Ft. Veneer Peeling Line with the following major components and s: -- Log cut-off saw. -- Geometric lathe charger. -- Dual spindle 4' COE Model 263 Lathe: &#9679 Diameter of ...more

Cremona 4.3-Meter, Veneer Slicer, 4.3 meters knife length

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cremona
Model: 4.3 METER
CREMONA Veneer Slicer with Vacuum Bed.: -- Knife length 4.3 meters. -- Dismantled carefully and loaded in containers. -- Owner had too much capacity and so this one is for sale now.Please ...more

Diehl VS-81, Tapeless Veneer Splicer, 1/64" thick, 6" min. length, 42" wide, 14 - 75 stitches/min, 85 FPM, 42" throat, 100" x 75" table, 1970

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Diehl
Model: VS-81
Year: 1970
DIEHL VS 81 Tapeless Veneer Splicer; Handles stock from 1/64" thick & 6" min. length up to 42" wide, 14 - 75 stitches/Min.: -- 1.5 HP Variable speed feed motor, 15 - 85 FPM, 42" throat ...more

Fezer A#JAT-21MF, Cross Feed Veneer Splicer, 1987

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Fezer
Model: JAT-21MF
Year: 1987
There are (4) machines at this facility. Two are used in production and the other two are in storage. 87" Capacity.

Hymmen #PAS, veneer sheer

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hymmen
Model: PAS
Hymen Veneer Sheer.

Josting QFS-800, Cross Grain Veneer Clipper

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Josting
Model: QFS-800
JOSTING/KUPER QFS-800 CROSS-GRAIN VENEER CLIPPER. 31-1/2" Max. length cap., 2-3/8" opening, knife cutting operation with electric motor and mechanical linkage, Approx 4 HP motor, pressure ...more

Kuper EMZ-2M, Double End Splicer, 132" opening, 2 mm thickness, 132" working width, 100 FPM, 1995

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kuper
Model: EMZ-2M
Year: 1995
KUPER EMZ-2M.Double-End Splicer, for Cross-Banding the ends of the veneer sheet simultaneously.Reinforces longitudinally spliced veneers by means of a resistant glue thread, which is ...more

Kuper FW-1150, Zig-Zag Veneer Stitcher, 0.188" thickness, 45.25" throat depth, 98 FPM, 59" x 25" table, 1995

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kuper
Model: FW 1150
Year: 1995
Kuper FW 1150 Zig-Zag Veneer Stitcher -- Stitches veneers from 0.4 - 3 mm (0.015" - 0.118") thickness. -- 1.150 mm (45.25") throat depth, variable feed speed from 10 - 30 MPM (33 - 98 FPM) ...more

Kuper FW-1200, Zig-Zag Veneer Stitcher, 0.12" thickness, 47-1/4" throat depth, 164 FPM, 63" x 25" table, 1995

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kuper
Model: FW 1200
Year: 1995
KUPER FW 1200 Zig-Zag Veneer Stitcher. -- Stitches veneers from 0.3 - 3 mm (0.01" - 0.12") thickness, approx. 47-1/4" throat depth, variable feed speed from 10 - 50 MPM (33 - 164 FPM), 0.75 ...more

Kuper FW/Q-1800, Cross Feed Splicer, 0.079" thickness capacity, 74.8" width, 120 FPM taping unit, 75 FPM tansport belt, 1984

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Kuper
Model: FW/Q 1800
Year: 1984
KUPER FW/Q 1800 Lengthwise (Crossfeed) with Zigzag and with PVAC glue Splicer. s: -- "Dual" gluing system, joins veneer edges passing through a "PVAC disk style" glue application zone at ...more

Marunaka RD-8J-Wide, Veneer Roller Dryer, 51" working width, 24' (4 Sec.) dryer length, steam heating, 2003

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Marunaka
Model: RD 8J WIDE
Year: 2003
MARUNAKA Model RD – 8J WIDE Single Deck Veneer Roll Dryer;Complete with the following s: -- 2003 approximate year of manufacture. --Working width – 51” ...more

Marunaka RD-3UB, Veneer Roller Dryer, 39" working width, (3) 3 HP circulating fan, (1) 3 HP exhaust, (7) zones, 250 deg F, 1983

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Marunaka
Model: RD-3UB
Year: 1983
MARUNAKA Model RD-3UB/RD-6UB (Connected) Single Deck Veneer Roll Dryer;Complete with the following s: -- (3) 3 HP circulating fans with (1) 3 HP exhaust blower thru the ceiling. -- Optional ...more

Monguzzi MG-1250, Veneer Splicer, Glue application, longitudinal splicing in 1-pass, 1999

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Monguzzi
Model: MG 1250
Year: 1999
MONGUZZI MG 1250 Veneer Splicer. Veneer Sheet "Face" Assembly includes: Glue application and longitudinal splicing in 1-pass, using an integrated glue applicator. -- During production, the ...more

Monguzzi Pulchra-45-3400, Double Jointer Guillotine w/Gluer Line, 134" cutting length, 31.5" width (discontinuously), 0.059" Strip thickness, 2004

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Monguzzi
Model: PULCHRA 45-3400
Year: 2004
MONGUZZI PULCHRA 45-3400.Double-Knife Jointing Guillotine with integral Glue Applicator on both sides. Fully automatic trimming/jointing, gluing and discharging. One operator can cut and ...more

Raimann ASA-1650, Veneer Patcher, 61" throat capacity, 3 HP gearmotor, (40) plugs/min., 1/32" - 1/5" (soft woods), 1/20" - 3/16" (hard woods), P-34 dies

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Raimann
Model: ASA-1650
Veneer Patcher RAIMANN Model ASA 1650. : -- 61" Throat cap., 3 HP gear motor with new/rebuilt drive unit, strip type mechanical plug-feeder mechanism - cap. of up to (40) plugs/Min.; -- ...more

Ruckle veneer sheer

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Ruckle
Year: 1981
Ruckle single knife with measuring capacity, Capacity cut is 127”, Reconditioned in 2014 never used much, Infeed table included.

Savi HFK-250, Veneer Guillotine, 102.4" Width capacity, 4" daylight opening, 4 HP hydraulic Unit

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Savi
Model: HFK-250
SAVI HFK-250 Veneer Guillotine; : -- 102.4" (2,600 mm) Width cap., 4" daylight opening, hydraulically operated knife, 4 HP Leroy-Somer motror powers hydraulic unit with reservoir. -- ...more

Seybold Saber CKE-S-58-in., Veneer Guillotine, 58" Capacity, 7-1/2 HP V-belt motor drive, Foot pedal operated

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Seybold Saber
Model: CKE-S 58 IN.
Seybold Saber IV Guillotine Model CKE-S58" Capacity, 7-1/2 HP V-belt motor drive, double rod mechanical clutch (Was told there was a problem with the clutch, otherwise the machine operates ...more

Vantec 9' Veneer Auto Stacker

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
The Vantec Veneer Auto Stacker, ELV 1.82B is a Vacuum stacker for 2800 mm Veneer lathe. It is fitted with double stacking system (04 bins), with four veneer transport lines and four 5hp ...more

Vantec 9' Veneer Lathe, designed to process veneer for plywood production

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
The Vantec 2800mm Spindleless Veneer Lathe is designed to process veneer for plywood production from both hard and soft logs. Its metal tempered grooved rollers and lathe knife inclination ...more

Vantec Tension Blade Rotarty Veneer Clipper, to clip 2800 mm veneer sheets into specific sheet sizes

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
The Vantec Automatic Rotary clipper is designed to clip 2800 mm veneer sheets into specific sheet sizes as per the auto stacker preselection. It comes with electronic drive panel, automatic ...more

Fisher+Ruckle AFM-37, Veneer Guillotine, 145.6" Nominal length capacity, 1" - 39" capacity rear fence, 3" (2-3/4" pack of 3/64" thick veneer 70 pcs) insertion thick capacity, 1983

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Model: AFM 37
Year: 1983
FISHER + RUCKLE AFM 37 Veneer Guillotine, Single Knife with 2nd cut. & : -- 3700 mm (145.6") Nominal length cap., motorized rear fence with LED readout, approx 1" - 39" cap. rear fence ...more

Veneer bender

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
150" Roller.