back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Panel Saws

94 Results

Altendorf #TKR-90, Panel Saw, 14" blade with scoring

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Altendorf
Model: TKR-90
Nice Altendorf 12=14" TKR 90 Sliding Table Saw, owner is retiring, 14" blade with scoring 7.5HP Motor 3 Phase.

Altendorf #WA6, Sliding Table Saw, Adjustable Scoring Blade, Single phase - 230 V, 2008

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Altendorf
Model: WA6
Year: 2008
Altendorf WA6 Sliding Table Saw, Adjustable Scoring Blade, Single phase - 230 V, Overhead guard.

Altendorf #WA8 Sliding Table Saw, 7.5 HP, 2019

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Altendorf
Model: WA8
Year: 2019
- Year: 2019, - Electric: 220 Voltage 60 Cycle 3 Phase, - Shipping footprint: 12 (length) x 6 (width) x 5 (height), - Weight: 2,500 lbs, - :, - Pivoting eye-level operating panel, - ...more

Biesse #Selco-WNT6, panel saw line, 78.74"-110.24" x 31.5"-86.61" panel, 1.26" thick, 2021

Machinery Network Inc | Encino, CA | Sales Dept. |
Category: Panel Saws
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Biesse
Model: SELCO-WNT6
Year: 2021
Min. Panel Dimensions 78.74" x 31.5", Max. Panel Dimensions 110.24" x 86.61", Min Thickness.31", Max Thickness 1.26", Max Height of the Stack Being Loaded 19.69", Max. Stack 3.15", 308.647 ...more

Cam-wood TX-E8VX, automatic vertical panel s, 98-1/2" cut length, 2-3/8" cut depth, 12" blade with 1" bore, 5 HP, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: TX-E8VX
Year: 2022
CAM-WOOD TX-E8V Automatic Vertical Panel Saw: -- 98-1/2" Cutting length (cuts vertically top to bottom), adjustable depth of cut up to 2-3/8", 12" blade dia. with 1" dia. bore, single blade ...more

Get email updates for newly added Panel Saws

Cam-wood TX-P10AATX, front load automatic panel, 128" max rip cut, 128" max pull-bak, 10 HP, 1" arbor, 4" depth, 6.3" scoring blade, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: TX-P10AATX
Year: 2022
CAM-WOOD TX-P10AAT FRONT LOAD AUTOMATIC PANEL SAW: -- : 128" (3,250 mm) Max. rip cut cap. & 128" (3,250 mm) max. pull-back front/back; 10 HP (7.45 kW) saw blades motor, 1" dia. ...more

Cam-wood TX-P10AX, Manual Panel Saw, 128" max rip cut, 128" front/back, 10 HP, 1" arbor, 4" max depth, 6.30" scoring blade, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: TX-P10AX
Year: 2022
CAM-WOOD TX-P10A Front-Load Manual Panel Saw: -- 128" Max. rip cut cap. & 128" max. front/back, 10 HP saw blades motor, 1" dia. arbors; -- 4" Max. depth of cut with 355 mm (13.97") dia. ...more

Cam-wood VPS-AP, Vertical Panel Saw, 78-3/4" cutting height with scoring, 161.417" cut lenght, 4 HP, 3.15" scoring blade, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: VPS APL
Year: 2022
CAM-WOOD VPS APL Vertical Saw w/Scoring & Panel Lifting ClampsCapacity: -- Top to Bottom cutting height is 82-1/2" (2,100 mm) without scoring and 78-3/4 (2,000 mm) with scoring; saw ...more

Cam-wood VPS-AV, cnc automatic vertical pan, 78-3/4" cutting height with scoring, 145.66" cut length, 4 HP, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: VPS AV
Year: 2022
CAM-WOOD VPS AV CNC Fully Automatic Vertical Saw w/Scoring & Panel Lifting ClampsPC Control Panel with Software Optimizing Panel Cuts. Automatic Positioning System. The machine ...more

Cam-wood VPS-I, Vertical Panel Saw, 82.677" x 161.417" with scoring, 4 HP, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: VPS I
Year: 2022
CAM-WOOD VPS I Vertical Panel Saw (82.677" x 161.417" w/Scoring)Top to Bottom cutting height is 2,100 mm with or without scoring; saw head w/motor rotates 90 for rip or crosscutting; ...more

Cam-wood VPS-I+, Vertical Panel Saw, 82.677" x 161.417" with scoring, 4 HP, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: VPS I+
Year: 2022
CAM-WOOD VPS I + Vertical Panel Saw (82.677" x 161.417" w/Scoring), Vert-Horz Digital Readouts & Auto Lock System - Delivery from InventoryTop to Bottom cutting height is 2,100 mm with ...more

Cam-wood VPS-I+, Vertical Panel Saw, 76" x 122" with scoring, 4 HP, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: VPS I+
Year: 2022
CAM-WOOD VPS I + Vertical Panel Saw (76" x 122" w/Scoring), Vert-Horz Digital Readouts & Auto Lock SystemTop to Bottom cutting height is 2,000 mm (76") with or without scoring; saw head ...more

Cam-wood VPS-IS, Vertical Panel Saw, 76" x 122" with scoring, 122" cut length, 1-5/8" thickness, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: VPS IS
Year: 2022
CAM-WOOD VPS IS Compact Vertical Panel Saw (76" x 122" w/Scoring) - Delivery from Inventory.Short 10' Frame Compact Model with scoring offers many s in a compact space-saving design. -- ...more

Cam-wood VPS-TWIN, aluminum composite vertica, 78-3/4" x 157-1/2, 4 HP, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: VPS TWIN
Year: 2022
CAM-WOOD - VPS Twin Automatic Vertical Panel Saw, for Cutting & Grooving Aluminum Composites (78-3/4" x 157-1/2")The VPS TWIN is engineered with specific s for cutting or grooving ...more

Cantek #P-508-V, heavy duty planer, 10hp motor, single head, 11-3/4" x 20" capacity, 460 V.

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cantek
Model: P-508-V
Cantek heavy duty planer. 10hp motor, single head, 11-3/4” x 20” capacity., 460v.

Casadei #AXO-85, Panel Saw, 2007

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Casadei
Model: AXO-85
Year: 2007
Casadei AXO 85 Panel Saw, 230V/3PH/60Hz, This saw is ready to be dismantled and go to work!.

Casadei #Linea, Front Load Auto. Panel Saw, 146.9" Cutting length capacity, 10 HP Main & scoring saw, 2.25" Cutting height, 1995

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Casadei
Model: LINEA
Year: 1995
CASADEI LINEA SEZ 4000 FRONT LOAD AUTO PANEL SAW: -- :Unique saw carriage assembly tilts from standard 90 - 45 for single panel miter cutting capabilities.146.9" (3,800 mm) Cutting length ...more

Elcon #185DSX, Panel Saw, 2002

HGR Industrial Surplus | Euclid, OH | Sales Rep. |
Category: Panel Saws
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: Elcon
Model: 185DSX
Year: 2002
1860# 230x45x90, 995# 105x55x48, *contains 2 Pieces.

Gabbiani #Galaxy-T3-110, rear load automatic panel, 177" rip cut, 4.5" saw blade, 10 HP main, 2.4 HP scoring, 2016

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gabbiani
Model: GALAXY T3 110
Year: 2016
GABBIANI Galaxy T3 110 REAR LOAD, AUTOMATIC PANEL SAW: -- :177" (4,500 mm) Overall rip cutting cap.; 4.5" (115 mm) max. saw blade projection; 10 HP (7.5 kW) Main motor w/pneumatic saw blade ...more

Giben #Icon-1-115-3600/3650, Panel Saw, 2013

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Giben
Model: ICON-1-115-3600/3650
Year: 2013
Giben ICON 1 SP 115 Panel Saw, -Saw carriage feed speed: 5-160 m/min (16-525 ft/min)-Saw carriage return speed: 160 m/min (525 ft/min)-Saw carriage traversing vector motor: 8 Nm-Pusher feed ...more

Giben #Icon-Fast-SP-115 Panel Saw, 2016

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Giben
Model: ICON-FAST-SP-115
Year: 2016
Giben ICON Fast SP 115 Panel Saw, -Saw carriage feed speed: 5-30 m/min (16-98 ft/min)-Saw carriage return speed: 130 m/min (426 ft/min)-Saw carriage traversing vector motor: 8 Nm-Pusher ...more

Giben #Matic-HP-SP-90, Panel Saw, 2014

HGR Industrial Surplus | Euclid, OH | Sales Rep. |
Category: Panel Saws
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: Giben
Model: MATIC HP SP 90
Year: 2014
Weight 10,000 Lbs, Year 2014, Located In Mi. If Interested Please Contact The Hgr Brokerage Dept @ 216-238-5767 Or Email Brokerage@hgrinc.com.

Giben #Smart-75-SP, Front Load Auto. Panel Saw, 129" overall cutting length, 2.95" blade projection, 15 HP Main, 1.5 HP scoring, 2004

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Giben
Model: SMART 75 SP
Year: 2004
GIBEN SMART 75 SP CNC Front Load Panel Saw129" (3,300 mm) Overall cutting length, 2.95" (75 mm) max. blade projection. & s: -- 15 HP (11 kW) Main & 1.5 HP (1.1 kW) scoring motor ...more

Giben #Smart-80-SP, Front Loading Panelsaw, 2008

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Giben
Model: SMART-80-SP
Year: 2008

Griggio #SC-1500, sliding table saw, 60" cut travel, 15" wide, 5 HP, 3/4" diameter arbor, 9000 RPM, 45 degree tilt, 16" max blade, 1984

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Griggio
Model: SC 1500
Year: 1984
GRIGGIO SC 1500 Sliding Table Panel Saw -- : 60" Cut travel capacity on a 15" wide anodized sliding table. -- : 5 HP main motor & scoring motor with 3/4" dia. arbor and 9,000 RPM blade ...more

Hendrick #126, woodworking panel saw, 126" cut length, 48" part pusher

Wisconsin Metalworking Machinery | Waukesha, WI | J.R. Kraemer |
Category: Panel Saws
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Hendrick
Model: 126

Hendrick #HPS-102, Overhead Rail Panel Saw, 56" cutting length, 20" blade diameter, 7-1/2" cut depth, 2012

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hendrick
Model: HPS 102
Year: 2012
HENDRICK HPS 102 Overhead Rail Miter Saw (Special Order): -- 56" Max. length of cut, 20" max. blade dia., 7-1/2" max. depth of cut. Complete with: -- Lower link blade guard assembly, 7.5 HP ...more

Hendrick #USA-50-Sinuc, Auto. Panel Saw, 53" cut width, 3" cut height, 14" main blade (3500 RPM), 6" scoring (5000 RPM), 10 HP main, 2003

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hendrick
Model: USA-50 SINUC
Year: 2003
HENDRICK USA-50 SINUC CNC Cross Cut Panel Saw -- : SINUC 3000 Cut Controller; Standard Cut Width: 53"; full 3" cut height for stacking material. -- 14" Main blade (3,500 RPM); 6" scoring ...more

Hendrick Patriot, panel saw

Machnet | Santa Monica, CA | G. Taubman |
Category: Panel Saws
Seller: Machnet
Location: Santa Monica, CA
Mfr: Hendrick Patriot
Hendrick Patriot Woodworking Panel Saw.

Hendricks #Patriot-SRP, panel saw, 126" capacity, 0-130 FPM, 4" blade projection, 1998

D & H Machinery Inc | Toledo, OH | Sales |
Category: Panel Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Hendricks
Model: PATRIOT-SRP
Year: 1998
-Model: Patriot SRP, -Cutting Length & Pull Back Capacity: 3200 mm (126"), -Carriage Travel Speed: 0 - 130 FPM, -Blade Projection: 4", -Volts: 480, -Phase: 3, -Condition: Good.

Holz-Her #1230, Vertical Panel Saw, 2004

Revelation Machinery | Chicago, IL | David |
Category: Panel Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Holz-Her
Model: 1230
Year: 2004

Holz-her #1255, Vertical Panel Saw, Digital Readout

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Holz-Her
Model: 1255
Holz-her 1255 Panel Saw, Digital Readout.

Holz-her #1265S, Vertical Panel Saw, 1996

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Holz-Her
Model: 1265S
Year: 1996
Holzher 1265S Vertical Panel Saw.

Holz-her 1270, automatic vertical panel s, 75" x 169" capacity, 4 HP, 2" cut depth, 8-5/8" saw blade diameter, 1988

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holz-Her
Model: 1270
Year: 1988
HOLZ-HER 1270 SUPERCUT Vertical Panel Saw (Automatic) with Scoring. 75" x 169" Cap., 4 HP motor, 2" depth of cut, 220 mm (8-5/8") dia. saw blade at 6,640 RPM. -- Saw head traverses ...more

Holz-her #6120, Front Loading Panel Saw, 10' cut length, 21.5" multi touch screen, 2015

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Holz-Her
Model: 6120
Year: 2015
Machine :, Saw blade projection: 82 mm, Cutting length: 10 Ft., Sawing unit with 15hp Main Motor, 3hp Scoring Saw, Saw carriage Programmable up to to 70 m/min, 21.5” Multi Touch ...more

Holz-Her #Cut-85, Front Load Auto. Panel Saw, 167" rip capacity, 149" pull back, 3.8" saw blade projection, 15 HP Main, 3 HP scoring, 2006

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holz-Her
Model: CUT 85
Year: 2006
HOLZ-HER CUT 85 FRONT LOAD, AUTOMATIC PANEL SAW: -- :4,250 mm (167") Max. rip cut cap., 3,800 mm (149") pull back pusher stroke; 97 mm (3.8") saw blade projection;15 HP (11 kW) Main saw ...more

Holz-her #Cut-85, Panel Saw, 2004

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Holz-Her
Model: CUT-85
Year: 2004
Holz-her Cut 85 Panel Saw; under power until 8/21, *model 6210.

Holz-Her #Cut-6220, panel saw, 2015

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Holz-Her
Model: CUT-6220
Year: 2015
Holzher 6220 Panel Saw, Ready for immediate removal. Still under power and available for inspection.

Holzma #HKL-380, Angular Panel Saw System, 149.6" Rip capacity 86.6" crosscut capacity, 3.7" saw blade projection, 24 HP main, 3 HP scoring, 2006

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HKL 380
Year: 2006
HOLZMA HKL 380/38/22 Angular Panel Saw System: Angular system capacity 3,800 mm X 2,200 mm with Turning device 0 to 90: -- 149.6" (3,800 mm) Rip and 86.6" (2,200 mm) crosscut cap., 95 mm ...more

Holzma #HKL-430, Angular Panel Saw System, 169" Rip capacity, 86.6" crosscut capacity, 4.9" saw blade projection, 24 HP Main, 3 HP scoring, 2011

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HKL 430
Year: 2011
HOLZMA HKL 430/43/22/R ANGULAR PANEL SAW SYSTEM: -- :169" (4,300 mm) Rip and 86.6" (2,200 mm) crosscut cap., 125 mm (4.9") main saw blade projection;18 kW (24 HP) Main motor, 2.2 kW (3 HP) ...more

Holzma #HPL11-38/160, Panel Saw, Rear Loading, 1999

Revelation Machinery | Chicago, IL | David |
Category: Panel Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Holzma
Model: HPL 11-38/16
Year: 1999
Machine Type:, Cold Saws, Model:, HPL 11- 38/16, Make:, Holzma, Year:, 1999, Cutting length: 3800 mm, Cutting height:125 mm, Length: 6242.0, Width: 10690.0, Height: 2100.0, Weight: 6800 kg ...more

Holzma #HPL-300, Rear Load Auto. Panel Saw, 149.6" Cutting length, 3.2" main blade projection, 18 HP main, 3 HP scoring, 2016

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HPL 300
Year: 2016
HOLZMA HPL 300/38/22 AUTOMATIC REAR LOAD PANEL SAW149.6" (3,800 mm) Cutting length, 3.2" (80 mm) max. main blade projection, 18 HP (13.5 kW) main & 3 HP (2.2 kW) scoring motor.: -- ...more

Holzma HPL-380, rear load automatic panel, 169.2" cut lenght, 3.7" max main blade projection, 24 HP, 2011

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HPL 380
Year: 2011
HOLZMA HPL 380 43/22 PROFILINE REAR LOAD, AUTOMATIC PANEL SAW: -- : 169.2" (4,300 mm) Cutting length, 3.7" (95 mm) max. main blade projection, 24 HP (18 kW) main & 3 HP (2.2 kW) scoring ...more

Holzma #HPL11/43/16, Rear Load Panel Saw, 2002

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Holzma
Model: HPL11/43/16
Year: 2002
HOLZMA”HPL 11-43/16″, Year MFG: 2002, Rigging / Loading:, A Rigger is required to load, Machine Type: REAR LOAD, AUTOMATIC PANEL SAW, Elect./Voltage:, 600 V, 60 Cy, 3 Ph. ...more

Holzma #HPP-300, Auto. Panel Saw, 126" rip cut, 3.74" blade projection, 14.75 HP main, 3 HP scoring, 2014

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HPP 300
Year: 2014
HOLZMA HPP 300 32/32 FRONT LOAD, AUTOMATIC PANEL SAW: -- :126" (3,200 mm) Rip cutting capacity; 3.74" (95 mm) saw blade projection; 14.75 HP (18 kW) main saw motor and 3 HP (2.2 kW) scoring ...more

Holzma HPP-300, front load automatic panel, 169.2" rip cut capacity, 167.3" pusher pull back, 3.1" saw blade projection, 14.75 HP, 2015

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HPP 300
Year: 2015
HOLZMA HPP 300 43/43 FRONT LOAD, AUTOMATIC PANEL SAW: -- :169.2" (4,300 mm) Rip cutting capacity & 167.3" (4,250 mm) pusher pull back; 3.1" (80 mm) saw blade projection; 15 HP (11 kW) ...more

Holzma #HPP-380, front load automatic panel, 126" max rip cut & pull back, 3.74" saw blade, 18 HP main, 3 HP scoring, 2016

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HPP 380
Year: 2016
HOLZMA HPP 380 32/32 FRONT LOAD AUTOMATIC PANEL SAW : -- 126" (3,200 mm) Rip cutting capacity & pull back; 3.74" (95 mm) saw blade projection.18 HP (13.5 kW) Main saw motor and 3 HP ...more

Holzma HPP-81-38, front load horizontal pane, 149" length, 3.3" height, 18 HP main, 3 HP scoring, 229 face plate, 2001

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HPP 81-38
Year: 2001
HOLZMA HPP 81/38-CAD Horizontal Panel Saw - Front Load149" (3,800 mm) Cutting length, 3.3" (85 mm) cutting height, 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor.: -- Variable saw ...more

Holzma #HPP-82-3800, Front Load Auto. Panel Saw, 49" Cutting length, 3.7" cutting height, 18 HP main, 3 HP scoring, 2001

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HPP 82-3800
Year: 2001
HOLZMA HPP 82-3800 FRONT LOAD, AUTO. PANEL SAW: : -- 149" (3,800 mm) Cutting length, 3.7" (95 mm) cutting height, -- 18 HP (13.4 kW) main and 3 HP (2.2 kW) scoring motor. -- Saw ...more

Holzma #HPP200, Panel Saw, 2016

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Holzma
Model: HPP200
Year: 2016
This machine will be available around December 1, 2022., Holzma Optimat HPP200/38/38.

Holzma #Optimat-HPP, 82/3800, Panel Saw, 2001

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Holzma
Model: OPTIMAT-HPP
Year: 2001
This machine is no longer needed at the current facility. It is ready to be removed ASAP. Buyer will have to remove the system., 220 Volt/3 ph.

Holzma #Optimat-HPP-380/31/31, front load automatic panel

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Holzma
Model: OPTIMAT-HPP-380/31/31
Year: 2008
HOLZMA HPP 380 32/32 FRONT LOAD AUTOMATIC PANEL SAW, 126" (3,200 mm) Rip cutting capacity & pull back;, 3.74" (95 mm) saw blade projection., 18 HP (13.5 kW) Main saw motor, 3 HP (2.2 ...more

Homag Optimat #CH-03/32/25, horizontal panel saw, 1996

G-2000 Inc | Toledo, OH | Evan Yoder |
Category: Panel Saws
Seller: G-2000 Inc
Location: Toledo, OH
Mfr: Homag
Model: CH-03/32/25
Year: 1996
, Homag Optimat CH-03/32/25 Horizontal Panel Saw, Machine Type.Woodworking Saws, Panel Manufacturer.HOMAG Model.CH-03/32/25 Year.1996 Condition.Used.

Homag #Espana-C, 03/32/32-plus, Panel Saw, 2001

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Homag
Model: ESPANA-C
Year: 2001
Homag Espana CH-03/32/32-PLUS Panel Saw, Still under power and available for inspection., 230/480 V.

Homag #Sawteq-B-300, Front Load Auto. Panel Saw, 149.6' ' Rip capacity, 145.6' ' Pull back, 3.74' ' saw blade projection, 28 HP Main, 3 HP scoring, 2020

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Homag
Model: SAWTEQ B-300
Year: 2020
HOMAG SAWTEQ B-300 38/38 FRONT LOAD AUTOMATIC PANEL SAW: -- :Working Capacity: 149.6'' (3800 mm) Rip cutting capacity; 145.6'' (3700 mm) Pull back capacity; Main saw blade ...more

LHI RFPR-102/10, multi-blade panel saw, 40 HP arbor, 4-1/4" material thickness, 102" cut width, 12" blade diameter, 33-15/16" arbor, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lhi
Model: RFPR 102/10
Year: 2022
LHI RFPR 102/10 MULTI-BLADE PANEL SAW: with 102" of usable width cutting capacity. : -- (1) 40 HP main arbor motor for 1/8" min. - 4-1/4" max. material thickness; min. panel length 30"; ...more

LHI RFPR-72/10, multi-blade panel saw, 40 HP arbor, 1-1/4" material thickness, 72" cut width, 10" blade diameter, 3-15/16" arbor, 80 FPM, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lhi
Model: RFPR 72/10
Year: 2022
LHI RFPR-72/10 MULTI-BLADE PANEL SAW: : -- 40 HP main arbor motor; 1/8" min. - 1-1/4" max. material thickness; 10" dia blade with 1.25" minimum spacing between the blades; -- 3-15/16" Dia. ...more

LHI RFPR-72/12-HEAVY-DUTY, multi-blade panel saw, 50 Hp arbor, 2" max material thickness, 12" blade diameter, 72" cut width, 3-15/16" arbor, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lhi
Model: RFPR 72/12 HEAVY DUTY
Year: 2022
LHI RFPR 72/12 "HEAVY DUTY" MULTI-BLADE PANEL SAW -- (1) 50 HP main arbor motor for 1/8" min. - 2" max. material thickness; 12" Dia max. blade capacity with 1.25" minimum spacing between ...more

LHI RFPR-72/16-HEAVY-DUTY, multi-blade panel saw, 30 HP arbor, 5" max material thicknes, 16" blade diameter, 72" cut width, 3-15/16" arbor, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Lhi
Model: RFPR 72/16 HEAVY DUTY
Year: 2022
LHI RFPR-72/16 "HEAVY DUTY" MULTI-BLADE PANEL SAW -- (1) 30 HP Main arbor motor for 1" min. - 5" max. material thickness;16" Dia max. blade capacity with 1.25" minimum spacing between the ...more

Lobo #TPS-10C, panel saw, 13 HP, 4800 RPM, pendant Control, safety guarding, 2000

Piselli Enterprises | Statesville, NC | Rich Piselli |
Category: Panel Saws
Seller: Piselli Enterprises
Location: Statesville, NC
Mfr: Lobo
Model: TPS-10C
Year: 2000
LOBO CNC Panel Saw, Model TPS-10C, 3300mm Max length of cut, 80 mm Max depth of cut, 355mm main saw blade Diam. 1" arbor Diam, saw blade speed 4800 RPM, main motor 13 HP, back gauge ...more

Mayer #PS-80, Front Load Auto. Panel Saw, 125.9" Cutting length, 122" pull back, 3.14" saw blade projection, 12 HP main, 320 mm main blade, 30 mm bore diameter, 2013

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mayer
Model: PS 80
Year: 2013
MAYER PS 80 FRONT LOAD, AUTOMATIC PANEL SAW -- :125.9" (3,200 mm) Cutting length & 122" (3,100 mm) pull back, 3.14" (80 mm) max. saw blade projection,12 HP (9 kW) main saw motor, 320 mm ...more

Original 3691-03, Overhead Rail Panel Saw, 20" blade diameter, 7" cut depth, 4" & 6" max thick crosscut, 36" x 60 MDF table, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Original
Model: 3691-03
Year: 2022
ORIGINAL 3691-03 Overhead Rail Panel Saw -- : Sturdy welded steel frame for saw head and beam arm; 7.5 HP motor; 1" dia. arbor; 1-3/8" long arbor; saw head with automatic electro-mechanical ...more

Paul #K34G, Blade Panel Saw, 66.5" Rip width capacity, 120 HP main motor, 4,500 RPM - 50 mm diameter arbor, 3" material thickness, 13.3" min. stock length, 2004

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Paul
Model: K34G
Year: 2004
PAUL K34G-1800 MULTI-BLADE PANEL SAW: -- :66.5" (1,800 mm) Rip width cap., 120 HP (90 kW) main motor, 4,500 RPM - 50 mm dia. arbor,2 - 48 MPM Feed Speed; 3" (85 mm) max. material thickness ...more

Safety Speed MFG 6400, Vertical Panel Saw, 3 HP, 8" blade diamater, 1-3/4" max material thickness, 64" crosscut, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Safety Speed Mfg
Model: 6400
Year: 2022
Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 3 HP Industrial-duty saw motor. -- 8" Blade cap. with 1-3/4" max. material thickness. -- 64" ...more

Safety Speed MFG 6800, Vertical Panel Saw, 3 HP, 8" blade diamater, 1-3/4" max material thickness, 74" crosscut, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Safety Speed Mfg
Model: 6800
Year: 2022
Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 3 HP Worm drive industrial duty saw motor. -- 8" Blade cap. with 1-3/4" max. material ...more

Safety Speed MFG 7000, Vertical panel Saw, 3 HP, 3-phase motor, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Safety Speed Mfg
Model: 7000
Year: 2022
The 7000 vertical panel saw is a high capacity production machine. This heavy-duty saw offers incredible durability and accuracy at a very affordable price. -- Sporting a 3 HP, 3-Ph motor - ...more

Safety Speed MFG 7000, Vertical Panel Saw, 3 HP, 3-phase motor, 64" max vertical cut, 2" max thickness, 8" diameter blade, 2017

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Safety Speed Mfg
Model: 7000
Year: 2017
SAFETY SPEED MFG 7000 M Vertical Panel Saw: -- 3 HP, 3-Ph motor; 64" max. vertical cut; 2" max. thickness; 8" dia. blade. -- The saw carriage rides on two aluminum anodized extruded beams ...more

Safety Speed MFG 7400, Vertical Panel Saw, 2 HP, 8" blade diameter, 2-1/8" max material thickness, 64" crosscut, 120" frame length, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Safety Speed Mfg
Model: 7400
Year: 2022
SAFETY SPEED MFG 7400 Vertical Panel Saw: Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 2 HP single-phase Induction Saw Motor. -- 8" Blade ...more

Safety Speed MFG 7400-XLM, Vertcal Panel Saw, 3 HP, 3-phase motor, 8" blade diamater, 2-1/8" max material thickness, 64" crosscut, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Safety Speed Mfg
Model: 7400-XLM
Year: 2022
Mid-level Vertical for a variety of materials that do not require a 100% chip-free finish. -- 3 HP, 3-phase Motor. -- 8" Blade cap. with 2-1/8" max. material thickness. -- 64" Crosscut ...more

Safety Speed MFG H-5, Vertical Panel Saw, 3.25 HP, 8" saw blade, 1-3/4" max material thickness, 64" crosscut, unlimited rip cut length capacity, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Safety Speed Mfg
Model: H-5
Year: 2022
Entry level Vertical panel saw for cutting a variety of materials, straight & square to 1/32". -- 3.25 HP Industrial Duty saw motor. -- 8" Saw blade cap. with 1-3/4" max. material ...more

Safety Speed MFG SR-5U, panel saw and router combi, 8" blade, 1-3/4" max material thickness, 62" crosscut, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Safety Speed Mfg
Model: SR-5U
Year: 2022
Panel Saw and Router Combination on (1) vertical 10' steel welded frame. -- Can be changed from saw to router in less than a minute and has accuracy of 1/64" straight and square. -- 3 ...more

Schelling #FH-6-430, Rear Load Auto. Panel Saw, 169" Rip capacity, 5.3" saw blade projection, 37 HP - 3800 RPM main, 3 HP - 5500 RPM scoring, 2007

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schelling
Model: FH 6-430
Year: 2007
SCHELLING FH6-430 REAR LOAD, AUTOMATIC PANEL SAW: -- :169" (4,300 mm) Rip Cutting cap.; 5.3" (135 mm) saw blade projection; 37 HP (27 kW) - 3.800 RPM main motor, 3 HP (2.2 kW) - 5,500 RPM ...more

Schelling #FM-430/410, Front Load Auto. Panel Saw, 169" Cutting length, 165.3" pull back, 3.75" saw blade projection; 25 HP - 4100 RPM main, 3.4 HP - 5600 RPM scoring, 2000

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schelling
Model: FM 430/410
Year: 2000
SCHELLING FM-430/410 CNC Front Load Panel Saw & s: 169" (4292 mm) Cutting length & 165.3" (4,200 mm) pull back, 3.75" (95 mm) max. saw blade projection; 25 HP (19 kW) 4,100 RPM main ...more

Schelling #FM-H-330/310, Panel Saw, 127" capacity, w/parts, Manuals (bofm001)

HGR Industrial Surplus | Euclid, OH | Sales Rep. |
Category: Panel Saws
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: Schelling
Model: FM-H 330/310
W/parts, Manuals (bofm001), 8400# 243 X 72 X 85, 1485# 173 X 15 X 13, 925# 136 X 60 X 25, 1610# 100 X 53 X 46, 1030# 153 X 50 X 47, *contains 7 Pieces.

Schelling #FMH580/310, 19' rear-load panel saw, 2005

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Schelling
Model: FMH580/310
Year: 2005
SCHELLING FMH 580/310, 19 FT REAR-LOAD PANEL SAW, (2005), (460/60/3, 30 KW, 32 amp electrics), H-1756, Standard :, - 19', (5800 mm) max. length work piece capacity, - 18", (450 mm) ...more

Schelling #FX-H33-/310, Front Loading Panel Saw, 2004

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Schelling
Model: FX-H33-/310
Year: 2004
FX-H 33-/310 Front Loading Panel Saw.

SCM Sigma #115, panel saw, 1999

D & H Machinery Inc | Toledo, OH | Sales |
Category: Panel Saws
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Scm Sigma
Model: 115
Year: 1999
-Model: 115.

SCMI #Sigma-65, Panel Saw, Dust Collector & Lift Table, 126" Max. rip cut capacity, 126" max. front-to-back, 2001

Machine Central LLC | Denver, CO | Andy Weiss |
Category: Panel Saws
Seller: Machine Central LLC
Location: Denver, CO
Mfr: Scmi
Model: SIGMA-65
Year: 2001
SCMI SIGMA 65 C CNC Panel Saw w/Dust Collector & Lift Table. Very good condition!, 126" Max. rip cut cap., 126" max. front-to-back, 2.55" (65 mm) cutting height; 10 HP main saw motor ...more

Selco #E80, Panel Saw, 2004

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Selco
Model: E80
Year: 2004
Selco EB80 Panel Saw, This machine has already been dismantled and removed from service. It is ready to load., - 2004 Selco EB 80, - Three air flow tables, - 144″ cut line, - Rear ...more

Selco #EB-120, Front Load Auto. Panel Saw, 173" overall cutting length, 169" pull back, 4.8" saw blade projection, 24 HP main, 3.5 HP scoring, 2003

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Selco
Model: EB 120
Year: 2003
SELCO EB 120 FRONT LOAD, AUTO. PANEL SAW: -- :173" (4,400 mm) Overall cutting length & 169" (4,300 mm) pull back, 4.8" (122 mm) max. saw blade projection,Main saw blade projection is ...more

Selco #EB-70, Front Load Auto. Panel Saw, 168" overall cutting length, 2.75" cutting height, 10 HP main, 3 HP scoring, 2004

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Selco
Model: EB 70
Year: 2004
SELCO EB 70-100 Panel Saw,168" (4,300 mm) Overall Cutting Length --: -- 2.75" Cutting height (80 mm saw blade projection), 10 HP main & 3 HP scoring motor; -- Modular roller rear ...more

Selco #EB-70, Panel Saw, 2002

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Selco
Model: EB 70
Year: 2002
Selco EB70 Panel Saw.

Selco #EB-80, Front Load Auto. Panel Saw, 126" overall cutting length/pull-back, 3.1" saw blade projection, 17.5 HP main, 3.6 HP scoring, 2004

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Selco
Model: EB 80
Year: 2004
126" (3,200 mm) Overall cutting length, 126" (3,200 mm) pull-back; 3.1" (80 mm) saw blade projection; 17.5 HP (13 kW) main & 3.6 HP (2.7 kW) scoring motor. -- Variable saw carriage ...more

Selco #EB-80, Front Load Auto. Panel Saw, 151-1/2" overall cutting length, 3.1" saw blade projection, 17.5 HP main, 3.6 HP scoring, 2004

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Selco
Model: EB 80
Year: 2004
SELCO EB 80 FRONT LOAD, AUTOMATIC PANEL SAW: -- 151-1/2" (3,850 mm) Overall cutting length, 3.1" (80 mm) saw blade projection, 17.5 HP (13 kW) main & 3.6 HP (2.7 kW) scoring motor; ...more

Selco #EB-108, Front Loading Panelsaw, 4300x4400mm cutting dim., 6 pneumatic clamps, 2007

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Selco
Model: EB-108
Year: 2007
Model: EB108 Active, cutting dimensions 4300x4400mm, optimization, main motor power 13,5kW, scoring unit motor power 2,2kW, cutting height 107mm, 6 pneumatic clamps, feeding speed ...more

Selco WN-650, Front Load Panel Saw, 177" overall cut length, 4.8" max saw blade, 20 HP main, 3 HP scoring, 2013

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Selco
Model: WN 650
Year: 2013
SELCO "WN 650" FRONTLOAD PANEL SAW, -- 177" (4,500 mm) Overall cutting length, 4.8" (123 mm) max. saw blade projection. 20 HP (15 KW) main & 3 HP (2.2 KW) scoring motor. -- Saw ...more

Selco #WN750, 3800mm cut length, 3200mm pusher stroke, 25 HP, 3 HP scoring, Selco CNC, 2008

Adams Machinery Co | Lake Bluff, IL | Sonneborn |
Category: Panel Saws
Seller: Adams Machinery Co
Location: Lake Bluff, IL
Mfr: Selco
Model: WN750
Year: 2008
Max. Cutting Length 3800mm (149"), Max. Pusher Stroke 3200mm (126"), Max. Saw Blade Projection (5.9"), Max. Gripper Opening (5.3), Height of Work Table (38.7), Main Saw Motor 22 kW (25 HP) ...more

Selco #WNA-600, Angular Panel Saw System, 173.2" Rip capacity, 86" crosscut capacity, 4.8" saw blade projection, 2003

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Selco
Model: WNA 600
Year: 2003
SELCO WNA 600 ANGULAR PANEL SAW with "SHUTTLE SYSTEM" & "POST FORMING": -- :SHUTTLE TABLE Angular Saw with 173.2" (4,400 mm) Rip cap., 86" (2,200 mm) crosscut cap.; 4.8" (122 mm) max. ...more

Selco #WNA-650, Angular Panel Saw, 177" rip, 86" cross-cut, 4.8" saw blade, 24 HP main, 3 HP scoring, 2016

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Selco
Model: WNA 650
Year: 2016
SELCO WNA 650 ANGULAR PANEL SAW + ESSE 2 STACKING/STORAGE SYSTEM; -- :177" (4,500 mm) Rip cap., 86" (2,200 mm) cross-cut cap.; 4.8" (123 mm) max. saw blade projection. -- Rip-cut & ...more

Selco #WNAR6, Angular Panel Saw, 2019

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Selco
Model: WNAR6
Year: 2019
Giben WNAR6 Series Twin Pusher Angular Panel Saw, Cutting length rip cut 3200 mm, Cutting width cross cut 2200 mm, Projection height 95 mm, Lateral loading lift table with direct motorized ...more

Selco WNT-600, rear load automatic panel, 175" overall cut length, 4.8" saw blade projection, 20 HP main, 3 HP scoring motor, 16-492 FPM, 1999

Ex-Factory | Charlotte, NC | Sales Dept. |
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Selco
Model: WNT 600
Year: 1999
SELCO WNT 600 REAR LOAD, AUTOMATIC PANEL SAW: -- :175" (4,450 mm) Overall cutting length, 4.8" (122 mm) max. saw blade projection; 20 HP (15 kW) main & 3 HP (2.2 kW) scoring motor. -- ...more

Selco #WNT610, Rear Load Panel Saw

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Selco
Model: WNT610
Selco WNT 610, Also available: Biesse Winstore.

Spar-tek, Cross Cut Panel Saw

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Spar-Tek Cross Cut Saw
The seller has confirmed that this is in fair working/running condition and it is ready to load!, - Cross cut panel saw.

Striebig #Standard-5192-AH, Vertical Panel Saw, 4300mm x 1920mm x 80mm work area

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Striebig
Model: STANDARD-5192-AH
4300mm x 1920mm x 80mm work area, 4.4 KW 3450 RPM motor, 300mm blade with 30mm arbor, 14'1" rip cut, 6'3"cross cut, 220/440 volt 3 phase.