go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Sawmills

Popular Manufacturers in Sawmills

warning
1 - 50 of 68 listings

Adco West #Canter Sawmill, refurbished, with Keyknife chipping heads including power

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Adco
Model: CANTER
AdcoWest Sawmill Canter, - REFURBISHED, - Keyknife chipping heads including power, - (3) 40 HP Heads and (1) 20 HP (lower head) as specified by head manufacturer, No wiring, switches, set works, or controls included but electric motors present are included., Feed through system as engineered by AdcoWest and operated ...more

Armstrong #Lh-4, Bandsaw Grinder Sharpener

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Armstrong
Model: LH-4
#4 LH Armstrong bandsaw grinder with Digicam. The customer has the Digicam software disk for the grinder.

Baker Dominator #3650E Sawmill, Edmiston Edger, Morbark Chipper, 2013

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: 3650E
Year: 2013
Baker Dominator 3650E Sawmill, Edmiston Edger, Morbark Chipper with diesel engine, All decks and rollers.

Baker #BBR-0 Band Resaw

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: BBR-0
Baker Band Resaw.

Baker #Mini-Scragg, Scragg Mill, 6" diameter x 96" L log, 1" or 1.25" x 14' 2" L blade capacity, (2) 20 HP main, 5 HP feed, 65 FPM, 2023

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: MINI-SCRAGG
Year: 2024
BAKER Mini-Scragg Saw Mill, Accepts logs up to 16" diameter to 8' 0" (96") long and blades adjust to preset width from 3-1/2" to 12" and will accept edge slabs up to 14" across., (2) Main Drive 20 HP "TEFC" motors and a 5 HP variable speed hydraulic feedworks motor; 0 - 65 FPM feed speed. Blade capacity: 1" or ...more

Get email updates for newly added Sawmills

Baker Resaw Tailing Belt

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Brand new.never used.still on the original pallet.

Big Jake Scragg Mill

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Big Jake
Big Jack Scragg Mill.

Big Jake, Complete Scragg Sawmill, prentice load, (2) edgers, all decks & conveyor, chop saw

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Big Jake
The listing is for all equipment at a closed sawmill. Everything is ready to be moved ASAP., - Timberline big Jake scragg, - 48” front saws, - 36” back saws all inserted tooth blades., - 10’ capacity, - 60ft infeed with step loader for mill, - Crosby edger 6x36, - Dead indeed live outfeed ...more

Cantek #HR11P, Horizontal Resaw, Voltage 230/480/3

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cantek
Model: HR11P
Cantek Horizontal Resaw, Voltage 230/480/3.

Cleereman #36, circular sawmill, 100 HP electric engine, left hand

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cleereman
Model: 36
Cleereman #36 Circular Sawmill, 100 HP Electric Engine, Left Hand.

Cleereman #36-Automatic, Circular Left Hand Sawmill and Carriage, 50 HP, (3) Headblocks, (2) shifting saws

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cleereman
Model: 36 AUTOMATIC
CLEEREMAN 36 CIRCULAR LEFT HAND SAWMILL AND CARRIAGE, • Three (3) headblocks with pneumatic dogs and cant kickers, • LEFT HAND, Serial Number 36-669-R99, • Silvatech computerized setworks with controls in sawyer's cab, • Vertical edger with 50 HP electric motor and two (2) shifting saws, • ...more

Cleereman Sawmill Carriage, PawTawJohn setworks and 3D scanner

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cleereman
Cleereman Carriage, PawTawJohn setworks and 3D scanner, Three headblock model LPC-42, Four position dogs in/out and bottom dog turning, Spare cylinders for all positions, Spare top and bottom dogs, 30 hp hydraulics.

Comact #DDM6, Canter sawmill line, double length infeed, 27000 logs/24 hours, 360 FPM (2x6), 500 FPM 2x4

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Comact
Model: DDM6
***Photos coming***, Compact DDM6 Profile Canter Line, Double Length Infeed, Production: 27,000 Logs/ 24 hours, 360 FPM (2x6), 500 FPM 2x4, Infeed belt conveyor, V flight scanning conveyor without the scanner and optimization system, One pass small log processor, Outfeed belt conveyor #1 ...more

Comact/PHL #3 Saw Optimizing Edger

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Comact/phl
Model: 3
Comact/PHL Optimizing Edger.

Comec #RP-900-MVA, Head/Block Resurfacer, 5.2 kW, 220 V, 1999

HGR Industrial Surplus | Euclid, OH
Category: Sawmills
Seller: HGR Industrial Surplus
Location: Euclid, OH
Mfr: Comec
Model: RP 900 MVA
Year: 1999
W/HARDWARE, (2160#) 77X37X75, (85#) 17X14X12, * CONTAINS 2 PIECES.

Cooks 20 Hp Edger, (2) sets of split saws

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cooks
20 HP 230 volt 3 phase, (2) sets of split saws.

Cooper End Dog Scragg Sawmill, complete mill, (2) Infeed Decks, cut off saw, debarker

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cooper
Complete mill that needs to be removed from the current location. Seller will not split up the operation., (2) Infeed Decks:, - (2) 3-Strand Infeed Deck 24' Long, - H82 Chain, - 3-7/16" Shaft, - (2) 10 HP Drives, - 3-Strand infeed deck 60' Long, Cut Off Saw:, - 54" Saw, - 20 HP Motor, - Hourglass rollers, - ...more

Corinth #AL36, Sawmill With Log Turner, 100 HP 3 Phase Motor, Helle Log Turner, infeed table

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Corinth
Model: AL36
100 HP 3 Phase Motor, Helle Log Turner, Infeed Table, Outfeed Table, 25HP Chip Blower.

Corley #44-40, Tong Dog Carriage, 4-heads, 5 HP, 18' long carriage

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Corley
Model: 44-40
Corley 44-40 Tong Dog Carriage, 4-heads, 5 HP motor, 18 foot long carrage, Set works optional (not functional and Corley does not offer spares needed).

Corley, Sawmill & Carriage, 4-strand log deck, log turner, 3 HB carriage

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Corley
Corley 4-strand log deck, Corley 3 HB Carriage with lineal positioning, Brand new (1-year ago) Lewis controls with scanning/setworks, Weight strain 6' band mill headrig, Corley log turner, Corley SMA280 shotgun carriage, Outfeed roll case with stops for cant transfer.

Cornell 42" Gang Edger, 150 HP

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cornell
Cornell 42" Gang Edger, 150 HP Motor (3 years old), (12) Gang Saws (6 new), (7) Moveable Saws (2 new), (24) Various size collars.

Edmiston, 4 Head Block Circular Sawmill, Running daily, 1987

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Edmiston
Year: 1987
Edmiston 4 Head Block Circular Sawmill, Running daily, Won't be available until April.

Frick Sawmill (Parts Machine)

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Frick
Parts machine, log turner, hydraulic power pack, other parts.

Hewsaw #SL250, Trio Chip and Saw line, log positioning devices, conveyors, 2005

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hewsaw
Model: SL250
Year: 2005
HewSaw SL250 Trio sawing line from 2005, This line has already been dismantled and loaded into containers. It is ready to ship!, - Consists of log positioning devices, conveyors, and three sawing machines. HewSaw sawing line is designed to process logs ranging from 100 mm – 420 mm small end diameter, to 550 mm ...more

horizontal machining center #2-Saw, Lumber Trimmer, Left-hand, push button setworks, 16' length capacity, 8" thick cut capacity, No pump unit

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hmc
Model: 2-SAW
HMC 2-Saw Trimmer - Left hand;, Complete with the following components and s:, • Push button Setworks., • 16' length capacity., • Cutting capacity: up to 8 inches thick., • Saws powered with Hydraulic Motors., • Waste Conveyor included., • 120 V Controls., NOTE: No pump unit..

horizontal machining center #2-Saw, Lumber Trimmer, Left-hand, push button setworks, 16' length capacity, 8" thick cut capacity

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Hmc
Model: 2-SAW
HMC 2-Saw Trimmer Model ET-10,;, Complete with the following s:, • 16′ capacity., • Push Button Setworks., • Left hand (feeds from left to right)., • Cuts up to 8″ thick., • Belt Conveyor for waste., NOTE: Removed from service and it was running just fine at the time of removal. ...more

horizontal machining center #AC-40, Sawmill Carriage, Good Condition

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
Model: AC-40
HMC AC-40 Carriage, Good Condition.

horizontal machining center #HD-40, Carriage

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
Model: HD-40
HMC Model HD-40 Carriage Drive, 50 HP Hydraulic Unit.

horizontal machining center Sawmill

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
This mill is ready to be removed from the current location., - 4 Roll Cases 24’’ 2 center 6.5 Diameter 45’ 56’ 62’ 70’HMC All motor controls included, - 7 Lumber Decks Flat Chains 10’ 12’ ...more

horizontal machining center 3 Head Block Carriage, 5x10 Cab with controls

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hmc
HMC Carriage, 5x10 Cab with controls, System is already removed from service and ready to load., Notes from seller:, Carriage is 17'1" longKnee spacing is 63" from 1 to 2, 78" from 2 to 3, 1 to 3 is 141 1/4", Carriage frame is 76 1/2 " wide, Track centers are 62", Track rails are worn out. We used the old track ...more

Hutto Wood Products Trim Saw With Infeed Deck, 6-Head, 2021

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hutto Wood Products
Year: 2021
Trim Saw: 6-Head, System includes: Unscrambler, Infeed Deck, Auto Loader, Control Panel with Color HMI.

IMW #240SS, Dual Head Guide Resurfacer, 2-cutter wheel on one spindle, fully enclosed, 120V

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Imw
Model: 240SS
2 Cutter Wheels on One Spindle, Fully Enclosed, Easy Changeover for Different Saw Guides, 120V.

Jakobsen Stellite Tipper #Jm-2000

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Jakobsen
Model: JM-2000
Complete Jacobsen JM-2000 with Induction Annealer. This unit is completely functional and ready for its next home.

Jakobsen Stellite Tipper #Jm-2000

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Jakobsen
Model: JM-2000
Complete Jacobsen JM-2000 with Induction Annealer. This unit is completely functional and ready for its next home., This unit has been taken out of service but is functional.

Letson & Burpee #6-ft, Bandmill, 6', Pneumatic tilting hood, -Blade lube system, 150 HP

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Letson & Burpee
Model: 6 FT
L&B High Strain 6' Bandmill complete with the following components:, • Motorized top wheel hoist., • Pneumatic tilting hood., • Blade lube system., • 150 HP Electric Motor and V-belts., • New slat bed., • This type is ideal for a left-hand headrig or right-hand resaw operations..

Ligna #8X40, Gang Edger, 40" width x 8" high opening, (5) blades, 125 HP, stacked air cylinder setworks w/ independent shifting on (3 available) blades

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ligna
Model: 8X40
LIGNA 8X40 Multi-Blade Edger/Gang Saw., 40" Wide by 8" high opening., • Bottom saw edger with (5) blades. Powered by a 125 HP TEFC motor., • s stacked air cylinder setworks with independent shifting on (3) blades., • Infeed table with pop-up chains and fence, outfeed rollcase., • Includes: Powered ...more

LM #Bump-Rollcase Package Saw

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Lm
Model: BUMP-ROLLCASE
LM Bump Rollcase Package Saw.

LM #Verticut-2000 Package Saw, 24' infeed deck, 72" saw bar, still under power

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Lm
Model: VERTICUT-2000
Still under power, 24' infeed deck, 72" saw bar.

Mar #5-TON, Log Trailer Loader, 5 Ton, 15 HP crane drive

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mar
Model: 5-TON
Log Truck Trailer Loader;, Complete with the following major components and s:, • 5-Ton capacity cable lifing crane., • 15 HP Crane Drive., • Catwalk., NOTES: ● Dismantled as shown in later photos and ready to load. ● Loading is included in the price. ● LTL load, approximately 20' x ...more

Mcdonough #62-in., Bandmill Wheel, 62" bottom wheel

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mcdonough
Model: 62 IN.
MCDONOUGH Bandmill 62″ Bottom Wheel..

Meadows #8-MBF, Bandmill Sawmill, 15' Long 4 HB Carriage, 4" Band Headrig, 4" combo Edger, 30' x 24" Live Rolls, 33" diameter Log, 6000 to 8000 BF per day, 2001

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Meadows
Model: 8 MBF
Year: 2001
MEADOWS #1 Automatic Sawmill;, Complete with the following components and s:, • 15' Long 4 HB Carriage., • Operator’s Cab,., • Drive & Turner., • Computer Setworks., • YAMANI 4" Band Headrig., • MEADOWS Titan 4" combo Edger also new in 2001;, • 30' x 24" Live ...more

Meadows Portable Sawmill, Computer setworks, 225 HP Detroit Diesel

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Meadows
Meadows sawmill, New parts from MFG: Saw Arbor, Live belt conveyor, misc parts, Computer setworks, 225 HP Detroit Diesel.

Mighty Mite Portable sawmill System mounted on trailer, Perkins diesel engine, 58" chipper

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mighty
Mighty Mite Sawmill mounted on Trailer, 86 Hours on the system, 150 HP Perkins Diesel Engine, Slab drop and take away, 58" Chipper with 24" Infeed Belt, Outfeed Conveyor, Scissor lift for stacking lumber.

Mobile Dimension #127 Sawmill, refurbished and never put back into production

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mobile Dimension
Model: 127
Mobil Dimension Model 127 Sawmill, Unit was refurbished and never put back into production., Options: Log deck chain, saw head raise lower, Includes: (3) New batteries for engine.

Morbark portable circle sawmill, electric vertical gang edger, 42" opening 4 knee carriage

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Morbark
Canadian Morbark Sawmill PLUS, Electric Vertical Gang Edger, Keyknife Headrig Slabber, 42" opening 4 knee carriage, (4) new Headrig blades 60", Modern Set Works, New tires.

Newman #KM16, trimsaw with Infeed

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Newman
Model: KM16
Seller bought this saw with the intention of rebuilding it. He has most of the parts and started the work, but needs the space in the shop immediately. The first few photos are of the machine as it sits now (stripped). The next few show the machine BEFORE they started working on it., Newman KM16 Trim Saw, Unscrambler ...more

Optimatic #Ts-06, Automatic Tooth Straightener, 80mm - 300mm for saw width, .7mm to 2.7mm saw thickness

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Optimatic
Model: TS-06
Optimatic TS-06 Tooth Straightener, Manufacturer :, Every Tooth - Every Run - Every Time, Introducing the TS06 automatic bandsaw tooth straightener., This latest Filing Room innovation from OPTIMATIC is designed to work in place of the backfeed on a bandsaw sharpener. The TS06 is timed from the feed of the bandsaw ...more

Optimil 4-Side Canter Sawmill, 2008

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Optimil
Year: 2008
Optimal 4-Side Canter, See photos fro complete.

Povlsen Wide-Band Sawmill, good working condition, 2000

Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Povlsen
Year: 2000
2000 Povlsen Wide-bandsaw mill. In good working condition, 75hp Isuzu Diesel engine and has approximately 1500hrs on it., Mill can saw logs approximately 36"D x 25' L, Comes with an Armstrong #2 bandsaw sharpener and approximately 20 new bandsaw blades.

Primultini #1100-SFH, Fixed Saw Headrig., 43" Flywheels diameter, 4.5" Flywheels face, 5" blade width, 50 HP, 1975

Ex-Factory | Charlotte, NC
Category: Sawmills
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Primultini
Model: 1100 SFH
Year: 1975
PRIMULTINI - 1100 SFH,.Sawmill with Grinding Equipment, (1) PRIMULTINI Fixed Saw Headrig Model "1100", Flywheels diameter: 1,100 mm (43")., Face of flywheels: 115 mm (4-1/2")., Width of blade: 130 mm (5")., Main motor power: 50 HP., (1) Electric LOG CARRIAGE., (3) Electric centering head blocks., Max. log dia. 700 mm ...more