back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Woodworking Lathes

36 Results

3-1/8" x 11-13/16" Locatelli OMK-300/UF, woodworking lathe, 6-station rotary drum, 5.5 HP, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Locatelli
Model: OMK-300/UF
Year: 2022
11-13/16" Max. between centers, 3-1/8" max. and 5/16" min. stock dia., 5.5 HP spindle motor with 3,020, 4,580 & 6,400 RPM spindle rotation. -- 6-Station Rotary Drum with the following ...more

Mattison #69-42-Matti-Max, Turning Lathe, 10" long turning capacity, 4" x 4" stock size, 20 HP - 2700 RPM cutterhead drive, 2-5/8" arbor diameter

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mattison
Model: 69-42 MATTI-MAX
MATTISON 69-42 MATTI-MAX Heavy Duty Automatic Rotary, high production Turning Lathe.Microprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating ...more

Mattison #69-42-Matti-Max, Rotary Turning Lathe, 42" long turning capacity, with rotating rear arbor, 4" x 4" stock size, 2-5/8" diameter Arbor, 1995

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Mattison
Model: 69-42 MATTI-MAX
Year: 1995
MATTISON 69-42 MATTI-MAX Heavy Duty Automatic Rotary, high production Turning Lathe with Hopper Feed.Microprocessor controlled for quality turnings and ease of setup; 42" long turning cap. ...more

4-3/4" x 47-1/4" Centauro TC-1200, copy lathe, 6" diameter max copy, 2-interchangeable heads, motor protection switch, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Centauro
Model: TC-1200
Year: 2022
CENTAURO TC-1200 Copy Lathe;47-1/4" Max. between centers. -- 4-3/4" Height of centers over bed. -- Max. copy dia. 6" (4-1/8"). -- Max. dia. permitted by traveling steady 3-1/2" (2-1/2"). -- ...more

5-1/2" x 63" Calpe TH5-1600, CNC Multispindle Lathe, 5 spindles V-Type Gouge, automatic loader/unloader, 2001

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Calpe
Model: TH5-1600
Year: 2001
CALPE TH5-1600 Heavy-Duty High-Production, Fully Automatic CNC Lathe: : -- Multi-Spindle cutting simultaneously, (5) spindles using V-type gouge knives. -- 63" (1,600 mm) Max. distance ...more

Get email updates for newly added Woodworking Lathes

5-1/2" x 63" Calpe #TH5-1600, CNC Controlled Lathe - Multispindle, 5-spindle, 2.95" depth cut travel, 50 FPM, 6000 RPM, 10 HP, 2001

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Calpe
Model: TH5-1600
Year: 2001
CALPE TH5-1600 Heavy-Duty High-Production, Fully Automatic CNC Lathe: : -- Multi-Spindle cutting simultaneously, (5) spindles using V-type gouge knives. -- 63" (1,600 mm) Max. distance ...more

6-3/16" x 63" Calpe #L6-1600, Semi-Autmatic Turning Sander, 6-spindle, 1800 spindle/hr., 4 HP - 1800 RPM, 2000

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Calpe
Model: L6-1600
Year: 2000
CALPE L6-1600 Spindle Sander with Hopper Feed. -- (6) Spindles, semi-automatic sanding machine; distance between centers 63", 6-3/16" max sanding diameter, capable of sanding 1800 spindles ...more

12" x 38" General #260, Manual Lathe, 58" bed, 4" bed gap, 2 HP, 2870 RPM, 2002

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: General
Model: 260
Year: 2002
26020 Manual Lathe. -- Data: 38" Max. distance between centers (58" long bed); 12" swing-over bed; approx 2 HP motor, TELEMECANIQUE ALTIVAR 28 Electronic Variable speed speed from 0 - 2,870 ...more

18" x 42" Oliver 2018, woodworking lathe, 200-2400 RPM, 6" front faceplate, 8" rear, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Oliver
Model: 2018
Year: 2022
OLIVER 2018 Wood Turning Lathe;This lathe brings the lathe back to the OLIVER line, in true OLIVER Fashion! -- Starting with a solid, stable cast iron base, legs, bed, tool rest, and ...more

20" x 36" Powermatic #3520C, 2 HP, 1 phase or 3 phase, brand new

Nevins Machinery Concepts Inc | South Easton, MA | Jim Nevins |
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: 3520C
Size (In.) 20, Swing Over Bed (In.) 20, Swing Over Tool Rest Base (In.) 15-3/4, Distance Between Centers (In.) 36 w/dual bearing center, Headstock Movement Full Length of Bed, Spindle Bore ...more

42" x 24" Powermatic #4224B, Lamp Kit, 42x24, Bore 5/8", 230V, 3 phase, 3 HP, 40-3500 RPM

Nevins Machinery Concepts Inc | South Easton, MA | Jim Nevins |
Seller: Nevins Machinery Concepts Inc
Location: South Easton, MA
Mfr: Powermatic
Model: 4224B
Style (Type) Leg Stand, Swing Over Bed (In.) 24, Swing Over Tool Rest Base (In.) 19-1/4, Distance Between Centers (In.) 42, Headstock Movement Full Length of Bed, Spindle Bore 5/8 ...more

Intorex #CX-1600", Automatic Copy Lathe, 74.8" between centers, 5.51" squaring fully automatic hopper feed, 9.45" semi-auto round part diameter, 74.8" semi-auto w/o hopper feed, 1999

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Intorex
Model: CX-1600
Year: 1999
INTOREX CX-1600 Automatic Hydraulic Copy Lathe. : -- Size Capacity: 74.8" (1,900 mm) Max. between centers; fully automatic hopper feeding (hopper auto adjust to change of size) up to 5.51" ...more

Intorex #TX-1600", Fully Automatic Copy Lathe w/PLC Control, 63" between centers, 5.5" squaring automatic, 8.3" dia.semi-auto, 10 HP, 5100 RPM

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Intorex
Model: TX-1600
INTOREX TX-1600 Hydraulic Copy Lathe Hopper Feed. Overall : -- Full automatic, (2) hydraulic copiers, (2) tool holder units, (2) back knives, Hopper Feed, Automatic Loading System. and ...more

Calpe #MH-1800, Hydraulic Copy Lathe, 70-3/4" between centers, 7-3/4" over carriage diameter, 13-3/4" over bed diameter (w/o copier), 6 HP main motor, 2001

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Calpe
Model: MH-1800
Year: 2001
CALPE MH-1800 Hydraulic Copy Lathe. -- Capacity: 70-3/4" (1800 mm) Max. between centers. Max. part dia. over carriage 7-3/4" (200 mm), Max. dia. over bed (without copier) 13-3/4" (350 mm). ...more

Cantek #CP-1250-AP, Auto/Back Knife Copy Lathe, 44" length capacity, with 4" min. stock length, 1/2" - 4" diameter capacity, 2000

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cantek
Model: CP-1250 AP
Year: 2000
CANTEK - GOODSPEED CP-1250 AP Hydraulic Copy Lathe. -- Data: 44" Length cap. with 4" min. length of stock and 1/2" - 4" max. diameter cap., hopper feed with automatic chucking, square or ...more

Centauro #T5E-1600, Automatic Hydraulic Copy Lathe - Electronic, 63" between centers, 8-5/16" over bed H, 5.5 HP main motor, 2000

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Centauro
Model: T5E-1600
Year: 2000
CENTAURO T5E -1600 Semi-Automatic Hydraulic Copy Lathe with (2) Copiers and Tool Sharpener. -- data: 63" (1600 mm) Max. between centers and 8-5/16" height of center over the bed, 5.5 HP ...more

Elio Valeri #Elvap-120, Semi-Automatic Copy Lathe, 48" length capacity, 7" diameter w/o steady rest, 3.93" diameter w/ steady rest, 39 FPM forward, 52 FPM return

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Elio Valeri
Model: ELVAP 120
ELIO VALERI ELVAP 120 Hydraulic Copy Lathe. -- data: 48" max. length cap., 7" max. dia. without steady rest, 3.93" max. dia. with steady rest, and up to 2.5" x 2.5" dia. with steady rest ...more

Frama #TC-1500, Hydraulic Copy Lathe, 6 HP, 12" turning diameter, 59" between center, 30 FPM cross slide, 36 FPM carriage return, 3" stroke, 2005

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Frama
Model: TC-1500
Year: 2005
FRAMA TC-1500 Hydraulic Copy LatheHydraulic copy lathe with (3) different speeds during execution of the work. Possibility of manual or automatic configuration on three intensities: Regular ...more

Goodspeed #CP-168A, Lathe, 27" width capacity, 1/2"-3.9" dia capacity, 10 HP, 1800-3200 RPM, 3 HP

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Goodspeed
Model: CP-168A
Approximately 27" width capacity, 1/2" - 3.9" diameter capacity, 10 HP spindle motor, 1800-3200 spindle speed, 3 HP hydraulic feed, PLC sequence controller.

Goodspeed #FH-30, 3"-41" length capacity, 1"-3" square or round diameter, 15 HP, 2250/3200/3525/4625 RPM, hopper feed

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Goodspeed
Model: FH-30
3" - 41" length capacity, 1" - 3" square or round diameter capacity, 15 HP spindle motor, Spindle speeds 2250, 3200, 3525, 4625 rpm, hopper feed.

Goodspeed / Intorex #TXA-1200, Automatic Copy Lathe, 47-1/4" turning length, 8-1/4" turning diameter, 3.5" turning diameter w/ standard steady, 1998

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Goodspeed / Intorex
Model: TXA-1200
Year: 1998
INTOREX TXA-1200 Automatic Hydraulic Copy Lathe;: -- 1,200 mm (47-1/4") Max. turning length, 210 mm (8-1/4") max. turning diameter. -- Max. turning dia. with standard steady 90 mm (3.5"). ...more

Intorex #TB-1600, Hydraulic Copy Lathe, 63" between centers, 8-5/16" over bed H, 3.5" copying diameter w/ steady rest, 5.5 HP spindle, 1995

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Intorex
Model: TB-1600
Year: 1995
INTOREX TB 1600 Hydraulic Copy Lathe. -- Data: 63" (1600mm) max. between centers and 8-5/16" (210mm) height of center over bed, max. copying dia. of approx. 3.5" (90mm) with standard steady ...more

Intorex #TKC1500, CNC Controlled Lathe/Machining Center, 59.1" max length, 9.1" max diameter, 4.7" max automatic feed, 2019

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Intorex
Model: TKC1500
Year: 2019
INTOREX TKC1500DS 5-Axes CNC Lathe/Machining Center with custom s. With (5) interpolated axes; Automatic front load hopper; Saw Blade for turned sections; Sanding head. With sanding it can ...more

Intorex #TMK-5000, CNC Lathe/Machining Center, 16'-4" length capacity, (8) CNC axes, 24000 RPM, 2009

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Intorex
Model: TMK-5000
Year: 2009
INTOREX TMK-5000.(8) Axes CNC Lathe/Machining Center with ATC.The ultimate combination of Lathe//CNC Machining Center that can machine any turning, symmetrical or asymmetrical as well as ...more

Louis Allis Nuova Scolpitrice #201-16, Multi Spindle Carving Mach., 16-spindle, 8" between spindles, 20" working diameter, 12000 & 18000 RPM, 1985

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: La Nuova Scolpitrice
Model: 201-16
Year: 1985
LA NUOVA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working ...more

Louis Allis Nuova Scolpitrice #201-16, Multi Spindle Carving Mach., (16) cutter stations, 78" workpiece length, 60" carving capacity, 20" working diameter

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: La Nuova Scolpitrice
Model: 201-16
LA NUOVA SCOLPITRICE MultiSpindle Carving Machine. -- Data: (16) Cutter Stations, 78" max. workpiece length, 60" carving cap.; (16) dual carving heads, 7-7/8" between spindles, 20" max. ...more

Locatelli ARIETE-3, automatic turning lathe, 4-3/4" max length, 3-1/8" diameter, max truning, dual speed self-braking mandre, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Locatelli
Model: ARIETE 3
Year: 2022
LOCATELLI ARIETE 3 Automatic Hydraulic Lathe with chuck loader and hydraulically powered centering collet for the production of small turned wooden parts using square section stock (stock ...more

Locatelli #Bigariete, Automatic Hopper Fed Variety Lathe, 4.75" diameter, 6-11/16" length no boring, 4-3/4" w/ boring, 5 HP, 39-3/8" blank piece length, 1986

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Locatelli
Model: BIGARIETE
Year: 1986
LOCATELLI BIGARIETE Hydraulic, Automatic Copy/Variety Lathe;Automatic copy lathe for small wooden parts production;: -- 4.75" (120 mm) max. dia. and 6-11/16" (170 mm) max. length with no ...more

Locatelli MULTIMATIK-SE-CC, woodworking lathe, 1-fixed gouge for cylindering, 2-hydraulic copiers, 110 mm stroke, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Locatelli
Model: MULTIMATIK SE-CC
Year: 2022
LOCATELLI Automatic MULTIMATIK SE/CC,.Copy Lathe: Fully automatic hydraulic Lathe with (1) fixed gouge for cylindering and (2) hydraulic copiers with stroke of 110 mm with very high ...more

Renso Borgonovo Renzo Borgonovo, wood lathe, 18mm spindle diameter, 2006

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Renso Borgonovo
Year: 2006
These machines are in good working condition and can be inspected under power. Designed to produce a wide range of spiralled wood roping in a continuous length. Square stock is fed into the ...more

Schnitzer #2-AXIS, CNC Controlled Wood Lathe, 39.4" max length, 3.94" min length, 6.46" max square, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schnitzer
Model: 2-AXIS
Year: 2022
SCHNITZER ECO CLASSIC 2-Axis 2-Unit CNC Controlled Automatic Lathe. A versatile CNC lathe that allows machining of any symmetrical/concentric parts according your programmed geometry. Made ...more

Torreda Tormadex #PA-1200-E, Hydraulic Copy Lathe, 47" between centers, 9-7/8" diameter w/o traveling steady, 3-1/3" diameter w/ steady rest, 1993

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Torreda Tormadex
Model: PA-1200 E
Year: 1993
TORREDA TORMADEX S.A. PA-1200 Hydraulic Wood Turning Back Knife Lathe:Nicely equipped Spanish lathe with dual hydraulic tracers for making quick work of all your demanding woodturning ...more

Zuckermann #Challenger, Lathe Turning & Sanding Lathe, 149" between centers, 8-13/16" part diameter, 5 HP, 6000 RPM, 1986

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Zuckermann
Model: CHALLENGER
Year: 1986
ZUCKERMANN CHALLEGER Copy Lathe w/Sander for asymmetric/irregular shaped parts.Hopper feed, single spindle; approx 149" (3,800 mm) max. between centers, 8-13/16" (250 mm) max. part dia.; 5 ...more

Zuckermann #Challenger-1700 37-Z-Syncro, Copy Lathe, 67" working length, 9.8" working diameter, 5.5 HP - 6,000 RPM cutter, 1.5 HPsanding, 5-7/8" wide sanding belt

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Zuckermann
Model: CHALLENGER-1700 37-Z-SYNCRO
ZUCKERMANN CHALLENGER 1700 37-Z SYNCHRO Copy Lathe. Single spindle hopper feed CNC Copy Lathe for shaping & sanding asymmetrical parts. -- Size Capacity: 67" Maximum 67" (1700mm) and 4" ...more

Zuckermann #Optima-1200/8/S, Multi Spindle Copy Lathe, 8-spindle, 47.2" copying length, 7.86" working diameter, 5.5 HP - 6000 RPM

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Zuckermann
Model: OPTIMA 1200/8/S
ZUCKERMANN OPTIMA 1200/8/S Copy Lathe with integral sanding.For asymmetrical or symmetrical wood turnings ranging from furniture legs (Queen Anne), gunstocks, guitar necks, to tool handles ...more

Zuckermann #Optima-1200/8/S, Multi Spindle Copy Lathe, 8-spindle, 39.3" copying length, 7.86" working diameter, 5.5 HP - 6000 RPM, 1987

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Zuckermann
Model: OPTIMA 1200/8/S
Year: 1987
ZUCKERMANN OPTIMA-S-8/1000 Copy Lathe with integral sanding.For asymmetrical or symmetrical wood turnings ranging from furniture legs (Queen Anne), gunstocks, guitar necks, to tool handles ...more