Woodworking Presses and Cold Presses

BURKLE 1534-1400 Automatic Pin Press with Membrane, (2) Trays, and Panel Turnover Device. Designed for lamination of pre-shaped and glued panels with PVC & Polypropylene films without the use of a membrane. This configuration allows for cycle times as short as (1-1/2 - 2) Min depending on the 0.3 - 1 mm max. film ...more

CAM-WOOD PT-48HF Feed Trough High Frequency Press, 4' X 8' Feed Through High-Frequency Press, s:, Mass production for wooden boards, 2 to 3 minute for curing a 4' x 8' wooden board, Automatic infeed, outfeed cycle, mass production within 3 - 5 minutes is ready for output., Shortens manufacturing ...more

CAM-WOOD PT-510S3HF Single Table High Frequency, 3-Sided Board Press, Slanted type High Frequency Press with a 5' X 10' capacity, s:, Mass production for wooden boards, 2 to 3 minutes for drying a 4' x 8' or 5' x 10' wooden board, Shortens manufacturing procedures – no need to pass ...more

DEPENDABLE - 203,.Cold Press, 40" x 102" Cap., side loading on 102" side, ● (3) Split upper platens: 34" wide x 40" deep; split platens can be interlocked for single platen operation., ● 45" Max. daylight opening with 12" down stroke hydraulic cylinders., ● (6) Rows of pop-up rollers in machine bed for ...more

HOFER HOP 160 K Hydraulic Door/Veneer Heavy Duty Cold Press, Platen size 63" deep x 98" long, Total Daylight/Opening 32".available. Currently set at about 13" opening. Top platen is hydraulically powered by a 2.2 KW power pack. and has (10 sets) of bolt holes for manual adjustment of daylight opening., (8) 3-1/4" ...more

Operating voltage 220v, 3PH, 43” x 96” capacity on platens, Electric heating, Hydraulic pressure – up-acting cylinders, Free-standing control cabinet, Heat regulators for each platen, Timers, Double palm safety switch.

This Pneumatic Vertical Clamping System s upper and lower 12" wide and up to 126" long steel platens for face gluing a variety of solid wood components. With it's modular design with each section having its own pressure control and 40" opening., 12" Deep x 42" wide clamping cap. Air operated assembly, for face ...more

JLT 78H-16W-42L Mini Air Pod Press, This Pneumatic Vertical Clamping System s upper and lower 16" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With it's modular design with each section having its own pressure control and 40" opening, 16" Deep x 42" long clamping cap. ...more

Automatic MARCH Feed Through Press Line System., Platen dimensions of 1,220 mm x 2,440 mm (4' x 8’); 3 - 40 mm Working thickness; 45-50 panels per hour., Line composed by:, Hydraulic lift table:, Size: 2.500 x 1.200 mm.; capacity: 2.000 kG (4,400 Lbs).; raised height: 1.600 mm.; closed: 350 mm.; 3 kW motor.; ...more

OMECO Feed Through Press, with the following components and s:, • Platen Size: 110” wide x 272" long x 2-3/4 Thick., • 126 wide x 169” long motorized, smooth top Infeed Belt., • (28) Pressing Cylinders., • Approximately 6” daylight opening., • Approx. 126” x 169 Gravity ...more

ORMA - NPC/A 31/16,.Through Feed Hot Press for Panels up to 5' x 10', HYDRAULIC HOT PRESS NPC/A DIGIT 31/16 (5’ x 10’), Working useful size: 3,100 x 1,600 mm, Movable lower platen, (6) Pressing cylinders @ 85 mm dia.; Stroke of cylinders 200 mm, Press opening: 120 mm, Total thrust 120 t, Max. ...more

ORMA OMNIA 25/13 Double Membrane Press., Double membrane press to cover two sided raised panels with veneer or paper in one go. The heating system has two independent electric heaters for themal oil (one for each platen), the quick locking/unlocking flanges are made of special aluminum extruded profiles, granting the ...more

PAGNONI SMARTLINE 4' x 8' Single Opening Melamine Press., Standard Press Line for Short Cycle Lamination of 4' x 8' Particleboard and MDF Panels. This is a complete PLC Controlled Line with material handling. The line consists of the following groups:, Infeed System with Continuous Feed:, Table with ...more

QUICK L-HLPP-2-20-43-8-12.2-Sided Hydraulic Laminating Press:, Number of working sections: (2), Working width, section #1: 6" and 8", Working width, section #2: 8", 10” and 12", Maximum working length: 6,200mm (20.3'), Maximum working height: 1,100mm (43.3"), Pressure at the glue line: Up to 175 PSI, Main ...more

QUICK MACHINERY N-P50 Air Pod style Cold Press., Heavy Duty I-beam construction with machined steel plates for flat smooth pressing surface., Platen pressing area size: 48" x 120" with end loading on 48" side. 50 PSI Platen pressure over the entire surface area with 93 PSI supply air pressure. Pressure is applied by ...more

QUICK MACHINERY N-P80-03-08-EL-1PL-M-40-R-1ZN-P80-03-08-EL-1PL-M-40-R-1Z Air Pod style Cold Press., Heavy Duty I-beam construction with machined steel plates for flat smooth pressing surface. : Platen pressing area size: 38" x 98” with end loading on 37" side. 80 PSI Platen pressure over the entire surface area ...more

QUICK MACHINERY N-P80 Air Pod style Cold Press., Heavy Duty I-beam construction with machined steel plates for flat smooth pressing surface., Platen pressing area size: 62" x 146" with end loading on 62" side. 80 PSI Platen pressure over the entire surface area with 105 PSI supply air pressure. Pressure is applied by ...more

ROSENQUIST - 838 CPP,.Curved Plywood Press, 42" Left-to-right x 36" deep single platen Radio Frequency Press., • 41" Daylight opening with 36" of downward movement; adjustable limit switch controls downward movement., • 15 kW Frequency generator., • Platens have 1-1/2" lip on all (4) sides for attaching ...more

SENNERSKOV Feed Through Hot Press, Platen dimensions: 106" Wide x 154" long, loading on the 106" side, 11-1/2" single daylight., • 4" Thick steel platens suitable for heating by steam, hot water or hot oil with maximum operating temperature of 265 F., • (9) Upstroke press cylinders, with 15 HP hydraulic ...more

BLACK BROTHERS/SHAW ALMEX TF3-4-10. Complete Vacuum 3D Thermoforming Press System., Vacuum Thermoforming Laminating Press, with or without membrane operation; works without hydraulics. Upper Infra-Red bulbs, 350 Watts for accurate heating the film, ideal for three-dimensional laminating and forming of heavy polymers ...more

SHAW ALMEX - TL-4-4-5EL,.Double Table Thermo Laminator - Thermo-Laminating, membrane or membraneless operation for Vinyl & Foil., Technical :, • Constructed with 2-1/2" thick Steel Frame; 52" wide dual tray shuttle infeed for loading-and-unloading, 54" x 69-3/4" aluminum top platen with clamped on membrane. ...more

STETON P85 Hydraulic Cold Press, Single platen hydraulic cold press, • Platen size 1,300 mm X 2,500 mm (51" X 98") Overall platen size, • Side loading on 98" side., • 420 mm (16.5") Max. daylight opening., • Pressure from bottom (6) 3.34" diameter upstroke hydraulic pistons. 2 HP hydraulic pump. 90 ...more

TYLER 804 Air Pod Press;, Overall Platen dimension of 50" x 100", with (4) individually controlled top platens - each 25" X 50"., • Side loading on 100" side., • 0 - 50" Motorized adjustable daylight., • Pneumatic top pressure via 5-1/2" stroke air pods by (32) 8" Air Pods with maximum 50 PSI specific ...more