go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Resaw Band Saws

Popular Manufacturers in Resaw Band Saws

warning
1 - 50 of 61 listings

Baker #A, Band Resaw, 6" cut H x unlimited L, 7" x 7" material, 120 FPM, 28" wheel diameter, 13'-2" L x 1" or 1-1/4" width x 0.035" blade, 20 HP, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: A
Year: 2024
BAKER A Band Resaw, 1/4" to 6" (6 mm-152 mm) cutting height x unlimited lengths; accepts up to 7" x 7" max. incoming material with conveyor set at zero degrees., Fully variable feed speeds from 0 to 120 FPM and controlled by a hydraulic flow control valve; feed speeds relative to width of cut and hardness of material ...more

Baker #A, Horizozntal Band Re-saw, w/Slide return, 7" x 7" timber capacity, 120 FPM, 6" width, 20 HP, 28" diameter band wheel, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: A
Year: 2024
BAKER - A,.Single-Head Resaw w/Slide Return - 7" x 7" Cut Cap., Max. 7" x 7" timber cap. (or 10" x 4" above the blade with conveyor set at zero) w/Slide Return (photo shows powered return); hydraulic variable feed speed rate 0 - 120 FPM 6”-wide, hydraulically-driven powered conveyor with rough top belting. : 20 ...more

Baker #ABXX, Band Resaw, 12" H x 16" width timber, 95 FPM, 40 HP, 28" diameter band wheel, 14'-10" x 1" x 0.035" saw blade, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: ABXX
Year: 2024
BAKER ABXX Single-Head Resaw, 12" x 16" Cut Cap, Single-Head Band Resaw can be used to cut boards, cants, or reclaim slabs, This Resaw can process a Timber up to 12" H x 16 W" in any desired length. Hydraulic variable speed from 0 - 95 FPM. This Model "ABXX" Resaw covers a large range of applications from small to ...more

Baker #BBR-0, Band Resaw, Horizontal, Single Head, 3/4"-7" Cut Width, 1/4"-7" Cut Height, 0.035" x 1" x 13' 2" Blade Length, 0-90 FPM, 20 HP, 1999

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: BBR-0
Year: 1999
BAKER Model BBR-O Single head :, • Separate 20 HP TEFC motor, • Hydraulic feed drive via a 2 HP pump motor, • 0 - 90 FPM variable feed speed., • Endless flat belt infeed w/floating overhead feed rollers, each is hydraulically powered; spring blade tensioning., • 3/4" - 7" Cutting width, 1/4" - ...more

Baker #BX, 2-Head Resaw Band Saw, 12" x 12" cut capacity, 30 HP, 28" diameter band wheel, 120 FPM, 12" width, 14'-2" x 1-1/2" x 0.035" blade (not included), 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: BX
Year: 2024
BAKER BX 2-Head Resaw w/12" x 12" Cut Cap., 30 HP TEFC motor, hydraulically driven feed from head motor, 28” dia. CNC-machined,dynamically balanced, all-steel bandwheels; variable feed speed from 20 - 120 FPM, feed works with 12" wide rough top belt conveyor on self-centering rollers, and holddown wheel. Fixed ...more

Get email updates for newly added Resaw Band Saws

Baker #BX, 4-Head Resaw, 12" capacity, 12" wide x 28' long rubber feed belt

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: BX
Baker 4-Head Resaw Model BX, 12" Capacity, Approx. 12” wide x 28’ long rubber feed belt12” x 12” max material capacity(4) inline bandsaw head units28” diameter bandsaw wheels14½” x 1” x.035 blade capacity(4) 30HP, 230/460v, 3PH motorsHold down roller ...more

Baker #C 4-Head Resaw, return conveyor, hydraulic unit, 2022

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: C
Year: 2022
Baker Model C 4-Head Resaw, Return Conveyor, Hydraulic Unit, Includes: Apprx (20) blades.

Baker #C 4-Head Resaw, return conveyor, cross-over belts, 2019

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: C
Year: 2019
This saw will be ready to ship around May 1, 2024. It has been completely gone through by Baker tech to include: New belts, bearings, hold-downs and re-crowned wheels. First 7-8 photos shown are the machine in the current condition. The remaining photos (and video) are in the previous shop and show the extra conveyors ...more

Baker #C-4-Head, Multi-head Resaw, 6" width x 12" H capacity, 12" width, 13'-2" x 1-1/4" x 0.035" blade, 28" diameter band wheel, (4) 20 HP, 120 FPM, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: C-4 HEAD
Year: 2024
BAKER C 4-HEAD Horizontal Resaw w/Powered Return, 6" Wide x 12" high cap. Resaw; standard spring blade tensioning system;, 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings; quick & easy blade height adjustments. Wheels: 28" Dia. CNC machined, dynamically balanced, all-steel band wheels, (4) bolt ...more

Baker #CX, Horizozntal Band Resaw, 12" H x 12" width, 120 FPM, 30 HP, 28" diameter band wheel, 14'-2" x 1" x 0.035" blade, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: CX
Year: 2024
BAKER CX Resaw, & s:, Single-Head Band Resaw can be used to cut boards, cants, or reclaim slabs. Can process a Timber up to 12" H x 12 W" in any desired length. Hydraulic variable speed from 0 - 120 FPM. Covers a large range of applications from small to large facilities, they are simple to operate and maintain ...more

Baker #CX, 4-Head Resaw Band Saw, 12" H x 12" width, 30 HP, 28" diameter band wheel, 120 FPM, 14'-2" x 1-1/4" x 0.035" blade, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: CX
Year: 2024
BAKER CX 4-Head Re-Saw, The system is perfectly suited for re-sawing squares, and 3-sided cants into various thickness of lumber., Each head powered by it's own 30 HP TEFC motor (40 HP optional), 28" Dia. CNC machined, dynamically balanced, all-steel band wheels with crown., 3-Sided feed works with Rough-top ...more

Baker #D, Grade Lumber Resaw, 40 HP resaw, 16" x 16" cutting capacity, 10 - 60 FPM, 10 HP HPU, 1.25" or 1.5" width x 18' 5" L bandsaws, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: D
Year: 2024
A thin-kerf, narrow band 40 HP resaw with a cutting capacity of 16" x 16" for cutting wide boards or making grade lumber from cants. Many optional configurations available., Infinitely variable feed speed from 10' - 60' fpm, 16" rough-top feed belt and powered holddown with 5" diameter polyolefin wheels. Feed ...more

Baker #D, Resaw with Return conveyor, 16" wide capacity

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: D
Baker Model D Resaw, 16" Wide capacity, Heavy Duty Return Conveyor.

Baker #II-P.A.Q., 2-Head Resaw Band Saw, 20 HP, 6" width x 12" H x 96" L, (2) 28" diameter band wheel, 13'-2" x 1" x 0.035" blade, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: II P.A.Q.
Year: 2024
BAKER II P.A.Q. 2-Head Re-Saw, Each head a separate 20 HP TEFC motor, 3/4" - 6" Cutting width, 1/4" - 12" cutting height, 18" - 96" cutting length. s: (2) 28" Dia. dynamically balanced, all steel band wheel, providing fly-wheel effect while cutting; hydraulic pump, driven from head motor, complete with flow control ...more

Baker #PAQ-II, Band Re-saw, 2-Head, 8" x 12" capacity, (2) 20 HP, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: PAQ II
Year: 2024
BAKER PAQ II Band Re-Saw., 2-Head Re-Saw, 8" x 12" cap., (2) 20 HP motors. : BAKER Octaguide System, moveable sawheads, stationary conveyor belt, rough top belting and infeed hold down wheel. Options available at extra charge: Powered hold-down, BAKER Quik-Sharp band blade sharpener., PRICING SUBJECT TO CONFIRMATION.

Baker 2-Head Resaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Baker 2-Head Resaw.

Baker 3-Head Resaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Baker 3-Head Resaw.

Baker 3-Head Resaw with Turnaround and Conveyor System, 2003

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Year: 2003
Baker BBR-O 3 Head Resaw, Baker BT-O Turnaround, Baker BCS-O Conveyor System, No Green chains included.

Brewco 4-head Resaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Brewco
Model: 4-HEAD RESAW
Brewco 4-Head Resaw, Seller has a hydraulic unit to go with the machine., No controls., Optional: System can be cleaned up and controls added, PER SELLER:, this machine is able to pass 7.75" cants, it was purchased in Nelson BC 20 years ago, it has not run since, it is ready to go but has only on off switches and no ...more

Brewco #B1600, Grade Resaw System, 5-Way Board Separator, Ready to load

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Brewco
Model: B1600
Brewco B1600 Grade Resaw System, 5-Way Board Separator, Ready to load!.

Brewco #BBBH, Resaw Band Saw, 20/5 HP, 8" diameter wheels, 6" wide x 8" high capacity, 21" to 72" length, 3' 2" x 1-14" x 0.035 band

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Brewco
Model: BBBH
BREWCO Model BBBH 6-Head Horizontal Resaw;, Complete with the following s & :, • Working dimensions: 6" Wide x 8" high capacity and length 21" to 72"., • Band: 13'-2" x 1-1/4" x 0.035 Blade provides thin kerf savings. Quick & easy blade height adjustments., • Wheel diameter: 28" Dia., CNC ...more

Brewco #Wolf-400, Resaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Brewco
Model: WOLF-400
This system is no longer needed at the current facility. Ready for immediate removal!, - Brewco Wolf Resaw, - 4" Blade; 20'4" Long, - 40" Bandwheels, - 40 HP Main Motor, - 10 HP Hydraulic Feed, - McDonough Style Guides, - Some spare blades, - Head moves up/down, not the bed, - Approximate dimensions: 9'L x ...more

Brewer #BR-3B8X12R, 3-Head Resaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Brewer
Model: BR-3B8X12R
Brewer 3-Head Resaw, Model # BR-3B8X12R.

Brewer #Single-Head, Resaw Band Saw, 15 HP, 6-1/2" width x 6-1/2" thick capacity, 2-belt drive, 36" working H, 900 RPM, 1-1/4 wide bands

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Brewer
Model: SINGLE HEAD
BREWER Single-head horizontal Re-saw;, With the following s:, • 15 HP motor., • 6-1/2" wide x 6-1/2" thick resaw cap., • 2-belt drive, 36" working height from the floor., • Variable speed hydraulic drive with top and bottom powered tire and belt, 30" dynamically balanced band wheels at 900 RPM for ...more

Brewer, 5-Head Resaw with Return, return belt

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Brewer
Brewer 5-Head Resaw, Return Belt.

Cam-Wood #BX-1212-HR-TNX, Horizozntal Band Resaw, 12" H x 12" width, 90 FPM, 20 HP saw, 28" x 2" band wheel, 201" x 3" blade, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BX-1212-HR-TNX
Year: 2024
CAM-WOOD BX-1212-HR-TNX Two-Head Band Resaw, Can be used to cut boards, cants, or reclaim slabs; max. working height up to 12" H under pressure roller x 12" W; 1/4" - 10-5/8" between blade and conveyor; VFD controlled variable speed from 0 - 90 ft/min., 20 HP Saw Motor, 28" x 2" dynamically balanced cast iron band ...more

Cam-Wood #BX-1212BEEX, Horizozntal Band Resaw, 12" H x 12" width, 80 FPM, 20 HP saw, 28" x 1" band wheel, 168" x 1" blade (not included), 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BX-1212BEEX
Year: 2024
CAM-WOOD BX-1212BEE Single Bottom Head Band Resaw., Can be used to cut boards, cants, or reclaim slabs;, Can process up to 12" H x 12" W; 5/16" - 5-1/4" from blade to conveyor. 2 HP Electric motor controlled variable speed from 12 - 80 FPM. This Model BX-1212BEE is : 20 HP Saw Motor, 28" x 1" band wheels, 168" x 1" ...more

Cam-Wood #BX-1212HR-1X, Horizozntal Band Resaw, 12" H x 12" width, 60 FPM, 20 HP saw, 24" x 2" band wheel, 184" x 1.5" blade (not included), 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BX-1212HR-1X
Year: 2024
CAM-WOOD BX-1212HR-1 Single-Head Band Resaw w/30 Bevel Cutting, Can be used to cut boards, cants, or reclaim slabs;, Max. working height up to 12" H under pressure roller x 12" W; 1/4" - 10-5/8" between blade and conveyor; VFD controlled variable speed from 0 - 60 FPM., 20 HP Saw Motor, 24" x 2" dynamically balanced ...more

Cam-Wood #BX-1616-HR-TNX, Horizozntal Band Resaw, 16" H x 16" width, 90 FPM, 30 HP, 28" x 2" band wheel, 201" x 3" blade (not included), 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BX-1616-HR-TNX
Year: 2024
CAM-WOOD BX-1616HR-TN Two-Head Band Resaw, Can be used to cut boards, cants, or reclaim slabs; max. working height up to 16" H under pressure roller x 16" W; 1/4" - 12" between blade and conveyor; VFD controlled variable speed from 0 - 90 FPM., 30 HP Saw Motor (each head), 28" x 2" dynamically balanced cast iron band ...more

Cam-Wood #BX-1616HRX, Horizozntal Band Resaw, 16" H x 16.5" width, 60 FPM, 30 HP, 32" x 2" band wheel, 230.25" x 4" blade (not included), 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BX-1616HRX
Year: 2024
CAM-WOOD BX-1616HR Single-Head Band Resaw w/Return Conveyor, Can be used to cut boards, cants, or reclaim slabs; max. working height up to 16" under pressure roller x 16-1/2" Widths; 1/4" - 12" between blade and conveyor; VFD controlled variable speed from 0 - 60 ft./min., 30 HP Saw Motor, 32" x 2" dynamically ...more

Cam-Wood #BX-2410HRX, Horizozntal Band Resaw, 10" H x 24" width, 82 FPM, 30 HP, 28" x 2" band wheel, 195-1/2" x 2-1/8" x 3/64" blade (not included), 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: BX-2410HRX
Year: 2024
CAM-WOOD BX-2410HR Single-Head Band Resaw w/30 Bevel Cutting, Can be used to cut boards, cants, or reclaim slabs; max. working height up to 10" H under pressure roller x 24" W; 5/32" - 10" between blade and conveyor; VFD controlled variable speed from 0 - 82 FPM., 30 HP Saw Motor, 28" x 2" dynamically balanced cast ...more

Cantek #HB-800, Band Resaw, 32" wheel diameter, 20 HP, 3.543" Wheel H, 30-5/8" throat, 15-3/8" underguide capacity, 4" width x 217" L blade, 5024 SEPM, 2023

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cantek
Model: HB-800
Year: 2024
CANTEK HB-800 32" Vertical Band Resaw, 32" Wheel diameter, 20 HP motor Vertical Band Saw;, 3.543" (90 mm) wheel width, 30-5/8" throat capacity, 15-3/8" under guide capacity. 4" Blade width X 216- 217-1/8" blade length. 20 HP main motor, generates a blade speed of 5,024 SFPM., s: Heavy fabricated steel machine frame. ...more

Danckaert #44, Vertical Band Resaw, 44" x 5" Bandsaw, 14" cut, 60 & 100 HP, 24' lumber length

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Danckaert
Model: 44
DANCKAERT - 44,.Resaw, Air Strain 44” x 5” Bandsaw., s & :, • McDONOUGH Center Split Feed Works., • Wheel is supported on both sides - not cantilevered., • Pressured guides., • McDONOUGH Infeed Rolls., • Max. Cut: 14”., • New Dynamic brake., • 60 & 100 HP. ...more

Forestor Model 900 Resaw, 4" blade, powered infeed

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Forestor
Model: 900
Forestor 900 Resaw, 4" Blades, Powered Infeed.

Go Fast 5-Head Resaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Go Fast
Go Fast 5-Head Resaw, Unit was cut into two pieces and can be put back together with a weld in the middle., Approx layout is 31' x 8'.

Go Fast Resaw, 2022

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Go Fast
Year: 2022
Go Fast Single Head Resaw.

Go Fast Single Head Resaw, 15 HP Motor, 2023

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Go Fast
Year: 2023
Go Fast Resaw, 15 HP Motor, Put under power to test, never put into production.

High Point 12" Resaw with Return Conveyor

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: High Point
High Point 12" Resaw with Return Conveyor.

Logmaster #LM5 Sawmill, 2" blades, 36" max log diameter, hydraulic log loader, turner, log tapers, 75 HP

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Logmaster
Model: LM5
Logmaster LM5 Sawmill, 2" Blades, 36" Max log diameter, Hydraulic: Log loader, turner, log tapers, 75 HP Electric Motor.

M B D #3648, Automatic Profile Band Saw, 20 HP, 48" x 36" width x 12" H workpiece dims., 8,500 FPM blade, 50-550 IPM, 1/4" - 1-1/4" width x 19' 6" blade, 3PH

Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: M B D
Model: 3648
MBD 3648 AUTOMATIC PROFILE BANDSAW, 20 HP Motor, • Workpiece Length: 48" Maximum and 24" Minimum, 36" Maximum Workpiece Width, and 12" Workpiece Height, • Cast Aluminum Wheels, spring blade tensioning, • Blade Speed: 8,500 FPM, electric mechanical brakes on both wheels., •, • Cutting Speeds: ...more

Mcdonough 54" Resaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mcdonough
McDonough 54" Resaw, Machine was stripped and cleaned, mostly new paint, wheels may need resurfacing (due to sitting).

McDonough 54" Resaw, 44" Band Wheels, 25 HP Motor, 3 Phase, 1943

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mcdonough
Year: 1943
44" Band Wheels, 25 HP Motor, 3 Phase.

McDonough 62" Horizontal Resaw, guides & guide cutter included

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mcdonough
McDonough 62" Horizontal Resaw, Guides and guide cutter included, System is still installed and ready to be removed.

McDonough, 6' Band Mill, Top wheel 1-1/16" thick, bottom wheel 1-1/4" thick

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mcdonough
McDonough 6’ band mill, Air strain band McDonough mill used as a resaw., Top wheel 1-1/16” thick, bottom wheel 1-1/4” thick., 100 hp 1200 rpm motor and drive belts and sheaves available.

ME #R80, Radial Arm Saw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Me
Model: R80
ME R80 14" Radial Arm Saw.

Meber #SR900, Resaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Meber
Model: SR900
Meber SR900 Resaw.

Mereen Johnson #431-DC, Gang Ripsaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Mereen Johnson
Model: 431-DC
Mereen Johnson 431 DC.

Morgan 2-Head Resaw with Return, 6" wide infeed and outfeed belt conveyor

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Morgan
Morgan 2-head Resaw, Return (needs new belt), 460 V/3ph, 6” wide infeed and outfeed belt conveyor (hydraulically driven)., (2) pneumatic hydraulicly driven hold down wheels., Max width cutting capacity: 6” approx., Push button controls., Dual Head design., Each head is powered by a dedicated motor., HP ...more

Northtech #NT-HBR12V, 12" Band Resaw, self contained hydraulic pack

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Northtech
Model: NT-HBR12V
Northtech 12" Resaw, Model NT-HBR12V, Self contained hydraulic pack.

Oliver 36" Vertical Band Resaw

Carolina Machinery Sales | Monroe, NC
Category: Resaw Band Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Oliver
Oliver 36" Band Resaw.