back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Grapples

32 Results

Best International LLC #H4T, Anvil Grapple, 4 Tines, hydraulic, 1 1/2 Yard, 5000 PSI swivel, 2" Cylinder Pins

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Best
Model: H4T
Approximately 1 1/2 Yard, Per Manufartures :, Motor s built in cross over relief, Swivel is Rated at 5000 PSI, 2 Inch Cylinder Pins with Wider bushings and Grease Seals.

Bodine #GR-180, 3-1/8" pin hole diameter, 34-1/8" W, fit Cat 320/325/336 & Komatsu 200/270, (2 available)

RB Enterprises | Flower Mound, TX | Ron Bowlin |
Category: Grapples
Seller: RB Enterprises
Location: Flower Mound, TX
Mfr: Bodine
Model: GR-180
Bodine GR-180 Grapple Rake Two available. Pin Hole Size: 3-1/8in Diameter. Grapple Width: 34-1/8in. This grapple can fit Caterpillar 320, 325, 336 and Komatsu 200, 270.

Caterpillar G310B, Grapple, S/N: L9X00368, 2017

Ziegler Cat - Used | Minneapolis, MN | Sales |
Category: Grapples
Seller: Ziegler Cat - Used
Location: Bloomington, MN
Mfr: Caterpillar
Model: G310B
Year: 2017
367-7524 DEMOLITION & SORTING GRAPPLE G310B-D 312-316 LINK, ROTATING MOTOR, CE PLATE.

Caterpillar G315B, Grapple, S/N: L3S00314, 2013

Ziegler Cat - Used | Minneapolis, MN | Sales |
Category: Grapples
Seller: Ziegler Cat - Used
Location: St Cloud, MN
Mfr: Caterpillar
Model: G315B
Year: 2013
G315B DEMOLITION AND SORTING GRAPPLE 316-325 SIZE MACHINE Current hat is X73965 (316 linkage # 485-6860), can be purchased with or without hat. Other hats available for your ...more

Caterpillar GSH20B 1.25 CYD GRAPPLE, Grapple, S/N: H2K00302, 2014

Milton Cat - Heavy Machinery | Milford, MA | Tim Perkins |
Category: Grapples
Seller: Milton Cat - Heavy Machinery
Location: Batavia, NY
Mfr: Caterpillar
Model: GSH20B 1.25 CYD GRAPPLE
Year: 2014
GSH20B 1.25 CYD ORANGE PEEL GRAPPLE, COMPATIBLE W/25 TO 40 TON CAT & NON-CAT MACHINES, H-LINK.

Get email updates for newly added Grapples

Caterpillar GSH22B GRAPPLE, Grapple, S/N: H1P00167, 2015

Milton Cat - Heavy Machinery | Milford, MA | Tim Perkins |
Category: Grapples
Seller: Milton Cat - Heavy Machinery
Location: Milford, MA
Mfr: Caterpillar
Model: GSH22B GRAPPLE
Year: 2015
NO H LINK, GSH22B 2.50 CYD ORANGE PEEL GRAPPLE, COMPATIBLE W/40 TO 45 TON HEX.

Caterpillar TRS6, Grapple, S/N: A5900320, 2021

Milton Cat - Heavy Machinery | Milford, MA | Tim Perkins |
Category: Grapples
Seller: Milton Cat - Heavy Machinery
Location: Syracuse, NY
Mfr: Caterpillar
Model: TRS6
Year: 2021
TRS6 PART NUMBER 5858423 (PIN ON TOP) S40 BOTTOM WITH GRAPPLE TINES, INCLUDES 585-0454 JUMPER LINES 5850431 WIRING HARNESS, INCLUDES S40 24 HD DIG BUCKET, AND 48 S40 DC/ GRADING BUCKET ...more

Electro Dynamics, hydraulic grapple for scrap handling

Gensco Equipment Co Ltd | Toronto, ON | Sean Abenstein |
Category: Grapples
Seller: Gensco Equipment Co Ltd
Location: Toronto, ON
Mfr: Electro Dynamics
ELECTRO HYDRAULIC GRAPPLE FOR SCRAP HANDLING, Heavy Duty Steel Mill Unit for overhead and port cranes, Capacity: 1 Cubic Yard, 6 Tines / Cylinders, Weighs approx 6400 lbs, 25 HP / 440V ...more

Ellis Fabrications Inc. IT28F, Grapple, S/N: W25SGP1020-96,

Finning Canada | Edmonton, AB | Sales |
Category: Grapples
Seller: Finning Canada
Location: Regina, SK
Mfr: Ellis Fabrications Inc.
Model: IT28F
USED EFI 96" PIPE AND POLE GRAPPLE WITH CATERPILLAR IT LUGGING, QUICK DISCONNECTS, HOSE.

Freightliner #FL70, Grapple truck, Nu-life 8600 lb. grapple boom, 5.9 Cummins diesel engine, 1995

RB Enterprises | Flower Mound, TX | Ron Bowlin |
Category: Grapples
Seller: RB Enterprises
Location: Flower Mound, TX
Mfr: Freightliner
Model: FL70
Year: 1995
1995 Freightliner Grapple Truck, FL70 Grapple, Nu-life 8,600 Lb. Grapple Boom, 5.9 Cummins Diesel Engine, 6-Spd Trans., Recently New Paint, Low Miles, Good tires and Clean cab, Very Good ...more

Gensco #RV1000-5 Tine, grapple, 1-1/4 cu. yards, 4350 psi, 35-40 ton, heavy duty

Gensco Equipment Co Ltd | Toronto, ON | Sean Abenstein |
Category: Grapples
Seller: Gensco Equipment Co Ltd
Location: Toronto, ON
Mfr: Gensco
Model: RV1000-5
(USED) RVG1000 Orange Peel Scrap Grapple, 5 Finger / Tines, Grapple Size: 1-1/4 cu. yard / 1000 Litres, Max PSI: 4350, Weight: 5735 LBS, OIL Flow Grapple Only: 250 L / MIN or 66 Gal/min ...more

GMC #8500, Grapple truck, only 69000 miles, Caterpillar C7 diesel engine, automatic transmission, 2005

RB Enterprises | Flower Mound, TX | Ron Bowlin |
Category: Grapples
Seller: RB Enterprises
Location: Flower Mound, TX
Mfr: Gmc
Model: 8500
Year: 2005
2005 GMC 8500 Grapple Truck, Only 69,000 miles, Truck has a Caterpillar C7 diesel engine, Automatic transmission, Air suspension, 18 ft. Dump bed, Peterson Lightning Loader, Single axle ...more

Hawco #FCH-100-4, 1 yard, orange peel, hydraulic grapple, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hawco
Model: FCH-100-4
APPROXIMATE PER FACTORY LITERATURE:, T-1 alloy steel construction, Heat treated pins and bushings, Replaceable manganese alloy tooth points, 360 degree power rotation, Heavy duty 5,000 psi ...more

Hawco clam shell bucket, 1 yard, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hawco
x.

International #8600, Grapple truck, 132k miles, air suspension, single axle, 2013

RB Enterprises | Flower Mound, TX | Ron Bowlin |
Category: Grapples
Seller: RB Enterprises
Location: Flower Mound, TX
Mfr: International
Model: 8600
Year: 2013
2013 International 8600 Grapple Truck, 132k miles, Air suspension, Single axle, Max Force Diesel engine, 10-speend Eaton Manual Trans, Ramer loader w/extended Boom, 16 long bed, Very clean ...more

Labounty #HDR50, 3 tine hydraulic grapple, never used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Labounty
Model: HDR50
Per Manufacturer's Literature.

Labounty heavy duty hydraulic grapple, 2-tine

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Labounty

Mack #CS300, Grapple truck, Renault 220HP engine, Allison automatic trans, 2000

RB Enterprises | Flower Mound, TX | Ron Bowlin |
Category: Grapples
Seller: RB Enterprises
Location: Flower Mound, TX
Mfr: Mack
Model: CS300
Year: 2000
2000 Mack Grapple Truck, Model CS300, 117k miles, Renault 220HP engine, Allison Automatic Trans, Cab to Axle 175, 246 wheelbase, Single axle, Spring suspension, Peterson tarp, 7,100 lb. ...more

Mack #GU713, Grapple truck, 124k miles, 335HP engine, 243 engine hours, automatic trans, 2009

RB Enterprises | Flower Mound, TX | Ron Bowlin |
Category: Grapples
Seller: RB Enterprises
Location: Flower Mound, TX
Mfr: Mack
Model: GU713
Year: 2009
2009 Mack Grapple Truck, Model GU713, 124k miles, Mack 335HP engine, 243 engine hours, Allison Automatic Trans, Cab to Axle 202", 267" wheelbase, Single axle, Mack Spring suspension ...more

Mega Grab hydraulic grapple magnet combination, 30mg

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Mega Grab
Model 30MG, 50% Duty Cycle, 230 Volt DC, 17 Cold Amps, 24" Magnet.

Pemberton 320 EGR400-3/4-WIDE TINE GRAPPLE B LINKAGE, Grapple, S/N: 928-3-1205C,

Milton Cat - Heavy Machinery | Milford, MA | Tim Perkins |
Category: Grapples
Seller: Milton Cat - Heavy Machinery
Location: Johnston, RI
Mfr: Pemberton
Model: 320 EGR400-3/4-WIDE TINE GRAPPLE B LINKAGE
CE PLATE, COMPATIBLE WITH CAT 320 WITH B LINKAGE, OFFSITE MILTON CAT.

Rockland Inc SG, Grapple, S/N: 9724901, 1999

Gregory Poole Equipment - Mitchell | Raleigh, NC | MITCHELL Oliver |
Category: Grapples
Seller: Gregory Poole Equipment - Mitchell
Location: Raleigh, NC
Mfr: Rockland Inc
Model: SG
Year: 1999

Rotobec 100CHD, Grapple, S/N: 129926-1, 2017

Milton Cat - Heavy Machinery | Milford, MA | Tim Perkins |
Category: Grapples
Seller: Milton Cat - Heavy Machinery
Location: Syracuse, NY
Mfr: Rotobec
Model: 100CHD
Year: 2017
ROTOBEC 100CHD, PASS THROUGH GRAPPLE, NO H LINK, PIN DIAMETER 100MM, SPREAD OF LUG 202MM, COMPATIBLE W/33 TO 50 TON MACHINES.

Rotobec 4552 GRAPPLE, Grapple, S/N: 164172-1-1, 2020

Milton Cat - Heavy Machinery | Milford, MA | Tim Perkins |
Category: Grapples
Seller: Milton Cat - Heavy Machinery
Location: Milford, MA
Mfr: Rotobec
Model: 4552 GRAPPLE
Year: 2020
ROTOBEC 4552HD GRAPPLE W/ 504 ROTATOR, HAS H LINK WITH 80MM PIN AND A CAT B LINKAGE LUG FOR EX MOUNT MEANT FOR 320 WEIGHT CLASS MACHINE..

Rotobec RPA3045B, Grapple, S/N: 108586-1-1, 2014

Carter Machinery - Heavy Machinery | Salem, VA | MATT Walent |
Category: Grapples
Seller: Carter Machinery - Heavy Machinery
Location: Salem, VA
Mfr: Rotobec
Model: RPA3045B
Year: 2014
Unused Rotobec grapple attachment. Fits B Family linkage. RPA3045B BUCKET GRAPPLE W/VALVE B FAMILY BRACKET SN 108586-1-1 RGP1300A-1 ROTATOR , STONE SHELL ...more

Solesbee hydraulic rake grapple, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Solesbee
Model A-SELR-6, Top Clamp Assembly, 2009, Grapple attachment will enable your excavator to do land clearing, demolition and waste recycling., Simple installation - no hydraulics needed. ...more

Weldco Beales 980B, Grapple, S/N: VC075G,

Finning Canada | Edmonton, AB | Sales |
Category: Grapples
Seller: Finning Canada
Location: Regina, SK
Mfr: Weldco Beales
Model: 980B
USED WELDCO MODEL 30 PIN ON GRAPPLE NOT RECONDITIONED - AS IS FITS CAT 980A OR 980B.

Wicker WEL150H, Grapple, S/N: 15665C, 1999

Gregory Poole Equipment - Senter | Raleigh, NC | William Currin |
Category: Grapples
Seller: Gregory Poole Equipment - Senter
Location: Wilmington, NC
Mfr: Wicker
Model: WEL150H
Year: 1999

Caterpillar Work Tools (Serialized) 312 G112B, Grapple, S/N: EG106263,

Michigan Cat | Shelby Township, MI | Sales |
Category: Grapples
Seller: Michigan Cat
Location: Novi, MI
Model: 312 G112B
Year: 1900
MOUNTING, EXCAVATOR.

Grapple, 1 1/4 yard, 5 tine, used

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL

Grapple, 4 Tine Orange Peel

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
4 Tine Orange Peel.

4 Tine grapple, hydraulic rotary motor

Alan Ross Machinery Corp | Zion, IL | Rustin Ross |
Category: Grapples
Seller: Alan Ross Machinery Corp
Location: Zion, IL
4 Tine, Hydraulic Rotary Motor.