Cutoff Saws

Cutting Speed f/s 219.81 242.78 269 Operating Pressure 6÷8 6÷8 6÷8 Dimensions 120" x 56" x 67" Approx. Weight 2,500 lbs. Characteristics U.M 17.71"/ 19.69"/ 21.65" Carbide tipped blade diameter 17.71" / 19.69"/ 21.65" Blade spindle diameter 1.26" / ...more

S:, * 2" TALL X 12" WIDE CUTTING CAPACITY, * 18" SAW BLADE/120 TOOTH BLADE, * LEFT HANDED FEED DIRECTION, * P-PNEUMATIC, * 4X - CUT 4"X4" NON-FERROUS/ALUMINUMN CUTTING OPTION, * 230 V/ 3PH, * 7.5 HP MOTOR, Tiger Stop Advanced Interconnect Kit (AIK) for full automation.

WAGNER MODEL 200 CUTOFF SAW, MANUFACTURER - WAGNER, MODEL NUMBER - 200, YEAR - 1979, TYPE - CIRCULAR COLD SAW, BLADE DIAMETER -8-1/4" OR 12-1/2" BLADE, CURRENT BLADE - 11", CUTTING SPEED -770 TO 1200 FPM, CUTTING CAPACITY - 3-1/8" DIAMETER MAX WORKPIECE, MOTOR - 10 HP, 3600 RPM, ENTRY FEED TABLE WITH END STOP, MAYFRAN ...more

MetlSaw 8” x 36” Fully Automatic Cutoff Saw, Model CS3T8-16, Asset # 14911, Serial # 0537, Cutting Window 36”, Cutting Height 8”, Backgauge Length 16’, Cutting Length Range ½” – Unlimited, Factory Position Tolerance -/+.003, Factory Vertical Squareness -/+.0005” ...more

Table Length 150 inches Saw Travel 24 inches Shuttle Travel 60 inches Blade 10 inches Jaw Opening 5 inches Motor 2.5 HP Electrics 220-440 Volts Overall Dimensions (Approx.) 14' Long x 4' 4" Wide x 5' 6" High, - DRO ON AXIS (72"), - AIR FEED ON CYCLES (HEAD), - HYDRAULIC SHUTTLE, - MAX. CUTTING LENGTH 72" ...more

CTD F 255R Cutoff Saw (Non-Mitering), 12" Blade cap. 90 Cut-Off Saw; 2-1/2" H x 7-1/2" W cut cap. : 2 HP Totally enclosed fan cooled (TEFC) Motor - 3700 RPM, "V" Belt Drive, Two 2" Dust Outlets, Rotating Blade Guards (Blades are NOT included), Non-Mitering, Full Table Base with Chipbreaker. Complete with: 2-Keyed ...more

CTD UCS222 Straight Upcut Saw, & s: 22" Saw blade allowing 1" x 20", 4" x 17", or 8" x 4-1/2" cut cap., Saw blade and arbor assembly traverses up and down on bearing slides, bearing mounts widely spaced for stability. : Pneumatic cycle provides smooth operation from holdown through cutting cycle; full safety ...more

SERIAL. 3552017, MODEL. HDS355A, NEW IN. 2000, DIAMETER OF BLADE. 12", CAPACITY ROUNDS. 4.7", CAPACITY SQUARES. 4" X 4", CAPACITY RECTANGLES. 6.7" X 4", HYDRAULIC CLAMPING. YES, ANGLE HEAD FOR MITER CUTTING. YES, HEAD SWIVELS LEFT. 30 TO 90 DEGREES, HEAD SWIVELS RIGHT. 45 TO 90 DEGREES, SEMI AUTOMATIC CYCLE. YES, 1 ...more

CTD M25RHC Miter Cutoff Saw, • The 200 series saw-head will miter up to 60 on each side of 0; 14" blade cap.;. 5" x 5" material height miter cap.; 3 HP TEFC - 1,725 RPM saw motor, belt driven to saw spindle @ 2,800 RPM., • 1" dia. saw arbor with 3-1/2" saw collar. (2) x 2" dust outlet and scrap chute. ...more

CROSSCUT SOLUTIONS CS14P Pneumatic Upcut Saw, 2" x 8" Cross cut cap.; pneumatically operated cut-off saw; 7-1/2 HP TEFC motor with magnetic starter with 110-volt control voltage; adjustable cycle speed of up to 90 Cy/Min; accepts 18" saw blade (not included - add $250 for 14" saw blade). NOTE: State right or left hand ...more

EISELE 14" CUT OFF SAW WITH VACUUM Price: $2,950 Subcategory: Circular Cold Saws - Metal Blade diameter: 14" Year of Manufacture: 1978 Manufacturer: Eisele Model: LMS-11 Condition: Used, GERMAN MADE PRECISION SAW, 1700 / 3400 RPM, 55 GALLON VACUUM SET UP.

WHIRLWIND 1000 L Upcut Saw, • 2-3/16" x 8-1/4" Cap., 14" blade cap., 3,450 RPM, left-hand unit feeding from right-to-left; (5 - 90) Cycles/Min; 5 HP BALDOR motor., • :, • Magnetic starter with low voltage controls; air filter, regulator, coalescing filter, 4" dust chute..

Abrasive 16" Straight Cut Off Saw #7213 #1, Blade Size: 16", Capacity:, Most Shapes: 5", Solids: 2", Main Motor: 7.5 HP, Straight Cut Only, Dimensions (L x W x H): 60" x 50" x 70", Weight: 500 Lbs..

OMGA T 421 ST Pneumatic Upcut Saw, • 16" Blade cap., 4 HP motor, Crosscutting Saw suitable for cutting a max. of up to 10-5/8" wide x 4-1/2" depth lumber; cuts single or multiple pieces stacked., • Pneumatic adjustable speed up-stroke pneumatically activated through a foot pedal control., • Automatic ...more

LHI Angle Chop Mitering Upcut Saw, Up to 2" x 10" at 90; up to 2" x 8" at 45 Up-Cutting Saw with left-to-right or right-to-left operation (specify when ordering), & s:, Up to 2" x 10" at 90; up to 2" x 8" at 45 Up-Cutting saw. 16" or 18" Dia. blade cap. (with 1" dia. tempered arbor); (5 - 40) cycles/Min. 5 HP ...more

CAM-WOOD CFS-100 Automatic Cut-Off Saw with Defect Marking., Key Advantages:, Ideal Cut-Off Saw for defects, finger joint block, and cut-to-length of cutstock, wood mouldings, flooring, finger joint blocks, paneling, and more!, Machine scans for defects marked with a florescent crayon; allows for high-speed cutting ...more

CAM-WOOD CS-18AAT Programmable Cut Off Saw with 12’ Infeed Capacity, s:, 18" AUTO CUT-OFF SAW AF-08 auto pusher fence for automation, efficiency and accuracy. Also available in 8’ and 16’ incoming lengths. 12' IN-FEED table and 4' out-feed roller table; programmable controller with dual ...more

CROSSCUT SOLUTIONS CS18M Mechanically-operated Cut-off Saw, 2" x 12" Crosscut cap.; 7-1/2 HP TEFC motor with magnetic starter with 110 volt control voltage; standard cycle speed of 133 cycles/Min; accepts 14" saw blade (not included). No compressed air is required which reduces your operating and installation costs. ...more

CROSSCUT SOLUTIONS CS18P2x24 Pneumatic Upcut & Stroke Saw, 2" x 24" Cross cut cap., cutting envelope of 1" x 26"; an overhead pneumatic clamp controlled a solenoid valve that is activated by an electric foot switch. Once clamped, the saw is activated by a double palm buttons with a safety interlock. The saw is ...more

CTD UCS218 Upcut Saw (Pneumatic), The "UCS218" improved design has the blade centered in the table, 15” in from the upper enclosure walls. Now moving up and down on linear rails and bearings. Very precise, with 0.001” run-out on inside flange. Upper Lexan and steel enclosure has sliding doors, with an ...more

WHIRLWIND 212 L Upcut Saw w/Infeed & Outfeed Roller Conveyors, • 4" x 10", 2" x 12" to 1" x 13" Cap., right-to-left operation, 18" dia. blade with 1" bore (not included)., • 10 HP Motor, tempered arbor; (5 - 60) cycles/Min, 1.6 CFM at 90 PSI air requirements., Complete with:, • WHIRLWIND Steel ...more

MODEL SA 142/35, Tilting Range 90-45 degreePneumatic ClampingHydra-Pneumatic Blade FeedEntry and exit roller conveyor, Hytrol.

CAM-WOOD CS-230 OPS High Speed Optimizing Cut Off Saw, Optimizing cut off saw with Outfeed conveyor and (4) sorting kickers, A profitable performer for safe, high speed and high efficiency production., A wide variety of cutting modes to meet your flexible cutting requirements., Lower labor cost and time cost! Increase ...more

CAM-WOOD SC-303-6M-T145 Optimizing Cut-Off Saw With 5.7” Thickness Capacity;, Automatic Cutoff Saw with 22" Blade. Automated Pusher or Stop providing efficiency and accuracy., OPERATIONAL OVERVIEW:, System uses fluorescent crayons to mark waste and grade zones and is incorporated with a fluorescent camera to ...more

Type:Saws, Saws, Abrasive Cut OffManufacturer:KALAMAZOOModel:K20Condition:GoodStock #:802560Status:For Sale.