go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Wood Grinders and Hogs

warning
35 Results

Cam-Wood #WX-1502HX, Horizontal Wood Grinder, 20 HP - 1750 RPM, 15-3/8" x 2-3/8" infeed chute, 8" diameter air discharge, 2023

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: WX-1502HX
Year: 2024
CAM-WOOD WX-1502H Horizontal Grinder, s Impact resistant tooling with excellent wear capability., Horizontal feed, 20 HP - 1,750 RPM drive motor; 15-3/8" x 2-3/8" infeed chute; 8" dia. air ...more

Cam-Wood #WX-1504HCX, Horizontal Wood Grinder, 20 HP - 1750 RPM, 15-3/8" x 4" infeed chute, 8" diameter air discharge, 2023

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: WX-1504HCX
Year: 2024
CAM-WOOD WX-1504HC Horizontal Grinder w/Conveyor, Impact resistant tooling with excellent wear capability., Horizontal feed with (2) 1 HP infeed roller motors; 20 HP - 1,750 RPM drive ...more

Cam-Wood #WX-1510X, Vertical Grinder-Shredder, 10 HP - 1750 RPM, 15" x 11" infeed chute, (6) rotary cutter sets, (2) counter-knives, 2023

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: WX-1510X
Year: 2024
CAM-WOOD WX-1510 Vertical Grinder-Shredder, Impact resistant tooling with excellent wear capability., & s:, Vertical-feed Chute, 10 HP - 1,750 RPM drive motor; 15" x 11" infeed chute; ...more

Cam-Wood #WX-4150X, Vertical Grinder-Shredder, 50 HP - 1750 RPM, 41" x 12" infeed chute, (12) rotary cutter sets, 2023

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: WX-4150X
Year: 2024
CAM-WOOD WX-4150 Vertical Grinder-Shredder, Impact resistant tooling with excellent wear capability., & s:, Vertical-feed Chute, 50 HP - 1,750 RPM drive motor; 41" x 12" infeed chute; ...more

Challenger #CHP200HZF grinder

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Challenger
Model: CHP200HZF
Challenger HZF Grinder, Vibrating infeed WILL NOT include the metal detector.

Get email updates for newly added Wood Grinders and Hogs

Challenger #CHSP400, Pallet Grinder, 2006

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Challenger
Model: CHSP400
Year: 2006
This grinder was removed from service in good working condition. It is ready to load/currently in storage 200 HP Main Motor Cutters 117 F-Cutters Screen (4 ) 22" Diameter Wide with 1-1/2" ...more

Cresswood #HF-40-50, Low Noise Wood Grinder, 66" x 72" Hopper top opening, 42" x 66" bottom opening, 38" Hopper H, (63) Knives @ 102 - 151 RPM

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cresswood
Model: HF-40-50
CRESSWOOD Destroyer HF-40-50 Vertical Hopper Low Noise Grinder, • Approximately 66" x 72" Hopper top opening., • 42" x 66" Hopper bottom opening., • 38" Hopper height. ...more

Hammer Multi Duplex 400lj

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cutler-Hammer
Model: MULTI-DUPLEX-400LJ
Hammer Multi Duplex 400LJ Grinder ready to load!.

Jeffrey #45, Wood Hog, 125 HP, 460 V., 28" x 44" inlet, 7" x 40" outlet, hopper included

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Jeffrey
Model: 45
125 HP, 460 Volt, 28” x 44” inlet, 7” x 40” outlet, hopper included as pictured.

Jeffrey #76-WBH, Wood Hog, 3-lobe, 6-way hammers, 30" x 56" opening, 700 HP, 890 RPM, 1973

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Jeffrey
Model: 76 WBH
Year: 1973
JEFFREY "76 WBH" Wood Hog., • Wood Hog with fixed, 3-lobe, 6-way hammers., • It has a top infeed powered chain with air cylinders that feed a 30" x 56" opening., • s a 700 ...more

Mitts & Merrill #13CSE, Hog Grinder, 300 HP, 15" x 27" feed opening, 18 knives, outboard roller bearings

Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Mitts & Merrill
Model: 13CSE
one(1) used Mitts & Merrill Hog Grinder. Model 13CSE. 15" x 27' feed opening. 18 knives. Discharge screen has.44" diameter holes. outboard roller bearings. Motor: 300 hp, 460 ...more

Montgomery Hog #50, 50" opening

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Montgomery
Model: 50
In good condition. Has 50” opening., No drive motor but would take 100-200HP depending on material being run., No screen included. Very heavy weighs approximately 4 ton.

Montgomery 100 HP Hammer Mill

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Montgomery
Montgomery 100 HP Hammer Mill, Includes: Outfeed conveyor and Infeed Hopper.

Robust #SD-45, Vertical Wood Hog, 20 HP, 150 mm rotor diameter, 140 RPM, 17 (15 + 2) knives, 25.2" x 17" top opening, 2023

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Robust
Model: SD 45
Year: 2024
ROBUST SD 45 Vertical Low Noise Grinder;, The model SD 45 is characterized by low power consumption, high productivity, and ease to use., s:, Universal use (diverse wood, particle boards ...more

Robust #SD-60E, Vertical Wood Hog, 18.5kW, 222 mm cutterhead diameter, 120 RPM, 37" x 22.3" top opening, 2023

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Robust
Model: SD 60E
Year: 2024
ROBUST SD 60E Low Noise Vertical Grinder, s:, One-piece machined cutterhead without welding for increased accuracy in knife fastening., The inserts can be used on their four (4) sides ...more

Robust #SD-70, Vertical Wood Hog, 40 HP, 270 mm rotor diameter, 28 knives, 56.8" x 53" top opening, 5 cubic meter capacity, 2023

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Robust
Model: SD 70
Year: 2024
ROBUST SD 70 Low Noise Vertical Wood Waste Grinder, Basic machine s:, BOVER_BASIC intelligent control system, Power set (electric motor, reduction gear, and belt transmission), Vertical ...more

Rotochopper #MC256, Horizontal Grinder, 3126B 300 Hp CAT Engine, dust control, 2004

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Rotochopper
Model: MC256
Year: 2004
Rotochopper MC256, 3126B 300 Hp CAT Engine, Dust Control, 60 Teeth Roto902 8 row rotor 3/4 x 2 1/4 bolts, 3 button remote-Elec Sol Model EL24VRT, Drive Belt BL10/5V1600, Square D buttons on ...more

Schutte #40-HZF, Horizontal Feed Wood Hog, 75 HP - 3540 RPM, 1-1/4" hammer width, 3-1/4 shaft, 24" diameter x 17-1/2" width Rotor, 22600 tip speed, 3/4" Main chamber

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schutte
Model: 40 HZF
SCHUTTE PULVERIZER COMPANY Model 40 HZF Hammermill;, Complete with the following major components and s:, • Integrated 18", 4,000 CFM Blower., • WEBSTER Horizontal Feeder., • ...more

Schutte #40-HZF, Horizontal Feed Wood Hog, 18" 4000 cfm blower, 16' conveyor, 75 HP - 3540 RPM, 1-1/4" Hammer width

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Schutte
Model: 40 HZF
SCHUTTE PULVERIZER COMPANY Model 40 HZF Hammermill;, Complete with the following major components and s:, • Integrated 18", 4,000 CFM Blower., • WEBSTER 16 Ft. Horizontal ...more

Tooling & Grinding #CS2000, wood hog, 30 HP, hydraulic pusher

McKean Machinery Sales Inc | Brook Park, OH
Seller: McKean Machinery Sales Inc
Location: Brook Park, OH
Mfr: Tooling & Grinding
Model: CS2000
CS2000 30HP WOOD HOG :, -- 27" X 60" CHUTE OPENING -- 24"W CUTTING HEAD -- 230/460 -- HYDRAULIC PUSHER -- NEEDS CONTROL -- WGT: 5,000LBS. PRICE: FOB BROOK PARK, OH - - - $6,950.

Vecoplan #RG52-60U, Grinder Shredder, 2016

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vecoplan
Model: RG52-60U
Year: 2016
Vecoplan RG52-60 U Stretch Slow Speed Grinder, 60 HP Motor, No Control Panel.

Vecoplan 18" Horizontal Grinder, 1997

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vecoplan
Year: 1997
Vecoplan Model 45/12/2VU HZF Grinder, 75 HP Motor, 18" Wide opening, No Vibrating Infeed conveyor.

Vermeer #HG365, Horizontal Grinder, new infeed roll & remote control, 2002

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vermeer
Model: HG365
Year: 2002
Vermeer HG365 Grinder, New infeed roll and remote control, Ready to go to work!.

Vollmer #CABG-50U, Sash Gang Sharpener, works well, 1996

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vollmer
Model: CABG-50U
Year: 1996
Works well, Taken out of service and stored.

Vollmer #FS73F, Grinder

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vollmer
Model: FS73F
Vollmer FS73F Grinder, ready to be moved!.

Weima #WL-4S, wood waste grinder, 23.5" x 31.5" vertical hopper, 1999

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weima
Model: WL-4S
Year: 1999
WEIMA WL-4S Vertical Hopper Fed Low Noise Grinder, with 25,244 Hrs. (As of 10/31/23), with New Bearings & Belts in 2022!, • 23-1/2" x 31-1/2" (600 - 800 mm) Hopper opening at top ...more

Weima #WLB-400, Horizontal Low-Speed Grinder, 15.5" x 2.5" feed opening, 8" diameter Collection outlet, 3/4" screen, (18) cutter knives, 25 HP

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weima
Model: WLB 400
WEIMA WLB 400 Horizontal Low-Speed Grinder, • 25 HP Rotor motor; rotor with (18) 4-way indexable, replaceable cutter knives., s:, • Top infeed roller, 15-1/2" x 2-1/2" feed ...more

Weima #WLB 400, Horizontal Low-Speed Grinder, 15.5" x 2.5" feed opening, 8" diameter Collection outlet, 3/4" screen, (18) 4-way cutter knives, 25 HP, 1999

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weima
Model: WLB 400
Year: 1999
WEIMA WLB 400 Horizontal Low-Speed Grinder, • 25 HP Rotor motor; rotor with (18) 4-way indexable, replaceable cutter knives., s:, • Top infeed roller, 15-1/2" x 2-1/2" feed ...more

Weima #WLH-600 Beaver Horizontal Grinder, 50 HP, vibrating infeed, 2020

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Weima
Model: WLH-600
Year: 2020
2020 Weima WLH 600 Grinder, 50 HP motor, Vibrating Infeed.

Weima #WLK-15, wood waste grinder, vertical hopper fed, single shaft, 59" x59" hopper opening

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weima
Model: WLK-15
WEIMA WLK 15 Vertical Hopper-fed Low Noise Grinder, • Single shaft Shredder/Grinder, 59" x 59" rear-flared hopper opening; 3 cu. yds. cap.; 368 mm (14.5") rotor dia.; 150 HP motor; ...more

Weinig #Rondamat-934 Grinder, 1992

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Weinig
Model: RONDAMAT-934
Year: 1992
Weinig Rondamat 934 Grinder.

Williams Patent Crusher Co, Heavy Duty Hammer Knife Hog, 24 x 42 Feed Opening, 240 HP

Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Williams
24" x 42" Feed Opening?, 250HP Motor, 14 Knives, Hard Faced Rotor, 3Ph/60Hz/460V, Control Panel.

Williams Wood Hog, 100 HP, 230/460 V., 20" x 19" inlet, 9" x 28" outlet, no hopper

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Williams
100 HP, 230/460 volt, 20” x 19” inlet, 9” x 28” outlet, no hopper.

Wood Power, 32", 25 HP Grinder with Furnace, Dentom 624 9500 BTU Furnace

Carolina Machinery Sales | Monroe, NC
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Wood Power
32" Vertical grinder with 25 HP motor, Dentom 624 9500 BTU Furnace, automated measured feed controlled by furnace temperature, Holding tank for feed from the grinder which is automatically ...more