1 - 50 of 92 listings
Armstrong #85, Auto Tip, Automatic Bandsaw Tipping Machine, Set Up For Stellite Tips
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Armstrong
Model: 85
Armstrong #85 Auto Tip, Set Up For Stellite Tips.
Armstrong #85, Auto Tip, Automatic Bandsaw Tipping Machine, Set Up For Stellite Tips
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Armstrong
Model: 85
Armstrong #85 Auto Tip, Automatic Bandsaw Tipping Machine, Set Up For Stellite Tips.
Baker #BSM-0, Stake Pointer, 240 V., 3ph, 1997
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Baker
Model: BSM-0
Year: 1997
1997 Baker BSM-0 Stake Pointer, Fully Functional, Recently Removed From Service, 240V 3 phase.
Baker #Stakemaster, Stake Sharpener, 3000 stakes/hr, (2) 6" diameter x 4.5" L cutter, 2.5" arbor diameter, (2) 7.5 HP, 3" H x 8" width x 96" L material size, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: STAKEMASTER
Year: 2026
BAKER STAKEMASTER Stake Sharpener The StakeMaster is fully automatic. Material is stacked in the hopper. The machine automatically pushes material from the bottom of the stack across the cutters. The Baker StakeMaster is capable of processing up to 24,000 stakes per shift. s: -- Two 7-1/2 -HP saw arbor motors -- ...more
CAE Newnes #26 Bay Bin Sorter, Moore multisaw trimmer, floor chains, unscrambler, stacker
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cae Newnes
Model: 26
CAE Newnes 26 Bay Bin Sorter, Moore Multisaw Trimmer, Floor Chains, Unscrambler, Stacker.
Get email updates for newly added Woodworking - General Machines
Woodworking - General Machines encompass versatile equipment used in woodshops for tasks like cutting, shaping, sanding, and joining wood. Common examples include table saws, band saws, jointers, planers, and drill presses. These machines are essential for crafting furniture, cabinetry, and other wood products. When buying, consider factors such as machine type, precision, durability, and compatibility with your workshop's requirements. Reliable brands and proper maintenance ensure long-term performance.
Cam-Wood #CS-37-AGX2, Stake Sharpener, 2"-3" Angle Cutting Length, 2"-3" Work Thickness, 13-3/4"-37.5" Work Length, 50-70 deg. Arrow Angle, 14" diameter Saw Blade, 5 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-37-AGX2
Year: 2026
CAM-WOOD CS-37-AGX2 Stake SharpenerAutomatic Stake - Pyramid / Arrow - Chisel end point cutting machine with automatic feeding, cutting and out of cycle. Magazine for quick lumber stacking input. Easy set-up operation. : -- Angle Cutting Length 2"; to 3";. -- Working Thickness 2"; to 3";. -- Working Length 13-3/4"; to ...more
Cam-Wood #CS-48-AGX2, Stake Sharpener, 4" Angle Cutting Length, 3" Thickness Capacity, 230 V., 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-48-AGX2
Year: 2026
CAM-WOOD CS-48-AGX2 Stake SharpenerAutomatic Stake - Pyramid / Arrow - Chisel end point cutting machine with automatic feeding, cutting and out of cycle. Magazine for quick lumber stacking input. Easy set-up operation. : -- Angle Cutting Length 2"; to 4";. -- Working Thickness 3/4"; to 3";. -- Working Length 13-3/4"; ...more
Cam-Wood #Set-402TS-N, Double End Notcher, 24"-49" L x 0.75"-4" thickness Work capacity, 1.25" Cutter diameter, 4" Stroke, (2) 5 HP Motor, 6000 RPM, 2026
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: SET-402TS-N
Year: 2026
CAM-WOOD SET-402TS-N Double End NotcherDouble end notchine machine for pallet components: -- Working Length: 24" to 49" -- Working Thickness: 3/4" to 4" -- Pneumatic Hold Down x 4 units (2 sets at Top & 2 set at Bottom) -- Notch Cutter Speed 6,000 rpm -- Notch Cutter Stroke 4" -- Notch Cutter Diameter 1-1/4" -- ...more
Caterpillar #966K, 966H & 972K & 972H, sorting log grapple forks
Machinery Scene | Toledo, WA
Category: Woodworking - General Machines
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Caterpillar
Model: 966K
Caterpillar 966K, 966H & 972K & 972H sorting log grapple forks, wheel loader log grapple, needs repair/needs cylinders and pins, 99” wide, 84” deep, 78” tall- no pallet, Weight estimate: 6,500 LBS, contact us for additional photos, shipping cost and price.
Cefla #Rotostain-2000, 2005
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cefla
Model: ROTOSTAIN-2000
Year: 2005
Cefla Rotostain 2000.
Celleco Cleanpac 350 #2HL-28, centrifugal cleaning bank
Lenmark Industries | Langley, BC
Category: Woodworking - General Machines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Celleco
Model: 2HL28
SKU: 123648, Model: 2HL28, Condition: Used, Additional :, No. of Banks: 28.
Celleco Cleanpac 350 #4H-64, centrifugal cleaning bank
Lenmark Industries | Langley, BC
Category: Woodworking - General Machines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Celleco
Model: 4H-64
SKU: 123650, Model: 4H-64, Condition: Used, Additional :, No. of Banks: 64.
Celleco Cleanpac 350 #4H-72, centrifugal cleaning bank
Lenmark Industries | Langley, BC
Category: Woodworking - General Machines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Celleco
Model: 4H-72
SKU: 123652, Model: 4H-72, Condition: Used, Additional :, No. of Banks: 72.
Celleco Cleanpac 350 #4H-72, centrifugal cleaning bank
Lenmark Industries | Langley, BC
Category: Woodworking - General Machines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Celleco
Model: 4H-72
SKU: 123651, Model: 4H-72, Condition: Used, Additional :, No. of Banks: 72.
Charly Template Maker For grinding your own Molder knives
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Charly
7.5 HP 230 volt 3phase, 2 sets of fabric upper bags.
Charly Template Maker For Grinders
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Charly
Automatic template Maker for grinding your own Molder knives.
Dahao Face Frame Clamp, 156" L x 60" W x 80" H, (3) vertical pneumatic Clamping bars
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dahao
156" long x 60" wide x 80" high, (3) vertical pneumatic Clamping bars, (7) clamps that can be placed horizontal or vertical on perforated surface.
Denray #" 9600, down draft table, 48" x 96 x 36" H table, tube filtration system, 4 swivel casters, 2 that lock, 3 HP, 2026
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Denray
Model: 9600
Year: 2026
DENRAY 9600 Down Draft Sanding Table: Extra long 48" x 96" table with a 36" working height. -- Rated at 4,300 CFM with 3 HP motor. -- This model s the Tube Filtration System which cleans with a 99% capture rate at 1 micron. -- Includes: (4) Swivel casters, including (2) that lock in place. -- No duct work, no loss of ...more
Denray #2800, down draft table, 28" x 48" x 36" H table, 2800 cfm, 1" static with 1-1/2 HP, 4 4" swivel casters, 2 that lock, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Denray
Model: 2800
Year: 2026
DENRAY 2800 Down Draft TableConvenient size 28" x 48" table. -- 2,800 CFM Rating at 1" static with 1-1/2 HP motor. -- Space-saving self-contained unit with no ductwork and no loss of conditioned air. Tube filter system cleans with 99% capture rate at 1 micron. -- Comfortable 36" working height. -- 1-1/8" Thick ...more
Denray #2872, down draft table, 28" x 72" x 34-1/2 H table, 2 HP, 77 dba sound level, 4 casters, 2 of which lock in place, 115 volts, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Denray
Model: 2872
Year: 2026
DENRAY 2872 Down Draft TableLarge work surface on this 28" x 72" table (overall). -- Rated at 3,400 CFM, with 2 HP motor and magnetic starter. -- Space-saving self-contained unit w/built-in dust drawer. -- s; New Tube Filtration System which cleans with a 99% capture rate at 1 micron. -- Quiet operation at only 77 dBA ...more
Denray #2872-B, Down Draft Table, 28" x 72" table, 3000 cfm, 2 HP, cartridge filters w/ 180 sq.ft. cloth area, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Denray
Model: 2872-B
Year: 2026
DENRAY 2872 B Down Draft Sanding TableThis model is great for medium sized jobs, and can be used for plastics, woods and finishing materials. The 2872B comes with 80/20 cartridge filters which clean with a 99.95% capture rate at.5 micron. This model comes standard with Denray's "Jet Pulse" push-button cleaning ...more
Denray #3660-B, down draft sanding table, 36" x 60" x 36" H table, 2 HP, 3-phase motor, 74 dba, rubberized surface, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Denray
Model: 3660-B
Year: 2026
DENRAY 3660B Down Draft Sanding TableConvenient 36" x 60" table with a 36" working height with DENRAY's Pulse jet Cleaning System. -- Rated at 3,400 CFM for fast, easy removal of dust. -- 2 HP 3-phase motor. -- Space-saving self-contained, double filtration unit with integrated table top surface filter and bottom ...more
Denray #3672 B, down draft sanding table, 36" x 72" x 36" H table, 2 HP, 3-Phase motor with magnetic starter, 10-12 dba, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Denray
Model: 3672
Year: 2026
DENRAY 3672 B Downdraft Sanding Table.Convenient 36" x 72" Table, comfortable 36" working height w/ DENRAY's Pulse Jet Cleaning System. -- Rated at 3,500 CFM. -- 2 HP, 3-Phase motor with magnetic starter. -- Self-contained system with 80/20 cartridge filters which clean with a 99.95% capture rate at.5 microns. -- ...more
Denray #7200 B, down draft table, 48" x 72 x 36" H table, 5 Hp, magnetic starter, 2 cartridge filter, self-cleaning, push button start, 84 dba, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Denray
Model: 7200
Year: 2026
DENRAY 7200 B DOWN DRAFT TABLELarge 48" x 72" Table. -- 3,900 CFM rating after filters. -- 5 HP Motor w/magnetic starter. -- Space-saving fully self-contained unit: No duct work, no loss of conditioned air. Contains (2) cartridge filters that clean to 0.5 microns. -- Comfortable working height 36". -- 1-1/8" Thick ...more
Denray #9600-B, down draft table, 48" x 96" x 36" H table, 5 HP, magnetic starter, self-sleaning, push button start, 82 db, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Denray
Model: 9600-B
Year: 2026
DENRAY 9600 B Down Draft Sanding TableExtra large 48" x 96" table; Comfortable 36" working height. -- Powerful system with 4,800 CFM rating. -- 5 HP Motor with magnetic starter. -- Space-saving self-contained unit w/built-in dust drawers and high efficiency cartridge filters. -- No duct work, no loss of conditioned ...more
Eisenmann #110,000-CFM, Wet Electrostatic Precipitator, Total Inlet Gas Stream Flow Rate Wet Basis 52000 & 62000 (ACFM), Square tube, Down flow, 2007
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Eisenmann
Model: 110,000 CFM
Year: 2007
EISENMANN Dual Stream WET ELECTROSTATIC PRECIPITATOR (WESP) System for Gas Cleaning with Adjustable Venturi Type and Spray Tower Scrubber section: Complete with the following major components and s: -- Instrumentation including pressure, flow, temperature, level and pH sensors. -- Complete control panel including ...more
Excalibur, Timber Incising Machine, 7.8" diameter, (9) Incising Heads
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Excalibur
Excalibur Smart Incising for Round Timbers from Timber Treatment Solutions (TTS)., - 63 mm - 200 mm Diameter (1.29"-7.8"), - Minimum length of 200 mm to no max (7,8", - (9) Incising Heads, - Self cleaning system for blades, - Allows superior preservative penetration with pressure treatment, - Optional: Customized ...more
Excalibur Pro Series Timber Incising Machine, 1" x 1" to 20" x 20" Section Capacity
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Excalibur
Timber Treatment Solutions now offers an advanced incising solution for square sawn timbers with EXCALIBUR PRO, allowing a superior penetration of the wood in the subsequent preservative pressure treatment. It offers the ability to incise specific sections of post, saving on preservatives while still focusing the ...more
Extrema #XF-DC4, Power Feeder, 4-Roll, 4.75" & 2.25" rubber rollers, 2/3 HP, 7-72 FPM, 230 V., 60 Hz, 3-Ph., Brand New
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Extrema
Model: XF-DC4
Year: 2026
EXTREMA XF-DC4 Power Feeder w/Mounting ColumnExtrema has a wide range of power feeders that range from compact junior feeders to large 5-roller feeders. The XF-DC4 Series s a 4-roller system with variable speeds. Includes the 2/3 HP DC brushless servo motor for higher torque and better variable speed control than a ...more
General Motors #PTA114145, Power Takeoff Unit, Detriot Diesel #5136548
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: General Motors
Model: PTA114145
Motors Power Takeoff Unit, Detriot Diesel #5136548.
Hawk Machinery #HKH-337, Double End Tennoner(Flooring), 2016
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hawk
Model: HKH-337
Year: 2016
Hawk CNC flooring end matcher, Model HKH337 12/10/5/R/25, S/N HKH337A-20150420-01, Year 01/2016, 380 Volt three phase, 160 amps, Max working width 2540 mm (100"), Min working width 400 mm (15.7"), Max working thickness 25 mm (0.98"), Min working thickness 3 mm (0.118"), Min workpiece length 400 mm (15.7"), Feed speed ...more
Hemco 34 Bay Sling Sorter
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Hemco
Model: 34 BAY
Hemco Sorter Line, System includes:, - Unscrambler, - Board Singulator, - Even end roll case, - 34 Sling Bays, - 10 Slot Bays, - Stacker Outfeed, - Trim Saw.
JUST ADDED!
Hermary #DPR-4042VE, Head Scanner, 24 VDC, Ethernet 100 Base TX, TCP/IP Interface
Savona Equipment | Savona, BC
Category: Woodworking - General Machines
Seller: Savona Equipment
Location: Savona, BC
Mfr: Hermary
Model: DPR-4042VE
Model: DPR-4042VEElectrical Supply: 24 VDCInterface: Ethernet 100 Base TXTCP/IP.
Holz-Her #1516, 103" x 55" x 24" capacity, Analog Controls
Hoff Machinery, Inc | Minneapolis, MN
Category: Woodworking - General Machines
Seller: Hoff Machinery, Inc
Location: Minneapolis, MN
Mfr: Holz-Her
Model: 1516
JUST ADDED!
Homag #Centateq-N-300, flat table bridge gantry machine, loading & unloading, 145.7" X, 61" Y, 12.8" Z, 2021
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Homag
Model: CENTATEQ-N-300
Year: 2021
HOMAG CENTATEQ N 300/510 FLAT TABLE MACHINE (W/LOADING/UNLOADING/ATC/BORING): -- : 5' x 10' Flat Table "Bridge Gantry" machine with User-Friendly "MATRIX" grooved phenolic vacuum table. -- Working Area:"X" Axis is 122" (3,100 mm), "Y" axis 61" (1,550 mm), "Z" axis stroke Routing is 12.8" (325 mm), "Z" axis ...more
Italpresse #Trans-Former, air membrane press, 2500 x 1300mm, 25.5 HP, 2018
Lenmark Industries | Langley, BC
Category: Woodworking - General Machines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Italpresse
Model: TRANS-FORMER
Year: 2018
SKU: 140045, Model: Trans-Former, Year: 2018, Condition: Used, S/N: 195041018, Electrical :, Voltage: 400 volts, Phase: 3-phase, Made In: ITALY, Dimensions: 110.00 (H) x 80.00 (W) x 320.00 (L) inches, Additional :, Electrical:, - Max. power: 19 kW // 25.5 hp, - Drive voltage: 110 volts AC / 24 volts DC, - Line ...more
Jlt Clamps JLT Pro Series Panel Pro Clamp #78D-5-S, 5-Levels, (6) clamps each with panel flatner
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Jlt Clamps
Model: 78D-5-S
JLT Panel Pro Clamp Model 78D-5-S, 5-Levels with (6) clamps each with panel flatner, 110 v Single phase, Will do 80”x 40”.
Koger Blower (No Motor)
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Koger
14@ x 16” inlet, 16” Round inlet, no motor.
Lobo Tenor, GB-CIS Single-end, 5" wide rubber pad conveyor, 2006
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Lobo
Year: 2006
GB-CIS Single-end, 575V / 3 Ph / 60 Hz, 5” wide rubber pad conveyor, industrial motor for full power cutting and sanding capacity.
Masterwood #Winner-3.2, CNC machine, 24000 RPM, ISO 30, PC control windows, 2003
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking - General Machines
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Masterwood
Model: WINNER-3.2
Year: 2003
2003 Masterwood Model Winner 3.2 used CNC machineFor pricing please click REQUEST QUOTE wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com.Click <[LEASE](https://www.brightonmachines.com/pages/lease)> for leasing informationClick ...more
Mazzoni #TVA/A, biller log cutter, approx 4.5" centers, set up for 9" logs, 1984
Federal Equipment Company | Cleveland, OH
Category: Woodworking - General Machines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Mazzoni
Model: TVA/A
Year: 1984
Used Mazzoni billet log cutter, type TVA/A, approximately 4.5" centers, set up for 9" center logs, serial# 1255, built 1984.
Mereen-Johnson #110-C, Equalizer, feeds One Piece per Lug, 36" max Width capacity, 7.5 HP, 3600 RPM, 460 V
RT Machine | Hughesville, PA
Category: Woodworking - General Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen-Johnson
Model: 110-C
Mereen-Johnson 110-C Equalizer Equalizer Vertical Hopper feeds One Piece per Lug, Trim Motors on LH and RH sides. Single Piece or unsurfaced Glued-up Panels Two 7-1/2 HP 3600 RPM TEFC Standard Frame Arbor Motors Tilting From 0 to 45 Degrees Arbor Motors arranged for 3 phase, 60 Hertz, 460V, 24v DC Controls Voltage. ...more
Minnesota #24-8, carving machine, 24-spindles, 8" btwn centers, 72" length capacity, manual table elevation, motorized stock rotation
Ex-Factory | Charlotte, NC
Category: Woodworking - General Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Minnesota
Model: 24-8
MINNESOTA 24-8 Multi-Spindle Carving Machine.: -- Spindles/Capacity: (24) Spindles, 8" between centers & 72" length capacity. -- Motors: (12) 0.75 HP motors with (1) motor driving (2) spindles via flat belt. -- s: Manual table elevation, motorized stock rotation, non-indexable head. -- Comes with: (2) Sets of ...more
Multitek #2040XP, Firewood Processor, shuttle grapple, 30' conveyor, 60" carbide tipped circle saw, 2015
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Multitek
Model: 2040XP
Year: 2015
Multitask 2040XP Firewood Processor, John Deere 125 HP Diesel, Shuttle Grapple, 30' Conveyor, 60" Carbide tipped circle saw (new teeth), 6 & 8 Way wedges, 4-Leg live deck, Max log length 40', Max log diameter 23", 35 Ton Splitter.
Multitek #2040XP2, Firewood Processor, 4.5-7 cords per hour, 125 HP, 40' max log length, 23" max log diameter, 60" circular saw, 2015
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Multitek
Model: 2040XP2
Year: 2015
4.5 - 7 Cords per hour, 100 HP Electric drive, 40′ max log length, 23” max log diameter, 60” circular saw, 16-way splitter head, cab with joystick controls, numerous spare parts, Infeed and outfeed included, 15359 hours.
Multitek #2040XP2, Firewood Processor, 2005
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Multitek
Model: 2040XP2
Year: 2005
New John Deere motor, New clutch, New blower motor, Grapple support strengthened, Most hoses replaced, 4-way - 10-way - 12-way splitters, 24 foot American conveyor, working daily and available for inspection.
Newman #K-20, Trim Saw w/ Infeed & Outfeed, (2) Blades - Aprox 20" diameter
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Newman
Model: K-20
Newman K20 Trim Saw, (2) Blades - Aprox 20" diameter, Infeed deck is about 40' long. No chain is included.
Newman #M-255, Automatic Feed Table, recently refurbished, updated w/ electric drive motors
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Newman
Model: M-255
Newman M-255 Automatic Feed Table, Recently refurbished, Updated with electric drive motors.
Ogden #RFS-Protech-SL-3660, radio frequency gluer, 2018
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Ogden
Model: RFS PROTECH SL 3660 RADIO FREQUENCY GLUER
Year: 2018
Ogden SL3660 RFS.
Omec #ICA-600, Automatic Glue Machine, new
RT Machine | Hughesville, PA
Category: Woodworking - General Machines
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omec
Model: ICA-600
Omec Model ICA 600 Automatic Glue Machine Technical Data: On board machine installed power: 0.5kw Working pressure: Mpascal 0.7 Glue Type: vinyl glue Glue Tank Capacity: 32 Workpiece Limits Draw Length: min. 150mm max. 600mm Draw Width: min. 60mm max. 4050mm Draw Thickness: min. 4mm max. 25mm Standard Equipment ...more
