back to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Wood Finishing Equipment

31 Results

American Finishing System 1, Automatic Vacuum Coater, 25 FPM, 10 HP, 4" thick x 12' width capacity, 30" min. workpiece L, Stainless Steel, 2005

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: American Finishing System
Year: 2005
AMERICAN FINISHING SYSTEMS 12" WIDTH CAPACITY VACUUM COATER:Listed here is a 2005 vacuum coater in very good condition as can be seen in the photos. The basic for this machine are: ...more

Barberan Uv Oven

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Barberan
Model: UV OVEN
Barberan UV Oven.

Burkle VBM-1600, Panel Cleaner, Single sided, 16000 mm wide, two brush panel cleaner, 2018

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Burkle
Model: VBM 1600
Year: 2018
FOR SALE is a single sided machine, 1600mm wide two brush panel cleaner, the brushes are TAMPICOS: &#9679 Heads can be positioned as needed spacing between the brushes by sliding ...more

Burkle, wire brush machine, 50"

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Burkle
This machine was customized to be a wire brush machine for a floor finishing line.

Burkle Cefla Barberan Roll Coaters & Uv Ovens

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Burkle Cefla Barberan
Model: ROLL COATERS & UV OVENS
This inventory was just removed form a facility in the past 6-months. The seller replaced with a brand new line. Everything is ready to ship., Includes:, Burkle SLC1300 Roll Coater, Burkle ...more

Get email updates for newly added Wood Finishing Equipment

C III Industries Stain-Boss, Flow Coater, 16" width, 8" thickness

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: C Iii Industries
Model: STAIN BOSS
This is a CIII INDUSTRIES STAIN BOSS Flow Coater with a width capacity of 16 inches and thickness up to 8 inches. This machine looks rough but it has just recently been restored by the ...more

Cefla Easy-w/2000, Spray Line w/Vertical Oven, 52" width, Panel Cleaner, Spray Mach., Conveyor, Vertical Oven, 2001

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: EASY W/2000
Year: 2001
CEFLA EASY/2000 plus CEFLA FV 2/N/4700/EE & TTR/6500 Vertical Oven Flat Finishing Line with Panel Cleaner.Pos. 1. Infeed-powered belt conveyor, approx. 52" width.Pos. 2. SORBINI ...more

Custom Built Lateral Outfeed Transfer, 2018

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Custom
Year: 2018
This machine is a demo unit and available for sale. Workpiece length 3’-9’ Workpiece width ½” - 8” Speeds 30-150 FPM Number of drop down ...more

Delle Vedove #SLC-5 4-Gun Lineal Sprayer, 4-Gun Sprayer, 8" width capacity, 2012

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Delle Vedove
Model: SLC-5
Year: 2012
Delle Vedove SLC15 Sprayer, 4-Gun Sprayer, 8" Width capacity, Manufacture (to be confirmed):, Machine base structure made of modular fabricated steel, Enclosed spray booth with frontal ...more

52" Dmc Unisand-2000, Orbital Pad/Denibbing Brush, (2) Orbital heads w/ (2) 5" wide platen, (2) 7.5 HP, 2003

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dmc
Model: UNISAND 2000
Year: 2003
DMC Unisand 2000 model US1350M2 Orbital Sander (2 Heads)2-Head, 52" width cap. and with (2) Orbital heads.: -- 1st & 2nd Orbital Heads: -- Each orbital head with (2) 5" wide platen for ...more

Dubois #SBT-48, denibber

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dubois
Model: SBT-48
Dubois SBT-48 Denibber.

Dubois #SP-12 Lineal Sprayer

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dubois
Model: SP-12 LINEAL SPRAYER
Dubois Lineal Sprayer with Guns.

EX-VAC MC/WB-300, ' H2O' Vacuum Coater, 12" max width x 2-1/4" max height, 24" min length, 6" conveyor belt, 30-200 FPM, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ex-Vac
Model: MC/WB 300
Year: 2022
EX-VAC "MC/WB 300" VACUUM COATER 3- or 4-sided coating, 12" max. width x 2-1/4" max. height, 24" min. length; Substrate enters vacuum chamber via 6" conveyor belt and passes through the ...more

Fen Chaou finishing system

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Fen Chaou
Photos coming!, System includes:, 24” in-line sander- Single head with buffing roller and clean up brush $340024” Double roll coaters 3ea-24” 2 bulb UV ovens 4ea24” ...more

Fin ST-1600, Panel Cleaner, 62" Width, 3-1/8" opening thickness, Top & bottom 7" diameter nylon brushes, 3" diameter rubberized infeed & outfeed pinch rolls, 2002

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Fin
Model: ST 1600
Year: 2002
FIN ST 1600 Top/Bottom Cleaning Brush62" Width and 3-1/8" max. thickness opening, thickness adjustment by hand wheel via worm gear with dial indicator.: -- Top & bottom 7" dia. nylon ...more

Formeco #DI-60-AX Solvent Distiller, 2017

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Formeco
Model: DI-60-AX
Year: 2017
Formeco DI 60 AX Distiller.

Industrial Heating, 24" x 96" belt with 28" wide opening into oven, Dayton gear drive with 1/2 HP DC motor

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Industrial Heating
24" x 96" belt with 28" wide opening into oven, Dayton gear drive with 1/2 HP DC motor, 230 volt UV unit, 96" x 42" x 71" overall dimension.

Makor Q-ONE, spray finishing line, 51" working width, 21.5" max paper rol, 2008l

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Makor
Model: Q-ONE
Year: 2008
MAKOR Q-ONE Spray Line with Panel Cleaner and Multi-Level 6-Tray oven.The complete line consists of: Rolly 2000 infeed conveyor, Panel cleaner, Q-ONE paper belt sprayer, Rolly 3500 covered ...more

Makor, UV vacuum line

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Makor
Makor UV Vacuum Line, Separation tower with (2) vacuum pumps, UV Oven with (9) lamps, Adjustable electronic ballasts.

Paint O Matic Vacuum Coating Line, approx. 24" conveyor (Variable speed), Paint pump, vacuum pump

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Paint O Matic
approx. 24" conveyor (Variable speed), Paint pump, vacuum pump, 96" x 55" x 55".

Quick/Evans, 56" layup line

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Quick/evans
This line will be available around September 1, 2020.

Quickwood #UD2300 Denibber, 48" belt, 48" x 6" brushes for denibbling, top fan for dust extraction, 2001

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Quickwood
Model: UD2300
Year: 2001
Approx. 48" belt, Approx. 48" x 6" Brushes for denibbing, Top fan for dust extraction, 7' wide x 6'longx x 7.5'high 4000#.

Stanmac MC/WB-200, vacuum coayer, 8" max width x 2-1/4" max height capacity, 24" min length, 30-200 FPM, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Stanmac
Model: MC/WB 200
Year: 2022
STANMAC "MC/WB 300" Vacuum Coater; 3- or 4-sided coating. -- 8" Max. width x 2-1/4" max. height cap.; 24" min. length. -- Substrate enters vacuum chamber via 6" conveyor belt and passes ...more

Stanmac STS-300, moulding spray finishing system, 12" max sidth, 30" min length, 30-150 FPM, 0.5 HP feed motor, 3 HP extraction fan, 3-spray guns, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Stanmac
Model: STS 300
Year: 2022
STANMAC SPRAY 300 Moulding Sprayer The Stanmac Spray 300 is ideal for linear profiles in a wide range of materials and capable of utilizing both waterborne and solvent-based coatings ...more

Stanza PM-251, Cross Transfer / Lateral Feed, 9' L x 8" width workpiece, 150 FPM, 10 drop down roll, 4 cross belts, 20" on center, 2019

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Stanza
Model: PM-251
Year: 2019
2019 Stanza Lateral Outfeed Transfer - Demo unitMachine working Parameters;Workpiece length: 3’ min - 9’ maxWorkpiece width: ½" min - 8" maxSpeeds: 30-150 ...more

Superfici #Climber-Easy-150-C-2/2100, Moulding Spray Finishing Line, 150 FPM, 900+-20 mm working height, 10' 6" L profile, 20 pc/min

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Superfici
Model: CLIMBER EASY 150-C-2/2100
Year: 2014
AUTOMATIC MOULDING STACKER --- MOD. "CLIMBER EASY" 150-C-2/2100This machine collects strips/profiles coming from a painting line and stacks them up automatically on suitable racks for ...more

Superfici #Compact-CLFUV, finishing line

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Superfici
Model: COMPACT-CLFUV
Superfici Finishing Line, 1 x 0000 S OF OFFER, Coatings : Universal, Drying results vary according to the coating., Workpiece Dimensions (Approx.):, Min. - max. length: 300 mm (12") - 2440 ...more

Venjakob #Ven-Spray-Smart-Spray-Line, Infd & Outfd - Makor, Ecodose 2K Verind, 2017

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Venjakob
Model: VEN-SPRAY-SMART-SPRAY-LINE
Year: 2017
Venjakob Ven Spray Smart Finish Line, Infeed & Outfeed - Makor, Ecodose 2K Verind.

Web Mechanical JET-10M, high velocity oven, 400,000 BTUH, 3200 CFM, 5 HP, 2022

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Web Mechanical
Model: JET 10M
Year: 2022
WEB MECAHNICAL JET 10M Jet Air Oven Supply Side complete with the following: -- 400,000 BTUH rating, 3,200 CFM forward curved blower, 5 HP motor 575 V /3 Ph /60 Cy. -- Inlet filter section ...more

Am & D Vacumizer-100, Automatic Vacuum Coater, 1-1/2" H x 5-1/2" width product cross-section, 9" min. product L, 10-gal. reservoir, 2002

Ex-Factory | Charlotte, NC | Sales Dept. |
Seller: Ex-Factory
Location: Charlotte, NC
Model: VACUMIZER 100
Year: 2002
AM&D VACUMIZER 100 Vacuum Coater: -- Max. product cross-section 1-1/2" high x 5-1/2" wide, min. product length 9"; standard vacuum chamber, 10-gal. reservoir, -- (1) 7.5 HP vacuum ...more

Custom Built Finishing Line, Deduster, Finish Line, UV Dryer, Compressor, Paint Ovens, Paint Booths

Carolina Machinery Sales | Monroe, NC | Ralph Viegelmann |
Seller: Carolina Machinery Sales
Location: Monroe, NC
This line was imported from China and is only a few years old. Everything is operational and ready to move., Deduster, Finish Line, UV Dryer, Compressor, Paint Ovens, Paint Booths.