go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Radial Arm Saws

warning
35 Results

Cam-Wood #RS-612X, Radial Arm Saw, 2 HP, 3-1/8" cut depth, 10-12" diameter blade, 27" trimming width x 16-1/2" crosscut, 1" diameter spindle, 25-1/2" x 31-1/2" table, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-612X
Year: 2025
CAM-WOOD RS-612X Radial Arm Saw Sturdy cast iron frame for saw head and arm.: -- 2 HP Single-phase motor; 3-1/8" cutting depth with 10-12" dia. blade; 27" max. trimming width x 16-1/2" max. crosscut; 1" dia. spindle. : -- Magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head ...more

Cam-Wood #RS-640X, radial arm saw, sturdy cast iron frame, 4 HP, 4-1/8" cutting depth, 14" diameter blade; 43" max trimming width x 24" max crosscut, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-640X
Year: 2025
CAM-WOOD RS-640X Radial Arm Saw Sturdy cast iron frame for saw head and arm.: -- 4 HP motor; 4-1/8" cutting depth with 14" dia. blade; 43" max. trimming width x 24" max. crosscut. : -- Laser Light, magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head that glides on ...more

Cam-Wood #RS-660X, radial arm saw, 4 HP Motor; 4-1/8" cutting depth, 16" diameter blade, 45" max trimming width x 35" max crosscu, 0-180 degree saw head rotation, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-660X
Year: 2025
CAM-WOOD RS-660X Radial Arm SawSturdy cast iron frame for saw head and arm.: -- 4.5 HP Motor; 5-1/8" cutting depth with 16" dia. blade; 45" max. trimming width x 35" max. crosscut. -- Large 32" x 45" wooden table. -- Magnetic starter and overload protection. -- 0 - 180 Saw head rotation with positive locks on rotating ...more

Craftsman 10" radial arm saw, 16" blade in rip, 3450 RPM, 2.5 HP, Blade Gaurd, Tilting Blade

Wheeler Machinery Sales | Pomona, CA
Category: Radial Arm Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Craftsman
Craftsman 10" Radial Arm Saw #7438 #1, Blade Size: 10", Blade In Rip: 16", Main Motor: 3450 Rpm, 2.5 HP, Electrics, 110 Volt, Single Phase, Blade Gaurd, Tilting Blade, Swiveling Head.

Dewalt #35-Series, Radial Arm Saw, 7.5 HP, 22" diameter Blade, 52" L arm, 1" x 3-1/8" saw arbor, 7" thick capacity @ 90 deg, 26" crosscut, 40" rip capacity

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dewalt
Model: 35 SERIES
DEWALT - 35 Series Super Duty,.22" Radial Arm Saw: -- 7.5 HP TEFC Saw motor; 22" dia. blade; 52" long arm; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90; 26" crosscut cap.; 40" rip cap. -- Complete with: -- Blade guard, magnetic starter, stand, and carriage return mechanism. -- Optional: Electric brake.

Get email updates for newly added Radial Arm Saws

Radial Arm Saws (also known as overhead saws) are versatile cutting tools with a circular blade mounted on a horizontal arm, allowing for adjustable, precise cuts in wood, metal, or plastic. Commonly used in woodworking, construction, and fabrication, they are ideal for tasks such as crosscuts, rip cuts, and bevels. Radial arm saws are essential for achieving accurate, repeatable cuts in a variety of applications.

Dewalt #GA, Heavy Duty Radial Arm Saw, 5 HP, 16" diameter Blade, 1" x 3-1/8" saw arbor, 4" thickness capacity, 21" crosscut capacity

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dewalt
Model: GA
DEWALT GA 16" Radial Arm Saw : -- 5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 4" thickness cap. @ 90, 19" crosscut cap., cutting 1" board with long arm. -- Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional: -- Electric brake. -- Photo not of actual machine.

Dewalt #GE, radial arm saw with stand

G-2000 | Toledo, OH
Category: Radial Arm Saws
Seller: G-2000
Location: Toledo, OH
Mfr: Dewalt
Model: GE
Machine Type.Brakes, Box & Pan (incld Finger) Manufacturer.DEWALT Model.GE Year.N/A Condition.Used.

Dewalt #GE, 20" heavy duty radial arm saw, 7.5 HP TEFC motor, 1" x 3-1/8" arbor

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Dewalt
Model: GE
DEWALT GE 20" Radial Arm Saw : -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; -- 6" Thickness cap. @ 90, 27" max. crosscut cap. cutting 2" board; 42" rip cap. with 52" long arm; 2" dado capacity. Complete with: -- Blade guard, magnetic starter, stand, carriage return mechanism. Includes: -- (1) New ...more

Dewalt #Model-G1, Radial Arm Saw

Carolina Machinery Sales | Monroe, NC
Category: Radial Arm Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dewalt
Model: MODEL-G1
Dewalt Radial Arm Saw.

Dewalt radial arm saw

G-2000 | Toledo, OH
Category: Radial Arm Saws
Seller: G-2000
Location: Toledo, OH
Mfr: Dewalt
Machine Type.Woodworking Sanders Manufacturer.N/A Model.N/A Year.N/A Condition.Used.

Dewalt, Black & Decker, 20" 7.5 HP radial arm saw, extra blades

Equipment Hub | Stone Mountain, GA
Category: Radial Arm Saws
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Dewalt
Stock #: 170240058, Location: Stone Mountain, GA, Brand: Dewalt, Approx. Shipping Weight: Skidding Unavailable, Approx. Shipping Dimensions: Skidding Unavailable, Blade Capacity: 20", Motor HP: 7.5, Electrical: 230V/3PH, Extra Blades, Additional Info, The DeWalt Black & Decker Radial Arm Saw can be demoed ...more

Dewalt, radial arm saw

Carolina Machinery Sales | Monroe, NC
Category: Radial Arm Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dewalt
Dewalt Radial Arm Saw.

Dewalt, radial arm saw, 7.5 HP, 20" blade capacity, 460 V., 3 phase

Equipment Hub | Stone Mountain, GA
Category: Radial Arm Saws
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Dewalt
Stock #: 200250007, Location: Stone Mountain, GA, Brand: DeWalt, Approx. Shipping Weight: 1,000 Lbs., Approx. Shipping Dimensions: 5' L x 5' W x 6' H, Skidding Fee: $150, Blade Capacity: 20", Motor HP: 7.5, Electrical: 460V/3PH, Additional Info, The Radial Arm Saw can be demoed upon request. Check out ...more

Dewalt, radial arm saw, 7.5 HP, 20" blade capacity, 460 V., 3 phase

Equipment Hub | Stone Mountain, GA
Category: Radial Arm Saws
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Dewalt
Stock #: 200250009, Location: Stone Mountain, GA, Brand: DeWalt, Approx. Shipping Weight: 1,000 Lbs., Approx. Shipping Dimensions: 10' L x 5' W x 6' H, Skidding Fee: Skidding Unavailable, Blade Capacity: 20", Motor HP: 7.5, Electrical: 460V/3PH, Additional Info, The Radial Arm Saw can be demoed upon ...more

DeWalt, Black & Decker, The Original, 20" radial arm saw, 7.5 HP

Equipment Hub | Stone Mountain, GA
Category: Radial Arm Saws
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Dewalt
Stock #: 200250008, Location: Stone Mountain, GA, Brand: DeWalt, Approx. Shipping Weight: 1000 Lbs., Approx. Shipping Dimensions: 7' x 5' W x 6' H, Skidding Fee: Skidding Unavailable, Blade Capacity: 20", Motor HP: 7.5, Electrical: 460V/3PH, Additional Info, The Radial Arm Saw can be demoed upon ...more

King Canada #KC-12RAS, 12' ' Radial Arm Saw, 12" blade diameter, 5/8" blade arbor, 2 HP, new

Lenmark Industries | Langley, BC
Category: Radial Arm Saws
Seller: Lenmark Industries
Location: Langley, BC
Mfr: King Canada
Model: KC-12RAS
SKU: 60531, Model: KC-12RAS, Condition: New, Horsepower: 2 hp, Blade Diameter: 12, Saw Type: Radial Arm Saws, Made In: TAIWAN, Dimensions: 34.00 (H) x 38.00 (W) x 30.00 (L) inches, Additional :, Blade Arbor (w/ 1" Bushing): 5/8", Maximum Depth of Cut (10"/12"): 2" / 3", Maximum Depth of ...more

Omga #Radial-900-7, Radial Arm Saw, 7 HP, 35-1/2" crosscut capacity, 5-7/8 max thickness, 43-5/16 rip, 18" diameter blade w/ 1" bore, 2" max dado, 3400 RPM arbor speed, 1998

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RADIAL 900-7
Year: 1998
OMGA 900/7 FM RADIAL ARM SAW : -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90; 24-15/16" @ 45; 5-7/8" max. thickness cap. at 90, 4-3/16" at 45; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed.s: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages ...more

Omga #RADIAL-1250-7, radial arm saw, 7 HP, 43.897" crosscut, 6-7/8" thickness, 20" diameter blade with 1" bore, 1-3/4" max dado, 3400 RPM arbor speed, 180 degree swivel, 45 degree saw head tilt, 202**

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RADIAL-1250-7
Year: 2025
OMGA Radial 1250-7 Radial Arm Saw -- : 7 HP Saw motor, 43.897" crosscut cap. at 90; 6-7/8" thickness cap. at 90, 4-7/8" at 45; 59" rip cap.; 20" dia. blade with 1" bore; 1-3/4" max. dado cap.; 3,400 RPM Arbor Speed. -- s: Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) ...more

Omga #RADIAL-600-P3S, radial arm saw, 8 bearings with dust scrapers, 180 degree swivel, 45 degree saw head tilt, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RADIAL-600-P3S
Year: 2025
OMGA RADIAL 600 P3S Radial Arm Saw - 24" Crosscut Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180 Swivel of entire saw carriage for mitered crosscuts. -- 45 Saw head tilt for compound miter ...more

Omga #RADIAL-900-7, radial arm saw, 7 HP, 35-1/2" crosscut, 24-15/16" max thickness, 4-3/16" rip, 18" diameter blade with 1" bore, 3400 RPM arbor speed, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RADIAL-900-7
Year: 2025
OMGA RADIAL ARM SAW 900-7 -- : -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90; 24-15/16" @ 45; 5-7/8" max. thickness cap. at 90, 4-3/16" at 45; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed. -- s: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages ...more

Omga #RN-450, radial arm saw, 8 bearings with dust scrapers, 180 degree swivel, 45 degree saw head tilt, electro-magnetic brake, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RN-450
Year: 2025
OMGA RN 450 Radial Arm Saw: -- 3 HP Saw motor; 12" blade; 17-3/4" crosscut cap.; 26-3/4" rip cap.; 3-1/2" @ 90 thickness cap., 2-1/2" at 45; 1-1/2" dado cap.; solid saw carriage with replaceable tempered steel sliding tracks. : -- Carriage that travels on (8) bearings with dust scrapers for smooth travel & ...more

Omga #RN-450FMUS, radial arm saw, 12" saw blade diameter, 27" x21" table, 4 HP, 2013

Yoder Machinery Sales | Holland, OH
Category: Radial Arm Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Omga
Model: RN-450FMUS
Year: 2013
SERIAL. 8215, MODEL. RN450FMUS, YEAR NEW. 2013, SAW BLADE DIAMETER. 12", CUT DEPTH @ 90. 3-1/2", CUT DEPTH @ 45. 2-1/2", CROSS CUT CAPACITY. 17-3/4", TABLE SIZE. 27" X 21", MITER POSTIVE STOPS. 45-0-45, RIPPING CAPACITY. 26-3/4", MAX. DADO CAPACITY. 11-1/2", SAW BORE. 1, MOTOR HORSEPOWER. 4.

Omga #RN-700, radial arm saw, 5 HP, 27-1/2" crosscut capacity, 8 bearings with dust scrapers, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RN-700
Year: 2025
OMGA RN-700 RADIAL ARM SAW & s: -- 5 HP, 27-1/2" Crosscut cap. @ 90; 19-7/16" @ 45. -- Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- Self-centering locking in the positions of the main angles ...more

Omga #RN-900, radial arm saw, 8 bearings with dust scrapers, 180 degree swivel, 45 degree saw head tilt, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: RN-900
Year: 2025
OMGA RADIAL ARM SAW MODEL 900 Series RN Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180 Swivel of entire saw carriage for making mitered crosscuts. -- 45 Saw head tilt for compound miter cuts. ...more

Original #3551, Radial Arm Saw, 24" crosscut, 49" x 50" table, 16" blade capacity, 4-3/8" thickness @ 90 deg., 5 HP

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Original
Model: 3551
ORIGINAL - 3551,.Radial Arm SawThe "Original" Radial Arm with: Full 24" crosscut capability. -- Sturdy cast iron frame for saw head and arm.: -- 5 HP Single-phase motor with: Magnetic starter and overload protection. -- Saw head with: Automatic motor brake and automatic return. -- Positive locking device for tilting. ...more

Original Saw Co. #3579-20 type 7, 20" super duty aluminum metal cutting radial arm saw'

Equipment Hub | Stone Mountain, GA
Category: Radial Arm Saws
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: Original Saw Co
Model: 3579-20
Stock #: 170240052, Location: Stone Mountain, GA, Brand: Original Saw Company, Model: 3579-20, Serial #: 020410668, Approx. Shipping Weight: 1000 Lbs., Approx. Shipping Dimensions: 6' L x 5' W x 6' H, Skidding Fee: Skidding Unavailable, Blade Size: 20", Max Cut Depth: 7", Max Crosscut: 31" ...more

The Original #3579-20M, 20" metal cutting radial arm saw, automatic feed/return, powered elevation

Equipment Hub | Stone Mountain, GA
Category: Radial Arm Saws
Seller: Equipment Hub
Location: Stone Mountain, GA
Mfr: The Original
Model: 3579-20M
Stock #: 180250006, Location: Stone Mountain, GA, Brand: The Original, Model: 3579 20M, Serial #: 20130711454, Approx. Shipping Weight: 1500 Lbs., Approx. Shipping Dimensions: 5' L x 6' W x 6' H, Skidding Fee: $150, Blade Size: 20", Max Depth if Cut at 45 Deg Bevel: 3-1/4" Deep, Max Crosscut at Max ...more

The Original Saw Co. #3531-03, Radial Arm Saw, 5 HP, 14" blade size, standard arm, 1" x 2-3/16" arbor

SOMINN Machinery Sales | Dodge Center, MN
Category: Radial Arm Saws
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: The Original Saw
Model: 3531-03
ORIGINAL (USED) MODEL 3531 03 RADIAL ARM SAW, - 5 HP, - 3 PHASE, - 50/60 HZ, - 208 / 230 / 460 VOLTS, - 14" BLADE SIZE, - STANDARD ARM, - 1" x 2 3/16" ARBOR, - 758 MM MAX. OUT RIP, - 406 MM MAX. CROSS CUT 1" STOCK, - 276 MM MAX. MITER 45 DEG. 1" STOCK, - 104 MM MAX. DEPTH OF CUT, - 44MM MAX. ...more

The Original Saw Company #3531-03, Manual Radial Arm Saw, automatic brake, 14" diameter Blade, 29.875" Out-rip, 16" cross cut, 4.125" Cut depth, 1" x 2.19" Arbor, 5 HP, 575 V

Lenmark Industries | Langley, BC
Category: Radial Arm Saws
Seller: Lenmark Industries
Location: Langley, BC
Mfr: The Original Saw Company
Model: 3531-03
SKU: 119549, Model: 3531-03, Condition: Used, S/N: 20151203011, Horsepower: 5 hp, Blade Diameter: 14" // 350 mm, Voltage: 575 volts, Phase: 3-phase, Saw Type: Radial Arm Saws, Dimensions: 61.50 (H) x 44.50 (W) x 38.00 (L) inches, Additional :, Brake: Automatic, Arbor: 1" x 2-3/16", Max. out-rip: ...more

Original #3512-03, radial arm saw, 3 HP, 12" diameter blade, 1" x 2-3/16" saw arbor, 3-1/16" thickness, 24-1/4" crosscut with 1" stock, 21-1/4" with 3" stock, 16" max miter cut, 34-15/16" rip, 2025, **

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3512-03
Year: 2025
ORIGINAL 3512-03 RADIAL ARM SAW (Contractor Series)The Contractor Duty Series is an industrial rated machine that has the versatility to crosscut, bevel cut, miter cut, and swivel to a rip position to cut down panels precisely and accurately. These machines are well suited for cutting off up to 3"; material, as well ...more

Original #3546, radial arm saw, 5 HP, 16" diameter blade, 1" x 2-3/16" saw arbor, 4-15/16" thickness, 24" crosscut, 5-1/2" max miter cut, 42-1/2" x 31-1/4" MDF table, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3546
Year: 2025
ORIGINAL 3546 RADIAL ARM SAW (Heavy Duty Series)The Heavy Duty Series is a very precise machine made for the rigors of every day industrial use. Straight, miter, bevel and compound bevel cutting in a heavy gauge steel powder coated frame & legs. : 5 HP TEFC Saw motor; 16" dia. blade; 1" x 2-3/16" saw arbor; ...more

Original #3558, radial arm saw, 7.5 HP, 20" diameter blade, 1" x 3-1/8" saw arbor, 6-1/4" thickness, 32" crosscut, 21-5/8" max miter cut, 48-3/4" rip, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3558
Year: 2025
ORIGINAL 3558 RADIAL ARM SAW (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy-duty cast and ductile iron for vibration-free operation. : -- 7.5 HP TEFC Saw ...more

Original #3579-16L, radial arm saw, 7.5 HP, 16" diameter blade, 1" x 3-1/8" saw arbor, 5" thickness, 32" crosscut, 21-5/8" max miter cut, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3579-16L
Year: 2025
ORIGINAL 3579-16L Metal Cutting Radial Arm Saw (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation.: ...more

Original #3579-20L, metal cutting radial arm saw, 7.5 HP TEFC motor, 20" blade diameter, 1" x 3-1/8" arbor, 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3579-20L
Year: 2025
ORIGINAL 3579-20L Metal Cutting Radial Arm Saw (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. ...more

Original #3579-22L, Radial Arm Saw, 7.5 HP, 22.5" diameter Blade, 8" Thickness Capacity, 460 V., 2025, new

Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: 3579-22L
Year: 2025
ORIGINAL 3579-22L Metal Cutting Radial Arm Saw (SD Series)SD Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. Aluminum, Brass ...more