13 Results
JUST ADDED!
Cefla #MITO-2P, Reciprocating spray machine, 3.2-19.7 FPM, 554 run hours, 2017
Ex-Factory | Charlotte, NC
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: MITO-2P
Year: 2017
VERY LOW HOUR MACHINE; power on 760 hours, running 554 hoursThe CEFLA MITO 2P is an automatic industrial spraying machine used for the uniform application of paints, sealers, stains, and coatings onto wood panels, doors, and components within industrial manufacturing processes. The machine utilizes two oscillating ...more
JUST ADDED!
Cefla #Kleenspray, flatline reciprocating spray system, (4) guns, 51" max width, 76" spray enclosure, paper belt overspray, 2006
Ex-Factory | Charlotte, NC
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: KLEENSPRAY
Year: 2006
CEFLA/FALCONI KLEENSPRAY 12 Reciprocating Spray System; -- The "Kleenspray 12" Reciprocating Automatic Spraying system is mainly based on the use of a closed continuous CFB belt conveying the panels to & through the spray area. The design s many advanced mechanical solutions that provide significant advantages. ...more
JUST ADDED!
Cefla #EASY-2000-D, reciprocating spray machine, 2-arm dry filter, (3) independent paint circuits, reconditioned 2007
Ex-Factory | Charlotte, NC
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: EASY-2000-D
Year: 2007
CEFLA - EASY 2000 D: Finish SystemCEFLA - Easy 2000: Reciprocating Spray Machine. 2-Arm dry filter Reciprocating Spray Machine with: (3) Independent paint circuits; allows several different coatings to all applied using the same machine with reasonably quick-change over. Parts are electronically scanned as they enter ...more
Makor, Complete Panel Finishing Line, Butfering wide belt sander, Q-One reciprocating sprayer, (2) FastDry heat tunnels, Makor rolly infeed conveyor, 480 Volt, 3PH
RT Machine | Hughesville, PA
Category: Woodworking Panel Finishing Systems
Seller: RT Machine
Location: Hughesville, PA
Mfr: Makor
Line Consists of Makor Rolly Infeed Belt, Butfering Model SBR413HTBB Wide Belt/Brush Sander, Two Makor Rolly Belt Conveyors, Makor FastWarm Pre-Heating Unit Makor Q-One Reciprocating Spray Machine, Makor Rolly Belt Conveyor, Two Makor FastDry Heat Tunnels (Laminar and High-Velocity), and Makor Rolly Outfeed Conveyor ...more
Cam-Wood #TS-12ATSPX, moulding spray finishing system, 24" x 3.5" capacity, 32-96 FPM, PLC Control, 2026
Ex-Factory | Charlotte, NC
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: TS-12ATSPX
Year: 2026
TS-24ATSPX:s: Through feed conveyor with cleaning brush for the belt, no minimum length limitation. PLC control for easy operator and variability setup. Fast spraying processing for profile strips and two edges in one pass through the machine. Spray gun "On/OFF" controlled by photocell sensor for automatic spray ...more
Get email updates for newly added Woodworking Panel Finishing Systems
Woodworking panel finishing systems are specialized production machines designed to apply protective coatings and finishes to large wood panels. These systems handle processes like surface sanding, staining, sealing, and UV or infrared curing to ensure a thorough finishing process. They are commonly used in high-volume panel production to provide consistent quality and enhance the durability and appearance of furniture, cabinetry, and construction panels.
Cam-Wood #TS-12ATSPX, moulding spray finishing system, 12" x 3.5" capacity, PLC Control, 2026
Ex-Factory | Charlotte, NC
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: TS-12ATSPX
Year: 2026
TS-24ATSM:s: Through feed conveyor with cleaning brush for the belt, no minimum length limitation. PLC control for easy operator and variability setup. Fast spraying processing for profile strips and two edges in one pass through the machine. Spray gun "On/OFF" controlled by photocell sensor for automatic spray ...more
Cefla, Panel & Door Flipper, 137.8" working length x 57.09" width, 1.97"-2.76" panel thickness, 7 HP
Brighton Woodworking Machinery | Uxbridge, ON
Category: Woodworking Panel Finishing Systems
Seller: Brighton Woodworking Machinery
Location: Toronto, ON
Mfr: Cefla
CEFLA PANEL AND DOOR FLIPPERWhy your shop needs the Cefla Pnel and Door Flipper.Double-Sided Productivity: Eliminate the need for manual handling between coats. This unit automatically turns panels or doors, allowing your line to process both sides in a single pass for multiple-coat applications.Versatile Integration: ...more
Stanza, Brush Coating Finish System, 6'-20' Lumber, 125-150 FPM, chain deck
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Panel Finishing Systems
Seller: Carolina Machinery Sales
Location: Monroe, NC
Stanza Brush Coating Finish System for paint or stain, Still under power. Ready to dismantle and ship!, - 12' Infeed conveyor, - 12' Outfeed conveyor, - Lateral Cross Feed Deck, - Chain deck to Dryer, System is set up for:, - 6'-20' Lumber, - 2.5"-12" Wide material, - 1"-2" Height, - Sherwin Williams ...more
Cefla, 3 Lamp UV,
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Panel Finishing Systems
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cefla
3 lamp UV, 2 from the top, 1 from bottom, control panel.
Cefla #RotoStain-RT-2000, Rotary Stain Machine, 20-Gun, 0"-51" Work width, 12" min. Work length, 65" Continuous Belt, 2-11 MPM, 10.7 kW, 2005
Ex-Factory | Charlotte, NC
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: ROTOSTAIN RT 2000
Year: 2005
CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized for automatic application of stain material on workpieces; the "Roto-Stain ROT 10 + 10" represents a new generation Spray Machine from CEFLA, the leader in CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized ...more
Cefla #UVR-SF-SP, 5' Wide Single Lamp UV Oven, 480 Volts, 3PH, 60 Hz, 2013
Ex-Factory | Charlotte, NC
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cefla
Model: UVR SF SP
Year: 2013
CEFLA 5 Ft. Wide Single Lamp UV OvenGreat for handing those "extra wide" Panels!s: -- UV-R Super Focus: This configuration is suitable for reducing the heating effect of the lamps on artifacts sensitive to high temperatures (e.g. resinous wood). -- The particular shape of the lamp parabolas focuses the UV ray beam at ...more
IST #AW-80, industrial pail washer, 80 gallon tank,
Ex-Factory | Charlotte, NC
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Ist
Model: AW-80
IST (Industrial Surface Technologies) - AW 80,.Industrial Washer with vibration.ISTpure's Stir Wash Tanks are designed to clean complex parts with an adjustable stirring platform for up to 100 stirrings per minute.Parts washers by stirring are very effective in thoroughly cleaning the surface and interior cavities ...more
Supreme Air Systems, Conveyorized Paint Spray Line, (2) Open Face Free-Standing Dry Filter Paint Spray Booths, 5 HP exhaust fan, (2) Infrared Drying Units, 12500 cfm Natural Gas Heated Air Make-up U**
Ex-Factory | Charlotte, NC
Category: Woodworking Panel Finishing Systems
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Supreme Air Systems
Model: 2-BOOTH
Year: 2005
SUPREME AIR SYSTEMS - Conveyorized Paint Spray Line -- (2) SUPREME AIR SYSTEMS - PRO-FIT: 12' W x 14' D x 12-1/2' H Open Face Freestanding Dry Filter Paint Spray Booths. Each with: (2) Cutout openings for conveyor & parts; (4) ceiling flush-mounted light fixtures; bolt-together galvanized steel panels; ...more
