Estimated monthly payment valid upon approved credit.
Description
CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized for automatic application of stain material on workpieces; the "Roto-Stain ROT 10 + 10" represents a new generation Spray Machine from CEFLA, the leader in CEFLA "ROTOSTAIN RT 2000 10 + 10 Rotary Stain Machine with: -- 20 Guns; utilized for automatic application of stain material on workpieces; the "Roto-Stain 2000 10 + 10" represents a new generation Spray Machine from CEFLA, the leader in technology development for spraying applications. -- The "Roto-Stain 2000 10 + 10" incorporates CEFLA's previous innovative developments into a machine with maximum capabilities (line speed and production output) for stain application. -- Continuous 65" width carbon fiber belt enables the recovery of over sprayed coating material for reuse. -- Cefla's patented conveyor belt system for coating recovery and belt cleaning is controlled by the PLC and recovers approximately 98% of the coating material deposited on the belt, which is then automatically cleaned with "Coating Appropriate Solvents" -- The automatic air flow system monitors and maintains consistent air flow/pressurization through spray booth. When filters become too plugged to maintain sufficient air flow, system operation is ceased --electronic control unit utilizes a 60 cell photodiode bar to monitor and regulate spray application, further maximizing application transfer efficiency -- Spraying is performed through a rotary system designed for the installation of ten plus ten (10 + 10) guns in (2) coating supply circuits with recycle.TECHNICAL SPECIFICATIONS: ● Working width from 0 - 1300mm ( 0 - 51") ● Minimum workpiece length 305mm (12") ● Speed range from 2 - 11 m/min (6.6 - 36 ft/min) ● Power consumption 10.7 kW ● Compressed air required 50 NI/min (1.8 cfm) ● Exhausted solvent /air mix 10000 mc/h (5886 cfm)
CEFLA PANEL AND DOOR FLIPPERWhy your shop needs the Cefla Pnel and Door Flipper.Double-Sided Productivity: Eliminate the need for manual handling between coats. This unit automatically turns panels or doors, allowing your line to process both sides in a single pass for multiple-coat applications.Versatile Integration: ...more