21 Results
Cam-Wood #CS-18AAT-16/EM-300, End Matcher w/Optimizing Cutoff Saw, 12" width, 10.5" min. L, 300 FPM feed, (2) 5.5 HP spindle, 1.57" spindle diameter, 2026, new
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-18AAT-16/EM-300
Year: 2026
CAM-WOOD 16' Pusher Type Cutoff Saw with Crayon Marking (Optional) connected to a CAM-WOOD 12" wide End Matcher; System width capacity is 12" with a maximum inbound board length of 16' (as priced here). 8' and 12' Saws are also available. Call Jeff for price deduction. Data: -- Cut-Off Saw is arranged ...more
JUST ADDED!
Cam-Wood #CS-650SSC, double end matcher, 1-1/2"-6" width, 1/2"-1" thick, 8"-50" L, 70 FPM, 10" saw, 7-1/2 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-650SSC
Year: 2026
CAM-WOOD CS-650SCC Double End Matcher For Herringbone and Chevron FlooringNC Controlled Trough Feed Type End Matcher for Chevron and Herringbone flooring: -- Working Width 1-1/2"; to 6"; -- Working Thickness 1/2"; to 1"; -- Working Length 8"; to 50"; -- Feed Speed 70 FPM with inverter -- Cycle time can be 4 to 8 ...more
Cam-Wood #CS-650SSC, Double End Matcher, 1-1/2"-6" width, 1/2"-1" thickness, 8"-50" L, 70 FPM, 10" diameter Saw blade, 2026, new
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-650SSC
Year: 2026
CAM-WOOD CS-650SCC Double End Matcher For Herringbone and Chevron FlooringNC Controlled Trough Feed Type End Matcher for Chevron and Herringbone flooring: -- Working Width 1-1/2"; to 6"; -- Working Thickness 1/2"; to 1"; -- Working Length 8"; to 50"; -- Feed Speed 70 FPM with inverter -- Cycle time can be 4 to 8 ...more
Cam-Wood #SFJ-300AX, End Matcher, 12" width, 10.5" min. L, 297 FPM feed, (2) 5.5 HP spindle, 1.57" spindle diameter, 2026, new
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: SFJ-300AX
Year: 2026
CAM-WOOD SFJ-300A End Matcher, 12" Performs tongue and groove, tenoning, mortising, and shaping at both ends of the boards; -- Includes 10'-6" Powered Infeed and 7' Non-Powered Outfeed Conveyors. -- Air-operated hold-downs keep material firmly in place during the machining process. -- Cutter heads move in and ...more
Cantek #CFS-100/EM-12, Defector & End Matcher/Finger Joint Block, 3.2" x 12" cut capacity, 10.6" min. L x 1.38" thick x 12" width, 295 FPM, 2026, new
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cantek
Model: CFS-100/EM-12
Year: 2026
CANTEK MODEL CFS100 / EM-12 DEFECT SAW AND END-MATCHING SYSTEM:Consisting of a CANTEK model "CFS-100" Optimizing Cut-Off Saw followed by a CANTEK Model "EM 12" Through-Feed End Matcher and with the following and s: CANTEK "CFS-100" OPTIMIZING CUT-OFF SAW -- Up to 20 mm X 200 mm or 100 mm X 100 mm( 3/4" X 7.87" or 3.9" ...more
Get email updates for newly added End Matchers
End matchers are specialized tools designed to create precise tongue-and-groove joints on the ends of wood planks, essential for flooring and paneling assembly. These machines automate the cutting process, ensuring tight-fitting and consistent joints that enhance the structural integrity and appearance of woodworking projects.
Cantek #EM-12, End Matcher, 12" width x 1.38" thick x 10.6 min. L, 295 FPM feed, 173" L infeed, 86" L outfeed table, (2) 10 HP cutterhead, 2026, new
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cantek
Model: EM-12
Year: 2026
CANTEK EM-12 End Matcher;1.6" to 12" Width x 0.4" to 1.38" thickness x 10.6" min. length capacity. Unlimited lengths possible.: -- Feed speeds to 295 FPM with approximate production speeds of 77 FPM (based on 6-1/2' incoming boards). -- Standard 173" long infeed table and standard 86" (2,200 mm) long outfeed ...more
Friulmac #Randomat-E, End Matcher, 1.2"-9.9" width x 6.3"-137" L x 3/8"-1.2" thick Size capacity, (2) 120" L x 10" width Conveyors, 7.5 HP, 7500 RPM, 575 V, 2002
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Friulmac
Model: RANDOMAT-E
Year: 2002
FRUILMAC - RANDOMAT E: End MatcherFor end matching: Flooring, cabinet & entry door rails, or tongue & groove. The feed through system allows: Continuous feeding of random length parts with any kind of profile. -- Capacity & -- Width cap.: 1-3/16" x 9-7/8'; Length cap.: 6-5/16" x 137" (longer lengths ...more
Friulmac #Randomat-E, End Matcher, 1-3/16" to 9-7/8" width, 3/8" to 1-3/16" thick, (2) 5.5 HP, 2002
Carolina Machinery Sales | Monroe, NC
Category: End Matchers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Friulmac
Model: RANDOMAT-E
Year: 2002
2002 Randomat E Endmatcher, Manufacturer′s, Working cap.: width 1-3/16" to 9-7/8"; thickness 3/8" to 1-3/16" and length 7" to, Feed: (2) 5.5 HP motors for infeed and out feed 10" x 120" belt conveyors. Positioning motor (2) 1.5 HP to shaper heads for tongue and groove. Sensor activated stops for true cut ...more
Friulmac #Randomat-E, end matcher w/ tenoning, 1-3/16" x 9-7/8' width, 6-5/16" x 137" length, Siemens controller, 2005
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Friulmac
Model: RANDOMAT-E
Year: 2005
FRUILMAC RANDOMAT E - End Matcher; -- For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.Capacity & : -- Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths ...more
Friulmac #Randomat-E, End Matcher, 2004
Carolina Machinery Sales | Monroe, NC
Category: End Matchers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Friulmac
Model: RANDOMAT-E
Year: 2004
- End Matcher for the Continuous Feeding of Random Length Work Pieces, - Minimum Working Length: 160mm (6.3"), - Working Width: 30-250mm (1.18"-9.84"), - Working Thickness: 10-30mm (0.39"-1.18"), - Two 7-1/2 HP, 3ph Profiling Motors, - Spindle Speeds: 6,800 RPM, - Spindle Diameters: 40mm, - Cutterhead Feed Motor: 1 ...more
Friulmac #Randomat-E-T-Rex, end profiling line machine, 6.3" L x 9.8" W x 2" D, 2021
Machinery Max | Punta Gorda, FL
Category: End Matchers
Seller: Machinery Max
Location: Tracy, CA
Mfr: Friulmac
Model: RANDOMAT-E-T-REX
Year: 2021
Make, Friulmac, Model, Randomat T-Rex, Serial Number, M4460, Year, 2021, Phase, 3 PHASE, Voltage, 460 VOLT, Estimated Dimensions, 243"x113"x83", Estimated Weight, 6,500 Lbs, Seller Comment, Seller will disconnect and load onto buyer's flatbed truck/trailer for non-negotiable loading fee. ...more
Friulmac #Randomat-E-T-Rex, End Profiling Machine, (2) 10 HP profiling units, 9000 RPM, 2021
RT Machine | Hughesville, PA
Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: RANDOMAT-E-T-REX
Year: 2021
Sold New in 2023 Length: 160mm (6.3") to unlimited Width: 30mm (1.2") to 250mm (9.8") Thickness: 10mm (0.4") to 50mm (2") Infeed conveyor with 1-1/2HP motor Internal belt conveyor with 3/4 HP motor Overhead hold down rollers (2) profiling units 10 HP (each) HSK, quick-change Cutter Diameter: (Min/Max) 160mm (6.3") / ...more
Friulmac #Randomat-E-T-Rex, End Profiling Machine, 9.8" width x 2" thick max Work capacity, 6.3" min. Work length, 6.3"/7.9" Cutter diameter, (2) 10 HP, 9000 RPM
RT Machine | Hughesville, PA
Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: RANDOMAT-E-T-REX
Friulmac Model Randomat E T-REX End Profiling Machine, w/ HSK Tool Holders and Automatic Tool Change Capabilities Material Dimensions: -- Length: 160mm (6.3") to Unlimited -- Width: 30mm (1.2") to 250mm (9.8") -- Thickness: 10mm (0.4") to 50mm (2") Working Units: Cutter Diameter: (Min/Max) 160mm (6.3") / 200mm (7.9") ...more
Friulmac #Randomat-Multirex, End Matcher w/Stackable Spindles, 1.2"-9.9" width x 0.5"-1.2" thick Part Size, 11.25" L x 1.97" diameter Spindle, 10 HP, 9000 RPM, 460 V
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Friulmac
Model: RANDOMAT-MULTIREX
FRIULMAC - MULIREX: End Matcher with: Stackable SpindlesEnd Matcher with: Stackable Spindle for fast Changeover!: -- (2) Profiling Motors: 10 HP (7.5 kW). -- (2) Tool changer motors: 1/2 HP (0.25 kW). -- (2) Infeed/Outfeed conveyor belt motors: 1-1/2 HP (1.10 kW). -- Central conveyor belt: 3/4 HP (0.55 kW). -- Min. ...more
Northtech #NT-EM300, Linear End-Matcher, 10 HP, 460 V., 3ph, 1-1/2"-12" width, 3/8"-1-3/8" T, 11" + L, PLC, 75 FPM
RT Machine | Hughesville, PA
Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-EM300
Dual 10HP spindle motors 460V, 3PH, 60 HZ 12 CFM @ 90 PSI required (1) 6" Dust ports requiring 981 CFM @ point of extraction Width: 40mm - 300mm (1-1/2" - 12" Thickness: 8mm - 35mm (3/8" - 1-3/8" Length: 280mm (11" - unlimited Maximum Weight of Lumber: 32 lbs 40mm spindles inside precision bearing 1HP PLC controlled ...more
Osi #SM-450, Side Matcher Line, 12' tilt hoist w/ 5' L x 12' width conveyor, 1-1/2"-8" width board, (2) 15 HP, 200-450 FPM, 2006
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Osi
Model: SM 450
Year: 2006
OSI SM-450 Side Matcher LineSide Matcher:S -- Directly opposing heads (Side-Matcher): Enhances width tolerance and eliminates pistol grip -- Guarantee machining accuracy of +/- 0.002"; (0.05 mm) on width and on tongue/groove position -- Through feed system in both machines: work boards as short as 9"; (229 mm) out of ...more
Yates American #E-12, End Matcher, 2000
Carolina Machinery Sales | Monroe, NC
Category: End Matchers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Yates
Model: E-12
Year: 2000
Yates American E-12 End Matcher, System for tongue and groove flooring includes: Belt, Straight Line Blade, 3-blades, Infeed conveyor to end matcher, transfer conveyor from first machine to second machine, variable speed outfeed conveyor.
Yates American Feed Through End Matcher (2 available)
Carolina Machinery Sales | Monroe, NC
Category: End Matchers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Yates
There are two of these systems available. They were recently removed from the current operation and available immediately.
Marinus #Promax, End Matcher w/ Optimizing Cutoff Saw, 17.7" blades, 5 HP cutoff sawing servo motors, LENZE PLC control, 12" powered belt conveyor, 2010
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Model: PROMAX
Year: 2010
MARINUS - Promax: End Matcher with Defecting, Cut to Length, & Optimizing Cutoff Capabilitiess & -- Heavy and stable construction. -- Cutterhead carriage and Clamp System utilizes: HD Lineal bearings; grease lubricated. -- Heavy-Duty, low maintenance Feed Chains into machine: Takeaway of material after ...more
Fruilmac #Randomat-E, End Matcher, 7.9" diameter x 2.75" thick, 9000 RPM, 1040 hours, 2007
Carolina Machinery Sales | Monroe, NC
Category: End Matchers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Model: RANDOMAT-E
Year: 2007
2007 Randomat E End Matcher, Manufacturer′s, - Working Units:, - Cutter Diameter: (Min/Max) 160mm (6.3") / 200mm (7.9"), - Cutter Thickness: 70mm (2.75"), - Cutter Bore: 40mm, - Cutter RPM: 9000rpm, - Motor Power:, - Profiling Unit: (2) x 10HP (7.5kW), 16′ infeed, 9′ iutfeed, 1040 hours, cleaned and ...more
Friulmac #Randomat-Multirex, End Matcher, Stackable Spindles, 9000 RPM,
RT Machine | Hughesville, PA
Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Model: RANDOMAT-MULTIREX
Friulmac Randomat Multirex End Matcher, with Stackable Spindles for Fast Change-Over Two Profiling Motors: 10 HP (7.50KW) Two Tool Changer Motors: 0.5 HP (0.25KW) Two Infeed/Outfeed Conveyor Belt Motors: 1.5 HP (1.10 KW) Central Conveyor Belt: 3/4 HP (0.55KW) Minimum Part Length: 4-7/8" (120mm) Minimum Part Width: ...more
