Buy or Sell Your Lapping Machines

Manufacturer: Can-Eng, Type: Gas-Fired Batch Tempering Furnace, Heated: Natural gas @ 5 PSIG, Serial No.: CSJRPMGT-2 (furnace built 2012), Workable Dim’s: 84” wide x 72” deep x 60” high, Overall Dim’s: 11’6” wide x 13’ deep x 11’6” high, Furnace Weight: ...more

ATS ML565 Auto Barfeed (subject to buyer verification):Scope of application: Bar dimensionBar round cross section: 6 to 67mm / 2.6”Bar hexagonal cross section: 8 to 58mmBar square cross section: 8 to 47mmBar weightMaximum weight of the loaded bar 60 kgBar lengthMaximum length of the bar handled by the barfeeder ...more

Capacity: 220 Ton (200 tf), The AIDA FT2-80 880-Ton Straight Side Stamping Press is a high-capacity mechanical press built for heavy-duty metal forming and large component production. Its rigid frame ensures stability, accuracy, and consistent performance in demanding environments. Ideal for automotive, aerospace, and ...more

FORMING TONNAGE 11, DISTANCE BETWEEN JAWS:, Maximum Length of Part with Tension Cylinders, fully retracted136" (3,454.4 mm), Minimum Length of Part with Tension Cylinders, fully extended 10" (254 mm), TENSION CYLINDER STROKE each Max.10? (254 mm), Currently has 3" long spacer to reduce stoke to 7" (177.6 mm), TENSION ...more

used Trennjaeger Longitudinal Circular Cold Saw, Model PMC 8/36-48, Designed for longitudinal and cross cutting of steel sections, plates and bar grating in straight and miter cuts., Machine capacities are: 8x 24″ or 4½ x 36″ or 48″ (height x width)., · Machine stand of solid steel ...more

Machine Serial. Number 44188, Model. 175 AS Autoshape, New. 1986, Capacity. 175 TONS, Overall Length of Bed & Ram. 10’, Distance Between Housings. 8’6 3/4”, Stroke. 10”, Open Height. 17”, Closed Height. 7”, Throat Clearance. 8”, Speeds:, Approach. 235 INCH PER MINUTE ...more

Max Thickness 0.078 in Max Thickness (gauge) 14 ga Overall Length 10.49 ft Dimensions 98"/175"/74" Weight 10,500 lbs Control ERFOLD ADVANCED CNC Graphic Software on 15.6” Touch Screen control 90 mm segmented goats foot tools 10 & 25 mm sharp nose tools 2D Controller 1000 mm backguage with roller balls Spec ...more

P4 AUTOMATIC PANEL BENDER, Welcome to factory 4.0. The P4 was invented and designed by Guido Salvagnini in 1977 and has continuously been developed up to today. Salvagnini owns the largest factory for panel bending 4.0 worldwide., FLEXIBLE: Universal tool for bending from 11 to 27 gage, PRODUCTIVE: Automatic set-up in ...more

Northtech Model NT-DTM480 Semi Automatic Dovetailer 21,500RPM 2HP single spindle dovetailer 3 cycle speed selection for fine tuning of any product (4) individually operated pneumatic clamps Quick return button allows for the immediate return of the head without limit switch on rear on machine for varying width parts ...more

HOMAG - DRILLTEQ D-200/060: CNC Bore, Glue & Dowel Inserter -- Horizontal drilling block/fixture with: (3) 10 mm (0.39") Dia. individually selectable spindles; 0.55 kW (0.74 HP) - 7,500 RPM Motor; max. drilling dia.: 20 mm (0.79"). -- Low viscosity glue injection system with: Low pressure double membrane glue pump ...more

SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS OF FRANKE CNC SALES CONTRACT, WE OFFER FOR YOUR CONSIDERATION:, Used 2012 MIKRON MILL HPM 450U 5-Axis Machining Center with 7-Station Pallet Changer:, HISTORY, Machine was manufactured at +GF+ AgieCharmilles AG in Nidau, Switzerland 7/2012, CONTROL, HEIDENHAIN iTNC 530 ...more

Table Size: 76" x 14", T- Slots: 4 x 16mm x 63.5mm, Travel X: 60", Travel Y: 23", Travel Z: 20.5", Quill Diameter: 5.06", Spindle Taper: 40, Spindle Speed Range: 200-5000 RPM, Spindle Center to Column Face: 23", Spindle Motor Power: 7.5 HP, Power Requirement, Control: 110V, 1P, 15A, Power Requirement, Machine: 220V ...more

10" x 50" KENT USA KTM-3VVK MANUAL KNEE MILL - NEW, PRODUCT S, Rigid Spindle/Head housing with powerful 3 hp vector drive spindle motor 80 – 4500 rpm programmable spindle provides greater range of machining capability Metal telescopic way cover on front saddle ways for enhance durability X-axis and Y-axis metal ...more

Table Size - L 70.87", Table Size - W 62.99", Table Capacity 26,400 Lb., Table Indexing.001 Degrees, Spindle Nose To Table Center 27.56" ~ 78.74, Spindle Nose To Table Top 0 ~ 78.74", Spindle Diameter 5.1", Spindle Taper #50 CT, Spindle Speed 4,000 RPM, Main Motor 40 hp, X - Axis Travel 118.11", Y - Axis Travel 90.5" ...more

Make: Zhangjiagang Baixiong Beverage Machinery Co., Ltd., Model: Complete Line, Year: 2021, Machine Location: Massachusetts, Used Zhangjiagang Bottling Line for Still Beverages in Glass Bottles with Bottle Washer, Filler, Crowner, and Labeler:, Previously used for filling 7 oz bottles of Sake beverage at a rate of 15 ...more

5-AXIS MACHINING CENTERS Torque RTT UCP 600 Vario SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One used +GF+ MIKRON Torque RTT UCP 600 Vario 5-Axis Machining Center: Machine was made in Nidau, Switzerland 2007; first installed new 5/2008 As of 8/2020 only 5,216 Program ...more

SERIAL. 954-00197-75, AREA OF BASE. 83" X 39", SPINDLE SPEEDS. (36) 8 TO 1000 RPM, FEEDS. (18).004 TO.125 IPR, SPINDLE TRAVEL. 20", DIAMETER OF SPINDLE. 3-15/16", TAPER IN SPINDLE. #5 MT, DISTANCE SPINDLE TO BASE. 10-1/2" MINIMUM, 66" MAXIMUM, DISTANCE SPINDLE TO COLUMN. 15-5/8" MINIMUM, TRAVEL OF HEAD ON ARM. ...more

Coil size 48 wide, Coil ID 20, hydraulic clamping range from 18-1/2 to 20-3/4, Max coil OD 39, Max coil weight 3Tons = 6,600LBS, Speed: 0-100/min., Hydraulic system pressure: 0-15Mpa, Main motor: 4HP, 220V only, 3phase, Hydraulic motor: 4HP, 220V, 3 phase, Hydraulic tank capacity: 10 Gal, Machine net Weight, LBS ...more

ORDER 15, AGE: 2006 MODEL NUMBER: KBC 280 NA : Capacity, Rounds: 11" (280mm) Capacity, Rectangles: 15-3/4" x 11" (400mm x 280mm) Saw Band: 200" x 1-1/3" (5100mm x 34mm) Cutting Speed: 49 to 295 FPM (15 to 90 M/Min.) Cut-Off Length, Single Stroke: 1/4" to 24" (6mm to 610mm) Bar End Length: Manual -.39" (10mm) Automatic ...more

SERIAL. PP495, RATED TUBE SIZES:, 1-3/4" O.D. x.165" WALL, 1-1/4" O.D. x.120" WALL, 3/4" O.D. x.156" WALL, MIN CAPACITY OF CROSSHEADS(RATED):, #1, 2 & 3. 29.500 LBS @ 3000 PSI, #4. 24,900 LBS @ 3000 PSI, MAX CAPACITY OF CROSSHEADS(RATED):, #1, 2 & 3. 29,500 LBS @ 3000 PSI, $4. 24,900 LBS @ 3000 PSI, POINTING ...more

S:, Delem DA-65 W CNC control5 Axis, CNC, Y1, Y2, X, R, I (hemming axis), plus hard crank crowningPhysical rear and side guarding includedMechanical upper & lower clamping for Trumpf/ Wila ToolsSTI light curtainsFoot pedal with palm button standFour back gauge fingers, MODEL: V170 TRUMABEND, CAPACITY: 13′ ...more

Used in switchgear, machine control cabinets, and fixed electrical installations, the Lapp H07V-K is a HAR-certified single-core stranded copper wire rated 450/750V. Part number 4520145 designates the 1x10 mm2 cross-section in dark blue (RAL 5010) insulation, supplied as a 100-meter coil. The conductor is finely ...more

Lapp article number 4520012 is a single-core H07V-K harmonized hook-up wire rated 450/750V, supplied in a 100-meter (328 ft) cardboard box. The conductor is fine-stranded bare copper with a cross-sectional area of 1 x 2.5 mm² (14 AWG), insulated with black flame-retardant PVC. Cable outer diameter ranges from 3.4 ...more

This listing is for a USED LAPP 21700126., Industrial-grade managed Ethernet switch with 8 RJ45 ports, designed for harsh environments and automation networks. s include VLAN, QoS, redundancy, and wide temperature tolerance. Ideal for smart factory and control cabinet applications., See photos for., Part No: 21700126 ...more

, Manufacturer: Bonak, Materials: CRC, HRC, Yield Strength: 355 MPa, Thickness Range:.039” –.315” (1.00 – 8.00 Mm), Maximum Coil Width: 61” (1550 Mm), Minimum Coil Width: 9.8” (250 Mm), Maximum Coil Weight: 66,000 Lb (30 Metric Tons), Slitting :, Slitter Arbor (Shaft) Diameter: ...more

The Lapp OLFLEX H07V-K, part number 4520002, is a single-core HAR-certified hook-up wire rated at 450/750V AC, supplied on a 100-meter (328 ft) cardboard dispenser spool. Conductor cross-section is 2.5 mm² (14 AWG), constructed with Class 5 fine-stranded bare copper per IEC 60228 and VDE 0295, insulated with ...more

Used in control cabinet wiring, panel assembly, and machine internal circuits designed for compliance with European harmonized standards, the LAPP H07V-K 1G1.5 is a finely stranded single-core PVC hook-up wire rated at 450/750V. Part number 4520001, article number confirmed on original LAPP packaging label. Color is ...more

A single core hook up wire from Lapp (U.I. Lapp GmbH), part number 4520022, wound on a 100-meter (328 ft) spool in the original manufacturer cardboard box. Manufactured January 2020 per label. Color is blue (BU). The wire is built to harmonised European type H07V-K, carrying the HAR certification mark per EN ...more

Used LAPP M08T-2GEN Ethernet Switch available. Ideal for reliable network setups. Condition: used. Suitable for various applications where performance and efficiency are needed. Don't miss out on this opportunity to enhance your network infrastructure., Spec Sheet, LAPP M08T-2GEN, Dimensions. 4X3X3, Weight. 1LBS.

https://youtu.be/g8EQPb4ig-Y?si=9yAKi0a0Z6IG1zmY, Machine, •Table Size – 50” x 10” •T-Slots (number x width x pitch) - 3 x.63" x 2.48" •Travel (X, Y, Z axis) - 31 x 17 x 23.5" •Quill Diameter - 3 15/16" •Maximum Quill Travel - 5” •Spindle Taper - NMTB 40 ...more

Holz-Her Lynx 7511 CNC Router / Holz Her, HolzHer Lynx 7511 CNC Router (subject to buyer verification):Solid welded machine frame with ground prismatic guide systemRack & pinion drive in X-axis, ball screw drive system in Y- and Z-axis1 push buttons for clamping and releasing of work pieces10 vertical boring ...more

SKU: 151263, Model: FlatCom XL DU6240, Year: 2021, Condition: Used, Spindle Taper: SK30, Table Size: 1100 x 1700 mm, Speed: 0 - 24000 rpm, CNC: Yes, Run Time: 23.16 hrs, Electrical :, Voltage: 400 volts, Phase: 3-phase, Amps: 16 amps, Made In: GERMANY, Dimensions: 95.00 (H) x 122.00 (W) x 95.00 (L) inches, Additional ...more

44” X 25” Dual Column Horizontal Bandsaw with Pedestal Mounted Control with 7” Touchscreen, Rotary Base Machine, Powered Miter with Angle Readout, Arm Cant - 7° Permanent, Vises on Both sides of Blade, Adjustable Clamping Force, Adjustable Feed Rate, Adjustable Cutting Pressure, Carbide Blade ...more

For sale: 1998 Euromac CX 1000/30-1250 single-station punch, used condition. s 33-ton capacity, CNC control, hydraulic assisted clamping, and more. include 50" X-axis stroke, 0.25" max sheet thickness, and 220 lbs max sheet weight., Brand: Euromac, Model: CX1000/30-1250, Tonnage: 33, X-axis stroke: 50" + automatic ...more

Saw Horizontal/Single Column/Miter Arm Heavy Duty Production Bandsaw Saw Capacity 14" High x 20" Flat @90, 14" High x 15" Flat @ 45, 14" High x 10" Flat @ 60 (Miter one direction only) Arm Miter Remove locking pin and arm is manually moved to desired degree of cut - locking pin is re-inserted in hole and arm is ...more

Saw Vertical Tilt-Frame Production Band Saw Saw Capacity 18" W x 20.75" H @ 90 (22-1/4 w/o cant) Miter 18" W x 14.25" H @ 45 (L) (15.25 w/o cant) / 18" W x 14" H @ 45 (R) (15.125 w/o cant) / 18" W x 9.75" H @ 60 (L) (10.25 w/o cant) / 18" W x 6.75" H @ 60 (R) (7.25 w/o cant) Blade Size 1-1/4" x 15'6" x.042 THK Arm ...more

For sale is one (1) new unused Sandvik Manual Clamping Unit for Mazak Machines. Part number: C6-TLE-MZ50V., Connection - machine side(ADINTMS): Mazak non-driven turret interface -size MZ50V, Connection - workpiece side (ADINTWS): Coromant Capto (segment clamping) -size C6, Workpiece side connection count(CCONWS): 1 ...more

CANTEK - PCM 120,.Hollow Chisel Mortisers: -- Power stroke of head permits easy, fast, and accurate successive cuts. -- Separate fan blower to keep work clean and free from dust & chips. -- Manual adjustable table height and lateral position. -- Heavy-Duty cast iron construction. -- Convenient centralized control ...more

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Mori Seiki Fanuc CNC Control, Heavy Duty Box Way ...more

Haas VF-3 VMC, 2011 – Side-Mount ATC, High Speed Machining, 15k Spindle, Table Size 48″ X 18″, Maximum Table Load Capacity 3500 Lbs., Spindle Nose to Table Top 4″ – 29″, X – Axis Travel 40″, Y – Axis Travel 20″, Z – Axis Travel 25″, Spindle Nose ...more

High Speed Rapid Traverse: 1260 IPM, Max Bar Capacity: 1.5 (38 mm), Max tool positions: 29, Max. Drilling Diameter: 0.511 (13 mm), Max. tapping diameter: M12, Main Spindle Indexing: 360 (Full C-Axis), Main Spindle Speed: 200 6.000 RPM, Main Spindle Motor: 11 kw, Back Spindle Indexing: 360 (Full C-Axis), Back Spindle ...more

X-Axis Travel: 148"Y-Axis Travel: 61"Z-Axis Travel: 11"Under Bridge Clearance: 14"Spindle Taper: HSK-63Max. Main Spindle Speed: 24,000 RPMMain Spindle Motor: 18 HPSecondary Spindle Speed: 18,000 RPMSecondary Spindle Motor: 25 HPTooling: (2) 12-ATCTable Size  Both Tables Put Together: 61" x 146"(2) Independent ...more

Table size. 35 3/8" X 19 5/8", Tee slots: no. x width x pitch. 5 x.71" x 3.94", Table max load. 1000 lbs., Travels: X x Y x Z. 31" x 18.5" x 21", Max spindle nose to table. 24", Min spindle nose to table. 3 3/8", Max clearance spindle center to column. 19 1/4", Max Rapid speed. X x Y x Z ipm 800 x 800 x 700 ...more

Tube Size Range, O.D. 48.26 mm to 171.45 mm (1.900" to 6-3/4"), I.D. 25.40 mm to 107.95 mm (1" to 4-1/4"), Maximum Length - 10,363.20 mm (34'-0") (Cooling Bed Product), - 9,753.60 mm (32'-0") (Mill Anneal Product), With the exception of the hole in the Elongator drive, the mill is capable, to produce 177.80 mm ...more