Ton: 11.00
Stock # 113319
For Sale by National Machinery Exchange
Surplus Record Dealer Since 1939
Sales / Andreia
973-35...> Show Seller's Phone Number 973-358-7208 Let the seller know you found their listing on Surplus Record!
Description
SPECIFICATIONS
FORMING TONNAGE 11
DISTANCE BETWEEN JAWS:
Maximum Length of Part with Tension Cylinders
fully retracted136" (3,454.4 mm)
Minimum Length of Part with Tension Cylinders
fully extended 10" (254 mm)
TENSION CYLINDER STROKE each Max.10? (254 mm)
Currently has 3" long spacer to reduce stoke to 7" (177.6 mm)
TENSION CYLINDER ROTATION +/- 25 Degrees
ARMS: SWING Simultaneous Arm Motion
Arm swings 10 Forward to 90Back.
WRAPPING SPEED RANGE Adjustable
DIE TABLE:
Working Surface, W x D 36" x 35"
(908.88 x 908.05 mm)
(75-pre drilled & threaded) 5/8" (15.875 mm)
Height Table To Floor 39" (974.725 mm)
MOTOR DRIVE: Wired 440 volts, 3 Phase
Hydraulic Pump10 hp. 220/440 volts
CONTROLS: Hand Push Buttons, with Start and Stop Buttons
EQUIPPED WITH:
1- set 3" (76.2mm) Jaws with Pneumatic Clamping.
17- Miscellaneous sets of Gripper Jaws
7- single Gripper Jaws
COMPLETE FACTORY SAFETY GUARDS
Dimensions 91" (2311.4mm) w x 135"(3429mm) FB 47-1/2" (1206.5mm) Ht
(Opened Width183" (4648.2mm)
Approx. Wt. 7000 lbs.
FORMING TONNAGE 11
DISTANCE BETWEEN JAWS:
Maximum Length of Part with Tension Cylinders
fully retracted136" (3,454.4 mm)
Minimum Length of Part with Tension Cylinders
fully extended 10" (254 mm)
TENSION CYLINDER STROKE each Max.10? (254 mm)
Currently has 3" long spacer to reduce stoke to 7" (177.6 mm)
TENSION CYLINDER ROTATION +/- 25 Degrees
ARMS: SWING Simultaneous Arm Motion
Arm swings 10 Forward to 90Back.
WRAPPING SPEED RANGE Adjustable
DIE TABLE:
Working Surface, W x D 36" x 35"
(908.88 x 908.05 mm)
(75-pre drilled & threaded) 5/8" (15.875 mm)
Height Table To Floor 39" (974.725 mm)
MOTOR DRIVE: Wired 440 volts, 3 Phase
Hydraulic Pump10 hp. 220/440 volts
CONTROLS: Hand Push Buttons, with Start and Stop Buttons
EQUIPPED WITH:
1- set 3" (76.2mm) Jaws with Pneumatic Clamping.
17- Miscellaneous sets of Gripper Jaws
7- single Gripper Jaws
COMPLETE FACTORY SAFETY GUARDS
Dimensions 91" (2311.4mm) w x 135"(3429mm) FB 47-1/2" (1206.5mm) Ht
(Opened Width183" (4648.2mm)
Approx. Wt. 7000 lbs.
Get Your Price from National Machinery Exchange!
Buyers Who Viewed This Listing Also Viewed …
11 Ton, NAS horizontal stretch wrap forming press, 136" part length, extrusion die heads 3" dia
Category: Stretch Forming Machines
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Nas
NAS 11 ton STRETCH WRAP FORMING PRESS, FORMING TONNAGE 11, DISTANCE BETWEEN JAWS:, Maximum Length of Part with Tension Cylinders, fully retracted 136" (3,454.4 mm), Minimum Length of Part with Tension Cylinders, fully extended 10" (254 mm), TENSION CYLINDER STROKE each Max.10″ (254 mm), Currently has ...more
12.5 Ton, Hufford #A-5, extrusion stretch forming press long arm machine
Category: Stretch Forming Machines
Seller: RAAR Group USA
Location: Riverside, CA
Mfr: Hufford
Model: A-5
Hufford A-5 Extrusion Stretch Forming Press, Long Arm Machine, Capacity 12.5 Tons Table Dimensions 30” x 65”, Table Height 35.5”, Maximum Part Length Formed 219”, Minimum Part Length Formed 10”, Maximum Sheet Width Formed 10”, Maximum Die Height 20”, Maximum Die Length @ 180 ...more
12 Ton, Hufford #A5, CNC Extrusion Stretch-wrap Former, 115" jaw distance, 40" die length, 42" x 44 working surface
Category: Stretch Forming Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hufford
Model: A5
1 - used L&F HUFFORD CNC EXTRUSION STRETCH WRAP FORMING MACHINE, Model A-5, Serial Number 81127-1, DeMott Controls Model D2732-001, Serial Number 2732-2, FORMING TONNAGE 12, JAW AXIAL ROTATION +/- 180 Degrees, DISTANCE BETWEEN JAWS:, Max Length of Part w/ Tension Cylinders fully retracted 115" (2,921 mm), Min Length ...more
17.5 Ton, Hufford #A-10, stretch wrap forming machine, 30" x65" tbl., tooling
Category: Stretch Forming Machines
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Hufford
Model: A-10
Capacity 17.5 Tons Table Dimensions 30" x 65" Table Height 35.5" Maximum Part Length Formed 219" Standard Arm Minimum Part Length Formed 10" Maximum Die Height 20" Maximum Die Length 180 Deg. 68" Minimum Die Length 180 Deg. 20" Tension Cylinder Stroke 18.5" Operating Pressure Maximum 2,000 PSI Overall Floor Space ...more
20 Ton, Cyril Bath #Type-20T, 20-200kN stretching force, 30" x150" part length, 12 Axes, Cyril Bath Control, #43149
Category: Stretch Forming Machines
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Cyril Bath
Model: TYPE 20T
Product, Tonnage 20 Ton Component Length 30" - 150" Number Of Axes 12 Auxiliary Axes 4 Stretching Force 20 - 200 kN Bending Angle 2 x 95° Rotation Stretching Cylinder 2 x 45°/225°, Cyril Bath Control Rexroth Hydraulics 2 - 60 HP Hydraulic Pumps 168 HP Motor.
